Merge branch 'release-v1.12.4' of github.com:matrix-org/synapse into anoa/temp_working_cache_config

* 'release-v1.12.4' of github.com:matrix-org/synapse: (123 commits)
  1.12.4
  formatting for the changelog
  1.12.4rc1
  1.12.4rc1
  Do not treat display names as globs for push rules. (#7271)
  Query missing cross-signing keys on local sig upload (#7289)
  Fix changelog file
  Support GET account_data requests on a worker (#7311)
  Revert "Query missing cross-signing keys on local sig upload"
  Always send the user updates to their own device list (#7160)
  Query missing cross-signing keys on local sig upload
  Only register devices edu handler on the master process (#7255)
  tweak changelog
  1.12.3
  Fix the debian build in a better way. (#7212)
  Fix changelog wording
  1.12.2
  Pin Pillow>=4.3.0,<7.1.0 to fix dep issue
  1.12.1
  Note where bugs were introduced
  ...

.buildkite/worker-blacklist

@@ -1,10 +1,43 @@
 # This file serves as a blacklist for SyTest tests that we expect will fail in
 # Synapse when run under worker mode. For more details, see sytest-blacklist.
 
+Message history can be paginated
+
 Can re-join room if re-invited
 
+/upgrade creates a new room
+
+The only membership state included in an initial sync is for all the senders in the timeline
+
+Local device key changes get to remote servers
+
+If remote user leaves room we no longer receive device updates
+
+Forgotten room messages cannot be paginated
+
+Inbound federation can get public room list
+
+Members from the gap are included in gappy incr LL sync
+
+Leaves are present in non-gapped incremental syncs
+
+Old leaves are present in gapped incremental syncs
+
+User sees updates to presence from other users in the incremental sync.
+
+Gapped incremental syncs include all state changes
+
+Old members are included in gappy incr LL sync if they start speaking
+
 # new failures as of https://github.com/matrix-org/sytest/pull/732
 Device list doesn't change if remote server is down
+Remote servers cannot set power levels in rooms without existing powerlevels
+Remote servers should reject attempts by non-creators to set the power levels
 
 # https://buildkite.com/matrix-dot-org/synapse/builds/6134#6f67bf47-e234-474d-80e8-c6e1868b15c5
 Server correctly handles incoming m.device_list_update
+
+# this fails reliably with a torture level of 100 due to https://github.com/matrix-org/synapse/issues/6536
+Outbound federation requests missing prev_events and then asks for /state_ids and resolves the state
+
+Can get rooms/{roomId}/members at a given point

.circleci/config.yml

@@ -1,36 +1,24 @@
-version: 2.1
+version: 2
 jobs:
   dockerhubuploadrelease:
-    docker:
-      - image: docker:git
+    machine: true
     steps:
       - checkout
-      - setup_remote_docker
-      - docker_prepare
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:${CIRCLE_TAG} -t matrixdotorg/synapse:${CIRCLE_TAG}-py3 .
       - run: docker login --username $DOCKER_HUB_USERNAME --password $DOCKER_HUB_PASSWORD
-      - docker_build:
-          tag: -t matrixdotorg/synapse:${CIRCLE_TAG}
-          platforms: linux/amd64
-      - docker_build:
-          tag: -t matrixdotorg/synapse:${CIRCLE_TAG}
-          platforms: linux/amd64,linux/arm/v7,linux/arm64
-
+      - run: docker push matrixdotorg/synapse:${CIRCLE_TAG}
+      - run: docker push matrixdotorg/synapse:${CIRCLE_TAG}-py3
   dockerhubuploadlatest:
-    docker:
-      - image: docker:git
+    machine: true
     steps:
       - checkout
-      - setup_remote_docker
-      - docker_prepare
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:latest -t matrixdotorg/synapse:latest-py3 .
       - run: docker login --username $DOCKER_HUB_USERNAME --password $DOCKER_HUB_PASSWORD
-      - docker_build:
-          tag: -t matrixdotorg/synapse:latest
-          platforms: linux/amd64
-      - docker_build:
-          tag: -t matrixdotorg/synapse:latest
-          platforms: linux/amd64,linux/arm/v7,linux/arm64
+      - run: docker push matrixdotorg/synapse:latest
+      - run: docker push matrixdotorg/synapse:latest-py3
 
 workflows:
+  version: 2
   build:
     jobs:
       - dockerhubuploadrelease:
@@ -43,33 +31,3 @@ workflows:
           filters:
             branches:
               only: master
-
-commands:
-  docker_prepare:
-    description: Downloads the buildx cli plugin and enables multiarch images
-    parameters:
-      buildx_version:
-        type: string
-        default: "v0.4.1"
-    steps:
-      - run: apk add --no-cache curl
-      - run: mkdir -vp ~/.docker/cli-plugins/ ~/dockercache
-      - run: curl --silent -L "https://github.com/docker/buildx/releases/download/<< parameters.buildx_version >>/buildx-<< parameters.buildx_version >>.linux-amd64" > ~/.docker/cli-plugins/docker-buildx
-      - run: chmod a+x ~/.docker/cli-plugins/docker-buildx
-      # install qemu links in /proc/sys/fs/binfmt_misc on the docker instance running the circleci job
-      - run: docker run --rm --privileged multiarch/qemu-user-static --reset -p yes
-      # create a context named `builder` for the builds
-      - run: docker context create builder
-      # create a buildx builder using the new context, and set it as the default
-      - run: docker buildx create builder --use
-
-  docker_build:
-    description: Builds and pushed images to dockerhub using buildx
-    parameters:
-      platforms:
-        type: string
-        default: linux/amd64
-      tag:
-        type: string
-    steps:
-      - run: docker buildx build -f docker/Dockerfile --push --platform << parameters.platforms >> --label gitsha1=${CIRCLE_SHA1} << parameters.tag >> --progress=plain .

.github/ISSUE_TEMPLATE.md

@@ -1,5 +0,0 @@
-**If you are looking for support** please ask in **#synapse:matrix.org**
-(using a matrix.org account if necessary). We do not use GitHub issues for
-support.
-
-**If you want to report a security issue** please see https://matrix.org/security-disclosure-policy/

.github/ISSUE_TEMPLATE/BUG_REPORT.md

@@ -6,11 +6,9 @@ about: Create a report to help us improve
 
 <!--
 
-**THIS IS NOT A SUPPORT CHANNEL!**
-**IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**,
-please ask in **#synapse:matrix.org** (using a matrix.org account if necessary)
+**IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**:
+You will likely get better support more quickly if you ask in ** #synapse:matrix.org ** ;)
 
-If you want to report a security issue, please see https://matrix.org/security-disclosure-policy/
 
 This is a bug report template. By following the instructions below and
 filling out the sections with your information, you will help the us to get all

.gitignore

@@ -21,7 +21,6 @@ _trial_temp*/
 /.python-version
 /*.signing.key
 /env/
-/.venv*/
 /homeserver*.yaml
 /logs
 /media_store/

CONTRIBUTING.md

@@ -1,72 +1,80 @@
-# Contributing code to Synapse
+# Contributing code to Matrix
 
-Everyone is welcome to contribute code to [matrix.org
-projects](https://github.com/matrix-org), provided that they are willing to
-license their contributions under the same license as the project itself. We
-follow a simple 'inbound=outbound' model for contributions: the act of
-submitting an 'inbound' contribution means that the contributor agrees to
-license the code under the same terms as the project's overall 'outbound'
-license - in our case, this is almost always Apache Software License v2 (see
-[LICENSE](LICENSE)).
+Everyone is welcome to contribute code to Matrix
+(https://github.com/matrix-org), provided that they are willing to license
+their contributions under the same license as the project itself. We follow a
+simple 'inbound=outbound' model for contributions: the act of submitting an
+'inbound' contribution means that the contributor agrees to license the code
+under the same terms as the project's overall 'outbound' license - in our
+case, this is almost always Apache Software License v2 (see [LICENSE](LICENSE)).
 
 ## How to contribute
 
-The preferred and easiest way to contribute changes is to fork the relevant
-project on github, and then [create a pull request](
-https://help.github.com/articles/using-pull-requests/) to ask us to pull your
-changes into our repo.
+The preferred and easiest way to contribute changes to Matrix is to fork the
+relevant project on github, and then [create a pull request](
+https://help.github.com/articles/using-pull-requests/) to ask us to pull
+your changes into our repo.
 
-Some other points to follow:
+**The single biggest thing you need to know is: please base your changes on
+the develop branch - *not* master.**
 
- * Please base your changes on the `develop` branch.
+We use the master branch to track the most recent release, so that folks who
+blindly clone the repo and automatically check out master get something that
+works. Develop is the unstable branch where all the development actually
+happens: the workflow is that contributors should fork the develop branch to
+make a 'feature' branch for a particular contribution, and then make a pull
+request to merge this back into the matrix.org 'official' develop branch. We
+use github's pull request workflow to review the contribution, and either ask
+you to make any refinements needed or merge it and make them ourselves. The
+changes will then land on master when we next do a release.
 
- * Please follow the [code style requirements](#code-style).
+We use [Buildkite](https://buildkite.com/matrix-dot-org/synapse) for continuous
+integration. If your change breaks the build, this will be shown in GitHub, so
+please keep an eye on the pull request for feedback.
 
- * Please include a [changelog entry](#changelog) with each PR.
+To run unit tests in a local development environment, you can use:
 
- * Please [sign off](#sign-off) your contribution.
+- ``tox -e py35`` (requires tox to be installed by ``pip install tox``)
+  for SQLite-backed Synapse on Python 3.5.
+- ``tox -e py36`` for SQLite-backed Synapse on Python 3.6.
+- ``tox -e py36-postgres`` for PostgreSQL-backed Synapse on Python 3.6
+  (requires a running local PostgreSQL with access to create databases).
+- ``./test_postgresql.sh`` for PostgreSQL-backed Synapse on Python 3.5
+  (requires Docker). Entirely self-contained, recommended if you don't want to
+  set up PostgreSQL yourself.
 
- * Please keep an eye on the pull request for feedback from the [continuous
-   integration system](#continuous-integration-and-testing) and try to fix any
-   errors that come up.
-
- * If you need to [update your PR](#updating-your-pull-request), just add new
-   commits to your branch rather than rebasing.
+Docker images are available for running the integration tests (SyTest) locally,
+see the [documentation in the SyTest repo](
+https://github.com/matrix-org/sytest/blob/develop/docker/README.md) for more
+information.
 
 ## Code style
 
-Synapse's code style is documented [here](docs/code_style.md). Please follow
-it, including the conventions for the [sample configuration
-file](docs/code_style.md#configuration-file-format).
+All Matrix projects have a well-defined code-style - and sometimes we've even
+got as far as documenting it... For instance, synapse's code style doc lives
+[here](docs/code_style.md).
 
-Many of the conventions are enforced by scripts which are run as part of the
-[continuous integration system](#continuous-integration-and-testing). To help
-check if you have followed the code style, you can run `scripts-dev/lint.sh`
-locally. You'll need python 3.6 or later, and to install a number of tools:
+To facilitate meeting these criteria you can run `scripts-dev/lint.sh`
+locally. Since this runs the tools listed in the above document, you'll need
+python 3.6 and to install each tool:
 
 ```
 # Install the dependencies
-pip install -e ".[lint]"
+pip install -U black flake8 flake8-comprehensions isort
 
 # Run the linter script
 ./scripts-dev/lint.sh
 ```
 
 **Note that the script does not just test/check, but also reformats code, so you
-may wish to ensure any new code is committed first**.
-
-By default, this script checks all files and can take some time; if you alter
-only certain files, you might wish to specify paths as arguments to reduce the
-run-time:
+may wish to ensure any new code is committed first**. By default this script
+checks all files and can take some time; if you alter only certain files, you
+might wish to specify paths as arguments to reduce the run-time:
 
 ```
 ./scripts-dev/lint.sh path/to/file1.py path/to/file2.py path/to/folder
 ```
 
-You can also provided the `-d` option, which will lint the files that have been
-changed since the last git commit. This will often be significantly faster than
-linting the whole codebase.
-
 Before pushing new changes, ensure they don't produce linting errors. Commit any
 files that were corrected.
 
@@ -74,6 +82,7 @@ Please ensure your changes match the cosmetic style of the existing project,
 and **never** mix cosmetic and functional changes in the same commit, as it
 makes it horribly hard to review otherwise.
 
+
 ## Changelog
 
 All changes, even minor ones, need a corresponding changelog / newsfragment
@@ -89,55 +98,24 @@ in the format of `PRnumber.type`. The type can be one of the following:
 * `removal` (also used for deprecations)
 * `misc` (for internal-only changes)
 
-This file will become part of our [changelog](
-https://github.com/matrix-org/synapse/blob/master/CHANGES.md) at the next
-release, so the content of the file should be a short description of your
-change in the same style as the rest of the changelog. The file can contain Markdown
-formatting, and should end with a full stop (.) or an exclamation mark (!) for
-consistency.
+The content of the file is your changelog entry, which should be a short
+description of your change in the same style as the rest of our [changelog](
+https://github.com/matrix-org/synapse/blob/master/CHANGES.md). The file can
+contain Markdown formatting, and should end with a full stop (.) or an
+exclamation mark (!) for consistency.
 
 Adding credits to the changelog is encouraged, we value your
 contributions and would like to have you shouted out in the release notes!
 
 For example, a fix in PR #1234 would have its changelog entry in
-`changelog.d/1234.bugfix`, and contain content like:
+`changelog.d/1234.bugfix`, and contain content like "The security levels of
+Florbs are now validated when received over federation. Contributed by Jane
+Matrix.".
 
-> The security levels of Florbs are now validated when received
-> via the `/federation/florb` endpoint. Contributed by Jane Matrix.
-
-If there are multiple pull requests involved in a single bugfix/feature/etc,
-then the content for each `changelog.d` file should be the same. Towncrier will
-merge the matching files together into a single changelog entry when we come to
-release.
-
-### How do I know what to call the changelog file before I create the PR?
-
-Obviously, you don't know if you should call your newsfile
-`1234.bugfix` or `5678.bugfix` until you create the PR, which leads to a
-chicken-and-egg problem.
-
-There are two options for solving this:
-
- 1. Open the PR without a changelog file, see what number you got, and *then*
-    add the changelog file to your branch (see [Updating your pull
-    request](#updating-your-pull-request)), or:
-
- 1. Look at the [list of all
-    issues/PRs](https://github.com/matrix-org/synapse/issues?q=), add one to the
-    highest number you see, and quickly open the PR before somebody else claims
-    your number.
-
-    [This
-    script](https://github.com/richvdh/scripts/blob/master/next_github_number.sh)
-    might be helpful if you find yourself doing this a lot.
-
-Sorry, we know it's a bit fiddly, but it's *really* helpful for us when we come
-to put together a release!
-
-### Debian changelog
+## Debian changelog
 
 Changes which affect the debian packaging files (in `debian`) are an
-exception to the rule that all changes require a `changelog.d` file.
+exception.
 
 In this case, you will need to add an entry to the debian changelog for the
 next release. For this, run the following command:
@@ -222,45 +200,19 @@ Git allows you to add this signoff automatically when using the `-s`
 flag to `git commit`, which uses the name and email set in your
 `user.name` and `user.email` git configs.
 
-## Continuous integration and testing
+## Merge Strategy
 
-[Buildkite](https://buildkite.com/matrix-dot-org/synapse) will automatically
-run a series of checks and tests against any PR which is opened against the
-project; if your change breaks the build, this will be shown in GitHub, with
-links to the build results. If your build fails, please try to fix the errors
-and update your branch.
+We use the commit history of develop/master extensively to identify
+when regressions were introduced and what changes have been made.
 
-To run unit tests in a local development environment, you can use:
+We aim to have a clean merge history, which means we normally squash-merge
+changes into develop. For small changes this means there is no need to rebase
+to clean up your PR before merging. Larger changes with an organised set of
+commits may be merged as-is, if the history is judged to be useful.
 
-- ``tox -e py35`` (requires tox to be installed by ``pip install tox``)
-  for SQLite-backed Synapse on Python 3.5.
-- ``tox -e py36`` for SQLite-backed Synapse on Python 3.6.
-- ``tox -e py36-postgres`` for PostgreSQL-backed Synapse on Python 3.6
-  (requires a running local PostgreSQL with access to create databases).
-- ``./test_postgresql.sh`` for PostgreSQL-backed Synapse on Python 3.5
-  (requires Docker). Entirely self-contained, recommended if you don't want to
-  set up PostgreSQL yourself.
-
-Docker images are available for running the integration tests (SyTest) locally,
-see the [documentation in the SyTest repo](
-https://github.com/matrix-org/sytest/blob/develop/docker/README.md) for more
-information.
-
-## Updating your pull request
-
-If you decide to make changes to your pull request - perhaps to address issues
-raised in a review, or to fix problems highlighted by [continuous
-integration](#continuous-integration-and-testing) - just add new commits to your
-branch, and push to GitHub. The pull request will automatically be updated.
-
-Please **avoid** rebasing your branch, especially once the PR has been
-reviewed: doing so makes it very difficult for a reviewer to see what has
-changed since a previous review.
-
-## Notes for maintainers on merging PRs etc
-
-There are some notes for those with commit access to the project on how we
-manage git [here](docs/dev/git.md).
+This use of squash-merging will mean PRs built on each other will be hard to 
+merge. We suggest avoiding these where possible, and if required, ensuring
+each PR has a tidy set of commits to ease merging.
 
 ## Conclusion
 

INSTALL.md

@@ -1,17 +1,15 @@
 - [Choosing your server name](#choosing-your-server-name)
-- [Picking a database engine](#picking-a-database-engine)
 - [Installing Synapse](#installing-synapse)
   - [Installing from source](#installing-from-source)
     - [Platform-Specific Instructions](#platform-specific-instructions)
+    - [Troubleshooting Installation](#troubleshooting-installation)
   - [Prebuilt packages](#prebuilt-packages)
 - [Setting up Synapse](#setting-up-synapse)
   - [TLS certificates](#tls-certificates)
-  - [Client Well-Known URI](#client-well-known-uri)
   - [Email](#email)
   - [Registering a user](#registering-a-user)
   - [Setting up a TURN server](#setting-up-a-turn-server)
   - [URL previews](#url-previews)
-- [Troubleshooting Installation](#troubleshooting-installation)
 
 # Choosing your server name
 
@@ -29,25 +27,6 @@ that your email address is probably `user@example.com` rather than
 `user@email.example.com`) - but doing so may require more advanced setup: see
 [Setting up Federation](docs/federate.md).
 
-# Picking a database engine
-
-Synapse offers two database engines:
- * [PostgreSQL](https://www.postgresql.org)
- * [SQLite](https://sqlite.org/)
-
-Almost all installations should opt to use PostgreSQL. Advantages include:
-
-* significant performance improvements due to the superior threading and
-  caching model, smarter query optimiser
-* allowing the DB to be run on separate hardware
-
-For information on how to install and use PostgreSQL, please see
-[docs/postgres.md](docs/postgres.md)
-
-By default Synapse uses SQLite and in doing so trades performance for convenience.
-SQLite is only recommended in Synapse for testing purposes or for servers with
-light workloads.
-
 # Installing Synapse
 
 ## Installing from source
@@ -57,7 +36,7 @@ light workloads.
 System requirements:
 
 - POSIX-compliant system (tested on Linux & OS X)
-- Python 3.5.2 or later, up to Python 3.8.
+- Python 3.5, 3.6, 3.7 or 3.8.
 - At least 1GB of free RAM if you want to join large public rooms like #matrix:matrix.org
 
 Synapse is written in Python but some of the libraries it uses are written in
@@ -91,7 +70,7 @@ pip install -U matrix-synapse
 ```
 
 Before you can start Synapse, you will need to generate a configuration
-file. To do this, run (in your virtualenv, as before):
+file. To do this, run (in your virtualenv, as before)::
 
 ```
 cd ~/synapse
@@ -105,24 +84,22 @@ python -m synapse.app.homeserver \
 ... substituting an appropriate value for `--server-name`.
 
 This command will generate you a config file that you can then customise, but it will
-also generate a set of keys for you. These keys will allow your homeserver to
-identify itself to other homeserver, so don't lose or delete them. It would be
+also generate a set of keys for you. These keys will allow your Home Server to
+identify itself to other Home Servers, so don't lose or delete them. It would be
 wise to back them up somewhere safe. (If, for whatever reason, you do need to
-change your homeserver's keys, you may find that other homeserver have the
+change your Home Server's keys, you may find that other Home Servers have the
 old key cached. If you update the signing key, you should change the name of the
 key in the `<server name>.signing.key` file (the second word) to something
 different. See the
 [spec](https://matrix.org/docs/spec/server_server/latest.html#retrieving-server-keys)
-for more information on key management).
+for more information on key management.)
 
 To actually run your new homeserver, pick a working directory for Synapse to
-run (e.g. `~/synapse`), and:
+run (e.g. `~/synapse`), and::
 
-```
-cd ~/synapse
-source env/bin/activate
-synctl start
-```
+    cd ~/synapse
+    source env/bin/activate
+    synctl start
 
 ### Platform-Specific Instructions
 
@@ -133,7 +110,7 @@ Installing prerequisites on Ubuntu or Debian:
 ```
 sudo apt-get install build-essential python3-dev libffi-dev \
                      python3-pip python3-setuptools sqlite3 \
-                     libssl-dev virtualenv libjpeg-dev libxslt1-dev
+                     libssl-dev python3-virtualenv libjpeg-dev libxslt1-dev
 ```
 
 #### ArchLinux
@@ -201,41 +178,35 @@ sudo zypper in python-pip python-setuptools sqlite3 python-virtualenv \
 
 #### OpenBSD
 
-A port of Synapse is available under `net/synapse`. The filesystem
-underlying the homeserver directory (defaults to `/var/synapse`) has to be
-mounted with `wxallowed` (cf. `mount(8)`), so creating a separate filesystem
-and mounting it to `/var/synapse` should be taken into consideration.
-
-To be able to build Synapse's dependency on python the `WRKOBJDIR`
-(cf. `bsd.port.mk(5)`) for building python, too, needs to be on a filesystem
-mounted with `wxallowed` (cf. `mount(8)`).
-
-Creating a `WRKOBJDIR` for building python under `/usr/local` (which on a
-default OpenBSD installation is mounted with `wxallowed`):
+Installing prerequisites on OpenBSD:
 
 ```
-doas mkdir /usr/local/pobj_wxallowed
+doas pkg_add python libffi py-pip py-setuptools sqlite3 py-virtualenv \
+              libxslt jpeg
 ```
 
-Assuming `PORTS_PRIVSEP=Yes` (cf. `bsd.port.mk(5)`) and `SUDO=doas` are
-configured in `/etc/mk.conf`:
+There is currently no port for OpenBSD. Additionally, OpenBSD's security
+settings require a slightly more difficult installation process.
 
-```
-doas chown _pbuild:_pbuild /usr/local/pobj_wxallowed
-```
+XXX: I suspect this is out of date.
 
-Setting the `WRKOBJDIR` for building python:
+1. Create a new directory in `/usr/local` called `_synapse`. Also, create a
+   new user called `_synapse` and set that directory as the new user's home.
+   This is required because, by default, OpenBSD only allows binaries which need
+   write and execute permissions on the same memory space to be run from
+   `/usr/local`.
+2. `su` to the new `_synapse` user and change to their home directory.
+3. Create a new virtualenv: `virtualenv -p python2.7 ~/.synapse`
+4. Source the virtualenv configuration located at
+   `/usr/local/_synapse/.synapse/bin/activate`. This is done in `ksh` by
+   using the `.` command, rather than `bash`'s `source`.
+5. Optionally, use `pip` to install `lxml`, which Synapse needs to parse
+   webpages for their titles.
+6. Use `pip` to install this repository: `pip install matrix-synapse`
+7. Optionally, change `_synapse`'s shell to `/bin/false` to reduce the
+   chance of a compromised Synapse server being used to take over your box.
 
-```
-echo WRKOBJDIR_lang/python/3.7=/usr/local/pobj_wxallowed  \\nWRKOBJDIR_lang/python/2.7=/usr/local/pobj_wxallowed >> /etc/mk.conf
-```
-
-Building Synapse:
-
-```
-cd /usr/ports/net/synapse
-make install
-```
+After this, you may proceed with the rest of the install directions.
 
 #### Windows
 
@@ -246,6 +217,45 @@ be found at https://docs.microsoft.com/en-us/windows/wsl/install-win10 for
 Windows 10 and https://docs.microsoft.com/en-us/windows/wsl/install-on-server
 for Windows Server.
 
+### Troubleshooting Installation
+
+XXX a bunch of this is no longer relevant.
+
+Synapse requires pip 8 or later, so if your OS provides too old a version you
+may need to manually upgrade it::
+
+    sudo pip install --upgrade pip
+
+Installing may fail with `Could not find any downloads that satisfy the requirement pymacaroons-pynacl (from matrix-synapse==0.12.0)`.
+You can fix this by manually upgrading pip and virtualenv::
+
+    sudo pip install --upgrade virtualenv
+
+You can next rerun `virtualenv -p python3 synapse` to update the virtual env.
+
+Installing may fail during installing virtualenv with `InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning.`
+You can fix this  by manually installing ndg-httpsclient::
+
+    pip install --upgrade ndg-httpsclient
+
+Installing may fail with `mock requires setuptools>=17.1. Aborting installation`.
+You can fix this by upgrading setuptools::
+
+    pip install --upgrade setuptools
+
+If pip crashes mid-installation for reason (e.g. lost terminal), pip may
+refuse to run until you remove the temporary installation directory it
+created. To reset the installation::
+
+    rm -rf /tmp/pip_install_matrix
+
+pip seems to leak *lots* of memory during installation.  For instance, a Linux
+host with 512MB of RAM may run out of memory whilst installing Twisted.  If this
+happens, you will have to individually install the dependencies which are
+failing, e.g.::
+
+    pip install twisted
+
 ## Prebuilt packages
 
 As an alternative to installing from source, prebuilt packages are available
@@ -255,9 +265,9 @@ for a number of platforms.
 
