Fix tests workflow

Otherwise they'll be leaked due to the filtering code only respecting
the stable identifiers for private read receipts.

.ci/complement_package.gotpl

@@ -27,10 +27,10 @@ which is under the Unlicense licence.
         {{- . -}}{{- "\n" -}}
     {{- end -}}
     {{- with .TestCases -}}
-        {{- /* Failing tests are first */ -}}
+        {{- /* Passing tests are first */ -}}
         {{- range . -}}
-            {{- if and (ne .Result "PASS") (ne .Result "SKIP") -}}
-                ::group::{{ "\033" }}[0;31m❌{{ " " }}{{- .Name -}}
+            {{- if eq .Result "PASS" -}}
+                ::group::{{ "\033" }}[0;32m✅{{ " " }}{{- .Name -}}
                 {{- "\033" -}}[0;37m ({{if $settings.ShowTestStatus}}{{.Result}}; {{end}}{{ .Duration -}}
                 {{- with .Coverage -}}
                     , coverage: {{ . }}%
@@ -47,7 +47,6 @@ which is under the Unlicense licence.
             {{- end -}}
         {{- end -}}
 
-
         {{- /* Then skipped tests are second */ -}}
         {{- range . -}}
             {{- if eq .Result "SKIP" -}}
@@ -68,11 +67,10 @@ which is under the Unlicense licence.
             {{- end -}}
         {{- end -}}
 
-
-        {{- /* Then passing tests are last */ -}}
+        {{- /* and failing tests are last */ -}}
         {{- range . -}}
-            {{- if eq .Result "PASS" -}}
-                ::group::{{ "\033" }}[0;32m✅{{ " " }}{{- .Name -}}
+            {{- if and (ne .Result "PASS") (ne .Result "SKIP") -}}
+                ::group::{{ "\033" }}[0;31m❌{{ " " }}{{- .Name -}}
                 {{- "\033" -}}[0;37m ({{if $settings.ShowTestStatus}}{{.Result}}; {{end}}{{ .Duration -}}
                 {{- with .Coverage -}}
                     , coverage: {{ . }}%

.ci/scripts/gotestfmt

@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# wraps `gotestfmt`, hiding output from successful packages unless
+# all tests passed.
+
+set -o pipefail
+set -e
+
+# tee the test results to a log, whilst also piping them into gotestfmt,
+# telling it to hide successful results, so that we can clearly see
+# unsuccessful results.
+tee complement.log | gotestfmt -hide successful-packages
+
+# gotestfmt will exit non-zero if there were any failures, so if we got to this
+# point, we must have had a successful result.
+echo "All tests successful; showing all test results"
+
+# Pipe the test results back through gotestfmt, showing all results.
+# The log file consists of JSON lines giving the test results, interspersed
+# with regular stdout lines (including reports of downloaded packages).
+grep '^{"Time":' complement.log | gotestfmt

.codecov.yml

@@ -1,14 +0,0 @@
-comment: off
-
-coverage:
-  status:
-    project:
-      default:
-        target: 0  # Target % coverage, can be auto. Turned off for now
-        threshold: null
-        base: auto
-    patch:
-      default:
-        target: 0
-        threshold: null
-        base: auto

.coveragerc

@@ -1,8 +1,13 @@
 [run]
 branch = True
 parallel = True
-include=$TOP/synapse/*
+include = $TOP/synapse/*
 data_file = $TOP/.coverage
 
 [report]
 precision = 2
+
+[paths]
+source =
+    synapse
+    /synapse/synapse

.github/workflows/latest_deps.yml

@@ -135,11 +135,42 @@ jobs:
             /logs/**/*.log*
 
 
-  # TODO: run complement (as with twisted trunk, see #12473).
+  complement:
+    if: "${{ !failure() && !cancelled() }}"
+    runs-on: ubuntu-latest
 
-  # open an issue if the build fails, so we know about it.
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - arrangement: monolith
+            database: SQLite
+
+          - arrangement: monolith
+            database: Postgres
+
+          - arrangement: workers
+            database: Postgres
+
+    steps:
+      - name: Run actions/checkout@v2 for synapse
+        uses: actions/checkout@v2
+        with:
+          path: synapse
+
+      - name: Prepare Complement's Prerequisites
+        run: synapse/.ci/scripts/setup_complement_prerequisites.sh
+
+      - run: |
+          set -o pipefail
+          TEST_ONLY_IGNORE_POETRY_LOCKFILE=1 POSTGRES=${{ (matrix.database == 'Postgres') && 1 || '' }} WORKERS=${{ (matrix.arrangement == 'workers') && 1 || '' }} COMPLEMENT_DIR=`pwd`/complement synapse/scripts-dev/complement.sh -json 2>&1 | synapse/.ci/scripts/gotestfmt
+        shell: bash
+        name: Run Complement Tests
+
+  # Open an issue if the build fails, so we know about it.
+  # Only do this if we're not experimenting with this action in a PR.
   open-issue:
-    if: failure()
+    if: "failure() && github.event_name != 'push' && github.event_name != 'pull_request'"
     needs:
       # TODO: should mypy be included here? It feels more brittle than the other two.
       - mypy

.github/workflows/sonarqube.yml

@@ -0,0 +1,32 @@
+name: SonarQube
+on:
+  workflow_run:
+    workflows: [ "Tests" ]
+    types:
+      - completed
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.workflow_run.head_branch }}
+  cancel-in-progress: true
+jobs:
+  sonarqube:
+    name: SonarQube
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+        with:
+          repository: ${{ github.event.workflow_run.head_repository.full_name }}
+          ref: ${{ github.event.workflow_run.head_branch }} # checkout commit that triggered this workflow
+          fetch-depth: 0 # Shallow clones should be disabled for a better relevancy of analysis
+      - uses: matrix-org/setup-python-poetry@v1
+      - name: SonarCloud Scan
+        uses: matrix-org/sonarcloud-workflow-action@v2.2
+        with:
+          is_pr: ${{ github.event.workflow_run.event == 'pull_request' }}
+          repository: ${{ github.event.workflow_run.head_repository.full_name }}
+          version_cmd: 'poetry version --short'
+          branch: ${{ github.event.workflow_run.head_branch }}
+          revision: ${{ github.event.workflow_run.head_sha }}
+          token: ${{ secrets.SONAR_TOKEN }}
+          coverage_run_id: ${{ github.event.workflow_run.id }}
+          coverage_workflow_name: tests.yml
+          skip_checkout: true

.github/workflows/tests.yml

@@ -10,53 +10,65 @@ concurrency:
   cancel-in-progress: true
 
 jobs:
-  check-sampleconfig:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - uses: actions/setup-python@v2
-      - run: pip install .
-      - run: scripts-dev/generate_sample_config.sh --check
-      - run: scripts-dev/config-lint.sh
-
-  check-schema-delta:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - uses: actions/setup-python@v2
-      - run: "pip install 'click==8.1.1' 'GitPython>=3.1.20'"
-      - run: scripts-dev/check_schema_delta.py --force-colors
-
-  lint:
-    uses: "matrix-org/backend-meta/.github/workflows/python-poetry-ci.yml@v1"
-    with:
-      typechecking-extras: "all"
-
-  lint-crlf:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - name: Check line endings
-        run: scripts-dev/check_line_terminators.sh
-
-  lint-newsfile:
-    if: ${{ github.base_ref == 'develop'  || contains(github.base_ref, 'release-') }}
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-        with:
-          ref: ${{ github.event.pull_request.head.sha }}
-          fetch-depth: 0
-      - uses: actions/setup-python@v2
-      - run: "pip install 'towncrier>=18.6.0rc1'"
-      - run: scripts-dev/check-newsfragment.sh
-        env:
-          PULL_REQUEST_NUMBER: ${{ github.event.number }}
-
+#  check-sampleconfig:
+#    runs-on: ubuntu-latest
+#    steps:
+#      - uses: actions/checkout@v2
+#      - uses: actions/setup-python@v2
+#      - run: pip install .
+#      - run: scripts-dev/generate_sample_config.sh --check
+#      - run: scripts-dev/config-lint.sh
+#
+#  check-schema-delta:
+#    runs-on: ubuntu-latest
+#    steps:
+#      - uses: actions/checkout@v2
+#      - uses: actions/setup-python@v2
+#      - run: "pip install 'click==8.1.1' 'GitPython>=3.1.20'"
+#      - run: scripts-dev/check_schema_delta.py --force-colors
+#
+#  lint:
+#    uses: "matrix-org/backend-meta/.github/workflows/python-poetry-ci.yml@v1"
+#    with:
+#      typechecking-extras: "all"
+#
+#  lint-crlf:
+#    runs-on: ubuntu-latest
+#    steps:
+#      - uses: actions/checkout@v2
+#      - name: Check line endings
+#        run: scripts-dev/check_line_terminators.sh
+#
+#  lint-newsfile:
+#    if: ${{ github.base_ref == 'develop'  || contains(github.base_ref, 'release-') }}
+#    runs-on: ubuntu-latest
+#    steps:
+#      - uses: actions/checkout@v2
+#        with:
+#          ref: ${{ github.event.pull_request.head.sha }}
+#          fetch-depth: 0
+#      - uses: actions/setup-python@v2
+#      - run: "pip install 'towncrier>=18.6.0rc1'"
+#      - run: scripts-dev/check-newsfragment.sh
+#        env:
+#          PULL_REQUEST_NUMBER: ${{ github.event.number }}
+#
+#  lint-pydantic:
+#    runs-on: ubuntu-latest
+#    steps:
+#      - uses: actions/checkout@v2
+#        with:
+#          ref: ${{ github.event.pull_request.head.sha }}
+#          fetch-depth: 0
+#      - uses: matrix-org/setup-python-poetry@v1
+#        with:
+#          extras: "all"
+#      - run: poetry run scripts-dev/check_pydantic_models.py
+#
   # Dummy step to gate other tests on without repeating the whole list
   linting-done:
     if: ${{ !cancelled() }} # Run this even if prior jobs were skipped
-    needs: [lint, lint-crlf, lint-newsfile, check-sampleconfig, check-schema-delta]
+#    needs: [lint, lint-crlf, lint-newsfile, lint-pydantic, check-sampleconfig, check-schema-delta]
     runs-on: ubuntu-latest
     steps:
       - run: "true"
@@ -65,11 +77,23 @@ jobs:
     if: ${{ !cancelled() && !failure() }} # Allow previous steps to be skipped, but not fail
     needs: linting-done
     runs-on: ubuntu-latest
+    env:
+      TOP: ${{ github.workspace }}
     strategy:
       matrix:
         python-version: ["3.7", "3.8", "3.9", "3.10"]
         database: ["sqlite"]
         extras: ["all"]
+        is_pr:
+          - ${{ startsWith(github.ref, 'refs/pull/') }}
+
+        # If we're a PR then we only test min and max python.
+        exclude:
+          - is_pr: true
+            python-version: 3.8
+          - is_pr: true
+            python-version: 3.9
+
         include:
           # Newest Python without optional deps
           - python-version: "3.10"
@@ -105,7 +129,7 @@ jobs:
         if: ${{ matrix.postgres-version }}
         timeout-minutes: 2
         run: until pg_isready -h localhost; do sleep 1; done
-      - run: poetry run trial --jobs=2 tests
+      - run: poetry run coverage run --branch --parallel-mode -m twisted.trial --jobs=2 tests
         env:
           SYNAPSE_POSTGRES: ${{ matrix.database == 'postgres' || '' }}
           SYNAPSE_POSTGRES_HOST: localhost
@@ -123,33 +147,39 @@ jobs:
           -exec cat {} \;
           -exec echo "::endgroup::" \;
           || true
-
-  trial-olddeps:
-    # Note: sqlite only; no postgres
-    if: ${{ !cancelled() && !failure() }} # Allow previous steps to be skipped, but not fail
-    needs: linting-done
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - name: Test with old deps
-        uses: docker://ubuntu:focal # For old python and sqlite
-        # Note: focal seems to be using 3.8, but the oldest is 3.7?
-        # See https://github.com/matrix-org/synapse/issues/12343
+      - name: Upload coverage
+        uses: actions/upload-artifact@v3
         with:
-          workdir: /github/workspace
-          entrypoint: .ci/scripts/test_old_deps.sh
-      - name: Dump logs
-        # Logs are most useful when the command fails, always include them.
-        if: ${{ always() }}
-        # Note: Dumps to workflow logs instead of using actions/upload-artifact
-        #       This keeps logs colocated with failing jobs
-        #       It also ignores find's exit code; this is a best effort affair
-        run: >-
-          find _trial_temp -name '*.log'
-          -exec echo "::group::{}" \;
-          -exec cat {} \;
-          -exec echo "::endgroup::" \;
-          || true
+          name: coverage
+          path: .coverage.*
+          retention-days: 1
+
+#  trial-olddeps:
+#    # Note: sqlite only; no postgres
+#    if: ${{ !cancelled() && !failure() }} # Allow previous steps to be skipped, but not fail
+#    needs: linting-done
+#    runs-on: ubuntu-latest
+#    steps:
+#      - uses: actions/checkout@v2
+#      - name: Test with old deps
+#        uses: docker://ubuntu:focal # For old python and sqlite
+#        # Note: focal seems to be using 3.8, but the oldest is 3.7?
+#        # See https://github.com/matrix-org/synapse/issues/12343
+#        with:
+#          workdir: /github/workspace
+#          entrypoint: .ci/scripts/test_old_deps.sh
+#      - name: Dump logs
+#        # Logs are most useful when the command fails, always include them.
+#        if: ${{ always() }}
+#        # Note: Dumps to workflow logs instead of using actions/upload-artifact
+#        #       This keeps logs colocated with failing jobs
+#        #       It also ignores find's exit code; this is a best effort affair
+#        run: >-
+#          find _trial_temp -name '*.log'
+#          -exec echo "::group::{}" \;
+#          -exec cat {} \;
+#          -exec echo "::endgroup::" \;
+#          || true
 
   trial-pypy:
     # Very slow; only run if the branch name includes 'pypy'
@@ -199,7 +229,11 @@ jobs:
         WORKERS: ${{ matrix.workers && 1 }}
         REDIS: ${{ matrix.redis && 1 }}
         BLACKLIST: ${{ matrix.workers && 'synapse-blacklist-with-workers' }}
-        TOP: ${{ github.workspace }}
+        # $TOP is usually defined as {{ github.workspace }}, however in this case we're
+        # operating in the context of the container, where the path defined by
+        # github.workspace doesn't exist, and the equivalent path is defined as /synapse
+        # in synapse_sytest.sh.
+        TOP: "/synapse"
 
     strategy:
       fail-fast: false
@@ -244,6 +278,13 @@ jobs:
           path: |
             /logs/results.tap
             /logs/**/*.log*
+      - name: Upload coverage
+        uses: actions/upload-artifact@v3
+        with:
+          name: coverage
+          path: /coverage/.coverage.*
+          retention-days: 1
+
 
   export-data:
     if: ${{ !failure() && !cancelled() }} # Allow previous steps to be skipped, but not fail
@@ -271,7 +312,6 @@ jobs:
       - run: sudo apt-get -qq install xmlsec1
       - uses: matrix-org/setup-python-poetry@v1
         with:
-          python-version: ${{ matrix.python-version }}
           extras: "postgres"
       - run: .ci/scripts/test_export_data_command.sh
 
@@ -328,6 +368,9 @@ jobs:
           - arrangement: monolith
             database: Postgres
 
+          - arrangement: workers
+            database: Postgres
+
     steps:
       - name: Run actions/checkout@v2 for synapse
         uses: actions/checkout@v2
@@ -339,48 +382,51 @@ jobs:
 
       - run: |
           set -o pipefail
-          POSTGRES=${{ (matrix.database == 'Postgres') && 1 || '' }} WORKERS=${{ (matrix.arrangement == 'workers') && 1 || '' }} COMPLEMENT_DIR=`pwd`/complement synapse/scripts-dev/complement.sh -json 2>&1 | gotestfmt
+          POSTGRES=${{ (matrix.database == 'Postgres') && 1 || '' }} WORKERS=${{ (matrix.arrangement == 'workers') && 1 || '' }} COMPLEMENT_DIR=`pwd`/complement synapse/scripts-dev/complement.sh -json 2>&1 | synapse/.ci/scripts/gotestfmt
         shell: bash
         name: Run Complement Tests
 
-  # XXX When complement with workers is stable, move this back into the standard
-  #     "complement" matrix above.
-  #
-  # See https://github.com/matrix-org/synapse/issues/13161
-  complement-workers:
-    if: "${{ !failure() && !cancelled() }}"
-    needs: linting-done
+  # a job which combines the coverage reports from all trials runs, ready for upload to SonarQube.
+  coverage:
+    needs:
+      - trial
+      - sytest
     runs-on: ubuntu-latest
-
+    env:
+      TOP: ${{ github.workspace }}
     steps:
-      - name: Run actions/checkout@v2 for synapse
-        uses: actions/checkout@v2
+      - uses: actions/checkout@v2
+      - uses: actions/download-artifact@v3
         with:
-          path: synapse
-
-      - name: Prepare Complement's Prerequisites
-        run: synapse/.ci/scripts/setup_complement_prerequisites.sh
-
-      - run: |
-          set -o pipefail
-          POSTGRES=1 WORKERS=1 COMPLEMENT_DIR=`pwd`/complement synapse/scripts-dev/complement.sh -json 2>&1 | gotestfmt
-        shell: bash
-        name: Run Complement Tests
+          name: coverage
+          path: .
+      - uses: matrix-org/setup-python-poetry@v1
+      - name: Combine coverage reports
+        run: poetry run coverage combine
+      - name: Write coverage to XML
+        run: poetry run coverage xml
+      - name: Upload combined coverage
+        uses: actions/upload-artifact@v3
+        with:
+          name: coverage
+          path: coverage.xml
+          retention-days: 1
 
   # a job which marks all the other jobs as complete, thus allowing PRs to be merged.
   tests-done:
     if: ${{ always() }}
     needs:
-      - check-sampleconfig
-      - lint
-      - lint-crlf
-      - lint-newsfile
+#      - check-sampleconfig
+#      - lint
+#      - lint-crlf
+#      - lint-newsfile
       - trial
-      - trial-olddeps
+#      - trial-olddeps
       - sytest
       - export-data
       - portdb
       - complement
+      - coverage
     runs-on: ubuntu-latest
     steps:
       - uses: matrix-org/done-action@v2

.github/workflows/triage-incoming.yml

@@ -0,0 +1,28 @@
+name: Move new issues into the issue triage board
+
+on:
+  issues:
+    types: [ opened ]
+
+jobs:
+  add_new_issues:
+    name: Add new issues to the triage board
+    runs-on: ubuntu-latest
+    steps:
+      - uses: octokit/graphql-action@v2.x
+        id: add_to_project
+        with:
+          headers: '{"GraphQL-Features": "projects_next_graphql"}'
+          query: |
+              mutation add_to_project($projectid:ID!,$contentid:ID!) {
+                addProjectV2ItemById(input: {projectId: $projectid contentId: $contentid}) {
+                item {
+                  id
+                  }
+                }
+              }
+          projectid: ${{ env.PROJECT_ID }}
+          contentid: ${{ github.event.issue.node_id }}
+        env:
+          PROJECT_ID: "PVT_kwDOAIB0Bs4AFDdZ"
+          GITHUB_TOKEN: ${{ secrets.ELEMENT_BOT_TOKEN }}

.github/workflows/triage_labelled.yml

@@ -0,0 +1,44 @@
+name: Move labelled issues to correct projects
+
+on:
+  issues:
+    types: [ labeled ]
+
+jobs:
+  move_needs_info:
+    name: Move X-Needs-Info on the triage board
+    runs-on: ubuntu-latest
+    if: >
+      contains(github.event.issue.labels.*.name, 'X-Needs-Info')
+    steps:
+      - uses: octokit/graphql-action@v2.x
+        id: add_to_project
+        with:
+          headers: '{"GraphQL-Features": "projects_next_graphql"}'
+          query: |
+            mutation {
+              updateProjectV2ItemFieldValue(
+                input: {
+                  projectId: $projectid
+                  itemId: $contentid
+                  fieldId: $fieldid
+                  value: {
+                    singleSelectOptionId: "Todo"
+                  }
+                }
+              ) {
+                projectV2Item {
+                  id
+                }
+              }
+            }
+
+          projectid: ${{ env.PROJECT_ID }}
+          contentid: ${{ github.event.issue.node_id }}
+          fieldid: ${{ env.FIELD_ID }}
+          optionid: ${{ env.OPTION_ID }}
+        env:
+          PROJECT_ID: "PVT_kwDOAIB0Bs4AFDdZ"
+          GITHUB_TOKEN: ${{ secrets.ELEMENT_BOT_TOKEN }}
+          FIELD_ID: "PVTSSF_lADOAIB0Bs4AFDdZzgC6ZA4"
+          OPTION_ID: "ba22e43c"

.github/workflows/twisted_trunk.yml

@@ -137,7 +137,7 @@ jobs:
 
       - run: |
           set -o pipefail
-          TEST_ONLY_SKIP_DEP_HASH_VERIFICATION=1 POSTGRES=${{ (matrix.database == 'Postgres') && 1 || '' }} WORKERS=${{ (matrix.arrangement == 'workers') && 1 || '' }} COMPLEMENT_DIR=`pwd`/complement synapse/scripts-dev/complement.sh -json 2>&1 | gotestfmt
+          TEST_ONLY_SKIP_DEP_HASH_VERIFICATION=1 POSTGRES=${{ (matrix.database == 'Postgres') && 1 || '' }} WORKERS=${{ (matrix.arrangement == 'workers') && 1 || '' }} COMPLEMENT_DIR=`pwd`/complement synapse/scripts-dev/complement.sh -json 2>&1 | synapse/.ci/scripts/gotestfmt
         shell: bash
         name: Run Complement Tests
 