 There is an offical synapse image available at
 https://hub.docker.com/r/matrixdotorg/synapse which can be used with
-the docker-compose file available at [contrib/docker](contrib/docker). Further
-information on this including configuration options is available in the README
-on hub.docker.com.
+the docker-compose file available at [contrib/docker](contrib/docker). Further information on
+this including configuration options is available in the README on
+hub.docker.com.
 
 Alternatively, Andreas Peters (previously Silvio Fricke) has contributed a
 Dockerfile to automate a synapse server in a single Docker image, at
@@ -265,8 +275,7 @@ https://hub.docker.com/r/avhost/docker-matrix/tags/
 
 Slavi Pantaleev has created an Ansible playbook,
 which installs the offical Docker image of Matrix Synapse
-along with many other Matrix-related services (Postgres database, Element, coturn,
-ma1sd, SSL support, etc.).
+along with many other Matrix-related services (Postgres database, riot-web, coturn, mxisd, SSL support, etc.).
 For more details, see
 https://github.com/spantaleev/matrix-docker-ansible-deploy
 
@@ -299,27 +308,22 @@ The fingerprint of the repository signing key (as shown by `gpg
 /usr/share/keyrings/matrix-org-archive-keyring.gpg`) is
 `AAF9AE843A7584B5A3E4CD2BCF45A512DE2DA058`.
 
-#### Downstream Debian packages
+#### Downstream Debian/Ubuntu packages
 
-We do not recommend using the packages from the default Debian `buster`
-repository at this time, as they are old and suffer from known security
-vulnerabilities. You can install the latest version of Synapse from
-[our repository](#matrixorg-packages) or from `buster-backports`. Please
-see the [Debian documentation](https://backports.debian.org/Instructions/)
-for information on how to use backports.
-
-If you are using Debian `sid` or testing, Synapse is available in the default
-repositories and it should be possible to install it simply with:
+For `buster` and `sid`, Synapse is available in the Debian repositories and
+it should be possible to install it with simply:
 
 ```
-sudo apt install matrix-synapse
+    sudo apt install matrix-synapse
 ```
 
-#### Downstream Ubuntu packages
+There is also a version of `matrix-synapse` in `stretch-backports`. Please see
+the [Debian documentation on
+backports](https://backports.debian.org/Instructions/) for information on how
+to use them.
 
-We do not recommend using the packages in the default Ubuntu repository
-at this time, as they are old and suffer from known security vulnerabilities.
-The latest version of Synapse can be installed from [our repository](#matrixorg-packages).
+We do not recommend using the packages in downstream Ubuntu at this time, as
+they are old and suffer from known security vulnerabilities.
 
 ### Fedora
 
@@ -371,30 +375,16 @@ sudo pip install py-bcrypt
 
 Synapse can be found in the void repositories as 'synapse':
 
-```
-xbps-install -Su
-xbps-install -S synapse
-```
+    xbps-install -Su
+    xbps-install -S synapse
 
 ### FreeBSD
 
 Synapse can be installed via FreeBSD Ports or Packages contributed by Brendan Molloy from:
 
  - Ports: `cd /usr/ports/net-im/py-matrix-synapse && make install clean`
- - Packages: `pkg install py37-matrix-synapse`
+ - Packages: `pkg install py27-matrix-synapse`
 
-### OpenBSD
-
-As of OpenBSD 6.7 Synapse is available as a pre-compiled binary. The filesystem
-underlying the homeserver directory (defaults to `/var/synapse`) has to be
-mounted with `wxallowed` (cf. `mount(8)`), so creating a separate filesystem
-and mounting it to `/var/synapse` should be taken into consideration.
-
-Installing Synapse:
-
-```
-doas pkg_add synapse
-```
 
 ### NixOS
 
@@ -430,76 +420,23 @@ so, you will need to edit `homeserver.yaml`, as follows:
       resources:
         - names: [client, federation]
   ```
-
 * You will also need to uncomment the `tls_certificate_path` and
-  `tls_private_key_path` lines under the `TLS` section. You will need to manage
-  provisioning of these certificates yourself — Synapse had built-in ACME
-  support, but the ACMEv1 protocol Synapse implements is deprecated, not
-  allowed by LetsEncrypt for new sites, and will break for existing sites in
-  late 2020. See [ACME.md](docs/ACME.md).
-
+  `tls_private_key_path` lines under the `TLS` section. You can either
+  point these settings at an existing certificate and key, or you can
+  enable Synapse's built-in ACME (Let's Encrypt) support. Instructions
+  for having Synapse automatically provision and renew federation
+  certificates through ACME can be found at [ACME.md](docs/ACME.md).
+  Note that, as pointed out in that document, this feature will not
+  work with installs set up after November 2019. 
+  
   If you are using your own certificate, be sure to use a `.pem` file that
   includes the full certificate chain including any intermediate certificates
   (for instance, if using certbot, use `fullchain.pem` as your certificate, not
   `cert.pem`).
 
 For a more detailed guide to configuring your server for federation, see
-[federate.md](docs/federate.md).
+[federate.md](docs/federate.md)
 
-## Client Well-Known URI
-
-Setting up the client Well-Known URI is optional but if you set it up, it will
-allow users to enter their full username (e.g. `@user:<server_name>`) into clients
-which support well-known lookup to automatically configure the homeserver and
-identity server URLs. This is useful so that users don't have to memorize or think
-about the actual homeserver URL you are using.
-
-The URL `https://<server_name>/.well-known/matrix/client` should return JSON in
-the following format.
-
-```
-{
-  "m.homeserver": {
-    "base_url": "https://<matrix.example.com>"
-  }
-}
-```
-
-It can optionally contain identity server information as well.
-
-```
-{
-  "m.homeserver": {
-    "base_url": "https://<matrix.example.com>"
-  },
-  "m.identity_server": {
-    "base_url": "https://<identity.example.com>"
-  }
-}
-```
-
-To work in browser based clients, the file must be served with the appropriate
-Cross-Origin Resource Sharing (CORS) headers. A recommended value would be
-`Access-Control-Allow-Origin: *` which would allow all browser based clients to
-view it.
-
-In nginx this would be something like:
-```
-location /.well-known/matrix/client {
-    return 200 '{"m.homeserver": {"base_url": "https://<matrix.example.com>"}}';
-    add_header Content-Type application/json;
-    add_header Access-Control-Allow-Origin *;
-}
-```
-
-You should also ensure the `public_baseurl` option in `homeserver.yaml` is set
-correctly. `public_baseurl` should be set to the URL that clients will use to
-connect to your server. This is the same URL you put for the `m.homeserver`
-`base_url` above.
-
-```
-public_baseurl: "https://<matrix.example.com>"
-```
 
 ## Email
 
@@ -518,7 +455,7 @@ email will be disabled.
 
 ## Registering a user
 
-The easiest way to create a new user is to do so from a client like [Element](https://element.io/).
+The easiest way to create a new user is to do so from a client like [Riot](https://riot.im).
 
 Alternatively you can do so from the command line if you have installed via pip.
 
@@ -545,7 +482,7 @@ on your server even if `enable_registration` is `false`.
 ## Setting up a TURN server
 
 For reliable VoIP calls to be routed via this homeserver, you MUST configure
-a TURN server. See [docs/turn-howto.md](docs/turn-howto.md) for details.
+a TURN server.  See [docs/turn-howto.md](docs/turn-howto.md) for details.
 
 ## URL previews
 
@@ -554,24 +491,10 @@ turn it on you must enable the `url_preview_enabled: True` config parameter
 and explicitly specify the IP ranges that Synapse is not allowed to spider for
 previewing in the `url_preview_ip_range_blacklist` configuration parameter.
 This is critical from a security perspective to stop arbitrary Matrix users
-spidering 'internal' URLs on your network. At the very least we recommend that
+spidering 'internal' URLs on your network.  At the very least we recommend that
 your loopback and RFC1918 IP addresses are blacklisted.
 
-This also requires the optional `lxml` and `netaddr` python dependencies to be
-installed. This in turn requires the `libxml2` library to be available - on
+This also requires the optional lxml and netaddr python dependencies to be
+installed.  This in turn requires the libxml2 library to be available - on
 Debian/Ubuntu this means `apt-get install libxml2-dev`, or equivalent for
 your OS.
-
-# Troubleshooting Installation
-
-`pip` seems to leak *lots* of memory during installation. For instance, a Linux
-host with 512MB of RAM may run out of memory whilst installing Twisted. If this
-happens, you will have to individually install the dependencies which are
-failing, e.g.:
-
-```
-pip install twisted
-```
-
-If you have any other problems, feel free to ask in
-[#synapse:matrix.org](https://matrix.to/#/#synapse:matrix.org).

MANIFEST.in

@@ -30,24 +30,23 @@ recursive-include synapse/static *.gif
 recursive-include synapse/static *.html
 recursive-include synapse/static *.js
 
-exclude .codecov.yml
-exclude .coveragerc
-exclude .dockerignore
-exclude .editorconfig
 exclude Dockerfile
-exclude mypy.ini
-exclude sytest-blacklist
+exclude .dockerignore
 exclude test_postgresql.sh
+exclude .editorconfig
+exclude sytest-blacklist
 
 include pyproject.toml
 recursive-include changelog.d *
 
 prune .buildkite
 prune .circleci
+prune .codecov.yml
+prune .coveragerc
 prune .github
-prune contrib
 prune debian
 prune demo/etc
 prune docker
+prune mypy.ini
 prune snap
 prune stubs

README.rst

@@ -1,7 +1,3 @@
-=========================================================
-Synapse |support| |development| |license| |pypi| |python|
-=========================================================
-
 .. contents::
 
 Introduction
@@ -41,7 +37,7 @@ which handle:
 - Eventually-consistent cryptographically secure synchronisation of room
   state across a global open network of federated servers and services
 - Sending and receiving extensible messages in a room with (optional)
-  end-to-end encryption
+  end-to-end encryption[1]
 - Inviting, joining, leaving, kicking, banning room members
 - Managing user accounts (registration, login, logout)
 - Using 3rd Party IDs (3PIDs) such as email addresses, phone numbers,
@@ -78,15 +74,7 @@ at the `Matrix spec <https://matrix.org/docs/spec>`_, and experiment with the
 
 Thanks for using Matrix!
 
-Support
-=======
-
-For support installing or managing Synapse, please join |room|_ (from a matrix.org
-account if necessary) and ask questions there. We do not use GitHub issues for
-support requests, only for bug reports and feature requests.
-
-.. |room| replace:: ``#synapse:matrix.org``
-.. _room: https://matrix.to/#/#synapse:matrix.org
+[1] End-to-end encryption is currently in beta: `blog post <https://matrix.org/blog/2016/11/21/matrixs-olm-end-to-end-encryption-security-assessment-released-and-implemented-cross-platform-on-riot-at-last>`_.
 
 
 Synapse Installation
@@ -108,11 +96,12 @@ Unless you are running a test instance of Synapse on your local machine, in
 general, you will need to enable TLS support before you can successfully
 connect from a client: see `<INSTALL.md#tls-certificates>`_.
 
-An easy way to get started is to login or register via Element at
-https://app.element.io/#/login or https://app.element.io/#/register respectively.
+An easy way to get started is to login or register via Riot at
+https://riot.im/app/#/login or https://riot.im/app/#/register respectively.
 You will need to change the server you are logging into from ``matrix.org``
 and instead specify a Homeserver URL of ``https://<server_name>:8448``
 (or just ``https://<server_name>`` if you are using a reverse proxy).
+(Leave the identity server as the default - see `Identity servers`_.)
 If you prefer to use another client, refer to our
 `client breakdown <https://matrix.org/docs/projects/clients-matrix>`_.
 
@@ -129,7 +118,7 @@ it, specify ``enable_registration: true`` in ``homeserver.yaml``. (It is then
 recommended to also set up CAPTCHA - see `<docs/CAPTCHA_SETUP.md>`_.)
 
 Once ``enable_registration`` is set to ``true``, it is possible to register a
-user via a Matrix client.
+user via `riot.im <https://riot.im/app/#/register>`_ or other Matrix clients.
 
 Your new user name will be formed partly from the ``server_name``, and partly
 from a localpart you specify when you create the account. Your name will take
@@ -175,6 +164,30 @@ versions of synapse.
 
 .. _UPGRADE.rst: UPGRADE.rst
 
+
+Using PostgreSQL
+================
+
+Synapse offers two database engines:
+ * `SQLite <https://sqlite.org/>`_
+ * `PostgreSQL <https://www.postgresql.org>`_
+
+By default Synapse uses SQLite in and doing so trades performance for convenience.
+SQLite is only recommended in Synapse for testing purposes or for servers with
+light workloads.
+
+Almost all installations should opt to use PostreSQL. Advantages include:
+
+* significant performance improvements due to the superior threading and
+  caching model, smarter query optimiser
+* allowing the DB to be run on separate hardware
+* allowing basic active/backup high-availability with a "hot spare" synapse
+  pointing at the same DB master, as well as enabling DB replication in
+  synapse itself.
+
+For information on how to install and use PostgreSQL, please see
+`docs/postgres.md <docs/postgres.md>`_.
+
 .. _reverse-proxy:
 
 Using a reverse proxy with Synapse
@@ -183,7 +196,7 @@ Using a reverse proxy with Synapse
 It is recommended to put a reverse proxy such as
 `nginx <https://nginx.org/en/docs/http/ngx_http_proxy_module.html>`_,
 `Apache <https://httpd.apache.org/docs/current/mod/mod_proxy_http.html>`_,
-`Caddy <https://caddyserver.com/docs/quick-starts/reverse-proxy>`_ or
+`Caddy <https://caddyserver.com/docs/proxy>`_ or
 `HAProxy <https://www.haproxy.org/>`_ in front of Synapse. One advantage of
 doing so is that it means that you can expose the default https port (443) to
 Matrix clients without needing to run Synapse with root privileges.
@@ -223,9 +236,10 @@ email address.
 Password reset
 ==============
 
-Users can reset their password through their client. Alternatively, a server admin
-can reset a users password using the `admin API <docs/admin_api/user_admin_api.rst#reset-password>`_
-or by directly editing the database as shown below.
+If a user has registered an email address to their account using an identity
+server, they can request a password-reset token via clients such as Riot.
+
+A manual password reset can be done via direct database access as follows.
 
 First calculate the hash of the new password::
 
@@ -234,7 +248,7 @@ First calculate the hash of the new password::
     Confirm password:
     $2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
 
-Then update the ``users`` table in the database::
+Then update the `users` table in the database::
 
     UPDATE users SET password_hash='$2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'
         WHERE name='@test:test.com';
@@ -286,12 +300,22 @@ Testing with SyTest is recommended for verifying that changes related to the
 Client-Server API are functioning correctly. See the `installation instructions
 <https://github.com/matrix-org/sytest#installing>`_ for details.
 
+Building Internal API Documentation
+===================================
+
+Before building internal API documentation install sphinx and
+sphinxcontrib-napoleon::
+
+    pip install sphinx
+    pip install sphinxcontrib-napoleon
+
+Building internal API documentation::
+
+    python setup.py build_sphinx
+
 Troubleshooting
 ===============
 
-Need help? Join our community support room on Matrix:
-`#synapse:matrix.org <https://matrix.to/#/#synapse:matrix.org>`_
-
 Running out of File Handles
 ---------------------------
 
@@ -370,23 +394,3 @@ something like the following in their logs::
 
 This is normally caused by a misconfiguration in your reverse-proxy. See
 `<docs/reverse_proxy.md>`_ and double-check that your settings are correct.
-
-.. |support| image:: https://img.shields.io/matrix/synapse:matrix.org?label=support&logo=matrix
-  :alt: (get support on #synapse:matrix.org)
-  :target: https://matrix.to/#/#synapse:matrix.org
-
-.. |development| image:: https://img.shields.io/matrix/synapse-dev:matrix.org?label=development&logo=matrix
-  :alt: (discuss development on #synapse-dev:matrix.org)
-  :target: https://matrix.to/#/#synapse-dev:matrix.org
-
-.. |license| image:: https://img.shields.io/github/license/matrix-org/synapse
-  :alt: (check license in LICENSE file)
-  :target: LICENSE
-
-.. |pypi| image:: https://img.shields.io/pypi/v/matrix-synapse
-  :alt: (latest version released on PyPi)
-  :target: https://pypi.org/project/matrix-synapse
-
-.. |python| image:: https://img.shields.io/pypi/pyversions/matrix-synapse
-  :alt: (supported python versions)
-  :target: https://pypi.org/project/matrix-synapse

UPGRADE.rst

@@ -75,233 +75,6 @@ for example:
      wget https://packages.matrix.org/debian/pool/main/m/matrix-synapse-py3/matrix-synapse-py3_1.3.0+stretch1_amd64.deb
      dpkg -i matrix-synapse-py3_1.3.0+stretch1_amd64.deb
 
-Upgrading to v1.22.0
-====================
-
-ThirdPartyEventRules breaking changes
--------------------------------------
-
-This release introduces a backwards-incompatible change to modules making use of
-``ThirdPartyEventRules`` in Synapse. If you make use of a module defined under the
-``third_party_event_rules`` config option, please make sure it is updated to handle
-the below change:
-
-The ``http_client`` argument is no longer passed to modules as they are initialised. Instead,
-modules are expected to make use of the ``http_client`` property on the ``ModuleApi`` class.
-Modules are now passed a ``module_api`` argument during initialisation, which is an instance of
-``ModuleApi``. ``ModuleApi`` instances have a ``http_client`` property which acts the same as
-the ``http_client`` argument previously passed to ``ThirdPartyEventRules`` modules.
-
-Upgrading to v1.21.0
-====================
-
-Forwarding ``/_synapse/client`` through your reverse proxy
-----------------------------------------------------------
-
-The `reverse proxy documentation
-<https://github.com/matrix-org/synapse/blob/develop/docs/reverse_proxy.md>`_ has been updated
-to include reverse proxy directives for ``/_synapse/client/*`` endpoints. As the user password
-reset flow now uses endpoints under this prefix, **you must update your reverse proxy
-configurations for user password reset to work**.
-
-Additionally, note that the `Synapse worker documentation
-<https://github.com/matrix-org/synapse/blob/develop/docs/workers.md>`_ has been updated to
- state that the ``/_synapse/client/password_reset/email/submit_token`` endpoint can be handled
-by all workers. If you make use of Synapse's worker feature, please update your reverse proxy
-configuration to reflect this change.
-
-New HTML templates
-------------------
-
-A new HTML template,
-`password_reset_confirmation.html <https://github.com/matrix-org/synapse/blob/develop/synapse/res/templates/password_reset_confirmation.html>`_,
-has been added to the ``synapse/res/templates`` directory. If you are using a
-custom template directory, you may want to copy the template over and modify it.
-
-Note that as of v1.20.0, templates do not need to be included in custom template
-directories for Synapse to start. The default templates will be used if a custom
-template cannot be found.
-
-This page will appear to the user after clicking a password reset link that has
-been emailed to them.
-
-To complete password reset, the page must include a way to make a `POST`
-request to
-``/_synapse/client/password_reset/{medium}/submit_token``
-with the query parameters from the original link, presented as a URL-encoded form. See the file
-itself for more details.
-
-Updated Single Sign-on HTML Templates
--------------------------------------
-
-The ``saml_error.html`` template was removed from Synapse and replaced with the
-``sso_error.html`` template. If your Synapse is configured to use SAML and a
-custom ``sso_redirect_confirm_template_dir`` configuration then any customisations
-of the ``saml_error.html`` template will need to be merged into the ``sso_error.html``
-template. These templates are similar, but the parameters are slightly different:
-
-* The ``msg`` parameter should be renamed to ``error_description``.
-* There is no longer a ``code`` parameter for the response code.
-* A string ``error`` parameter is available that includes a short hint of why a
-  user is seeing the error page.
-
-Upgrading to v1.18.0
-====================
-
-Docker `-py3` suffix will be removed in future versions
--------------------------------------------------------
-
-From 10th August 2020, we will no longer publish Docker images with the `-py3` tag suffix. The images tagged with the `-py3` suffix have been identical to the non-suffixed tags since release 0.99.0, and the suffix is obsolete.
-
-On 10th August, we will remove the `latest-py3` tag. Existing per-release tags (such as `v1.18.0-py3`) will not be removed, but no new `-py3` tags will be added.
-
-Scripts relying on the `-py3` suffix will need to be updated.
-
-Redis replication is now recommended in lieu of TCP replication
----------------------------------------------------------------
-
-When setting up worker processes, we now recommend the use of a Redis server for replication. **The old direct TCP connection method is deprecated and will be removed in a future release.**
-See `docs/workers.md <docs/workers.md>`_ for more details.
-
-Upgrading to v1.14.0
-====================
-
-This version includes a database update which is run as part of the upgrade,
-and which may take a couple of minutes in the case of a large server. Synapse
-will not respond to HTTP requests while this update is taking place.
-
-Upgrading to v1.13.0
-====================
-
-Incorrect database migration in old synapse versions
-----------------------------------------------------
-
-A bug was introduced in Synapse 1.4.0 which could cause the room directory to
-be incomplete or empty if Synapse was upgraded directly from v1.2.1 or
-earlier, to versions between v1.4.0 and v1.12.x.
-
-This will *not* be a problem for Synapse installations which were:
- * created at v1.4.0 or later,
- * upgraded via v1.3.x, or
- * upgraded straight from v1.2.1 or earlier to v1.13.0 or later.
-
-If completeness of the room directory is a concern, installations which are
-affected can be repaired as follows:
-
-1. Run the following sql from a `psql` or `sqlite3` console:
-
-   .. code:: sql
-
-     INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES
-        ('populate_stats_process_rooms', '{}', 'current_state_events_membership');
-
-     INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES
-        ('populate_stats_process_users', '{}', 'populate_stats_process_rooms');
-
-2. Restart synapse.
-
-New Single Sign-on HTML Templates
----------------------------------
-
-New templates (``sso_auth_confirm.html``, ``sso_auth_success.html``, and
-``sso_account_deactivated.html``) were added to Synapse. If your Synapse is
-configured to use SSO and a custom  ``sso_redirect_confirm_template_dir``
-configuration then these templates will need to be copied from
-`synapse/res/templates <synapse/res/templates>`_ into that directory.
-
-Synapse SSO Plugins Method Deprecation
---------------------------------------
-
-Plugins using the ``complete_sso_login`` method of
-``synapse.module_api.ModuleApi`` should update to using the async/await
-version ``complete_sso_login_async`` which includes additional checks. The
-non-async version is considered deprecated.
-
-Rolling back to v1.12.4 after a failed upgrade
-----------------------------------------------
-
-v1.13.0 includes a lot of large changes. If something problematic occurs, you
-may want to roll-back to a previous version of Synapse. Because v1.13.0 also
-includes a new database schema version, reverting that version is also required
-alongside the generic rollback instructions mentioned above. In short, to roll
-back to v1.12.4 you need to:
-
-1. Stop the server
-2. Decrease the schema version in the database:
-
-   .. code:: sql
-
-      UPDATE schema_version SET version = 57;
-
-3. Downgrade Synapse by following the instructions for your installation method
-   in the "Rolling back to older versions" section above.
-
-
-Upgrading to v1.12.0
-====================
-
-This version includes a database update which is run as part of the upgrade,
-and which may take some time (several hours in the case of a large
-server). Synapse will not respond to HTTP requests while this update is taking
-place.
-
-This is only likely to be a problem in the case of a server which is
-participating in many rooms.
-
-0. As with all upgrades, it is recommended that you have a recent backup of
-   your database which can be used for recovery in the event of any problems.
-
-1. As an initial check to see if you will be affected, you can try running the
-   following query from the `psql` or `sqlite3` console. It is safe to run it
-   while Synapse is still running.
-
-   .. code:: sql
-
-      SELECT MAX(q.v) FROM (
-        SELECT (
-          SELECT ej.json AS v
-          FROM state_events se INNER JOIN event_json ej USING (event_id)
-          WHERE se.room_id=rooms.room_id AND se.type='m.room.create' AND se.state_key=''
-          LIMIT 1
-        ) FROM rooms WHERE rooms.room_version IS NULL
-      ) q;
-
-   This query will take about the same amount of time as the upgrade process: ie,
-   if it takes 5 minutes, then it is likely that Synapse will be unresponsive for
-   5 minutes during the upgrade.
-
-   If you consider an outage of this duration to be acceptable, no further
-   action is necessary and you can simply start Synapse 1.12.0.
-
-   If you would prefer to reduce the downtime, continue with the steps below.
-
-2. The easiest workaround for this issue is to manually
-   create a new index before upgrading. On PostgreSQL, his can be done as follows:
-
-   .. code:: sql
-
-      CREATE INDEX CONCURRENTLY tmp_upgrade_1_12_0_index
-      ON state_events(room_id) WHERE type = 'm.room.create';
-
-   The above query may take some time, but is also safe to run while Synapse is
-   running.
-
-   We assume that no SQLite users have databases large enough to be
-   affected. If you *are* affected, you can run a similar query, omitting the
-   ``CONCURRENTLY`` keyword. Note however that this operation may in itself cause
-   Synapse to stop running for some time. Synapse admins are reminded that
-   `SQLite is not recommended for use outside a test
-   environment <https://github.com/matrix-org/synapse/blob/master/README.rst#using-postgresql>`_.
-
-3. Once the index has been created, the ``SELECT`` query in step 1 above should
-   complete quickly. It is therefore safe to upgrade to Synapse 1.12.0.
-
-4. Once Synapse 1.12.0 has successfully started and is responding to HTTP
-   requests, the temporary index can be removed:
-
-   .. code:: sql
-
-      DROP INDEX tmp_upgrade_1_12_0_index;
 
 Upgrading to v1.10.0
 ====================

changelog.d/6391.feature

@@ -0,0 +1 @@
+Synapse's cache factor can now be configured in `homeserver.yaml` by the `caches.global_factor` setting. Additionally, `caches.per_cache_factors` controls the cache factors for individual caches.

changelog.d/6446.misc

@@ -0,0 +1 @@
+Add benchmarks for LruCache.

contrib/cmdclient/console.py

@@ -15,6 +15,11 @@
 # limitations under the License.
 
 """ Starts a synapse client console. """
+from __future__ import print_function
+
+from twisted.internet import reactor, defer, threads
+from http import TwistedHttpClient
+
 import argparse
 import cmd
 import getpass
@@ -23,14 +28,12 @@ import shlex
 import sys
 import time
 import urllib
-from http import TwistedHttpClient
-
-import nacl.encoding
-import nacl.signing
 import urlparse
-from signedjson.sign import SignatureVerifyException, verify_signed_json
 
-from twisted.internet import defer, reactor, threads
+import nacl.signing
+import nacl.encoding
+
+from signedjson.sign import verify_signed_json, SignatureVerifyException
 
 CONFIG_JSON = "cmdclient_config.json"
 
@@ -490,7 +493,7 @@ class SynapseCmd(cmd.Cmd):
         "list messages <roomid> from=END&to=START&limit=3"
         """
         args = self._parse(line, ["type", "roomid", "qp"])
-        if "type" not in args or "roomid" not in args:
+        if not "type" in args or not "roomid" in args:
             print("Must specify type and room ID.")
             return
         if args["type"] not in ["members", "messages"]:
@@ -505,7 +508,7 @@ class SynapseCmd(cmd.Cmd):
                 try:
                     key_value = key_value_str.split("=")
                     qp[key_value[0]] = key_value[1]
-                except Exception:
+                except:
                     print("Bad query param: %s" % key_value)
                     return
 
@@ -582,7 +585,7 @@ class SynapseCmd(cmd.Cmd):
                 parsed_url = urlparse.urlparse(args["path"])
                 qp.update(urlparse.parse_qs(parsed_url.query))
                 args["path"] = parsed_url.path
-            except Exception:
+            except:
                 pass
 
         reactor.callFromThread(
@@ -607,15 +610,13 @@ class SynapseCmd(cmd.Cmd):
 
     @defer.inlineCallbacks
     def _do_event_stream(self, timeout):
-        res = yield defer.ensureDeferred(
-            self.http_client.get_json(
-                self._url() + "/events",
-                {
-                    "access_token": self._tok(),
-                    "timeout": str(timeout),
-                    "from": self.event_stream_token,
-                },
-            )
+        res = yield self.http_client.get_json(
+            self._url() + "/events",
+            {
+                "access_token": self._tok(),
+                "timeout": str(timeout),
+                "from": self.event_stream_token,
+            },
         )
         print(json.dumps(res, indent=4))
 
@@ -771,10 +772,10 @@ def main(server_url, identity_server_url, username, token, config_path):
             syn_cmd.config = json.load(config)
             try:
                 http_client.verbose = "on" == syn_cmd.config["verbose"]
-            except Exception:
+            except:
                 pass
             print("Loaded config from %s" % config_path)
-    except Exception:
+    except:
         pass
 
     # Twisted-specific: Runs the command processor in Twisted's event loop

contrib/cmdclient/http.py

@@ -13,16 +13,18 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-import json
-import urllib
-from pprint import pformat
-
-from twisted.internet import defer, reactor
+from __future__ import print_function
 from twisted.web.client import Agent, readBody
 from twisted.web.http_headers import Headers
+from twisted.internet import defer, reactor
+
+from pprint import pformat
+
+import json
+import urllib
 
 
-class HttpClient:
+class HttpClient(object):
     """ Interface for talking json over http
     """
 
@@ -167,7 +169,7 @@ class TwistedHttpClient(HttpClient):
         return d
 
 
-class _RawProducer:
+class _RawProducer(object):
     def __init__(self, data):
         self.data = data
         self.body = data
@@ -184,7 +186,7 @@ class _RawProducer:
         pass
 
 
-class _JsonProducer:
+class _JsonProducer(object):
     """ Used by the twisted http client to create the HTTP body from json
     """
 

contrib/docker/docker-compose.yml

@@ -50,7 +50,7 @@ services:
       - traefik.http.routers.https-synapse.tls.certResolver=le-ssl
 
   db:
-    image: docker.io/postgres:12-alpine
+    image: docker.io/postgres:10-alpine
     # Change that password, of course!
     environment:
       - POSTGRES_USER=synapse

contrib/experiments/cursesio.py

@@ -141,7 +141,7 @@ class CursesStdIO:
         curses.endwin()
 
 
-class Callback:
+class Callback(object):
     def __init__(self, stdio):
         self.stdio = stdio
 

contrib/experiments/test_messaging.py

@@ -28,24 +28,27 @@ Currently assumes the local address is localhost:<port>
 """
 
 
+from synapse.federation import ReplicationHandler
+
+from synapse.federation.units import Pdu
+
+from synapse.util import origin_from_ucid
+
+from synapse.app.homeserver import SynapseHomeServer
+
+# from synapse.logging.utils import log_function
+
+from twisted.internet import reactor, defer
+from twisted.python import log
+
 import argparse
-import curses.wrapper
 import json
 import logging
 import os
 import re
 
 import cursesio
-
-from twisted.internet import defer, reactor
-from twisted.python import log
-
-from synapse.app.homeserver import SynapseHomeServer
-from synapse.federation import ReplicationHandler
-from synapse.federation.units import Pdu
-from synapse.util import origin_from_ucid
-
-# from synapse.logging.utils import log_function
+import curses.wrapper
 
 
 logger = logging.getLogger("example")
@@ -55,7 +58,7 @@ def excpetion_errback(failure):
     logging.exception(failure)
 
 
-class InputOutput:
+class InputOutput(object):
     """ This is responsible for basic I/O so that a user can interact with
     the example app.
     """
@@ -72,7 +75,7 @@ class InputOutput:
         """
 
         try:
-            m = re.match(r"^join (\S+)$", line)
+            m = re.match("^join (\S+)$", line)
             if m:
                 # The `sender` wants to join a room.
                 (room_name,) = m.groups()
@@ -81,7 +84,7 @@ class InputOutput:
                 # self.print_line("OK.")
                 return
 
-            m = re.match(r"^invite (\S+) (\S+)$", line)
+            m = re.match("^invite (\S+) (\S+)$", line)
             if m:
                 # `sender` wants to invite someone to a room
                 room_name, invitee = m.groups()
@@ -90,7 +93,7 @@ class InputOutput:
                 # self.print_line("OK.")
                 return
 
-            m = re.match(r"^send (\S+) (.*)$", line)
+            m = re.match("^send (\S+) (.*)$", line)
             if m:
                 # `sender` wants to message a room
                 room_name, body = m.groups()
@@ -99,7 +102,7 @@ class InputOutput:
                 # self.print_line("OK.")
                 return
 
-            m = re.match(r"^backfill (\S+)$", line)
+            m = re.match("^backfill (\S+)$", line)
             if m:
                 # we want to backfill a room
                 (room_name,) = m.groups()
@@ -132,7 +135,7 @@ class IOLoggerHandler(logging.Handler):
         self.io.print_log(msg)
 
 
-class Room:
+class Room(object):
     """ Used to store (in memory) the current membership state of a room, and
     which home servers we should send PDUs associated with the room to.
     """
@@ -198,6 +201,16 @@ class HomeServer(ReplicationHandler):
                 % (pdu.context, pdu.pdu_type, json.dumps(pdu.content))
             )
 
+    # def on_state_change(self, pdu):
+    ##self.output.print_line("#%s (state) %s *** %s" %
+    ##(pdu.context, pdu.state_key, pdu.pdu_type)
+    ##)
+
+    # if "joinee" in pdu.content:
+    # self._on_join(pdu.context, pdu.content["joinee"])
+    # elif "invitee" in pdu.content:
+    # self._on_invite(pdu.origin, pdu.context, pdu.content["invitee"])
+
     def _on_message(self, pdu):
         """ We received a message
         """
@@ -301,7 +314,7 @@ class HomeServer(ReplicationHandler):
         return self.replication_layer.backfill(dest, room_name, limit)
 
     def _get_room_remote_servers(self, room_name):
-        return list(self.joined_rooms.setdefault(room_name).servers)
+        return [i for i in self.joined_rooms.setdefault(room_name).servers]
 
     def _get_or_create_room(self, room_name):
         return self.joined_rooms.setdefault(room_name, Room(room_name))
@@ -321,7 +334,7 @@ def main(stdscr):
     user = args.user
     server_name = origin_from_ucid(user)
 
-    # Set up logging
+    ## Set up logging ##
 
     root_logger = logging.getLogger()
 
@@ -341,7 +354,7 @@ def main(stdscr):
     observer = log.PythonLoggingObserver()
     observer.start()
 
-    # Set up synapse server
+    ## Set up synapse server
 
     curses_stdio = cursesio.CursesStdIO(stdscr)
     input_output = InputOutput(curses_stdio, user)
@@ -355,16 +368,16 @@ def main(stdscr):
 
     input_output.set_home_server(hs)
 
-    # Add input_output logger
+    ## Add input_output logger
     io_logger = IOLoggerHandler(input_output)
     io_logger.setFormatter(formatter)
     root_logger.addHandler(io_logger)
 
-    # Start!
+    ## Start! ##
 
     try:
         port = int(server_name.split(":")[1])
-    except Exception:
+    except:
         port = 12345
 
     app_hs.get_http_server().start_listening(port)

contrib/graph/graph.py

@@ -1,10 +1,4 @@
-import argparse
-import cgi
-import datetime
-import json
-
-import pydot
-import urllib2
+from __future__ import print_function
 
 # Copyright 2014-2016 OpenMarket Ltd
 #
@@ -21,6 +15,15 @@ import urllib2
 # limitations under the License.
 
 
+import sqlite3
+import pydot
+import cgi
+import json
+import datetime
+import argparse
+import urllib2
+
+
 def make_name(pdu_id, origin):
     return "%s@%s" % (pdu_id, origin)
 
@@ -30,7 +33,7 @@ def make_graph(pdus, room, filename_prefix):
     node_map = {}
 
     origins = set()
-    colors = {"red", "green", "blue", "yellow", "purple"}
+    colors = set(("red", "green", "blue", "yellow", "purple"))
 
     for pdu in pdus:
         origins.add(pdu.get("origin"))
@@ -46,7 +49,7 @@ def make_graph(pdus, room, filename_prefix):
         try:
             c = colors.pop()
             color_map[o] = c
-        except Exception:
+        except:
             print("Run out of colours!")
             color_map[o] = "black"
 

contrib/graph/graph2.py

@@ -13,13 +13,12 @@
 # limitations under the License.
 
 
-import argparse
-import cgi
-import datetime
-import json
 import sqlite3
-
 import pydot
+import cgi
+import json
+import datetime
+import argparse
 
 from synapse.events import FrozenEvent
 from synapse.util.frozenutils import unfreeze
@@ -99,7 +98,7 @@ def make_graph(db_name, room_id, file_prefix, limit):
         for prev_id, _ in event.prev_events:
             try:
                 end_node = node_map[prev_id]
-            except Exception:
+            except:
                 end_node = pydot.Node(name=prev_id, label="<<b>%s</b>>" % (prev_id,))
 
                 node_map[prev_id] = end_node

contrib/graph/graph3.py

@@ -1,12 +1,4 @@
-import argparse
-import cgi
-import datetime
-
-import pydot
-import simplejson as json
-
-from synapse.events import FrozenEvent
-from synapse.util.frozenutils import unfreeze
+from __future__ import print_function
 
 # Copyright 2016 OpenMarket Ltd
 #
@@ -23,6 +15,18 @@ from synapse.util.frozenutils import unfreeze
 # limitations under the License.
 
 
+import pydot
+import cgi
+import simplejson as json
+import datetime
+import argparse
+
+from synapse.events import FrozenEvent
+from synapse.util.frozenutils import unfreeze
+
+from six import string_types
+
+
 def make_graph(file_name, room_id, file_prefix, limit):
     print("Reading lines")
     with open(file_name) as f:
@@ -58,7 +62,7 @@ def make_graph(file_name, room_id, file_prefix, limit):
         for key, value in unfreeze(event.get_dict()["content"]).items():
             if value is None:
                 value = "<null>"
-            elif isinstance(value, str):
+            elif isinstance(value, string_types):
                 pass
             else:
                 value = json.dumps(value)
@@ -104,7 +108,7 @@ def make_graph(file_name, room_id, file_prefix, limit):
         for prev_id, _ in event.prev_events:
             try:
                 end_node = node_map[prev_id]
-            except Exception:
+            except:
                 end_node = pydot.Node(name=prev_id, label="<<b>%s</b>>" % (prev_id,))
 
                 node_map[prev_id] = end_node

contrib/jitsimeetbridge/jitsimeetbridge.py

@@ -10,15 +10,17 @@ the bridge.
 Requires:
 npm install jquery jsdom
 """
-import json
-import subprocess
-import time
+from __future__ import print_function
 
 import gevent
 import grequests
 from BeautifulSoup import BeautifulSoup
+import json
+import urllib
+import subprocess
+import time
 
-ACCESS_TOKEN = ""
+# ACCESS_TOKEN="" #
 
 MATRIXBASE = "https://matrix.org/_matrix/client/api/v1/"
 MYUSERNAME = "@davetest:matrix.org"

contrib/scripts/kick_users.py

@@ -1,11 +1,15 @@
 #!/usr/bin/env python
-
+from __future__ import print_function
+from argparse import ArgumentParser
 import json
+import requests
 import sys
 import urllib
-from argparse import ArgumentParser
 
-import requests
+try:
+    raw_input
+except NameError:  # Python 3
+    raw_input = input
 
 
 def _mkurl(template, kws):
@@ -52,7 +56,7 @@ def main(hs, room_id, access_token, user_id_prefix, why):
     print("The following user IDs will be kicked from %s" % room_name)
     for uid in kick_list:
         print(uid)
-    doit = input("Continue? [Y]es\n")
+    doit = raw_input("Continue? [Y]es\n")
     if len(doit) > 0 and doit.lower() == "y":
         print("Kicking members...")
         # encode them all

contrib/systemd-with-workers/README.md

@@ -1,2 +1,150 @@
-The documentation for using systemd to manage synapse workers is now part of
-the main synapse distribution. See [docs/systemd-with-workers](../../docs/systemd-with-workers).
+# Setup Synapse with Workers and Systemd
+
+This is a setup for managing synapse with systemd including support for
+managing workers. It provides a `matrix-synapse`, as well as a
+`matrix-synapse-worker@` service for any workers you require. Additionally to
+group the required services it sets up a `matrix.target`. You can use this to
+automatically start any bot- or bridge-services. More on this in
+[Bots and Bridges](#bots-and-bridges).
+
+See the folder [system](system) for any service and target files.
+
+The folder [workers](workers) contains an example configuration for the
+`federation_reader` worker. Pay special attention to the name of the
+configuration file. In order to work with the `matrix-synapse-worker@.service`
+service, it needs to have the exact same name as the worker app.
+
+This setup expects neither the homeserver nor any workers to fork. Forking is
+handled by systemd.
+
+## Setup
+
+1. Adjust your matrix configs. Make sure that the worker config files have the
+exact same name as the worker app. Compare `matrix-synapse-worker@.service` for
+why. You can find an example worker config in the [workers](workers) folder. See
+below for relevant settings in the `homeserver.yaml`.
+2. Copy the `*.service` and `*.target` files in [system](system) to
+`/etc/systemd/system`.
+3. `systemctl enable matrix-synapse.service` this adds the homeserver
+app to the `matrix.target`
+4. *Optional.* `systemctl enable
+matrix-synapse-worker@federation_reader.service` this adds the federation_reader
+app to the `matrix-synapse.service`
+5. *Optional.* Repeat step 4 for any additional workers you require.
+6. *Optional.* Add any bots or bridges by enabling them.
+7. Start all matrix related services via `systemctl start matrix.target`
+8. *Optional.* Enable autostart of all matrix related services on system boot
+via `systemctl enable matrix.target`
+
+## Usage
+
+After you have setup you can use the following commands to manage your synapse
+installation:
+
+```
+# Start matrix-synapse, all workers and any enabled bots or bridges.
+systemctl start matrix.target
+
+# Restart matrix-synapse and all workers (not necessarily restarting bots
+# or bridges, see "Bots and Bridges")
+systemctl restart matrix-synapse.service
+
+# Stop matrix-synapse and all workers (not necessarily restarting bots
+# or bridges, see "Bots and Bridges")
+systemctl stop matrix-synapse.service
+
+# Restart a specific worker (i. e. federation_reader), the homeserver is
+# unaffected by this.
+systemctl restart matrix-synapse-worker@federation_reader.service
+
+# Add a new worker (assuming all configs are setup already)
+systemctl enable matrix-synapse-worker@federation_writer.service
+systemctl restart matrix-synapse.service
+```
+
+## The Configs
+
+Make sure the `worker_app` is set in the `homeserver.yaml` and it does not fork.
+
+```
+worker_app: synapse.app.homeserver 
+daemonize: false
+```
+
+None of the workers should fork, as forking is handled by systemd. Hence make
+sure this is present in all worker config files.
+
+```
+worker_daemonize: false
+```
+
+The config files of all workers are expected to be located in
+`/etc/matrix-synapse/workers`. If you want to use a different location you have
+to edit the provided `*.service` files accordingly.  
+
+## Bots and Bridges
+
+Most bots and bridges do not care if the homeserver goes down or is restarted.
+Depending on the implementation this may crash them though. So look up the docs
+or ask the community of the specific bridge or bot you want to run to make sure
+you choose the correct setup.
+
+Whichever configuration you choose, after the setup the following will enable
+automatically starting (and potentially restarting) your bot/bridge with the
+`matrix.target`.
+
+```
+systemctl enable <yourBotOrBridgeName>.service
+```
+
+**Note** that from an inactive synapse the bots/bridges will only be started with
+synapse if you start the `matrix.target`, not if you start the
+`matrix-synapse.service`. This is on purpose. Think of `matrix-synapse.service`
+as *just* synapse, but `matrix.target` being anything matrix related, including
+synapse and any and all enabled bots and bridges.
+
+### Start with synapse but ignore synapse going down
+
+If the bridge can handle shutdowns of the homeserver you'll want to install the
+service in the `matrix.target` and optionally add a
+`After=matrix-synapse.service` dependency to have the bot/bridge start after
+synapse on starting everything.
+
+In this case the service file should look like this.
+
+```
+[Unit]
+# ...
+# Optional, this will only ensure that if you start everything, synapse will
+# be started before the bot/bridge will be started.
+After=matrix-synapse.service
+
+[Service]
+# ...
+
+[Install]
+WantedBy=matrix.target
+```
+
+### Stop/restart when synapse stops/restarts
+
+If the bridge can't handle shutdowns of the homeserver you'll still want to
+install the service in the `matrix.target` but also have to specify the
+`After=matrix-synapse.service` *and* `BindsTo=matrix-synapse.service`
+dependencies to have the bot/bridge stop/restart with synapse.
+
+In this case the service file should look like this.
+
+```
+[Unit]
+# ...
+# Mandatory
+After=matrix-synapse.service
+BindsTo=matrix-synapse.service
+
+[Service]
+# ...
+
+[Install]
+WantedBy=matrix.target
+```

contrib/systemd-with-workers/system/matrix-synapse-worker@.service

@@ -0,0 +1,19 @@
+[Unit]
+Description=Synapse Matrix Worker
+After=matrix-synapse.service
+BindsTo=matrix-synapse.service
+
+[Service]
+Type=notify
+NotifyAccess=main
+User=matrix-synapse
+WorkingDirectory=/var/lib/matrix-synapse
+EnvironmentFile=/etc/default/matrix-synapse
+ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.%i --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --config-path=/etc/matrix-synapse/workers/%i.yaml
+ExecReload=/bin/kill -HUP $MAINPID
+Restart=always
+RestartSec=3
+SyslogIdentifier=matrix-synapse-%i
+
+[Install]
+WantedBy=matrix-synapse.service

contrib/systemd-with-workers/system/matrix-synapse.service

@@ -1,8 +1,5 @@
 [Unit]
-Description=Synapse master
-
-# This service should be restarted when the synapse target is restarted.
-PartOf=matrix-synapse.target
+Description=Synapse Matrix Homeserver
 
 [Service]
 Type=notify
@@ -18,4 +15,4 @@ RestartSec=3
 SyslogIdentifier=matrix-synapse
 
 [Install]
-WantedBy=matrix-synapse.target
+WantedBy=matrix.target

contrib/systemd-with-workers/system/matrix.target

@@ -0,0 +1,7 @@
+[Unit]
+Description=Contains matrix services like synapse, bridges and bots
+After=network.target
+AllowIsolate=no
+
+[Install]
+WantedBy=multi-user.target

contrib/systemd-with-workers/workers/federation_reader.yaml

@@ -1,7 +1,7 @@
 worker_app: synapse.app.federation_reader
-worker_name: federation_reader1
 
 worker_replication_host: 127.0.0.1
+worker_replication_port: 9092
 worker_replication_http_port: 9093
 
 worker_listeners:
@@ -10,4 +10,5 @@ worker_listeners:
       resources:
           - names: [federation]
 
+worker_daemonize: false
 worker_log_config: /etc/matrix-synapse/federation-reader-log.yaml

contrib/systemd/matrix-synapse.service

@@ -15,9 +15,6 @@
 
 [Unit]
 Description=Synapse Matrix homeserver
-# If you are using postgresql to persist data, uncomment this line to make sure
-# synapse starts after the postgresql service.
-# After=postgresql.service
 
 [Service]
 Type=notify

debian/build_virtualenv

@@ -36,13 +36,14 @@ esac
 dh_virtualenv \
     --install-suffix "matrix-synapse" \
     --builtin-venv \
+    --setuptools \
     --python "$SNAKE" \
     --upgrade-pip \
     --preinstall="lxml" \
     --preinstall="mock" \
     --extra-pip-arg="--no-cache-dir" \
     --extra-pip-arg="--compile" \
-    --extras="all,systemd,test"
+    --extras="all,systemd"
 
 PACKAGE_BUILD_DIR="debian/matrix-synapse-py3"
 VIRTUALENV_DIR="${PACKAGE_BUILD_DIR}${DH_VIRTUALENV_INSTALL_ROOT}/matrix-synapse"

debian/changelog

@@ -1,140 +1,3 @@
-matrix-synapse-py3 (1.22.0) stable; urgency=medium
-
-  * New synapse release 1.22.0.
-
- -- Synapse Packaging team <packages@matrix.org>  Tue, 27 Oct 2020 12:07:12 +0000
-
-matrix-synapse-py3 (1.21.2) stable; urgency=medium
-
-  [ Synapse Packaging team ]
-  * New synapse release 1.21.2.
-
- -- Synapse Packaging team <packages@matrix.org>  Thu, 15 Oct 2020 09:23:27 -0400
-
-matrix-synapse-py3 (1.21.1) stable; urgency=medium
-
-  [ Synapse Packaging team ]
-  * New synapse release 1.21.1.
-
-  [ Andrew Morgan ]
-  * Explicitly install "test" python dependencies.
-
- -- Synapse Packaging team <packages@matrix.org>  Tue, 13 Oct 2020 10:24:13 +0100
-
-matrix-synapse-py3 (1.21.0) stable; urgency=medium
-
-  * New synapse release 1.21.0.
-
- -- Synapse Packaging team <packages@matrix.org>  Mon, 12 Oct 2020 15:47:44 +0100
-
-matrix-synapse-py3 (1.20.1) stable; urgency=medium
-
-  * New synapse release 1.20.1.
-
- -- Synapse Packaging team <packages@matrix.org>  Thu, 24 Sep 2020 16:25:22 +0100
-
-matrix-synapse-py3 (1.20.0) stable; urgency=medium
-
-  [ Synapse Packaging team ]
-  * New synapse release 1.20.0.
-
-  [ Dexter Chua ]
-  * Use Type=notify in systemd service
-
- -- Synapse Packaging team <packages@matrix.org>  Tue, 22 Sep 2020 15:19:32 +0100
-
-matrix-synapse-py3 (1.19.3) stable; urgency=medium
-
-  * New synapse release 1.19.3.
-
- -- Synapse Packaging team <packages@matrix.org>  Fri, 18 Sep 2020 14:59:30 +0100
-
-matrix-synapse-py3 (1.19.2) stable; urgency=medium
-
-  * New synapse release 1.19.2.
-
- -- Synapse Packaging team <packages@matrix.org>  Wed, 16 Sep 2020 12:50:30 +0100
-
-matrix-synapse-py3 (1.19.1) stable; urgency=medium
-
-  * New synapse release 1.19.1.
-
- -- Synapse Packaging team <packages@matrix.org>  Thu, 27 Aug 2020 10:50:19 +0100
-
-matrix-synapse-py3 (1.19.0) stable; urgency=medium
-
-  [ Synapse Packaging team ]
-  * New synapse release 1.19.0.
-
-  [ Aaron Raimist ]
-  * Fix outdated documentation for SYNAPSE_CACHE_FACTOR
-
- -- Synapse Packaging team <packages@matrix.org>  Mon, 17 Aug 2020 14:06:42 +0100
-
-matrix-synapse-py3 (1.18.0) stable; urgency=medium
-
-  * New synapse release 1.18.0.
-
- -- Synapse Packaging team <packages@matrix.org>  Thu, 30 Jul 2020 10:55:53 +0100
-
-matrix-synapse-py3 (1.17.0) stable; urgency=medium
-
-  * New synapse release 1.17.0.
-
- -- Synapse Packaging team <packages@matrix.org>  Mon, 13 Jul 2020 10:20:31 +0100
-
-matrix-synapse-py3 (1.16.1) stable; urgency=medium
-
-  * New synapse release 1.16.1.
-
- -- Synapse Packaging team <packages@matrix.org>  Fri, 10 Jul 2020 12:09:24 +0100
-
-matrix-synapse-py3 (1.17.0rc1) stable; urgency=medium
-
-  * New synapse release 1.17.0rc1.
-
- -- Synapse Packaging team <packages@matrix.org>  Thu, 09 Jul 2020 16:53:12 +0100
-
-matrix-synapse-py3 (1.16.0) stable; urgency=medium
-
-  * New synapse release 1.16.0.
-
- -- Synapse Packaging team <packages@matrix.org>  Wed, 08 Jul 2020 11:03:48 +0100
-
-matrix-synapse-py3 (1.15.2) stable; urgency=medium
-
-  * New synapse release 1.15.2.
-
- -- Synapse Packaging team <packages@matrix.org>  Thu, 02 Jul 2020 10:34:00 -0400
-
-matrix-synapse-py3 (1.15.1) stable; urgency=medium
-
-  * New synapse release 1.15.1.
-
- -- Synapse Packaging team <packages@matrix.org>  Tue, 16 Jun 2020 10:27:50 +0100
-
-matrix-synapse-py3 (1.15.0) stable; urgency=medium
-
-  * New synapse release 1.15.0.
-
- -- Synapse Packaging team <packages@matrix.org>  Thu, 11 Jun 2020 13:27:06 +0100
-
-matrix-synapse-py3 (1.14.0) stable; urgency=medium
-
-  * New synapse release 1.14.0.
-
- -- Synapse Packaging team <packages@matrix.org>  Thu, 28 May 2020 10:37:27 +0000
-
-matrix-synapse-py3 (1.13.0) stable; urgency=medium
-
-  [ Patrick Cloke ]
-  * Add information about .well-known files to Debian installation scripts.
-
-  [ Synapse Packaging team ]
-  * New synapse release 1.13.0.
-
- -- Synapse Packaging team <packages@matrix.org>  Tue, 19 May 2020 09:16:56 -0400
-
 matrix-synapse-py3 (1.12.4) stable; urgency=medium
 
   * New synapse release 1.12.4.

debian/matrix-synapse.default

@@ -1,2 +1,2 @@
 # Specify environment variables used when running Synapse
-# SYNAPSE_CACHE_FACTOR=0.5 (default)
+# SYNAPSE_CACHE_FACTOR=1 (default)

debian/matrix-synapse.service

@@ -2,7 +2,7 @@
 Description=Synapse Matrix homeserver
 
 [Service]
-Type=notify
+Type=simple
 User=matrix-synapse
 WorkingDirectory=/var/lib/matrix-synapse
 EnvironmentFile=/etc/default/matrix-synapse

debian/po/templates.pot

@@ -1,14 +1,14 @@
 # SOME DESCRIPTIVE TITLE.
 # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the matrix-synapse-py3 package.
+# This file is distributed under the same license as the matrix-synapse package.
 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
 #
 #, fuzzy
 msgid ""
 msgstr ""
-"Project-Id-Version: matrix-synapse-py3\n"
-"Report-Msgid-Bugs-To: matrix-synapse-py3@packages.debian.org\n"
-"POT-Creation-Date: 2020-04-06 16:39-0400\n"
+"Project-Id-Version: matrix-synapse\n"
+"Report-Msgid-Bugs-To: matrix-synapse@packages.debian.org\n"
+"POT-Creation-Date: 2017-02-21 07:51+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -28,10 +28,7 @@ msgstr ""
 #: ../templates:1001
 msgid ""
 "The name that this homeserver will appear as, to clients and other servers "
-"via federation. This is normally the public hostname of the server running "
-"synapse, but can be different if you set up delegation. Please refer to the "
-"delegation documentation in this case: https://github.com/matrix-org/synapse/"
-"blob/master/docs/delegate.md."
+"via federation. This name should match the SRV record published in DNS."
 msgstr ""
 
 #. Type: boolean

debian/synctl.ronn

@@ -46,20 +46,19 @@ Configuration file may be generated as follows:
 ## ENVIRONMENT
 
   * `SYNAPSE_CACHE_FACTOR`:
-    Synapse's architecture is quite RAM hungry currently - we deliberately
-    cache a lot of recent room data and metadata in RAM in order to speed up
-    common requests. We'll improve this in the future, but for now the easiest
-    way to either reduce the RAM usage (at the risk of slowing things down)
-    is to set the almost-undocumented ``SYNAPSE_CACHE_FACTOR`` environment
-    variable. The default is 0.5, which can be decreased to reduce RAM usage
-    in memory constrained enviroments, or increased if performance starts to
-    degrade.
-
-    However, degraded performance due to a low cache factor, common on
-    machines with slow disks, often leads to explosions in memory use due
-    backlogged requests. In this case, reducing the cache factor will make
-    things worse. Instead, try increasing it drastically. 2.0 is a good
-    starting value.
+    Synapse's architecture is quite RAM hungry currently - a lot of
+    recent room data and metadata is deliberately cached in RAM in
+    order to speed up common requests.  This will be improved in
+    future, but for now the easiest way to either reduce the RAM usage
+    (at the risk of slowing things down) is to set the
+    SYNAPSE_CACHE_FACTOR environment variable. Roughly speaking, a
+    SYNAPSE_CACHE_FACTOR of 1.0 will max out at around 3-4GB of
+    resident memory - this is what we currently run the matrix.org
+    on. The default setting is currently 0.1, which is probably around
+    a ~700MB footprint. You can dial it down further to 0.02 if
+    desired, which targets roughly ~512MB. Conversely you can dial it
+    up if you need performance for lots of users and have a box with a
+    lot of RAM.
 
 ## COPYRIGHT
 

debian/templates

@@ -2,10 +2,8 @@ Template: matrix-synapse/server-name
 Type: string
 _Description: Name of the server:
  The name that this homeserver will appear as, to clients and other
- servers via federation. This is normally the public hostname of the
- server running synapse, but can be different if you set up delegation.
- Please refer to the delegation documentation in this case:
- https://github.com/matrix-org/synapse/blob/master/docs/delegate.md.
+ servers via federation. This name should match the SRV record
+ published in DNS.
 
 Template: matrix-synapse/report-stats
 Type: boolean

demo/start.sh

@@ -30,8 +30,6 @@ for port in 8080 8081 8082; do
     if ! grep -F "Customisation made by demo/start.sh" -q  $DIR/etc/$port.config; then
         printf '\n\n# Customisation made by demo/start.sh\n' >> $DIR/etc/$port.config
 
-        echo "public_baseurl: http://localhost:$port/" >> $DIR/etc/$port.config
-
         echo 'enable_registration: true' >> $DIR/etc/$port.config
 
         # Warning, this heredoc depends on the interaction of tabs and spaces. Please don't

docker/Dockerfile

@@ -16,36 +16,34 @@ ARG PYTHON_VERSION=3.7
 ###
 ### Stage 0: builder
 ###
-FROM docker.io/python:${PYTHON_VERSION}-slim as builder
+FROM docker.io/python:${PYTHON_VERSION}-alpine3.11 as builder
 
 # install the OS build deps
-RUN apt-get update && apt-get install -y \
-    build-essential \
-    libffi-dev \
-    libjpeg-dev \
-    libpq-dev \
-    libssl-dev \
-    libwebp-dev \
-    libxml++2.6-dev \
-    libxslt1-dev \
-    zlib1g-dev \
- && rm -rf /var/lib/apt/lists/*
 
-# Build dependencies that are not available as wheels, to speed up rebuilds
+RUN apk add \
+        build-base \
+        libffi-dev \
+        libjpeg-turbo-dev \
+        libressl-dev \
+        libxslt-dev \
+        linux-headers \
+        postgresql-dev \
+        zlib-dev
+
+# build things which have slow build steps, before we copy synapse, so that
+# the layer can be cached.
+#
+# (we really just care about caching a wheel here, as the "pip install" below
+# will install them again.)
+
 RUN pip install --prefix="/install" --no-warn-script-location \
-        frozendict \
-        jaeger-client \
-        opentracing \
-        prometheus-client \
-        psycopg2 \
-        pycparser \
-        pyrsistent \
-        pyyaml \
-        simplejson \
-        threadloop \
-        thrift
+        cryptography \
+        msgpack-python \
+        pillow \
+        pynacl
 
 # now install synapse and all of the python deps to /install.
+
 COPY synapse /synapse/synapse/
 COPY scripts /synapse/scripts/
 COPY MANIFEST.in README.rst setup.py synctl /synapse/
@@ -57,16 +55,19 @@ RUN pip install --prefix="/install" --no-warn-script-location \
 ### Stage 1: runtime
 ###
 
-FROM docker.io/python:${PYTHON_VERSION}-slim
+FROM docker.io/python:${PYTHON_VERSION}-alpine3.10
 
-RUN apt-get update && apt-get install -y \
-    curl \
-    gosu \
-    libjpeg62-turbo \
-    libpq5 \
-    libwebp6 \
-    xmlsec1 \
- && rm -rf /var/lib/apt/lists/*
+# xmlsec is required for saml support
+RUN apk add --no-cache --virtual .runtime_deps \
+        libffi \
+        libjpeg-turbo \
+        libressl \
+        libxslt \
+        libpq \
+        zlib \
+        su-exec \
+        tzdata \
+        xmlsec
 
 COPY --from=builder /install /usr/local
 COPY ./docker/start.py /start.py
@@ -77,6 +78,3 @@ VOLUME ["/data"]
 EXPOSE 8008/tcp 8009/tcp 8448/tcp
 
 ENTRYPOINT ["/start.py"]
-
-HEALTHCHECK --interval=1m --timeout=5s \
-  CMD curl -fSs http://localhost:8008/health || exit 1

docker/Dockerfile-dhvirtualenv

@@ -27,18 +27,15 @@ RUN env DEBIAN_FRONTEND=noninteractive apt-get install \
         wget
 
 # fetch and unpack the package
-RUN mkdir /dh-virtualenv
-RUN wget -q -O /dh-virtualenv.tar.gz https://github.com/spotify/dh-virtualenv/archive/ac6e1b1.tar.gz
-RUN tar -xv --strip-components=1 -C /dh-virtualenv -f /dh-virtualenv.tar.gz
+RUN wget -q -O /dh-virtuenv-1.1.tar.gz https://github.com/spotify/dh-virtualenv/archive/1.1.tar.gz
+RUN tar xvf /dh-virtuenv-1.1.tar.gz
 
-# install its build deps. We do another apt-cache-update here, because we might
-# be using a stale cache from docker build.
-RUN apt-get update -qq -o Acquire::Languages=none \
-    && cd /dh-virtualenv \
-    && env DEBIAN_FRONTEND=noninteractive mk-build-deps -ri -t "apt-get -y --no-install-recommends"
+# install its build deps
+RUN cd dh-virtualenv-1.1/ \
+    && env DEBIAN_FRONTEND=noninteractive mk-build-deps -ri -t "apt-get -yqq --no-install-recommends"
 
 # build it
-RUN cd /dh-virtualenv && dpkg-buildpackage -us -uc -b
+RUN cd dh-virtualenv-1.1 && dpkg-buildpackage -us -uc -b
 
 ###
 ### Stage 1
@@ -71,12 +68,12 @@ RUN apt-get update -qq -o Acquire::Languages=none \
         sqlite3 \
         libpq-dev
 
-COPY --from=builder /dh-virtualenv_1.2~dev-1_all.deb /
+COPY --from=builder /dh-virtualenv_1.1-1_all.deb /
 
 # install dhvirtualenv. Update the apt cache again first, in case we got a
 # cached cache from docker the first time.
 RUN apt-get update -qq -o Acquire::Languages=none \
-    && apt-get install -yq /dh-virtualenv_1.2~dev-1_all.deb
+    && apt-get install -yq /dh-virtualenv_1.1-1_all.deb
 
 WORKDIR /synapse/source
 ENTRYPOINT ["bash","/synapse/source/docker/build_debian.sh"]

docker/README.md

@@ -83,7 +83,7 @@ docker logs synapse
 If all is well, you should now be able to connect to http://localhost:8008 and
 see a confirmation message.
 
-The following environment variables are supported in `run` mode:
+The following environment variables are supported in run mode:
 
 * `SYNAPSE_CONFIG_DIR`: where additional config files are stored. Defaults to
   `/data`.
@@ -94,35 +94,6 @@ The following environment variables are supported in `run` mode:
 * `UID`, `GID`: the user and group id to run Synapse as. Defaults to `991`, `991`.
 * `TZ`: the [timezone](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones) the container will run with. Defaults to `UTC`.
 
-For more complex setups (e.g. for workers) you can also pass your args directly to synapse using `run` mode. For example like this:
-
-```
-docker run -d --name synapse \
-    --mount type=volume,src=synapse-data,dst=/data \
-    -p 8008:8008 \
-    matrixdotorg/synapse:latest run \
-    -m synapse.app.generic_worker \
-    --config-path=/data/homeserver.yaml \
-    --config-path=/data/generic_worker.yaml
-```
-
-If you do not provide `-m`, the value of the `SYNAPSE_WORKER` environment variable is used. If you do not provide at least one `--config-path` or `-c`, the value of the `SYNAPSE_CONFIG_PATH` environment variable is used instead.
-
-## Generating an (admin) user
-
-After synapse is running, you may wish to create a user via `register_new_matrix_user`.
-
-This requires a `registration_shared_secret` to be set in your config file. Synapse
-must be restarted to pick up this change.
-
-You can then call the script:
-
-```
-docker exec -it synapse register_new_matrix_user http://localhost:8008 -c /data/homeserver.yaml --help
-```
-
-Remember to remove the `registration_shared_secret` and restart if you no-longer need it.
-
 ## TLS support
 
 The default configuration exposes a single HTTP port: http://localhost:8008. It
@@ -176,32 +147,3 @@ docker build -t matrixdotorg/synapse -f docker/Dockerfile .
 
 You can choose to build a different docker image by changing the value of the `-f` flag to
 point to another Dockerfile.
-
-## Disabling the healthcheck
-
-If you are using a non-standard port or tls inside docker you can disable the healthcheck
-whilst running the above `docker run` commands. 
-
-```
-   --no-healthcheck
-```
-## Setting custom healthcheck on docker run
-
-If you wish to point the healthcheck at a different port with docker command, add the following
-
-```
-  --health-cmd 'curl -fSs http://localhost:1234/health'
-```
-
-## Setting the healthcheck in docker-compose file
-
-You can add the following to set a custom healthcheck in a docker compose file.
-You will need version >2.1 for this to work. 
-
-```
-healthcheck:
-  test: ["CMD", "curl", "-fSs", "http://localhost:8008/health"]
-  interval: 1m
-  timeout: 10s
-  retries: 3
-```

docker/conf/homeserver.yaml

@@ -90,7 +90,7 @@ federation_rc_concurrent: 3
 
 media_store_path: "/data/media"
 uploads_path: "/data/uploads"
-max_upload_size: "{{ SYNAPSE_MAX_UPLOAD_SIZE or "50M" }}"
+max_upload_size: "{{ SYNAPSE_MAX_UPLOAD_SIZE or "10M" }}"
 max_image_pixels: "32M"
 dynamic_thumbnails: false
 

docker/conf/log.config

@@ -4,10 +4,16 @@ formatters:
   precise:
    format: '%(asctime)s - %(name)s - %(lineno)d - %(levelname)s - %(request)s - %(message)s'
 
+filters:
+  context:
+    (): synapse.logging.context.LoggingContextFilter
+    request: ""
+
 handlers:
   console:
     class: logging.StreamHandler
     formatter: precise
+    filters: [context]
 
 loggers:
     synapse.storage.SQL:

docker/start.py

@@ -120,7 +120,7 @@ def generate_config_from_template(config_dir, config_path, environ, ownership):
 
     if ownership is not None:
         subprocess.check_output(["chown", "-R", ownership, "/data"])
-        args = ["gosu", ownership] + args
+        args = ["su-exec", ownership] + args
 
     subprocess.check_output(args)
 
@@ -172,14 +172,14 @@ def run_generate_config(environ, ownership):
         # make sure that synapse has perms to write to the data dir.
         subprocess.check_output(["chown", ownership, data_dir])
 
-        args = ["gosu", ownership] + args
-        os.execv("/usr/sbin/gosu", args)
+        args = ["su-exec", ownership] + args
+        os.execv("/sbin/su-exec", args)
     else:
         os.execv("/usr/local/bin/python", args)
 
 
 def main(args, environ):
-    mode = args[1] if len(args) > 1 else "run"
+    mode = args[1] if len(args) > 1 else None
     desired_uid = int(environ.get("UID", "991"))
     desired_gid = int(environ.get("GID", "991"))
     synapse_worker = environ.get("SYNAPSE_WORKER", "synapse.app.homeserver")
@@ -189,7 +189,7 @@ def main(args, environ):
         ownership = "{}:{}".format(desired_uid, desired_gid)
 
     if ownership is None:
-        log("Will not perform chmod/gosu as UserID already matches request")
+        log("Will not perform chmod/su-exec as UserID already matches request")
 
     # In generate mode, generate a configuration and missing keys, then exit
     if mode == "generate":
@@ -205,50 +205,39 @@ def main(args, environ):
             config_dir, config_path, environ, ownership
         )
 
-    if mode != "run":
+    if mode is not None:
         error("Unknown execution mode '%s'" % (mode,))
 
-    args = args[2:]
+    config_dir = environ.get("SYNAPSE_CONFIG_DIR", "/data")
+    config_path = environ.get("SYNAPSE_CONFIG_PATH", config_dir + "/homeserver.yaml")
 
-    if "-m" not in args:
-        args = ["-m", synapse_worker] + args
-
-    # if there are no config files passed to synapse, try adding the default file
-    if not any(p.startswith("--config-path") or p.startswith("-c") for p in args):
-        config_dir = environ.get("SYNAPSE_CONFIG_DIR", "/data")
-        config_path = environ.get(
-            "SYNAPSE_CONFIG_PATH", config_dir + "/homeserver.yaml"
-        )
-
-        if not os.path.exists(config_path):
-            if "SYNAPSE_SERVER_NAME" in environ:
-                error(
-                    """\
+    if not os.path.exists(config_path):
+        if "SYNAPSE_SERVER_NAME" in environ:
+            error(
+                """\
 Config file '%s' does not exist.
 
 The synapse docker image no longer supports generating a config file on-the-fly
 based on environment variables. You can migrate to a static config file by
 running with 'migrate_config'. See the README for more details.
 """
-                    % (config_path,)
-                )
-
-            error(
-                "Config file '%s' does not exist. You should either create a new "
-                "config file by running with the `generate` argument (and then edit "
-                "the resulting file before restarting) or specify the path to an "
-                "existing config file with the SYNAPSE_CONFIG_PATH variable."
                 % (config_path,)
             )
 
-        args += ["--config-path", config_path]
+        error(
+            "Config file '%s' does not exist. You should either create a new "
+            "config file by running with the `generate` argument (and then edit "
+            "the resulting file before restarting) or specify the path to an "
+            "existing config file with the SYNAPSE_CONFIG_PATH variable."
+            % (config_path,)
+        )
 
-    log("Starting synapse with args " + " ".join(args))
+    log("Starting synapse with config file " + config_path)
 
-    args = ["python"] + args
+    args = ["python", "-m", synapse_worker, "--config-path", config_path]
     if ownership is not None:
-        args = ["gosu", ownership] + args
-        os.execv("/usr/sbin/gosu", args)
+        args = ["su-exec", ownership] + args
+        os.execv("/sbin/su-exec", args)
     else:
         os.execv("/usr/local/bin/python", args)
 

docs/.sample_config_header.yaml

@@ -10,16 +10,5 @@
 # homeserver.yaml. Instead, if you are starting from scratch, please generate
 # a fresh config using Synapse by following the instructions in INSTALL.md.
 
-# Configuration options that take a time period can be set using a number
-# followed by a letter. Letters have the following meanings:
-# s = second
-# m = minute
-# h = hour
-# d = day
-# w = week
-# y = year
-# For example, setting redaction_retention_period: 5m would remove redacted
-# messages from the database after 5 minutes, rather than 5 months.
-
 ################################################################################
 

docs/ACME.md

@@ -12,14 +12,13 @@ introduced support for automatically provisioning certificates through
 In [March 2019](https://community.letsencrypt.org/t/end-of-life-plan-for-acmev1/88430),
 Let's Encrypt announced that they were deprecating version 1 of the ACME
 protocol, with the plan to disable the use of it for new accounts in
-November 2019, for new domains in June 2020, and for existing accounts and
-domains in June 2021.
+November 2019, and for existing accounts in June 2020.
 
 Synapse doesn't currently support version 2 of the ACME protocol, which
 means that:
 
 * for existing installs, Synapse's built-in ACME support will continue
-  to work until June 2021.
+  to work until June 2020.
 * for new installs, this feature will not work at all.
 
 Either way, it is recommended to move from Synapse's ACME support

docs/admin_api/README.rst

@@ -4,21 +4,17 @@ Admin APIs
 This directory includes documentation for the various synapse specific admin
 APIs available.
 
-Authenticating as a server admin
---------------------------------
+Only users that are server admins can use these APIs. A user can be marked as a
+server admin by updating the database directly, e.g.:
 
-Many of the API calls in the admin api will require an `access_token` for a
-server admin. (Note that a server admin is distinct from a room admin.)
+``UPDATE users SET admin = 1 WHERE name = '@foo:bar.com'``
 
-A user can be marked as a server admin by updating the database directly, e.g.:
+Restarting may be required for the changes to register.
 
-.. code-block:: sql
-
-    UPDATE users SET admin = 1 WHERE name = '@foo:bar.com';
-
-A new server admin user can also be created using the
-``register_new_matrix_user`` script.
+Using an admin access_token
+###########################
 
+Many of the API calls listed in the documentation here will require to include an admin `access_token`.
 Finding your user's `access_token` is client-dependent, but will usually be shown in the client's settings.
 
 Once you have your `access_token`, to include it in a request, the best option is to add the token to a request header:

docs/admin_api/delete_group.md

@@ -4,11 +4,11 @@ This API lets a server admin delete a local group. Doing so will kick all
 users out of the group so that their clients will correctly handle the group
 being deleted.
 
+
 The API is:
 