CHANGES.md

@@ -1,7 +1,225 @@
+Synapse 1.66.0 (2022-08-31)
+===========================
+
+No significant changes since 1.66.0rc2.
+
+This release removes the ability for homeservers to delegate email ownership
+verification and password reset confirmation to identity servers. This removal
+was originally planned for Synapse 1.64, but was later deferred until now. See
+the [upgrade notes](https://matrix-org.github.io/synapse/v1.66/upgrade.html#upgrading-to-v1660) for more details.
+
+Deployments with multiple workers should note that the direct TCP replication
+configuration was deprecated in Synapse v1.18.0 and will be removed in Synapse
+v1.67.0. In particular, the TCP `replication` [listener](https://matrix-org.github.io/synapse/v1.66/usage/configuration/config_documentation.html#listeners)
+type (not to be confused with the `replication` resource on the `http` listener
+type) and the `worker_replication_port` config option will be removed .
+
+To migrate to Redis, add the [`redis` config](https://matrix-org.github.io/synapse/v1.66/workers.html#shared-configuration),
+then remove the TCP `replication` listener from config of the master and
+`worker_replication_port` from worker config. Note that a HTTP listener with a
+`replication` resource is still required. See the
+[worker documentation](https://matrix-org.github.io/synapse/v1.66/workers.html)
+for more details.
+
+
+Synapse 1.66.0rc2 (2022-08-30)
+==============================
+
+Bugfixes
+--------
+
+- Fix a bug introduced in Synapse 1.66.0rc1 where the new rate limit metrics were misreported (`synapse_rate_limit_sleep_affected_hosts`, `synapse_rate_limit_reject_affected_hosts`). ([\#13649](https://github.com/matrix-org/synapse/issues/13649))
+
+
+Synapse 1.66.0rc1 (2022-08-23)
+==============================
+
+Features
+--------
+
+- Improve validation of request bodies for the following client-server API endpoints: [`/account/password`](https://spec.matrix.org/v1.3/client-server-api/#post_matrixclientv3accountpassword), [`/account/password/email/requestToken`](https://spec.matrix.org/v1.3/client-server-api/#post_matrixclientv3accountpasswordemailrequesttoken), [`/account/deactivate`](https://spec.matrix.org/v1.3/client-server-api/#post_matrixclientv3accountdeactivate) and [`/account/3pid/email/requestToken`](https://spec.matrix.org/v1.3/client-server-api/#post_matrixclientv3account3pidemailrequesttoken). ([\#13188](https://github.com/matrix-org/synapse/issues/13188), [\#13563](https://github.com/matrix-org/synapse/issues/13563))
+- Add forgotten status to [Room Details Admin API](https://matrix-org.github.io/synapse/latest/admin_api/rooms.html#room-details-api). ([\#13503](https://github.com/matrix-org/synapse/issues/13503))
+- Add an experimental implementation for [MSC3852 (Expose user agents on `Device`)](https://github.com/matrix-org/matrix-spec-proposals/pull/3852). ([\#13549](https://github.com/matrix-org/synapse/issues/13549))
+- Add `org.matrix.msc2716v4` experimental room version with updated content fields. Part of [MSC2716 (Importing history)](https://github.com/matrix-org/matrix-spec-proposals/pull/2716).  ([\#13551](https://github.com/matrix-org/synapse/issues/13551))
+- Add support for compression to federation responses. ([\#13537](https://github.com/matrix-org/synapse/issues/13537))
+- Improve performance of sending messages in rooms with thousands of local users. ([\#13522](https://github.com/matrix-org/synapse/issues/13522), [\#13547](https://github.com/matrix-org/synapse/issues/13547))
+
+
+Bugfixes
+--------
+
+- Faster room joins: make `/joined_members` block whilst the room is partial stated. ([\#13514](https://github.com/matrix-org/synapse/issues/13514))
+- Fix a bug introduced in Synapse 1.21.0 where the [`/event_reports` Admin API](https://matrix-org.github.io/synapse/develop/admin_api/event_reports.html) could return a total count which was larger than the number of results you can actually query for. ([\#13525](https://github.com/matrix-org/synapse/issues/13525))
+- Fix a bug introduced in Synapse 1.52.0 where sending server notices fails if `max_avatar_size` or `allowed_avatar_mimetypes` is set and not `system_mxid_avatar_url`. ([\#13566](https://github.com/matrix-org/synapse/issues/13566))
+- Fix a bug where the `opentracing.force_tracing_for_users` config option would not apply to [`/sendToDevice`](https://spec.matrix.org/v1.3/client-server-api/#put_matrixclientv3sendtodeviceeventtypetxnid) and [`/keys/upload`](https://spec.matrix.org/v1.3/client-server-api/#post_matrixclientv3keysupload) requests. ([\#13574](https://github.com/matrix-org/synapse/issues/13574))
+
+
+Improved Documentation
+----------------------
+
+- Add `openssl` example for generating registration HMAC digest. ([\#13472](https://github.com/matrix-org/synapse/issues/13472))
+- Tidy up Synapse's README. ([\#13491](https://github.com/matrix-org/synapse/issues/13491))
+- Document that event purging related to the `redaction_retention_period` config option is executed only every 5 minutes. ([\#13492](https://github.com/matrix-org/synapse/issues/13492))
+- Add a warning to retention documentation regarding the possibility of database corruption. ([\#13497](https://github.com/matrix-org/synapse/issues/13497))
+- Document that the `DOCKER_BUILDKIT=1` flag is needed to build the docker image. ([\#13515](https://github.com/matrix-org/synapse/issues/13515))
+- Add missing links in `user_consent` section of configuration manual. ([\#13536](https://github.com/matrix-org/synapse/issues/13536))
+- Fix the doc and some warnings that were referring to the nonexistent `custom_templates_directory` setting (instead of `custom_template_directory`). ([\#13538](https://github.com/matrix-org/synapse/issues/13538))
+
+
+Deprecations and Removals
+-------------------------
+
+- Remove the ability for homeservers to delegate email ownership verification
+  and password reset confirmation to identity servers. See [upgrade notes](https://matrix-org.github.io/synapse/v1.66/upgrade.html#upgrading-to-v1660) for more details.
+
+Internal Changes
+----------------
+
+### Faster room joins
+
+- Update the rejected state of events during de-partial-stating. ([\#13459](https://github.com/matrix-org/synapse/issues/13459))
+- Avoid blocking lazy-loading `/sync`s during partial joins due to remote memberships. Pull remote memberships from auth events instead of the room state. ([\#13477](https://github.com/matrix-org/synapse/issues/13477))
+- Refuse to start when faster joins is enabled on a deployment with workers, since worker configurations are not currently supported. ([\#13531](https://github.com/matrix-org/synapse/issues/13531))
+
+### Metrics and tracing
+
+- Allow use of both `@trace` and `@tag_args` stacked on the same function. ([\#13453](https://github.com/matrix-org/synapse/issues/13453))
+- Instrument the federation/backfill part of `/messages` for understandable traces in Jaeger. ([\#13489](https://github.com/matrix-org/synapse/issues/13489))
+- Instrument `FederationStateIdsServlet` (`/state_ids`) for understandable traces in Jaeger. ([\#13499](https://github.com/matrix-org/synapse/issues/13499), [\#13554](https://github.com/matrix-org/synapse/issues/13554))
+- Track HTTP response times over 10 seconds from `/messages` (`synapse_room_message_list_rest_servlet_response_time_seconds`). ([\#13533](https://github.com/matrix-org/synapse/issues/13533))
+- Add metrics to track how the rate limiter is affecting requests (sleep/reject). ([\#13534](https://github.com/matrix-org/synapse/issues/13534), [\#13541](https://github.com/matrix-org/synapse/issues/13541))
+- Add metrics to time how long it takes us to do backfill processing (`synapse_federation_backfill_processing_before_time_seconds`, `synapse_federation_backfill_processing_after_time_seconds`). ([\#13535](https://github.com/matrix-org/synapse/issues/13535), [\#13584](https://github.com/matrix-org/synapse/issues/13584))
+- Add metrics to track rate limiter queue timing (`synapse_rate_limit_queue_wait_time_seconds`). ([\#13544](https://github.com/matrix-org/synapse/issues/13544))
+- Update metrics to track `/messages` response time by room size. ([\#13545](https://github.com/matrix-org/synapse/issues/13545))
+
+### Everything else
+
+- Refactor methods in `synapse.api.auth.Auth` to use `Requester` objects everywhere instead of user IDs. ([\#13024](https://github.com/matrix-org/synapse/issues/13024))
+- Clean-up tests for notifications. ([\#13471](https://github.com/matrix-org/synapse/issues/13471))
+- Add some miscellaneous comments to document sync, especially around `compute_state_delta`. ([\#13474](https://github.com/matrix-org/synapse/issues/13474))
+- Use literals in place of `HTTPStatus` constants in tests. ([\#13479](https://github.com/matrix-org/synapse/issues/13479), [\#13488](https://github.com/matrix-org/synapse/issues/13488))
+- Add comments about how event push actions are rotated. ([\#13485](https://github.com/matrix-org/synapse/issues/13485))
+- Modify HTML template content to better support mobile devices' screen sizes. ([\#13493](https://github.com/matrix-org/synapse/issues/13493))
+- Add a linter script which will reject non-strict types in Pydantic models. ([\#13502](https://github.com/matrix-org/synapse/issues/13502))
+- Reduce the number of tests using legacy TCP replication. ([\#13543](https://github.com/matrix-org/synapse/issues/13543))
+- Allow specifying additional request fields when using the `HomeServerTestCase.login` helper method. ([\#13549](https://github.com/matrix-org/synapse/issues/13549))
+- Make `HomeServerTestCase` load any configured homeserver modules automatically. ([\#13558](https://github.com/matrix-org/synapse/issues/13558))
+
+
+Synapse 1.65.0 (2022-08-16)
+===========================
+
+No significant changes since 1.65.0rc2.
+
+
+Synapse 1.65.0rc2 (2022-08-11)
+==============================
+
+Internal Changes
+----------------
+
+- Revert 'Remove the unspecced `room_id` field in the `/hierarchy` response. ([\#13365](https://github.com/matrix-org/synapse/issues/13365))' to give more time for clients to update. ([\#13501](https://github.com/matrix-org/synapse/issues/13501))
+
+
+Synapse 1.65.0rc1 (2022-08-09)
+==============================
+
+Features
+--------
+
+- Add support for stable prefixes for [MSC2285 (private read receipts)](https://github.com/matrix-org/matrix-spec-proposals/pull/2285). ([\#13273](https://github.com/matrix-org/synapse/issues/13273))
+- Add new unstable error codes `ORG.MATRIX.MSC3848.ALREADY_JOINED`, `ORG.MATRIX.MSC3848.NOT_JOINED`, and `ORG.MATRIX.MSC3848.INSUFFICIENT_POWER` described in [MSC3848](https://github.com/matrix-org/matrix-spec-proposals/pull/3848). ([\#13343](https://github.com/matrix-org/synapse/issues/13343))
+- Use stable prefixes for [MSC3827](https://github.com/matrix-org/matrix-spec-proposals/pull/3827). ([\#13370](https://github.com/matrix-org/synapse/issues/13370))
+- Add a new module API method to translate a room alias into a room ID. ([\#13428](https://github.com/matrix-org/synapse/issues/13428))
+- Add a new module API method to create a room. ([\#13429](https://github.com/matrix-org/synapse/issues/13429))
+- Add remote join capability to the module API's `update_room_membership` method (in a backwards compatible manner). ([\#13441](https://github.com/matrix-org/synapse/issues/13441))
+
+
+Bugfixes
+--------
+
+- Update the version of the LDAP3 auth provider module included in the `matrixdotorg/synapse` DockerHub images and the Debian packages hosted on packages.matrix.org to 0.2.2. This version fixes a regression in the module. ([\#13470](https://github.com/matrix-org/synapse/issues/13470))
+- Fix a bug introduced in Synapse v1.41.0 where the `/hierarchy` API returned non-standard information (a `room_id` field under each entry in `children_state`) (this was reverted in v1.65.0rc2, see changelog notes above). ([\#13365](https://github.com/matrix-org/synapse/issues/13365))
+- Fix a bug introduced in Synapse 0.24.0 that would respond with the wrong error status code to `/joined_members` requests when the requester is not a current member of the room. Contributed by @andrewdoh. ([\#13374](https://github.com/matrix-org/synapse/issues/13374))
+- Fix bug in handling of typing events for appservices. Contributed by Nick @ Beeper (@fizzadar). ([\#13392](https://github.com/matrix-org/synapse/issues/13392))
+- Fix a bug introduced in Synapse 1.57.0 where rooms listed in `exclude_rooms_from_sync` in the configuration file would not be properly excluded from incremental syncs. ([\#13408](https://github.com/matrix-org/synapse/issues/13408))
+- Fix a bug in the experimental faster-room-joins support which could cause it to get stuck in an infinite loop. ([\#13353](https://github.com/matrix-org/synapse/issues/13353))
+- Faster room joins: fix a bug which caused rejected events to become un-rejected during state syncing. ([\#13413](https://github.com/matrix-org/synapse/issues/13413))
+- Faster room joins: fix error when running out of servers to sync partial state with, so that Synapse raises the intended error instead. ([\#13432](https://github.com/matrix-org/synapse/issues/13432))
+
+
+Updates to the Docker image
+---------------------------
+
+- Make Docker images build on armv7 by installing cryptography dependencies in the 'requirements' stage. Contributed by Jasper Spaans. ([\#13372](https://github.com/matrix-org/synapse/issues/13372))
+
+
+Improved Documentation
+----------------------
+
+- Update the 'registration tokens' page to acknowledge that the relevant MSC was merged into version 1.2 of the Matrix specification. Contributed by @moan0s. ([\#11897](https://github.com/matrix-org/synapse/issues/11897))
+- Document which HTTP resources support gzip compression. ([\#13221](https://github.com/matrix-org/synapse/issues/13221))
+- Add steps describing how to elevate an existing user to administrator by manipulating the database. ([\#13230](https://github.com/matrix-org/synapse/issues/13230))
+- Fix wrong headline for `url_preview_accept_language` in documentation. ([\#13437](https://github.com/matrix-org/synapse/issues/13437))
+- Remove redundant 'Contents' section from the Configuration Manual. Contributed by @dklimpel. ([\#13438](https://github.com/matrix-org/synapse/issues/13438))
+- Update documentation for config setting `macaroon_secret_key`. ([\#13443](https://github.com/matrix-org/synapse/issues/13443))
+- Update outdated information on `sso_mapping_providers` documentation. ([\#13449](https://github.com/matrix-org/synapse/issues/13449))
+- Fix example code in module documentation of `password_auth_provider_callbacks`. ([\#13450](https://github.com/matrix-org/synapse/issues/13450))
+- Make the configuration for the cache clearer. ([\#13481](https://github.com/matrix-org/synapse/issues/13481))
+
+
+Internal Changes
+----------------
+
+- Extend the release script to automatically push a new SyTest branch, rather than having that be a manual process. ([\#12978](https://github.com/matrix-org/synapse/issues/12978))
+- Make minor clarifications to the error messages given when we fail to join a room via any server. ([\#13160](https://github.com/matrix-org/synapse/issues/13160))
+- Enable Complement CI tests in the 'latest deps' test run. ([\#13213](https://github.com/matrix-org/synapse/issues/13213))
+- Fix long-standing bugged logic which was never hit in `get_pdu` asking every remote destination even after it finds an event. ([\#13346](https://github.com/matrix-org/synapse/issues/13346))
+- Faster room joins: avoid blocking when pulling events with partially missing prev events. ([\#13355](https://github.com/matrix-org/synapse/issues/13355))
+- Instrument `/messages` for understandable traces in Jaeger. ([\#13368](https://github.com/matrix-org/synapse/issues/13368))
+- Remove an unused argument to `get_relations_for_event`. ([\#13383](https://github.com/matrix-org/synapse/issues/13383))
+- Add a `merge-back` command to the release script, which automates merging the correct branches after a release. ([\#13393](https://github.com/matrix-org/synapse/issues/13393))
+- Adding missing type hints to tests. ([\#13397](https://github.com/matrix-org/synapse/issues/13397))
+- Faster Room Joins: don't leave a stuck room partial state flag if the join fails. ([\#13403](https://github.com/matrix-org/synapse/issues/13403))
+- Refactor `_resolve_state_at_missing_prevs` to compute an `EventContext` instead. ([\#13404](https://github.com/matrix-org/synapse/issues/13404), [\#13431](https://github.com/matrix-org/synapse/issues/13431))
+- Faster Room Joins: prevent Synapse from answering federated join requests for a room which it has not fully joined yet. ([\#13416](https://github.com/matrix-org/synapse/issues/13416))
+- Re-enable running Complement tests against Synapse with workers. ([\#13420](https://github.com/matrix-org/synapse/issues/13420))
+- Prevent unnecessary lookups to any external `get_event` cache. Contributed by Nick @ Beeper (@fizzadar). ([\#13435](https://github.com/matrix-org/synapse/issues/13435))
+- Add some tracing to give more insight into local room joins. ([\#13439](https://github.com/matrix-org/synapse/issues/13439))
+- Rename class `RateLimitConfig` to `RatelimitSettings` and `FederationRateLimitConfig` to `FederationRatelimitSettings`. ([\#13442](https://github.com/matrix-org/synapse/issues/13442))
+- Add some comments about how event push actions are stored. ([\#13445](https://github.com/matrix-org/synapse/issues/13445), [\#13455](https://github.com/matrix-org/synapse/issues/13455))
+- Improve rebuild speed for the "synapse-workers" docker image. ([\#13447](https://github.com/matrix-org/synapse/issues/13447))
+- Fix `@tag_args` being off-by-one with the arguments when tagging a span (tracing). ([\#13452](https://github.com/matrix-org/synapse/issues/13452))
+- Update type of `EventContext.rejected`. ([\#13460](https://github.com/matrix-org/synapse/issues/13460))
+- Use literals in place of `HTTPStatus` constants in tests. ([\#13463](https://github.com/matrix-org/synapse/issues/13463), [\#13469](https://github.com/matrix-org/synapse/issues/13469))
+- Correct a misnamed argument in state res v2 internals. ([\#13467](https://github.com/matrix-org/synapse/issues/13467))
+
+
+Synapse 1.64.0 (2022-08-02)
+===========================
+
+No significant changes since 1.64.0rc2.
+
+
+Deprecation Warning
+-------------------
+
+Synapse v1.66.0 will remove the ability to delegate the tasks of verifying email address ownership, and password reset confirmation, to an identity server.
+
+If you require your homeserver to verify e-mail addresses or to support password resets via e-mail, please configure your homeserver with SMTP access so that it can send e-mails on its own behalf.
+[Consult the configuration documentation for more information.](https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html#email)
+
+
+Synapse 1.64.0rc2 (2022-07-29)
+==============================
+
+This RC reintroduces support for `account_threepid_delegates.email`, which was removed in 1.64.0rc1. It remains deprecated and will be removed altogether in Synapse v1.66.0. ([\#13406](https://github.com/matrix-org/synapse/issues/13406))
+
+
 Synapse 1.64.0rc1 (2022-07-26)
 ==============================
 
-As of this release, Synapse no longer allows the tasks of verifying email address ownership, and password reset confirmation, to be delegated to an identity server. For more information, see the [upgrade notes](https://matrix-org.github.io/synapse/v1.64/upgrade.html#upgrading-to-v1640).
+This RC removed the ability to delegate the tasks of verifying email address ownership, and password reset confirmation, to an identity server.
 
 We have also stopped building `.deb` packages for Ubuntu 21.10 as it is no longer an active version of Ubuntu.
 
@@ -190,6 +408,20 @@ No significant changes since 1.62.0rc3.
 
 Authors of spam-checker plugins should consult the [upgrade notes](https://github.com/matrix-org/synapse/blob/release-v1.62/docs/upgrade.md#upgrading-to-v1620) to learn about the enriched signatures for spam checker callbacks, which are supported with this release of Synapse.
 
+## Security advisory
+
+The following issue is fixed in 1.62.0.
+
+* [GHSA-jhjh-776m-4765](https://github.com/matrix-org/synapse/security/advisories/GHSA-jhjh-776m-4765) / [CVE-2022-31152](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-31152)
+
+  Synapse instances prior to 1.62.0 did not implement the Matrix [event authorization rules](https://spec.matrix.org/v1.3/rooms/v10/#authorization-rules) correctly. An attacker could craft events which would be accepted by Synapse but not a spec-conformant server, potentially causing divergence in the room state between servers.
+
+  Homeservers with federation disabled via the [`federation_domain_whitelist`](https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html#federation_domain_whitelist) config option are unaffected.
+
+  Administrators of homeservers with federation enabled are advised to upgrade to v1.62.0 or higher.
+
+  Fixed by [#13087](https://github.com/matrix-org/synapse/pull/13087) and [#13088](https://github.com/matrix-org/synapse/pull/13088).
+
 Synapse 1.62.0rc3 (2022-07-04)
 ==============================
 

README.rst

@@ -2,152 +2,70 @@
 Synapse |support| |development| |documentation| |license| |pypi| |python|
 =========================================================================
 
+Synapse is an open-source `Matrix <https://matrix.org/>`_ homeserver written and
+maintained by the Matrix.org Foundation. We began rapid development began in 2014,
+reaching v1.0.0 in 2019. Development on Synapse and the Matrix protocol itself continues
+in earnest today.
+
+Briefly, Matrix is an open standard for communications on the internet, supporting
+federation, encryption and VoIP. Matrix.org has more to say about the `goals of the
+Matrix project <https://matrix.org/docs/guides/introduction>`_, and the `formal specification
+<https://spec.matrix.org/>`_ describes the technical details.
+
 .. contents::
 
-Introduction
-============
+Installing and configuration
+============================
 
-Matrix is an ambitious new ecosystem for open federated Instant Messaging and
-VoIP.  The basics you need to know to get up and running are:
-
-- Everything in Matrix happens in a room.  Rooms are distributed and do not
-  exist on any single server.  Rooms can be located using convenience aliases
-  like ``#matrix:matrix.org`` or ``#test:localhost:8448``.
-
-- Matrix user IDs look like ``@matthew:matrix.org`` (although in the future
-  you will normally refer to yourself and others using a third party identifier
-  (3PID): email address, phone number, etc rather than manipulating Matrix user IDs)
-
-The overall architecture is::
-
-      client <----> homeserver <=====================> homeserver <----> client
-             https://somewhere.org/_matrix      https://elsewhere.net/_matrix
-
-``#matrix:matrix.org`` is the official support room for Matrix, and can be
-accessed by any client from https://matrix.org/docs/projects/try-matrix-now.html or
-via IRC bridge at irc://irc.libera.chat/matrix.
-
-Synapse is currently in rapid development, but as of version 0.5 we believe it
-is sufficiently stable to be run as an internet-facing service for real usage!
-
-About Matrix
-============
-
-Matrix specifies a set of pragmatic RESTful HTTP JSON APIs as an open standard,
-which handle:
-
-- Creating and managing fully distributed chat rooms with no
-  single points of control or failure
-- Eventually-consistent cryptographically secure synchronisation of room
-  state across a global open network of federated servers and services
-- Sending and receiving extensible messages in a room with (optional)
-  end-to-end encryption
-- Inviting, joining, leaving, kicking, banning room members
-- Managing user accounts (registration, login, logout)
-- Using 3rd Party IDs (3PIDs) such as email addresses, phone numbers,
-  Facebook accounts to authenticate, identify and discover users on Matrix.
-- Placing 1:1 VoIP and Video calls
-
-These APIs are intended to be implemented on a wide range of servers, services
-and clients, letting developers build messaging and VoIP functionality on top
-of the entirely open Matrix ecosystem rather than using closed or proprietary
-solutions. The hope is for Matrix to act as the building blocks for a new
-generation of fully open and interoperable messaging and VoIP apps for the
-internet.
-
-Synapse is a Matrix "homeserver" implementation developed by the matrix.org core
-team, written in Python 3/Twisted.
-
-In Matrix, every user runs one or more Matrix clients, which connect through to
-a Matrix homeserver. The homeserver stores all their personal chat history and
-user account information - much as a mail client connects through to an
-IMAP/SMTP server. Just like email, you can either run your own Matrix
-homeserver and control and own your own communications and history or use one
-hosted by someone else (e.g. matrix.org) - there is no single point of control
-or mandatory service provider in Matrix, unlike WhatsApp, Facebook, Hangouts,
-etc.
-
-We'd like to invite you to join #matrix:matrix.org (via
-https://matrix.org/docs/projects/try-matrix-now.html), run a homeserver, take a look
-at the `Matrix spec <https://matrix.org/docs/spec>`_, and experiment with the
-`APIs <https://matrix.org/docs/api>`_ and `Client SDKs
-<https://matrix.org/docs/projects/try-matrix-now.html#client-sdks>`_.
-
-Thanks for using Matrix!
-
-Support
-=======
-
-For support installing or managing Synapse, please join |room|_ (from a matrix.org
-account if necessary) and ask questions there. We do not use GitHub issues for
-support requests, only for bug reports and feature requests.
-
-Synapse's documentation is `nicely rendered on GitHub Pages <https://matrix-org.github.io/synapse>`_,
-with its source available in |docs|_.
-
-.. |room| replace:: ``#synapse:matrix.org``
-.. _room: https://matrix.to/#/#synapse:matrix.org
-
-.. |docs| replace:: ``docs``
-.. _docs: docs
-
-Synapse Installation
-====================
+The Synapse documentation describes `how to install Synapse <https://matrix-org.github.io/synapse/latest/setup/installation.html>`_. We recommend using
+`Docker images <https://matrix-org.github.io/synapse/latest/setup/installation.html#docker-images-and-ansible-playbooks>`_ or `Debian packages from Matrix.org
+<https://matrix-org.github.io/synapse/latest/setup/installation.html#matrixorg-packages>`_.
 