 ```
 POST /_synapse/admin/v1/delete_group/<group_id>
 ```
 
-To use it, you will need to authenticate by providing an `access_token` for a
-server admin: see [README.rst](README.rst).
+including an `access_token` of a server admin.

docs/admin_api/event_reports.rst

@@ -1,129 +0,0 @@
-Show reported events
-====================
-
-This API returns information about reported events.
-
-The api is::
-
-    GET /_synapse/admin/v1/event_reports?from=0&limit=10
-
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
-It returns a JSON body like the following:
-
-.. code:: jsonc
-
-    {
-        "event_reports": [
-            {
-                "content": {
-                    "reason": "foo",
-                    "score": -100
-                },
-                "event_id": "$bNUFCwGzWca1meCGkjp-zwslF-GfVcXukvRLI1_FaVY",
-                "event_json": {
-                    "auth_events": [
-                        "$YK4arsKKcc0LRoe700pS8DSjOvUT4NDv0HfInlMFw2M",
-                        "$oggsNXxzPFRE3y53SUNd7nsj69-QzKv03a1RucHu-ws"
-                    ],
-                    "content": {
-                        "body": "matrix.org: This Week in Matrix",
-                        "format": "org.matrix.custom.html",
-                        "formatted_body": "<strong>matrix.org</strong>:<br><a href=\"https://matrix.org/blog/\"><strong>This Week in Matrix</strong></a>",
-                        "msgtype": "m.notice"
-                    },
-                    "depth": 546,
-                    "hashes": {
-                        "sha256": "xK1//xnmvHJIOvbgXlkI8eEqdvoMmihVDJ9J4SNlsAw"
-                    },
-                    "origin": "matrix.org",
-                    "origin_server_ts": 1592291711430,
-                    "prev_events": [
-                        "$YK4arsKKcc0LRoe700pS8DSjOvUT4NDv0HfInlMFw2M"
-                    ],
-                    "prev_state": [],
-                    "room_id": "!ERAgBpSOcCCuTJqQPk:matrix.org",
-                    "sender": "@foobar:matrix.org",
-                    "signatures": {
-                        "matrix.org": {
-                            "ed25519:a_JaEG": "cs+OUKW/iHx5pEidbWxh0UiNNHwe46Ai9LwNz+Ah16aWDNszVIe2gaAcVZfvNsBhakQTew51tlKmL2kspXk/Dg"
-                        }
-                    },
-                    "type": "m.room.message",
-                    "unsigned": {
-                        "age_ts": 1592291711430,
-                    }
-                },
-                "id": 2,
-                "reason": "foo",
-                "received_ts": 1570897107409,
-                "room_alias": "#alias1:matrix.org",
-                "room_id": "!ERAgBpSOcCCuTJqQPk:matrix.org",
-                "sender": "@foobar:matrix.org",
-                "user_id": "@foo:matrix.org"
-            },
-            {
-                "content": {
-                    "reason": "bar",
-                    "score": -100
-                },
-                "event_id": "$3IcdZsDaN_En-S1DF4EMCy3v4gNRKeOJs8W5qTOKj4I",
-                "event_json": {
-                    // hidden items
-                    // see above
-                },
-                "id": 3,
-                "reason": "bar",
-                "received_ts": 1598889612059,
-                "room_alias": "#alias2:matrix.org",
-                "room_id": "!eGvUQuTCkHGVwNMOjv:matrix.org",
-                "sender": "@foobar:matrix.org",
-                "user_id": "@bar:matrix.org"
-            }
-        ],
-        "next_token": 2,
-        "total": 4
-    }
-
-To paginate, check for ``next_token`` and if present, call the endpoint again
-with ``from`` set to the value of ``next_token``. This will return a new page.
-
-If the endpoint does not return a ``next_token`` then there are no more
-reports to paginate through.
-
-**URL parameters:**
-
-- ``limit``: integer - Is optional but is used for pagination,
-  denoting the maximum number of items to return in this call. Defaults to ``100``.
-- ``from``: integer - Is optional but used for pagination,
-  denoting the offset in the returned results. This should be treated as an opaque value and
-  not explicitly set to anything other than the return value of ``next_token`` from a previous call.
-  Defaults to ``0``.
-- ``dir``: string - Direction of event report order. Whether to fetch the most recent first (``b``) or the
-  oldest first (``f``). Defaults to ``b``.
-- ``user_id``: string - Is optional and filters to only return users with user IDs that contain this value.
-  This is the user who reported the event and wrote the reason.
-- ``room_id``: string - Is optional and filters to only return rooms with room IDs that contain this value.
-
-**Response**
-
-The following fields are returned in the JSON response body:
-
-- ``id``: integer - ID of event report.
-- ``received_ts``: integer - The timestamp (in milliseconds since the unix epoch) when this report was sent.
-- ``room_id``: string - The ID of the room in which the event being reported is located.
-- ``event_id``: string - The ID of the reported event.
-- ``user_id``: string - This is the user who reported the event and wrote the reason.
-- ``reason``: string - Comment made by the ``user_id`` in this report. May be blank.
-- ``content``: object - Content of reported event.
-
-  - ``reason``: string - Comment made by the ``user_id`` in this report. May be blank.
-  - ``score``: integer - Content is reported based upon a negative score, where -100 is "most offensive" and 0 is "inoffensive".
-
-- ``sender``: string - This is the ID of the user who sent the original message/event that was reported.
-- ``room_alias``: string - The alias of the room. ``null`` if the room does not have a canonical alias set.
-- ``event_json``: object - Details of the original event that was reported.
-- ``next_token``: integer - Indication for pagination. See above.
-- ``total``: integer - Total number of event reports related to the query (``user_id`` and ``room_id``).
-

docs/admin_api/media_admin_api.md

@@ -6,10 +6,9 @@ The API is:
 ```
 GET /_synapse/admin/v1/room/<room_id>/media
 ```
-To use it, you will need to authenticate by providing an `access_token` for a
-server admin: see [README.rst](README.rst).
+including an `access_token` of a server admin.
 
-The API returns a JSON body like the following:
+It returns a JSON body like the following:
 ```
 {
     "local": [
@@ -100,3 +99,4 @@ Response:
   "num_quarantined": 10  # The number of media items successfully quarantined
 }
 ```
+

docs/admin_api/purge_history_api.rst

@@ -15,8 +15,7 @@ The API is:
 
 ``POST /_synapse/admin/v1/purge_history/<room_id>[/<event_id>]``
 
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
+including an ``access_token`` of a server admin.
 
 By default, events sent by local users are not deleted, as they may represent
 the only copies of this content in existence. (Events sent by remote users are
@@ -55,10 +54,8 @@ It is possible to poll for updates on recent purges with a second API;
 
 ``GET /_synapse/admin/v1/purge_history_status/<purge_id>``
 
-Again, you will need to authenticate by providing an ``access_token`` for a
-server admin.
-
-This API returns a JSON body like the following:
+(again, with a suitable ``access_token``). This API returns a JSON body like
+the following:
 
 .. code:: json
 

docs/admin_api/purge_remote_media.rst

@@ -6,15 +6,12 @@ media.
 
 The API is::
 
-    POST /_synapse/admin/v1/purge_media_cache?before_ts=<unix_timestamp_in_ms>
+    POST /_synapse/admin/v1/purge_media_cache?before_ts=<unix_timestamp_in_ms>&access_token=<access_token>
 
     {}
 
-\... which will remove all cached media that was last accessed before
+Which will remove all cached media that was last accessed before
 ``<unix_timestamp_in_ms>``.
 
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
 If the user re-requests purged remote media, synapse will re-request the media
 from the originating server.

docs/admin_api/purge_room.md

@@ -5,8 +5,6 @@ This API will remove all trace of a room from your database.
 
 All local users must have left the room before it can be removed.
 
-See also: [Delete Room API](rooms.md#delete-room-api)
-
 The API is:
 
 ```

docs/admin_api/room_membership.md

@@ -1,35 +0,0 @@
-# Edit Room Membership API
-
-This API allows an administrator to join an user account with a given `user_id`
-to a room with a given `room_id_or_alias`. You can only modify the membership of
-local users. The server administrator must be in the room and have permission to
-invite users.
-
-## Parameters
-
-The following parameters are available:
-
-* `user_id` - Fully qualified user: for example, `@user:server.com`.
-* `room_id_or_alias` - The room identifier or alias to join: for example,
-  `!636q39766251:server.com`.
-
-## Usage
-
-```
-POST /_synapse/admin/v1/join/<room_id_or_alias>
-
-{
-  "user_id": "@user:server.com"
-}
-```
-
-To use it, you will need to authenticate by providing an `access_token` for a
-server admin: see [README.rst](README.rst).
-
-Response:
-
-```
-{
-  "room_id": "!636q39766251:server.com"
-}
-```

docs/admin_api/rooms.md

@@ -11,21 +11,8 @@ The following query parameters are available:
 * `from` - Offset in the returned list. Defaults to `0`.
 * `limit` - Maximum amount of rooms to return. Defaults to `100`.
 * `order_by` - The method in which to sort the returned list of rooms. Valid values are:
-  - `alphabetical` - Same as `name`. This is deprecated.
-  - `size` - Same as `joined_members`. This is deprecated.
-  - `name` - Rooms are ordered alphabetically by room name. This is the default.
-  - `canonical_alias` - Rooms are ordered alphabetically by main alias address of the room.
-  - `joined_members` - Rooms are ordered by the number of members. Largest to smallest.
-  - `joined_local_members` - Rooms are ordered by the number of local members. Largest to smallest.
-  - `version` - Rooms are ordered by room version. Largest to smallest.
-  - `creator` - Rooms are ordered alphabetically by creator of the room.
-  - `encryption` - Rooms are ordered alphabetically by the end-to-end encryption algorithm.
-  - `federatable` - Rooms are ordered by whether the room is federatable.
-  - `public` - Rooms are ordered by visibility in room list.
-  - `join_rules` - Rooms are ordered alphabetically by join rules of the room.
-  - `guest_access` - Rooms are ordered alphabetically by guest access option of the room.
-  - `history_visibility` - Rooms are ordered alphabetically by visibility of history of the room.
-  - `state_events` - Rooms are ordered by number of state events. Largest to smallest.
+  - `alphabetical` - Rooms are ordered alphabetically by room name. This is the default.
+  - `size` - Rooms are ordered by the number of members. Largest to smallest.
 * `dir` - Direction of room order. Either `f` for forwards or `b` for backwards. Setting
           this value to `b` will reverse the above sort order. Defaults to `f`.
 * `search_term` - Filter rooms by their room name. Search term can be contained in any
@@ -39,16 +26,6 @@ The following fields are possible in the JSON response body:
     - `name` - The name of the room.
     - `canonical_alias` - The canonical (main) alias address of the room.
     - `joined_members` - How many users are currently in the room.
-    - `joined_local_members` - How many local users are currently in the room.
-    - `version` - The version of the room as a string.
-    - `creator` - The `user_id` of the room creator.
-    - `encryption` - Algorithm of end-to-end encryption of messages. Is `null` if encryption is not active.
-    - `federatable` - Whether users on other servers can join this room.
-    - `public` - Whether the room is visible in room directory.
-    - `join_rules` - The type of rules used for users wishing to join this room. One of: ["public", "knock", "invite", "private"].
-    - `guest_access` - Whether guests can join the room. One of: ["can_join", "forbidden"].
-    - `history_visibility` - Who can see the room history. One of: ["invited", "joined", "shared", "world_readable"].
-    - `state_events` - Total number of state_events of a room. Complexity of the room.
 * `offset` - The current pagination offset in rooms. This parameter should be
              used instead of `next_token` for room offset as `next_token` is
              not intended to be parsed.
@@ -83,34 +60,14 @@ Response:
       "room_id": "!OGEhHVWSdvArJzumhm:matrix.org",
       "name": "Matrix HQ",
       "canonical_alias": "#matrix:matrix.org",
-      "joined_members": 8326,
-      "joined_local_members": 2,
-      "version": "1",
-      "creator": "@foo:matrix.org",
-      "encryption": null,
-      "federatable": true,
-      "public": true,
-      "join_rules": "invite",
-      "guest_access": null,
-      "history_visibility": "shared",
-      "state_events": 93534
+      "joined_members": 8326
     },
     ... (8 hidden items) ...
     {
       "room_id": "!xYvNcQPhnkrdUmYczI:matrix.org",
       "name": "This Week In Matrix (TWIM)",
       "canonical_alias": "#twim:matrix.org",
-      "joined_members": 314,
-      "joined_local_members": 20,
-      "version": "4",
-      "creator": "@foo:matrix.org",
-      "encryption": "m.megolm.v1.aes-sha2",
-      "federatable": true,
-      "public": false,
-      "join_rules": "invite",
-      "guest_access": null,
-      "history_visibility": "shared",
-      "state_events": 8345
+      "joined_members": 314
     }
   ],
   "offset": 0,
@@ -135,17 +92,7 @@ Response:
       "room_id": "!xYvNcQPhnkrdUmYczI:matrix.org",
       "name": "This Week In Matrix (TWIM)",
       "canonical_alias": "#twim:matrix.org",
-      "joined_members": 314,
-      "joined_local_members": 20,
-      "version": "4",
-      "creator": "@foo:matrix.org",
-      "encryption": "m.megolm.v1.aes-sha2",
-      "federatable": true,
-      "public": false,
-      "join_rules": "invite",
-      "guest_access": null,
-      "history_visibility": "shared",
-      "state_events": 8
+      "joined_members": 314
     }
   ],
   "offset": 0,
@@ -170,34 +117,14 @@ Response:
       "room_id": "!OGEhHVWSdvArJzumhm:matrix.org",
       "name": "Matrix HQ",
       "canonical_alias": "#matrix:matrix.org",
-      "joined_members": 8326,
-      "joined_local_members": 2,
-      "version": "1",
-      "creator": "@foo:matrix.org",
-      "encryption": null,
-      "federatable": true,
-      "public": true,
-      "join_rules": "invite",
-      "guest_access": null,
-      "history_visibility": "shared",
-      "state_events": 93534
+      "joined_members": 8326
     },
     ... (98 hidden items) ...
     {
       "room_id": "!xYvNcQPhnkrdUmYczI:matrix.org",
       "name": "This Week In Matrix (TWIM)",
       "canonical_alias": "#twim:matrix.org",
-      "joined_members": 314,
-      "joined_local_members": 20,
-      "version": "4",
-      "creator": "@foo:matrix.org",
-      "encryption": "m.megolm.v1.aes-sha2",
-      "federatable": true,
-      "public": false,
-      "join_rules": "invite",
-      "guest_access": null,
-      "history_visibility": "shared",
-      "state_events": 8345
+      "joined_members": 314
     }
   ],
   "offset": 0,
@@ -227,16 +154,6 @@ Response:
       "name": "Music Theory",
       "canonical_alias": "#musictheory:matrix.org",
       "joined_members": 127
-      "joined_local_members": 2,
-      "version": "1",
-      "creator": "@foo:matrix.org",
-      "encryption": null,
-      "federatable": true,
-      "public": true,
-      "join_rules": "invite",
-      "guest_access": null,
-      "history_visibility": "shared",
-      "state_events": 93534
     },
     ... (48 hidden items) ...
     {
@@ -244,16 +161,6 @@ Response:
       "name": "weechat-matrix",
       "canonical_alias": "#weechat-matrix:termina.org.uk",
       "joined_members": 137
-      "joined_local_members": 20,
-      "version": "4",
-      "creator": "@foo:termina.org.uk",
-      "encryption": null,
-      "federatable": true,
-      "public": true,
-      "join_rules": "invite",
-      "guest_access": null,
-      "history_visibility": "shared",
-      "state_events": 8345
     }
   ],
   "offset": 100,
@@ -264,192 +171,3 @@ Response:
 
 Once the `next_token` parameter is no longer present, we know we've reached the
 end of the list.
-
-# DRAFT: Room Details API
-
-The Room Details admin API allows server admins to get all details of a room.
-
-This API is still a draft and details might change!
-
-The following fields are possible in the JSON response body:
-
-* `room_id` - The ID of the room.
-* `name` - The name of the room.
-* `topic` - The topic of the room.
-* `avatar` - The `mxc` URI to the avatar of the room.
-* `canonical_alias` - The canonical (main) alias address of the room.
-* `joined_members` - How many users are currently in the room.
-* `joined_local_members` - How many local users are currently in the room.
-* `version` - The version of the room as a string.
-* `creator` - The `user_id` of the room creator.
-* `encryption` - Algorithm of end-to-end encryption of messages. Is `null` if encryption is not active.
-* `federatable` - Whether users on other servers can join this room.
-* `public` - Whether the room is visible in room directory.
-* `join_rules` - The type of rules used for users wishing to join this room. One of: ["public", "knock", "invite", "private"].
-* `guest_access` - Whether guests can join the room. One of: ["can_join", "forbidden"].
-* `history_visibility` - Who can see the room history. One of: ["invited", "joined", "shared", "world_readable"].
-* `state_events` - Total number of state_events of a room. Complexity of the room.
-
-## Usage
-
-A standard request:
-
-```
-GET /_synapse/admin/v1/rooms/<room_id>
-
-{}
-```
-
-Response:
-
-```
-{
-  "room_id": "!mscvqgqpHYjBGDxNym:matrix.org",
-  "name": "Music Theory",
-  "avatar": "mxc://matrix.org/AQDaVFlbkQoErdOgqWRgiGSV",
-  "topic": "Theory, Composition, Notation, Analysis",
-  "canonical_alias": "#musictheory:matrix.org",
-  "joined_members": 127
-  "joined_local_members": 2,
-  "version": "1",
-  "creator": "@foo:matrix.org",
-  "encryption": null,
-  "federatable": true,
-  "public": true,
-  "join_rules": "invite",
-  "guest_access": null,
-  "history_visibility": "shared",
-  "state_events": 93534
-}
-```
-
-# Room Members API
-
-The Room Members admin API allows server admins to get a list of all members of a room.
-
-The response includes the following fields:
-
-* `members` - A list of all the members that are present in the room, represented by their ids.
-* `total` - Total number of members in the room.
-
-## Usage
-
-A standard request:
-
-```
-GET /_synapse/admin/v1/rooms/<room_id>/members
-
-{}
-```
-
-Response:
-
-```
-{
-  "members": [
-    "@foo:matrix.org",
-    "@bar:matrix.org",
-    "@foobar:matrix.org
-    ],
-  "total": 3
-}
-```
-
-# Delete Room API
-
-The Delete Room admin API allows server admins to remove rooms from server
-and block these rooms.
-It is a combination and improvement of "[Shutdown room](shutdown_room.md)"
-and "[Purge room](purge_room.md)" API.
-
-Shuts down a room. Moves all local users and room aliases automatically to a
-new room if `new_room_user_id` is set. Otherwise local users only
-leave the room without any information.
-
-The new room will be created with the user specified by the `new_room_user_id` parameter
-as room administrator and will contain a message explaining what happened. Users invited
-to the new room will have power level `-10` by default, and thus be unable to speak.
-
-If `block` is `True` it prevents new joins to the old room.
-
-This API will remove all trace of the old room from your database after removing
-all local users. If `purge` is `true` (the default), all traces of the old room will
-be removed from your database after removing all local users. If you do not want
-this to happen, set `purge` to `false`.
-Depending on the amount of history being purged a call to the API may take
-several minutes or longer.
-
-The local server will only have the power to move local user and room aliases to
-the new room. Users on other servers will be unaffected.
-
-The API is:
-
-```json
-POST /_synapse/admin/v1/rooms/<room_id>/delete
-```
-
-with a body of:
-```json
-{
-    "new_room_user_id": "@someuser:example.com",
-    "room_name": "Content Violation Notification",
-    "message": "Bad Room has been shutdown due to content violations on this server. Please review our Terms of Service.",
-    "block": true,
-    "purge": true
-}
-```
-
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see [README.rst](README.rst).
-
-A response body like the following is returned:
-
-```json
-{
-    "kicked_users": [
-        "@foobar:example.com"
-    ],
-    "failed_to_kick_users": [],
-    "local_aliases": [
-        "#badroom:example.com",
-        "#evilsaloon:example.com"
-    ],
-    "new_room_id": "!newroomid:example.com"
-}
-```
-
-## Parameters
-
-The following parameters should be set in the URL:
-
-* `room_id` - The ID of the room.
-
-The following JSON body parameters are available:
-
-* `new_room_user_id` - Optional. If set, a new room will be created with this user ID
-      as the creator and admin, and all users in the old room will be moved into that
-      room. If not set, no new room will be created and the users will just be removed
-      from the old room. The user ID must be on the local server, but does not necessarily
-      have to belong to a registered user.
-* `room_name` - Optional. A string representing the name of the room that new users will be
-                invited to. Defaults to `Content Violation Notification`
-* `message` - Optional. A string containing the first message that will be sent as
-              `new_room_user_id` in the new room. Ideally this will clearly convey why the
-               original room was shut down. Defaults to `Sharing illegal content on this server
-               is not permitted and rooms in violation will be blocked.`
-* `block` - Optional. If set to `true`, this room will be added to a blocking list, preventing
-            future attempts to join the room. Defaults to `false`.
-* `purge` - Optional. If set to `true`, it will remove all traces of the room from your database.
-            Defaults to `true`.
-
-The JSON body must not be empty. The body must be at least `{}`.
-
-## Response
-
-The following fields are returned in the JSON response body:
-
-* `kicked_users` - An array of users (`user_id`) that were kicked.
-* `failed_to_kick_users` - An array of users (`user_id`) that that were not kicked.
-* `local_aliases` - An array of strings representing the local aliases that were migrated from
-                    the old room to the new.
-* `new_room_id` - A string representing the room ID of the new room.

docs/admin_api/shutdown_room.md

@@ -10,8 +10,6 @@ disallow any further invites or joins.
 The local server will only have the power to move local user and room aliases to
 the new room. Users on other servers will be unaffected.
 