 .. _federation:
 
-* For details on how to install synapse, see
-  `Installation Instructions <https://matrix-org.github.io/synapse/latest/setup/installation.html>`_.
-* For specific details on how to configure Synapse for federation see `docs/federate.md <docs/federate.md>`_
+Synapse has a variety of `config options
+<https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html>`_
+which can be used to customise its behaviour after installation.
+There are additional details on how to `configure Synapse for federation here
+<https://matrix-org.github.io/synapse/latest/federate.html>`_.
+
+.. _reverse-proxy:
+
+Using a reverse proxy with Synapse
+----------------------------------
+
+It is recommended to put a reverse proxy such as
+`nginx <https://nginx.org/en/docs/http/ngx_http_proxy_module.html>`_,
+`Apache <https://httpd.apache.org/docs/current/mod/mod_proxy_http.html>`_,
+`Caddy <https://caddyserver.com/docs/quick-starts/reverse-proxy>`_,
+`HAProxy <https://www.haproxy.org/>`_ or
+`relayd <https://man.openbsd.org/relayd.8>`_ in front of Synapse. One advantage of
+doing so is that it means that you can expose the default https port (443) to
+Matrix clients without needing to run Synapse with root privileges.
+For information on configuring one, see `the reverse proxy docs
+<https://matrix-org.github.io/synapse/latest/reverse_proxy.html>`_.
+
+Upgrading an existing Synapse
+-----------------------------
+
+The instructions for upgrading Synapse are in `the upgrade notes`_.
+Please check these instructions as upgrading may require extra steps for some
+versions of Synapse.
+
+.. _the upgrade notes: https://matrix-org.github.io/synapse/develop/upgrade.html
 
 
-Connecting to Synapse from a client
-===================================
+Platform dependencies
+---------------------
 
-The easiest way to try out your new Synapse installation is by connecting to it
-from a web client.
+Synapse uses a number of platform dependencies such as Python and PostgreSQL,
+and aims to follow supported upstream versions. See the
+`deprecation policy <https://matrix-org.github.io/synapse/latest/deprecation_policy.html>`_
+for more details.
 
-Unless you are running a test instance of Synapse on your local machine, in
-general, you will need to enable TLS support before you can successfully
-connect from a client: see
-`TLS certificates <https://matrix-org.github.io/synapse/latest/setup/installation.html#tls-certificates>`_.
-
-An easy way to get started is to login or register via Element at
-https://app.element.io/#/login or https://app.element.io/#/register respectively.
-You will need to change the server you are logging into from ``matrix.org``
-and instead specify a Homeserver URL of ``https://<server_name>:8448``
-(or just ``https://<server_name>`` if you are using a reverse proxy).
-If you prefer to use another client, refer to our
-`client breakdown <https://matrix.org/docs/projects/clients-matrix>`_.
-
-If all goes well you should at least be able to log in, create a room, and
-start sending messages.
-
-.. _`client-user-reg`:
-
-Registering a new user from a client
-------------------------------------
-
-By default, registration of new users via Matrix clients is disabled. To enable
-it, specify ``enable_registration: true`` in ``homeserver.yaml``. (It is then
-recommended to also set up CAPTCHA - see `<docs/CAPTCHA_SETUP.md>`_.)
-
-Once ``enable_registration`` is set to ``true``, it is possible to register a
-user via a Matrix client.
-
-Your new user name will be formed partly from the ``server_name``, and partly
-from a localpart you specify when you create the account. Your name will take
-the form of::
-
-    @localpart:my.domain.name
-
-(pronounced "at localpart on my dot domain dot name").
-
-As when logging in, you will need to specify a "Custom server".  Specify your
-desired ``localpart`` in the 'User name' box.
 
 Security note
-=============
+-------------
 
 Matrix serves raw, user-supplied data in some APIs -- specifically the `content
 repository endpoints`_.
@@ -187,30 +105,76 @@ Following this advice ensures that even if an XSS is found in Synapse, the
 impact to other applications will be minimal.
 
 
-Upgrading an existing Synapse
-=============================
+Testing a new installation
+==========================
 
-The instructions for upgrading synapse are in `the upgrade notes`_.
-Please check these instructions as upgrading may require extra steps for some
-versions of synapse.
+The easiest way to try out your new Synapse installation is by connecting to it
+from a web client.
 
-.. _the upgrade notes: https://matrix-org.github.io/synapse/develop/upgrade.html
+Unless you are running a test instance of Synapse on your local machine, in
+general, you will need to enable TLS support before you can successfully
+connect from a client: see
+`TLS certificates <https://matrix-org.github.io/synapse/latest/setup/installation.html#tls-certificates>`_.
 
-.. _reverse-proxy:
+An easy way to get started is to login or register via Element at
+https://app.element.io/#/login or https://app.element.io/#/register respectively.
+You will need to change the server you are logging into from ``matrix.org``
+and instead specify a Homeserver URL of ``https://<server_name>:8448``
+(or just ``https://<server_name>`` if you are using a reverse proxy).
+If you prefer to use another client, refer to our
+`client breakdown <https://matrix.org/docs/projects/clients-matrix>`_.
 
-Using a reverse proxy with Synapse
-==================================
+If all goes well you should at least be able to log in, create a room, and
+start sending messages.
 
-It is recommended to put a reverse proxy such as
-`nginx <https://nginx.org/en/docs/http/ngx_http_proxy_module.html>`_,
-`Apache <https://httpd.apache.org/docs/current/mod/mod_proxy_http.html>`_,
-`Caddy <https://caddyserver.com/docs/quick-starts/reverse-proxy>`_,
-`HAProxy <https://www.haproxy.org/>`_ or
-`relayd <https://man.openbsd.org/relayd.8>`_ in front of Synapse. One advantage of
-doing so is that it means that you can expose the default https port (443) to
-Matrix clients without needing to run Synapse with root privileges.
+.. _`client-user-reg`:
 
-For information on configuring one, see `<docs/reverse_proxy.md>`_.
+Registering a new user from a client
+------------------------------------
+
+By default, registration of new users via Matrix clients is disabled. To enable
+it:
+
+1. In the
+   `registration config section <https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html#registration>`_
+   set ``enable_registration: true`` in ``homeserver.yaml``.
+2. Then **either**:
+
+   a. set up a `CAPTCHA <https://matrix-org.github.io/synapse/latest/CAPTCHA_SETUP.html>`_, or
+   b. set ``enable_registration_without_verification: true`` in ``homeserver.yaml``.
+
+We **strongly** recommend using a CAPTCHA, particularly if your homeserver is exposed to
+the public internet. Without it, anyone can freely register accounts on your homeserver.
+This can be exploited by attackers to create spambots targetting the rest of the Matrix
+federation.
+
+Your new user name will be formed partly from the ``server_name``, and partly
+from a localpart you specify when you create the account. Your name will take
+the form of::
+
+    @localpart:my.domain.name
+
+(pronounced "at localpart on my dot domain dot name").
+
+As when logging in, you will need to specify a "Custom server".  Specify your
+desired ``localpart`` in the 'User name' box.
+
+Troubleshooting and support
+===========================
+
+The `Admin FAQ <https://matrix-org.github.io/synapse/latest/usage/administration/admin_faq.html>`_
+includes tips on dealing with some common problems. For more details, see
+`Synapse's wider documentation <https://matrix-org.github.io/synapse/latest/>`_.
+
+For additional support installing or managing Synapse, please ask in the community
+support room |room|_ (from a matrix.org account if necessary). We do not use GitHub
+issues for support requests, only for bug reports and feature requests.
+
+.. |room| replace:: ``#synapse:matrix.org``
+.. _room: https://matrix.to/#/#synapse:matrix.org
+
+.. |docs| replace:: ``docs``
+.. _docs: docs
 
 Identity Servers
 ================
@@ -242,34 +206,15 @@ an email address with your account, or send an invite to another user via their
 email address.
 
 
-Password reset
-==============
-
-Users can reset their password through their client. Alternatively, a server admin
-can reset a users password using the `admin API <docs/admin_api/user_admin_api.md#reset-password>`_
-or by directly editing the database as shown below.
-
-First calculate the hash of the new password::
-
-    $ ~/synapse/env/bin/hash_password
-    Password:
-    Confirm password:
-    $2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-
-Then update the ``users`` table in the database::
-
-    UPDATE users SET password_hash='$2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'
-        WHERE name='@test:test.com';
-
-
-Synapse Development
-===================
+Development
+===========
 
+We welcome contributions to Synapse from the community!
 The best place to get started is our
 `guide for contributors <https://matrix-org.github.io/synapse/latest/development/contributing_guide.html>`_.
 This is part of our larger `documentation <https://matrix-org.github.io/synapse/latest>`_, which includes
-information for synapse developers as well as synapse administrators.
 
+information for Synapse developers as well as Synapse administrators.
 Developers might be particularly interested in:
 
 * `Synapse's database schema <https://matrix-org.github.io/synapse/latest/development/database_schema.html>`_,
@@ -280,187 +225,6 @@ Alongside all that, join our developer community on Matrix:
 `#synapse-dev:matrix.org <https://matrix.to/#/#synapse-dev:matrix.org>`_, featuring real humans!
 
 
-Quick start
------------
-
-Before setting up a development environment for synapse, make sure you have the
-system dependencies (such as the python header files) installed - see
-`Platform-specific prerequisites <https://matrix-org.github.io/synapse/latest/setup/installation.html#platform-specific-prerequisites>`_.
-
-To check out a synapse for development, clone the git repo into a working
-directory of your choice::
-
-    git clone https://github.com/matrix-org/synapse.git
-    cd synapse
-
-Synapse has a number of external dependencies. We maintain a fixed development
-environment using `Poetry <https://python-poetry.org/>`_. First, install poetry. We recommend::
-
-    pip install --user pipx
-    pipx install poetry
-
-as described `here <https://python-poetry.org/docs/#installing-with-pipx>`_.
-(See `poetry's installation docs <https://python-poetry.org/docs/#installation>`_
-for other installation methods.) Then ask poetry to create a virtual environment
-from the project and install Synapse's dependencies::
-
-    poetry install --extras "all test"
-
-This will run a process of downloading and installing all the needed
-dependencies into a virtual env.
-
-We recommend using the demo which starts 3 federated instances running on ports `8080` - `8082`::
-
-    poetry run ./demo/start.sh
-
-(to stop, you can use ``poetry run ./demo/stop.sh``)
-
-See the `demo documentation <https://matrix-org.github.io/synapse/develop/development/demo.html>`_
-for more information.
-
-If you just want to start a single instance of the app and run it directly::
-
-    # Create the homeserver.yaml config once
-    poetry run synapse_homeserver \
-      --server-name my.domain.name \
-      --config-path homeserver.yaml \
-      --generate-config \
-      --report-stats=[yes|no]
-
-    # Start the app
-    poetry run synapse_homeserver --config-path homeserver.yaml
-
-
-Running the unit tests
-----------------------
-
-After getting up and running, you may wish to run Synapse's unit tests to
-check that everything is installed correctly::
-
-    poetry run trial tests
-
-This should end with a 'PASSED' result (note that exact numbers will
-differ)::
-
-    Ran 1337 tests in 716.064s
-
-    PASSED (skips=15, successes=1322)
-
-For more tips on running the unit tests, like running a specific test or
-to see the logging output, see the `CONTRIBUTING doc <CONTRIBUTING.md#run-the-unit-tests>`_.
-
-
-Running the Integration Tests
------------------------------
-
-Synapse is accompanied by `SyTest <https://github.com/matrix-org/sytest>`_,
-a Matrix homeserver integration testing suite, which uses HTTP requests to
-access the API as a Matrix client would. It is able to run Synapse directly from
-the source tree, so installation of the server is not required.
-
-Testing with SyTest is recommended for verifying that changes related to the
-Client-Server API are functioning correctly. See the `SyTest installation
-instructions <https://github.com/matrix-org/sytest#installing>`_ for details.
-
-
-Platform dependencies
-=====================
-
-Synapse uses a number of platform dependencies such as Python and PostgreSQL,
-and aims to follow supported upstream versions. See the
-`<docs/deprecation_policy.md>`_ document for more details.
-
-
-Troubleshooting
-===============
-
-Need help? Join our community support room on Matrix:
-`#synapse:matrix.org <https://matrix.to/#/#synapse:matrix.org>`_
-
-Running out of File Handles
----------------------------
-
-If synapse runs out of file handles, it typically fails badly - live-locking
-at 100% CPU, and/or failing to accept new TCP connections (blocking the
-connecting client).  Matrix currently can legitimately use a lot of file handles,
-thanks to busy rooms like #matrix:matrix.org containing hundreds of participating
-servers.  The first time a server talks in a room it will try to connect
-simultaneously to all participating servers, which could exhaust the available
-file descriptors between DNS queries & HTTPS sockets, especially if DNS is slow
-to respond. (We need to improve the routing algorithm used to be better than
-full mesh, but as of March 2019 this hasn't happened yet).
-
-If you hit this failure mode, we recommend increasing the maximum number of
-open file handles to be at least 4096 (assuming a default of 1024 or 256).
-This is typically done by editing ``/etc/security/limits.conf``
-
-Separately, Synapse may leak file handles if inbound HTTP requests get stuck
-during processing - e.g. blocked behind a lock or talking to a remote server etc.
-This is best diagnosed by matching up the 'Received request' and 'Processed request'
-log lines and looking for any 'Processed request' lines which take more than
-a few seconds to execute. Please let us know at #synapse:matrix.org if
-you see this failure mode so we can help debug it, however.
-
-Help!! Synapse is slow and eats all my RAM/CPU!
------------------------------------------------
-
-First, ensure you are running the latest version of Synapse, using Python 3
-with a PostgreSQL database.
-
-Synapse's architecture is quite RAM hungry currently - we deliberately
-cache a lot of recent room data and metadata in RAM in order to speed up
-common requests. We'll improve this in the future, but for now the easiest
-way to either reduce the RAM usage (at the risk of slowing things down)
-is to set the almost-undocumented ``SYNAPSE_CACHE_FACTOR`` environment
-variable. The default is 0.5, which can be decreased to reduce RAM usage
-in memory constrained enviroments, or increased if performance starts to
-degrade.
-
-However, degraded performance due to a low cache factor, common on
-machines with slow disks, often leads to explosions in memory use due
-backlogged requests. In this case, reducing the cache factor will make
-things worse. Instead, try increasing it drastically. 2.0 is a good
-starting value.
-
-Using `libjemalloc <http://jemalloc.net/>`_ can also yield a significant
-improvement in overall memory use, and especially in terms of giving back
-RAM to the OS. To use it, the library must simply be put in the
-LD_PRELOAD environment variable when launching Synapse. On Debian, this
-can be done by installing the ``libjemalloc1`` package and adding this
-line to ``/etc/default/matrix-synapse``::
-
-    LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libjemalloc.so.1
-
-This can make a significant difference on Python 2.7 - it's unclear how
-much of an improvement it provides on Python 3.x.
-
-If you're encountering high CPU use by the Synapse process itself, you
-may be affected by a bug with presence tracking that leads to a
-massive excess of outgoing federation requests (see `discussion
-<https://github.com/matrix-org/synapse/issues/3971>`_). If metrics
-indicate that your server is also issuing far more outgoing federation
-requests than can be accounted for by your users' activity, this is a
-likely cause. The misbehavior can be worked around by setting
-the following in the Synapse config file:
-
-.. code-block:: yaml
-
-   presence:
-       enabled: false
-
-People can't accept room invitations from me
---------------------------------------------
-
-The typical failure mode here is that you send an invitation to someone
-to join a room or direct chat, but when they go to accept it, they get an
-error (typically along the lines of "Invalid signature"). They might see
-something like the following in their logs::
-
-    2019-09-11 19:32:04,271 - synapse.federation.transport.server - 288 - WARNING - GET-11752 - authenticate_request failed: 401: Invalid signature for server <server> with key ed25519:a_EqML: Unable to verify signature for <server>
-
-This is normally caused by a misconfiguration in your reverse-proxy. See
-`<docs/reverse_proxy.md>`_ and double-check that your settings are correct.
-
 .. |support| image:: https://img.shields.io/matrix/synapse:matrix.org?label=support&logo=matrix
   :alt: (get support on #synapse:matrix.org)
   :target: https://matrix.to/#/#synapse:matrix.org

changelog.d/12976.misc

@@ -0,0 +1 @@
+Wire up unit test coverage reporting to SonarCloud using Coverage.py.

changelog.d/13241.removal

@@ -0,0 +1 @@
+Drop support for calling `/_matrix/client/v3/rooms/{roomId}/invite` without an `id_access_token`, which was not permitted by the spec. Contributed by @Vetchu.

changelog.d/13509.bugfix

@@ -0,0 +1 @@
+Fix a bug introduced in Synapse 1.13 where the [List Rooms admin API](https://matrix-org.github.io/synapse/develop/admin_api/rooms.html#list-room-api) would return integers instead of booleans for the `federatable` and `public` fields when using a Sqlite database.

changelog.d/13540.misc

@@ -0,0 +1 @@
+Add experimental configuration option to allow disabling legacy Prometheus metric names.

changelog.d/13546.bugfix

@@ -0,0 +1 @@
+Fix bug that user cannot `/forget` rooms after the last member has left the room.

changelog.d/13569.removal

@@ -0,0 +1 @@
+Remove redundant `_get_joined_users_from_context` cache. Contributed by Nick @ Beeper (@fizzadar).

changelog.d/13573.misc

@@ -0,0 +1 @@
+Cache user IDs instead of profiles to reduce cache memory usage. Contributed by Nick @ Beeper (@fizzadar).

changelog.d/13575.misc

@@ -0,0 +1 @@
+Optimize how Synapse calculates domains to fetch from during backfill.

changelog.d/13583.bugfix

@@ -0,0 +1 @@
+Faster Room Joins: fix `/make_knock` blocking indefinitely when the room in question is a partial-stated room.

changelog.d/13585.bugfix

@@ -0,0 +1 @@
+Fix loading the current stream position behind the actual position.

changelog.d/13586.misc

@@ -0,0 +1 @@
+Comment about a better future where we can get the state diff between two events.

changelog.d/13588.misc

@@ -0,0 +1 @@
+Instrument `_check_sigs_and_hash_and_fetch` to trace time spent in child concurrent calls for understandable traces in Jaeger.

changelog.d/13591.misc

@@ -0,0 +1 @@
+Improve performance of `@cachedList`.

changelog.d/13592.misc

@@ -0,0 +1 @@
+Minor speed up of fetching large numbers of push rules.

changelog.d/13597.misc

@@ -0,0 +1 @@
+ Optimise push action fetching queries. Contributed by Nick @ Beeper (@fizzadar).

changelog.d/13600.misc

@@ -0,0 +1 @@
+Cache user IDs instead of profiles to reduce cache memory usage. Contributed by Nick @ Beeper (@fizzadar).

changelog.d/13602.doc

@@ -0,0 +1 @@
+Improve the description of the ["chain cover index"](https://matrix-org.github.io/synapse/latest/auth_chain_difference_algorithm.html) used internally by Synapse.

changelog.d/13603.misc

@@ -0,0 +1 @@
+Rename `event_map` to `unpersisted_events` when computing the auth differences.

changelog.d/13605.misc

@@ -0,0 +1 @@
+Refactor `get_users_in_room(room_id)` mis-use with dedicated `get_current_hosts_in_room(room_id)` function.

changelog.d/13606.misc

@@ -0,0 +1 @@
+Use dedicated `get_local_users_in_room(room_id)` function to find local users when calculating `join_authorised_via_users_server` of a `/make_join` request.

changelog.d/13608.misc

@@ -0,0 +1 @@
+Refactor `get_users_in_room(room_id)` mis-use to lookup single local user with dedicated `check_local_user_in_room(...)` function.

changelog.d/13614.feature

@@ -0,0 +1 @@
+Support setting the registration shared secret in a file, via a new `registration_shared_secret_path` configuration option.

changelog.d/13615.feature

@@ -0,0 +1 @@
+Change the default startup behaviour so that any missing "additional" configuration files (signing key, etc) are generated automatically.

changelog.d/13616.bugfix

@@ -0,0 +1 @@
+Fix a longstanding bug in `register_new_matrix_user` which meant it was always necessary to explicitly give a server URL.

changelog.d/13617.doc

@@ -0,0 +1 @@
+Document how ["monthly active users"](https://matrix-org.github.io/synapse/latest/usage/administration/monthly_active_users.html) is calculated and used.

changelog.d/13627.misc

@@ -0,0 +1 @@
+Drop unused column `application_services_state.last_txn`.

changelog.d/13632.bugfix

@@ -0,0 +1 @@
+Fix the running of MSC1763 retention purge_jobs in deployments with background jobs running on a worker by forcing them back onto the main worker. Contributed by Brad @ Beeper.

changelog.d/13634.feature

@@ -0,0 +1 @@
+Improve performance of sending messages in rooms with thousands of local users.

changelog.d/13639.misc

@@ -0,0 +1 @@
+Improve readability of Complement CI logs by printing failure results last.

changelog.d/13640.doc

@@ -0,0 +1 @@
+Improve documentation around user registration.

changelog.d/13645.doc

@@ -0,0 +1 @@
+Remove documentation of legacy `frontend_proxy` worker app.

changelog.d/13653.removal

@@ -0,0 +1 @@
+Remove support for unstable [private read receipts](https://github.com/matrix-org/matrix-spec-proposals/pull/2285).

changelog.d/13656.doc

@@ -0,0 +1 @@
+Clarify documentation that HTTP replication traffic can be protected with a shared secret.

changelog.d/13657.bugfix

@@ -0,0 +1 @@
+Fix a long-standing bug that downloaded media for URL previews was not deleted while database background updates were running.

changelog.d/13658.bugfix

@@ -0,0 +1 @@
+Fix MSC3030 `/timestamp_to_event` endpoint to return the correct next event when the events have the same timestamp.

changelog.d/13660.bugfix

@@ -0,0 +1 @@
+Fix bug where we wedge media plugins if clients disconnect early. Introduced in v1.22.0.

changelog.d/13662.misc

@@ -0,0 +1 @@
+Generalise the `@cancellable` annotation so it can be used on functions other than just servlet methods.

changelog.d/13665.doc

@@ -0,0 +1 @@
+Remove unintentional colons from [config manual](https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html) headers.

changelog.d/13679.misc

@@ -0,0 +1 @@
+Add some logging to help track down #13444.

changelog.d/13683.bugfix

@@ -0,0 +1 @@
+Fix a long-standing bug which meant that keys for unwhitelisted servers were not returned by `/_matrix/key/v2/query`.

changelog.d/13688.docker

@@ -0,0 +1 @@
+Update docker image to use a stable version of poetry.

changelog.d/13689.misc

@@ -0,0 +1 @@
+Update poetry lock file for v1.2.0.

changelog.d/13692.removal

@@ -0,0 +1 @@
+Remove support for unstable [private read receipts](https://github.com/matrix-org/matrix-spec-proposals/pull/2285).

changelog.d/13693.misc

@@ -0,0 +1 @@
+Add cache to `is_partial_state_room`.

changelog.d/13694.bugfix

@@ -0,0 +1 @@
+Fix a bug introduced in Synapse v1.20.0 that would cause the unstable unread counts from [MSC2654](https://github.com/matrix-org/matrix-spec-proposals/pull/2654) to be calculated even if the feature is disabled.

changelog.d/13697.misc

@@ -0,0 +1 @@
+Update the Grafana dashboard that is included with Synapse in the `contrib` directory.

changelog.d/13698.misc

@@ -0,0 +1 @@
+Only run trial CI on all python versions on non-PRs.