-See also: [Delete Room API](rooms.md#delete-room-api)
-
 ## API
 
 You will need to authenticate with an access token for an admin user.
@@ -33,7 +31,7 @@ You will need to authenticate with an access token for an admin user.
 * `message` - Optional. A string containing the first message that will be sent as
               `new_room_user_id` in the new room. Ideally this will clearly convey why the
                original room was shut down.
-
+              
 If not specified, the default value of `room_name` is "Content Violation
 Notification". The default value of `message` is "Sharing illegal content on
 othis server is not permitted and rooms in violation will be blocked."
@@ -72,30 +70,3 @@ Response:
     "new_room_id": "!newroomid:example.com",
 },
 ```
-
-## Undoing room shutdowns
-
-*Note*: This guide may be outdated by the time you read it. By nature of room shutdowns being performed at the database level,
-the structure can and does change without notice.
-
-First, it's important to understand that a room shutdown is very destructive. Undoing a shutdown is not as simple as pretending it
-never happened - work has to be done to move forward instead of resetting the past. In fact, in some cases it might not be possible
-to recover at all:
-
-* If the room was invite-only, your users will need to be re-invited.
-* If the room no longer has any members at all, it'll be impossible to rejoin.
-* The first user to rejoin will have to do so via an alias on a different server.
-
-With all that being said, if you still want to try and recover the room:
-
-1. For safety reasons, shut down Synapse.
-2. In the database, run `DELETE FROM blocked_rooms WHERE room_id = '!example:example.org';`
-   * For caution: it's recommended to run this in a transaction: `BEGIN; DELETE ...;`, verify you got 1 result, then `COMMIT;`.
-   * The room ID is the same one supplied to the shutdown room API, not the Content Violation room.
-3. Restart Synapse.
-
-You will have to manually handle, if you so choose, the following:
-
-* Aliases that would have been redirected to the Content Violation room.
-* Users that would have been booted from the room (and will have been force-joined to the Content Violation room).
-* Removal of the Content Violation room if desired.

docs/admin_api/user_admin_api.rst

@@ -1,47 +1,9 @@
-.. contents::
-
-Query User Account
-==================
-
-This API returns information about a specific user account.
-
-The api is::
-
-    GET /_synapse/admin/v2/users/<user_id>
-
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
-It returns a JSON body like the following:
-
-.. code:: json
-
-    {
-        "displayname": "User",
-        "threepids": [
-            {
-                "medium": "email",
-                "address": "<user_mail_1>"
-            },
-            {
-                "medium": "email",
-                "address": "<user_mail_2>"
-            }
-        ],
-        "avatar_url": "<avatar_url>",
-        "admin": false,
-        "deactivated": false
-    }
-
-URL parameters:
-
-- ``user_id``: fully-qualified user id: for example, ``@user:server.com``.
-
 Create or modify Account
 ========================
 
 This API allows an administrator to create or modify a user account with a
-specific ``user_id``.
+specific ``user_id``. Be aware that ``user_id`` is fully qualified: for example,
+``@user:server.com``.
 
 This api is::
 
@@ -69,36 +31,16 @@ with a body of:
         "deactivated": false
     }
 
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
-URL parameters:
-
-- ``user_id``: fully-qualified user id: for example, ``@user:server.com``.
-
-Body parameters:
-
-- ``password``, optional. If provided, the user's password is updated and all
-  devices are logged out.
-
-- ``displayname``, optional, defaults to the value of ``user_id``.
-
-- ``threepids``, optional, allows setting the third-party IDs (email, msisdn)
-  belonging to a user.
-
-- ``avatar_url``, optional, must be a
-  `MXC URI <https://matrix.org/docs/spec/client_server/r0.6.0#matrix-content-mxc-uris>`_.
-
-- ``admin``, optional, defaults to ``false``.
-
-- ``deactivated``, optional. If unspecified, deactivation state will be left
-  unchanged on existing accounts and set to ``false`` for new accounts.
+including an ``access_token`` of a server admin.
 
+The parameter ``displayname`` is optional and defaults to ``user_id``.
+The parameter ``threepids`` is optional.
+The parameter ``avatar_url`` is optional.
+The parameter ``admin`` is optional and defaults to 'false'.
+The parameter ``deactivated`` is optional and defaults to 'false'.
+The parameter ``password`` is optional. If provided the user's password is updated and all devices are logged out.
 If the user already exists then optional parameters default to the current value.
 
-In order to re-activate an account ``deactivated`` must be set to ``false``. If
-users do not login via single-sign-on, a new ``password`` must be provided.
-
 List Accounts
 =============
 
@@ -108,30 +50,17 @@ The api is::
 
     GET /_synapse/admin/v2/users?from=0&limit=10&guests=false
 
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
-The parameter ``from`` is optional but used for pagination, denoting the
-offset in the returned results. This should be treated as an opaque value and
-not explicitly set to anything other than the return value of ``next_token``
-from a previous call.
-
-The parameter ``limit`` is optional but is used for pagination, denoting the
-maximum number of items to return in this call. Defaults to ``100``.
-
-The parameter ``user_id`` is optional and filters to only return users with user IDs
-that contain this value. This parameter is ignored when using the ``name`` parameter.
-
-The parameter ``name`` is optional and filters to only return users with user ID localparts
-**or** displaynames that contain this value.
-
-The parameter ``guests`` is optional and if ``false`` will **exclude** guest users.
-Defaults to ``true`` to include guest users.
-
-The parameter ``deactivated`` is optional and if ``true`` will **include** deactivated users.
-Defaults to ``false`` to exclude deactivated users.
-
-A JSON body is returned with the following shape:
+including an ``access_token`` of a server admin.
+The parameters ``from`` and ``limit`` are required only for pagination.
+By default, a ``limit`` of 100 is used.
+The parameter ``user_id`` can be used to select only users with user ids that
+contain this value.
+The parameter ``guests=false`` can be used to exclude guest users,
+default is to include guest users.
+The parameter ``deactivated=true`` can be used to include deactivated users,
+default is to exclude deactivated users.
+If the endpoint does not return a ``next_token`` then there are no more users left.
+It returns a JSON body like the following:
 
 .. code:: json
 
@@ -143,41 +72,31 @@ A JSON body is returned with the following shape:
                 "is_guest": 0,
                 "admin": 0,
                 "user_type": null,
-                "deactivated": 0,
-                "displayname": "<User One>",
-                "avatar_url": null
+                "deactivated": 0
             }, {
                 "name": "<user_id2>",
                 "password_hash": "<password_hash2>",
                 "is_guest": 0,
                 "admin": 1,
                 "user_type": null,
-                "deactivated": 0,
-                "displayname": "<User Two>",
-                "avatar_url": "<avatar_url>"
+                "deactivated": 0
             }
         ],
-        "next_token": "100",
-        "total": 200
+        "next_token": "100"
     }
 
-To paginate, check for ``next_token`` and if present, call the endpoint again
-with ``from`` set to the value of ``next_token``. This will return a new page.
 
-If the endpoint does not return a ``next_token`` then there are no more users
-to paginate through.
+Query Account
+=============
 
-Query current sessions for a user
-=================================
-
-This API returns information about the active sessions for a specific user.
+This API returns information about a specific user account.
 
 The api is::
 
-    GET /_synapse/admin/v1/whois/<user_id>
+    GET /_synapse/admin/v1/whois/<user_id> (deprecated)
+    GET /_synapse/admin/v2/users/<user_id>
 
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
+including an ``access_token`` of a server admin.
 
 It returns a JSON body like the following:
 
@@ -214,11 +133,9 @@ Deactivate Account
 
 This API deactivates an account. It removes active access tokens, resets the
 password, and deletes third-party IDs (to prevent the user requesting a
-password reset).
-
-It can also mark the user as GDPR-erased. This means messages sent by the
-user will still be visible by anyone that was in the room when these messages
-were sent, but hidden from users joining the room afterwards.
+password reset). It can also mark the user as GDPR-erased (stopping their data
+from distributed further, and deleting it entirely if there are no other
+references to it).
 
 The api is::
 
@@ -232,10 +149,9 @@ with a body of:
         "erase": true
     }
 
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
+including an ``access_token`` of a server admin.
 
-The erase parameter is optional and defaults to ``false``.
+The erase parameter is optional and defaults to 'false'.
 An empty body may be passed for backwards compatibility.
 
 
@@ -257,8 +173,7 @@ with a body of:
        "logout_devices": true,
    }
 
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
+including an ``access_token`` of a server admin.
 
 The parameter ``new_password`` is required.
 The parameter ``logout_devices`` is optional and defaults to ``true``.
@@ -271,8 +186,7 @@ The api is::
 
     GET /_synapse/admin/v1/users/<user_id>/admin
 
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
+including an ``access_token`` of a server admin.
 
 A response body like the following is returned:
 
@@ -300,228 +214,4 @@ with a body of:
         "admin": true
     }
 
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
-
-List room memberships of an user
-================================
-Gets a list of all ``room_id`` that a specific ``user_id`` is member.
-
-The API is::
-
-  GET /_synapse/admin/v1/users/<user_id>/joined_rooms
-
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
-A response body like the following is returned:
-
-.. code:: json
-
-    {
-        "joined_rooms": [
-            "!DuGcnbhHGaSZQoNQR:matrix.org",
-            "!ZtSaPCawyWtxfWiIy:matrix.org"
-        ],
-        "total": 2
-    }
-
-**Parameters**
-
-The following parameters should be set in the URL:
-
-- ``user_id`` - fully qualified: for example, ``@user:server.com``.
-
-**Response**
-
-The following fields are returned in the JSON response body:
-
-- ``joined_rooms`` - An array of ``room_id``.
-- ``total`` - Number of rooms.
-
-
-User devices
-============
-
-List all devices
-----------------
-Gets information about all devices for a specific ``user_id``.
-
-The API is::
-
-  GET /_synapse/admin/v2/users/<user_id>/devices
-
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
-A response body like the following is returned:
-
-.. code:: json
-
-    {
-      "devices": [
-        {
-          "device_id": "QBUAZIFURK",
-          "display_name": "android",
-          "last_seen_ip": "1.2.3.4",
-          "last_seen_ts": 1474491775024,
-          "user_id": "<user_id>"
-        },
-        {
-          "device_id": "AUIECTSRND",
-          "display_name": "ios",
-          "last_seen_ip": "1.2.3.5",
-          "last_seen_ts": 1474491775025,
-          "user_id": "<user_id>"
-        }
-      ]
-    }
-
-**Parameters**
-
-The following parameters should be set in the URL:
-
-- ``user_id`` - fully qualified: for example, ``@user:server.com``.
-
-**Response**
-
-The following fields are returned in the JSON response body:
-
-- ``devices`` - An array of objects, each containing information about a device.
-  Device objects contain the following fields:
-
-  - ``device_id`` - Identifier of device.
-  - ``display_name`` - Display name set by the user for this device.
-    Absent if no name has been set.
-  - ``last_seen_ip`` - The IP address where this device was last seen.
-    (May be a few minutes out of date, for efficiency reasons).
-  - ``last_seen_ts`` - The timestamp (in milliseconds since the unix epoch) when this
-    devices was last seen. (May be a few minutes out of date, for efficiency reasons).
-  - ``user_id`` - Owner of  device.
-
-Delete multiple devices
-------------------
-Deletes the given devices for a specific ``user_id``, and invalidates
-any access token associated with them.
-
-The API is::
-
-    POST /_synapse/admin/v2/users/<user_id>/delete_devices
-
-    {
-      "devices": [
-        "QBUAZIFURK",
-        "AUIECTSRND"
-      ],
-    }
-
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
-An empty JSON dict is returned.
-
-**Parameters**
-
-The following parameters should be set in the URL:
-
-- ``user_id`` - fully qualified: for example, ``@user:server.com``.
-
-The following fields are required in the JSON request body:
-
-- ``devices`` - The list of device IDs to delete.
-
-Show a device
----------------
-Gets information on a single device, by ``device_id`` for a specific ``user_id``.
-
-The API is::
-
-    GET /_synapse/admin/v2/users/<user_id>/devices/<device_id>
-
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
-A response body like the following is returned:
-
-.. code:: json
-
-    {
-      "device_id": "<device_id>",
-      "display_name": "android",
-      "last_seen_ip": "1.2.3.4",
-      "last_seen_ts": 1474491775024,
-      "user_id": "<user_id>"
-    }
-
-**Parameters**
-
-The following parameters should be set in the URL:
-
-- ``user_id`` - fully qualified: for example, ``@user:server.com``.
-- ``device_id`` - The device to retrieve.
-
-**Response**
-
-The following fields are returned in the JSON response body:
-
-- ``device_id`` - Identifier of device.
-- ``display_name`` - Display name set by the user for this device.
-  Absent if no name has been set.
-- ``last_seen_ip`` - The IP address where this device was last seen.
-  (May be a few minutes out of date, for efficiency reasons).
-- ``last_seen_ts`` - The timestamp (in milliseconds since the unix epoch) when this
-  devices was last seen. (May be a few minutes out of date, for efficiency reasons).
-- ``user_id`` - Owner of  device.
-
-Update a device
----------------
-Updates the metadata on the given ``device_id`` for a specific ``user_id``.
-
-The API is::
-
-    PUT /_synapse/admin/v2/users/<user_id>/devices/<device_id>
-
-    {
-      "display_name": "My other phone"
-    }
-
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
-An empty JSON dict is returned.
-
-**Parameters**
-
-The following parameters should be set in the URL:
-
-- ``user_id`` - fully qualified: for example, ``@user:server.com``.
-- ``device_id`` - The device to update.
-
-The following fields are required in the JSON request body:
-
-- ``display_name`` - The new display name for this device. If not given,
-  the display name is unchanged.
-
-Delete a device
----------------
-Deletes the given ``device_id`` for a specific ``user_id``,
-and invalidates any access token associated with it.
-
-The API is::
-
-    DELETE /_synapse/admin/v2/users/<user_id>/devices/<device_id>
-
-    {}
-
-To use it, you will need to authenticate by providing an ``access_token`` for a
-server admin: see `README.rst <README.rst>`_.
-
-An empty JSON dict is returned.
-
-**Parameters**
-
-The following parameters should be set in the URL:
-
-- ``user_id`` - fully qualified: for example, ``@user:server.com``.
-- ``device_id`` - The device to delete.
+including an ``access_token`` of a server admin.

docs/application_services.md

@@ -23,13 +23,9 @@ namespaces:
   users:  # List of users we're interested in
     - exclusive: <bool>
       regex: <regex>
-      group_id: <group>
     - ...
   aliases: []  # List of aliases we're interested in
   rooms: [] # List of room ids we're interested in
 ```
 
-`exclusive`: If enabled, only this application service is allowed to register users in its namespace(s).
-`group_id`: All users of this application service are dynamically joined to this group. This is useful for e.g user organisation or flairs.
-
 See the [spec](https://matrix.org/docs/spec/application_service/unstable.html) for further details on how application services work.

docs/code_style.md

@@ -64,6 +64,8 @@ save as it takes a while and is very resource intensive.
     -   Use underscores for functions and variables.
 -   **Docstrings**: should follow the [google code
     style](https://google.github.io/styleguide/pyguide.html#38-comments-and-docstrings).
+    This is so that we can generate documentation with
+    [sphinx](http://sphinxcontrib-napoleon.readthedocs.org/en/latest/).
     See the
     [examples](http://sphinxcontrib-napoleon.readthedocs.io/en/latest/example_google.html)
     in the sphinx documentation.

docs/dev/cas.md

@@ -1,64 +0,0 @@
-# How to test CAS as a developer without a server
-
-The [django-mama-cas](https://github.com/jbittel/django-mama-cas) project is an
-easy to run CAS implementation built on top of Django.
-
-## Prerequisites
-
-1. Create a new virtualenv: `python3 -m venv <your virtualenv>`
-2. Activate your virtualenv: `source /path/to/your/virtualenv/bin/activate`
-3. Install Django and django-mama-cas:
-   ```
-   python -m pip install "django<3" "django-mama-cas==2.4.0"
-   ```
-4. Create a Django project in the current directory:
-   ```
-   django-admin startproject cas_test .
-   ```
-5. Follow the [install directions](https://django-mama-cas.readthedocs.io/en/latest/installation.html#configuring) for django-mama-cas
-6. Setup the SQLite database: `python manage.py migrate`
-7. Create a user:
-   ```
-   python manage.py createsuperuser
-   ```
-   1. Use whatever you want as the username and password.
-   2. Leave the other fields blank.
-8. Use the built-in Django test server to serve the CAS endpoints on port 8000:
-   ```
-   python manage.py runserver
-   ```
-
-You should now have a Django project configured to serve CAS authentication with
-a single user created.
-
-## Configure Synapse (and Riot) to use CAS
-
-1. Modify your `homeserver.yaml` to enable CAS and point it to your locally
-   running Django test server:
-   ```yaml
-   cas_config:
-     enabled: true
-     server_url: "http://localhost:8000"
-     service_url: "http://localhost:8081"
-     #displayname_attribute: name
-     #required_attributes:
-     #    name: value
-   ```
-2. Restart Synapse.
-
-Note that the above configuration assumes the homeserver is running on port 8081
-and that the CAS server is on port 8000, both on localhost.
-
-## Testing the configuration
-
-Then in Riot:
-
-1. Visit the login page with a Riot pointing at your homeserver.
-2. Click the Single Sign-On button.
-3. Login using the credentials created with `createsuperuser`.
-4. You should be logged in.
-
-If you want to repeat this process you'll need to manually logout first:
-
-1. http://localhost:8000/admin/
-2. Click "logout" in the top right.

docs/dev/git.md

@@ -1,148 +0,0 @@
-Some notes on how we use git
-============================
-
-On keeping the commit history clean
------------------------------------
-
-In an ideal world, our git commit history would be a linear progression of
-commits each of which contains a single change building on what came
-before. Here, by way of an arbitrary example, is the top of `git log --graph
-b2dba0607`:
-
-<img src="git/clean.png" alt="clean git graph" width="500px">
-
-Note how the commit comment explains clearly what is changing and why. Also
-note the *absence* of merge commits, as well as the absence of commits called
-things like (to pick a few culprits):
-[“pep8”](https://github.com/matrix-org/synapse/commit/84691da6c), [“fix broken
-test”](https://github.com/matrix-org/synapse/commit/474810d9d),
-[“oops”](https://github.com/matrix-org/synapse/commit/c9d72e457),
-[“typo”](https://github.com/matrix-org/synapse/commit/836358823), or [“Who's
-the president?”](https://github.com/matrix-org/synapse/commit/707374d5d).
-
-There are a number of reasons why keeping a clean commit history is a good
-thing:
-
- * From time to time, after a change lands, it turns out to be necessary to
-   revert it, or to backport it to a release branch. Those operations are
-   *much* easier when the change is contained in a single commit.
-
- * Similarly, it's much easier to answer questions like “is the fix for
-   `/publicRooms` on the release branch?” if that change consists of a single
-   commit.
-
- * Likewise: “what has changed on this branch in the last week?” is much
-   clearer without merges and “pep8” commits everywhere.
-
- * Sometimes we need to figure out where a bug got introduced, or some
-   behaviour changed. One way of doing that is with `git bisect`: pick an
-   arbitrary commit between the known good point and the known bad point, and
-   see how the code behaves. However, that strategy fails if the commit you
-   chose is the middle of someone's epic branch in which they broke the world
-   before putting it back together again.
-
-One counterargument is that it is sometimes useful to see how a PR evolved as
-it went through review cycles. This is true, but that information is always
-available via the GitHub UI (or via the little-known [refs/pull
-namespace](https://help.github.com/en/github/collaborating-with-issues-and-pull-requests/checking-out-pull-requests-locally)).
-
-
-Of course, in reality, things are more complicated than that. We have release
-branches as well as `develop` and `master`, and we deliberately merge changes
-between them. Bugs often slip through and have to be fixed later. That's all
-fine: this not a cast-iron rule which must be obeyed, but an ideal to aim
-towards.
-
-Merges, squashes, rebases: wtf?
--------------------------------
-
-Ok, so that's what we'd like to achieve. How do we achieve it?
-
-The TL;DR is: when you come to merge a pull request, you *probably* want to
-“squash and merge”:
-
-![squash and merge](git/squash.png).
-
-(This applies whether you are merging your own PR, or that of another
-contributor.)
-
-“Squash and merge”<sup id="a1">[1](#f1)</sup> takes all of the changes in the
-PR, and bundles them into a single commit. GitHub gives you the opportunity to
-edit the commit message before you confirm, and normally you should do so,
-because the default will be useless (again: `* woops typo` is not a useful
-thing to keep in the historical record).
-
-The main problem with this approach comes when you have a series of pull
-requests which build on top of one another: as soon as you squash-merge the
-first PR, you'll end up with a stack of conflicts to resolve in all of the
-others. In general, it's best to avoid this situation in the first place by
-trying not to have multiple related PRs in flight at the same time. Still,
-sometimes that's not possible and doing a regular merge is the lesser evil.
-
-Another occasion in which a regular merge makes more sense is a PR where you've
-deliberately created a series of commits each of which makes sense in its own
-right. For example: [a PR which gradually propagates a refactoring operation
-through the codebase](https://github.com/matrix-org/synapse/pull/6837), or [a
-PR which is the culmination of several other
-PRs](https://github.com/matrix-org/synapse/pull/5987). In this case the ability
-to figure out when a particular change/bug was introduced could be very useful.
-
-Ultimately: **this is not a hard-and-fast-rule**. If in doubt, ask yourself “do
-each of the commits I am about to merge make sense in their own right”, but
-remember that we're just doing our best to balance “keeping the commit history
-clean” with other factors.
-
-Git branching model
--------------------
-
-A [lot](https://nvie.com/posts/a-successful-git-branching-model/)
-[of](http://scottchacon.com/2011/08/31/github-flow.html)
-[words](https://www.endoflineblog.com/gitflow-considered-harmful) have been
-written in the past about git branching models (no really, [a
-lot](https://martinfowler.com/articles/branching-patterns.html)). I tend to
-think the whole thing is overblown. Fundamentally, it's not that
-complicated. Here's how we do it.
-
-Let's start with a picture:
-
-![branching model](git/branches.jpg)
-
-It looks complicated, but it's really not. There's one basic rule: *anyone* is
-free to merge from *any* more-stable branch to *any* less-stable branch at
-*any* time<sup id="a2">[2](#f2)</sup>. (The principle behind this is that if a
-change is good enough for the more-stable branch, then it's also good enough go
-put in a less-stable branch.)
-
-Meanwhile, merging (or squashing, as per the above) from a less-stable to a
-more-stable branch is a deliberate action in which you want to publish a change
-or a set of changes to (some subset of) the world: for example, this happens
-when a PR is landed, or as part of our release process.
-
-So, what counts as a more- or less-stable branch? A little reflection will show
-that our active branches are ordered thus, from more-stable to less-stable:
-
- * `master` (tracks our last release).
- * `release-vX.Y.Z` (the branch where we prepare the next release)<sup
-   id="a3">[3](#f3)</sup>.
- * PR branches which are targeting the release.
- * `develop` (our "mainline" branch containing our bleeding-edge).
- * regular PR branches.
-
-The corollary is: if you have a bugfix that needs to land in both
-`release-vX.Y.Z` *and* `develop`, then you should base your PR on
-`release-vX.Y.Z`, get it merged there, and then merge from `release-vX.Y.Z` to
-`develop`. (If a fix lands in `develop` and we later need it in a
-release-branch, we can of course cherry-pick it, but landing it in the release
-branch first helps reduce the chance of annoying conflicts.)
-
----
-
-<b id="f1">[1]</b>: “Squash and merge” is GitHub's term for this
-operation. Given that there is no merge involved, I'm not convinced it's the
-most intuitive name. [^](#a1)
-
-<b id="f2">[2]</b>: Well, anyone with commit access.[^](#a2)
-
-<b id="f3">[3]</b>: Very, very occasionally (I think this has happened once in
-the history of Synapse), we've had two releases in flight at once. Obviously,
-`release-v1.2.3` is more-stable than `release-v1.3.0`. [^](#a3)

docs/dev/saml.md

@@ -18,13 +18,9 @@ To make Synapse (and therefore Riot) use it:
        metadata:
          local: ["samling.xml"]   
    ```
-5. Ensure that your `homeserver.yaml` has a setting for `public_baseurl`:
-   ```yaml
-   public_baseurl: http://localhost:8080/
-   ```
-6. Run `apt-get install xmlsec1` and `pip install --upgrade --force 'pysaml2>=4.5.0'` to ensure
+5. Run `apt-get install xmlsec1` and `pip install --upgrade --force 'pysaml2>=4.5.0'` to ensure
    the dependencies are installed and ready to go.
-7. Restart Synapse.
+6. Restart Synapse.
 
 Then in Riot:
 

docs/federate.md

@@ -47,18 +47,6 @@ you invite them to. This can be caused by an incorrectly-configured reverse
 proxy: see [reverse_proxy.md](<reverse_proxy.md>) for instructions on how to correctly
 configure a reverse proxy.
 
-### Known issues
-
-**HTTP `308 Permanent Redirect` redirects are not followed**: Due to missing features
-in the HTTP library used by Synapse, 308 redirects are currently not followed by
-federating servers, which can cause `M_UNKNOWN` or `401 Unauthorized` errors. This
-may affect users who are redirecting apex-to-www (e.g. `example.com` -> `www.example.com`),
-and especially users of the Kubernetes *Nginx Ingress* module, which uses 308 redirect
-codes by default. For those Kubernetes users, [this Stackoverflow post](https://stackoverflow.com/a/52617528/5096871) 
-might be helpful. For other users, switching to a `301 Moved Permanently` code may be
-an option. 308 redirect codes will be supported properly in a future
-release of Synapse.
-
 ## Running a demo federation of Synapses
 
 If you want to get up and running quickly with a trio of homeservers in a

docs/jwt.md

@@ -1,97 +0,0 @@
-# JWT Login Type
-
-Synapse comes with a non-standard login type to support
-[JSON Web Tokens](https://en.wikipedia.org/wiki/JSON_Web_Token). In general the
-documentation for
-[the login endpoint](https://matrix.org/docs/spec/client_server/r0.6.1#login)
-is still valid (and the mechanism works similarly to the
-[token based login](https://matrix.org/docs/spec/client_server/r0.6.1#token-based)).
-
-To log in using a JSON Web Token, clients should submit a `/login` request as
-follows:
-
-```json
-{
-  "type": "org.matrix.login.jwt",
-  "token": "<jwt>"
-}
-```
-
-Note that the login type of `m.login.jwt` is supported, but is deprecated. This
-will be removed in a future version of Synapse.
-
-The `token` field should include the JSON web token with the following claims:
-
-* The `sub` (subject) claim is required and should encode the local part of the
-  user ID.
-* The expiration time (`exp`), not before time (`nbf`), and issued at (`iat`)
-  claims are optional, but validated if present.
-* The issuer (`iss`) claim is optional, but required and validated if configured.
-* The audience (`aud`) claim is optional, but required and validated if configured.
-  Providing the audience claim when not configured will cause validation to fail.
-
-In the case that the token is not valid, the homeserver must respond with
-`403 Forbidden` and an error code of `M_FORBIDDEN`.
-
-As with other login types, there are additional fields (e.g. `device_id` and
-`initial_device_display_name`) which can be included in the above request.
-
-## Preparing Synapse
-
-The JSON Web Token integration in Synapse uses the
-[`PyJWT`](https://pypi.org/project/pyjwt/) library, which must be installed
-as follows:
-
- * The relevant libraries are included in the Docker images and Debian packages
-   provided by `matrix.org` so no further action is needed.
-
- * If you installed Synapse into a virtualenv, run `/path/to/env/bin/pip
-   install synapse[pyjwt]` to install the necessary dependencies.
-
- * For other installation mechanisms, see the documentation provided by the
-   maintainer.
-
-To enable the JSON web token integration, you should then add an `jwt_config` section
-to your configuration file (or uncomment the `enabled: true` line in the
-existing section). See [sample_config.yaml](./sample_config.yaml) for some
-sample settings.
-
-## How to test JWT as a developer
-
-Although JSON Web Tokens are typically generated from an external server, the
-examples below use [PyJWT](https://pyjwt.readthedocs.io/en/latest/) directly.
-
-1.  Configure Synapse with JWT logins, note that this example uses a pre-shared
-    secret and an algorithm of HS256:
-
-    ```yaml
-    jwt_config:
-        enabled: true
-        secret: "my-secret-token"
-        algorithm: "HS256"
-    ```
-2.  Generate a JSON web token:
-
-    ```bash
-    $ pyjwt --key=my-secret-token --alg=HS256 encode sub=test-user
-    eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJ0ZXN0LXVzZXIifQ.Ag71GT8v01UO3w80aqRPTeuVPBIBZkYhNTJJ-_-zQIc
-    ```
-3.  Query for the login types and ensure `org.matrix.login.jwt` is there:
-
-    ```bash
-    curl http://localhost:8080/_matrix/client/r0/login
-    ```
-4.  Login used the generated JSON web token from above:
-
-    ```bash
-    $ curl http://localhost:8082/_matrix/client/r0/login -X POST \
-        --data '{"type":"org.matrix.login.jwt","token":"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJ0ZXN0LXVzZXIifQ.Ag71GT8v01UO3w80aqRPTeuVPBIBZkYhNTJJ-_-zQIc"}'
-    {
-        "access_token": "<access token>",
-        "device_id": "ACBDEFGHI",
-        "home_server": "localhost:8080",
-        "user_id": "@test-user:localhost:8480"
-    }
-    ```
-
-You should now be able to use the returned access token to query the client API.

docs/log_contexts.md

@@ -29,13 +29,14 @@ from synapse.logging import context         # omitted from future snippets
 def handle_request(request_id):
     request_context = context.LoggingContext()
 
-    calling_context = context.set_current_context(request_context)
+    calling_context = context.LoggingContext.current_context()
+    context.LoggingContext.set_current_context(request_context)
     try:
         request_context.request = request_id
         do_request_handling()
         logger.debug("finished")
     finally:
-        context.set_current_context(calling_context)
+        context.LoggingContext.set_current_context(calling_context)
 
 def do_request_handling():
     logger.debug("phew")  # this will be logged against request_id

docs/manhole.md

@@ -5,45 +5,8 @@ The "manhole" allows server administrators to access a Python shell on a running
 Synapse installation. This is a very powerful mechanism for administration and
 debugging.
 
-**_Security Warning_**
-
-Note that this will give administrative access to synapse to **all users** with
-shell access to the server. It should therefore **not** be enabled in
-environments where untrusted users have shell access.
-
-***
-
 To enable it, first uncomment the `manhole` listener configuration in
-`homeserver.yaml`. The configuration is slightly different if you're using docker.
-
-#### Docker config
-
-If you are using Docker, set `bind_addresses` to `['0.0.0.0']` as shown:
-
-```yaml
-listeners:
-  - port: 9000
-    bind_addresses: ['0.0.0.0']
-    type: manhole
-```
-
-When using `docker run` to start the server, you will then need to change the command to the following to include the
-`manhole` port forwarding. The `-p 127.0.0.1:9000:9000` below is important: it 
-ensures that access to the `manhole` is only possible for local users.
-
-```bash
-docker run -d --name synapse \
-    --mount type=volume,src=synapse-data,dst=/data \
-    -p 8008:8008 \
-    -p 127.0.0.1:9000:9000 \
-    matrixdotorg/synapse:latest
-```
-
-#### Native config
-
-If you are not using docker, set `bind_addresses` to `['::1', '127.0.0.1']` as shown.
-The `bind_addresses` in the example below is important: it ensures that access to the
-`manhole` is only possible for local users).
+`homeserver.yaml`:
 
 ```yaml
 listeners:
@@ -52,7 +15,12 @@ listeners:
     type: manhole
 ```
 
-#### Accessing synapse manhole
+(`bind_addresses` in the above is important: it ensures that access to the
+manhole is only possible for local users).
+
+Note that this will give administrative access to synapse to **all users** with
+shell access to the server. It should therefore **not** be enabled in
+environments where untrusted users have shell access.
 
 Then restart synapse, and point an ssh client at port 9000 on localhost, using
 the username `matrix`:
@@ -67,12 +35,9 @@ This gives a Python REPL in which `hs` gives access to the
 `synapse.server.HomeServer` object - which in turn gives access to many other
 parts of the process.
 
-Note that any call which returns a coroutine will need to be wrapped in `ensureDeferred`.
-
 As a simple example, retrieving an event from the database:
 
-```pycon
->>> from twisted.internet import defer
->>> defer.ensureDeferred(hs.get_datastore().get_event('$1416420717069yeQaw:matrix.org'))
+```
+>>> hs.get_datastore().get_event('$1416420717069yeQaw:matrix.org')
 <Deferred at 0x7ff253fc6998 current result: <FrozenEvent event_id='$1416420717069yeQaw:matrix.org', type='m.room.create', state_key=''>>
 ```

docs/message_retention_policies.md

@@ -136,34 +136,24 @@ the server's database.
 
 ### Lifetime limits
 
-Server admins can set limits on the values of `max_lifetime` to use when
-purging old events in a room. These limits can be defined as such in the
-`retention` section of the configuration file:
+**Note: this feature is mainly useful within a closed federation or on
+servers that don't federate, because there currently is no way to
+enforce these limits in an open federation.**
+
+Server admins can restrict the values their local users are allowed to
+use for both `min_lifetime` and `max_lifetime`. These limits can be
+defined as such in the `retention` section of the configuration file:
 
 ```yaml
   allowed_lifetime_min: 1d
   allowed_lifetime_max: 1y
 ```
 
-The limits are considered when running purge jobs. If necessary, the
-effective value of `max_lifetime` will be brought between
-`allowed_lifetime_min` and `allowed_lifetime_max` (inclusive).
-This means that, if the value of `max_lifetime` defined in the room's state
-is lower than `allowed_lifetime_min`, the value of `allowed_lifetime_min`
-will be used instead. Likewise, if the value of `max_lifetime` is higher
-than `allowed_lifetime_max`, the value of `allowed_lifetime_max` will be
-used instead.
-
-In the example above, we ensure Synapse never deletes events that are less
-than one day old, and that it always deletes events that are over a year
-old.
-
-If a default policy is set, and its `max_lifetime` value is lower than
-`allowed_lifetime_min` or higher than `allowed_lifetime_max`, the same
-process applies.
-
-Both parameters are optional; if one is omitted Synapse won't use it to
-adjust the effective value of `max_lifetime`.
+Here, `allowed_lifetime_min` is the lowest value a local user can set
+for both `min_lifetime` and `max_lifetime`, and `allowed_lifetime_max`
+is the highest value. Both parameters are optional (e.g. setting
+`allowed_lifetime_min` but not `allowed_lifetime_max` only enforces a
+minimum and no maximum).
 
 Like other settings in this section, these parameters can be expressed
 either as a duration or as a number of milliseconds.

docs/metrics-howto.md

@@ -27,7 +27,7 @@
     different thread to Synapse. This can make it more resilient to
     heavy load meaning metrics cannot be retrieved, and can be exposed
     to just internal networks easier. The served metrics are available
-    over HTTP only, and will be available at `/_synapse/metrics`.
+    over HTTP only, and will be available at `/`.
 
     Add a new listener to homeserver.yaml:
 
@@ -60,31 +60,6 @@
 
 1.  Restart Prometheus.
 
-## Monitoring workers
-
-To monitor a Synapse installation using
-[workers](https://github.com/matrix-org/synapse/blob/master/docs/workers.md),
-every worker needs to be monitored independently, in addition to
-the main homeserver process. This is because workers don't send
-their metrics to the main homeserver process, but expose them
-directly (if they are configured to do so).
-
-To allow collecting metrics from a worker, you need to add a
-`metrics` listener to its configuration, by adding the following
-under `worker_listeners`:
-
-```yaml
- - type: metrics
-   bind_address: ''
-   port: 9101
-```
-
-The `bind_address` and `port` parameters should be set so that
-the resulting listener can be reached by prometheus, and they
-don't clash with an existing worker.
-With this example, the worker's metrics would then be available
-on `http://127.0.0.1:9101`.
-
 ## Renaming of metrics & deprecation of old names in 1.2
 
 Synapse 1.2 updates the Prometheus metrics to match the naming

docs/openid.md

@@ -1,273 +0,0 @@
-# Configuring Synapse to authenticate against an OpenID Connect provider
-
-Synapse can be configured to use an OpenID Connect Provider (OP) for
-authentication, instead of its own local password database.
-
-Any OP should work with Synapse, as long as it supports the authorization code
-flow. There are a few options for that:
-
- - start a local OP. Synapse has been tested with [Hydra][hydra] and
-   [Dex][dex-idp].  Note that for an OP to work, it should be served under a
-   secure (HTTPS) origin.  A certificate signed with a self-signed, locally
-   trusted CA should work. In that case, start Synapse with a `SSL_CERT_FILE`
-   environment variable set to the path of the CA.
-
- - set up a SaaS OP, like [Google][google-idp], [Auth0][auth0] or
-   [Okta][okta]. Synapse has been tested with Auth0 and Google.
-
-It may also be possible to use other OAuth2 providers which provide the
-[authorization code grant type](https://tools.ietf.org/html/rfc6749#section-4.1),
-such as [Github][github-idp].
-
-[google-idp]: https://developers.google.com/identity/protocols/oauth2/openid-connect
-[auth0]: https://auth0.com/
-[okta]: https://www.okta.com/
-[dex-idp]: https://github.com/dexidp/dex
-[keycloak-idp]: https://www.keycloak.org/docs/latest/server_admin/#sso-protocols
-[hydra]: https://www.ory.sh/docs/hydra/
-[github-idp]: https://developer.github.com/apps/building-oauth-apps/authorizing-oauth-apps
-
-## Preparing Synapse
-
-The OpenID integration in Synapse uses the
-[`authlib`](https://pypi.org/project/Authlib/) library, which must be installed
-as follows:
-
- * The relevant libraries are included in the Docker images and Debian packages
-   provided by `matrix.org` so no further action is needed.
-
- * If you installed Synapse into a virtualenv, run `/path/to/env/bin/pip
-   install synapse[oidc]` to install the necessary dependencies.
-
- * For other installation mechanisms, see the documentation provided by the
-   maintainer.
-
-To enable the OpenID integration, you should then add an `oidc_config` section
-to your configuration file (or uncomment the `enabled: true` line in the
-existing section). See [sample_config.yaml](./sample_config.yaml) for some
-sample settings, as well as the text below for example configurations for
-specific providers.
-
-## Sample configs
-
-Here are a few configs for providers that should work with Synapse.
-
-### [Dex][dex-idp]
-
-[Dex][dex-idp] is a simple, open-source, certified OpenID Connect Provider.
-Although it is designed to help building a full-blown provider with an
-external database, it can be configured with static passwords in a config file.
-
-Follow the [Getting Started
-guide](https://github.com/dexidp/dex/blob/master/Documentation/getting-started.md)
-to install Dex.
-
-Edit `examples/config-dev.yaml` config file from the Dex repo to add a client:
-
-```yaml
-staticClients:
-- id: synapse
-  secret: secret
-  redirectURIs:
-  - '[synapse public baseurl]/_synapse/oidc/callback'
-  name: 'Synapse'
-```
-
-Run with `dex serve examples/config-dex.yaml`.
-
-Synapse config:
-
-```yaml
-oidc_config:
-   enabled: true
-   skip_verification: true # This is needed as Dex is served on an insecure endpoint
-   issuer: "http://127.0.0.1:5556/dex"
-   client_id: "synapse"
-   client_secret: "secret"
-   scopes: ["openid", "profile"]
-   user_mapping_provider:
-     config:
-       localpart_template: "{{ user.name }}"
-       display_name_template: "{{ user.name|capitalize }}"
-```
-### [Keycloak][keycloak-idp]
-
-[Keycloak][keycloak-idp] is an opensource IdP maintained by Red Hat. 
-
-Follow the [Getting Started Guide](https://www.keycloak.org/getting-started) to install Keycloak and set up a realm.
-
-1. Click `Clients` in the sidebar and click `Create`
-
-2. Fill in the fields as below:
-
-| Field | Value |
-|-----------|-----------|
-| Client ID | `synapse` |
-| Client Protocol | `openid-connect` |
-
-3. Click `Save`
-4. Fill in the fields as below:
-
-| Field | Value |
-|-----------|-----------|
-| Client ID | `synapse` |
-| Enabled | `On` |
-| Client Protocol | `openid-connect` |
-| Access Type | `confidential` |
-| Valid Redirect URIs | `[synapse public baseurl]/_synapse/oidc/callback` |
-
-5. Click `Save`
-6. On the Credentials tab, update the fields:
-
-| Field | Value |
-|-------|-------|
-| Client Authenticator | `Client ID and Secret` |
-
-7. Click `Regenerate Secret`
-8. Copy Secret
-
-```yaml
-oidc_config:
-   enabled: true
-   issuer: "https://127.0.0.1:8443/auth/realms/{realm_name}"
-   client_id: "synapse"
-   client_secret: "copy secret generated from above"
-   scopes: ["openid", "profile"]
-```
-### [Auth0][auth0]
-
-1. Create a regular web application for Synapse
-2. Set the Allowed Callback URLs to `[synapse public baseurl]/_synapse/oidc/callback`
-3. Add a rule to add the `preferred_username` claim.
-   <details>
-    <summary>Code sample</summary>
-
-    ```js
-    function addPersistenceAttribute(user, context, callback) {
-      user.user_metadata = user.user_metadata || {};
-      user.user_metadata.preferred_username = user.user_metadata.preferred_username || user.user_id;
-      context.idToken.preferred_username = user.user_metadata.preferred_username;
-
-      auth0.users.updateUserMetadata(user.user_id, user.user_metadata)
-        .then(function(){
-            callback(null, user, context);
-        })
-        .catch(function(err){
-            callback(err);
-        });
-    }
-    ```
-  </details>
-
-Synapse config:
-
-```yaml
-oidc_config:
-   enabled: true
-   issuer: "https://your-tier.eu.auth0.com/" # TO BE FILLED
-   client_id: "your-client-id" # TO BE FILLED
-   client_secret: "your-client-secret" # TO BE FILLED
-   scopes: ["openid", "profile"]
-   user_mapping_provider:
-     config:
-       localpart_template: "{{ user.preferred_username }}"
-       display_name_template: "{{ user.name }}"
-```
-
-### GitHub
-
-GitHub is a bit special as it is not an OpenID Connect compliant provider, but
-just a regular OAuth2 provider.
-
-The [`/user` API endpoint](https://developer.github.com/v3/users/#get-the-authenticated-user)
-can be used to retrieve information on the authenticated user. As the Synaspse
-login mechanism needs an attribute to uniquely identify users, and that endpoint
-does not return a `sub` property, an alternative `subject_claim` has to be set.
-
-1. Create a new OAuth application: https://github.com/settings/applications/new.
-2. Set the callback URL to `[synapse public baseurl]/_synapse/oidc/callback`.
-
-Synapse config:
-
-```yaml
-oidc_config:
-   enabled: true
-   discover: false
-   issuer: "https://github.com/"
-   client_id: "your-client-id" # TO BE FILLED
-   client_secret: "your-client-secret" # TO BE FILLED
-   authorization_endpoint: "https://github.com/login/oauth/authorize"
-   token_endpoint: "https://github.com/login/oauth/access_token"
-   userinfo_endpoint: "https://api.github.com/user"
-   scopes: ["read:user"]
-   user_mapping_provider:
-     config:
-       subject_claim: "id"
-       localpart_template: "{{ user.login }}"
-       display_name_template: "{{ user.name }}"
-```
-
-### [Google][google-idp]
-
-1. Set up a project in the Google API Console (see
-   https://developers.google.com/identity/protocols/oauth2/openid-connect#appsetup).
-2. add an "OAuth Client ID" for a Web Application under "Credentials".
-3. Copy the Client ID and Client Secret, and add the following to your synapse config:
-   ```yaml
-   oidc_config:
-     enabled: true
-     issuer: "https://accounts.google.com/"
-     client_id: "your-client-id" # TO BE FILLED
-     client_secret: "your-client-secret" # TO BE FILLED
-     scopes: ["openid", "profile"]
-     user_mapping_provider:
-       config:
-         localpart_template: "{{ user.given_name|lower }}"
-         display_name_template: "{{ user.name }}"
-   ```
-4. Back in the Google console, add this Authorized redirect URI: `[synapse
-   public baseurl]/_synapse/oidc/callback`.
-
-### Twitch
-
-1. Setup a developer account on [Twitch](https://dev.twitch.tv/)
-2. Obtain the OAuth 2.0 credentials by [creating an app](https://dev.twitch.tv/console/apps/)
-3. Add this OAuth Redirect URL: `[synapse public baseurl]/_synapse/oidc/callback`
-
-Synapse config:
-
-```yaml
-oidc_config:
-  enabled: true
-  issuer: "https://id.twitch.tv/oauth2/"
-  client_id: "your-client-id" # TO BE FILLED
-  client_secret: "your-client-secret" # TO BE FILLED
-  client_auth_method: "client_secret_post"
-  user_mapping_provider:
-    config:
-      localpart_template: "{{ user.preferred_username }}"
-      display_name_template: "{{ user.name }}"
-```
-
-### GitLab
-
-1. Create a [new application](https://gitlab.com/profile/applications).
-2. Add the `read_user` and `openid` scopes.
-3. Add this Callback URL: `[synapse public baseurl]/_synapse/oidc/callback`
-
-Synapse config:
-
-```yaml
-oidc_config:
-  enabled: true
-  issuer: "https://gitlab.com/"
-  client_id: "your-client-id" # TO BE FILLED
-  client_secret: "your-client-secret" # TO BE FILLED
-  client_auth_method: "client_secret_post"
-  scopes: ["openid", "read_user"]
-  user_profile_method: "userinfo_endpoint"
-  user_mapping_provider:
-    config:
-      localpart_template: '{{ user.nickname }}'
-      display_name_template: '{{ user.name }}'
-```

docs/password_auth_providers.md

@@ -9,114 +9,108 @@ into Synapse, and provides a number of methods by which it can integrate
 with the authentication system.
 
 This document serves as a reference for those looking to implement their
-own password auth providers. Additionally, here is a list of known
-password auth provider module implementations:
-
-* [matrix-synapse-ldap3](https://github.com/matrix-org/matrix-synapse-ldap3/)
-* [matrix-synapse-shared-secret-auth](https://github.com/devture/matrix-synapse-shared-secret-auth)
-* [matrix-synapse-rest-password-provider](https://github.com/ma1uta/matrix-synapse-rest-password-provider)
+own password auth providers.
 
 ## Required methods
 
 Password auth provider classes must provide the following methods:
 
-* `parse_config(config)`
-  This method is passed the `config` object for this module from the
-  homeserver configuration file.
+*class* `SomeProvider.parse_config`(*config*)
 
-  It should perform any appropriate sanity checks on the provided
-  configuration, and return an object which is then passed into
+> This method is passed the `config` object for this module from the
+> homeserver configuration file.
+>
+> It should perform any appropriate sanity checks on the provided
+> configuration, and return an object which is then passed into
+> `__init__`.
 
-  This method should have the `@staticmethod` decoration.
+*class* `SomeProvider`(*config*, *account_handler*)
 
-* `__init__(self, config, account_handler)`
-
-  The constructor is passed the config object returned by
-  `parse_config`, and a `synapse.module_api.ModuleApi` object which
-  allows the password provider to check if accounts exist and/or create
-  new ones.
+> The constructor is passed the config object returned by
+> `parse_config`, and a `synapse.module_api.ModuleApi` object which
+> allows the password provider to check if accounts exist and/or create
+> new ones.
 
 ## Optional methods
 
-Password auth provider classes may optionally provide the following methods:
+Password auth provider classes may optionally provide the following
+methods.
 
-* `get_db_schema_files(self)`
+*class* `SomeProvider.get_db_schema_files`()
 
-  This method, if implemented, should return an Iterable of
-  `(name, stream)` pairs of database schema files. Each file is applied
-  in turn at initialisation, and a record is then made in the database
-  so that it is not re-applied on the next start.
+> This method, if implemented, should return an Iterable of
+> `(name, stream)` pairs of database schema files. Each file is applied
+> in turn at initialisation, and a record is then made in the database
+> so that it is not re-applied on the next start.
 
-* `get_supported_login_types(self)`
+`someprovider.get_supported_login_types`()
 
-  This method, if implemented, should return a `dict` mapping from a
-  login type identifier (such as `m.login.password`) to an iterable
-  giving the fields which must be provided by the user in the submission
-  to [the `/login` API](https://matrix.org/docs/spec/client_server/latest#post-matrix-client-r0-login).
-  These fields are passed in the `login_dict` dictionary to `check_auth`.
+> This method, if implemented, should return a `dict` mapping from a
+> login type identifier (such as `m.login.password`) to an iterable
+> giving the fields which must be provided by the user in the submission
+> to the `/login` api. These fields are passed in the `login_dict`
+> dictionary to `check_auth`.
+>
+> For example, if a password auth provider wants to implement a custom
+> login type of `com.example.custom_login`, where the client is expected
+> to pass the fields `secret1` and `secret2`, the provider should
+> implement this method and return the following dict:
+>
+>     {"com.example.custom_login": ("secret1", "secret2")}
 
-  For example, if a password auth provider wants to implement a custom
-  login type of `com.example.custom_login`, where the client is expected
-  to pass the fields `secret1` and `secret2`, the provider should
-  implement this method and return the following dict:
+`someprovider.check_auth`(*username*, *login_type*, *login_dict*)
 