debian/build_virtualenv

@@ -36,7 +36,7 @@ TEMP_VENV="$(mktemp -d)"
 python3 -m venv "$TEMP_VENV"
 source "$TEMP_VENV/bin/activate"
 pip install -U pip
-pip install poetry==1.2.0b1
+pip install poetry==1.2.0
 poetry export \
     --extras all \
     --extras test \

debian/changelog

@@ -1,3 +1,66 @@
+matrix-synapse-py3 (1.66.0ubuntu1) UNRELEASED; urgency=medium
+
+  * Use stable poetry 1.2.0 version, rather than a prerelease.
+
+ -- Erik Johnston <erik@matrix.org>  Thu, 01 Sep 2022 13:48:31 +0100
+
+matrix-synapse-py3 (1.66.0) stable; urgency=medium
+
+  * New Synapse release 1.66.0.
+
+ -- Synapse Packaging team <packages@matrix.org>  Wed, 31 Aug 2022 11:20:17 +0100
+
+matrix-synapse-py3 (1.66.0~rc2+nmu1) UNRELEASED; urgency=medium
+
+  * Update debhelper to compatibility level 12.
+  * Drop the preinst script stopping synapse.
+  * Allocate a group for the system user.
+  * Change dpkg-statoverride to --force-statoverride-add.
+
+ -- Jörg Behrmann <behrmann@physik.fu-berlin.de>  Tue, 23 Aug 2022 17:17:00 +0100
+
+matrix-synapse-py3 (1.66.0~rc2) stable; urgency=medium
+
+  * New Synapse release 1.66.0rc2.
+
+ -- Synapse Packaging team <packages@matrix.org>  Tue, 30 Aug 2022 12:25:19 +0100
+
+matrix-synapse-py3 (1.66.0~rc1) stable; urgency=medium
+
+  * New Synapse release 1.66.0rc1.
+
+ -- Synapse Packaging team <packages@matrix.org>  Tue, 23 Aug 2022 09:48:55 +0100
+
+matrix-synapse-py3 (1.65.0) stable; urgency=medium
+
+  * New Synapse release 1.65.0.
+
+ -- Synapse Packaging team <packages@matrix.org>  Tue, 16 Aug 2022 16:51:26 +0100
+
+matrix-synapse-py3 (1.65.0~rc2) stable; urgency=medium
+
+  * New Synapse release 1.65.0rc2.
+
+ -- Synapse Packaging team <packages@matrix.org>  Thu, 11 Aug 2022 11:38:18 +0100
+
+matrix-synapse-py3 (1.65.0~rc1) stable; urgency=medium
+
+  * New Synapse release 1.65.0rc1.
+
+ -- Synapse Packaging team <packages@matrix.org>  Tue, 09 Aug 2022 11:39:29 +0100
+
+matrix-synapse-py3 (1.64.0) stable; urgency=medium
+
+  * New Synapse release 1.64.0.
+
+ -- Synapse Packaging team <packages@matrix.org>  Tue, 02 Aug 2022 10:32:30 +0100
+
+matrix-synapse-py3 (1.64.0~rc2) stable; urgency=medium
+
+  * New Synapse release 1.64.0rc2.
+
+ -- Synapse Packaging team <packages@matrix.org>  Fri, 29 Jul 2022 12:22:53 +0100
+
 matrix-synapse-py3 (1.64.0~rc1) stable; urgency=medium
 
   * New Synapse release 1.64.0rc1.

debian/compat

@@ -1 +0,0 @@
-10

debian/control

@@ -4,7 +4,7 @@ Priority: extra
 Maintainer: Synapse Packaging team <packages@matrix.org>
 # keep this list in sync with the build dependencies in docker/Dockerfile-dhvirtualenv.
 Build-Depends:
- debhelper (>= 10),
+ debhelper-compat (= 12),
  dh-virtualenv (>= 1.1),
  libsystemd-dev,
  libpq-dev,

debian/matrix-synapse-py3.postinst

@@ -40,12 +40,12 @@ EOF
     /opt/venvs/matrix-synapse/lib/manage_debconf.pl update
 
     if ! getent passwd $USER >/dev/null; then
-      adduser --quiet --system --no-create-home --home /var/lib/matrix-synapse $USER
+      adduser --quiet --system --group --no-create-home --home /var/lib/matrix-synapse $USER
     fi
 
     for DIR in /var/lib/matrix-synapse /var/log/matrix-synapse /etc/matrix-synapse; do
       if ! dpkg-statoverride --list --quiet $DIR >/dev/null; then
-        dpkg-statoverride --force --quiet --update --add $USER nogroup 0755 $DIR
+        dpkg-statoverride --force-statoverride-add --quiet --update --add $USER "$(id -gn $USER)" 0755 $DIR
       fi
     done
 

debian/matrix-synapse-py3.preinst

@@ -1,31 +0,0 @@
-#!/bin/sh -e
-
-# Attempt to undo some of the braindamage caused by
-# https://github.com/matrix-org/package-synapse-debian/issues/18.
-#
-# Due to reasons [1], the old python2 matrix-synapse package will not stop the
-# service when the package is uninstalled. Our maintainer scripts will do the
-# right thing in terms of ensuring the service is enabled and unmasked, but
-# then do a `systemctl start matrix-synapse`, which of course does nothing -
-# leaving the old (py2) service running.
-#
-# There should normally be no reason for the service to be running during our
-# preinst, so we assume that if it *is* running, it's due to that situation,
-# and stop it.
-#
-# [1] dh_systemd_start doesn't do anything because it sees that there is an
-#     init.d script with the same name, so leaves it to dh_installinit.
-#
-#     dh_installinit doesn't do anything because somebody gave it a --no-start
-#     for unknown reasons.
-
-if [ -x /bin/systemctl ]; then
-    if /bin/systemctl --quiet is-active -- matrix-synapse; then
-        echo >&2 "stopping existing matrix-synapse service"
-        /bin/systemctl stop matrix-synapse || true
-    fi
-fi
-
-#DEBHELPER#
-
-exit 0

debian/matrix-synapse.default

@@ -1,2 +0,0 @@
-# Specify environment variables used when running Synapse
-# SYNAPSE_CACHE_FACTOR=0.5 (default)

debian/matrix-synapse.service

@@ -5,7 +5,6 @@ Description=Synapse Matrix homeserver
 Type=notify
 User=matrix-synapse
 WorkingDirectory=/var/lib/matrix-synapse
-EnvironmentFile=-/etc/default/matrix-synapse
 ExecStartPre=/opt/venvs/matrix-synapse/bin/python -m synapse.app.homeserver --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --generate-keys
 ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.homeserver --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/
 ExecReload=/bin/kill -HUP $MAINPID
@@ -13,5 +12,10 @@ Restart=always
 RestartSec=3
 SyslogIdentifier=matrix-synapse
 
+# The environment file is not shipped by default anymore and the below directive
+# is for backwards compatibility only. Please use your homeserver.yaml if
+# possible.
+EnvironmentFile=-/etc/default/matrix-synapse
+
 [Install]
 WantedBy=multi-user.target

debian/rules

@@ -6,15 +6,17 @@
 # assume we only have one package
 PACKAGE_NAME:=`dh_listpackages`
 
-override_dh_systemd_enable:
-	dh_systemd_enable --name=matrix-synapse
-
-override_dh_installinit:
-	dh_installinit --name=matrix-synapse
+override_dh_installsystemd:
+	dh_installsystemd --name=matrix-synapse
 
 # we don't really want to strip the symbols from our object files.
 override_dh_strip:
 
+# many libraries pulled from PyPI have allocatable sections after
+# non-allocatable ones on which dwz errors out. For those without the issue the
+# gains are only marginal
+override_dh_dwz:
+
 # dh_shlibdeps calls dpkg-shlibdeps, which finds all the binary files
 # (executables and shared libs) in the package, and looks for the shared
 # libraries that they depend on. It then adds a dependency on the package that

docker/Dockerfile

@@ -40,22 +40,14 @@ FROM docker.io/python:${PYTHON_VERSION}-slim as requirements
 RUN \
    --mount=type=cache,target=/var/cache/apt,sharing=locked \
    --mount=type=cache,target=/var/lib/apt,sharing=locked \
- apt-get update -qq && apt-get install -yqq git \
+    apt-get update -qq && apt-get install -yqq \
+      build-essential cargo git libffi-dev libssl-dev \
     && rm -rf /var/lib/apt/lists/*
 
 # We install poetry in its own build stage to avoid its dependencies conflicting with
 # synapse's dependencies.
-# We use a specific commit from poetry's master branch instead of our usual 1.1.14,
-# to incorporate fixes to some bugs in `poetry export`. This commit corresponds to
-#    https://github.com/python-poetry/poetry/pull/5156 and
-#    https://github.com/python-poetry/poetry/issues/5141 ;
-# without it, we generate a requirements.txt with incorrect environment markers,
-# which causes necessary packages to be omitted when we `pip install`.
-#
-# NB: In poetry 1.2 `poetry export` will be moved into a plugin; we'll need to also
-# pip install poetry-plugin-export (https://github.com/python-poetry/poetry-plugin-export).
 RUN --mount=type=cache,target=/root/.cache/pip \
-  pip install --user "poetry-core==1.1.0a7" "git+https://github.com/python-poetry/poetry.git@fb13b3a676f476177f7937ffa480ee5cff9a90a5"
+  pip install --user "poetry==1.2.0"
 
 WORKDIR /synapse
 
@@ -68,7 +60,18 @@ COPY pyproject.toml poetry.lock /synapse/
 # reason, such as when a git repository is used directly as a dependency.
 ARG TEST_ONLY_SKIP_DEP_HASH_VERIFICATION
 
-RUN /root/.local/bin/poetry export --extras all -o /synapse/requirements.txt ${TEST_ONLY_SKIP_DEP_HASH_VERIFICATION:+--without-hashes}
+# If specified, we won't use the Poetry lockfile.
+# Instead, we'll just install what a regular `pip install` would from PyPI.
+ARG TEST_ONLY_IGNORE_POETRY_LOCKFILE
+
+# Export the dependencies, but only if we're actually going to use the Poetry lockfile.
+# Otherwise, just create an empty requirements file so that the Dockerfile can
+# proceed.
+RUN if [ -z "$TEST_ONLY_IGNORE_POETRY_LOCKFILE" ]; then \
+    /root/.local/bin/poetry export --extras all -o /synapse/requirements.txt ${TEST_ONLY_SKIP_DEP_HASH_VERIFICATION:+--without-hashes}; \
+  else \
+    touch /synapse/requirements.txt; \
+  fi
 
 ###
 ### Stage 1: builder
@@ -108,8 +111,17 @@ COPY synapse /synapse/synapse/
 # ... and what we need to `pip install`.
 COPY pyproject.toml README.rst /synapse/
 
+# Repeat of earlier build argument declaration, as this is a new build stage.
+ARG TEST_ONLY_IGNORE_POETRY_LOCKFILE
+
 # Install the synapse package itself.
-RUN pip install --prefix="/install" --no-deps --no-warn-script-location /synapse
+# If we have populated requirements.txt, we don't install any dependencies
+# as we should already have those from the previous `pip install` step.
+RUN if [ -z "$TEST_ONLY_IGNORE_POETRY_LOCKFILE" ]; then \
+    pip install --prefix="/install" --no-deps --no-warn-script-location /synapse[all]; \
+  else \
+    pip install --prefix="/install" --no-warn-script-location /synapse[all]; \
+  fi
 
 ###
 ### Stage 2: runtime

docker/Dockerfile-workers

@@ -1,39 +1,62 @@
 # syntax=docker/dockerfile:1
-# Inherit from the official Synapse docker image
+
 ARG SYNAPSE_VERSION=latest
+
+# first of all, we create a base image with an nginx which we can copy into the
+# target image. For repeated rebuilds, this is much faster than apt installing
+# each time.
+
+FROM debian:bullseye-slim AS deps_base
+    RUN \
+       --mount=type=cache,target=/var/cache/apt,sharing=locked \
+       --mount=type=cache,target=/var/lib/apt,sharing=locked \
+      apt-get update -qq && \
+      DEBIAN_FRONTEND=noninteractive apt-get install -yqq --no-install-recommends \
+          redis-server nginx-light
+
+# Similarly, a base to copy the redis server from.
+#
+# The redis docker image has fewer dynamic libraries than the debian package,
+# which makes it much easier to copy (but we need to make sure we use an image
+# based on the same debian version as the synapse image, to make sure we get
+# the expected version of libc.
+FROM redis:6-bullseye AS redis_base
+
+# now build the final image, based on the the regular Synapse docker image
 FROM matrixdotorg/synapse:$SYNAPSE_VERSION
 
-# Install deps
-RUN \
-   --mount=type=cache,target=/var/cache/apt,sharing=locked \
-   --mount=type=cache,target=/var/lib/apt,sharing=locked \
-  apt-get update -qq && \
-  DEBIAN_FRONTEND=noninteractive apt-get install -yqq --no-install-recommends \
-     redis-server nginx-light
+    # Install supervisord with pip instead of apt, to avoid installing a second
+    # copy of python.
+    RUN --mount=type=cache,target=/root/.cache/pip \
+        pip install supervisor~=4.2
+    RUN mkdir -p /etc/supervisor/conf.d
 
-# Install supervisord with pip instead of apt, to avoid installing a second
-# copy of python.
-RUN --mount=type=cache,target=/root/.cache/pip \
-    pip install supervisor~=4.2
+    # Copy over redis and nginx
+    COPY --from=redis_base /usr/local/bin/redis-server /usr/local/bin
 
-# Disable the default nginx sites
-RUN rm /etc/nginx/sites-enabled/default
+    COPY --from=deps_base /usr/sbin/nginx /usr/sbin
+    COPY --from=deps_base /usr/share/nginx /usr/share/nginx
+    COPY --from=deps_base /usr/lib/nginx /usr/lib/nginx
+    COPY --from=deps_base /etc/nginx /etc/nginx
+    RUN rm /etc/nginx/sites-enabled/default
+    RUN mkdir /var/log/nginx /var/lib/nginx
+    RUN chown www-data /var/log/nginx /var/lib/nginx
 
-# Copy Synapse worker, nginx and supervisord configuration template files
-COPY ./docker/conf-workers/* /conf/
+    # Copy Synapse worker, nginx and supervisord configuration template files
+    COPY ./docker/conf-workers/* /conf/
 
-# Copy a script to prefix log lines with the supervisor program name
-COPY ./docker/prefix-log /usr/local/bin/
+    # Copy a script to prefix log lines with the supervisor program name
+    COPY ./docker/prefix-log /usr/local/bin/
 
-# Expose nginx listener port
-EXPOSE 8080/tcp
+    # Expose nginx listener port
+    EXPOSE 8080/tcp
 
-# A script to read environment variables and create the necessary
-# files to run the desired worker configuration. Will start supervisord.
-COPY ./docker/configure_workers_and_start.py /configure_workers_and_start.py
-ENTRYPOINT ["/configure_workers_and_start.py"]
+    # A script to read environment variables and create the necessary
+    # files to run the desired worker configuration. Will start supervisord.
+    COPY ./docker/configure_workers_and_start.py /configure_workers_and_start.py
+    ENTRYPOINT ["/configure_workers_and_start.py"]
 
-# Replace the healthcheck with one which checks *all* the workers. The script
-# is generated by configure_workers_and_start.py.
-HEALTHCHECK --start-period=5s --interval=15s --timeout=5s \
-    CMD /bin/sh /healthcheck.sh
+    # Replace the healthcheck with one which checks *all* the workers. The script
+    # is generated by configure_workers_and_start.py.
+    HEALTHCHECK --start-period=5s --interval=15s --timeout=5s \
+        CMD /bin/sh /healthcheck.sh

docker/README.md

@@ -191,7 +191,7 @@ If you need to build the image from a Synapse checkout, use the following `docke
  build` command from the repo's root:
 
 ```
-docker build -t matrixdotorg/synapse -f docker/Dockerfile .
+DOCKER_BUILDKIT=1 docker build -t matrixdotorg/synapse -f docker/Dockerfile .
 ```
 
 You can choose to build a different docker image by changing the value of the `-f` flag to

docker/conf-workers/supervisord.conf.j2

@@ -19,7 +19,7 @@ username=www-data
 autorestart=true
 
 [program:redis]
-command=/usr/local/bin/prefix-log /usr/bin/redis-server /etc/redis/redis.conf --daemonize no
+command=/usr/local/bin/prefix-log /usr/local/bin/redis-server
 priority=1
 stdout_logfile=/dev/stdout
 stdout_logfile_maxbytes=0

docs/SUMMARY.md

@@ -69,6 +69,7 @@
     - [Manhole](manhole.md)
     - [Monitoring](metrics-howto.md)
       - [Reporting Homeserver Usage Statistics](usage/administration/monitoring/reporting_homeserver_usage_statistics.md)
+    - [Monthly Active Users](usage/administration/monthly_active_users.md)
     - [Understanding Synapse Through Grafana Graphs](usage/administration/understanding_synapse_through_grafana_graphs.md)
     - [Useful SQL for Admins](usage/administration/useful_sql_for_admins.md)
     - [Database Maintenance Tools](usage/administration/database_maintenance_tools.md)

docs/admin_api/register_api.md

@@ -5,9 +5,9 @@ non-interactive way. This is generally used for bootstrapping a Synapse
 instance with administrator accounts.
 
 To authenticate yourself to the server, you will need both the shared secret
-(`registration_shared_secret` in the homeserver configuration), and a
-one-time nonce. If the registration shared secret is not configured, this API
-is not enabled.
+([`registration_shared_secret`](../configuration/config_documentation.md#registration_shared_secret)
+in the homeserver configuration), and a one-time nonce. If the registration
+shared secret is not configured, this API is not enabled.
 
 To fetch the nonce, you need to request one from the API:
 
@@ -46,7 +46,24 @@ As an example:
 The MAC is the hex digest output of the HMAC-SHA1 algorithm, with the key being
 the shared secret and the content being the nonce, user, password, either the
 string "admin" or "notadmin", and optionally the user_type
-each separated by NULs. For an example of generation in Python:
+each separated by NULs.
+
+Here is an easy way to generate the HMAC digest if you have Bash and OpenSSL:
+
+```bash
+# Update these values and then paste this code block into a bash terminal
+nonce='thisisanonce'
+username='pepper_roni'
+password='pizza'
+admin='admin'
+secret='shared_secret'
+
+printf '%s\0%s\0%s\0%s' "$nonce" "$username" "$password" "$admin" |
+  openssl sha1 -hmac "$secret" |
+  awk '{print $2}'
+```
+
+For an example of generation in Python:
 
 ```python
 import hmac, hashlib
@@ -70,4 +87,4 @@ def generate_mac(nonce, user, password, admin=False, user_type=None):
         mac.update(user_type.encode('utf8'))
 
     return mac.hexdigest()
-```
+```

docs/admin_api/rooms.md

@@ -302,6 +302,8 @@ The following fields are possible in the JSON response body:
 * `state_events` - Total number of state_events of a room. Complexity of the room.
 * `room_type` - The type of the room taken from the room's creation event; for example "m.space" if the room is a space.
   If the room does not define a type, the value will be `null`.
+* `forgotten` - Whether all local users have
+  [forgotten](https://spec.matrix.org/latest/client-server-api/#leaving-rooms) the room.
 
 The API is:
 
@@ -330,10 +332,13 @@ A response body like the following is returned:
   "guest_access": null,
   "history_visibility": "shared",
   "state_events": 93534,
-  "room_type": "m.space"
+  "room_type": "m.space",
+  "forgotten": false
 }
 ```
 
+_Changed in Synapse 1.66:_ Added the `forgotten` key to the response body.
+
 # Room Members API
 
 The Room Members admin API allows server admins to get a list of all members of a room.

docs/admin_api/user_admin_api.md

@@ -753,6 +753,7 @@ A response body like the following is returned:
       "device_id": "QBUAZIFURK",
       "display_name": "android",
       "last_seen_ip": "1.2.3.4",
+      "last_seen_user_agent": "Mozilla/5.0 (X11; Linux x86_64; rv:103.0) Gecko/20100101 Firefox/103.0",
       "last_seen_ts": 1474491775024,
       "user_id": "<user_id>"
     },
@@ -760,6 +761,7 @@ A response body like the following is returned:
       "device_id": "AUIECTSRND",
       "display_name": "ios",
       "last_seen_ip": "1.2.3.5",
+      "last_seen_user_agent": "Mozilla/5.0 (X11; Linux x86_64; rv:103.0) Gecko/20100101 Firefox/103.0",
       "last_seen_ts": 1474491775025,
       "user_id": "<user_id>"
     }
@@ -786,6 +788,8 @@ The following fields are returned in the JSON response body:
     Absent if no name has been set.
   - `last_seen_ip` - The IP address where this device was last seen.
     (May be a few minutes out of date, for efficiency reasons).
+  - `last_seen_user_agent` - The user agent of the device when it was last seen.
+    (May be a few minutes out of date, for efficiency reasons).
   - `last_seen_ts` - The timestamp (in milliseconds since the unix epoch) when this
     devices was last seen. (May be a few minutes out of date, for efficiency reasons).
   - `user_id` - Owner of  device.
@@ -837,6 +841,7 @@ A response body like the following is returned:
   "device_id": "<device_id>",
   "display_name": "android",
   "last_seen_ip": "1.2.3.4",
+  "last_seen_user_agent": "Mozilla/5.0 (X11; Linux x86_64; rv:103.0) Gecko/20100101 Firefox/103.0",
   "last_seen_ts": 1474491775024,
   "user_id": "<user_id>"
 }
@@ -858,6 +863,8 @@ The following fields are returned in the JSON response body:
   Absent if no name has been set.
 - `last_seen_ip` - The IP address where this device was last seen.
   (May be a few minutes out of date, for efficiency reasons).
+  - `last_seen_user_agent` - The user agent of the device when it was last seen.
+  (May be a few minutes out of date, for efficiency reasons).
 - `last_seen_ts` - The timestamp (in milliseconds since the unix epoch) when this
   devices was last seen. (May be a few minutes out of date, for efficiency reasons).
 - `user_id` - Owner of  device.

docs/auth_chain_difference_algorithm.md

@@ -34,13 +34,45 @@ the process of indexing it).
 ## Chain Cover Index
 
 Synapse computes auth chain differences by pre-computing a "chain cover" index
-for the auth chain in a room, allowing efficient reachability queries like "is
-event A in the auth chain of event B". This is done by assigning every event a
-*chain ID* and *sequence number* (e.g. `(5,3)`), and having a map of *links*
-between chains (e.g. `(5,3) -> (2,4)`) such that A is reachable by B (i.e. `A`
-is in the auth chain of `B`) if and only if either:
+for the auth chain in a room, allowing us to efficiently make reachability queries
+like "is event `A` in the auth chain of event `B`?". We could do this with an index
+that tracks all pairs `(A, B)` such that `A` is in the auth chain of `B`. However, this
+would be prohibitively large, scaling poorly as the room accumulates more state
+events.
 
-1. A and B have the same chain ID and `A`'s sequence number is less than `B`'s
+Instead, we break down the graph into *chains*. A chain is a subset of a DAG
+with the following property: for any pair of events `E` and `F` in the chain,
+the chain contains a path `E -> F` or a path `F -> E`. This forces a chain to be
+linear (without forks), e.g. `E -> F -> G -> ... -> H`. Each event in the chain
+is given a *sequence number* local to that chain. The oldest event `E` in the
+chain has sequence number 1. If `E` has a child `F` in the chain, then `F` has
+sequence number 2. If `E` has a grandchild `G` in the chain, then `G` has
+sequence number 3; and so on.
+
+Synapse ensures that each persisted event belongs to exactly one chain, and
+tracks how the chains are connected to one another. This allows us to
+efficiently answer reachability queries. Doing so uses less storage than
+tracking reachability on an event-by-event basis, particularly when we have
+fewer and longer chains. See
+
+> Jagadish, H. (1990). [A compression technique to materialize transitive closure](https://doi.org/10.1145/99935.99944).
+> *ACM Transactions on Database Systems (TODS)*, 15*(4)*, 558-598.
+
+for the original idea or
+
+> Y. Chen, Y. Chen, [An efficient algorithm for answering graph
+> reachability queries](https://doi.org/10.1109/ICDE.2008.4497498),
+> in: 2008 IEEE 24th International Conference on Data Engineering, April 2008,
+> pp. 893–902. (PDF available via [Google Scholar](https://scholar.google.com/scholar?q=Y.%20Chen,%20Y.%20Chen,%20An%20efficient%20algorithm%20for%20answering%20graph%20reachability%20queries,%20in:%202008%20IEEE%2024th%20International%20Conference%20on%20Data%20Engineering,%20April%202008,%20pp.%20893902.).)
+
+for a more modern take.
+
+In practical terms, the chain cover assigns every event a
+*chain ID* and *sequence number* (e.g. `(5,3)`), and maintains a map of *links*
+between events in chains (e.g. `(5,3) -> (2,4)`) such that `A` is reachable by `B`
+(i.e. `A` is in the auth chain of `B`) if and only if either:
+
+1. `A` and `B` have the same chain ID and `A`'s sequence number is less than `B`'s
    sequence number; or
 2. there is a link `L` between `B`'s chain ID and `A`'s chain ID such that
    `L.start_seq_no` <= `B.seq_no` and `A.seq_no` <= `L.end_seq_no`.
@@ -49,8 +81,9 @@ There are actually two potential implementations, one where we store links from
 each chain to every other reachable chain (the transitive closure of the links
 graph), and one where we remove redundant links (the transitive reduction of the
 links graph) e.g. if we have chains `C3 -> C2 -> C1` then the link `C3 -> C1`
-would not be stored. Synapse uses the former implementations so that it doesn't
-need to recurse to test reachability between chains.
+would not be stored. Synapse uses the former implementation so that it doesn't
+need to recurse to test reachability between chains. This trades-off extra storage
+in order to save CPU cycles and DB queries.
 
 ### Example
 

docs/development/contributing_guide.md

@@ -62,6 +62,8 @@ pipx install poetry
 but see poetry's [installation instructions](https://python-poetry.org/docs/#installation)
 for other installation methods.
 
+Synapse requires Poetry version 1.2.0 or later.
+
 Next, open a terminal and install dependencies as follows:
 
 ```sh

docs/development/dependencies.md

@@ -243,14 +243,11 @@ doesn't require poetry. (It's what we use in CI too). However, you could try
 
 ## Check the version of poetry with `poetry --version`.
 
-At the time of writing, the 1.2 series is beta only. We have seen some examples
-where the lockfiles generated by 1.2 prereleasese aren't interpreted correctly
-by poetry 1.1.x. For now, use poetry 1.1.14, which includes a critical
-[change](https://github.com/python-poetry/poetry/pull/5973) needed to remain
-[compatible with PyPI](https://github.com/pypi/warehouse/pull/11775).
+The minimum version of poetry supported by Synapse is 1.2.
 
 It can also be useful to check the version of `poetry-core` in use. If you've
-installed `poetry` with `pipx`, try `pipx runpip poetry list | grep poetry-core`.
+installed `poetry` with `pipx`, try `pipx runpip poetry list | grep
+poetry-core`.
 
 ## Clear caches: `poetry cache clear --all pypi`.
 

docs/message_retention_policies.md

@@ -8,7 +8,8 @@ and allow server and room admins to configure how long messages should
 be kept in a homeserver's database before being purged from it.
 **Please note that, as this feature isn't part of the Matrix
 specification yet, this implementation is to be considered as
-experimental.** 
+experimental. There are known bugs which may cause database corruption.
+Proceed with caution.** 
 
 A message retention policy is mainly defined by its `max_lifetime`
 parameter, which defines how long a message can be kept around after

docs/modules/password_auth_provider_callbacks.md

@@ -263,7 +263,7 @@ class MyAuthProvider:
             return None
 
         if self.credentials.get(username) == login_dict.get("my_field"):
-            return self.api.get_qualified_user_id(username)
+            return (self.api.get_qualified_user_id(username), None)
 
     async def check_pass(
         self,
@@ -280,5 +280,5 @@ class MyAuthProvider:
             return None
 
         if self.credentials.get(username) == login_dict.get("password"):
-            return self.api.get_qualified_user_id(username)
+            return (self.api.get_qualified_user_id(username), None)
 ```

docs/openid.md

@@ -174,7 +174,9 @@ oidc_providers:
 
 1. Create a regular web application for Synapse
 2. Set the Allowed Callback URLs to `[synapse public baseurl]/_synapse/client/oidc/callback`
-3. Add a rule to add the `preferred_username` claim.
+3. Add a rule with any name to add the `preferred_username` claim. 
+(See https://auth0.com/docs/customize/rules/create-rules for more information on how to create rules.)
+   
    <details>
     <summary>Code sample</summary>
 

docs/setup/installation.md

@@ -506,9 +506,13 @@ email will be disabled.
 
 ### Registering a user
 
-The easiest way to create a new user is to do so from a client like [Element](https://element.io/).
+One way to create a new user is to do so from a client like
+[Element](https://element.io/).  This requires registration to be enabled via
+the
+[`enable_registration`](../usage/configuration/config_documentation.md#enable_registration)
+setting.
 
-Alternatively, you can do so from the command line. This can be done as follows:
+Alternatively, you can create new users from the command line. This can be done as follows:
 
  1. If synapse was installed via pip, activate the virtualenv as follows (if Synapse was
     installed via a prebuilt package, `register_new_matrix_user` should already be
@@ -520,7 +524,7 @@ Alternatively, you can do so from the command line. This can be done as follows:
     ```
  2. Run the following command:
     ```sh
-    register_new_matrix_user -c homeserver.yaml http://localhost:8008
+    register_new_matrix_user -c homeserver.yaml
     ```
 
 This will prompt you to add details for the new user, and will then connect to
@@ -533,12 +537,13 @@ Make admin [no]:
 Success!
 ```
 
-This process uses a setting `registration_shared_secret` in
-`homeserver.yaml`, which is shared between Synapse itself and the
-`register_new_matrix_user` script. It doesn't matter what it is (a random
-value is generated by `--generate-config`), but it should be kept secret, as
-anyone with knowledge of it can register users, including admin accounts,
-on your server even if `enable_registration` is `false`.
+This process uses a setting
+[`registration_shared_secret`](../usage/configuration/config_documentation.md#registration_shared_secret),
+which is shared between Synapse itself and the `register_new_matrix_user`
+script. It doesn't matter what it is (a random value is generated by
+`--generate-config`), but it should be kept secret, as anyone with knowledge of
+it can register users, including admin accounts, on your server even if
+`enable_registration` is `false`.
 
 ### Setting up a TURN server
 

docs/sso_mapping_providers.md

@@ -22,7 +22,7 @@ choose their own username.
 In the first case - where users are automatically allocated a Matrix ID - it is
 the responsibility of the mapping provider to normalise the SSO attributes and
 map them to a valid Matrix ID. The [specification for Matrix
-IDs](https://matrix.org/docs/spec/appendices#user-identifiers) has some
+IDs](https://spec.matrix.org/latest/appendices/#user-identifiers) has some
 information about what is considered valid.
 
 If the mapping provider does not assign a Matrix ID, then Synapse will
@@ -37,9 +37,10 @@ as Synapse). The Synapse config is then modified to point to the mapping provide
 ## OpenID Mapping Providers
 
 The OpenID mapping provider can be customized by editing the
-`oidc_config.user_mapping_provider.module` config option.
+[`oidc_providers.user_mapping_provider.module`](usage/configuration/config_documentation.md#oidc_providers)
+config option.
 
-`oidc_config.user_mapping_provider.config` allows you to provide custom
+`oidc_providers.user_mapping_provider.config` allows you to provide custom
 configuration options to the module. Check with the module's documentation for
 what options it provides (if any). The options listed by default are for the
 user mapping provider built in to Synapse. If using a custom module, you should
@@ -58,7 +59,7 @@ A custom mapping provider must specify the following methods:
     - This method should have the `@staticmethod` decoration.
     - Arguments:
         - `config` - A `dict` representing the parsed content of the
-          `oidc_config.user_mapping_provider.config` homeserver config option.
+          `oidc_providers.user_mapping_provider.config` homeserver config option.
            Runs on homeserver startup. Providers should extract and validate
            any option values they need here.
     - Whatever is returned will be passed back to the user mapping provider module's
@@ -102,7 +103,7 @@ A custom mapping provider must specify the following methods:
       will be returned as part of the response during a successful login.
 
       Note that care should be taken to not overwrite any of the parameters
-      usually returned as part of the [login response](https://matrix.org/docs/spec/client_server/latest#post-matrix-client-r0-login).
+      usually returned as part of the [login response](https://spec.matrix.org/latest/client-server-api/#post_matrixclientv3login).
 
 ### Default OpenID Mapping Provider
 
@@ -113,7 +114,8 @@ specified in the config. It is located at
 ## SAML Mapping Providers
 
 The SAML mapping provider can be customized by editing the
-`saml2_config.user_mapping_provider.module` config option.
+[`saml2_config.user_mapping_provider.module`](docs/usage/configuration/config_documentation.md#saml2_config)
+config option.
 
 `saml2_config.user_mapping_provider.config` allows you to provide custom
 configuration options to the module. Check with the module's documentation for

docs/systemd-with-workers/workers/generic_worker.yaml

@@ -5,6 +5,8 @@ worker_name: generic_worker1
 worker_replication_host: 127.0.0.1
 worker_replication_http_port: 9093
 
+worker_main_http_uri: http://localhost:8008/
+
 worker_listeners:
   - type: http
     port: 8083

docs/templates.md

@@ -9,7 +9,7 @@ in, allowing them to specify custom templates:
 
 ```yaml
 templates:
-  custom_templates_directory: /path/to/custom/templates/
+  custom_template_directory: /path/to/custom/templates/
 ```
 
 If this setting is not set, or the files named below are not found within the directory,

docs/upgrade.md

@@ -89,21 +89,44 @@ process, for example:
     dpkg -i matrix-synapse-py3_1.3.0+stretch1_amd64.deb
     ```
 
-# Upgrading to v1.64.0
+# Upgrading to v1.67.0
+
+## Minimum version of Poetry is now v1.2.0
+
+The minimum supported version of poetry is now 1.2. This should only affect
+those installing from a source checkout.
+
+# Upgrading to v1.66.0
 
 ## Delegation of email validation no longer supported
 
 As of this version, Synapse no longer allows the tasks of verifying email address
 ownership, and password reset confirmation, to be delegated to an identity server.
+This removal was previously planned for Synapse 1.64.0, but was
+[delayed](https://github.com/matrix-org/synapse/issues/13421) until now to give
+homeserver administrators more notice of the change.
 
 To continue to allow users to add email addresses to their homeserver accounts,
-and perform password resets, make sure that Synapse is configured with a
-working email server in the `email` configuration section (including, at a
-minimum, a `notif_from` setting.)
+and perform password resets, make sure that Synapse is configured with a working
+email server in the [`email` configuration
+section](https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html#email)
+(including, at a minimum, a `notif_from` setting.)
 
 Specifying an `email` setting under `account_threepid_delegates` will now cause
 an error at startup.
 
+# Upgrading to v1.64.0
+
+## Deprecation of the ability to delegate e-mail verification to identity servers
+
+Synapse v1.66.0 will remove the ability to delegate the tasks of verifying email address ownership, and password reset confirmation, to an identity server.
+
+If you require your homeserver to verify e-mail addresses or to support password resets via e-mail, please configure your homeserver with SMTP access so that it can send e-mails on its own behalf.
+[Consult the configuration documentation for more information.](https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html#email)
+
+The option that will be removed is `account_threepid_delegates.email`.
+
+
 ## Changes to the event replication streams
 
 Synapse now includes a flag indicating if an event is an outlier when
@@ -1184,7 +1207,7 @@ updated.
 When setting up worker processes, we now recommend the use of a Redis
 server for replication. **The old direct TCP connection method is
 deprecated and will be removed in a future release.** See
-[workers](workers.md) for more details.
+the [worker documentation](https://matrix-org.github.io/synapse/v1.66/workers.html) for more details.
 
 # Upgrading to v1.14.0
 

docs/usage/administration/admin_api/README.md

@@ -5,8 +5,9 @@
 Many of the API calls in the admin api will require an `access_token` for a
 server admin. (Note that a server admin is distinct from a room admin.)
 
-A user can be marked as a server admin by updating the database directly, e.g.:
+An existing user can be marked as a server admin by updating the database directly.
 
+Check your [database settings](config_documentation.md#database) in the configuration file, connect to the correct database using either `psql [database name]` (if using PostgreSQL) or `sqlite3 path/to/your/database.db` (if using SQLite) and elevate the user `@foo:bar.com` to administrator.
 ```sql
 UPDATE users SET admin = 1 WHERE name = '@foo:bar.com';
 ```

docs/usage/administration/admin_api/registration_tokens.md

@@ -2,11 +2,11 @@
 
 This API allows you to manage tokens which can be used to authenticate
 registration requests, as proposed in
-[MSC3231](https://github.com/matrix-org/matrix-doc/blob/main/proposals/3231-token-authenticated-registration.md).
+[MSC3231](https://github.com/matrix-org/matrix-doc/blob/main/proposals/3231-token-authenticated-registration.md)
+and stabilised in version 1.2 of the Matrix specification.
 To use it, you will need to enable the `registration_requires_token` config
 option, and authenticate by providing an `access_token` for a server admin:
-see [Admin API](../../usage/administration/admin_api).
-Note that this API is still experimental; not all clients may support it yet.
+see [Admin API](../admin_api).
 
 
 ## Registration token objects

docs/usage/administration/admin_faq.md

@@ -2,9 +2,9 @@
 
 How do I become a server admin?
 ---
-If your server already has an admin account you should use the user admin API to promote other accounts to become admins. See [User Admin API](../../admin_api/user_admin_api.md#Change-whether-a-user-is-a-server-administrator-or-not)
+If your server already has an admin account you should use the [User Admin API](../../admin_api/user_admin_api.md#Change-whether-a-user-is-a-server-administrator-or-not) to promote other accounts to become admins.
 
-If you don't have any admin accounts yet you won't be able to use the admin API so you'll have to edit the database manually. Manually editing the database is generally not recommended so once you have an admin account, use the admin APIs to make further changes.
+If you don't have any admin accounts yet you won't be able to use the admin API, so you'll have to edit the database manually. Manually editing the database is generally not recommended so once you have an admin account: use the admin APIs to make further changes.
 
 ```sql
 UPDATE users SET admin = 1 WHERE name = '@foo:bar.com';
@@ -32,9 +32,11 @@ What users are registered on my server?
 SELECT NAME from users;
 ```
 
-Manually resetting passwords:
+Manually resetting passwords
 ---
-See https://github.com/matrix-org/synapse/blob/master/README.rst#password-reset
+Users can reset their password through their client. Alternatively, a server admin
+can reset a user's password using the [admin API](../../admin_api/user_admin_api.md#reset-password).
+
 
 I have a problem with my server. Can I just delete my database and start again?
 ---
@@ -101,3 +103,83 @@ LIMIT 10;
 
 You can also use the [List Room API](../../admin_api/rooms.md#list-room-api)
 and `order_by` `state_events`.
+
+
+People can't accept room invitations from me
+---
+
+The typical failure mode here is that you send an invitation to someone
+to join a room or direct chat, but when they go to accept it, they get an
+error (typically along the lines of "Invalid signature"). They might see
+something like the following in their logs:
+
+    2019-09-11 19:32:04,271 - synapse.federation.transport.server - 288 - WARNING - GET-11752 - authenticate_request failed: 401: Invalid signature for server <server> with key ed25519:a_EqML: Unable to verify signature for <server>
+
+This is normally caused by a misconfiguration in your reverse-proxy. See [the reverse proxy docs](docs/reverse_proxy.md) and double-check that your settings are correct.
+
+
+Help!! Synapse is slow and eats all my RAM/CPU!
+-----------------------------------------------
+
+First, ensure you are running the latest version of Synapse, using Python 3
+with a [PostgreSQL database](../../postgres.md).
+
+Synapse's architecture is quite RAM hungry currently - we deliberately
+cache a lot of recent room data and metadata in RAM in order to speed up
+common requests. We'll improve this in the future, but for now the easiest
+way to either reduce the RAM usage (at the risk of slowing things down)
+is to set the almost-undocumented ``SYNAPSE_CACHE_FACTOR`` environment
+variable. The default is 0.5, which can be decreased to reduce RAM usage
+in memory constrained environments, or increased if performance starts to
+degrade.
+
+However, degraded performance due to a low cache factor, common on
+machines with slow disks, often leads to explosions in memory use due
+backlogged requests. In this case, reducing the cache factor will make
+things worse. Instead, try increasing it drastically. 2.0 is a good
+starting value.
+
+Using [libjemalloc](https://jemalloc.net) can also yield a significant
+improvement in overall memory use, and especially in terms of giving back
+RAM to the OS. To use it, the library must simply be put in the
+LD_PRELOAD environment variable when launching Synapse. On Debian, this
+can be done by installing the `libjemalloc1` package and adding this
+line to `/etc/default/matrix-synapse`:
+
+    LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libjemalloc.so.1
+
+This made a significant difference on Python 2.7 - it's unclear how
+much of an improvement it provides on Python 3.x.
+
+If you're encountering high CPU use by the Synapse process itself, you
+may be affected by a bug with presence tracking that leads to a
+massive excess of outgoing federation requests (see [discussion](https://github.com/matrix-org/synapse/issues/3971)). If metrics
+indicate that your server is also issuing far more outgoing federation
+requests than can be accounted for by your users' activity, this is a
+likely cause. The misbehavior can be worked around by disabling presence
+in the Synapse config file: [see here](../configuration/config_documentation.md#presence).
+
+
+Running out of File Handles
+---------------------------
+
+If Synapse runs out of file handles, it typically fails badly - live-locking
+at 100% CPU, and/or failing to accept new TCP connections (blocking the
+connecting client).  Matrix currently can legitimately use a lot of file handles,
+thanks to busy rooms like `#matrix:matrix.org` containing hundreds of participating
+servers.  The first time a server talks in a room it will try to connect
+simultaneously to all participating servers, which could exhaust the available
+file descriptors between DNS queries & HTTPS sockets, especially if DNS is slow
+to respond. (We need to improve the routing algorithm used to be better than
+full mesh, but as of March 2019 this hasn't happened yet).
+
+If you hit this failure mode, we recommend increasing the maximum number of
+open file handles to be at least 4096 (assuming a default of 1024 or 256).
+This is typically done by editing ``/etc/security/limits.conf``
+
+Separately, Synapse may leak file handles if inbound HTTP requests get stuck
+during processing - e.g. blocked behind a lock or talking to a remote server etc.
+This is best diagnosed by matching up the 'Received request' and 'Processed request'
+log lines and looking for any 'Processed request' lines which take more than
+a few seconds to execute. Please let us know at [`#synapse:matrix.org`](https://matrix.to/#/#synapse-dev:matrix.org) if
+you see this failure mode so we can help debug it, however.

docs/usage/administration/monthly_active_users.md

@@ -0,0 +1,84 @@
+# Monthly Active Users
+
+Synapse can be configured to record the number of monthly active users (also referred to as MAU) on a given homeserver.
+For clarity's sake, MAU only tracks local users.
+
+Please note that the metrics recorded by the [Homeserver Usage Stats](../../usage/administration/monitoring/reporting_homeserver_usage_statistics.md)
+are calculated differently. The `monthly_active_users` from the usage stats does not take into account any
+of the rules below, and counts any users who have made a request to the homeserver in the last 30 days.
+
+See the [configuration manual](../../usage/configuration/config_documentation.md#limit_usage_by_mau) for details on how to configure MAU.
+
+## Calculating active users
+
+Individual user activity is measured in active days. If a user performs an action, the exact time of that action is then recorded. When
+calculating the MAU figure, any users with a recorded action in the last 30 days are considered part of the cohort. Days are measured
+as a rolling window from the current system time to 30 days ago.
+
+So for example, if Synapse were to calculate the active users on the 15th July at 13:25, it would include any activity from 15th June 13:25 onwards.
+
+A user is **never** considered active if they are either:
+ - Part of the trial day cohort (described below)
+ - Owned by an application service.
+   - Note: This **only** covers users that are part of an application service `namespaces.users` registration. The namespace
+     must also be marked as `exclusive`.
+
+Otherwise, any request to Synapse will mark the user as active. Please note that registration will not mark a user as active *unless* 
+they register with a 3pid that is included in the config field `mau_limits_reserved_threepids`.
+
+The Prometheus metric for MAU is refreshed every 5 minutes.
+
+Once an hour, Synapse checks to see if any users are inactive (with only activity timestamps later than 30 days). These users
+are removed from the active users cohort. If they then become active, they are immediately restored to the cohort.
+
+It is important to note that **deactivated** users are not immediately removed from the pool of active users, but as these users won't
+perform actions they will eventually be removed from the cohort.
+
+### Trial days
+
+If the config option `mau_trial_days` is set, a user must have been active this many days **after** registration to be active. A user is in the
+trial period if their registration timestamp (also known as the `creation_ts`) is less than `mau_trial_days` old.
+
+As an example, if `mau_trial_days` is set to `3` and a user is active **after** 3 days (72 hours from registration time) then they will be counted as active.
+
+The `mau_appservice_trial_days` config further extends this rule by applying different durations depending on the `appservice_id` of the user.
+Users registered by an application service will be recorded with an `appservice_id` matching the `id` key in the registration file for that service.
+
+
+## Limiting usage of the homeserver when the maximum MAU is reached
+
+If both config options `limit_usage_by_mau` and `max_mau_value` is set, and the current MAU value exceeds the maximum value, the 
+homeserver will begin to block some actions.
+
+Individual users matching **any** of the below criteria never have their actions blocked:
+  - Considered part of the cohort of MAU users.
+  - Considered part of the trial period.
+  - Registered as a `support` user.
+  - Application service users if `track_appservice_user_ips` is NOT set.
+
+Please not that server admins are **not** exempt from blocking.
+
+The following actions are blocked when the MAU limit is exceeded:
+  - Logging in
+  - Sending events
+  - Creating rooms
+  - Syncing
+
+Registration is also blocked for all new signups *unless* the user is registering with a threepid included in the `mau_limits_reserved_threepids`
+config value.
+
+When a request is blocked, the response will have the `errcode` `M_RESOURCE_LIMIT_EXCEEDED`.
+
+## Metrics
+
+Synapse records several different prometheus metrics for MAU.
+
+`synapse_admin_mau:current` records the current MAU figure for native (non-application-service) users.
+
+`synapse_admin_mau:max` records the maximum MAU as dictated by the `max_mau_value` config value.
+
+`synapse_admin_mau_current_mau_by_service` records the current MAU including application service users. The label `app_service` can be used
+to filter by a specific service ID. This *also* includes non-application-service users under `app_service=native` .
+
+`synapse_admin_mau:registered_reserved_users` records the number of users specified in `mau_limits_reserved_threepids` which have
+registered accounts on the homeserver.

docs/workers.md

@@ -117,23 +117,26 @@ redis:
     enabled: true
 ```
 
-See the sample config for the full documentation of each option.
+See the [configuration manual](usage/configuration/config_documentation.html) for the full documentation of each option.
 
 Under **no circumstances** should the replication listener be exposed to the
-public internet; it has no authentication and is unencrypted.
+public internet; replication traffic is:
+
+* always unencrypted
+* unauthenticated, unless `worker_replication_secret` is configured
 
 
 ### Worker configuration
 
-In the config file for each worker, you must specify the type of worker
-application (`worker_app`), and you should specify a unique name for the worker
-(`worker_name`). The currently available worker applications are listed below.
-You must also specify the HTTP replication endpoint that it should talk to on
-the main synapse process.  `worker_replication_host` should specify the host of
-the main synapse and `worker_replication_http_port` should point to the HTTP
-replication port. If the worker will handle HTTP requests then the
-`worker_listeners` option should be set with a `http` listener, in the same way
-as the `listeners` option in the shared config.
+In the config file for each worker, you must specify:
+ * The type of worker (`worker_app`). The currently available worker applications are listed below.
+ * A unique name for the worker (`worker_name`).
+ * The HTTP replication endpoint that it should talk to on the main synapse process
+   (`worker_replication_host` and `worker_replication_http_port`)
+ * If handling HTTP requests, a `worker_listeners` option with an `http`
+   listener, in the same way as the `listeners` option in the shared config.
+ * If handling the `^/_matrix/client/v3/keys/upload` endpoint, the HTTP URI for
+   the main process (`worker_main_http_uri`).
 
 For example:
 
@@ -217,10 +220,12 @@ information.
     ^/_matrix/client/(api/v1|r0|v3|unstable)/search$
 
     # Encryption requests
+    # Note that ^/_matrix/client/(r0|v3|unstable)/keys/upload/ requires `worker_main_http_uri`
     ^/_matrix/client/(r0|v3|unstable)/keys/query$
     ^/_matrix/client/(r0|v3|unstable)/keys/changes$
     ^/_matrix/client/(r0|v3|unstable)/keys/claim$
     ^/_matrix/client/(r0|v3|unstable)/room_keys/
+    ^/_matrix/client/(r0|v3|unstable)/keys/upload/
 
     # Registration/login requests
     ^/_matrix/client/(api/v1|r0|v3|unstable)/login$
@@ -581,39 +586,16 @@ handle it, and are online.
 If `update_user_directory` is set to `false`, and this worker is not running,
 the above endpoint may give outdated results.
 
-### `synapse.app.frontend_proxy`
-
-Proxies some frequently-requested client endpoints to add caching and remove
-load from the main synapse. It can handle REST endpoints matching the following
-regular expressions:
-
-    ^/_matrix/client/(r0|v3|unstable)/keys/upload
-
-If `use_presence` is False in the homeserver config, it can also handle REST
-endpoints matching the following regular expressions:
-
-    ^/_matrix/client/(api/v1|r0|v3|unstable)/presence/[^/]+/status
-
-This "stub" presence handler will pass through `GET` request but make the
-`PUT` effectively a no-op.
-
-It will proxy any requests it cannot handle to the main synapse instance. It
-must therefore be configured with the location of the main instance, via
-the `worker_main_http_uri` setting in the `frontend_proxy` worker configuration
-file. For example:
-
-```yaml
-worker_main_http_uri: http://127.0.0.1:8008
-```
-
 ### Historical apps
 
-*Note:* Historically there used to be more apps, however they have been
-amalgamated into a single `synapse.app.generic_worker` app. The remaining apps
-are ones that do specific processing unrelated to requests, e.g. the `pusher`
-that handles sending out push notifications for new events. The intention is for
-all these to be folded into the `generic_worker` app and to use config to define
-which processes handle the various proccessing such as push notifications.
+The following used to be separate worker application types, but are now
+equivalent to `synapse.app.generic_worker`:
+
+ * `synapse.app.client_reader`
+ * `synapse.app.event_creator`
+ * `synapse.app.federation_reader`
+ * `synapse.app.frontend_proxy`
+ * `synapse.app.synchrotron`
 
 
 ## Migration from old config

mypy.ini

@@ -1,6 +1,6 @@
 [mypy]
 namespace_packages = True
-plugins = mypy_zope:plugin, scripts-dev/mypy_synapse_plugin.py
+plugins = pydantic.mypy, mypy_zope:plugin, scripts-dev/mypy_synapse_plugin.py
 follow_imports = normal
 check_untyped_defs = True
 show_error_codes = True

poetry.lock

@@ -7,10 +7,10 @@ optional = false
 python-versions = ">=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*"
 
 [package.extras]
-dev = ["coverage[toml] (>=5.0.2)", "hypothesis", "pympler", "pytest (>=4.3.0)", "six", "mypy", "pytest-mypy-plugins", "zope.interface", "furo", "sphinx", "sphinx-notfound-page", "pre-commit", "cloudpickle"]
-docs = ["furo", "sphinx", "zope.interface", "sphinx-notfound-page"]
-tests = ["coverage[toml] (>=5.0.2)", "hypothesis", "pympler", "pytest (>=4.3.0)", "six", "mypy", "pytest-mypy-plugins", "zope.interface", "cloudpickle"]
-tests_no_zope = ["coverage[toml] (>=5.0.2)", "hypothesis", "pympler", "pytest (>=4.3.0)", "six", "mypy", "pytest-mypy-plugins", "cloudpickle"]
+dev = ["cloudpickle", "coverage[toml] (>=5.0.2)", "furo", "hypothesis", "mypy", "pre-commit", "pympler", "pytest (>=4.3.0)", "pytest-mypy-plugins", "six", "sphinx", "sphinx-notfound-page", "zope.interface"]
+docs = ["furo", "sphinx", "sphinx-notfound-page", "zope.interface"]
+tests = ["cloudpickle", "coverage[toml] (>=5.0.2)", "hypothesis", "mypy", "pympler", "pytest (>=4.3.0)", "pytest-mypy-plugins", "six", "zope.interface"]
+tests_no_zope = ["cloudpickle", "coverage[toml] (>=5.0.2)", "hypothesis", "mypy", "pympler", "pytest (>=4.3.0)", "pytest-mypy-plugins", "six"]
 
 [[package]]
 name = "authlib"
@@ -39,7 +39,7 @@ attrs = ">=19.2.0"
 six = "*"
 
 [package.extras]
-visualize = ["graphviz (>0.5.1)", "Twisted (>=16.1.1)"]
+visualize = ["Twisted (>=16.1.1)", "graphviz (>0.5.1)"]
 
 [[package]]
 name = "bcrypt"
@@ -187,6 +187,17 @@ category = "main"
 optional = false
 python-versions = "*"
 
+[[package]]
+name = "coverage"
+version = "6.4.1"
+description = "Code coverage measurement for Python"
+category = "dev"
+optional = false
+python-versions = ">=3.7"
+
+[package.extras]
+toml = ["tomli"]
+
 [[package]]
 name = "cryptography"
 version = "36.0.1"
@@ -199,12 +210,12 @@ python-versions = ">=3.6"
 cffi = ">=1.12"
 
 [package.extras]
-docs = ["sphinx (>=1.6.5,!=1.8.0,!=3.1.0,!=3.1.1)", "sphinx-rtd-theme"]
-docstest = ["pyenchant (>=1.6.11)", "twine (>=1.12.0)", "sphinxcontrib-spelling (>=4.0.1)"]
+docs = ["sphinx (>=1.6.5,!=1.8.0,!=3.1.0,!=3.1.1)", "sphinx_rtd_theme"]
+docstest = ["pyenchant (>=1.6.11)", "sphinxcontrib-spelling (>=4.0.1)", "twine (>=1.12.0)"]
 pep8test = ["black", "flake8", "flake8-import-order", "pep8-naming"]
 sdist = ["setuptools_rust (>=0.11.4)"]
 ssh = ["bcrypt (>=3.1.5)"]
-test = ["pytest (>=6.2.0)", "pytest-cov", "pytest-subtests", "pytest-xdist", "pretend", "iso8601", "pytz", "hypothesis (>=1.11.4,!=3.79.2)"]
+test = ["hypothesis (>=1.11.4,!=3.79.2)", "iso8601", "pretend", "pytest (>=6.2.0)", "pytest-cov", "pytest-subtests", "pytest-xdist", "pytz"]
 
 [[package]]
 name = "defusedxml"
@@ -226,7 +237,7 @@ python-versions = ">=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*"
 wrapt = ">=1.10,<2"
 
 [package.extras]
-dev = ["tox", "bump2version (<1)", "sphinx (<2)", "importlib-metadata (<3)", "importlib-resources (<4)", "configparser (<5)", "sphinxcontrib-websupport (<2)", "zipp (<2)", "PyTest (<5)", "PyTest-Cov (<2.6)", "pytest", "pytest-cov"]
+dev = ["PyTest", "PyTest (<5)", "PyTest-Cov", "PyTest-Cov (<2.6)", "bump2version (<1)", "configparser (<5)", "importlib-metadata (<3)", "importlib-resources (<4)", "sphinx (<2)", "sphinxcontrib-websupport (<2)", "tox", "zipp (<2)"]
 
 [[package]]
 name = "docutils"
@@ -245,7 +256,7 @@ optional = true
 python-versions = ">=3.7"
 
 [package.extras]
-dev = ["tox", "coverage", "lxml", "xmlschema (>=1.8.0)", "sphinx", "memory-profiler", "flake8", "mypy (==0.910)"]
+dev = ["Sphinx", "coverage", "flake8", "lxml", "memory-profiler", "mypy (==0.910)", "tox", "xmlschema (>=1.8.0)"]
 
 [[package]]
 name = "flake8"
@@ -274,7 +285,7 @@ attrs = ">=19.2.0"
 flake8 = ">=3.0.0"
 
 [package.extras]
-dev = ["coverage", "black", "hypothesis", "hypothesmith"]
+dev = ["black", "coverage", "hypothesis", "hypothesmith"]
 
 [[package]]
 name = "flake8-comprehensions"
@@ -367,8 +378,8 @@ typing-extensions = {version = ">=3.6.4", markers = "python_version < \"3.8\""}
 zipp = ">=0.5"
 
 [package.extras]
-docs = ["sphinx", "jaraco.packaging (>=8.2)", "rst.linker (>=1.9)"]
-testing = ["pytest (>=4.6)", "pytest-checkdocs (>=2.4)", "pytest-flake8", "pytest-cov", "pytest-enabler (>=1.0.1)", "packaging", "pep517", "pyfakefs", "flufl.flake8", "pytest-black (>=0.3.7)", "pytest-mypy", "importlib-resources (>=1.3)"]
+docs = ["jaraco.packaging (>=8.2)", "rst.linker (>=1.9)", "sphinx"]
+testing = ["flufl.flake8", "importlib-resources (>=1.3)", "packaging", "pep517", "pyfakefs", "pytest (>=4.6)", "pytest-black (>=0.3.7)", "pytest-checkdocs (>=2.4)", "pytest-cov", "pytest-enabler (>=1.0.1)", "pytest-flake8", "pytest-mypy"]
 
 [[package]]
 name = "importlib-resources"
@@ -382,8 +393,8 @@ python-versions = ">=3.6"
 zipp = {version = ">=3.1.0", markers = "python_version < \"3.10\""}
 
 [package.extras]
-docs = ["sphinx", "jaraco.packaging (>=8.2)", "rst.linker (>=1.9)"]
-testing = ["pytest (>=6)", "pytest-checkdocs (>=2.4)", "pytest-flake8", "pytest-cov", "pytest-enabler (>=1.0.1)", "pytest-black (>=0.3.7)", "pytest-mypy"]
+docs = ["jaraco.packaging (>=8.2)", "rst.linker (>=1.9)", "sphinx"]
+testing = ["pytest (>=6)", "pytest-black (>=0.3.7)", "pytest-checkdocs (>=2.4)", "pytest-cov", "pytest-enabler (>=1.0.1)", "pytest-flake8", "pytest-mypy"]
 
 [[package]]
 name = "incremental"
@@ -405,9 +416,9 @@ optional = false
 python-versions = ">=3.6,<4.0"
 
 [package.extras]
-pipfile_deprecated_finder = ["pipreqs", "requirementslib"]
-requirements_deprecated_finder = ["pipreqs", "pip-api"]
 colors = ["colorama (>=0.4.3,<0.5.0)"]
+pipfile_deprecated_finder = ["pipreqs", "requirementslib"]
+requirements_deprecated_finder = ["pip-api", "pipreqs"]
 
 [[package]]
 name = "jaeger-client"
@@ -424,7 +435,7 @@ thrift = "*"
 tornado = ">=4.3"
 
 [package.extras]
-tests = ["mock", "pycurl", "pytest", "pytest-cov", "coverage", "pytest-timeout", "pytest-tornado", "pytest-benchmark", "pytest-localserver", "flake8", "flake8-quotes", "flake8-typing-imports", "codecov", "tchannel (==2.1.0)", "opentracing_instrumentation (>=3,<4)", "prometheus_client (==0.11.0)", "mypy"]
+tests = ["codecov", "coverage", "flake8", "flake8-quotes", "flake8-typing-imports", "mock", "mypy", "opentracing_instrumentation (>=3,<4)", "prometheus_client (==0.11.0)", "pycurl", "pytest", "pytest-benchmark[histogram]", "pytest-cov", "pytest-localserver", "pytest-timeout", "pytest-tornado", "tchannel (==2.1.0)"]
 
 [[package]]
 name = "jeepney"
@@ -435,8 +446,8 @@ optional = false
 python-versions = ">=3.6"
 
 [package.extras]
-test = ["pytest", "pytest-trio", "pytest-asyncio", "testpath", "trio", "async-timeout"]
-trio = ["trio", "async-generator"]
+test = ["async-timeout", "pytest", "pytest-asyncio", "pytest-trio", "testpath", "trio"]
+trio = ["async_generator", "trio"]
 
 [[package]]
 name = "jinja2"
@@ -486,8 +497,8 @@ pywin32-ctypes = {version = "<0.1.0 || >0.1.0,<0.1.1 || >0.1.1", markers = "sys_
 SecretStorage = {version = ">=3.2", markers = "sys_platform == \"linux\""}
 
 [package.extras]
-docs = ["sphinx", "jaraco.packaging (>=8.2)", "rst.linker (>=1.9)", "jaraco.tidelift (>=1.4)"]
-testing = ["pytest (>=6)", "pytest-checkdocs (>=2.4)", "pytest-flake8", "pytest-cov", "pytest-enabler (>=1.0.1)", "pytest-black (>=0.3.7)", "pytest-mypy"]
+docs = ["jaraco.packaging (>=8.2)", "jaraco.tidelift (>=1.4)", "rst.linker (>=1.9)", "sphinx"]
+testing = ["pytest (>=6)", "pytest-black (>=0.3.7)", "pytest-checkdocs (>=2.4)", "pytest-cov", "pytest-enabler (>=1.0.1)", "pytest-flake8", "pytest-mypy"]
 
 [[package]]
 name = "ldap3"
@@ -511,7 +522,7 @@ python-versions = ">=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, != 3.4.*"
 [package.extras]
 cssselect = ["cssselect (>=0.7)"]
 html5 = ["html5lib"]
-htmlsoup = ["beautifulsoup4"]
+htmlsoup = ["BeautifulSoup4"]
 source = ["Cython (>=0.29.7)"]
 
 [[package]]
@@ -535,12 +546,12 @@ attrs = "*"
 importlib-metadata = {version = ">=1.4", markers = "python_version < \"3.8\""}
 
 [package.extras]
-dev = ["tox", "twisted", "aiounittest", "mypy (==0.910)", "black (==22.3.0)", "flake8 (==4.0.1)", "isort (==5.9.3)", "build (==0.8.0)", "twine (==4.0.1)"]
-test = ["tox", "twisted", "aiounittest"]
+dev = ["aiounittest", "black (==22.3.0)", "build (==0.8.0)", "flake8 (==4.0.1)", "isort (==5.9.3)", "mypy (==0.910)", "tox", "twine (==4.0.1)", "twisted"]
+test = ["aiounittest", "tox", "twisted"]
 
 [[package]]
 name = "matrix-synapse-ldap3"
-version = "0.2.1"
+version = "0.2.2"
 description = "An LDAP3 auth provider for Synapse"
 category = "main"
 optional = true
@@ -552,7 +563,7 @@ service-identity = "*"
 Twisted = ">=15.1.0"
 
 [package.extras]
-dev = ["matrix-synapse", "tox", "ldaptor", "mypy (==0.910)", "types-setuptools", "black (==22.3.0)", "flake8 (==4.0.1)", "isort (==5.9.3)"]
+dev = ["black (==22.3.0)", "flake8 (==4.0.1)", "isort (==5.9.3)", "ldaptor", "matrix-synapse", "mypy (==0.910)", "tox", "types-setuptools"]
 
 [[package]]
 name = "mccabe"
@@ -611,7 +622,7 @@ mypy = "0.950"
 "zope.schema" = "*"
 
 [package.extras]
-test = ["pytest (>=4.6)", "pytest-cov", "lxml"]
+test = ["lxml", "pytest (>=4.6)", "pytest-cov"]
 
 [[package]]
 name = "netaddr"
@@ -630,7 +641,7 @@ optional = true
 python-versions = "*"
 
 [package.extras]
-tests = ["doubles", "flake8", "flake8-quotes", "mock", "pytest", "pytest-cov", "pytest-mock", "sphinx", "sphinx-rtd-theme", "six (>=1.10.0,<2.0)", "gevent", "tornado"]
+tests = ["Sphinx", "doubles", "flake8", "flake8-quotes", "gevent", "mock", "pytest", "pytest-cov", "pytest-mock", "six (>=1.10.0,<2.0)", "sphinx_rtd_theme", "tornado"]
 
 [[package]]
 name = "packaging"
@@ -778,6 +789,21 @@ category = "main"
 optional = false
 python-versions = ">=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*"
 
+[[package]]
+name = "pydantic"
+version = "1.9.1"
+description = "Data validation and settings management using python type hints"
+category = "main"
+optional = false
+python-versions = ">=3.6.1"
+
+[package.dependencies]
+typing-extensions = ">=3.7.4.3"
+
+[package.extras]
+dotenv = ["python-dotenv (>=0.10.4)"]
+email = ["email-validator (>=1.0.3)"]
+
 [[package]]
 name = "pyflakes"
 version = "2.4.0"
@@ -821,9 +847,9 @@ python-versions = ">=3.6"
 
 [package.extras]
 crypto = ["cryptography (>=3.3.1)"]
-dev = ["sphinx", "sphinx-rtd-theme", "zope.interface", "cryptography (>=3.3.1)", "pytest (>=6.0.0,<7.0.0)", "coverage[toml] (==5.0.4)", "mypy", "pre-commit"]
+dev = ["coverage[toml] (==5.0.4)", "cryptography (>=3.3.1)", "mypy", "pre-commit", "pytest (>=6.0.0,<7.0.0)", "sphinx", "sphinx-rtd-theme", "zope.interface"]
 docs = ["sphinx", "sphinx-rtd-theme", "zope.interface"]
-tests = ["pytest (>=6.0.0,<7.0.0)", "coverage[toml] (==5.0.4)"]
+tests = ["coverage[toml] (==5.0.4)", "pytest (>=6.0.0,<7.0.0)"]
 
 [[package]]
 name = "pymacaroons"
@@ -857,8 +883,8 @@ python-versions = ">=3.6"
 cffi = ">=1.4.1"
 
 [package.extras]
-docs = ["sphinx (>=1.6.5)", "sphinx-rtd-theme"]
-tests = ["pytest (>=3.2.1,!=3.3.0)", "hypothesis (>=3.27.0)"]
+docs = ["sphinx (>=1.6.5)", "sphinx_rtd_theme"]
+tests = ["hypothesis (>=3.27.0)", "pytest (>=3.2.1,!=3.3.0)"]
 
 [[package]]
 name = "pyopenssl"
@@ -910,11 +936,12 @@ pyOpenSSL = "*"
 python-dateutil = "*"
 pytz = "*"
 requests = ">=1.0.0"
+setuptools = "*"
 six = "*"
 xmlschema = ">=1.2.1"
 
 [package.extras]
-s2repoze = ["paste", "zope.interface", "repoze.who"]
+s2repoze = ["paste", "repoze.who", "zope.interface"]
 
 [[package]]
 name = "python-dateutil"
@@ -1039,11 +1066,11 @@ celery = ["celery (>=3)"]
 chalice = ["chalice (>=1.16.0)"]
 django = ["django (>=1.8)"]
 falcon = ["falcon (>=1.4)"]
-flask = ["flask (>=0.11)", "blinker (>=1.1)"]
+flask = ["blinker (>=1.1)", "flask (>=0.11)"]
 httpx = ["httpx (>=0.16.0)"]
-pure_eval = ["pure-eval", "executing", "asttokens"]
+pure_eval = ["asttokens", "executing", "pure-eval"]
 pyspark = ["pyspark (>=2.4.4)"]
-quart = ["quart (>=0.16.1)", "blinker (>=1.1)"]
+quart = ["blinker (>=1.1)", "quart (>=0.16.1)"]
 rq = ["rq (>=0.6)"]
 sanic = ["sanic (>=0.8)"]
 sqlalchemy = ["sqlalchemy (>=1.2)"]
@@ -1065,11 +1092,24 @@ pyasn1-modules = "*"
 six = "*"
 
 [package.extras]
-dev = ["coverage[toml] (>=5.0.2)", "pytest", "sphinx", "furo", "idna", "pyopenssl"]
-docs = ["sphinx", "furo"]
+dev = ["coverage[toml] (>=5.0.2)", "furo", "idna", "pyOpenSSL", "pytest", "sphinx"]
+docs = ["furo", "sphinx"]
 idna = ["idna"]
 tests = ["coverage[toml] (>=5.0.2)", "pytest"]
 
+[[package]]
+name = "setuptools"
+version = "65.3.0"
+description = "Easily download, build, install, upgrade, and uninstall Python packages"
+category = "main"
+optional = false
+python-versions = ">=3.7"
+
+[package.extras]
+docs = ["furo", "jaraco.packaging (>=9)", "jaraco.tidelift (>=1.4)", "pygments-github-lexers (==0.0.5)", "rst.linker (>=1.9)", "sphinx", "sphinx-favicon", "sphinx-hoverxref (<2)", "sphinx-inline-tabs", "sphinx-notfound-page (==0.8.3)", "sphinx-reredirects", "sphinxcontrib-towncrier"]
+testing = ["build[virtualenv]", "filelock (>=3.4.0)", "flake8 (<5)", "flake8-2020", "ini2toml[lite] (>=0.9)", "jaraco.envs (>=2.2)", "jaraco.path (>=3.2.0)", "mock", "pip (>=19.1)", "pip-run (>=8.8)", "pytest (>=6)", "pytest-black (>=0.3.7)", "pytest-checkdocs (>=2.4)", "pytest-cov", "pytest-enabler (>=1.3)", "pytest-flake8", "pytest-mypy (>=0.9.1)", "pytest-perf", "pytest-xdist", "tomli-w (>=1.0.0)", "virtualenv (>=13.0.0)", "wheel"]
+testing-integration = ["build[virtualenv]", "filelock (>=3.4.0)", "jaraco.envs (>=2.2)", "jaraco.path (>=3.2.0)", "pytest", "pytest-enabler", "pytest-xdist", "tomli", "virtualenv (>=13.0.0)", "wheel"]
+
 [[package]]
 name = "signedjson"
 version = "1.1.4"
@@ -1184,6 +1224,7 @@ click = "*"
 click-default-group = "*"
 incremental = "*"
 jinja2 = "*"
+setuptools = "*"
 tomli = {version = "*", markers = "python_version >= \"3.6\""}
 
 [package.extras]
@@ -1221,7 +1262,7 @@ requests = ">=2.1.0"
 Twisted = {version = ">=18.7.0", extras = ["tls"]}
 
 [package.extras]
-dev = ["pep8", "pyflakes", "httpbin (==0.5.0)"]
+dev = ["httpbin (==0.5.0)", "pep8", "pyflakes"]
 docs = ["sphinx (>=1.4.8)"]
 
 [[package]]
@@ -1266,20 +1307,20 @@ typing-extensions = ">=3.6.5"
 "zope.interface" = ">=4.4.2"
 
 [package.extras]
-all_non_platform = ["cython-test-exception-raiser (>=1.0.2,<2)", "PyHamcrest (>=1.9.0)", "pyopenssl (>=16.0.0)", "service-identity (>=18.1.0)", "idna (>=2.4)", "pyasn1", "cryptography (>=2.6)", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "pyserial (>=3.0)", "h2 (>=3.0,<5.0)", "priority (>=1.1.0,<2.0)", "pywin32 (!=226)", "contextvars (>=2.4,<3)"]
-conch = ["pyasn1", "cryptography (>=2.6)", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)"]
-conch_nacl = ["pyasn1", "cryptography (>=2.6)", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "pynacl"]
+all_non_platform = ["PyHamcrest (>=1.9.0)", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "contextvars (>=2.4,<3)", "cryptography (>=2.6)", "cython-test-exception-raiser (>=1.0.2,<2)", "h2 (>=3.0,<5.0)", "idna (>=2.4)", "priority (>=1.1.0,<2.0)", "pyasn1", "pyopenssl (>=16.0.0)", "pyserial (>=3.0)", "pywin32 (!=226)", "service-identity (>=18.1.0)"]
+conch = ["appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "cryptography (>=2.6)", "pyasn1"]
+conch_nacl = ["PyNaCl", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "cryptography (>=2.6)", "pyasn1"]
 contextvars = ["contextvars (>=2.4,<3)"]
-dev = ["towncrier (>=19.2,<20.0)", "sphinx-rtd-theme (>=0.5,<1.0)", "readthedocs-sphinx-ext (>=2.1,<3.0)", "sphinx (>=4.1.2,<6)", "pyflakes (>=2.2,<3.0)", "twistedchecker (>=0.7,<1.0)", "coverage (>=6b1,<7)", "python-subunit (>=1.4,<2.0)", "pydoctor (>=21.9.0,<21.10.0)"]
-dev_release = ["towncrier (>=19.2,<20.0)", "sphinx-rtd-theme (>=0.5,<1.0)", "readthedocs-sphinx-ext (>=2.1,<3.0)", "sphinx (>=4.1.2,<6)", "pydoctor (>=21.9.0,<21.10.0)"]
+dev = ["coverage (>=6b1,<7)", "pydoctor (>=21.9.0,<21.10.0)", "pyflakes (>=2.2,<3.0)", "python-subunit (>=1.4,<2.0)", "readthedocs-sphinx-ext (>=2.1,<3.0)", "sphinx (>=4.1.2,<6)", "sphinx-rtd-theme (>=0.5,<1.0)", "towncrier (>=19.2,<20.0)", "twistedchecker (>=0.7,<1.0)"]
+dev_release = ["pydoctor (>=21.9.0,<21.10.0)", "readthedocs-sphinx-ext (>=2.1,<3.0)", "sphinx (>=4.1.2,<6)", "sphinx-rtd-theme (>=0.5,<1.0)", "towncrier (>=19.2,<20.0)"]
 http2 = ["h2 (>=3.0,<5.0)", "priority (>=1.1.0,<2.0)"]
-macos_platform = ["pyobjc-core", "pyobjc-framework-cfnetwork", "pyobjc-framework-cocoa", "cython-test-exception-raiser (>=1.0.2,<2)", "PyHamcrest (>=1.9.0)", "pyopenssl (>=16.0.0)", "service-identity (>=18.1.0)", "idna (>=2.4)", "pyasn1", "cryptography (>=2.6)", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "pyserial (>=3.0)", "h2 (>=3.0,<5.0)", "priority (>=1.1.0,<2.0)", "pywin32 (!=226)", "contextvars (>=2.4,<3)"]
-mypy = ["mypy (==0.930)", "mypy-zope (==0.3.4)", "types-setuptools", "types-pyopenssl", "towncrier (>=19.2,<20.0)", "sphinx-rtd-theme (>=0.5,<1.0)", "readthedocs-sphinx-ext (>=2.1,<3.0)", "sphinx (>=4.1.2,<6)", "pyflakes (>=2.2,<3.0)", "twistedchecker (>=0.7,<1.0)", "coverage (>=6b1,<7)", "cython-test-exception-raiser (>=1.0.2,<2)", "PyHamcrest (>=1.9.0)", "pyopenssl (>=16.0.0)", "service-identity (>=18.1.0)", "idna (>=2.4)", "pyasn1", "cryptography (>=2.6)", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "pyserial (>=3.0)", "h2 (>=3.0,<5.0)", "priority (>=1.1.0,<2.0)", "pynacl", "pywin32 (!=226)", "python-subunit (>=1.4,<2.0)", "contextvars (>=2.4,<3)", "pydoctor (>=21.9.0,<21.10.0)"]
-osx_platform = ["pyobjc-core", "pyobjc-framework-cfnetwork", "pyobjc-framework-cocoa", "cython-test-exception-raiser (>=1.0.2,<2)", "PyHamcrest (>=1.9.0)", "pyopenssl (>=16.0.0)", "service-identity (>=18.1.0)", "idna (>=2.4)", "pyasn1", "cryptography (>=2.6)", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "pyserial (>=3.0)", "h2 (>=3.0,<5.0)", "priority (>=1.1.0,<2.0)", "pywin32 (!=226)", "contextvars (>=2.4,<3)"]
+macos_platform = ["PyHamcrest (>=1.9.0)", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "contextvars (>=2.4,<3)", "cryptography (>=2.6)", "cython-test-exception-raiser (>=1.0.2,<2)", "h2 (>=3.0,<5.0)", "idna (>=2.4)", "priority (>=1.1.0,<2.0)", "pyasn1", "pyobjc-core", "pyobjc-framework-CFNetwork", "pyobjc-framework-Cocoa", "pyopenssl (>=16.0.0)", "pyserial (>=3.0)", "pywin32 (!=226)", "service-identity (>=18.1.0)"]
+mypy = ["PyHamcrest (>=1.9.0)", "PyNaCl", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "contextvars (>=2.4,<3)", "coverage (>=6b1,<7)", "cryptography (>=2.6)", "cython-test-exception-raiser (>=1.0.2,<2)", "h2 (>=3.0,<5.0)", "idna (>=2.4)", "mypy (==0.930)", "mypy-zope (==0.3.4)", "priority (>=1.1.0,<2.0)", "pyasn1", "pydoctor (>=21.9.0,<21.10.0)", "pyflakes (>=2.2,<3.0)", "pyopenssl (>=16.0.0)", "pyserial (>=3.0)", "python-subunit (>=1.4,<2.0)", "pywin32 (!=226)", "readthedocs-sphinx-ext (>=2.1,<3.0)", "service-identity (>=18.1.0)", "sphinx (>=4.1.2,<6)", "sphinx-rtd-theme (>=0.5,<1.0)", "towncrier (>=19.2,<20.0)", "twistedchecker (>=0.7,<1.0)", "types-pyOpenSSL", "types-setuptools"]
+osx_platform = ["PyHamcrest (>=1.9.0)", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "contextvars (>=2.4,<3)", "cryptography (>=2.6)", "cython-test-exception-raiser (>=1.0.2,<2)", "h2 (>=3.0,<5.0)", "idna (>=2.4)", "priority (>=1.1.0,<2.0)", "pyasn1", "pyobjc-core", "pyobjc-framework-CFNetwork", "pyobjc-framework-Cocoa", "pyopenssl (>=16.0.0)", "pyserial (>=3.0)", "pywin32 (!=226)", "service-identity (>=18.1.0)"]
 serial = ["pyserial (>=3.0)", "pywin32 (!=226)"]
-test = ["cython-test-exception-raiser (>=1.0.2,<2)", "PyHamcrest (>=1.9.0)"]
-tls = ["pyopenssl (>=16.0.0)", "service-identity (>=18.1.0)", "idna (>=2.4)"]
-windows_platform = ["pywin32 (!=226)", "cython-test-exception-raiser (>=1.0.2,<2)", "PyHamcrest (>=1.9.0)", "pyopenssl (>=16.0.0)", "service-identity (>=18.1.0)", "idna (>=2.4)", "pyasn1", "cryptography (>=2.6)", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "pyserial (>=3.0)", "h2 (>=3.0,<5.0)", "priority (>=1.1.0,<2.0)", "pywin32 (!=226)", "contextvars (>=2.4,<3)"]
+test = ["PyHamcrest (>=1.9.0)", "cython-test-exception-raiser (>=1.0.2,<2)"]
+tls = ["idna (>=2.4)", "pyopenssl (>=16.0.0)", "service-identity (>=18.1.0)"]
+windows_platform = ["PyHamcrest (>=1.9.0)", "appdirs (>=1.4.0)", "bcrypt (>=3.0.0)", "contextvars (>=2.4,<3)", "cryptography (>=2.6)", "cython-test-exception-raiser (>=1.0.2,<2)", "h2 (>=3.0,<5.0)", "idna (>=2.4)", "priority (>=1.1.0,<2.0)", "pyasn1", "pyopenssl (>=16.0.0)", "pyserial (>=3.0)", "pywin32 (!=226)", "pywin32 (!=226)", "service-identity (>=18.1.0)"]
 
 [[package]]
 name = "twisted-iocpsupport"
@@ -1457,7 +1498,7 @@ python-versions = ">=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*, <4"
 
 [package.extras]
 brotli = ["brotlipy (>=0.6.0)"]
-secure = ["pyOpenSSL (>=0.14)", "cryptography (>=1.3.4)", "idna (>=2.0.0)", "certifi", "ipaddress"]
+secure = ["certifi", "cryptography (>=1.3.4)", "idna (>=2.0.0)", "ipaddress", "pyOpenSSL (>=0.14)"]
 socks = ["PySocks (>=1.5.6,!=1.5.7,<2.0)"]
 
 [[package]]
@@ -1489,8 +1530,8 @@ elementpath = ">=2.5.0,<3.0.0"
 
 [package.extras]
 codegen = ["elementpath (>=2.5.0,<3.0.0)", "jinja2"]
-dev = ["tox", "coverage", "lxml", "elementpath (>=2.5.0,<3.0.0)", "memory-profiler", "sphinx", "sphinx-rtd-theme", "jinja2", "flake8", "mypy", "lxml-stubs"]
-docs = ["elementpath (>=2.5.0,<3.0.0)", "sphinx", "sphinx-rtd-theme", "jinja2"]
+dev = ["Sphinx", "coverage", "elementpath (>=2.5.0,<3.0.0)", "flake8", "jinja2", "lxml", "lxml-stubs", "memory-profiler", "mypy", "sphinx-rtd-theme", "tox"]
+docs = ["Sphinx", "elementpath (>=2.5.0,<3.0.0)", "jinja2", "sphinx-rtd-theme"]
 
 [[package]]
 name = "zipp"
@@ -1501,8 +1542,8 @@ optional = false
 python-versions = ">=3.7"
 
 [package.extras]
-docs = ["sphinx", "jaraco.packaging (>=8.2)", "rst.linker (>=1.9)"]
-testing = ["pytest (>=6)", "pytest-checkdocs (>=2.4)", "pytest-flake8", "pytest-cov", "pytest-enabler (>=1.0.1)", "jaraco.itertools", "func-timeout", "pytest-black (>=0.3.7)", "pytest-mypy"]
+docs = ["jaraco.packaging (>=8.2)", "rst.linker (>=1.9)", "sphinx"]
+testing = ["func-timeout", "jaraco.itertools", "pytest (>=6)", "pytest-black (>=0.3.7)", "pytest-checkdocs (>=2.4)", "pytest-cov", "pytest-enabler (>=1.0.1)", "pytest-flake8", "pytest-mypy"]
 
 [[package]]
 name = "zope.event"
@@ -1512,8 +1553,11 @@ category = "dev"
 optional = false
 python-versions = "*"
 
+[package.dependencies]
+setuptools = "*"
+
 [package.extras]
-docs = ["sphinx"]
+docs = ["Sphinx"]
 test = ["zope.testrunner"]
 
 [[package]]
@@ -1524,8 +1568,11 @@ category = "main"
 optional = false
 python-versions = ">=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*"
 
+[package.dependencies]
+setuptools = "*"
+
 [package.extras]
-docs = ["sphinx", "repoze.sphinx.autointerface"]
+docs = ["Sphinx", "repoze.sphinx.autointerface"]
 test = ["coverage (>=5.0.3)", "zope.event", "zope.testing"]
 testing = ["coverage (>=5.0.3)", "zope.event", "zope.testing"]
 
@@ -1538,11 +1585,12 @@ optional = false
 python-versions = ">=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*"
 
 [package.dependencies]
+setuptools = "*"
 "zope.event" = "*"
 "zope.interface" = ">=5.0.0"
 
 [package.extras]
-docs = ["sphinx", "repoze.sphinx.autointerface"]
+docs = ["Sphinx", "repoze.sphinx.autointerface"]
 test = ["zope.i18nmessageid", "zope.testing", "zope.testrunner"]
 
 [extras]
@@ -1563,7 +1611,7 @@ url_preview = ["lxml"]
 [metadata]
 lock-version = "1.1"
 python-versions = "^3.7.1"
-content-hash = "c24bbcee7e86dbbe7cdbf49f91a25b310bf21095452641e7440129f59b077f78"
+content-hash = "7de518bf27967b3547eab8574342cfb67f87d6b47b4145c13de11112141dbf2d"
 
 [metadata.files]
 attrs = [
@@ -1702,6 +1750,49 @@ constantly = [
     {file = "constantly-15.1.0-py2.py3-none-any.whl", hash = "sha256:dd2fa9d6b1a51a83f0d7dd76293d734046aa176e384bf6e33b7e44880eb37c5d"},
     {file = "constantly-15.1.0.tar.gz", hash = "sha256:586372eb92059873e29eba4f9dec8381541b4d3834660707faf8ba59146dfc35"},
 ]
+coverage = [
+    {file = "coverage-6.4.1-cp310-cp310-macosx_10_9_x86_64.whl", hash = "sha256:f1d5aa2703e1dab4ae6cf416eb0095304f49d004c39e9db1d86f57924f43006b"},
+    {file = "coverage-6.4.1-cp310-cp310-macosx_11_0_arm64.whl", hash = "sha256:4ce1b258493cbf8aec43e9b50d89982346b98e9ffdfaae8ae5793bc112fb0068"},
+    {file = "coverage-6.4.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:83c4e737f60c6936460c5be330d296dd5b48b3963f48634c53b3f7deb0f34ec4"},
+    {file = "coverage-6.4.1-cp310-cp310-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:84e65ef149028516c6d64461b95a8dbcfce95cfd5b9eb634320596173332ea84"},
+    {file = "coverage-6.4.1-cp310-cp310-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:f69718750eaae75efe506406c490d6fc5a6161d047206cc63ce25527e8a3adad"},
+    {file = "coverage-6.4.1-cp310-cp310-musllinux_1_1_aarch64.whl", hash = "sha256:e57816f8ffe46b1df8f12e1b348f06d164fd5219beba7d9433ba79608ef011cc"},
+    {file = "coverage-6.4.1-cp310-cp310-musllinux_1_1_i686.whl", hash = "sha256:01c5615d13f3dd3aa8543afc069e5319cfa0c7d712f6e04b920431e5c564a749"},
+    {file = "coverage-6.4.1-cp310-cp310-musllinux_1_1_x86_64.whl", hash = "sha256:75ab269400706fab15981fd4bd5080c56bd5cc07c3bccb86aab5e1d5a88dc8f4"},
+    {file = "coverage-6.4.1-cp310-cp310-win32.whl", hash = "sha256:a7f3049243783df2e6cc6deafc49ea123522b59f464831476d3d1448e30d72df"},
+    {file = "coverage-6.4.1-cp310-cp310-win_amd64.whl", hash = "sha256:ee2ddcac99b2d2aec413e36d7a429ae9ebcadf912946b13ffa88e7d4c9b712d6"},
+    {file = "coverage-6.4.1-cp37-cp37m-macosx_10_9_x86_64.whl", hash = "sha256:fb73e0011b8793c053bfa85e53129ba5f0250fdc0392c1591fd35d915ec75c46"},
+    {file = "coverage-6.4.1-cp37-cp37m-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:106c16dfe494de3193ec55cac9640dd039b66e196e4641fa8ac396181578b982"},
+    {file = "coverage-6.4.1-cp37-cp37m-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:87f4f3df85aa39da00fd3ec4b5abeb7407e82b68c7c5ad181308b0e2526da5d4"},
+    {file = "coverage-6.4.1-cp37-cp37m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:961e2fb0680b4f5ad63234e0bf55dfb90d302740ae9c7ed0120677a94a1590cb"},
+    {file = "coverage-6.4.1-cp37-cp37m-musllinux_1_1_aarch64.whl", hash = "sha256:cec3a0f75c8f1031825e19cd86ee787e87cf03e4fd2865c79c057092e69e3a3b"},
+    {file = "coverage-6.4.1-cp37-cp37m-musllinux_1_1_i686.whl", hash = "sha256:129cd05ba6f0d08a766d942a9ed4b29283aff7b2cccf5b7ce279d50796860bb3"},
+    {file = "coverage-6.4.1-cp37-cp37m-musllinux_1_1_x86_64.whl", hash = "sha256:bf5601c33213d3cb19d17a796f8a14a9eaa5e87629a53979a5981e3e3ae166f6"},
+    {file = "coverage-6.4.1-cp37-cp37m-win32.whl", hash = "sha256:269eaa2c20a13a5bf17558d4dc91a8d078c4fa1872f25303dddcbba3a813085e"},
+    {file = "coverage-6.4.1-cp37-cp37m-win_amd64.whl", hash = "sha256:f02cbbf8119db68455b9d763f2f8737bb7db7e43720afa07d8eb1604e5c5ae28"},
+    {file = "coverage-6.4.1-cp38-cp38-macosx_10_9_x86_64.whl", hash = "sha256:ffa9297c3a453fba4717d06df579af42ab9a28022444cae7fa605af4df612d54"},
+    {file = "coverage-6.4.1-cp38-cp38-macosx_11_0_arm64.whl", hash = "sha256:145f296d00441ca703a659e8f3eb48ae39fb083baba2d7ce4482fb2723e050d9"},
+    {file = "coverage-6.4.1-cp38-cp38-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:d67d44996140af8b84284e5e7d398e589574b376fb4de8ccd28d82ad8e3bea13"},
+    {file = "coverage-6.4.1-cp38-cp38-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:2bd9a6fc18aab8d2e18f89b7ff91c0f34ff4d5e0ba0b33e989b3cd4194c81fd9"},
+    {file = "coverage-6.4.1-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:3384f2a3652cef289e38100f2d037956194a837221edd520a7ee5b42d00cc605"},
+    {file = "coverage-6.4.1-cp38-cp38-musllinux_1_1_aarch64.whl", hash = "sha256:9b3e07152b4563722be523e8cd0b209e0d1a373022cfbde395ebb6575bf6790d"},
+    {file = "coverage-6.4.1-cp38-cp38-musllinux_1_1_i686.whl", hash = "sha256:1480ff858b4113db2718848d7b2d1b75bc79895a9c22e76a221b9d8d62496428"},
+    {file = "coverage-6.4.1-cp38-cp38-musllinux_1_1_x86_64.whl", hash = "sha256:865d69ae811a392f4d06bde506d531f6a28a00af36f5c8649684a9e5e4a85c83"},
+    {file = "coverage-6.4.1-cp38-cp38-win32.whl", hash = "sha256:664a47ce62fe4bef9e2d2c430306e1428ecea207ffd68649e3b942fa8ea83b0b"},
+    {file = "coverage-6.4.1-cp38-cp38-win_amd64.whl", hash = "sha256:26dff09fb0d82693ba9e6231248641d60ba606150d02ed45110f9ec26404ed1c"},
+    {file = "coverage-6.4.1-cp39-cp39-macosx_10_9_x86_64.whl", hash = "sha256:d9c80df769f5ec05ad21ea34be7458d1dc51ff1fb4b2219e77fe24edf462d6df"},
+    {file = "coverage-6.4.1-cp39-cp39-macosx_11_0_arm64.whl", hash = "sha256:39ee53946bf009788108b4dd2894bf1349b4e0ca18c2016ffa7d26ce46b8f10d"},
+    {file = "coverage-6.4.1-cp39-cp39-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:f5b66caa62922531059bc5ac04f836860412f7f88d38a476eda0a6f11d4724f4"},
+    {file = "coverage-6.4.1-cp39-cp39-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:fd180ed867e289964404051a958f7cccabdeed423f91a899829264bb7974d3d3"},
+    {file = "coverage-6.4.1-cp39-cp39-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:84631e81dd053e8a0d4967cedab6db94345f1c36107c71698f746cb2636c63e3"},
+    {file = "coverage-6.4.1-cp39-cp39-musllinux_1_1_aarch64.whl", hash = "sha256:8c08da0bd238f2970230c2a0d28ff0e99961598cb2e810245d7fc5afcf1254e8"},
+    {file = "coverage-6.4.1-cp39-cp39-musllinux_1_1_i686.whl", hash = "sha256:d42c549a8f41dc103a8004b9f0c433e2086add8a719da00e246e17cbe4056f72"},
+    {file = "coverage-6.4.1-cp39-cp39-musllinux_1_1_x86_64.whl", hash = "sha256:309ce4a522ed5fca432af4ebe0f32b21d6d7ccbb0f5fcc99290e71feba67c264"},
+    {file = "coverage-6.4.1-cp39-cp39-win32.whl", hash = "sha256:fdb6f7bd51c2d1714cea40718f6149ad9be6a2ee7d93b19e9f00934c0f2a74d9"},
+    {file = "coverage-6.4.1-cp39-cp39-win_amd64.whl", hash = "sha256:342d4aefd1c3e7f620a13f4fe563154d808b69cccef415415aece4c786665397"},
+    {file = "coverage-6.4.1-pp36.pp37.pp38-none-any.whl", hash = "sha256:4803e7ccf93230accb928f3a68f00ffa80a88213af98ed338a57ad021ef06815"},
+    {file = "coverage-6.4.1.tar.gz", hash = "sha256:4321f075095a096e70aff1d002030ee612b65a205a0a0f5b815280d5dc58100c"},
+]
 cryptography = [
     {file = "cryptography-36.0.1-cp36-abi3-macosx_10_10_universal2.whl", hash = "sha256:73bc2d3f2444bcfeac67dd130ff2ea598ea5f20b40e36d19821b4df8c9c5037b"},
     {file = "cryptography-36.0.1-cp36-abi3-macosx_10_10_x86_64.whl", hash = "sha256:2d87cdcb378d3cfed944dac30596da1968f88fb96d7fc34fdae30a99054b2e31"},
@@ -2055,8 +2146,8 @@ matrix-common = [
     {file = "matrix_common-1.2.1.tar.gz", hash = "sha256:a99dcf02a6bd95b24a5a61b354888a2ac92bf2b4b839c727b8dd9da2cdfa3853"},
 ]
 matrix-synapse-ldap3 = [
-    {file = "matrix-synapse-ldap3-0.2.1.tar.gz", hash = "sha256:bfb4390f4a262ffb0d6f057ff3aeb1e46d4e52ff420a064d795fb4f555f00285"},
-    {file = "matrix_synapse_ldap3-0.2.1-py3-none-any.whl", hash = "sha256:1b3310a60f1d06466f35905a269b6df95747fd1305f2b7fe638f373963b2aa2c"},
+    {file = "matrix-synapse-ldap3-0.2.2.tar.gz", hash = "sha256:b388d95693486eef69adaefd0fd9e84463d52fe17b0214a00efcaa669b73cb74"},
+    {file = "matrix_synapse_ldap3-0.2.2-py3-none-any.whl", hash = "sha256:66ee4c85d7952c6c27fd04c09cdfdf4847b8e8b7d6a7ada6ba1100013bda060f"},
 ]
 mccabe = [
     {file = "mccabe-0.6.1-py2.py3-none-any.whl", hash = "sha256:ab8a6258860da4b6677da4bd2fe5dc2c659cff31b3ee4f7f5d64e79735b80d42"},
@@ -2260,6 +2351,43 @@ pycparser = [
     {file = "pycparser-2.21-py2.py3-none-any.whl", hash = "sha256:8ee45429555515e1f6b185e78100aea234072576aa43ab53aefcae078162fca9"},
     {file = "pycparser-2.21.tar.gz", hash = "sha256:e644fdec12f7872f86c58ff790da456218b10f863970249516d60a5eaca77206"},
 ]
+pydantic = [
+    {file = "pydantic-1.9.1-cp310-cp310-macosx_10_9_x86_64.whl", hash = "sha256:c8098a724c2784bf03e8070993f6d46aa2eeca031f8d8a048dff277703e6e193"},
+    {file = "pydantic-1.9.1-cp310-cp310-macosx_11_0_arm64.whl", hash = "sha256:c320c64dd876e45254bdd350f0179da737463eea41c43bacbee9d8c9d1021f11"},
+    {file = "pydantic-1.9.1-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:18f3e912f9ad1bdec27fb06b8198a2ccc32f201e24174cec1b3424dda605a310"},
+    {file = "pydantic-1.9.1-cp310-cp310-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:c11951b404e08b01b151222a1cb1a9f0a860a8153ce8334149ab9199cd198131"},
+    {file = "pydantic-1.9.1-cp310-cp310-musllinux_1_1_i686.whl", hash = "sha256:8bc541a405423ce0e51c19f637050acdbdf8feca34150e0d17f675e72d119580"},
+    {file = "pydantic-1.9.1-cp310-cp310-musllinux_1_1_x86_64.whl", hash = "sha256:e565a785233c2d03724c4dc55464559639b1ba9ecf091288dd47ad9c629433bd"},
+    {file = "pydantic-1.9.1-cp310-cp310-win_amd64.whl", hash = "sha256:a4a88dcd6ff8fd47c18b3a3709a89adb39a6373f4482e04c1b765045c7e282fd"},
+    {file = "pydantic-1.9.1-cp36-cp36m-macosx_10_9_x86_64.whl", hash = "sha256:447d5521575f18e18240906beadc58551e97ec98142266e521c34968c76c8761"},
+    {file = "pydantic-1.9.1-cp36-cp36m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:985ceb5d0a86fcaa61e45781e567a59baa0da292d5ed2e490d612d0de5796918"},
+    {file = "pydantic-1.9.1-cp36-cp36m-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:059b6c1795170809103a1538255883e1983e5b831faea6558ef873d4955b4a74"},
+    {file = "pydantic-1.9.1-cp36-cp36m-musllinux_1_1_i686.whl", hash = "sha256:d12f96b5b64bec3f43c8e82b4aab7599d0157f11c798c9f9c528a72b9e0b339a"},
+    {file = "pydantic-1.9.1-cp36-cp36m-musllinux_1_1_x86_64.whl", hash = "sha256:ae72f8098acb368d877b210ebe02ba12585e77bd0db78ac04a1ee9b9f5dd2166"},
+    {file = "pydantic-1.9.1-cp36-cp36m-win_amd64.whl", hash = "sha256:79b485767c13788ee314669008d01f9ef3bc05db9ea3298f6a50d3ef596a154b"},
+    {file = "pydantic-1.9.1-cp37-cp37m-macosx_10_9_x86_64.whl", hash = "sha256:494f7c8537f0c02b740c229af4cb47c0d39840b829ecdcfc93d91dcbb0779892"},
+    {file = "pydantic-1.9.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:f0f047e11febe5c3198ed346b507e1d010330d56ad615a7e0a89fae604065a0e"},
+    {file = "pydantic-1.9.1-cp37-cp37m-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:969dd06110cb780da01336b281f53e2e7eb3a482831df441fb65dd30403f4608"},
+    {file = "pydantic-1.9.1-cp37-cp37m-musllinux_1_1_i686.whl", hash = "sha256:177071dfc0df6248fd22b43036f936cfe2508077a72af0933d0c1fa269b18537"},
+    {file = "pydantic-1.9.1-cp37-cp37m-musllinux_1_1_x86_64.whl", hash = "sha256:9bcf8b6e011be08fb729d110f3e22e654a50f8a826b0575c7196616780683380"},
+    {file = "pydantic-1.9.1-cp37-cp37m-win_amd64.whl", hash = "sha256:a955260d47f03df08acf45689bd163ed9df82c0e0124beb4251b1290fa7ae728"},
+    {file = "pydantic-1.9.1-cp38-cp38-macosx_10_9_x86_64.whl", hash = "sha256:9ce157d979f742a915b75f792dbd6aa63b8eccaf46a1005ba03aa8a986bde34a"},
+    {file = "pydantic-1.9.1-cp38-cp38-macosx_11_0_arm64.whl", hash = "sha256:0bf07cab5b279859c253d26a9194a8906e6f4a210063b84b433cf90a569de0c1"},
+    {file = "pydantic-1.9.1-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:5d93d4e95eacd313d2c765ebe40d49ca9dd2ed90e5b37d0d421c597af830c195"},
+    {file = "pydantic-1.9.1-cp38-cp38-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:1542636a39c4892c4f4fa6270696902acb186a9aaeac6f6cf92ce6ae2e88564b"},
+    {file = "pydantic-1.9.1-cp38-cp38-musllinux_1_1_i686.whl", hash = "sha256:a9af62e9b5b9bc67b2a195ebc2c2662fdf498a822d62f902bf27cccb52dbbf49"},
+    {file = "pydantic-1.9.1-cp38-cp38-musllinux_1_1_x86_64.whl", hash = "sha256:fe4670cb32ea98ffbf5a1262f14c3e102cccd92b1869df3bb09538158ba90fe6"},
+    {file = "pydantic-1.9.1-cp38-cp38-win_amd64.whl", hash = "sha256:9f659a5ee95c8baa2436d392267988fd0f43eb774e5eb8739252e5a7e9cf07e0"},
+    {file = "pydantic-1.9.1-cp39-cp39-macosx_10_9_x86_64.whl", hash = "sha256:b83ba3825bc91dfa989d4eed76865e71aea3a6ca1388b59fc801ee04c4d8d0d6"},
+    {file = "pydantic-1.9.1-cp39-cp39-macosx_11_0_arm64.whl", hash = "sha256:1dd8fecbad028cd89d04a46688d2fcc14423e8a196d5b0a5c65105664901f810"},
+    {file = "pydantic-1.9.1-cp39-cp39-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:02eefd7087268b711a3ff4db528e9916ac9aa18616da7bca69c1871d0b7a091f"},
+    {file = "pydantic-1.9.1-cp39-cp39-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:7eb57ba90929bac0b6cc2af2373893d80ac559adda6933e562dcfb375029acee"},
+    {file = "pydantic-1.9.1-cp39-cp39-musllinux_1_1_i686.whl", hash = "sha256:4ce9ae9e91f46c344bec3b03d6ee9612802682c1551aaf627ad24045ce090761"},
+    {file = "pydantic-1.9.1-cp39-cp39-musllinux_1_1_x86_64.whl", hash = "sha256:72ccb318bf0c9ab97fc04c10c37683d9eea952ed526707fabf9ac5ae59b701fd"},
+    {file = "pydantic-1.9.1-cp39-cp39-win_amd64.whl", hash = "sha256:61b6760b08b7c395975d893e0b814a11cf011ebb24f7d869e7118f5a339a82e1"},
+    {file = "pydantic-1.9.1-py3-none-any.whl", hash = "sha256:4988c0f13c42bfa9ddd2fe2f569c9d54646ce84adc5de84228cfe83396f3bd58"},
+    {file = "pydantic-1.9.1.tar.gz", hash = "sha256:1ed987c3ff29fff7fd8c3ea3a3ea877ad310aae2ef9889a119e22d3f2db0691a"},
+]
 pyflakes = [
     {file = "pyflakes-2.4.0-py2.py3-none-any.whl", hash = "sha256:3bb3a3f256f4b7968c9c788781e4ff07dce46bdf12339dcda61053375426ee2e"},
     {file = "pyflakes-2.4.0.tar.gz", hash = "sha256:05a85c2872edf37a4ed30b0cce2f6093e1d0581f8c19d7393122da7e25b2b24c"},
@@ -2406,6 +2534,10 @@ service-identity = [
     {file = "service-identity-21.1.0.tar.gz", hash = "sha256:6e6c6086ca271dc11b033d17c3a8bea9f24ebff920c587da090afc9519419d34"},
     {file = "service_identity-21.1.0-py2.py3-none-any.whl", hash = "sha256:f0b0caac3d40627c3c04d7a51b6e06721857a0e10a8775f2d1d7e72901b3a7db"},
 ]
+setuptools = [
+    {file = "setuptools-65.3.0-py3-none-any.whl", hash = "sha256:2e24e0bec025f035a2e72cdd1961119f557d78ad331bb00ff82efb2ab8da8e82"},
+    {file = "setuptools-65.3.0.tar.gz", hash = "sha256:7732871f4f7fa58fb6bdcaeadb0161b2bd046c85905dbaa066bdcbcc81953b57"},
+]
 signedjson = [
     {file = "signedjson-1.1.4-py3-none-any.whl", hash = "sha256:45569ec54241c65d2403fe3faf7169be5322547706a231e884ca2b427f23d228"},
     {file = "signedjson-1.1.4.tar.gz", hash = "sha256:cd91c56af53f169ef032c62e9c4a3292dc158866933318d0592e3462db3d6492"},

pyproject.toml

@@ -54,7 +54,7 @@ skip_gitignore = true
 
 [tool.poetry]
 name = "matrix-synapse"
-version = "1.64.0rc1"
+version = "1.66.0"
 description = "Homeserver for the Matrix decentralised comms protocol"
 authors = ["Matrix.org Team and Contributors <packages@matrix.org>"]
 license = "Apache-2.0"
@@ -158,6 +158,9 @@ packaging = ">=16.1"
 # At the time of writing, we only use functions from the version `importlib.metadata`
 # which shipped in Python 3.8. This corresponds to version 1.4 of the backport.
 importlib_metadata = { version = ">=1.4", python = "<3.8" }
+# This is the most recent version of Pydantic with available on common distros.
+pydantic = ">=1.7.4"
+
 
 
 # Optional Dependencies
@@ -280,6 +283,7 @@ pygithub = "==1.55"
 twine = "*"
 # Towncrier min version comes from #3425. Rationale unclear.
 towncrier = ">=18.6.0rc1"
+coverage = "^6.4.1"
 
 [build-system]
 requires = ["poetry-core>=1.0.0"]

scripts-dev/check_pydantic_models.py

@@ -0,0 +1,425 @@
+#! /usr/bin/env python
+# Copyright 2022 The Matrix.org Foundation C.I.C.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+"""
+A script which enforces that Synapse always uses strict types when defining a Pydantic
+model.
+
+Pydantic does not yet offer a strict mode, but it is planned for pydantic v2. See
+
+    https://github.com/pydantic/pydantic/issues/1098
+    https://pydantic-docs.helpmanual.io/blog/pydantic-v2/#strict-mode
+
+until then, this script is a best effort to stop us from introducing type coersion bugs
+(like the infamous stringy power levels fixed in room version 10).
+"""
+import argparse
+import contextlib
+import functools
+import importlib
+import logging
+import os
+import pkgutil
+import sys
+import textwrap
+import traceback
+import unittest.mock
+from contextlib import contextmanager
+from typing import Any, Callable, Dict, Generator, List, Set, Type, TypeVar
+
+from parameterized import parameterized
+from pydantic import BaseModel as PydanticBaseModel, conbytes, confloat, conint, constr
+from pydantic.typing import get_args
+from typing_extensions import ParamSpec
+
+logger = logging.getLogger(__name__)
+
+CONSTRAINED_TYPE_FACTORIES_WITH_STRICT_FLAG: List[Callable] = [
+    constr,
+    conbytes,
+    conint,
+    confloat,
+]
+
+TYPES_THAT_PYDANTIC_WILL_COERCE_TO = [
+    str,
+    bytes,
+    int,
+    float,
+    bool,
+]
+
+
+P = ParamSpec("P")
+R = TypeVar("R")
+
+
+class ModelCheckerException(Exception):
+    """Dummy exception. Allows us to detect unwanted types during a module import."""
+
+
+class MissingStrictInConstrainedTypeException(ModelCheckerException):
+    factory_name: str
+
+    def __init__(self, factory_name: str):
+        self.factory_name = factory_name
+
+
+class FieldHasUnwantedTypeException(ModelCheckerException):
+    message: str
+
+    def __init__(self, message: str):
+        self.message = message
+
+
+def make_wrapper(factory: Callable[P, R]) -> Callable[P, R]:
+    """We patch `constr` and friends with wrappers that enforce strict=True."""
+
+    @functools.wraps(factory)
+    def wrapper(*args: P.args, **kwargs: P.kwargs) -> R:
+        # type-ignore: should be redundant once we can use https://github.com/python/mypy/pull/12668
+        if "strict" not in kwargs:  # type: ignore[attr-defined]
+            raise MissingStrictInConstrainedTypeException(factory.__name__)
+        if not kwargs["strict"]:  # type: ignore[index]
+            raise MissingStrictInConstrainedTypeException(factory.__name__)
+        return factory(*args, **kwargs)
+
+    return wrapper
+
+
+def field_type_unwanted(type_: Any) -> bool:
+    """Very rough attempt to detect if a type is unwanted as a Pydantic annotation.
+
+    At present, we exclude types which will coerce, or any generic type involving types
+    which will coerce."""
+    logger.debug("Is %s unwanted?")
+    if type_ in TYPES_THAT_PYDANTIC_WILL_COERCE_TO:
+        logger.debug("yes")
+        return True
+    logger.debug("Maybe. Subargs are %s", get_args(type_))
+    rv = any(field_type_unwanted(t) for t in get_args(type_))
+    logger.debug("Conclusion: %s %s unwanted", type_, "is" if rv else "is not")
+    return rv
+
+
+class PatchedBaseModel(PydanticBaseModel):
+    """A patched version of BaseModel that inspects fields after models are defined.
+
+    We complain loudly if we see an unwanted type.
+
+    Beware: ModelField.type_ is presumably private; this is likely to be very brittle.
+    """
+
+    @classmethod
+    def __init_subclass__(cls: Type[PydanticBaseModel], **kwargs: object):
+        for field in cls.__fields__.values():
+            # Note that field.type_ and field.outer_type are computed based on the
+            # annotation type, see pydantic.fields.ModelField._type_analysis
+            if field_type_unwanted(field.outer_type_):
+                # TODO: this only reports the first bad field. Can we find all bad ones
+                #  and report them all?
+                raise FieldHasUnwantedTypeException(
+                    f"{cls.__module__}.{cls.__qualname__} has field '{field.name}' "
+                    f"with unwanted type `{field.outer_type_}`"
+                )
+
+
+@contextmanager
+def monkeypatch_pydantic() -> Generator[None, None, None]:
+    """Patch pydantic with our snooping versions of BaseModel and the con* functions.
+
+    If the snooping functions see something they don't like, they'll raise a
+    ModelCheckingException instance.
+    """
+    with contextlib.ExitStack() as patches:
+        # Most Synapse code ought to import the patched objects directly from
+        # `pydantic`. But we also patch their containing modules `pydantic.main` and
+        # `pydantic.types` for completeness.
+        patch_basemodel1 = unittest.mock.patch(
+            "pydantic.BaseModel", new=PatchedBaseModel
+        )
+        patch_basemodel2 = unittest.mock.patch(
+            "pydantic.main.BaseModel", new=PatchedBaseModel
+        )
+        patches.enter_context(patch_basemodel1)
+        patches.enter_context(patch_basemodel2)
+        for factory in CONSTRAINED_TYPE_FACTORIES_WITH_STRICT_FLAG:
+            wrapper: Callable = make_wrapper(factory)
+            patch1 = unittest.mock.patch(f"pydantic.{factory.__name__}", new=wrapper)
+            patch2 = unittest.mock.patch(
+                f"pydantic.types.{factory.__name__}", new=wrapper
+            )
+            patches.enter_context(patch1)
+            patches.enter_context(patch2)
+        yield
+
+
+def format_model_checker_exception(e: ModelCheckerException) -> str:
+    """Work out which line of code caused e. Format the line in a human-friendly way."""
+    # TODO. FieldHasUnwantedTypeException gives better error messages. Can we ditch the
+    #   patches of constr() etc, and instead inspect fields to look for ConstrainedStr
+    #   with strict=False? There is some difficulty with the inheritance hierarchy
+    #   because StrictStr < ConstrainedStr < str.
+    if isinstance(e, FieldHasUnwantedTypeException):
+        return e.message
+    elif isinstance(e, MissingStrictInConstrainedTypeException):
+        frame_summary = traceback.extract_tb(e.__traceback__)[-2]
+        return (
+            f"Missing `strict=True` from {e.factory_name}() call \n"
+            + traceback.format_list([frame_summary])[0].lstrip()
+        )
+    else:
+        raise ValueError(f"Unknown exception {e}") from e
+
+
+def lint() -> int:
+    """Try to import all of Synapse and see if we spot any Pydantic type coercions.
+
+    Print any problems, then return a status code suitable for sys.exit."""
+    failures = do_lint()
+    if failures:
+        print(f"Found {len(failures)} problem(s)")
+    for failure in sorted(failures):
+        print(failure)
+    return os.EX_DATAERR if failures else os.EX_OK
+
+
+def do_lint() -> Set[str]:
+    """Try to import all of Synapse and see if we spot any Pydantic type coercions."""
+    failures = set()
+
+    with monkeypatch_pydantic():
+        logger.debug("Importing synapse")
+        try:
+            # TODO: make "synapse" an argument so we can target this script at
+            # a subpackage
+            module = importlib.import_module("synapse")
+        except ModelCheckerException as e:
+            logger.warning("Bad annotation found when importing synapse")
+            failures.add(format_model_checker_exception(e))
+            return failures
+
+        try:
+            logger.debug("Fetching subpackages")
+            module_infos = list(
+                pkgutil.walk_packages(module.__path__, f"{module.__name__}.")
+            )
+        except ModelCheckerException as e:
+            logger.warning("Bad annotation found when looking for modules to import")
+            failures.add(format_model_checker_exception(e))
+            return failures
+
+        for module_info in module_infos:
+            logger.debug("Importing %s", module_info.name)
+            try:
+                importlib.import_module(module_info.name)
+            except ModelCheckerException as e:
+                logger.warning(
+                    f"Bad annotation found when importing {module_info.name}"
+                )
+                failures.add(format_model_checker_exception(e))
+
+    return failures
+
+
+def run_test_snippet(source: str) -> None:
+    """Exec a snippet of source code in an isolated environment."""
+    # To emulate `source` being called at the top level of the module,
+    # the globals and locals we provide apparently have to be the same mapping.
+    #
+    # > Remember that at the module level, globals and locals are the same dictionary.
+    # > If exec gets two separate objects as globals and locals, the code will be
+    # > executed as if it were embedded in a class definition.
+    globals_: Dict[str, object]
+    locals_: Dict[str, object]
+    globals_ = locals_ = {}
+    exec(textwrap.dedent(source), globals_, locals_)
+
+
+class TestConstrainedTypesPatch(unittest.TestCase):
+    def test_expression_without_strict_raises(self) -> None:
+        with monkeypatch_pydantic(), self.assertRaises(ModelCheckerException):
+            run_test_snippet(
+                """
+                from pydantic import constr
+                constr()
+                """
+            )
+
+    def test_called_as_module_attribute_raises(self) -> None:
+        with monkeypatch_pydantic(), self.assertRaises(ModelCheckerException):
+            run_test_snippet(
+                """
+                import pydantic
+                pydantic.constr()
+                """
+            )
+
+    def test_wildcard_import_raises(self) -> None:
+        with monkeypatch_pydantic(), self.assertRaises(ModelCheckerException):
+            run_test_snippet(
+                """
+                from pydantic import *
+                constr()
+                """
+            )
+
+    def test_alternative_import_raises(self) -> None:
+        with monkeypatch_pydantic(), self.assertRaises(ModelCheckerException):
+            run_test_snippet(
+                """
+                from pydantic.types import constr
+                constr()
+                """
+            )
+
+    def test_alternative_import_attribute_raises(self) -> None:
+        with monkeypatch_pydantic(), self.assertRaises(ModelCheckerException):
+            run_test_snippet(
+                """
+                import pydantic.types
+                pydantic.types.constr()
+                """
+            )
+
+    def test_kwarg_but_no_strict_raises(self) -> None:
+        with monkeypatch_pydantic(), self.assertRaises(ModelCheckerException):
+            run_test_snippet(
+                """
+                from pydantic import constr
+                constr(min_length=10)
+                """
+            )
+
+    def test_kwarg_strict_False_raises(self) -> None:
+        with monkeypatch_pydantic(), self.assertRaises(ModelCheckerException):
+            run_test_snippet(
+                """
+                from pydantic import constr
+                constr(strict=False)
+                """
+            )
+
+    def test_kwarg_strict_True_doesnt_raise(self) -> None:
+        with monkeypatch_pydantic():
+            run_test_snippet(
+                """
+                from pydantic import constr
+                constr(strict=True)
+                """
+            )
+
+    def test_annotation_without_strict_raises(self) -> None:
+        with monkeypatch_pydantic(), self.assertRaises(ModelCheckerException):
+            run_test_snippet(
+                """
+                from pydantic import constr
+                x: constr()
+                """
+            )
+
+    def test_field_annotation_without_strict_raises(self) -> None:
+        with monkeypatch_pydantic(), self.assertRaises(ModelCheckerException):
+            run_test_snippet(
+                """
+                from pydantic import BaseModel, conint
+                class C:
+                    x: conint()
+                """
+            )
+
+
+class TestFieldTypeInspection(unittest.TestCase):
+    @parameterized.expand(
+        [
+            ("str",),
+            ("bytes"),
+            ("int",),
+            ("float",),
+            ("bool"),
+            ("Optional[str]",),
+            ("Union[None, str]",),
+            ("List[str]",),
+            ("List[List[str]]",),
+            ("Dict[StrictStr, str]",),
+            ("Dict[str, StrictStr]",),
+            ("TypedDict('D', x=int)",),
+        ]
+    )
+    def test_field_holding_unwanted_type_raises(self, annotation: str) -> None:
+        with monkeypatch_pydantic(), self.assertRaises(ModelCheckerException):
+            run_test_snippet(
+                f"""
+                from typing import *
+                from pydantic import *
+                class C(BaseModel):
+                    f: {annotation}
+                """
+            )
+
+    @parameterized.expand(
+        [
+            ("StrictStr",),
+            ("StrictBytes"),
+            ("StrictInt",),
+            ("StrictFloat",),
+            ("StrictBool"),
+            ("constr(strict=True, min_length=10)",),
+            ("Optional[StrictStr]",),
+            ("Union[None, StrictStr]",),
+            ("List[StrictStr]",),
+            ("List[List[StrictStr]]",),
+            ("Dict[StrictStr, StrictStr]",),
+            ("TypedDict('D', x=StrictInt)",),
+        ]
+    )
+    def test_field_holding_accepted_type_doesnt_raise(self, annotation: str) -> None:
+        with monkeypatch_pydantic():
+            run_test_snippet(
+                f"""
+                from typing import *
+                from pydantic import *
+                class C(BaseModel):
+                    f: {annotation}
+                """
+            )
+
+    def test_field_holding_str_raises_with_alternative_import(self) -> None:
+        with monkeypatch_pydantic(), self.assertRaises(ModelCheckerException):
+            run_test_snippet(
+                """
+                from pydantic.main import BaseModel
+                class C(BaseModel):
+                    f: str
+                """
+            )
+
+
+parser = argparse.ArgumentParser()
+parser.add_argument("mode", choices=["lint", "test"], default="lint", nargs="?")
+parser.add_argument("-v", "--verbose", action="store_true")
+
+
+if __name__ == "__main__":
+    args = parser.parse_args(sys.argv[1:])
+    logging.basicConfig(
+        format="%(asctime)s %(name)s:%(lineno)d %(levelname)s %(message)s",
+        level=logging.DEBUG if args.verbose else logging.INFO,
+    )
+    # suppress logs we don't care about
+    logging.getLogger("xmlschema").setLevel(logging.WARNING)
+    if args.mode == "lint":
+        sys.exit(lint())
+    elif args.mode == "test":
+        unittest.main(argv=sys.argv[:1])

scripts-dev/complement.sh

@@ -101,6 +101,7 @@ if [ -z "$skip_docker_build" ]; then
     echo_if_github "::group::Build Docker image: matrixdotorg/synapse"
     docker build -t matrixdotorg/synapse \
       --build-arg TEST_ONLY_SKIP_DEP_HASH_VERIFICATION \
+      --build-arg TEST_ONLY_IGNORE_POETRY_LOCKFILE \
       -f "docker/Dockerfile" .
     echo_if_github "::endgroup::"
 

scripts-dev/lint.sh

@@ -106,4 +106,5 @@ isort "${files[@]}"
 python3 -m black "${files[@]}"
 ./scripts-dev/config-lint.sh
 flake8 "${files[@]}"
+./scripts-dev/check_pydantic_models.py lint
 mypy