-  ```python
-  {"com.example.custom_login": ("secret1", "secret2")}
-  ```
+> This method is the one that does the real work. If implemented, it
+> will be called for each login attempt where the login type matches one
+> of the keys returned by `get_supported_login_types`.
+>
+> It is passed the (possibly UNqualified) `user` provided by the client,
+> the login type, and a dictionary of login secrets passed by the
+> client.
+>
+> The method should return a Twisted `Deferred` object, which resolves
+> to the canonical `@localpart:domain` user id if authentication is
+> successful, and `None` if not.
+>
+> Alternatively, the `Deferred` can resolve to a `(str, func)` tuple, in
+> which case the second field is a callback which will be called with
+> the result from the `/login` call (including `access_token`,
+> `device_id`, etc.)
 
-* `check_auth(self, username, login_type, login_dict)`
+`someprovider.check_3pid_auth`(*medium*, *address*, *password*)
 
-  This method does the real work. If implemented, it
-  will be called for each login attempt where the login type matches one
-  of the keys returned by `get_supported_login_types`.
+> This method, if implemented, is called when a user attempts to
+> register or log in with a third party identifier, such as email. It is
+> passed the medium (ex. "email"), an address (ex.
+> "<jdoe@example.com>") and the user's password.
+>
+> The method should return a Twisted `Deferred` object, which resolves
+> to a `str` containing the user's (canonical) User ID if
+> authentication was successful, and `None` if not.
+>
+> As with `check_auth`, the `Deferred` may alternatively resolve to a
+> `(user_id, callback)` tuple.
 
-  It is passed the (possibly unqualified) `user` field provided by the client,
-  the login type, and a dictionary of login secrets passed by the
-  client.
+`someprovider.check_password`(*user_id*, *password*)
 
-  The method should return an `Awaitable` object, which resolves
-  to the canonical `@localpart:domain` user ID if authentication is
-  successful, and `None` if not.
+> This method provides a simpler interface than
+> `get_supported_login_types` and `check_auth` for password auth
+> providers that just want to provide a mechanism for validating
+> `m.login.password` logins.
+>
+> Iif implemented, it will be called to check logins with an
+> `m.login.password` login type. It is passed a qualified
+> `@localpart:domain` user id, and the password provided by the user.
+>
+> The method should return a Twisted `Deferred` object, which resolves
+> to `True` if authentication is successful, and `False` if not.
 
-  Alternatively, the `Awaitable` can resolve to a `(str, func)` tuple, in
-  which case the second field is a callback which will be called with
-  the result from the `/login` call (including `access_token`,
-  `device_id`, etc.)
+`someprovider.on_logged_out`(*user_id*, *device_id*, *access_token*)
 
-* `check_3pid_auth(self, medium, address, password)`
-
-  This method, if implemented, is called when a user attempts to
-  register or log in with a third party identifier, such as email. It is
-  passed the medium (ex. "email"), an address (ex.
-  "<jdoe@example.com>") and the user's password.
-
-  The method should return an `Awaitable` object, which resolves
-  to a `str` containing the user's (canonical) User id if
-  authentication was successful, and `None` if not.
-
-  As with `check_auth`, the `Awaitable` may alternatively resolve to a
-  `(user_id, callback)` tuple.
-
-* `check_password(self, user_id, password)`
-
-  This method provides a simpler interface than
-  `get_supported_login_types` and `check_auth` for password auth
-  providers that just want to provide a mechanism for validating
-  `m.login.password` logins.
-
-  If implemented, it will be called to check logins with an
-  `m.login.password` login type. It is passed a qualified
-  `@localpart:domain` user id, and the password provided by the user.
-
-  The method should return an `Awaitable` object, which resolves
-  to `True` if authentication is successful, and `False` if not.
-
-* `on_logged_out(self, user_id, device_id, access_token)`
-
-  This method, if implemented, is called when a user logs out. It is
-  passed the qualified user ID, the ID of the deactivated device (if
-  any: access tokens are occasionally created without an associated
-  device ID), and the (now deactivated) access token.
-
-  It may return an `Awaitable` object; the logout request will
-  wait for the `Awaitable` to complete, but the result is ignored.
+> This method, if implemented, is called when a user logs out. It is
+> passed the qualified user ID, the ID of the deactivated device (if
+> any: access tokens are occasionally created without an associated
+> device ID), and the (now deactivated) access token.
+>
+> It may return a Twisted `Deferred` object; the logout request will
+> wait for the deferred to complete but the result is ignored.

docs/postgres.md

@@ -61,33 +61,7 @@ Note that the PostgreSQL database *must* have the correct encoding set
 
 You may need to enable password authentication so `synapse_user` can
 connect to the database. See
-<https://www.postgresql.org/docs/current/auth-pg-hba-conf.html>.
-
-If you get an error along the lines of `FATAL:  Ident authentication failed for
-user "synapse_user"`, you may need to use an authentication method other than
-`ident`:
-
-* If the `synapse_user` user has a password, add the password to the `database:`
-  section of `homeserver.yaml`. Then add the following to `pg_hba.conf`:
-
-  ```
-  host    synapse     synapse_user    ::1/128     md5  # or `scram-sha-256` instead of `md5` if you use that
-  ```
-
-* If the `synapse_user` user does not have a password, then a password doesn't
-  have to be added to `homeserver.yaml`. But the following does need to be added
-  to `pg_hba.conf`:
-
-  ```
-  host    synapse     synapse_user    ::1/128     trust
-  ```
-
-Note that line order matters in `pg_hba.conf`, so make sure that if you do add a
-new line, it is inserted before:
-
-```
-host    all         all             ::1/128     ident
-```
+<https://www.postgresql.org/docs/11/auth-pg-hba-conf.html>.
 
 ### Fixing incorrect `COLLATE` or `CTYPE`
 
@@ -98,7 +72,8 @@ underneath the database, or if a different version of the locale is used on any
 replicas.
 
 The safest way to fix the issue is to take a dump and recreate the database with
-the correct `COLLATE` and `CTYPE` parameters (as shown above). It is also possible to change the
+the correct `COLLATE` and `CTYPE` parameters (as per
+[docs/postgres.md](docs/postgres.md)). It is also possible to change the
 parameters on a live database and run a `REINDEX` on the entire database,
 however extreme care must be taken to avoid database corruption.
 
@@ -106,17 +81,6 @@ Note that the above may fail with an error about duplicate rows if corruption
 has already occurred, and such duplicate rows will need to be manually removed.
 
 
-## Fixing inconsistent sequences error
-
-Synapse uses Postgres sequences to generate IDs for various tables. A sequence
-and associated table can get out of sync if, for example, Synapse has been
-downgraded and then upgraded again.
-
-To fix the issue shut down Synapse (including any and all workers) and run the
-SQL command included in the error message. Once done Synapse should start
-successfully.
-
-
 ## Tuning Postgres
 
 The default settings should be fine for most deployments. For larger
@@ -141,41 +105,19 @@ of free memory the database host has available.
 When you are ready to start using PostgreSQL, edit the `database`
 section in your config file to match the following lines:
 
-```yaml
-database:
-  name: psycopg2
-  args:
-    user: <user>
-    password: <pass>
-    database: <db>
-    host: <host>
-    cp_min: 5
-    cp_max: 10
-```
+    database:
+        name: psycopg2
+        args:
+            user: <user>
+            password: <pass>
+            database: <db>
+            host: <host>
+            cp_min: 5
+            cp_max: 10
 
 All key, values in `args` are passed to the `psycopg2.connect(..)`
 function, except keys beginning with `cp_`, which are consumed by the
-twisted adbapi connection pool. See the [libpq
-documentation](https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-PARAMKEYWORDS)
-for a list of options which can be passed.
-
-You should consider tuning the `args.keepalives_*` options if there is any danger of
-the connection between your homeserver and database dropping, otherwise Synapse
-may block for an extended period while it waits for a response from the
-database server. Example values might be:
-
-```yaml
-# seconds of inactivity after which TCP should send a keepalive message to the server
-keepalives_idle: 10
-
-# the number of seconds after which a TCP keepalive message that is not
-# acknowledged by the server should be retransmitted
-keepalives_interval: 10
-
-# the number of TCP keepalives that can be lost before the client's connection
-# to the server is considered dead
-keepalives_count: 3
-```
+twisted adbapi connection pool.
 
 ## Porting from SQLite
 
@@ -199,9 +141,6 @@ to do step 2.
 
 It is safe to at any time kill the port script and restart it.
 
-Note that the database may take up significantly more (25% - 100% more)
-space on disk after porting to Postgres.
-
 ### Using the port script
 
 Firstly, shut down the currently running synapse server and copy its

docs/reverse_proxy.md

@@ -3,152 +3,115 @@
 It is recommended to put a reverse proxy such as
 [nginx](https://nginx.org/en/docs/http/ngx_http_proxy_module.html),
 [Apache](https://httpd.apache.org/docs/current/mod/mod_proxy_http.html),
-[Caddy](https://caddyserver.com/docs/quick-starts/reverse-proxy) or
+[Caddy](https://caddyserver.com/docs/proxy) or
 [HAProxy](https://www.haproxy.org/) in front of Synapse. One advantage
 of doing so is that it means that you can expose the default https port
 (443) to Matrix clients without needing to run Synapse with root
 privileges.
 
-**NOTE**: Your reverse proxy must not `canonicalise` or `normalise`
+> **NOTE**: Your reverse proxy must not `canonicalise` or `normalise`
 the requested URI in any way (for example, by decoding `%xx` escapes).
-Beware that Apache *will* canonicalise URIs unless you specify
+Beware that Apache *will* canonicalise URIs unless you specifify
 `nocanon`.
 
 When setting up a reverse proxy, remember that Matrix clients and other
 Matrix servers do not necessarily need to connect to your server via the
 same server name or port. Indeed, clients will use port 443 by default,
 whereas servers default to port 8448. Where these are different, we
-refer to the 'client port' and the 'federation port'. See [the Matrix
+refer to the 'client port' and the \'federation port\'. See [the Matrix
 specification](https://matrix.org/docs/spec/server_server/latest#resolving-server-names)
 for more details of the algorithm used for federation connections, and
 [delegate.md](<delegate.md>) for instructions on setting up delegation.
 
-Endpoints that are part of the standardised Matrix specification are
-located under `/_matrix`, whereas endpoints specific to Synapse are
-located under `/_synapse/client`.
-
 Let's assume that we expect clients to connect to our server at
 `https://matrix.example.com`, and other servers to connect at
 `https://example.com:8448`.  The following sections detail the configuration of
 the reverse proxy and the homeserver.
 
-## Reverse-proxy configuration examples
+## Webserver configuration examples
 
-**NOTE**: You only need one of these.
+> **NOTE**: You only need one of these.
 
 ### nginx
 
-```
-server {
-    listen 443 ssl;
-    listen [::]:443 ssl;
+        server {
+            listen 443 ssl;
+            listen [::]:443 ssl;
+            server_name matrix.example.com;
 
-    # For the federation port
-    listen 8448 ssl default_server;
-    listen [::]:8448 ssl default_server;
+            location /_matrix {
+                proxy_pass http://localhost:8008;
+                proxy_set_header X-Forwarded-For $remote_addr;
+            }
+        }
 
-    server_name matrix.example.com;
+        server {
+            listen 8448 ssl default_server;
+            listen [::]:8448 ssl default_server;
+            server_name example.com;
 
-    location ~* ^(\/_matrix|\/_synapse\/client) {
-        proxy_pass http://localhost:8008;
-        proxy_set_header X-Forwarded-For $remote_addr;
-        # Nginx by default only allows file uploads up to 1M in size
-        # Increase client_max_body_size to match max_upload_size defined in homeserver.yaml
-        client_max_body_size 50M;
-    }
-}
-```
+            location / {
+                proxy_pass http://localhost:8008;
+                proxy_set_header X-Forwarded-For $remote_addr;
+            }
+        }
 
-**NOTE**: Do not add a path after the port in `proxy_pass`, otherwise nginx will
+> **NOTE**: Do not add a `/` after the port in `proxy_pass`, otherwise nginx will
 canonicalise/normalise the URI.
 
-### Caddy 1
+### Caddy
 
-```
-matrix.example.com {
-  proxy /_matrix http://localhost:8008 {
-    transparent
-  }
+        matrix.example.com {
+          proxy /_matrix http://localhost:8008 {
+            transparent
+          }
+        }
 
-  proxy /_synapse/client http://localhost:8008 {
-    transparent
-  }
-}
-
-example.com:8448 {
-  proxy / http://localhost:8008 {
-    transparent
-  }
-}
-```
-
-### Caddy 2
-
-```
-matrix.example.com {
-  reverse_proxy /_matrix/* http://localhost:8008
-  reverse_proxy /_synapse/client/* http://localhost:8008
-}
-
-example.com:8448 {
-  reverse_proxy http://localhost:8008
-}
-```
+        example.com:8448 {
+          proxy / http://localhost:8008 {
+            transparent
+          }
+        }
 
 ### Apache
 
-```
-<VirtualHost *:443>
-    SSLEngine on
-    ServerName matrix.example.com;
+        <VirtualHost *:443>
+            SSLEngine on
+            ServerName matrix.example.com;
 
-    AllowEncodedSlashes NoDecode
-    ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
-    ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
-    ProxyPass /_synapse/client http://127.0.0.1:8008/_synapse/client nocanon
-    ProxyPassReverse /_synapse/client http://127.0.0.1:8008/_synapse/client
-</VirtualHost>
+            AllowEncodedSlashes NoDecode
+            ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
+            ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
+        </VirtualHost>
 
-<VirtualHost *:8448>
-    SSLEngine on
-    ServerName example.com;
+        <VirtualHost *:8448>
+            SSLEngine on
+            ServerName example.com;
 
-    AllowEncodedSlashes NoDecode
-    ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
-    ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
-</VirtualHost>
-```
+            AllowEncodedSlashes NoDecode
+            ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
+            ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
+        </VirtualHost>
 
-**NOTE**: ensure the  `nocanon` options are included.
-
-**NOTE 2**: It appears that Synapse is currently incompatible with the ModSecurity module for Apache (`mod_security2`). If you need it enabled for other services on your web server, you can disable it for Synapse's two VirtualHosts by including the following lines before each of the two `</VirtualHost>` above:
-
-```
-<IfModule security2_module>
-    SecRuleEngine off
-</IfModule>
-```
+> **NOTE**: ensure the  `nocanon` options are included.
 
 ### HAProxy
 
-```
-frontend https
-  bind :::443 v4v6 ssl crt /etc/ssl/haproxy/ strict-sni alpn h2,http/1.1
+        frontend https
+          bind :::443 v4v6 ssl crt /etc/ssl/haproxy/ strict-sni alpn h2,http/1.1
 
-  # Matrix client traffic
-  acl matrix-host hdr(host) -i matrix.example.com
-  acl matrix-path path_beg /_matrix
-  acl matrix-path path_beg /_synapse/client
+          # Matrix client traffic
+          acl matrix-host hdr(host) -i matrix.example.com
+          acl matrix-path path_beg /_matrix
 
-  use_backend matrix if matrix-host matrix-path
+          use_backend matrix if matrix-host matrix-path
 
-frontend matrix-federation
-  bind :::8448 v4v6 ssl crt /etc/ssl/haproxy/synapse.pem alpn h2,http/1.1
-  default_backend matrix
+        frontend matrix-federation
+          bind :::8448 v4v6 ssl crt /etc/ssl/haproxy/synapse.pem alpn h2,http/1.1
+          default_backend matrix
 
-backend matrix
-  server matrix 127.0.0.1:8008
-```
+        backend matrix
+          server matrix 127.0.0.1:8008
 
 ## Homeserver Configuration
 
@@ -159,17 +122,3 @@ client IP addresses are recorded correctly.
 Having done so, you can then use `https://matrix.example.com` (instead
 of `https://matrix.example.com:8448`) as the "Custom server" when
 connecting to Synapse from a client.
-
-
-## Health check endpoint
-
-Synapse exposes a health check endpoint for use by reverse proxies.
-Each configured HTTP listener has a `/health` endpoint which always returns
-200 OK (and doesn't get logged).
-
-## Synapse administration endpoints
-
-Endpoints for administering your Synapse instance are placed under
-`/_synapse/admin`. These require authentication through an access token of an
-admin user. However as access to these endpoints grants the caller a lot of power,
-we do not recommend exposing them to the public internet without good reason.

docs/saml_mapping_providers.md

@@ -0,0 +1,77 @@
+# SAML Mapping Providers
+
+A SAML mapping provider is a Python class (loaded via a Python module) that
+works out how to map attributes of a SAML response object to Matrix-specific
+user attributes. Details such as user ID localpart, displayname, and even avatar
+URLs are all things that can be mapped from talking to a SSO service.
+
+As an example, a SSO service may return the email address
+"john.smith@example.com" for a user, whereas Synapse will need to figure out how
+to turn that into a displayname when creating a Matrix user for this individual.
+It may choose `John Smith`, or `Smith, John [Example.com]` or any number of
+variations. As each Synapse configuration may want something different, this is
+where SAML mapping providers come into play.
+
+## Enabling Providers
+
+External mapping providers are provided to Synapse in the form of an external
+Python module. Retrieve this module from [PyPi](https://pypi.org) or elsewhere,
+then tell Synapse where to look for the handler class by editing the
+`saml2_config.user_mapping_provider.module` config option.
+
+`saml2_config.user_mapping_provider.config` allows you to provide custom
+configuration options to the module. Check with the module's documentation for
+what options it provides (if any). The options listed by default are for the
+user mapping provider built in to Synapse. If using a custom module, you should
+comment these options out and use those specified by the module instead.
+
+## Building a Custom Mapping Provider
+
+A custom mapping provider must specify the following methods:
+
+* `__init__(self, parsed_config)`
+   - Arguments:
+     - `parsed_config` - A configuration object that is the return value of the
+       `parse_config` method. You should set any configuration options needed by
+       the module here.
+* `saml_response_to_user_attributes(self, saml_response, failures)`
+    - Arguments:
+      - `saml_response` - A `saml2.response.AuthnResponse` object to extract user
+                          information from.
+      - `failures` - An `int` that represents the amount of times the returned
+                     mxid localpart mapping has failed.  This should be used
+                     to create a deduplicated mxid localpart which should be
+                     returned instead. For example, if this method returns
+                     `john.doe` as the value of `mxid_localpart` in the returned
+                     dict, and that is already taken on the homeserver, this
+                     method will be called again with the same parameters but
+                     with failures=1. The method should then return a different
+                     `mxid_localpart` value, such as `john.doe1`.
+    - This method must return a dictionary, which will then be used by Synapse
+      to build a new user. The following keys are allowed:
+       * `mxid_localpart` - Required. The mxid localpart of the new user.
+       * `displayname` - The displayname of the new user. If not provided, will default to
+                         the value of `mxid_localpart`.
+* `parse_config(config)`
+    - This method should have the `@staticmethod` decoration.
+    - Arguments:
+        - `config` - A `dict` representing the parsed content of the
+          `saml2_config.user_mapping_provider.config` homeserver config option.
+           Runs on homeserver startup. Providers should extract any option values
+           they need here.
+    - Whatever is returned will be passed back to the user mapping provider module's
+      `__init__` method during construction.
+* `get_saml_attributes(config)`
+    - This method should have the `@staticmethod` decoration.
+    - Arguments:
+        - `config` - A object resulting from a call to `parse_config`.
+    - Returns a tuple of two sets. The first set equates to the saml auth
+      response attributes that are required for the module to function, whereas
+      the second set consists of those attributes which can be used if available,
+      but are not necessary.
+
+## Synapse's Default Provider
+
+Synapse has a built-in SAML mapping provider if a custom provider isn't
+specified in the config. It is located at
+[`synapse.handlers.saml_handler.DefaultSamlMappingProvider`](../synapse/handlers/saml_handler.py).

docs/sample_log_config.yaml

@@ -11,33 +11,24 @@ formatters:
     precise:
         format: '%(asctime)s - %(name)s - %(lineno)d - %(levelname)s - %(request)s - %(message)s'
 
+filters:
+    context:
+        (): synapse.logging.context.LoggingContextFilter
+        request: ""
+
 handlers:
     file:
-        class: logging.handlers.TimedRotatingFileHandler
+        class: logging.handlers.RotatingFileHandler
         formatter: precise
         filename: /var/log/matrix-synapse/homeserver.log
-        when: midnight
-        backupCount: 3  # Does not include the current log file.
+        maxBytes: 104857600
+        backupCount: 10
+        filters: [context]
         encoding: utf8
-
-    # Default to buffering writes to log file for efficiency. This means that
-    # will be a delay for INFO/DEBUG logs to get written, but WARNING/ERROR
-    # logs will still be flushed immediately.
-    buffer:
-        class: logging.handlers.MemoryHandler
-        target: file
-        # The capacity is the number of log lines that are buffered before
-        # being written to disk. Increasing this will lead to better
-        # performance, at the expensive of it taking longer for log lines to
-        # be written to disk.
-        capacity: 10
-        flushLevel: 30  # Flush for WARNING logs as well
-
-    # A handler that writes logs to stderr. Unused by default, but can be used
-    # instead of "buffer" and "file" in the logger handlers.
     console:
         class: logging.StreamHandler
         formatter: precise
+        filters: [context]
 
 loggers:
     synapse.storage.SQL:
@@ -45,23 +36,8 @@ loggers:
         # information such as access tokens.
         level: INFO
 
-    twisted:
-        # We send the twisted logging directly to the file handler,
-        # to work around https://github.com/matrix-org/synapse/issues/3471
-        # when using "buffer" logger. Use "console" to log to stderr instead.
-        handlers: [file]
-        propagate: false
-
 root:
     level: INFO
-
-    # Write logs to the `buffer` handler, which will buffer them together in memory,
-    # then write them to a file.
-    #
-    # Replace "buffer" with "console" to log to stderr instead. (Note that you'll
-    # also need to update the configuation for the `twisted` logger above, in
-    # this case.)
-    #
-    handlers: [buffer]
+    handlers: [file, console]
 
 disable_existing_loggers: false

docs/spam_checker.md

@@ -11,7 +11,7 @@ able to be imported by the running Synapse.
 The Python class is instantiated with two objects:
 
 * Any configuration (see below).
-* An instance of `synapse.module_api.ModuleApi`.
+* An instance of `synapse.spam_checker_api.SpamCheckerApi`.
 
 It then implements methods which return a boolean to alter behavior in Synapse.
 
@@ -26,8 +26,11 @@ well as some specific methods:
 The details of the each of these methods (as well as their inputs and outputs)
 are documented in the `synapse.events.spamcheck.SpamChecker` class.
 
-The `ModuleApi` class provides a way for the custom spam checker class to
-call back into the homeserver internals.
+The `SpamCheckerApi` class provides a way for the custom spam checker class to
+call back into the homeserver internals. It currently implements the following
+methods:
+
+* `get_state_events_in_room`
 
 ### Example
 
@@ -61,12 +64,10 @@ class ExampleSpamChecker:
 Modify the `spam_checker` section of your `homeserver.yaml` in the following
 manner:
 
-Create a list entry with the keys `module` and `config`.
+`module` should point to the fully qualified Python class that implements your
+custom logic, e.g. `my_module.ExampleSpamChecker`.
 
-* `module` should point to the fully qualified Python class that implements your
-  custom logic, e.g. `my_module.ExampleSpamChecker`.
-
-* `config` is a dictionary that gets passed to the spam checker class.
+`config` is a dictionary that gets passed to the spam checker class.
 
 ### Example
 
@@ -74,15 +75,12 @@ This section might look like:
 
 ```yaml
 spam_checker:
-  - module: my_module.ExampleSpamChecker
-    config:
-      # Enable or disable a specific option in ExampleSpamChecker.
-      my_custom_option: true
+  module: my_module.ExampleSpamChecker
+  config:
+    # Enable or disable a specific option in ExampleSpamChecker.
+    my_custom_option: true
 ```
 
-More spam checkers can be added in tandem by appending more items to the list. An
-action is blocked when at least one of the configured spam checkers flags it.
-
 ## Examples
 
 The [Mjolnir](https://github.com/matrix-org/mjolnir) project is a full fledged

docs/sphinx/README.rst

@@ -0,0 +1 @@
+TODO: how (if at all) is this actually maintained?

docs/sphinx/conf.py

@@ -0,0 +1,271 @@
+# -*- coding: utf-8 -*-
+#
+# Synapse documentation build configuration file, created by
+# sphinx-quickstart on Tue Jun 10 17:31:02 2014.
+#
+# This file is execfile()d with the current directory set to its
+# containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys
+import os
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+sys.path.insert(0, os.path.abspath(".."))
+
+# -- General configuration ------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    "sphinx.ext.autodoc",
+    "sphinx.ext.intersphinx",
+    "sphinx.ext.coverage",
+    "sphinx.ext.ifconfig",
+    "sphinxcontrib.napoleon",
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ["_templates"]
+
+# The suffix of source filenames.
+source_suffix = ".rst"
+
+# The encoding of source files.
+# source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = "index"
+
+# General information about the project.
+project = "Synapse"
+copyright = (
+    "Copyright 2014-2017 OpenMarket Ltd, 2017 Vector Creations Ltd, 2017 New Vector Ltd"
+)
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = "1.0"
+# The full version, including alpha/beta/rc tags.
+release = "1.0"
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+# language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+# today = ''
+# Else, today_fmt is used as the format for a strftime call.
+# today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = ["_build"]
+
+# The reST default role (used for this markup: `text`) to use for all
+# documents.
+# default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+# add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+# add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+# show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = "sphinx"
+
+# A list of ignored prefixes for module index sorting.
+# modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+# keep_warnings = False
+
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+html_theme = "default"
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+# html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+# html_theme_path = []
+
+# The name for this set of Sphinx documents.  If None, it defaults to
+# "<project> v<release> documentation".
+# html_title = None
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+# html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+# html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+# html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ["_static"]
+
+# Add any extra paths that contain custom files (such as robots.txt or
+# .htaccess) here, relative to this directory. These files are copied
+# directly to the root of the documentation.
+# html_extra_path = []
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+# html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+# html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+# html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+# html_additional_pages = {}
+
+# If false, no module index is generated.
+# html_domain_indices = True
+
+# If false, no index is generated.
+# html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+# html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+# html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+# html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+# html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+# html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+# html_file_suffix = None
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = "Synapsedoc"
+
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+    # The paper size ('letterpaper' or 'a4paper').
+    #'papersize': 'letterpaper',
+    # The font size ('10pt', '11pt' or '12pt').
+    #'pointsize': '10pt',
+    # Additional stuff for the LaTeX preamble.
+    #'preamble': '',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [("index", "Synapse.tex", "Synapse Documentation", "TNG", "manual")]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+# latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+# latex_use_parts = False
+
+# If true, show page references after internal links.
+# latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+# latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+# latex_appendices = []
+
+# If false, no module index is generated.
+# latex_domain_indices = True
+
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [("index", "synapse", "Synapse Documentation", ["TNG"], 1)]
+
+# If true, show URL addresses after external links.
+# man_show_urls = False
+
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (
+        "index",
+        "Synapse",
+        "Synapse Documentation",
+        "TNG",
+        "Synapse",
+        "One line description of project.",
+        "Miscellaneous",
+    )
+]
+
+# Documents to append as an appendix to all manuals.
+# texinfo_appendices = []
+
+# If false, no module index is generated.
+# texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+# texinfo_show_urls = 'footnote'
+
+# If true, do not generate a @detailmenu in the "Top" node's menu.
+# texinfo_no_detailmenu = False
+
+
+# Example configuration for intersphinx: refer to the Python standard library.
+intersphinx_mapping = {"http://docs.python.org/": None}
+
+napoleon_include_special_with_doc = True
+napoleon_use_ivar = True

docs/sphinx/index.rst

@@ -0,0 +1,20 @@
+.. Synapse documentation master file, created by
+   sphinx-quickstart on Tue Jun 10 17:31:02 2014.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+Welcome to Synapse's documentation!
+===================================
+
+Contents:
+
+.. toctree::
+   synapse
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+

docs/sphinx/modules.rst

@@ -0,0 +1,7 @@
+synapse
+=======
+
+.. toctree::
+   :maxdepth: 4
+
+   synapse

docs/sphinx/synapse.api.auth.rst

@@ -0,0 +1,7 @@
+synapse.api.auth module
+=======================
+
+.. automodule:: synapse.api.auth
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.constants.rst

@@ -0,0 +1,7 @@
+synapse.api.constants module
+============================
+
+.. automodule:: synapse.api.constants
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.dbobjects.rst

@@ -0,0 +1,7 @@
+synapse.api.dbobjects module
+============================
+
+.. automodule:: synapse.api.dbobjects
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.errors.rst

@@ -0,0 +1,7 @@
+synapse.api.errors module
+=========================
+
+.. automodule:: synapse.api.errors
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.event_stream.rst

@@ -0,0 +1,7 @@
+synapse.api.event_stream module
+===============================
+
+.. automodule:: synapse.api.event_stream
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.events.factory.rst

@@ -0,0 +1,7 @@
+synapse.api.events.factory module
+=================================
+
+.. automodule:: synapse.api.events.factory
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.events.room.rst

@@ -0,0 +1,7 @@
+synapse.api.events.room module
+==============================
+
+.. automodule:: synapse.api.events.room
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.events.rst

@@ -0,0 +1,18 @@
+synapse.api.events package
+==========================
+
+Submodules
+----------
+
+.. toctree::
+
+   synapse.api.events.factory
+   synapse.api.events.room
+
+Module contents
+---------------
+
+.. automodule:: synapse.api.events
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.handlers.events.rst

@@ -0,0 +1,7 @@
+synapse.api.handlers.events module
+==================================
+
+.. automodule:: synapse.api.handlers.events
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.handlers.factory.rst

@@ -0,0 +1,7 @@
+synapse.api.handlers.factory module
+===================================
+
+.. automodule:: synapse.api.handlers.factory
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.handlers.federation.rst

@@ -0,0 +1,7 @@
+synapse.api.handlers.federation module
+======================================
+
+.. automodule:: synapse.api.handlers.federation
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.handlers.register.rst

@@ -0,0 +1,7 @@
+synapse.api.handlers.register module
+====================================
+
+.. automodule:: synapse.api.handlers.register
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.handlers.room.rst

@@ -0,0 +1,7 @@
+synapse.api.handlers.room module
+================================
+
+.. automodule:: synapse.api.handlers.room
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.handlers.rst

@@ -0,0 +1,21 @@
+synapse.api.handlers package
+============================
+
+Submodules
+----------
+
+.. toctree::
+
+   synapse.api.handlers.events
+   synapse.api.handlers.factory
+   synapse.api.handlers.federation
+   synapse.api.handlers.register
+   synapse.api.handlers.room
+
+Module contents
+---------------
+
+.. automodule:: synapse.api.handlers
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.notifier.rst

@@ -0,0 +1,7 @@
+synapse.api.notifier module
+===========================
+
+.. automodule:: synapse.api.notifier
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/sphinx/synapse.api.register_events.rst

@@ -0,0 +1,7 @@
+synapse.api.register_events module
+==================================
+
+.. automodule:: synapse.api.register_events
+    :members:
+    :undoc-members:
+    :show-inheritance: