Fix typo

Co-Authored-By: anoadragon453 <1342360+anoadragon453@users.noreply.github.com>

.buildkite/.env

@@ -1,13 +0,0 @@
-CI
-BUILDKITE
-BUILDKITE_BUILD_NUMBER
-BUILDKITE_BRANCH
-BUILDKITE_BUILD_NUMBER
-BUILDKITE_JOB_ID
-BUILDKITE_BUILD_URL
-BUILDKITE_PROJECT_SLUG
-BUILDKITE_COMMIT
-BUILDKITE_PULL_REQUEST
-BUILDKITE_TAG
-CODECOV_TOKEN
-TRIAL_FLAGS

.buildkite/docker-compose.py27.pg94.yaml

@@ -1,21 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:9.4
-    environment:
-      POSTGRES_PASSWORD: postgres
-
-  testenv:
-    image: python:2.7
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /app
-    volumes:
-      - ..:/app

.buildkite/docker-compose.py27.pg95.yaml

@@ -1,21 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:9.5
-    environment:
-      POSTGRES_PASSWORD: postgres
-
-  testenv:
-    image: python:2.7
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /app
-    volumes:
-      - ..:/app

.buildkite/docker-compose.py35.pg94.yaml

@@ -1,21 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:9.4
-    environment:
-      POSTGRES_PASSWORD: postgres
-
-  testenv:
-    image: python:3.5
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /app
-    volumes:
-      - ..:/app

.buildkite/docker-compose.py35.pg95.yaml

@@ -1,21 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:9.5
-    environment:
-      POSTGRES_PASSWORD: postgres
-
-  testenv:
-    image: python:3.5
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /app
-    volumes:
-      - ..:/app

.buildkite/docker-compose.py37.pg11.yaml

@@ -1,21 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:11
-    environment:
-      POSTGRES_PASSWORD: postgres
-
-  testenv:
-    image: python:3.7
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /app
-    volumes:
-      - ..:/app

.buildkite/docker-compose.py37.pg95.yaml

@@ -1,21 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:9.5
-    environment:
-      POSTGRES_PASSWORD: postgres
-
-  testenv:
-    image: python:3.7
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /app
-    volumes:
-      - ..:/app

.buildkite/pipeline.yml

@@ -1,168 +0,0 @@
-env:
-  CODECOV_TOKEN: "2dd7eb9b-0eda-45fe-a47c-9b5ac040045f"
-
-steps:
-  - command:
-      - "python -m pip install tox"
-      - "tox -e pep8"
-    label: "\U0001F9F9 PEP-8"
-    plugins:
-      - docker#v3.0.1:
-          image: "python:3.6"
-
-  - command:
-      - "python -m pip install tox"
-      - "tox -e packaging"
-    label: "\U0001F9F9 packaging"
-    plugins:
-      - docker#v3.0.1:
-          image: "python:3.6"
-
-  - command:
-      - "python -m pip install tox"
-      - "tox -e check_isort"
-    label: "\U0001F9F9 isort"
-    plugins:
-      - docker#v3.0.1:
-          image: "python:3.6"
-
-  - command:
-      - "python -m pip install tox"
-      - "scripts-dev/check-newsfragment"
-    label: ":newspaper: Newsfile"
-    branches: "!master !develop !release-*"
-    plugins:
-      - docker#v3.0.1:
-          image: "python:3.6"
-          propagate-environment: true
-
-  - wait
-
-  - command:
-      - "python -m pip install tox"
-      - "tox -e check-sampleconfig"
-    label: "\U0001F9F9 check-sample-config"
-    plugins:
-      - docker#v3.0.1:
-          image: "python:3.6"
-
-  - command:
-      - "python -m pip install tox"
-      - "tox -e py27,codecov"
-    label: ":python: 2.7 / SQLite"
-    env:
-      TRIAL_FLAGS: "-j 2"
-    plugins:
-      - docker#v3.0.1:
-          image: "python:2.7"
-          propagate-environment: true
-
-  - command:
-      - "python -m pip install tox"
-      - "tox -e py35,codecov"
-    label: ":python: 3.5 / SQLite"
-    env:
-      TRIAL_FLAGS: "-j 2"
-    plugins:
-      - docker#v3.0.1:
-          image: "python:3.5"
-          propagate-environment: true
-
-  - command:
-      - "python -m pip install tox"
-      - "tox -e py36,codecov"
-    label: ":python: 3.6 / SQLite"
-    env:
-      TRIAL_FLAGS: "-j 2"
-    plugins:
-      - docker#v3.0.1:
-          image: "python:3.6"
-          propagate-environment: true
-
-  - command:
-      - "python -m pip install tox"
-      - "tox -e py37,codecov"
-    label: ":python: 3.7 / SQLite"
-    env:
-      TRIAL_FLAGS: "-j 2"
-    plugins:
-      - docker#v3.0.1:
-          image: "python:3.7"
-          propagate-environment: true
-
-  - command:
-      - "python -m pip install tox"
-      - "tox -e py27-old,codecov"
-    label: ":python: 2.7 / SQLite / Old Deps"
-    env:
-      TRIAL_FLAGS: "-j 2"
-    plugins:
-      - docker#v3.0.1:
-          image: "python:2.7"
-          propagate-environment: true
-
-  - label: ":python: 2.7 / :postgres: 9.4"
-    env:
-      TRIAL_FLAGS: "-j 4"
-    command:
-      - "bash -c 'python -m pip install tox && python -m tox -e py27-postgres,codecov'"
-    plugins:
-      - docker-compose#v2.1.0:
-          run: testenv
-          config:
-            - .buildkite/docker-compose.py27.pg94.yaml
-
-  - label: ":python: 2.7 / :postgres: 9.5"
-    env:
-      TRIAL_FLAGS: "-j 4"
-    command:
-      - "bash -c 'python -m pip install tox && python -m tox -e py27-postgres,codecov'"
-    plugins:
-      - docker-compose#v2.1.0:
-          run: testenv
-          config:
-            - .buildkite/docker-compose.py27.pg95.yaml
-
-  - label: ":python: 3.5 / :postgres: 9.4"
-    env:
-      TRIAL_FLAGS: "-j 4"
-    command:
-      - "bash -c 'python -m pip install tox && python -m tox -e py35-postgres,codecov'"
-    plugins:
-      - docker-compose#v2.1.0:
-          run: testenv
-          config:
-            - .buildkite/docker-compose.py35.pg94.yaml
-
-  - label: ":python: 3.5 / :postgres: 9.5"
-    env:
-      TRIAL_FLAGS: "-j 4"
-    command:
-      - "bash -c 'python -m pip install tox && python -m tox -e py35-postgres,codecov'"
-    plugins:
-      - docker-compose#v2.1.0:
-          run: testenv
-          config:
-            - .buildkite/docker-compose.py35.pg95.yaml
-
-  - label: ":python: 3.7 / :postgres: 9.5"
-    env:
-      TRIAL_FLAGS: "-j 4"
-    command:
-      - "bash -c 'python -m pip install tox && python -m tox -e py37-postgres,codecov'"
-    plugins:
-      - docker-compose#v2.1.0:
-          run: testenv
-          config:
-            - .buildkite/docker-compose.py37.pg95.yaml
-
-  - label: ":python: 3.7 / :postgres: 11"
-    env:
-      TRIAL_FLAGS: "-j 4"
-    command:
-      - "bash -c 'python -m pip install tox && python -m tox -e py37-postgres,codecov'"
-    plugins:
-      - docker-compose#v2.1.0:
-          run: testenv
-          config:
-            - .buildkite/docker-compose.py37.pg11.yaml

.circleci/config.yml

@@ -4,21 +4,19 @@ jobs:
     machine: true
     steps:
       - checkout
-      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:${CIRCLE_TAG}-py2 .
-      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:${CIRCLE_TAG} -t matrixdotorg/synapse:${CIRCLE_TAG}-py3 --build-arg PYTHON_VERSION=3.6 .
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:${CIRCLE_TAG} .
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:${CIRCLE_TAG}-py3 --build-arg PYTHON_VERSION=3.6 .
       - run: docker login --username $DOCKER_HUB_USERNAME --password $DOCKER_HUB_PASSWORD
       - run: docker push matrixdotorg/synapse:${CIRCLE_TAG}
-      - run: docker push matrixdotorg/synapse:${CIRCLE_TAG}-py2
       - run: docker push matrixdotorg/synapse:${CIRCLE_TAG}-py3
   dockerhubuploadlatest:
     machine: true
     steps:
       - checkout
-      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:latest-py2 .
-      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:latest -t matrixdotorg/synapse:latest-py3 --build-arg PYTHON_VERSION=3.6 .
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:latest .
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:latest-py3 --build-arg PYTHON_VERSION=3.6 .
       - run: docker login --username $DOCKER_HUB_USERNAME --password $DOCKER_HUB_PASSWORD
       - run: docker push matrixdotorg/synapse:latest
-      - run: docker push matrixdotorg/synapse:latest-py2
       - run: docker push matrixdotorg/synapse:latest-py3
   sytestpy2:
     docker:

.codecov.yml

@@ -1,15 +0,0 @@
-comment:
-  layout: "diff"
-
-coverage:
-  status:
-    project:
-      default:
-        target: 0  # Target % coverage, can be auto. Turned off for now
-        threshold: null
-        base: auto
-    patch:
-      default:
-        target: 0
-        threshold: null
-        base: auto

.coveragerc

@@ -1,7 +1,11 @@
 [run]
 branch = True
 parallel = True
-include = synapse/*
+source = synapse
+
+[paths]
+source=
+   coverage
 
 [report]
 precision = 2

.github/ISSUE_TEMPLATE/BUG_REPORT.md

@@ -4,9 +4,9 @@ about: Create a report to help us improve
 
 ---
 
-<!--
+<!-- 
 
-**IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**:
+**IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**: 
 You will likely get better support more quickly if you ask in ** #matrix:matrix.org ** ;)
 
 
@@ -17,7 +17,7 @@ the necessary data to fix your issue.
 You can also preview your report before submitting it. You may remove sections
 that aren't relevant to your particular case.
 
-Text between <!-- and --​> marks will be invisible in the report.
+Text between <!-- and --> marks will be invisible in the report.
 
 -->
 
@@ -31,7 +31,7 @@ Text between <!-- and --​> marks will be invisible in the report.
 - that reproduce the bug
 - using hyphens as bullet points
 
-<!--
+<!-- 
 Describe how what happens differs from what you expected.
 
 If you can identify any relevant log snippets from _homeserver.log_, please include
@@ -48,8 +48,8 @@ those (please be careful to remove any personal or private data). Please surroun
 
 If not matrix.org:
 
-<!--
-What version of Synapse is running?
+<!-- 
+What version of Synapse is running? 
 You can find the Synapse version by inspecting the server headers (replace matrix.org with
 your own homeserver domain):
 $ curl -v https://matrix.org/_matrix/client/versions 2>&1 | grep "Server:"

.gitignore

@@ -1,40 +1,63 @@
-# filename patterns
-*~
-.*.swp
-.#*
-*.deb
-*.egg
-*.egg-info
-*.lock
 *.pyc
-*.tac
+.*.swp
+*~
+*.lock
+
+.DS_Store
 _trial_temp/
 _trial_temp*/
+logs/
+dbs/
+*.egg
+dist/
+docs/build/
+*.egg-info
 
-# stuff that is likely to exist when you run a server locally
-/*.db
-/*.log
-/*.log.config
-/*.pid
-/*.signing.key
-/env/
+cmdclient_config.json
+homeserver*.db
+homeserver*.log
+homeserver*.log.*
+homeserver*.pid
 /homeserver*.yaml
-/media_store/
-/uploads
 
-# IDEs
-/.idea/
-/.ropeproject/
-/.vscode/
+*.signing.key
+*.tls.crt
+*.tls.dh
+*.tls.key
 
-# build products
-/.coverage*
-!/.coveragerc
-/.tox
-/build/
-/coverage.*
-/dist/
-/docs/build/
-/htmlcov
-/pip-wheel-metadata/
+.coverage
+.coverage.*
+!.coverage.rc
+htmlcov
 
+demo/*/*.db
+demo/*/*.log
+demo/*/*.log.*
+demo/*/*.pid
+demo/media_store.*
+demo/etc
+
+uploads
+cache
+
+.idea/
+media_store/
+
+*.tac
+
+build/
+venv/
+venv*/
+*venv/
+
+localhost-800*/
+static/client/register/register_config.js
+.tox
+
+env/
+*.config
+
+.vscode/
+.ropeproject/
+*.deb
+/debs

.travis.yml

@@ -0,0 +1,73 @@
+sudo: false
+language: python
+
+cache:
+  directories:
+    # we only bother to cache the wheels; parts of the http cache get
+    # invalidated every build (because they get served with a max-age of 600
+    # seconds), which means that we end up re-uploading the whole cache for
+    # every build, which is time-consuming In any case, it's not obvious that
+    # downloading the cache from S3 would be much faster than downloading the
+    # originals from pypi.
+    #
+    - $HOME/.cache/pip/wheels
+
+# don't clone the whole repo history, one commit will do
+git:
+  depth: 1
+
+# only build branches we care about (PRs are built seperately)
+branches:
+  only:
+    - master
+    - develop
+    - /^release-v/
+
+# When running the tox environments that call Twisted Trial, we can pass the -j
+# flag to run the tests concurrently. We set this to 2 for CPU bound tests
+# (SQLite) and 4 for I/O bound tests (PostgreSQL).
+matrix:
+  fast_finish: true
+  include:
+  - python: 2.7
+    env: TOX_ENV=packaging
+
+  - python: 3.6
+    env: TOX_ENV="pep8,check_isort"
+
+  - python: 2.7
+    env: TOX_ENV=py27,codecov TRIAL_FLAGS="-j 2"
+
+  - python: 2.7
+    env: TOX_ENV=py27-old TRIAL_FLAGS="-j 2"
+
+  - python: 2.7
+    env: TOX_ENV=py27-postgres,codecov TRIAL_FLAGS="-j 4"
+    services:
+      - postgresql
+
+  - python: 3.5
+    env: TOX_ENV=py35,codecov TRIAL_FLAGS="-j 2"
+
+  - python: 3.6
+    env: TOX_ENV=py36,codecov TRIAL_FLAGS="-j 2"
+
+  - python: 3.6
+    env: TOX_ENV=py36-postgres,codecov TRIAL_FLAGS="-j 4"
+    services:
+      - postgresql
+
+  - # we only need to check for the newsfragment if it's a PR build
+    if: type = pull_request
+    python: 3.6
+    env: TOX_ENV=check-newsfragment
+    script:
+      - git remote set-branches --add origin develop
+      - git fetch origin develop
+      - tox -e $TOX_ENV
+
+install:
+  - pip install tox
+
+script:
+  - tox -e $TOX_ENV

AUTHORS.rst

@@ -69,6 +69,3 @@ Serban Constantin <serban.constantin at gmail dot com>
 
 Jason Robinson <jasonr at matrix.org>
  * Minor fixes
-
-Joseph Weston <joseph at weston.cloud>
- + Add admin API for querying HS version

CHANGES.md

@@ -1,293 +1,3 @@
-Synapse 0.99.3 (2019-04-01)
-===========================
-
-No significant changes.
-
-
-Synapse 0.99.3rc1 (2019-03-27)
-==============================
-
-Features
---------
-
-- The user directory has been rewritten to make it faster, with less chance of falling behind on a large server. ([\#4537](https://github.com/matrix-org/synapse/issues/4537), [\#4846](https://github.com/matrix-org/synapse/issues/4846), [\#4864](https://github.com/matrix-org/synapse/issues/4864), [\#4887](https://github.com/matrix-org/synapse/issues/4887), [\#4900](https://github.com/matrix-org/synapse/issues/4900), [\#4944](https://github.com/matrix-org/synapse/issues/4944))
-- Add configurable rate limiting to the /register endpoint. ([\#4735](https://github.com/matrix-org/synapse/issues/4735), [\#4804](https://github.com/matrix-org/synapse/issues/4804))
-- Move server key queries to federation reader. ([\#4757](https://github.com/matrix-org/synapse/issues/4757))
-- Add support for /account/3pid REST endpoint to client_reader worker. ([\#4759](https://github.com/matrix-org/synapse/issues/4759))
-- Add an endpoint to the admin API for querying the server version. Contributed by Joseph Weston. ([\#4772](https://github.com/matrix-org/synapse/issues/4772))
-- Include a default configuration file in the 'docs' directory. ([\#4791](https://github.com/matrix-org/synapse/issues/4791), [\#4801](https://github.com/matrix-org/synapse/issues/4801))
-- Synapse is now permissive about trailing slashes on some of its federation endpoints, allowing zero or more to be present. ([\#4793](https://github.com/matrix-org/synapse/issues/4793))
-- Add support for /keys/query and /keys/changes REST endpoints to client_reader worker. ([\#4796](https://github.com/matrix-org/synapse/issues/4796))
-- Add checks to incoming events over federation for events evading auth (aka "soft fail"). ([\#4814](https://github.com/matrix-org/synapse/issues/4814))
-- Add configurable rate limiting to the /login endpoint. ([\#4821](https://github.com/matrix-org/synapse/issues/4821), [\#4865](https://github.com/matrix-org/synapse/issues/4865))
-- Remove trailing slashes from certain outbound federation requests. Retry if receiving a 404. Context: #3622. ([\#4840](https://github.com/matrix-org/synapse/issues/4840))
-- Allow passing --daemonize flags to workers in the same way as with master. ([\#4853](https://github.com/matrix-org/synapse/issues/4853))
-- Batch up outgoing read-receipts to reduce federation traffic. ([\#4890](https://github.com/matrix-org/synapse/issues/4890), [\#4927](https://github.com/matrix-org/synapse/issues/4927))
-- Add option to disable searching the user directory. ([\#4895](https://github.com/matrix-org/synapse/issues/4895))
-- Add option to disable searching of local and remote public room lists. ([\#4896](https://github.com/matrix-org/synapse/issues/4896))
-- Add ability for password providers to login/register a user via 3PID (email, phone). ([\#4931](https://github.com/matrix-org/synapse/issues/4931))
-
-
-Bugfixes
---------
-
-- Fix a bug where media with spaces in the name would get a corrupted name. ([\#2090](https://github.com/matrix-org/synapse/issues/2090))
-- Fix attempting to paginate in rooms where server cannot see any events, to avoid unnecessarily pulling in lots of redacted events. ([\#4699](https://github.com/matrix-org/synapse/issues/4699))
-- 'event_id' is now a required parameter in federated state requests, as per the matrix spec. ([\#4740](https://github.com/matrix-org/synapse/issues/4740))
-- Fix tightloop over connecting to replication server. ([\#4749](https://github.com/matrix-org/synapse/issues/4749))
-- Fix parsing of Content-Disposition headers on remote media requests and URL previews. ([\#4763](https://github.com/matrix-org/synapse/issues/4763))
-- Fix incorrect log about not persisting duplicate state event. ([\#4776](https://github.com/matrix-org/synapse/issues/4776))
-- Fix v4v6 option in HAProxy example config. Contributed by Flakebi. ([\#4790](https://github.com/matrix-org/synapse/issues/4790))
-- Handle batch updates in worker replication protocol. ([\#4792](https://github.com/matrix-org/synapse/issues/4792))
-- Fix bug where we didn't correctly throttle sending of USER_IP commands over replication. ([\#4818](https://github.com/matrix-org/synapse/issues/4818))
-- Fix potential race in handling missing updates in device list updates. ([\#4829](https://github.com/matrix-org/synapse/issues/4829))
-- Fix bug where synapse expected an un-specced `prev_state` field on state events. ([\#4837](https://github.com/matrix-org/synapse/issues/4837))
-- Transfer a user's notification settings (push rules) on room upgrade. ([\#4838](https://github.com/matrix-org/synapse/issues/4838))
-- fix test_auto_create_auto_join_where_no_consent. ([\#4886](https://github.com/matrix-org/synapse/issues/4886))
-- Fix a bug where hs_disabled_message was sometimes not correctly enforced. ([\#4888](https://github.com/matrix-org/synapse/issues/4888))
-- Fix bug in shutdown room admin API where it would fail if a user in the room hadn't consented to the privacy policy. ([\#4904](https://github.com/matrix-org/synapse/issues/4904))
-- Fix bug where blocked world-readable rooms were still peekable. ([\#4908](https://github.com/matrix-org/synapse/issues/4908))
-
-
-Internal Changes
-----------------
-
-- Add a systemd setup that supports synapse workers. Contributed by Luca Corbatto. ([\#4662](https://github.com/matrix-org/synapse/issues/4662))
-- Change from TravisCI to Buildkite for CI. ([\#4752](https://github.com/matrix-org/synapse/issues/4752))
-- When presence is disabled don't send over replication. ([\#4757](https://github.com/matrix-org/synapse/issues/4757))
-- Minor docstring fixes for MatrixFederationAgent. ([\#4765](https://github.com/matrix-org/synapse/issues/4765))
-- Optimise EDU transmission for the federation_sender worker. ([\#4770](https://github.com/matrix-org/synapse/issues/4770))
-- Update test_typing to use HomeserverTestCase. ([\#4771](https://github.com/matrix-org/synapse/issues/4771))
-- Update URLs for riot.im icons and logos in the default notification templates. ([\#4779](https://github.com/matrix-org/synapse/issues/4779))
-- Removed unnecessary $ from some federation endpoint path regexes. ([\#4794](https://github.com/matrix-org/synapse/issues/4794))
-- Remove link to deleted title in README. ([\#4795](https://github.com/matrix-org/synapse/issues/4795))
-- Clean up read-receipt handling. ([\#4797](https://github.com/matrix-org/synapse/issues/4797))
-- Add some debug about processing read receipts. ([\#4798](https://github.com/matrix-org/synapse/issues/4798))
-- Clean up some replication code. ([\#4799](https://github.com/matrix-org/synapse/issues/4799))
-- Add some docstrings. ([\#4815](https://github.com/matrix-org/synapse/issues/4815))
-- Add debug logger to try and track down #4422. ([\#4816](https://github.com/matrix-org/synapse/issues/4816))
-- Make shutdown API send explanation message to room after users have been forced joined. ([\#4817](https://github.com/matrix-org/synapse/issues/4817))
-- Update example_log_config.yaml. ([\#4820](https://github.com/matrix-org/synapse/issues/4820))
-- Document the `generate` option for the docker image. ([\#4824](https://github.com/matrix-org/synapse/issues/4824))
-- Fix check-newsfragment for debian-only changes. ([\#4825](https://github.com/matrix-org/synapse/issues/4825))
-- Add some debug logging for device list updates to help with #4828. ([\#4828](https://github.com/matrix-org/synapse/issues/4828))
-- Improve federation documentation, specifically .well-known support. Many thanks to @vaab. ([\#4832](https://github.com/matrix-org/synapse/issues/4832))
-- Disable captcha registration by default in unit tests. ([\#4839](https://github.com/matrix-org/synapse/issues/4839))
-- Add stuff back to the .gitignore. ([\#4843](https://github.com/matrix-org/synapse/issues/4843))
-- Clarify what registration_shared_secret allows for. ([\#4844](https://github.com/matrix-org/synapse/issues/4844))
-- Correctly log expected errors when fetching server keys. ([\#4847](https://github.com/matrix-org/synapse/issues/4847))
-- Update install docs to explicitly state a full-chain (not just the top-level) TLS certificate must be provided to Synapse. This caused some people's Synapse ports to appear correct in a browser but still (rightfully so) upset the federation tester. ([\#4849](https://github.com/matrix-org/synapse/issues/4849))
-- Move client read-receipt processing to federation sender worker. ([\#4852](https://github.com/matrix-org/synapse/issues/4852))
-- Refactor federation TransactionQueue. ([\#4855](https://github.com/matrix-org/synapse/issues/4855))
-- Comment out most options in the generated config. ([\#4863](https://github.com/matrix-org/synapse/issues/4863))
-- Fix yaml library warnings by using safe_load. ([\#4869](https://github.com/matrix-org/synapse/issues/4869))
-- Update Apache setup to remove location syntax. Thanks to @cwmke! ([\#4870](https://github.com/matrix-org/synapse/issues/4870))
-- Reinstate test case that runs unit tests against oldest supported dependencies. ([\#4879](https://github.com/matrix-org/synapse/issues/4879))
-- Update link to federation docs. ([\#4881](https://github.com/matrix-org/synapse/issues/4881))
-- fix test_auto_create_auto_join_where_no_consent. ([\#4886](https://github.com/matrix-org/synapse/issues/4886))
-- Use a regular HomeServerConfig object for unit tests rater than a Mock. ([\#4889](https://github.com/matrix-org/synapse/issues/4889))
-- Add some notes about tuning postgres for larger deployments. ([\#4895](https://github.com/matrix-org/synapse/issues/4895))
-- Add a config option for torture-testing worker replication. ([\#4902](https://github.com/matrix-org/synapse/issues/4902))
-- Log requests which are simulated by the unit tests. ([\#4905](https://github.com/matrix-org/synapse/issues/4905))
-- Allow newsfragments to end with exclamation marks. Exciting! ([\#4912](https://github.com/matrix-org/synapse/issues/4912))
-- Refactor some more tests to use HomeserverTestCase. ([\#4913](https://github.com/matrix-org/synapse/issues/4913))
-- Refactor out the state deltas portion of the user directory store and handler. ([\#4917](https://github.com/matrix-org/synapse/issues/4917))
-- Fix nginx example in ACME doc. ([\#4923](https://github.com/matrix-org/synapse/issues/4923))
-- Use an explicit dbname for postgres connections in the tests. ([\#4928](https://github.com/matrix-org/synapse/issues/4928))
-- Fix `ClientReplicationStreamProtocol.__str__()`. ([\#4929](https://github.com/matrix-org/synapse/issues/4929))
-
-
-Synapse 0.99.2 (2019-03-01)
-===========================
-
-Features
---------
-
-- Added an HAProxy example in the reverse proxy documentation. Contributed by Benoît S. (“Benpro”). ([\#4541](https://github.com/matrix-org/synapse/issues/4541))
-- Add basic optional sentry integration. ([\#4632](https://github.com/matrix-org/synapse/issues/4632), [\#4694](https://github.com/matrix-org/synapse/issues/4694))
-- Transfer bans on room upgrade. ([\#4642](https://github.com/matrix-org/synapse/issues/4642))
-- Add configurable room list publishing rules. ([\#4647](https://github.com/matrix-org/synapse/issues/4647))
-- Support .well-known delegation when issuing certificates through ACME. ([\#4652](https://github.com/matrix-org/synapse/issues/4652))
-- Allow registration and login to be handled by a worker instance. ([\#4666](https://github.com/matrix-org/synapse/issues/4666), [\#4670](https://github.com/matrix-org/synapse/issues/4670), [\#4682](https://github.com/matrix-org/synapse/issues/4682))
-- Reduce the overhead of creating outbound federation connections over TLS by caching the TLS client options. ([\#4674](https://github.com/matrix-org/synapse/issues/4674))
-- Add prometheus metrics for number of outgoing EDUs, by type. ([\#4695](https://github.com/matrix-org/synapse/issues/4695))
-- Return correct error code when inviting a remote user to a room whose homeserver does not support the room version. ([\#4721](https://github.com/matrix-org/synapse/issues/4721))
-- Prevent showing rooms to other servers that were set to not federate. ([\#4746](https://github.com/matrix-org/synapse/issues/4746))
-
-
-Bugfixes
---------
-
-- Fix possible exception when paginating. ([\#4263](https://github.com/matrix-org/synapse/issues/4263))
-- The dependency checker now correctly reports a version mismatch for optional
-  dependencies, instead of reporting the dependency missing. ([\#4450](https://github.com/matrix-org/synapse/issues/4450))
-- Set CORS headers on .well-known requests. ([\#4651](https://github.com/matrix-org/synapse/issues/4651))
-- Fix kicking guest users on guest access revocation in worker mode. ([\#4667](https://github.com/matrix-org/synapse/issues/4667))
-- Fix an issue in the database migration script where the
-  `e2e_room_keys.is_verified` column wasn't considered as
-  a boolean. ([\#4680](https://github.com/matrix-org/synapse/issues/4680))
-- Fix TaskStopped exceptions in logs when outbound requests time out. ([\#4690](https://github.com/matrix-org/synapse/issues/4690))
-- Fix ACME config for python 2. ([\#4717](https://github.com/matrix-org/synapse/issues/4717))
-- Fix paginating over federation persisting incorrect state. ([\#4718](https://github.com/matrix-org/synapse/issues/4718))
-
-
-Internal Changes
-----------------
-
-- Run `black` to reformat user directory code. ([\#4635](https://github.com/matrix-org/synapse/issues/4635))
-- Reduce number of exceptions we log. ([\#4643](https://github.com/matrix-org/synapse/issues/4643), [\#4668](https://github.com/matrix-org/synapse/issues/4668))
-- Introduce upsert batching functionality in the database layer. ([\#4644](https://github.com/matrix-org/synapse/issues/4644))
-- Fix various spelling mistakes. ([\#4657](https://github.com/matrix-org/synapse/issues/4657))
-- Cleanup request exception logging. ([\#4669](https://github.com/matrix-org/synapse/issues/4669), [\#4737](https://github.com/matrix-org/synapse/issues/4737), [\#4738](https://github.com/matrix-org/synapse/issues/4738))
-- Improve replication performance by reducing cache invalidation traffic. ([\#4671](https://github.com/matrix-org/synapse/issues/4671), [\#4715](https://github.com/matrix-org/synapse/issues/4715), [\#4748](https://github.com/matrix-org/synapse/issues/4748))
-- Test against Postgres 9.5 as well as 9.4. ([\#4676](https://github.com/matrix-org/synapse/issues/4676))
-- Run unit tests against python 3.7. ([\#4677](https://github.com/matrix-org/synapse/issues/4677))
-- Attempt to clarify installation instructions/config. ([\#4681](https://github.com/matrix-org/synapse/issues/4681))
-- Clean up gitignores. ([\#4688](https://github.com/matrix-org/synapse/issues/4688))
-- Minor tweaks to acme docs. ([\#4689](https://github.com/matrix-org/synapse/issues/4689))
-- Improve the logging in the pusher process. ([\#4691](https://github.com/matrix-org/synapse/issues/4691))
-- Better checks on newsfragments. ([\#4698](https://github.com/matrix-org/synapse/issues/4698), [\#4750](https://github.com/matrix-org/synapse/issues/4750))
-- Avoid some redundant work when processing read receipts. ([\#4706](https://github.com/matrix-org/synapse/issues/4706))
-- Run `push_receipts_to_remotes` as background job. ([\#4707](https://github.com/matrix-org/synapse/issues/4707))
-- Add prometheus metrics for number of badge update pushes. ([\#4709](https://github.com/matrix-org/synapse/issues/4709))
-- Reduce pusher logging on startup ([\#4716](https://github.com/matrix-org/synapse/issues/4716))
-- Don't log exceptions when failing to fetch remote server keys. ([\#4722](https://github.com/matrix-org/synapse/issues/4722))
-- Correctly proxy exception in frontend_proxy worker. ([\#4723](https://github.com/matrix-org/synapse/issues/4723))
-- Add database version to phonehome stats. ([\#4753](https://github.com/matrix-org/synapse/issues/4753))
-
-
-Synapse 0.99.1.1 (2019-02-14)
-=============================
-
-Bugfixes
---------
-
-- Fix "TypeError: '>' not supported" when starting without an existing certificate.
-  Fix a bug where an existing certificate would be reprovisoned every day. ([\#4648](https://github.com/matrix-org/synapse/issues/4648))
-
-
-Synapse 0.99.1 (2019-02-14)
-===========================
-
-Features
---------
-
-- Include m.room.encryption on invites by default ([\#3902](https://github.com/matrix-org/synapse/issues/3902))
-- Federation OpenID listener resource can now be activated even if federation is disabled ([\#4420](https://github.com/matrix-org/synapse/issues/4420))
-- Synapse's ACME support will now correctly reprovision a certificate that approaches its expiry while Synapse is running. ([\#4522](https://github.com/matrix-org/synapse/issues/4522))
-- Add ability to update backup versions ([\#4580](https://github.com/matrix-org/synapse/issues/4580))
-- Allow the "unavailable" presence status for /sync.
-  This change makes Synapse compliant with r0.4.0 of the Client-Server specification. ([\#4592](https://github.com/matrix-org/synapse/issues/4592))
-- There is no longer any need to specify `no_tls`: it is inferred from the absence of TLS listeners ([\#4613](https://github.com/matrix-org/synapse/issues/4613), [\#4615](https://github.com/matrix-org/synapse/issues/4615), [\#4617](https://github.com/matrix-org/synapse/issues/4617), [\#4636](https://github.com/matrix-org/synapse/issues/4636))
-- The default configuration no longer requires TLS certificates. ([\#4614](https://github.com/matrix-org/synapse/issues/4614))
-
-
-Bugfixes
---------
-
-- Copy over room federation ability on room upgrade. ([\#4530](https://github.com/matrix-org/synapse/issues/4530))
-- Fix noisy "twisted.internet.task.TaskStopped" errors in logs ([\#4546](https://github.com/matrix-org/synapse/issues/4546))
-- Synapse is now tolerant of the `tls_fingerprints` option being None or not specified. ([\#4589](https://github.com/matrix-org/synapse/issues/4589))
-- Fix 'no unique or exclusion constraint' error ([\#4591](https://github.com/matrix-org/synapse/issues/4591))
-- Transfer Server ACLs on room upgrade. ([\#4608](https://github.com/matrix-org/synapse/issues/4608))
-- Fix failure to start when not TLS certificate was given even if TLS was disabled. ([\#4618](https://github.com/matrix-org/synapse/issues/4618))
-- Fix self-signed cert notice from generate-config. ([\#4625](https://github.com/matrix-org/synapse/issues/4625))
-- Fix performance of `user_ips` table deduplication background update ([\#4626](https://github.com/matrix-org/synapse/issues/4626), [\#4627](https://github.com/matrix-org/synapse/issues/4627))
-
-
-Internal Changes
-----------------
-
-- Change the user directory state query to use a filtered call to the db instead of a generic one. ([\#4462](https://github.com/matrix-org/synapse/issues/4462))
-- Reject federation transactions if they include more than 50 PDUs or 100 EDUs. ([\#4513](https://github.com/matrix-org/synapse/issues/4513))
-- Reduce duplication of ``synapse.app`` code. ([\#4567](https://github.com/matrix-org/synapse/issues/4567))
-- Fix docker upload job to push -py2 images. ([\#4576](https://github.com/matrix-org/synapse/issues/4576))
-- Add port configuration information to ACME instructions. ([\#4578](https://github.com/matrix-org/synapse/issues/4578))
-- Update MSC1711 FAQ to calrify .well-known usage ([\#4584](https://github.com/matrix-org/synapse/issues/4584))
-- Clean up default listener configuration ([\#4586](https://github.com/matrix-org/synapse/issues/4586))
-- Clarifications for reverse proxy docs ([\#4607](https://github.com/matrix-org/synapse/issues/4607))
-- Move ClientTLSOptionsFactory init out of `refresh_certificates` ([\#4611](https://github.com/matrix-org/synapse/issues/4611))
-- Fail cleanly if listener config lacks a 'port' ([\#4616](https://github.com/matrix-org/synapse/issues/4616))
-- Remove redundant entries from docker config ([\#4619](https://github.com/matrix-org/synapse/issues/4619))
-- README updates ([\#4621](https://github.com/matrix-org/synapse/issues/4621))
-
-
-Synapse 0.99.0 (2019-02-05)
-===========================
-
-Synapse v0.99.x is a precursor to the upcoming Synapse v1.0 release. It contains foundational changes to room architecture and the federation security model necessary to support the upcoming r0 release of the Server to Server API.
-
-Features
---------
-
-- Synapse's cipher string has been updated to require ECDH key exchange. Configuring and generating dh_params is no longer required, and they will be ignored. ([\#4229](https://github.com/matrix-org/synapse/issues/4229))
-- Synapse can now automatically provision TLS certificates via ACME (the protocol used by CAs like Let's Encrypt). ([\#4384](https://github.com/matrix-org/synapse/issues/4384), [\#4492](https://github.com/matrix-org/synapse/issues/4492), [\#4525](https://github.com/matrix-org/synapse/issues/4525), [\#4572](https://github.com/matrix-org/synapse/issues/4572), [\#4564](https://github.com/matrix-org/synapse/issues/4564), [\#4566](https://github.com/matrix-org/synapse/issues/4566), [\#4547](https://github.com/matrix-org/synapse/issues/4547), [\#4557](https://github.com/matrix-org/synapse/issues/4557))
-- Implement MSC1708 (.well-known routing for server-server federation) ([\#4408](https://github.com/matrix-org/synapse/issues/4408), [\#4409](https://github.com/matrix-org/synapse/issues/4409), [\#4426](https://github.com/matrix-org/synapse/issues/4426), [\#4427](https://github.com/matrix-org/synapse/issues/4427), [\#4428](https://github.com/matrix-org/synapse/issues/4428), [\#4464](https://github.com/matrix-org/synapse/issues/4464), [\#4468](https://github.com/matrix-org/synapse/issues/4468), [\#4487](https://github.com/matrix-org/synapse/issues/4487), [\#4488](https://github.com/matrix-org/synapse/issues/4488), [\#4489](https://github.com/matrix-org/synapse/issues/4489), [\#4497](https://github.com/matrix-org/synapse/issues/4497), [\#4511](https://github.com/matrix-org/synapse/issues/4511), [\#4516](https://github.com/matrix-org/synapse/issues/4516), [\#4520](https://github.com/matrix-org/synapse/issues/4520), [\#4521](https://github.com/matrix-org/synapse/issues/4521), [\#4539](https://github.com/matrix-org/synapse/issues/4539), [\#4542](https://github.com/matrix-org/synapse/issues/4542), [\#4544](https://github.com/matrix-org/synapse/issues/4544))
-- Search now includes results from predecessor rooms after a room upgrade. ([\#4415](https://github.com/matrix-org/synapse/issues/4415))
-- Config option to disable requesting MSISDN on registration. ([\#4423](https://github.com/matrix-org/synapse/issues/4423))
-- Add a metric for tracking event stream position of the user directory. ([\#4445](https://github.com/matrix-org/synapse/issues/4445))
-- Support exposing server capabilities in CS API (MSC1753, MSC1804) ([\#4472](https://github.com/matrix-org/synapse/issues/4472), [81b7e7eed](https://github.com/matrix-org/synapse/commit/81b7e7eed323f55d6550e7a270a9dc2c4c7b0fe0)))
-- Add support for room version 3 ([\#4483](https://github.com/matrix-org/synapse/issues/4483), [\#4499](https://github.com/matrix-org/synapse/issues/4499), [\#4515](https://github.com/matrix-org/synapse/issues/4515), [\#4523](https://github.com/matrix-org/synapse/issues/4523), [\#4535](https://github.com/matrix-org/synapse/issues/4535))
-- Synapse will now reload TLS certificates from disk upon SIGHUP. ([\#4495](https://github.com/matrix-org/synapse/issues/4495), [\#4524](https://github.com/matrix-org/synapse/issues/4524))
-- The matrixdotorg/synapse Docker images now use Python 3 by default. ([\#4558](https://github.com/matrix-org/synapse/issues/4558))
-
-Bugfixes
---------
-
-- Prevent users with access tokens predating the introduction of device IDs from creating spurious entries in the user_ips table. ([\#4369](https://github.com/matrix-org/synapse/issues/4369))
-- Fix typo in ALL_USER_TYPES definition to ensure type is a tuple ([\#4392](https://github.com/matrix-org/synapse/issues/4392))
-- Fix high CPU usage due to remote devicelist updates ([\#4397](https://github.com/matrix-org/synapse/issues/4397))
-- Fix potential bug where creating or joining a room could fail ([\#4404](https://github.com/matrix-org/synapse/issues/4404))
-- Fix bug when rejecting remote invites ([\#4405](https://github.com/matrix-org/synapse/issues/4405), [\#4527](https://github.com/matrix-org/synapse/issues/4527))
-- Fix incorrect logcontexts after a Deferred was cancelled ([\#4407](https://github.com/matrix-org/synapse/issues/4407))
-- Ensure encrypted room state is persisted across room upgrades. ([\#4411](https://github.com/matrix-org/synapse/issues/4411))
-- Copy over whether a room is a direct message and any associated room tags on room upgrade. ([\#4412](https://github.com/matrix-org/synapse/issues/4412))
-- Fix None guard in calling config.server.is_threepid_reserved ([\#4435](https://github.com/matrix-org/synapse/issues/4435))
-- Don't send IP addresses as SNI ([\#4452](https://github.com/matrix-org/synapse/issues/4452))
-- Fix UnboundLocalError in post_urlencoded_get_json ([\#4460](https://github.com/matrix-org/synapse/issues/4460))
-- Add a timeout to filtered room directory queries. ([\#4461](https://github.com/matrix-org/synapse/issues/4461))
-- Workaround for login error when using both LDAP and internal authentication. ([\#4486](https://github.com/matrix-org/synapse/issues/4486))
-- Fix a bug where setting a relative consent directory path would cause a crash. ([\#4512](https://github.com/matrix-org/synapse/issues/4512))
-
-
-Deprecations and Removals
--------------------------
-
-- Synapse no longer generates self-signed TLS certificates when generating a configuration file. ([\#4509](https://github.com/matrix-org/synapse/issues/4509))
-
-
-Improved Documentation
-----------------------
-
-- Update debian installation instructions ([\#4526](https://github.com/matrix-org/synapse/issues/4526))
-
-
-Internal Changes
-----------------
-
-- Synapse will now take advantage of native UPSERT functionality in PostgreSQL 9.5+ and SQLite 3.24+. ([\#4306](https://github.com/matrix-org/synapse/issues/4306), [\#4459](https://github.com/matrix-org/synapse/issues/4459), [\#4466](https://github.com/matrix-org/synapse/issues/4466), [\#4471](https://github.com/matrix-org/synapse/issues/4471), [\#4477](https://github.com/matrix-org/synapse/issues/4477), [\#4505](https://github.com/matrix-org/synapse/issues/4505))
-- Update README to use the new virtualenv everywhere ([\#4342](https://github.com/matrix-org/synapse/issues/4342))
-- Add better logging for unexpected errors while sending transactions ([\#4368](https://github.com/matrix-org/synapse/issues/4368))
-- Apply a unique index to the user_ips table, preventing duplicates. ([\#4370](https://github.com/matrix-org/synapse/issues/4370), [\#4432](https://github.com/matrix-org/synapse/issues/4432), [\#4434](https://github.com/matrix-org/synapse/issues/4434))
-- Silence travis-ci build warnings by removing non-functional python3.6 ([\#4377](https://github.com/matrix-org/synapse/issues/4377))
-- Fix a comment in the generated config file ([\#4387](https://github.com/matrix-org/synapse/issues/4387))
-- Add ground work for implementing future federation API versions ([\#4390](https://github.com/matrix-org/synapse/issues/4390))
-- Update dependencies on msgpack and pymacaroons to use the up-to-date packages. ([\#4399](https://github.com/matrix-org/synapse/issues/4399))
-- Tweak codecov settings to make them less loud. ([\#4400](https://github.com/matrix-org/synapse/issues/4400))
-- Implement server support for MSC1794 - Federation v2 Invite API ([\#4402](https://github.com/matrix-org/synapse/issues/4402))
-- debian package: symlink to explicit python version ([\#4433](https://github.com/matrix-org/synapse/issues/4433))
-- Add infrastructure to support different event formats ([\#4437](https://github.com/matrix-org/synapse/issues/4437), [\#4447](https://github.com/matrix-org/synapse/issues/4447), [\#4448](https://github.com/matrix-org/synapse/issues/4448), [\#4470](https://github.com/matrix-org/synapse/issues/4470), [\#4481](https://github.com/matrix-org/synapse/issues/4481), [\#4482](https://github.com/matrix-org/synapse/issues/4482), [\#4493](https://github.com/matrix-org/synapse/issues/4493), [\#4494](https://github.com/matrix-org/synapse/issues/4494), [\#4496](https://github.com/matrix-org/synapse/issues/4496), [\#4510](https://github.com/matrix-org/synapse/issues/4510), [\#4514](https://github.com/matrix-org/synapse/issues/4514))
-- Generate the debian config during build ([\#4444](https://github.com/matrix-org/synapse/issues/4444))
-- Clarify documentation for the `public_baseurl` config param ([\#4458](https://github.com/matrix-org/synapse/issues/4458), [\#4498](https://github.com/matrix-org/synapse/issues/4498))
-- Fix quoting for allowed_local_3pids example config ([\#4476](https://github.com/matrix-org/synapse/issues/4476))
-- Remove deprecated --process-dependency-links option from UPGRADE.rst ([\#4485](https://github.com/matrix-org/synapse/issues/4485))
-- Make it possible to set the log level for tests via an environment variable ([\#4506](https://github.com/matrix-org/synapse/issues/4506))
-- Reduce the log level of linearizer lock acquirement to DEBUG. ([\#4507](https://github.com/matrix-org/synapse/issues/4507))
-- Fix code to comply with linting in PyFlakes 3.7.1. ([\#4519](https://github.com/matrix-org/synapse/issues/4519))
-- Add some debug for membership syncing issues ([\#4538](https://github.com/matrix-org/synapse/issues/4538))
-- Docker: only copy what we need to the build image ([\#4562](https://github.com/matrix-org/synapse/issues/4562))
-
-
 Synapse 0.34.1.1 (2019-01-11)
 =============================
 

CONTRIBUTING.rst

@@ -30,7 +30,7 @@ use github's pull request workflow to review the contribution, and either ask
 you to make any refinements needed or merge it and make them ourselves. The
 changes will then land on master when we next do a release.
 
-We use `CircleCI <https://circleci.com/gh/matrix-org>`_ and `Travis CI
+We use `CircleCI <https://circleci.com/gh/matrix-org>`_ and `Travis CI 
 <https://travis-ci.org/matrix-org/synapse>`_ for continuous integration. All
 pull requests to synapse get automatically tested by Travis and CircleCI.
 If your change breaks the build, this will be shown in GitHub, so please
@@ -74,39 +74,16 @@ entry. These are managed by Towncrier
 To create a changelog entry, make a new file in the ``changelog.d``
 file named in the format of ``PRnumber.type``. The type can be
 one of ``feature``, ``bugfix``, ``removal`` (also used for
-deprecations), or ``misc`` (for internal-only changes).
-
-The content of the file is your changelog entry, which can contain Markdown
-formatting. The entry should end with a full stop ('.') for consistency.
-
-Adding credits to the changelog is encouraged, we value your
-contributions and would like to have you shouted out in the release notes!
+deprecations), or ``misc`` (for internal-only changes). The content of
+the file is your changelog entry, which can contain Markdown
+formatting. Adding credits to the changelog is encouraged, we value
+your contributions and would like to have you shouted out in the
+release notes!
 
 For example, a fix in PR #1234 would have its changelog entry in
 ``changelog.d/1234.bugfix``, and contain content like "The security levels of
 Florbs are now validated when recieved over federation. Contributed by Jane
-Matrix.".
-
-Debian changelog
-----------------
-
-Changes which affect the debian packaging files (in ``debian``) are an
-exception.
-
-In this case, you will need to add an entry to the debian changelog for the
-next release. For this, run the following command::
-
-  dch
-
-This will make up a new version number (if there isn't already an unreleased
-version in flight), and open an editor where you can add a new changelog entry.
-(Our release process will ensure that the version number and maintainer name is
-corrected for the release.)
-
-If your change affects both the debian packaging *and* files outside the debian
-directory, you will need both a regular newsfragment *and* an entry in the
-debian changelog. (Though typically such changes should be submitted as two
-separate pull requests.)
+Matrix".
 
 Attribution
 ~~~~~~~~~~~

INSTALL.md

@@ -1,434 +0,0 @@
-* [Installing Synapse](#installing-synapse)
-  * [Installing from source](#installing-from-source)
-    * [Platform-Specific Instructions](#platform-specific-instructions)
-    * [Troubleshooting Installation](#troubleshooting-installation)
-  * [Prebuilt packages](#prebuilt-packages)
-* [Setting up Synapse](#setting-up-synapse)
-  * [TLS certificates](#tls-certificates)
-  * [Registering a user](#registering-a-user)
-  * [Setting up a TURN server](#setting-up-a-turn-server)
-  * [URL previews](#url-previews)
-
-# Installing Synapse
-
-## Installing from source
-
-(Prebuilt packages are available for some platforms - see [Prebuilt packages](#prebuilt-packages).)
-
-System requirements:
-
-- POSIX-compliant system (tested on Linux & OS X)
-- Python 3.5, 3.6, 3.7, or 2.7
-- At least 1GB of free RAM if you want to join large public rooms like #matrix:matrix.org
-
-Synapse is written in Python but some of the libraries it uses are written in
-C. So before we can install Synapse itself we need a working C compiler and the
-header files for Python C extensions. See [Platform-Specific
-Instructions](#platform-specific-instructions) for information on installing
-these on various platforms.
-
-To install the Synapse homeserver run:
-
-```
-mkdir -p ~/synapse
-virtualenv -p python3 ~/synapse/env
-source ~/synapse/env/bin/activate
-pip install --upgrade pip
-pip install --upgrade setuptools
-pip install matrix-synapse[all]
-```
-
-This will download Synapse from [PyPI](https://pypi.org/project/matrix-synapse)
-and install it, along with the python libraries it uses, into a virtual environment
-under `~/synapse/env`.  Feel free to pick a different directory if you
-prefer.
-
-This Synapse installation can then be later upgraded by using pip again with the
-update flag:
-
-```
-source ~/synapse/env/bin/activate
-pip install -U matrix-synapse[all]
-```
-
-Before you can start Synapse, you will need to generate a configuration
-file. To do this, run (in your virtualenv, as before)::
-
-```
-cd ~/synapse
-python -m synapse.app.homeserver \
-    --server-name my.domain.name \
-    --config-path homeserver.yaml \
-    --generate-config \
-    --report-stats=[yes|no]
-```
-
-... substituting an appropriate value for `--server-name`. The server name
-determines the "domain" part of user-ids for users on your server: these will
-all be of the format `@user:my.domain.name`. It also determines how other
-matrix servers will reach yours for Federation. For a test configuration,
-set this to the hostname of your server. For a more production-ready setup, you
-will probably want to specify your domain (`example.com`) rather than a
-matrix-specific hostname here (in the same way that your email address is
-probably `user@example.com` rather than `user@email.example.com`) - but
-doing so may require more advanced setup: see [Setting up Federation](docs/federate.md).
-Beware that the server name cannot be changed later.
-
-This command will generate you a config file that you can then customise, but it will
-also generate a set of keys for you. These keys will allow your Home Server to
-identify itself to other Home Servers, so don't lose or delete them. It would be
-wise to back them up somewhere safe. (If, for whatever reason, you do need to
-change your Home Server's keys, you may find that other Home Servers have the
-old key cached. If you update the signing key, you should change the name of the
-key in the `<server name>.signing.key` file (the second word) to something
-different. See the
-[spec](https://matrix.org/docs/spec/server_server/latest.html#retrieving-server-keys)
-for more information on key management.)
-
-You will need to give Synapse a TLS certficate before it will start - see [TLS
-certificates](#tls-certificates).
-
-To actually run your new homeserver, pick a working directory for Synapse to
-run (e.g. `~/synapse`), and::
-
-    cd ~/synapse
-    source env/bin/activate
-    synctl start
-
-### Platform-Specific Instructions
-
-#### Debian/Ubuntu/Raspbian
-
-Installing prerequisites on Ubuntu or Debian:
-
-```
-sudo apt-get install build-essential python3-dev libffi-dev \
-                     python-pip python-setuptools sqlite3 \
-                     libssl-dev python-virtualenv libjpeg-dev libxslt1-dev
-```
-
-#### ArchLinux
-
-Installing prerequisites on ArchLinux:
-
-```
-sudo pacman -S base-devel python python-pip \
-               python-setuptools python-virtualenv sqlite3
-```
-
-#### CentOS/Fedora
-
-Installing prerequisites on CentOS 7 or Fedora 25:
-
-```
-sudo yum install libtiff-devel libjpeg-devel libzip-devel freetype-devel \
-                 lcms2-devel libwebp-devel tcl-devel tk-devel redhat-rpm-config \
-                 python-virtualenv libffi-devel openssl-devel
-sudo yum groupinstall "Development Tools"
-```
-
-#### Mac OS X
-
-Installing prerequisites on Mac OS X:
-
-```
-xcode-select --install
-sudo easy_install pip
-sudo pip install virtualenv
-brew install pkg-config libffi
-```
-
-#### OpenSUSE
-
-Installing prerequisites on openSUSE:
-
-```
-sudo zypper in -t pattern devel_basis
-sudo zypper in python-pip python-setuptools sqlite3 python-virtualenv \
-               python-devel libffi-devel libopenssl-devel libjpeg62-devel
-```
-
-#### OpenBSD
-
-Installing prerequisites on OpenBSD:
-
-```
-doas pkg_add python libffi py-pip py-setuptools sqlite3 py-virtualenv \
-              libxslt jpeg
-```
-
-There is currently no port for OpenBSD. Additionally, OpenBSD's security
-settings require a slightly more difficult installation process.
-
-XXX: I suspect this is out of date.
-
-1. Create a new directory in `/usr/local` called `_synapse`. Also, create a
-   new user called `_synapse` and set that directory as the new user's home.
-   This is required because, by default, OpenBSD only allows binaries which need
-   write and execute permissions on the same memory space to be run from
-   `/usr/local`.
-2. `su` to the new `_synapse` user and change to their home directory.
-3. Create a new virtualenv: `virtualenv -p python2.7 ~/.synapse`
-4. Source the virtualenv configuration located at
-   `/usr/local/_synapse/.synapse/bin/activate`. This is done in `ksh` by
-   using the `.` command, rather than `bash`'s `source`.
-5. Optionally, use `pip` to install `lxml`, which Synapse needs to parse
-   webpages for their titles.
-6. Use `pip` to install this repository: `pip install matrix-synapse`
-7. Optionally, change `_synapse`'s shell to `/bin/false` to reduce the
-   chance of a compromised Synapse server being used to take over your box.
-
-After this, you may proceed with the rest of the install directions.
-
-#### Windows
-
-If you wish to run or develop Synapse on Windows, the Windows Subsystem For
-Linux provides a Linux environment on Windows 10 which is capable of using the
-Debian, Fedora, or source installation methods. More information about WSL can
-be found at https://docs.microsoft.com/en-us/windows/wsl/install-win10 for
-Windows 10 and https://docs.microsoft.com/en-us/windows/wsl/install-on-server
-for Windows Server.
-
-### Troubleshooting Installation
-
-XXX a bunch of this is no longer relevant.
-
-Synapse requires pip 8 or later, so if your OS provides too old a version you
-may need to manually upgrade it::
-
-    sudo pip install --upgrade pip
-
-Installing may fail with `Could not find any downloads that satisfy the requirement pymacaroons-pynacl (from matrix-synapse==0.12.0)`.
-You can fix this by manually upgrading pip and virtualenv::
-
-    sudo pip install --upgrade virtualenv
-
-You can next rerun `virtualenv -p python3 synapse` to update the virtual env.
-
-Installing may fail during installing virtualenv with `InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning.`
-You can fix this  by manually installing ndg-httpsclient::
-
-    pip install --upgrade ndg-httpsclient
-
-Installing may fail with `mock requires setuptools>=17.1. Aborting installation`.
-You can fix this by upgrading setuptools::
-
-    pip install --upgrade setuptools
-
-If pip crashes mid-installation for reason (e.g. lost terminal), pip may
-refuse to run until you remove the temporary installation directory it
-created. To reset the installation::
-
-    rm -rf /tmp/pip_install_matrix
-
-pip seems to leak *lots* of memory during installation.  For instance, a Linux
-host with 512MB of RAM may run out of memory whilst installing Twisted.  If this
-happens, you will have to individually install the dependencies which are
-failing, e.g.::
-
-    pip install twisted
-
-## Prebuilt packages
-
-As an alternative to installing from source, prebuilt packages are available
-for a number of platforms.
-
-### Docker images and Ansible playbooks
-
-There is an offical synapse image available at
-https://hub.docker.com/r/matrixdotorg/synapse which can be used with
-the docker-compose file available at [contrib/docker](contrib/docker). Further information on
-this including configuration options is available in the README on
-hub.docker.com.
-
-Alternatively, Andreas Peters (previously Silvio Fricke) has contributed a
-Dockerfile to automate a synapse server in a single Docker image, at
-https://hub.docker.com/r/avhost/docker-matrix/tags/
-
-Slavi Pantaleev has created an Ansible playbook,
-which installs the offical Docker image of Matrix Synapse
-along with many other Matrix-related services (Postgres database, riot-web, coturn, mxisd, SSL support, etc.).
-For more details, see
-https://github.com/spantaleev/matrix-docker-ansible-deploy
-
-
-### Debian/Ubuntu
-
-#### Matrix.org packages
-
-Matrix.org provides Debian/Ubuntu packages of the latest stable version of
-Synapse via https://matrix.org/packages/debian/. To use them:
-
-```
-sudo apt install -y lsb-release curl apt-transport-https
-echo "deb https://matrix.org/packages/debian `lsb_release -cs` main" |
-    sudo tee /etc/apt/sources.list.d/matrix-org.list
-curl "https://matrix.org/packages/debian/repo-key.asc" |
-    sudo apt-key add -
-sudo apt update
-sudo apt install matrix-synapse-py3
-```
-
-#### Downstream Debian/Ubuntu packages
-
-For `buster` and `sid`, Synapse is available in the Debian repositories and
-it should be possible to install it with simply:
-
-```
-    sudo apt install matrix-synapse
-```
-
-There is also a version of `matrix-synapse` in `stretch-backports`. Please see
-the [Debian documentation on
-backports](https://backports.debian.org/Instructions/) for information on how
-to use them.
-
-We do not recommend using the packages in downstream Ubuntu at this time, as
-they are old and suffer from known security vulnerabilities.
-
-### Fedora
-
-Synapse is in the Fedora repositories as `matrix-synapse`:
-
-```
-sudo dnf install matrix-synapse
-```
-
-Oleg Girko provides Fedora RPMs at
-https://obs.infoserver.lv/project/monitor/matrix-synapse
-
-### OpenSUSE
-
-Synapse is in the OpenSUSE repositories as `matrix-synapse`:
-
-```
-sudo zypper install matrix-synapse
-```
-
-### SUSE Linux Enterprise Server
-
-Unofficial package are built for SLES 15 in the openSUSE:Backports:SLE-15 repository at
-https://download.opensuse.org/repositories/openSUSE:/Backports:/SLE-15/standard/
-
-### ArchLinux
-
-The quickest way to get up and running with ArchLinux is probably with the community package
-https://www.archlinux.org/packages/community/any/matrix-synapse/, which should pull in most of
-the necessary dependencies.
-
-pip may be outdated (6.0.7-1 and needs to be upgraded to 6.0.8-1 ):
-
-```
-sudo pip install --upgrade pip
-```
-
-If you encounter an error with lib bcrypt causing an Wrong ELF Class:
-ELFCLASS32 (x64 Systems), you may need to reinstall py-bcrypt to correctly
-compile it under the right architecture. (This should not be needed if
-installing under virtualenv):
-
-```
-sudo pip uninstall py-bcrypt
-sudo pip install py-bcrypt
-```
-
-### FreeBSD
-
-Synapse can be installed via FreeBSD Ports or Packages contributed by Brendan Molloy from:
-
- - Ports: `cd /usr/ports/net-im/py-matrix-synapse && make install clean`
- - Packages: `pkg install py27-matrix-synapse`
-
-
-### NixOS
-
-Robin Lambertz has packaged Synapse for NixOS at:
-https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/matrix-synapse.nix
-
-# Setting up Synapse
-
-Once you have installed synapse as above, you will need to configure it.
-
-## TLS certificates
-
-The default configuration exposes a single HTTP port: http://localhost:8008. It
-is suitable for local testing, but for any practical use, you will either need
-to enable a reverse proxy, or configure Synapse to expose an HTTPS port.
-
-For information on using a reverse proxy, see
-[docs/reverse_proxy.rst](docs/reverse_proxy.rst).
-
-To configure Synapse to expose an HTTPS port, you will need to edit
-`homeserver.yaml`, as follows:
-
-* First, under the `listeners` section, uncomment the configuration for the
-  TLS-enabled listener. (Remove the hash sign (`#`) at the start of
-  each line). The relevant lines are like this:
-
-  ```
-    - port: 8448
-      type: http
-      tls: true
-      resources:
-        - names: [client, federation]
-  ```
-* You will also need to uncomment the `tls_certificate_path` and
-  `tls_private_key_path` lines under the `TLS` section. You can either
-  point these settings at an existing certificate and key, or you can
-  enable Synapse's built-in ACME (Let's Encrypt) support. Instructions
-  for having Synapse automatically provision and renew federation
-  certificates through ACME can be found at [ACME.md](docs/ACME.md). If you
-  are using your own certificate, be sure to use a `.pem` file that includes
-  the full certificate chain including any intermediate certificates (for
-  instance, if using certbot, use `fullchain.pem` as your certificate, not
-  `cert.pem`).
-
-For those of you upgrading your TLS certificate in readiness for Synapse 1.0,
-please take a look at [our guide](docs/MSC1711_certificates_FAQ.md#configuring-certificates-for-compatibility-with-synapse-100).
-
-## Registering a user
-
-You will need at least one user on your server in order to use a Matrix
-client. Users can be registered either via a Matrix client, or via a
-commandline script.
-
-To get started, it is easiest to use the command line to register new
-users. This can be done as follows:
-
-```
-$ source ~/synapse/env/bin/activate
-$ synctl start # if not already running
-$ register_new_matrix_user -c homeserver.yaml http://localhost:8008
-New user localpart: erikj
-Password:
-Confirm password:
-Make admin [no]:
-Success!
-```
-
-This process uses a setting `registration_shared_secret` in
-`homeserver.yaml`, which is shared between Synapse itself and the
-`register_new_matrix_user` script. It doesn't matter what it is (a random
-value is generated by `--generate-config`), but it should be kept secret, as
-anyone with knowledge of it can register users, including admin accounts,
-on your server even if `enable_registration` is `false`.
-
-## Setting up a TURN server
-
-For reliable VoIP calls to be routed via this homeserver, you MUST configure
-a TURN server.  See [docs/turn-howto.rst](docs/turn-howto.rst) for details.
-
-## URL previews
-
-Synapse includes support for previewing URLs, which is disabled by default.  To
-turn it on you must enable the `url_preview_enabled: True` config parameter
-and explicitly specify the IP ranges that Synapse is not allowed to spider for
-previewing in the `url_preview_ip_range_blacklist` configuration parameter.
-This is critical from a security perspective to stop arbitrary Matrix users
-spidering 'internal' URLs on your network.  At the very least we recommend that
-your loopback and RFC1918 IP addresses are blacklisted.
-
-This also requires the optional lxml and netaddr python dependencies to be
-installed.  This in turn requires the libxml2 library to be available - on
-Debian/Ubuntu this means `apt-get install libxml2-dev`, or equivalent for
-your OS.

MANIFEST.in

@@ -15,7 +15,6 @@ recursive-include docs *
 recursive-include scripts *
 recursive-include scripts-dev *
 recursive-include synapse *.pyi
-recursive-include tests *.pem
 recursive-include tests *.py
 
 recursive-include synapse/res *
@@ -38,8 +37,6 @@ prune docker
 prune .circleci
 prune .coveragerc
 prune debian
-prune .codecov.yml
-prune .buildkite
 
 exclude jenkins*
 recursive-exclude jenkins *.sh

README.rst

@@ -26,6 +26,7 @@ via IRC bridge at irc://irc.freenode.net/matrix.
 Synapse is currently in rapid development, but as of version 0.5 we believe it
 is sufficiently stable to be run as an internet-facing service for real usage!
 
+
 About Matrix
 ============
 
@@ -80,30 +81,210 @@ Thanks for using Matrix!
 Synapse Installation
 ====================
 
-.. _federation:
+Synapse is the reference Python/Twisted Matrix homeserver implementation.
 
-* For details on how to install synapse, see `<INSTALL.md>`_.
-* For specific details on how to configure Synapse for federation see `docs/federate.md <docs/federate.md>`_
+System requirements:
 
+- POSIX-compliant system (tested on Linux & OS X)
+- Python 3.5, 3.6, 3.7, or 2.7
+- At least 1GB of free RAM if you want to join large public rooms like #matrix:matrix.org
+
+Installing from source
+----------------------
+
+(Prebuilt packages are available for some platforms - see `Platform-Specific
+Instructions`_.)
+
+Synapse is written in Python but some of the libraries it uses are written in
+C. So before we can install Synapse itself we need a working C compiler and the
+header files for Python C extensions.
+
+Installing prerequisites on Ubuntu or Debian::
+
+    sudo apt-get install build-essential python3-dev libffi-dev \
+                         python-pip python-setuptools sqlite3 \
+                         libssl-dev python-virtualenv libjpeg-dev libxslt1-dev
+
+Installing prerequisites on ArchLinux::
+
+    sudo pacman -S base-devel python python-pip \
+                   python-setuptools python-virtualenv sqlite3
+
+Installing prerequisites on CentOS 7 or Fedora 25::
+
+    sudo yum install libtiff-devel libjpeg-devel libzip-devel freetype-devel \
+                     lcms2-devel libwebp-devel tcl-devel tk-devel redhat-rpm-config \
+                     python-virtualenv libffi-devel openssl-devel
+    sudo yum groupinstall "Development Tools"
+
+Installing prerequisites on Mac OS X::
+
+    xcode-select --install
+    sudo easy_install pip
+    sudo pip install virtualenv
+    brew install pkg-config libffi
+
+Installing prerequisites on Raspbian::
+
+    sudo apt-get install build-essential python3-dev libffi-dev \
+                         python-pip python-setuptools sqlite3 \
+                         libssl-dev python-virtualenv libjpeg-dev
+
+Installing prerequisites on openSUSE::
+
+    sudo zypper in -t pattern devel_basis
+    sudo zypper in python-pip python-setuptools sqlite3 python-virtualenv \
+                   python-devel libffi-devel libopenssl-devel libjpeg62-devel
+
+Installing prerequisites on OpenBSD::
+
+    doas pkg_add python libffi py-pip py-setuptools sqlite3 py-virtualenv \
+                 libxslt jpeg
+
+To install the Synapse homeserver run::
+
+    mkdir -p ~/synapse
+    virtualenv -p python3 ~/synapse/env
+    source ~/synapse/env/bin/activate
+    pip install --upgrade pip
+    pip install --upgrade setuptools
+    pip install matrix-synapse[all]
+
+This installs Synapse, along with the libraries it uses, into a virtual
+environment under ``~/synapse/env``.  Feel free to pick a different directory
+if you prefer.
+
+This Synapse installation can then be later upgraded by using pip again with the
+update flag::
+
+    source ~/synapse/env/bin/activate
+    pip install -U matrix-synapse[all]
+
+In case of problems, please see the _`Troubleshooting` section below.
+
+There is an offical synapse image available at
+https://hub.docker.com/r/matrixdotorg/synapse/tags/ which can be used with
+the docker-compose file available at `contrib/docker <contrib/docker>`_. Further information on
+this including configuration options is available in the README on
+hub.docker.com.
+
+Alternatively, Andreas Peters (previously Silvio Fricke) has contributed a
+Dockerfile to automate a synapse server in a single Docker image, at
+https://hub.docker.com/r/avhost/docker-matrix/tags/
+
+Slavi Pantaleev has created an Ansible playbook,
+which installs the offical Docker image of Matrix Synapse
+along with many other Matrix-related services (Postgres database, riot-web, coturn, mxisd, SSL support, etc.).
+For more details, see
+https://github.com/spantaleev/matrix-docker-ansible-deploy
+
+Configuring Synapse
+-------------------
+
+Before you can start Synapse, you will need to generate a configuration
+file. To do this, run (in your virtualenv, as before)::
+
+    cd ~/.synapse
+    python -m synapse.app.homeserver \
+        --server-name my.domain.name \
+        --config-path homeserver.yaml \
+        --generate-config \
+        --report-stats=[yes|no]
+
+... substituting an appropriate value for ``--server-name``. The server name
+determines the "domain" part of user-ids for users on your server: these will
+all be of the format ``@user:my.domain.name``. It also determines how other
+matrix servers will reach yours for `Federation`_. For a test configuration,
+set this to the hostname of your server. For a more production-ready setup, you
+will probably want to specify your domain (``example.com``) rather than a
+matrix-specific hostname here (in the same way that your email address is
+probably ``user@example.com`` rather than ``user@email.example.com``) - but
+doing so may require more advanced setup - see `Setting up
+Federation`_. Beware that the server name cannot be changed later.
+
+This command will generate you a config file that you can then customise, but it will
+also generate a set of keys for you. These keys will allow your Home Server to
+identify itself to other Home Servers, so don't lose or delete them. It would be
+wise to back them up somewhere safe. (If, for whatever reason, you do need to
+change your Home Server's keys, you may find that other Home Servers have the
+old key cached. If you update the signing key, you should change the name of the
+key in the ``<server name>.signing.key`` file (the second word) to something
+different. See `the spec`__ for more information on key management.)
+
+.. __: `key_management`_
+
+The default configuration exposes two HTTP ports: 8008 and 8448. Port 8008 is
+configured without TLS; it should be behind a reverse proxy for TLS/SSL
+termination on port 443 which in turn should be used for clients. Port 8448
+is configured to use TLS with a self-signed certificate. If you would like
+to do initial test with a client without having to setup a reverse proxy,
+you can temporarly use another certificate. (Note that a self-signed
+certificate is fine for `Federation`_). You can do so by changing
+``tls_certificate_path``, ``tls_private_key_path`` and ``tls_dh_params_path``
+in ``homeserver.yaml``; alternatively, you can use a reverse-proxy, but be sure
+to read `Using a reverse proxy with Synapse`_ when doing so.
+
+Apart from port 8448 using TLS, both ports are the same in the default
+configuration.
+
+Registering a user
+------------------
+
+You will need at least one user on your server in order to use a Matrix
+client. Users can be registered either `via a Matrix client`__, or via a
+commandline script.
+
+.. __: `client-user-reg`_
+
+To get started, it is easiest to use the command line to register new users::
+
+    $ source ~/synapse/env/bin/activate
+    $ synctl start # if not already running
+    $ register_new_matrix_user -c homeserver.yaml https://localhost:8448
+    New user localpart: erikj
+    Password:
+    Confirm password:
+    Make admin [no]:
+    Success!
+
+This process uses a setting ``registration_shared_secret`` in
+``homeserver.yaml``, which is shared between Synapse itself and the
+``register_new_matrix_user`` script. It doesn't matter what it is (a random
+value is generated by ``--generate-config``), but it should be kept secret, as
+anyone with knowledge of it can register users on your server even if
+``enable_registration`` is ``false``.
+
+Setting up a TURN server
+------------------------
+
+For reliable VoIP calls to be routed via this homeserver, you MUST configure
+a TURN server.  See `<docs/turn-howto.rst>`_ for details.
+
+Running Synapse
+===============
+
+To actually run your new homeserver, pick a working directory for Synapse to
+run (e.g. ``~/synapse``), and::
+
+    cd ~/synapse
+    source env/bin/activate
+    synctl start
 
 Connecting to Synapse from a client
 ===================================
 
 The easiest way to try out your new Synapse installation is by connecting to it
-from a web client.
+from a web client. The easiest option is probably the one at
+https://riot.im/app. You will need to specify a "Custom server" when you log on
+or register: set this to ``https://domain.tld`` if you setup a reverse proxy
+following the recommended setup, or ``https://localhost:8448`` - remember to specify the
+port (``:8448``) if not ``:443`` unless you changed the configuration. (Leave the identity
+server as the default - see `Identity servers`_.)
 
-Unless you are running a test instance of Synapse on your local machine, in
-general, you will need to enable TLS support before you can successfully
-connect from a client: see `<INSTALL.md#tls-certificates>`_.
-
-An easy way to get started is to login or register via Riot at
-https://riot.im/app/#/login or https://riot.im/app/#/register respectively.
-You will need to change the server you are logging into from ``matrix.org``
-and instead specify a Homeserver URL of ``https://<server_name>:8448``
-(or just ``https://<server_name>`` if you are using a reverse proxy).
-(Leave the identity server as the default - see `Identity servers`_.)
-If you prefer to use another client, refer to our
-`client breakdown <https://matrix.org/docs/projects/clients-matrix>`_.
+If using port 8448 you will run into errors until you accept the self-signed
+certificate. You can easily do this by going to ``https://localhost:8448``
+directly with your browser and accept the presented certificate. You can then
+go back in your web client and proceed further.
 
 If all goes well you should at least be able to log in, create a room, and
 start sending messages.
@@ -120,9 +301,9 @@ recommended to also set up CAPTCHA - see `<docs/CAPTCHA_SETUP.rst>`_.)
 Once ``enable_registration`` is set to ``true``, it is possible to register a
 user via `riot.im <https://riot.im/app/#/register>`_ or other Matrix clients.
 
-Your new user name will be formed partly from the ``server_name``, and partly
-from a localpart you specify when you create the account. Your name will take
-the form of::
+Your new user name will be formed partly from the ``server_name`` (see
+`Configuring synapse`_), and partly from a localpart you specify when you
+create the account. Your name will take the form of::
 
     @localpart:my.domain.name
 
@@ -131,12 +312,6 @@ the form of::
 As when logging in, you will need to specify a "Custom server".  Specify your
 desired ``localpart`` in the 'User name' box.
 
-ACME setup
-==========
-
-For details on having Synapse manage your federation TLS certificates
-automatically, please see `<docs/ACME.md>`_.
-
 
 Security Note
 =============
@@ -155,6 +330,173 @@ See https://github.com/vector-im/riot-web/issues/1977 and
 https://developer.github.com/changes/2014-04-25-user-content-security for more details.
 
 
+Platform-Specific Instructions
+==============================
+
+Debian
+------
+
+Matrix provides official Debian packages via apt from https://matrix.org/packages/debian/.
+Note that these packages do not include a client - choose one from
+https://matrix.org/docs/projects/try-matrix-now.html (or build your own with one of our SDKs :)
+
+Fedora
+------
+
+Synapse is in the Fedora repositories as ``matrix-synapse``::
+
+    sudo dnf install matrix-synapse
+
+Oleg Girko provides Fedora RPMs at
+https://obs.infoserver.lv/project/monitor/matrix-synapse
+
+OpenSUSE
+--------
+
+Synapse is in the OpenSUSE repositories as ``matrix-synapse``::
+
+    sudo zypper install matrix-synapse
+
+SUSE Linux Enterprise Server
+----------------------------
+
+Unofficial package are built for SLES 15 in the openSUSE:Backports:SLE-15 repository at
+https://download.opensuse.org/repositories/openSUSE:/Backports:/SLE-15/standard/
+
+ArchLinux
+---------
+
+The quickest way to get up and running with ArchLinux is probably with the community package
+https://www.archlinux.org/packages/community/any/matrix-synapse/, which should pull in most of
+the necessary dependencies.
+
+pip may be outdated (6.0.7-1 and needs to be upgraded to 6.0.8-1 )::
+
+    sudo pip install --upgrade pip
+
+If you encounter an error with lib bcrypt causing an Wrong ELF Class:
+ELFCLASS32 (x64 Systems), you may need to reinstall py-bcrypt to correctly
+compile it under the right architecture. (This should not be needed if
+installing under virtualenv)::
+
+    sudo pip uninstall py-bcrypt
+    sudo pip install py-bcrypt
+
+FreeBSD
+-------
+
+Synapse can be installed via FreeBSD Ports or Packages contributed by Brendan Molloy from:
+
+ - Ports: ``cd /usr/ports/net-im/py-matrix-synapse && make install clean``
+ - Packages: ``pkg install py27-matrix-synapse``
+
+
+OpenBSD
+-------
+
+There is currently no port for OpenBSD. Additionally, OpenBSD's security
+settings require a slightly more difficult installation process.
+
+1) Create a new directory in ``/usr/local`` called ``_synapse``. Also, create a
+   new user called ``_synapse`` and set that directory as the new user's home.
+   This is required because, by default, OpenBSD only allows binaries which need
+   write and execute permissions on the same memory space to be run from
+   ``/usr/local``.
+2) ``su`` to the new ``_synapse`` user and change to their home directory.
+3) Create a new virtualenv: ``virtualenv -p python2.7 ~/.synapse``
+4) Source the virtualenv configuration located at
+   ``/usr/local/_synapse/.synapse/bin/activate``. This is done in ``ksh`` by
+   using the ``.`` command, rather than ``bash``'s ``source``.
+5) Optionally, use ``pip`` to install ``lxml``, which Synapse needs to parse
+   webpages for their titles.
+6) Use ``pip`` to install this repository: ``pip install matrix-synapse``
+7) Optionally, change ``_synapse``'s shell to ``/bin/false`` to reduce the
+   chance of a compromised Synapse server being used to take over your box.
+
+After this, you may proceed with the rest of the install directions.
+
+NixOS
+-----
+
+Robin Lambertz has packaged Synapse for NixOS at:
+https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/matrix-synapse.nix
+
+Windows Install
+---------------
+
+If you wish to run or develop Synapse on Windows, the Windows Subsystem For
+Linux provides a Linux environment on Windows 10 which is capable of using the
+Debian, Fedora, or source installation methods. More information about WSL can
+be found at https://docs.microsoft.com/en-us/windows/wsl/install-win10 for
+Windows 10 and https://docs.microsoft.com/en-us/windows/wsl/install-on-server
+for Windows Server.
+
+Troubleshooting
+===============
+
+Troubleshooting Installation
+----------------------------
+
+Synapse requires pip 8 or later, so if your OS provides too old a version you
+may need to manually upgrade it::
+
+    sudo pip install --upgrade pip
+
+Installing may fail with ``Could not find any downloads that satisfy the requirement pymacaroons-pynacl (from matrix-synapse==0.12.0)``.
+You can fix this by manually upgrading pip and virtualenv::
+
+    sudo pip install --upgrade virtualenv
+
+You can next rerun ``virtualenv -p python3 synapse`` to update the virtual env.
+
+Installing may fail during installing virtualenv with ``InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning.``
+You can fix this  by manually installing ndg-httpsclient::
+
+    pip install --upgrade ndg-httpsclient
+
+Installing may fail with ``mock requires setuptools>=17.1. Aborting installation``.
+You can fix this by upgrading setuptools::
+
+    pip install --upgrade setuptools
+
+If pip crashes mid-installation for reason (e.g. lost terminal), pip may
+refuse to run until you remove the temporary installation directory it
+created. To reset the installation::
+
+    rm -rf /tmp/pip_install_matrix
+
+pip seems to leak *lots* of memory during installation.  For instance, a Linux
+host with 512MB of RAM may run out of memory whilst installing Twisted.  If this
+happens, you will have to individually install the dependencies which are
+failing, e.g.::
+
+    pip install twisted
+
+Running out of File Handles
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If synapse runs out of filehandles, it typically fails badly - live-locking
+at 100% CPU, and/or failing to accept new TCP connections (blocking the
+connecting client).  Matrix currently can legitimately use a lot of file handles,
+thanks to busy rooms like #matrix:matrix.org containing hundreds of participating
+servers.  The first time a server talks in a room it will try to connect
+simultaneously to all participating servers, which could exhaust the available
+file descriptors between DNS queries & HTTPS sockets, especially if DNS is slow
+to respond.  (We need to improve the routing algorithm used to be better than
+full mesh, but as of June 2017 this hasn't happened yet).
+
+If you hit this failure mode, we recommend increasing the maximum number of
+open file handles to be at least 4096 (assuming a default of 1024 or 256).
+This is typically done by editing ``/etc/security/limits.conf``
+
+Separately, Synapse may leak file handles if inbound HTTP requests get stuck
+during processing - e.g. blocked behind a lock or talking to a remote server etc.
+This is best diagnosed by matching up the 'Received request' and 'Processed request'
+log lines and looking for any 'Processed request' lines which take more than
+a few seconds to execute.  Please let us know at #matrix-dev:matrix.org if
+you see this failure mode so we can help debug it, however.
+
+
 Upgrading an existing Synapse
 =============================
 
@@ -164,19 +506,100 @@ versions of synapse.
 
 .. _UPGRADE.rst: UPGRADE.rst
 
+.. _federation:
+
+Setting up Federation
+=====================
+
+Federation is the process by which users on different servers can participate
+in the same room. For this to work, those other servers must be able to contact
+yours to send messages.
+
+As explained in `Configuring synapse`_, the ``server_name`` in your
+``homeserver.yaml`` file determines the way that other servers will reach
+yours. By default, they will treat it as a hostname and try to connect to
+port 8448. This is easy to set up and will work with the default configuration,
+provided you set the ``server_name`` to match your machine's public DNS
+hostname.
+
+For a more flexible configuration, you can set up a DNS SRV record. This allows
+you to run your server on a machine that might not have the same name as your
+domain name. For example, you might want to run your server at
+``synapse.example.com``, but have your Matrix user-ids look like
+``@user:example.com``. (A SRV record also allows you to change the port from
+the default 8448. However, if you are thinking of using a reverse-proxy on the
+federation port, which is not recommended, be sure to read
+`Reverse-proxying the federation port`_ first.)
+
+To use a SRV record, first create your SRV record and publish it in DNS. This
+should have the format ``_matrix._tcp.<yourdomain.com> <ttl> IN SRV 10 0 <port>
+<synapse.server.name>``. The DNS record should then look something like::
+
+    $ dig -t srv _matrix._tcp.example.com
+    _matrix._tcp.example.com. 3600    IN      SRV     10 0 8448 synapse.example.com.
+
+Note that the server hostname cannot be an alias (CNAME record): it has to point
+directly to the server hosting the synapse instance.
+
+You can then configure your homeserver to use ``<yourdomain.com>`` as the domain in
+its user-ids, by setting ``server_name``::
+
+    python -m synapse.app.homeserver \
+        --server-name <yourdomain.com> \
+        --config-path homeserver.yaml \
+        --generate-config
+    python -m synapse.app.homeserver --config-path homeserver.yaml
+
+If you've already generated the config file, you need to edit the ``server_name``
+in your ``homeserver.yaml`` file. If you've already started Synapse and a
+database has been created, you will have to recreate the database.
+
+If all goes well, you should be able to `connect to your server with a client`__,
+and then join a room via federation. (Try ``#matrix-dev:matrix.org`` as a first
+step. "Matrix HQ"'s sheer size and activity level tends to make even the
+largest boxes pause for thought.)
+
+.. __: `Connecting to Synapse from a client`_
+
+Troubleshooting
+---------------
+
+You can use the federation tester to check if your homeserver is all set:
+``https://matrix.org/federationtester/api/report?server_name=<your_server_name>``
+If any of the attributes under "checks" is false, federation won't work.
+
+The typical failure mode with federation is that when you try to join a room,
+it is rejected with "401: Unauthorized". Generally this means that other
+servers in the room couldn't access yours. (Joining a room over federation is a
+complicated dance which requires connections in both directions).
+
+So, things to check are:
+
+* If you are trying to use a reverse-proxy, read `Reverse-proxying the
+  federation port`_.
+* If you are not using a SRV record, check that your ``server_name`` (the part
+  of your user-id after the ``:``) matches your hostname, and that port 8448 on
+  that hostname is reachable from outside your network.
+* If you *are* using a SRV record, check that it matches your ``server_name``
+  (it should be ``_matrix._tcp.<server_name>``), and that the port and hostname
+  it specifies are reachable from outside your network.
+
+Running a Demo Federation of Synapses
+-------------------------------------
+
+If you want to get up and running quickly with a trio of homeservers in a
+private federation, there is a script in the ``demo`` directory. This is mainly
+useful just for development purposes. See `<demo/README>`_.
+
 
 Using PostgreSQL
 ================
 
-Synapse offers two database engines:
- * `SQLite <https://sqlite.org/>`_
- * `PostgreSQL <https://www.postgresql.org>`_
+As of Synapse 0.9, `PostgreSQL <https://www.postgresql.org>`_ is supported as an
+alternative to the `SQLite <https://sqlite.org/>`_ database that Synapse has
+traditionally used for convenience and simplicity.
 
-By default Synapse uses SQLite in and doing so trades performance for convenience.
-SQLite is only recommended in Synapse for testing purposes or for servers with 
-light workloads.
-
-Almost all installations should opt to use PostreSQL. Advantages include:
+The advantages of Postgres include:
 
 * significant performance improvements due to the superior threading and
   caching model, smarter query optimiser
@@ -188,6 +611,7 @@ Almost all installations should opt to use PostreSQL. Advantages include:
 For information on how to install and use PostgreSQL, please see
 `docs/postgres.rst <docs/postgres.rst>`_.
 
+
 .. _reverse-proxy:
 
 Using a reverse proxy with Synapse
@@ -201,7 +625,118 @@ It is recommended to put a reverse proxy such as
 doing so is that it means that you can expose the default https port (443) to
 Matrix clients without needing to run Synapse with root privileges.
 
-For information on configuring one, see `<docs/reverse_proxy.rst>`_.
+The most important thing to know here is that Matrix clients and other Matrix
+servers do not necessarily need to connect to your server via the same
+port. Indeed, clients will use port 443 by default, whereas servers default to
+port 8448. Where these are different, we refer to the 'client port' and the
+'federation port'.
+
+The next most important thing to know is that using a reverse-proxy on the
+federation port has a number of pitfalls. It is possible, but be sure to read
+`Reverse-proxying the federation port`_.
+
+The recommended setup is therefore to configure your reverse-proxy on port 443
+to port 8008 of synapse for client connections, but to also directly expose port
+8448 for server-server connections. All the Matrix endpoints begin ``/_matrix``,
+so an example nginx configuration might look like::
+
+  server {
+      listen 443 ssl;
+      listen [::]:443 ssl;
+      server_name matrix.example.com;
+
+      location /_matrix {
+          proxy_pass http://localhost:8008;
+          proxy_set_header X-Forwarded-For $remote_addr;
+      }
+  }
+
+an example Caddy configuration might look like::
+
+    matrix.example.com {
+      proxy /_matrix http://localhost:8008 {
+        transparent
+      }
+    }
+
+and an example Apache configuration might look like::
+
+    <VirtualHost *:443>
+        SSLEngine on
+        ServerName matrix.example.com;
+
+        <Location /_matrix>
+            ProxyPass http://127.0.0.1:8008/_matrix nocanon
+            ProxyPassReverse http://127.0.0.1:8008/_matrix
+        </Location>
+    </VirtualHost>
+
+You will also want to set ``bind_addresses: ['127.0.0.1']`` and ``x_forwarded: true``
+for port 8008 in ``homeserver.yaml`` to ensure that client IP addresses are
+recorded correctly.
+
+Having done so, you can then use ``https://matrix.example.com`` (instead of
+``https://matrix.example.com:8448``) as the "Custom server" when `Connecting to
+Synapse from a client`_.
+
+Reverse-proxying the federation port
+------------------------------------
+
+There are two issues to consider before using a reverse-proxy on the federation
+port:
+
+* Due to the way SSL certificates are managed in the Matrix federation protocol
+  (see `spec`__), Synapse needs to be configured with the path to the SSL
+  certificate, *even if you do not terminate SSL at Synapse*.
+
+  .. __: `key_management`_
+
+* Until v0.33.3, Synapse did not support SNI on the federation port
+  (`bug #1491 <https://github.com/matrix-org/synapse/issues/1491>`_). This bug
+  is now fixed, but means that federating with older servers can be unreliable
+  when using name-based virtual hosting.
+
+Furthermore, a number of the normal reasons for using a reverse-proxy do not
+apply:
+
+* Other servers will connect on port 8448 by default, so there is no need to
+  listen on port 443 (for federation, at least), which avoids the need for root
+  privileges and virtual hosting.
+
+* A self-signed SSL certificate is fine for federation, so there is no need to
+  automate renewals. (The certificate generated by ``--generate-config`` is
+  valid for 10 years.)
+
+If you want to set up a reverse-proxy on the federation port despite these
+caveats, you will need to do the following:
+
+* In ``homeserver.yaml``, set ``tls_certificate_path`` to the path to the SSL
+  certificate file used by your reverse-proxy, and set ``no_tls`` to ``True``.
+  (``tls_private_key_path`` will be ignored if ``no_tls`` is ``True``.)
+
+* In your reverse-proxy configuration:
+
+  * If there are other virtual hosts on the same port, make sure that the
+    *default* one uses the certificate configured above.
+
+  * Forward ``/_matrix`` to Synapse.
+
+* If your reverse-proxy is not listening on port 8448, publish a SRV record to
+  tell other servers how to find you. See `Setting up Federation`_.
+
+When updating the SSL certificate, just update the file pointed to by
+``tls_certificate_path`` and then restart Synapse. (You may like to use a symbolic link
+to help make this process atomic.)
+
+The most common mistake when setting up federation is not to tell Synapse about
+your SSL certificate. To check it, you can visit
+``https://matrix.org/federationtester/api/report?server_name=<your_server_name>``.
+Unfortunately, there is no UI for this yet, but, you should see
+``"MatchingTLSFingerprint": true``. If not, check that
+``Certificates[0].SHA256Fingerprint`` (the fingerprint of the certificate
+presented by your reverse-proxy) matches ``Keys.tls_fingerprints[0].sha256``
+(the fingerprint of the certificate Synapse is using).
+
 
 Identity Servers
 ================
@@ -233,6 +768,24 @@ an email address with your account, or send an invite to another user via their
 email address.
 
 
+URL Previews
+============
+
+Synapse 0.15.0 introduces a new API for previewing URLs at
+``/_matrix/media/r0/preview_url``.  This is disabled by default.  To turn it on
+you must enable the ``url_preview_enabled: True`` config parameter and
+explicitly specify the IP ranges that Synapse is not allowed to spider for
+previewing in the ``url_preview_ip_range_blacklist`` configuration parameter.
+This is critical from a security perspective to stop arbitrary Matrix users
+spidering 'internal' URLs on your network.  At the very least we recommend that
+your loopback and RFC1918 IP addresses are blacklisted.
+
+This also requires the optional lxml and netaddr python dependencies to be
+installed.  This in turn requires the libxml2 library to be available - on
+Debian/Ubuntu this means ``apt-get install libxml2-dev``, or equivalent for
+your OS.
+
+
 Password reset
 ==============
 
@@ -243,7 +796,8 @@ A manual password reset can be done via direct database access as follows.
 
 First calculate the hash of the new password::
 
-    $ ~/synapse/env/bin/hash_password
+    $ source ~/.synapse/bin/activate
+    $ ./scripts/hash_password
     Password:
     Confirm password:
     $2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
@@ -259,7 +813,7 @@ Synapse Development
 
 Before setting up a development environment for synapse, make sure you have the
 system dependencies (such as the python header files) installed - see
-`Installing from source <INSTALL.md#installing-from-source>`_.
+`Installing from source`_.
 
 To check out a synapse for development, clone the git repo into a working
 directory of your choice::
@@ -270,7 +824,7 @@ directory of your choice::
 Synapse has a number of external dependencies, that are easiest
 to install using pip and a virtualenv::
 
-    virtualenv -p python3 env
+    virtualenv -p python2.7 env
     source env/bin/activate
     python -m pip install -e .[all]
 
@@ -313,42 +867,16 @@ Building internal API documentation::
 
     python setup.py build_sphinx
 
-Troubleshooting
-===============
-
-Running out of File Handles
----------------------------
-
-If synapse runs out of file handles, it typically fails badly - live-locking
-at 100% CPU, and/or failing to accept new TCP connections (blocking the
-connecting client).  Matrix currently can legitimately use a lot of file handles,
-thanks to busy rooms like #matrix:matrix.org containing hundreds of participating
-servers.  The first time a server talks in a room it will try to connect
-simultaneously to all participating servers, which could exhaust the available
-file descriptors between DNS queries & HTTPS sockets, especially if DNS is slow
-to respond. (We need to improve the routing algorithm used to be better than
-full mesh, but as of March 2019 this hasn't happened yet).
-
-If you hit this failure mode, we recommend increasing the maximum number of
-open file handles to be at least 4096 (assuming a default of 1024 or 256).
-This is typically done by editing ``/etc/security/limits.conf``
-
-Separately, Synapse may leak file handles if inbound HTTP requests get stuck
-during processing - e.g. blocked behind a lock or talking to a remote server etc.
-This is best diagnosed by matching up the 'Received request' and 'Processed request'
-log lines and looking for any 'Processed request' lines which take more than
-a few seconds to execute. Please let us know at #synapse:matrix.org if
-you see this failure mode so we can help debug it, however.
 
 Help!! Synapse eats all my RAM!
--------------------------------
+===============================
 
 Synapse's architecture is quite RAM hungry currently - we deliberately
 cache a lot of recent room data and metadata in RAM in order to speed up
-common requests. We'll improve this in the future, but for now the easiest
+common requests.  We'll improve this in future, but for now the easiest
 way to either reduce the RAM usage (at the risk of slowing things down)
 is to set the almost-undocumented ``SYNAPSE_CACHE_FACTOR`` environment
-variable. The default is 0.5, which can be decreased to reduce RAM usage
+variable.  The default is 0.5, which can be decreased to reduce RAM usage
 in memory constrained enviroments, or increased if performance starts to
 degrade.
 
@@ -361,5 +889,4 @@ by installing the ``libjemalloc1`` package and adding this line to
 
     LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libjemalloc.so.1
 
-This can make a significant difference on Python 2.7 - it's unclear how
-much of an improvement it provides on Python 3.x.
+.. _`key_management`: https://matrix.org/docs/spec/server_server/unstable.html#retrieving-server-keys

UPGRADE.rst

@@ -5,20 +5,20 @@ Before upgrading check if any special steps are required to upgrade from the
 what you currently have installed to current version of synapse. The extra
 instructions that may be required are listed later in this document.
 
-1. If synapse was installed in a virtualenv then activate that virtualenv before
-   upgrading. If synapse is installed in a virtualenv in ``~/synapse/env`` then
+1. If synapse was installed in a virtualenv then active that virtualenv before
+   upgrading. If synapse is installed in a virtualenv in ``~/.synapse/`` then
    run:
 
    .. code:: bash
 
-       source ~/synapse/env/bin/activate
+       source ~/.synapse/bin/activate
 
 2. If synapse was installed using pip then upgrade to the latest version by
    running:
 
    .. code:: bash
 
-       pip install --upgrade matrix-synapse[all]
+       pip install --upgrade --process-dependency-links matrix-synapse
 
        # restart synapse
        synctl restart
@@ -31,15 +31,14 @@ instructions that may be required are listed later in this document.
 
        # Pull the latest version of the master branch.
        git pull
-
-       # Update synapse and its python dependencies.
-       pip install --upgrade .[all]
+       # Update the versions of synapse's python dependencies.
+       python synapse/python_dependencies.py | xargs pip install --upgrade
 
        # restart synapse
        ./synctl restart
 
 
-To check whether your update was successful, you can check the Server header
+To check whether your update was sucessful, you can check the Server header
 returned by the Client-Server API:
 
 .. code:: bash
@@ -49,16 +48,6 @@ returned by the Client-Server API:
     # configured on port 443.
     curl -kv https://<host.name>/_matrix/client/versions 2>&1 | grep "Server:"
 
-Upgrading to v0.99.0
-====================
-
-Please be aware that, before Synapse v1.0 is released around March 2019, you
-will need to replace any self-signed certificates with those verified by a
-root CA. Information on how to do so can be found at `the ACME docs
-<docs/ACME.md>`_.
-
-For more information on configuring TLS certificates see the `FAQ <docs/MSC1711_certificates_FAQ.md>`_.
-
 Upgrading to v0.34.0
 ====================
 

changelog.d/4406.feature

@@ -0,0 +1 @@
+Add a simple HTTP proxy option for Synapse to send federation traffic through before reaching other servers.

changelog.d/4474.misc

@@ -1 +0,0 @@
-Add test to verify threepid auth check added in #4435.

changelog.d/4555.bugfix

@@ -1 +0,0 @@
-Avoid redundant URL encoding of redirect URL for SSO login in the fallback login page. Fixes a regression introduced in [#4220](https://github.com/matrix-org/synapse/pull/4220). Contributed by Marcel Fabian Krüger ("[zaugin](https://github.com/zauguin)").

changelog.d/4942.bugfix

@@ -1 +0,0 @@
-Fix bug where presence updates were sent to all servers in a room when a new server joined, rather than to just the new server.

changelog.d/4947.feature

@@ -1 +0,0 @@
-Add ability for password provider modules to bind email addresses to users upon registration.

changelog.d/4949.misc

@@ -1 +0,0 @@
-Fix/improve some docstrings in the replication code.

changelog.d/4953.misc

@@ -1,2 +0,0 @@
-Split synapse.replication.tcp.streams into smaller files.
-

changelog.d/4954.misc

@@ -1 +0,0 @@
-Refactor replication row generation/parsing.

changelog.d/4955.bugfix

@@ -1 +0,0 @@
-Fix sync bug which made accepting invites unreliable in worker-mode synapses.

changelog.d/4956.bugfix

@@ -1 +0,0 @@
-Fix sync bug which made accepting invites unreliable in worker-mode synapses.

changelog.d/4959.misc

@@ -1 +0,0 @@
-Run `black` to clean up formatting on `synapse/storage/roommember.py` and `synapse/storage/events.py`.

changelog.d/4965.misc

@@ -1 +0,0 @@
-Remove log line for password via the admin API.

changelog.d/4968.misc

@@ -1 +0,0 @@
-Fix typo in TLS filenames in docker/README.md. Also add the '-p' commandline option to the 'docker run' example. Contributed by Jurrie Overgoor.

changelog.d/4969.misc

@@ -1,2 +0,0 @@
-Refactor room version definitions.
-

changelog.d/4974.misc

@@ -1 +0,0 @@
-Add `config.signing_key_path` that can be read by `synapse.config` utility.

changelog.d/4981.bugfix

@@ -1 +0,0 @@
-start.sh: Fix the --no-rate-limit option for messages and make it bypass rate limit on registration and login too.

changelog.d/4982.misc

@@ -1 +0,0 @@
-Track which identity server is used when binding a threepid and use that for unbinding, as per MSC1915.

changelog.d/4985.misc

@@ -1 +0,0 @@
-Rewrite KeyringTestCase as a HomeserverTestCase.

changelog.d/4987.misc

@@ -1 +0,0 @@
-README updates: Corrected the default POSTGRES_USER. Added port forwarding hint in TLS section.

changelog.d/4989.feature

@@ -1 +0,0 @@
-Remove presence list support as per MSC 1819.

changelog.d/4990.bugfix

@@ -1 +0,0 @@
-Transfer related groups on room upgrade.

changelog.d/4991.feature

@@ -1 +0,0 @@
-Reduce CPU usage starting pushers during start up.

changelog.d/4996.misc

@@ -1 +0,0 @@
-Run `black` on the remainder of `synapse/storage/`.

changelog.d/4998.misc

@@ -1 +0,0 @@
-Fix grammar in get_current_users_in_room and give it a docstring.

changelog.d/4999.bugfix

@@ -1 +0,0 @@
-Prevent the ability to kick users from a room they aren't in.

changelog.d/5002.feature

@@ -1 +0,0 @@
-Add a delete group admin API.

changelog.d/5003.bugfix

@@ -1 +0,0 @@
-Fix issue #4596 so synapse_port_db script works with --curses option on Python 3. Contributed by Anders Jensen-Waud <anders@jensenwaud.com>.

changelog.d/5007.misc

@@ -1 +0,0 @@
-Refactor synapse.storage._base._simple_select_list_paginate.

changelog.d/5010.feature

@@ -1 +0,0 @@
-Add config option to block users from looking up 3PIDs.

changelog.d/5020.feature

@@ -1 +0,0 @@
-Add context to phonehome stats.

contrib/example_log_config.yaml

@@ -19,7 +19,6 @@ handlers:
   # example output to console
   console:
     class: logging.StreamHandler
-    formatter: fmt
     filters: [context]
 
   # example output to file - to enable, edit 'root' config below.
@@ -30,7 +29,7 @@ handlers:
     maxBytes: 100000000
     backupCount: 3
     filters: [context]
-    encoding: utf8
+
 
 root:
     level: INFO

contrib/prometheus/README

@@ -6,10 +6,8 @@ To use it, first install prometheus by following the instructions at
   http://prometheus.io/
 
 ### for Prometheus v1
-
 Add a new job to the main prometheus.conf file:
 
-```yaml
   job: {
     name: "synapse"
 
@@ -17,12 +15,10 @@ Add a new job to the main prometheus.conf file:
       target: "http://SERVER.LOCATION.HERE:PORT/_synapse/metrics"
     }
   }
-```
 
 ### for Prometheus v2
 Add a new job to the main prometheus.yml file:
 
-```yaml
   - job_name: "synapse"
     metrics_path: "/_synapse/metrics"
     # when endpoint uses https:
@@ -30,14 +26,11 @@ Add a new job to the main prometheus.yml file:
 
     static_configs:
     - targets: ['SERVER.LOCATION:PORT']
-```
 
 To use `synapse.rules` add
 
-```yaml
     rule_files:
       - "/PATH/TO/synapse-v2.rules"
-```
 
 Metrics are disabled by default when running synapse; they must be enabled
 with the 'enable-metrics' option, either in the synapse config file or as a

contrib/systemd-with-workers/README.md

@@ -1,150 +0,0 @@
-# Setup Synapse with Workers and Systemd
-
-This is a setup for managing synapse with systemd including support for
-managing workers. It provides a `matrix-synapse`, as well as a
-`matrix-synapse-worker@` service for any workers you require. Additionally to
-group the required services it sets up a `matrix.target`. You can use this to
-automatically start any bot- or bridge-services. More on this in
-[Bots and Bridges](#bots-and-bridges).
-
-See the folder [system](system) for any service and target files.
-
-The folder [workers](workers) contains an example configuration for the
-`federation_reader` worker. Pay special attention to the name of the
-configuration file. In order to work with the `matrix-synapse-worker@.service`
-service, it needs to have the exact same name as the worker app.
-
-This setup expects neither the homeserver nor any workers to fork. Forking is
-handled by systemd.
-
-## Setup
-
-1. Adjust your matrix configs. Make sure that the worker config files have the
-exact same name as the worker app. Compare `matrix-synapse-worker@.service` for
-why. You can find an example worker config in the [workers](workers) folder. See
-below for relevant settings in the `homeserver.yaml`.
-2. Copy the `*.service` and `*.target` files in [system](system) to
-`/etc/systemd/system`.
-3. `systemctl enable matrix-synapse.service` this adds the homeserver
-app to the `matrix.target`
-4. *Optional.* `systemctl enable
-matrix-synapse-worker@federation_reader.service` this adds the federation_reader
-app to the `matrix-synapse.service`
-5. *Optional.* Repeat step 4 for any additional workers you require.
-6. *Optional.* Add any bots or bridges by enabling them.
-7. Start all matrix related services via `systemctl start matrix.target`
-8. *Optional.* Enable autostart of all matrix related services on system boot
-via `systemctl enable matrix.target`
-
-## Usage
-
-After you have setup you can use the following commands to manage your synapse
-installation:
-
-```
-# Start matrix-synapse, all workers and any enabled bots or bridges.
-systemctl start matrix.target
-
-# Restart matrix-synapse and all workers (not necessarily restarting bots
-# or bridges, see "Bots and Bridges")
-systemctl restart matrix-synapse.service
-
-# Stop matrix-synapse and all workers (not necessarily restarting bots
-# or bridges, see "Bots and Bridges")
-systemctl stop matrix-synapse.service
-
-# Restart a specific worker (i. e. federation_reader), the homeserver is
-# unaffected by this.
-systemctl restart matrix-synapse-worker@federation_reader.service
-
-# Add a new worker (assuming all configs are setup already)
-systemctl enable matrix-synapse-worker@federation_writer.service
-systemctl restart matrix-synapse.service
-```
-
-## The Configs
-
-Make sure the `worker_app` is set in the `homeserver.yaml` and it does not fork.
-
-```
-worker_app: synapse.app.homeserver 
-daemonize: false
-```
-
-None of the workers should fork, as forking is handled by systemd. Hence make
-sure this is present in all worker config files.
-
-```
-worker_daemonize: false
-```
-
-The config files of all workers are expected to be located in
-`/etc/matrix-synapse/workers`. If you want to use a different location you have
-to edit the provided `*.service` files accordingly.  
-
-## Bots and Bridges
-
-Most bots and bridges do not care if the homeserver goes down or is restarted.
-Depending on the implementation this may crash them though. So look up the docs
-or ask the community of the specific bridge or bot you want to run to make sure
-you choose the correct setup.
-
-Whichever configuration you choose, after the setup the following will enable
-automatically starting (and potentially restarting) your bot/bridge with the
-`matrix.target`.
-
-```
-systemctl enable <yourBotOrBridgeName>.service
-```
-
-**Note** that from an inactive synapse the bots/bridges will only be started with
-synapse if you start the `matrix.target`, not if you start the
-`matrix-synapse.service`. This is on purpose. Think of `matrix-synapse.service`
-as *just* synapse, but `matrix.target` being anything matrix related, including
-synapse and any and all enabled bots and bridges.
-
-### Start with synapse but ignore synapse going down
-
-If the bridge can handle shutdowns of the homeserver you'll want to install the
-service in the `matrix.target` and optionally add a
-`After=matrix-synapse.service` dependency to have the bot/bridge start after
-synapse on starting everything.
-
-In this case the service file should look like this.
-
-```
-[Unit]
-# ...
-# Optional, this will only ensure that if you start everything, synapse will
-# be started before the bot/bridge will be started.
-After=matrix-synapse.service
-
-[Service]
-# ...
-
-[Install]
-WantedBy=matrix.target
-```
-
-### Stop/restart when synapse stops/restarts
-
-If the bridge can't handle shutdowns of the homeserver you'll still want to
-install the service in the `matrix.target` but also have to specify the
-`After=matrix-synapse.service` *and* `BindsTo=matrix-synapse.service`
-dependencies to have the bot/bridge stop/restart with synapse.
-
-In this case the service file should look like this.
-
-```
-[Unit]
-# ...
-# Mandatory
-After=matrix-synapse.service
-BindsTo=matrix-synapse.service
-
-[Service]
-# ...
-
-[Install]
-WantedBy=matrix.target
-```

contrib/systemd-with-workers/system/matrix-synapse-worker@.service

@@ -1,17 +0,0 @@
-[Unit]
-Description=Synapse Matrix Worker
-After=matrix-synapse.service
-BindsTo=matrix-synapse.service
-
-[Service]
-Type=simple
-User=matrix-synapse
-WorkingDirectory=/var/lib/matrix-synapse
-EnvironmentFile=/etc/default/matrix-synapse
-ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.%i --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --config-path=/etc/matrix-synapse/workers/%i.yaml
-ExecReload=/bin/kill -HUP $MAINPID
-Restart=always
-RestartSec=3
-
-[Install]
-WantedBy=matrix-synapse.service

contrib/systemd-with-workers/system/matrix-synapse.service

@@ -1,16 +0,0 @@
-[Unit]
-Description=Synapse Matrix Homeserver
-
-[Service]
-Type=simple
-User=matrix-synapse
-WorkingDirectory=/var/lib/matrix-synapse
-EnvironmentFile=/etc/default/matrix-synapse
-ExecStartPre=/opt/venvs/matrix-synapse/bin/python -m synapse.app.homeserver --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --generate-keys
-ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.homeserver --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/
-ExecReload=/bin/kill -HUP $MAINPID
-Restart=always
-RestartSec=3
-
-[Install]
-WantedBy=matrix.target

contrib/systemd-with-workers/system/matrix.target

@@ -1,7 +0,0 @@
-[Unit]
-Description=Contains matrix services like synapse, bridges and bots
-After=network.target
-AllowIsolate=no
-
-[Install]
-WantedBy=multi-user.target

contrib/systemd-with-workers/workers/federation_reader.yaml

@@ -1,14 +0,0 @@
-worker_app: synapse.app.federation_reader
-
-worker_replication_host: 127.0.0.1
-worker_replication_port: 9092
-worker_replication_http_port: 9093
-
-worker_listeners:
-    - type: http
-      port: 8011
-      resources:
-          - names: [federation]
-
-worker_daemonize: false
-worker_log_config: /etc/matrix-synapse/federation-reader-log.yaml

debian/build_virtualenv

@@ -6,16 +6,7 @@
 set -e
 
 export DH_VIRTUALENV_INSTALL_ROOT=/opt/venvs
-
-# make sure that the virtualenv links to the specific version of python, by
-# dereferencing the python3 symlink.
-#
-# Otherwise, if somebody tries to install (say) the stretch package on buster,
-# they will get a confusing error about "No module named 'synapse'", because
-# python won't look in the right directory. At least this way, the error will
-# be a *bit* more obvious.
-#
-SNAKE=`readlink -e /usr/bin/python3`
+SNAKE=/usr/bin/python3
 
 # try to set the CFLAGS so any compiled C extensions are compiled with the most
 # generic as possible x64 instructions, so that compiling it on a new Intel chip
@@ -45,10 +36,6 @@ dh_virtualenv \
     --extra-pip-arg="--compile" \
     --extras="all"
 
-PACKAGE_BUILD_DIR="debian/matrix-synapse-py3"
-VIRTUALENV_DIR="${PACKAGE_BUILD_DIR}${DH_VIRTUALENV_INSTALL_ROOT}/matrix-synapse"
-TARGET_PYTHON="${VIRTUALENV_DIR}/bin/python"
-
 # we copy the tests to a temporary directory so that we can put them on the
 # PYTHONPATH without putting the uninstalled synapse on the pythonpath.
 tmpdir=`mktemp -d`
@@ -57,35 +44,5 @@ trap "rm -r $tmpdir" EXIT
 cp -r tests "$tmpdir"
 
 PYTHONPATH="$tmpdir" \
-    "${TARGET_PYTHON}" -B -m twisted.trial --reporter=text -j2 tests
-
-# build the config file
-"${TARGET_PYTHON}" -B "${VIRTUALENV_DIR}/bin/generate_config" \
-        --config-dir="/etc/matrix-synapse" \
-        --data-dir="/var/lib/matrix-synapse" |
-    perl -pe '
-# tweak the paths to the tls certs and signing keys
-/^tls_.*_path:/ and s/SERVERNAME/homeserver/;
-/^signing_key_path:/ and s/SERVERNAME/homeserver/;
-
-# tweak the pid file location
-/^pid_file:/ and s#:.*#: "/var/run/matrix-synapse.pid"#;
-
-# tweak the path to the log config
-/^log_config:/ and s/SERVERNAME\.log\.config/log.yaml/;
-
-# tweak the path to the media store
-/^media_store_path:/ and s#/media_store#/media#;
-
-# remove the server_name setting, which is set in a separate file
-/^server_name:/ and $_ = "#\n# This is set in /etc/matrix-synapse/conf.d/server_name.yaml for Debian installations.\n# $_";
-
-# remove the report_stats setting, which is set in a separate file
-/^# report_stats:/ and $_ = "";
-
-' > "${PACKAGE_BUILD_DIR}/etc/matrix-synapse/homeserver.yaml"
-
-
-# add a dependency on the right version of python to substvars.
-PYPKG=`basename $SNAKE`
-echo "synapse:pydepends=$PYPKG" >> debian/matrix-synapse-py3.substvars
+    debian/matrix-synapse-py3/opt/venvs/matrix-synapse/bin/python \
+        -B -m twisted.trial --reporter=text -j2 tests

debian/changelog

@@ -1,48 +1,3 @@
-matrix-synapse-py3 (0.99.3) stable; urgency=medium
-
-  [ Richard van der Hoff ]
-  * Fix warning during preconfiguration. (Fixes: #4819)
-
-  [ Synapse Packaging team ]
-  * New synapse release 0.99.3.
-
- -- Synapse Packaging team <packages@matrix.org>  Mon, 01 Apr 2019 12:48:21 +0000
-
-matrix-synapse-py3 (0.99.2) stable; urgency=medium
-
-  * Fix overwriting of config settings on upgrade.
-  * New synapse release 0.99.2.
-
- -- Synapse Packaging team <packages@matrix.org>  Fri, 01 Mar 2019 10:55:08 +0000
-
-matrix-synapse-py3 (0.99.1.1) stable; urgency=medium
-
-  * New synapse release 0.99.1.1
-
- -- Synapse Packaging team <packages@matrix.org>  Thu, 14 Feb 2019 17:19:44 +0000
-
-matrix-synapse-py3 (0.99.1) stable; urgency=medium
-
-  [ Damjan Georgievski ]
-  * Added ExecReload= in service unit file to send a HUP signal
-
-  [ Synapse Packaging team ]
-  * New synapse release 0.99.1
-
- -- Synapse Packaging team <packages@matrix.org>  Thu, 14 Feb 2019 14:12:26 +0000
-
-matrix-synapse-py3 (0.99.0) stable; urgency=medium
-
-  * New synapse release 0.99.0
-
- -- Synapse Packaging team <packages@matrix.org>  Tue, 5 Feb 2019 18:25:00 +0000
-
-matrix-synapse-py3 (0.34.1.1++1) stable; urgency=medium
-
-  * Update conflicts specifications to allow smoother transition from matrix-synapse.
-
- -- Synapse Packaging team <packages@matrix.org>  Sat, 12 Jan 2019 12:58:35 +0000
-
 matrix-synapse-py3 (0.34.1.1) stable; urgency=high
 
   * New synapse release 0.34.1.1

debian/config

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+set -e
+
+. /usr/share/debconf/confmodule
+
+db_input high matrix-synapse/server-name || true
+db_input high matrix-synapse/report-stats || true
+db_go

debian/control

@@ -19,16 +19,16 @@ Homepage: https://github.com/matrix-org/synapse
 Package: matrix-synapse-py3
 Architecture: amd64
 Provides: matrix-synapse
-Conflicts:
- matrix-synapse (<< 0.34.0.1-0matrix2),
- matrix-synapse (>= 0.34.0.1-1),
+Breaks:
+ matrix-synapse (<< 0.34.0-0matrix2),
+ matrix-synapse (>= 0.34.0-1),
 Pre-Depends: dpkg (>= 1.16.1)
 Depends:
  adduser,
  debconf,
  python3-distutils|libpython3-stdlib (<< 3.6),
+ python3,
  ${misc:Depends},
- ${synapse:pydepends},
 # some of our scripts use perl, but none of them are important,
 # so we put perl:Depends in Suggests rather than Depends.
 Suggests:

debian/homeserver.yaml

@@ -0,0 +1,617 @@
+# vim:ft=yaml
+# PEM encoded X509 certificate for TLS.
+# You can replace the self-signed certificate that synapse
+# autogenerates on launch with your own SSL certificate + key pair
+# if you like.  Any required intermediary certificates can be
+# appended after the primary certificate in hierarchical order.
+tls_certificate_path: "/etc/matrix-synapse/homeserver.tls.crt"
+
+# PEM encoded private key for TLS
+tls_private_key_path: "/etc/matrix-synapse/homeserver.tls.key"
+
+# PEM dh parameters for ephemeral keys
+tls_dh_params_path: "/etc/matrix-synapse/homeserver.tls.dh"
+
+# Don't bind to the https port
+no_tls: False
+
+# List of allowed TLS fingerprints for this server to publish along
+# with the signing keys for this server. Other matrix servers that
+# make HTTPS requests to this server will check that the TLS
+# certificates returned by this server match one of the fingerprints.
+#
+# Synapse automatically adds the fingerprint of its own certificate
+# to the list. So if federation traffic is handled directly by synapse
+# then no modification to the list is required.
+#
+# If synapse is run behind a load balancer that handles the TLS then it
+# will be necessary to add the fingerprints of the certificates used by
+# the loadbalancers to this list if they are different to the one
+# synapse is using.
+#
+# Homeservers are permitted to cache the list of TLS fingerprints
+# returned in the key responses up to the "valid_until_ts" returned in
+# key. It may be necessary to publish the fingerprints of a new
+# certificate and wait until the "valid_until_ts" of the previous key
+# responses have passed before deploying it.
+#
+# You can calculate a fingerprint from a given TLS listener via:
+# openssl s_client -connect $host:$port < /dev/null 2> /dev/null |
+#   openssl x509 -outform DER | openssl sha256 -binary | base64 | tr -d '='
+# or by checking matrix.org/federationtester/api/report?server_name=$host
+#
+tls_fingerprints: []
+# tls_fingerprints: [{"sha256": "<base64_encoded_sha256_fingerprint>"}]
+
+
+## Server ##
+
+# When running as a daemon, the file to store the pid in
+pid_file: "/var/run/matrix-synapse.pid"
+
+# CPU affinity mask. Setting this restricts the CPUs on which the
+# process will be scheduled. It is represented as a bitmask, with the
+# lowest order bit corresponding to the first logical CPU and the
+# highest order bit corresponding to the last logical CPU. Not all CPUs
+# may exist on a given system but a mask may specify more CPUs than are
+# present.
+#
+# For example:
+#    0x00000001  is processor #0,
+#    0x00000003  is processors #0 and #1,
+#    0xFFFFFFFF  is all processors (#0 through #31).
+#
+# Pinning a Python process to a single CPU is desirable, because Python
+# is inherently single-threaded due to the GIL, and can suffer a
+# 30-40% slowdown due to cache blow-out and thread context switching
+# if the scheduler happens to schedule the underlying threads across
+# different cores. See
+# https://www.mirantis.com/blog/improve-performance-python-programs-restricting-single-cpu/.
+#
+# cpu_affinity: 0xFFFFFFFF
+
+# The path to the web client which will be served at /_matrix/client/
+# if 'webclient' is configured under the 'listeners' configuration.
+#
+# web_client_location: "/path/to/web/root"
+
+# The public-facing base URL for the client API (not including _matrix/...)
+# public_baseurl: https://example.com:8448/
+
+# Set the soft limit on the number of file descriptors synapse can use
+# Zero is used to indicate synapse should set the soft limit to the
+# hard limit.
+soft_file_limit: 0
+
+# The GC threshold parameters to pass to `gc.set_threshold`, if defined
+# gc_thresholds: [700, 10, 10]
+
+# Set the limit on the returned events in the timeline in the get
+# and sync operations. The default value is -1, means no upper limit.
+# filter_timeline_limit: 5000
+
+# Whether room invites to users on this server should be blocked
+# (except those sent by local server admins). The default is False.
+# block_non_admin_invites: True
+
+# Restrict federation to the following whitelist of domains.
+# N.B. we recommend also firewalling your federation listener to limit
+# inbound federation traffic as early as possible, rather than relying
+# purely on this application-layer restriction.  If not specified, the
+# default is to whitelist everything.
+#
+# federation_domain_whitelist:
+#  - lon.example.com
+#  - nyc.example.com
+#  - syd.example.com
+
+# List of ports that Synapse should listen on, their purpose and their
+# configuration.
+listeners:
+  # Main HTTPS listener
+  # For when matrix traffic is sent directly to synapse.
+  -
+    # The port to listen for HTTPS requests on.
+    port: 8448
+
+    # Local addresses to listen on.
+    # On Linux and Mac OS, `::` will listen on all IPv4 and IPv6
+    # addresses by default. For most other OSes, this will only listen
+    # on IPv6.
+    bind_addresses:
+      - '::'
+      - '0.0.0.0'
+
+    # This is a 'http' listener, allows us to specify 'resources'.
+    type: http
+
+    tls: true
+
+    # Use the X-Forwarded-For (XFF) header as the client IP and not the
+    # actual client IP.
+    x_forwarded: false
+
+    # List of HTTP resources to serve on this listener.
+    resources:
+      -
+        # List of resources to host on this listener.
+        names:
+          - client     # The client-server APIs, both v1 and v2
+          - webclient  # The bundled webclient.
+
+        # Should synapse compress HTTP responses to clients that support it?
+        # This should be disabled if running synapse behind a load balancer
+        # that can do automatic compression.
+        compress: true
+
+      - names: [federation]  # Federation APIs
+        compress: false
+
+    # optional list of additional endpoints which can be loaded via
+    # dynamic modules
+    # additional_resources:
+    #   "/_matrix/my/custom/endpoint":
+    #     module: my_module.CustomRequestHandler
+    #     config: {}
+
+  # Unsecure HTTP listener,
+  # For when matrix traffic passes through loadbalancer that unwraps TLS.
+  - port: 8008
+    tls: false
+    bind_addresses: ['::', '0.0.0.0']
+    type: http
+
+    x_forwarded: false
+
+    resources:
+      - names: [client, webclient]
+        compress: true
+      - names: [federation]
+        compress: false
+
+  # Turn on the twisted ssh manhole service on localhost on the given
+  # port.
+  # - port: 9000
+  #   bind_addresses: ['::1', '127.0.0.1']
+  #   type: manhole
+
+
+# Database configuration
+database:
+  # The database engine name
+  name: "sqlite3"
+  # Arguments to pass to the engine
+  args:
+    # Path to the database
+    database: "/var/lib/matrix-synapse/homeserver.db"
+
+# Number of events to cache in memory.
+event_cache_size: "10K"
+
+
+# A yaml python logging config file
+log_config: "/etc/matrix-synapse/log.yaml"
+
+
+
+## Ratelimiting ##
+
+# Number of messages a client can send per second
+rc_messages_per_second: 0.2
+
+# Number of message a client can send before being throttled
+rc_message_burst_count: 10.0
+
+# The federation window size in milliseconds
+federation_rc_window_size: 1000
+
+# The number of federation requests from a single server in a window
+# before the server will delay processing the request.
+federation_rc_sleep_limit: 10
+
+# The duration in milliseconds to delay processing events from
+# remote servers by if they go over the sleep limit.
+federation_rc_sleep_delay: 500
+
+# The maximum number of concurrent federation requests allowed
+# from a single server
+federation_rc_reject_limit: 50
+
+# The number of federation requests to concurrently process from a
+# single server
+federation_rc_concurrent: 3
+
+
+
+# Directory where uploaded images and attachments are stored.
+media_store_path: "/var/lib/matrix-synapse/media"
+
+# Media storage providers allow media to be stored in different
+# locations.
+# media_storage_providers:
+# - module: file_system
+#   # Whether to write new local files.
+#   store_local: false
+#   # Whether to write new remote media
+#   store_remote: false
+#   # Whether to block upload requests waiting for write to this
+#   # provider to complete
+#   store_synchronous: false
+#   config:
+#     directory: /mnt/some/other/directory
+
+# Directory where in-progress uploads are stored.
+uploads_path: "/var/lib/matrix-synapse/uploads"
+
+# The largest allowed upload size in bytes
+max_upload_size: "10M"
+
+# Maximum number of pixels that will be thumbnailed
+max_image_pixels: "32M"
+
+# Whether to generate new thumbnails on the fly to precisely match
+# the resolution requested by the client. If true then whenever
+# a new resolution is requested by the client the server will
+# generate a new thumbnail. If false the server will pick a thumbnail
+# from a precalculated list.
+dynamic_thumbnails: false
+
+# List of thumbnail to precalculate when an image is uploaded.
+thumbnail_sizes:
+- width: 32
+  height: 32
+  method: crop
+- width: 96
+  height: 96
+  method: crop
+- width: 320
+  height: 240
+  method: scale
+- width: 640
+  height: 480
+  method: scale
+- width: 800
+  height: 600
+  method: scale
+
+# Is the preview URL API enabled?  If enabled, you *must* specify
+# an explicit url_preview_ip_range_blacklist of IPs that the spider is
+# denied from accessing.
+url_preview_enabled: False
+
+# List of IP address CIDR ranges that the URL preview spider is denied
+# from accessing.  There are no defaults: you must explicitly
+# specify a list for URL previewing to work.  You should specify any
+# internal services in your network that you do not want synapse to try
+# to connect to, otherwise anyone in any Matrix room could cause your
+# synapse to issue arbitrary GET requests to your internal services,
+# causing serious security issues.
+#
+# url_preview_ip_range_blacklist:
+# - '127.0.0.0/8'
+# - '10.0.0.0/8'
+# - '172.16.0.0/12'
+# - '192.168.0.0/16'
+# - '100.64.0.0/10'
+# - '169.254.0.0/16'
+#
+# List of IP address CIDR ranges that the URL preview spider is allowed
+# to access even if they are specified in url_preview_ip_range_blacklist.
+# This is useful for specifying exceptions to wide-ranging blacklisted
+# target IP ranges - e.g. for enabling URL previews for a specific private
+# website only visible in your network.
+#
+# url_preview_ip_range_whitelist:
+# - '192.168.1.1'
+
+# Optional list of URL matches that the URL preview spider is
+# denied from accessing.  You should use url_preview_ip_range_blacklist
+# in preference to this, otherwise someone could define a public DNS
+# entry that points to a private IP address and circumvent the blacklist.
+# This is more useful if you know there is an entire shape of URL that
+# you know that will never want synapse to try to spider.
+#
+# Each list entry is a dictionary of url component attributes as returned
+# by urlparse.urlsplit as applied to the absolute form of the URL.  See
+# https://docs.python.org/2/library/urlparse.html#urlparse.urlsplit
+# The values of the dictionary are treated as an filename match pattern
+# applied to that component of URLs, unless they start with a ^ in which
+# case they are treated as a regular expression match.  If all the
+# specified component matches for a given list item succeed, the URL is
+# blacklisted.
+#
+# url_preview_url_blacklist:
+# # blacklist any URL with a username in its URI
+# - username: '*'
+#
+# # blacklist all *.google.com URLs
+# - netloc: 'google.com'
+# - netloc: '*.google.com'
+#
+# # blacklist all plain HTTP URLs
+# - scheme: 'http'
+#
+# # blacklist http(s)://www.acme.com/foo
+# - netloc: 'www.acme.com'
+#   path: '/foo'
+#
+# # blacklist any URL with a literal IPv4 address
+# - netloc: '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$'
+
+# The largest allowed URL preview spidering size in bytes
+max_spider_size: "10M"
+
+
+
+
+## Captcha ##
+# See docs/CAPTCHA_SETUP for full details of configuring this.
+
+# This Home Server's ReCAPTCHA public key.
+recaptcha_public_key: "YOUR_PUBLIC_KEY"
+
+# This Home Server's ReCAPTCHA private key.
+recaptcha_private_key: "YOUR_PRIVATE_KEY"
+
+# Enables ReCaptcha checks when registering, preventing signup
+# unless a captcha is answered. Requires a valid ReCaptcha
+# public/private key.
+enable_registration_captcha: False
+
+# A secret key used to bypass the captcha test entirely.
+#captcha_bypass_secret: "YOUR_SECRET_HERE"
+
+# The API endpoint to use for verifying m.login.recaptcha responses.
+recaptcha_siteverify_api: "https://www.google.com/recaptcha/api/siteverify"
+
+
+## Turn ##
+
+# The public URIs of the TURN server to give to clients
+turn_uris: []
+
+# The shared secret used to compute passwords for the TURN server
+turn_shared_secret: "YOUR_SHARED_SECRET"
+
+# The Username and password if the TURN server needs them and
+# does not use a token
+#turn_username: "TURNSERVER_USERNAME"
+#turn_password: "TURNSERVER_PASSWORD"
+
+# How long generated TURN credentials last
+turn_user_lifetime: "1h"
+
+# Whether guests should be allowed to use the TURN server.
+# This defaults to True, otherwise VoIP will be unreliable for guests.
+# However, it does introduce a slight security risk as it allows users to
+# connect to arbitrary endpoints without having first signed up for a
+# valid account (e.g. by passing a CAPTCHA).
+turn_allow_guests: False
+
+
+## Registration ##
+
+# Enable registration for new users.
+enable_registration: False
+
+# The user must provide all of the below types of 3PID when registering.
+#
+# registrations_require_3pid:
+#     - email
+#     - msisdn
+
+# Mandate that users are only allowed to associate certain formats of
+# 3PIDs with accounts on this server.
+#
+# allowed_local_3pids:
+#     - medium: email
+#       pattern: ".*@matrix\.org"
+#     - medium: email
+#       pattern: ".*@vector\.im"
+#     - medium: msisdn
+#       pattern: "\+44"
+
+# If set, allows registration by anyone who also has the shared
+# secret, even if registration is otherwise disabled.
+# registration_shared_secret: <PRIVATE STRING>
+
+# Set the number of bcrypt rounds used to generate password hash.
+# Larger numbers increase the work factor needed to generate the hash.
+# The default number is 12 (which equates to 2^12 rounds).
+# N.B. that increasing this will exponentially increase the time required
+# to register or login - e.g. 24 => 2^24 rounds which will take >20 mins.
+bcrypt_rounds: 12
+
+# Allows users to register as guests without a password/email/etc, and
+# participate in rooms hosted on this server which have been made
+# accessible to anonymous users.
+allow_guest_access: False
+
+# The list of identity servers trusted to verify third party
+# identifiers by this server.
+trusted_third_party_id_servers:
+    - matrix.org
+    - vector.im
+    - riot.im
+
+# Users who register on this homeserver will automatically be joined
+# to these rooms
+#auto_join_rooms:
+#    - "#example:example.com"
+
+
+## Metrics ###
+
+# Enable collection and rendering of performance metrics
+enable_metrics: False
+
+## API Configuration ##
+
+# A list of event types that will be included in the room_invite_state
+room_invite_state_types:
+    - "m.room.join_rules"
+    - "m.room.canonical_alias"
+    - "m.room.avatar"
+    - "m.room.name"
+
+
+# A list of application service config file to use
+app_service_config_files: []
+
+
+# macaroon_secret_key: <PRIVATE STRING>
+
+# Used to enable access token expiration.
+expire_access_token: False
+
+## Signing Keys ##
+
+# Path to the signing key to sign messages with
+signing_key_path: "/etc/matrix-synapse/homeserver.signing.key"
+
+# The keys that the server used to sign messages with but won't use
+# to sign new messages. E.g. it has lost its private key
+old_signing_keys: {}
+#  "ed25519:auto":
+#    # Base64 encoded public key
+#    key: "The public part of your old signing key."
+#    # Millisecond POSIX timestamp when the key expired.
+#    expired_ts: 123456789123
+
+# How long key response published by this server is valid for.
+# Used to set the valid_until_ts in /key/v2 APIs.
+# Determines how quickly servers will query to check which keys
+# are still valid.
+key_refresh_interval: "1d" # 1 Day.
+
+# The trusted servers to download signing keys from.
+perspectives:
+  servers:
+    "matrix.org":
+      verify_keys:
+        "ed25519:auto":
+          key: "Noi6WqcDj0QmPxCNQqgezwTlBKrfqehY1u2FyWP9uYw"
+
+
+
+# Enable SAML2 for registration and login. Uses pysaml2
+# config_path:      Path to the sp_conf.py configuration file
+# idp_redirect_url: Identity provider URL which will redirect
+#                   the user back to /login/saml2 with proper info.
+# See pysaml2 docs for format of config.
+#saml2_config:
+#   enabled: true
+#   config_path: "/home/erikj/git/synapse/sp_conf.py"
+#   idp_redirect_url: "http://test/idp"
+
+
+
+# Enable CAS for registration and login.
+#cas_config:
+#   enabled: true
+#   server_url: "https://cas-server.com"
+#   service_url: "https://homeserver.domain.com:8448"
+#   #required_attributes:
+#   #    name: value
+
+
+# The JWT needs to contain a globally unique "sub" (subject) claim.
+#
+# jwt_config:
+#    enabled: true
+#    secret: "a secret"
+#    algorithm: "HS256"
+
+
+
+# Enable password for login.
+password_config:
+   enabled: true
+   # Uncomment and change to a secret random string for extra security.
+   # DO NOT CHANGE THIS AFTER INITIAL SETUP!
+   #pepper: ""
+
+
+
+# Enable sending emails for notification events
+# Defining a custom URL for Riot is only needed if email notifications
+# should contain links to a self-hosted installation of Riot; when set
+# the "app_name" setting is ignored.
+#
+# If your SMTP server requires authentication, the optional smtp_user &
+# smtp_pass variables should be used
+#
+#email:
+#   enable_notifs: false
+#   smtp_host: "localhost"
+#   smtp_port: 25
+#   smtp_user: "exampleusername"
+#   smtp_pass: "examplepassword"
+#   require_transport_security: False
+#   notif_from: "Your Friendly %(app)s Home Server <noreply@example.com>"
+#   app_name: Matrix
+#   template_dir: res/templates
+#   notif_template_html: notif_mail.html
+#   notif_template_text: notif_mail.txt
+#   notif_for_new_users: True
+#   riot_base_url: "http://localhost/riot"
+
+
+# password_providers:
+#     - module: "ldap_auth_provider.LdapAuthProvider"
+#       config:
+#         enabled: true
+#         uri: "ldap://ldap.example.com:389"
+#         start_tls: true
+#         base: "ou=users,dc=example,dc=com"
+#         attributes:
+#            uid: "cn"
+#            mail: "email"
+#            name: "givenName"
+#         #bind_dn:
+#         #bind_password:
+#         #filter: "(objectClass=posixAccount)"
+
+
+
+# Clients requesting push notifications can either have the body of
+# the message sent in the notification poke along with other details
+# like the sender, or just the event ID and room ID (`event_id_only`).
+# If clients choose the former, this option controls whether the
+# notification request includes the content of the event (other details
+# like the sender are still included). For `event_id_only` push, it
+# has no effect.
+
+# For modern android devices the notification content will still appear
+# because it is loaded by the app. iPhone, however will send a
+# notification saying only that a message arrived and who it came from.
+#
+#push:
+#   include_content: true
+
+
+# spam_checker:
+#     module: "my_custom_project.SuperSpamChecker"
+#     config:
+#         example_option: 'things'
+
+
+# Whether to allow non server admins to create groups on this server
+enable_group_creation: false
+
+# If enabled, non server admins can only create groups with local parts
+# starting with this prefix
+# group_creation_prefix: "unofficial/"
+
+
+
+# User Directory configuration
+#
+# 'search_all_users' defines whether to search all users visible to your HS
+# when searching the user directory, rather than limiting to users visible
+# in public rooms.  Defaults to false.  If you set it True, you'll have to run
+# UPDATE user_directory_stream_pos SET stream_id = NULL;
+# on your database to tell it to rebuild the user_directory search indexes.
+#
+#user_directory:
+#   search_all_users: false

debian/install

@@ -1,2 +1,2 @@
+debian/homeserver.yaml etc/matrix-synapse
 debian/log.yaml etc/matrix-synapse
-debian/manage_debconf.pl /opt/venvs/matrix-synapse/lib/

debian/manage_debconf.pl

@@ -1,130 +0,0 @@
-#!/usr/bin/perl
-#
-# Interface between our config files and the debconf database.
-#
-# Usage:
-#
-#   manage_debconf.pl <action>
-#
-# where <action> can be:
-#
-#   read:    read the configuration from the yaml into debconf
-#   update:  update the yaml config according to the debconf database
-use strict;
-use warnings;
-
-use Debconf::Client::ConfModule (qw/get set/);
-
-# map from the name of a setting in our .yaml file to the relevant debconf
-# setting.
-my %MAPPINGS=(
-    server_name => 'matrix-synapse/server-name',
-    report_stats => 'matrix-synapse/report-stats',
-);
-
-# enable debug if dpkg --debug
-my $DEBUG = $ENV{DPKG_MAINTSCRIPT_DEBUG};
-
-sub read_config {
-    my @files = @_;
-
-    foreach my $file (@files)  {
-        print STDERR "reading $file\n" if $DEBUG;
-
-        open my $FH, "<", $file or next;
-
-        # rudimentary parsing which (a) avoids having to depend on a yaml library,
-        # and (b) is tolerant of yaml errors
-        while($_ = <$FH>) {
-            while (my ($setting, $debconf) = each %MAPPINGS) {
-                $setting = quotemeta $setting;
-                if(/^${setting}\s*:(.*)$/) {
-                    my $val = $1;
-
-                    # remove leading/trailing whitespace
-                    $val =~ s/^\s*//;
-                    $val =~ s/\s*$//;
-
-                    # remove surrounding quotes
-                    if ($val =~ /^"(.*)"$/ || $val =~ /^'(.*)'$/) {
-                        $val = $1;
-                    }
-
-                    print STDERR ">> $debconf = $val\n" if $DEBUG;
-                    set($debconf, $val);
-                }
-            }
-        }
-        close $FH;
-    }
-}
-
-sub update_config {
-    my @files = @_;
-
-    my %substs = ();
-    while (my ($setting, $debconf) = each %MAPPINGS) {
-        my @res = get($debconf);
-        $substs{$setting} = $res[1] if $res[0] == 0;
-    }
-
-    foreach my $file (@files) {
-        print STDERR "checking $file\n" if $DEBUG;
-
-        open my $FH, "<", $file or next;
-
-        my $updated = 0;
-
-        # read the whole file into memory
-        my @lines = <$FH>;
-
-        while (my ($setting, $val) = each %substs) {
-            $setting = quotemeta $setting;
-
-            map {
-                if (/^${setting}\s*:\s*(.*)\s*$/) {
-                    my $current = $1;
-                    if ($val ne $current) {
-                        $_ = "${setting}: $val\n";
-                        $updated = 1;
-                    }
-                }
-            } @lines;
-        }
-        close $FH;
-
-        next unless $updated;
-
-        print STDERR "updating $file\n" if $DEBUG;
-        open $FH, ">", $file or die "unable to update $file";
-        print $FH @lines;
-        close $FH;
-    }
-}
-
-
-my $cmd = $ARGV[0];
-
-my $read = 0;
-my $update = 0;
-
-if (not $cmd) {
-    die "must specify a command to perform\n";
-} elsif ($cmd eq 'read') {
-    $read = 1;
-} elsif ($cmd eq 'update') {
-    $update = 1;
-} else {
-    die "unknown command '$cmd'\n";
-}
-
-my @files = (
-    "/etc/matrix-synapse/homeserver.yaml",
-    glob("/etc/matrix-synapse/conf.d/*.yaml"),
-);
-
-if ($read) {
-    read_config(@files);
-} elsif ($update) {
-    update_config(@files);
-}

debian/matrix-synapse-py3.config

@@ -1,16 +0,0 @@
-#!/bin/sh
-
-set -e
-
-. /usr/share/debconf/confmodule
-
-# try to update the debconf db according to whatever is in the config files
-#
-# note that we may get run during preconfiguration, in which case the script
-# will not yet be installed.
-[ -x /opt/venvs/matrix-synapse/lib/manage_debconf.pl ] && \
-    /opt/venvs/matrix-synapse/lib/manage_debconf.pl read
-
-db_input high matrix-synapse/server-name || true
-db_input high matrix-synapse/report-stats || true
-db_go

debian/matrix-synapse-py3.postinst

@@ -8,36 +8,19 @@ USER="matrix-synapse"
 
 case "$1" in
   configure|reconfigure)
-
-    # generate template config files if they don't exist
+    # Set server name in config file
     mkdir -p "/etc/matrix-synapse/conf.d/"
-    if [ ! -e "$CONFIGFILE_SERVERNAME" ]; then
-        cat > "$CONFIGFILE_SERVERNAME" <<EOF
-# This file is autogenerated, and will be recreated on upgrade if it is deleted.
-# Any changes you make will be preserved.
+    db_get matrix-synapse/server-name
 
-# The domain name of the server, with optional explicit port.
-# This is used by remote servers to connect to this server,
-# e.g. matrix.org, localhost:8080, etc.
-# This is also the last part of your UserID.
-#
-server_name: ''
-EOF
+    if [ "$RET" ]; then
+        echo "server_name: $RET" > $CONFIGFILE_SERVERNAME
     fi
 
-    if [ ! -e "$CONFIGFILE_REPORTSTATS" ]; then
-        cat > "$CONFIGFILE_REPORTSTATS" <<EOF
-# This file is autogenerated, and will be recreated on upgrade if it is deleted.
-# Any changes you make will be preserved.
-
-# Whether to report anonymized homeserver usage statistics.
-report_stats: false
-EOF
+    db_get matrix-synapse/report-stats
+    if [ "$RET" ]; then
+        echo "report_stats: $RET" > $CONFIGFILE_REPORTSTATS
     fi
 
-    # update the config files according to whatever is in the debconf database
-    /opt/venvs/matrix-synapse/lib/manage_debconf.pl update
-
     if ! getent passwd $USER >/dev/null; then
       adduser --quiet --system --no-create-home --home /var/lib/matrix-synapse $USER
     fi

debian/matrix-synapse.service

@@ -8,7 +8,6 @@ WorkingDirectory=/var/lib/matrix-synapse
 EnvironmentFile=/etc/default/matrix-synapse
 ExecStartPre=/opt/venvs/matrix-synapse/bin/python -m synapse.app.homeserver --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --generate-keys
 ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.homeserver --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/
-ExecReload=/bin/kill -HUP $MAINPID
 Restart=always
 RestartSec=3
 

demo/.gitignore

@@ -1,7 +0,0 @@
-*.db
-*.log
-*.log.*
-*.pid
-
-/media_store.*
-/etc

demo/demo.tls.dh

@@ -0,0 +1,9 @@
+2048-bit DH parameters taken from rfc3526
+-----BEGIN DH PARAMETERS-----
+MIIBCAKCAQEA///////////JD9qiIWjCNMTGYouA3BzRKQJOCIpnzHQCC76mOxOb
+IlFKCHmONATd75UZs806QxswKwpt8l8UN0/hNW1tUcJF5IW1dmJefsb0TELppjft
+awv/XLb0Brft7jhr+1qJn6WunyQRfEsf5kkoZlHs5Fs9wgB8uKFjvwWY2kg2HFXT
+mmkWP6j9JM9fg2VdI9yjrZYcYvNWIIVSu57VKQdwlpZtZww1Tkq8mATxdGwIyhgh
+fDKQXkYuNs474553LBgOhgObJ4Oi7Aeij7XFXfBvTFLJ3ivL9pVYFxg5lUl86pVq
+5RXSJhiY+gUQFXKOWoqsqmj//////////wIBAg==
+-----END DH PARAMETERS-----

demo/start.sh

@@ -27,27 +27,17 @@ for port in 8080 8081 8082; do
         --config-path "$DIR/etc/$port.config" \
         --report-stats no
 
-    printf '\n\n# Customisation made by demo/start.sh\n' >> $DIR/etc/$port.config
-    echo 'enable_registration: true' >> $DIR/etc/$port.config
-
     # Check script parameters
     if [ $# -eq 1 ]; then
         if [ $1 = "--no-rate-limit" ]; then
-            # messages rate limit
-            echo 'rc_messages_per_second: 1000' >> $DIR/etc/$port.config
-            echo 'rc_message_burst_count: 1000' >> $DIR/etc/$port.config
-
-            # registration rate limit
-            printf 'rc_registration:\n  per_second: 1000\n  burst_count: 1000\n' >> $DIR/etc/$port.config
-
-            # login rate limit
-            echo 'rc_login:' >> $DIR/etc/$port.config
-            printf '  address:\n    per_second: 1000\n    burst_count: 1000\n' >> $DIR/etc/$port.config
-            printf '  account:\n    per_second: 1000\n    burst_count: 1000\n' >> $DIR/etc/$port.config
-            printf '  failed_attempts:\n    per_second: 1000\n    burst_count: 1000\n' >> $DIR/etc/$port.config
+            # Set high limits in config file to disable rate limiting
+            perl -p -i -e 's/rc_messages_per_second.*/rc_messages_per_second: 1000/g' $DIR/etc/$port.config
+            perl -p -i -e 's/rc_message_burst_count.*/rc_message_burst_count: 1000/g' $DIR/etc/$port.config
         fi
     fi
 
+    perl -p -i -e 's/^enable_registration:.*/enable_registration: true/g' $DIR/etc/$port.config
+
     if ! grep -F "full_twisted_stacktraces" -q  $DIR/etc/$port.config; then
         echo "full_twisted_stacktraces: true" >> $DIR/etc/$port.config
     fi

docker/Dockerfile

@@ -1,16 +1,3 @@
-# Dockerfile to build the matrixdotorg/synapse docker images.
-#
-# To build the image, run `docker build` command from the root of the
-# synapse repository:
-#
-#    docker build -f docker/Dockerfile .
-#
-# There is an optional PYTHON_VERSION build argument which sets the
-# version of python to build against: for example:
-#
-#    docker build -f docker/Dockerfile --build-arg PYTHON_VERSION=3.6 .
-#
-
 ARG PYTHON_VERSION=2
 
 ###
@@ -44,10 +31,7 @@ RUN pip install --prefix="/install" --no-warn-script-location \
 
 # now install synapse and all of the python deps to /install.
 
-COPY synapse /synapse/synapse/
-COPY scripts /synapse/scripts/
-COPY MANIFEST.in README.rst setup.py synctl /synapse/
-
+COPY . /synapse
 RUN pip install --prefix="/install" --no-warn-script-location \
         /synapse[all]
 
@@ -72,6 +56,6 @@ COPY ./docker/conf /conf
 
 VOLUME ["/data"]
 
-EXPOSE 8008/tcp 8009/tcp 8448/tcp
+EXPOSE 8008/tcp 8448/tcp
 
 ENTRYPOINT ["/start.py"]

docker/Dockerfile-dhvirtualenv

@@ -58,11 +58,7 @@ RUN apt-get update -qq -o Acquire::Languages=none \
         sqlite3
 
 COPY --from=builder /dh-virtualenv_1.1-1_all.deb /
-
-# install dhvirtualenv. Update the apt cache again first, in case we got a
-# cached cache from docker the first time.
-RUN apt-get update -qq -o Acquire::Languages=none \
-    && apt-get install -yq /dh-virtualenv_1.1-1_all.deb
+RUN apt-get install -yq /dh-virtualenv_1.1-1_all.deb
 
 WORKDIR /synapse/source
 ENTRYPOINT ["bash","/synapse/source/docker/build_debian.sh"]

docker/README.md

@@ -1,21 +1,22 @@
 # Synapse Docker
 
-This Docker image will run Synapse as a single process. By default it uses a
-sqlite database; for production use you should connect it to a separate
-postgres database.
-
-The image also does *not* provide a TURN server.
+This Docker image will run Synapse as a single process. It does not provide a database
+server or a TURN server, you should run these separately.
 
 ## Run
 
+We do not currently offer a `latest` image, as this has somewhat undefined semantics.
+We instead release only tagged versions so upgrading between releases is entirely
+within your control.
+
 ### Using docker-compose (easier)
 
-This image is designed to run either with an automatically generated
-configuration file or with a custom configuration that requires manual editing.
+This image is designed to run either with an automatically generated configuration
+file or with a custom configuration that requires manual editing.
 
 An easy way to make use of this image is via docker-compose. See the
-[contrib/docker](../contrib/docker) section of the synapse project for
-examples.
+[contrib/docker](../contrib/docker)
+section of the synapse project for examples.
 
 ### Without Compose (harder)
 
@@ -28,11 +29,10 @@ with your postgres database.
 docker run \
     -d \
     --name synapse \
-    --mount type=volume,src=synapse-data,dst=/data \
+    -v ${DATA_PATH}:/data \
     -e SYNAPSE_SERVER_NAME=my.matrix.host \
     -e SYNAPSE_REPORT_STATS=yes \
-    -p 8448:8448 \
-    matrixdotorg/synapse:latest
+    docker.io/matrixdotorg/synapse:latest
 ```
 
 ## Volumes
@@ -53,29 +53,6 @@ In order to setup an application service, simply create an ``appservices``
 directory in the data volume and write the application service Yaml
 configuration file there. Multiple application services are supported.
 
-## TLS certificates
-
-Synapse requires a valid TLS certificate. You can do one of the following:
-
- * Provide your own certificate and key (as
-   `${DATA_PATH}/${SYNAPSE_SERVER_NAME}.tls.crt` and
-   `${DATA_PATH}/${SYNAPSE_SERVER_NAME}.tls.key`, or elsewhere by providing an
-   entire config as `${SYNAPSE_CONFIG_PATH}`). In this case, you should forward
-   traffic to port 8448 in the container, for example with `-p 443:8448`.
-
- * Use a reverse proxy to terminate incoming TLS, and forward the plain http
-   traffic to port 8008 in the container. In this case you should set `-e
-   SYNAPSE_NO_TLS=1`.
-
- * Use the ACME (Let's Encrypt) support built into Synapse. This requires
-   `${SYNAPSE_SERVER_NAME}` port 80 to be forwarded to port 8009 in the
-   container, for example with `-p 80:8009`. To enable it in the docker
-   container, set `-e SYNAPSE_ACME=1`.
-
-If you don't do any of these, Synapse will fail to start with an error similar to:
-
-    synapse.config._base.ConfigError: Error accessing file '/data/<server_name>.tls.crt' (config for tls_certificate): No such file or directory
-
 ## Environment
 
 Unless you specify a custom path for the configuration file, a very generic
@@ -89,17 +66,12 @@ Global settings:
 * ``SYNAPSE_CONFIG_PATH``, path to a custom config file
 
 If ``SYNAPSE_CONFIG_PATH`` is set, you should generate a configuration file
-then customize it manually: see [Generating a config
-file](#generating-a-config-file).
+then customize it manually. No other environment variable is required.
 
-Otherwise, a dynamic configuration file will be used.
+Otherwise, a dynamic configuration file will be used. The following environment
+variables are available for configuration:
 
-### Environment variables used to build a dynamic configuration file
-
-The following environment variables are used to build the configuration file
-when ``SYNAPSE_CONFIG_PATH`` is not set.
-
-* ``SYNAPSE_SERVER_NAME`` (mandatory), the server public hostname.
+* ``SYNAPSE_SERVER_NAME`` (mandatory), the current server public hostname.
 * ``SYNAPSE_REPORT_STATS``, (mandatory, ``yes`` or ``no``), enable anonymous
   statistics reporting back to the Matrix project which helps us to get funding.
 * ``SYNAPSE_NO_TLS``, set this variable to disable TLS in Synapse (use this if
@@ -108,6 +80,7 @@ when ``SYNAPSE_CONFIG_PATH`` is not set.
   the Synapse instance.
 * ``SYNAPSE_ALLOW_GUEST``, set this variable to allow guest joining this server.
 * ``SYNAPSE_EVENT_CACHE_SIZE``, the event cache size [default `10K`].
+* ``SYNAPSE_CACHE_FACTOR``, the cache factor [default `0.5`].
 * ``SYNAPSE_RECAPTCHA_PUBLIC_KEY``, set this variable to the recaptcha public
   key in order to enable recaptcha upon registration.
 * ``SYNAPSE_RECAPTCHA_PRIVATE_KEY``, set this variable to the recaptcha private
@@ -115,9 +88,7 @@ when ``SYNAPSE_CONFIG_PATH`` is not set.
 * ``SYNAPSE_TURN_URIS``, set this variable to the coma-separated list of TURN
   uris to enable TURN for this homeserver.
 * ``SYNAPSE_TURN_SECRET``, set this to the TURN shared secret if required.
-* ``SYNAPSE_MAX_UPLOAD_SIZE``, set this variable to change the max upload size
-  [default `10M`].
-* ``SYNAPSE_ACME``: set this to enable the ACME certificate renewal support.
+* ``SYNAPSE_MAX_UPLOAD_SIZE``, set this variable to change the max upload size [default `10M`].
 
 Shared secrets, that will be initialized to random values if not set:
 
@@ -128,53 +99,27 @@ Shared secrets, that will be initialized to random values if not set:
 
 Database specific values (will use SQLite if not set):
 
-* `POSTGRES_DB` - The database name for the synapse postgres
-  database. [default: `synapse`]
-* `POSTGRES_HOST` - The host of the postgres database if you wish to use
-  postgresql instead of sqlite3. [default: `db` which is useful when using a
-  container on the same docker network in a compose file where the postgres
-  service is called `db`]
-* `POSTGRES_PASSWORD` - The password for the synapse postgres database. **If
-  this is set then postgres will be used instead of sqlite3.** [default: none]
-  **NOTE**: You are highly encouraged to use postgresql! Please use the compose
-  file to make it easier to deploy.
-* `POSTGRES_USER` - The user for the synapse postgres database. [default:
-  `synapse`]
+* `POSTGRES_DB` - The database name for the synapse postgres database. [default: `synapse`]
+* `POSTGRES_HOST` - The host of the postgres database if you wish to use postgresql instead of sqlite3. [default: `db` which is useful when using a container on the same docker network in a compose file where the postgres service is called `db`]
+* `POSTGRES_PASSWORD` - The password for the synapse postgres database. **If this is set then postgres will be used instead of sqlite3.** [default: none] **NOTE**: You are highly encouraged to use postgresql! Please use the compose file to make it easier to deploy.
+* `POSTGRES_USER` - The user for the synapse postgres database. [default: `matrix`]
 
 Mail server specific values (will not send emails if not set):
 
 * ``SYNAPSE_SMTP_HOST``, hostname to the mail server.
-* ``SYNAPSE_SMTP_PORT``, TCP port for accessing the mail server [default
-  ``25``].
-* ``SYNAPSE_SMTP_USER``, username for authenticating against the mail server if
-  any.
-* ``SYNAPSE_SMTP_PASSWORD``, password for authenticating against the mail
-  server if any.
+* ``SYNAPSE_SMTP_PORT``, TCP port for accessing the mail server [default ``25``].
+* ``SYNAPSE_SMTP_USER``, username for authenticating against the mail server if any.
+* ``SYNAPSE_SMTP_PASSWORD``, password for authenticating against the mail server if any.
 
-### Generating a config file
+## Build
 
-It is possible to generate a basic configuration file for use with
-`SYNAPSE_CONFIG_PATH` using the `generate` commandline option. You will need to
-specify values for `SYNAPSE_CONFIG_PATH`, `SYNAPSE_SERVER_NAME` and
-`SYNAPSE_REPORT_STATS`, and mount a docker volume to store the data on. For
-example:
+Build the docker image with the `docker build` command from the root of the synapse repository.
 
 ```
-docker run -it --rm
-    --mount type=volume,src=synapse-data,dst=/data \
-    -e SYNAPSE_CONFIG_PATH=/data/homeserver.yaml \
-    -e SYNAPSE_SERVER_NAME=my.matrix.host \
-    -e SYNAPSE_REPORT_STATS=yes \
-    matrixdotorg/synapse:latest generate
+docker build -t docker.io/matrixdotorg/synapse . -f docker/Dockerfile
 ```
 
-This will generate a `homeserver.yaml` in (typically)
-`/var/lib/docker/volumes/synapse-data/_data`, which you can then customise and
-use with:
+The `-t` option sets the image tag. Official images are tagged `matrixdotorg/synapse:<version>` where `<version>` is the same as the release tag in the synapse git repository.
 
-```
-docker run -d --name synapse \
-    --mount type=volume,src=synapse-data,dst=/data \
-    -e SYNAPSE_CONFIG_PATH=/data/homeserver.yaml \
-    matrixdotorg/synapse:latest
-```
+You may have a local Python wheel cache available, in which case copy the relevant
+packages in the ``cache/`` directory at the root of the project.

docker/build_debian_packages.sh

@@ -0,0 +1,46 @@
+#!/bin/bash
+
+# Build the Debian packages using Docker images.
+#
+# This script builds the Docker images and then executes them sequentially, each
+# one building a Debian package for the targeted operating system. It is
+# designed to be a "single command" to produce all the images.
+#
+# By default, builds for all known distributions, but a list of distributions
+# can be passed on the commandline for debugging.
+
+set -ex
+
+cd `dirname $0`
+
+if [ $# -lt 1 ]; then
+    DISTS=(
+        debian:stretch
+        debian:buster
+        debian:sid
+        ubuntu:xenial
+        ubuntu:bionic
+        ubuntu:cosmic
+    )
+else
+    DISTS=("$@")
+fi
+
+# Make the dir where the debs will live.
+#
+# Note that we deliberately put this outside the source tree, otherwise we tend
+# to get source packages which are full of debs. (We could hack around that
+# with more magic in the build_debian.sh script, but that doesn't solve the
+# problem for natively-run dpkg-buildpakage).
+
+mkdir -p ../../debs
+
+# Build each OS image;
+for i in "${DISTS[@]}"; do
+    TAG=$(echo ${i} | cut -d ":" -f 2)
+    docker build --tag dh-venv-builder:${TAG} --build-arg distro=${i} -f Dockerfile-dhvirtualenv .
+    docker run -it --rm --volume=$(pwd)/../\:/synapse/source:ro --volume=$(pwd)/../../debs:/debs \
+           -e TARGET_USERID=$(id -u) \
+           -e TARGET_GROUPID=$(id -g) \
+           dh-venv-builder:${TAG}
+done

docker/conf/homeserver.yaml

@@ -2,18 +2,11 @@
 
 ## TLS ##
 
-{% if not SYNAPSE_NO_TLS %}
-
 tls_certificate_path: "/data/{{ SYNAPSE_SERVER_NAME }}.tls.crt"
 tls_private_key_path: "/data/{{ SYNAPSE_SERVER_NAME }}.tls.key"
-
-{% if SYNAPSE_ACME %}
-acme:
-    enabled: true
-    port: 8009
-{% endif %}
-
-{% endif %}
+tls_dh_params_path: "/data/{{ SYNAPSE_SERVER_NAME }}.tls.dh"
+no_tls: {{ "True" if SYNAPSE_NO_TLS else "False" }}
+tls_fingerprints: []
 
 ## Server ##
 

docker/start.py

@@ -47,8 +47,9 @@ if mode == "generate":
 
 # In normal mode, generate missing keys if any, then run synapse
 else:
+    # Parse the configuration file
     if "SYNAPSE_CONFIG_PATH" in environ:
-        config_path = environ["SYNAPSE_CONFIG_PATH"]
+        args += ["--config-path", environ["SYNAPSE_CONFIG_PATH"]]
     else:
         check_arguments(environ, ("SYNAPSE_SERVER_NAME", "SYNAPSE_REPORT_STATS"))
         generate_secrets(environ, {
@@ -57,21 +58,10 @@ else:
         })
         environ["SYNAPSE_APPSERVICES"] = glob.glob("/data/appservices/*.yaml")
         if not os.path.exists("/compiled"): os.mkdir("/compiled")
-
-        config_path = "/compiled/homeserver.yaml"
-
-        convert("/conf/homeserver.yaml", config_path, environ)
+        convert("/conf/homeserver.yaml", "/compiled/homeserver.yaml", environ)
         convert("/conf/log.config", "/compiled/log.config", environ)
         subprocess.check_output(["chown", "-R", ownership, "/data"])
-
-
-    args += [
-        "--config-path", config_path,
-
-        # tell synapse to put any generated keys in /data rather than /compiled
-        "--keys-directory", "/data",
-    ]
-
+        args += ["--config-path", "/compiled/homeserver.yaml"]
     # Generate missing keys and start synapse
     subprocess.check_output(args + ["--generate-keys"])
     os.execv("/sbin/su-exec", ["su-exec", ownership] + args)

docs/.sample_config_header.yaml

@@ -1,12 +0,0 @@
-# The config is maintained as an up-to-date snapshot of the default
-# homeserver.yaml configuration generated by Synapse.
-#
-# It is intended to act as a reference for the default configuration,
-# helping admins keep track of new options and other changes, and compare
-# their configs with the current default.  As such, many of the actual
-# config values shown are placeholders.
-#
-# It is *not* intended to be copied and used as the basis for a real
-# homeserver.yaml. Instead, if you are starting from scratch, please generate
-# a fresh config using Synapse by following the instructions in INSTALL.md.
-

docs/ACME.md

@@ -1,129 +0,0 @@
-# ACME
-
-Synapse v1.0 will require valid TLS certificates for communication between
-servers (port `8448` by default) in addition to those that are client-facing
-(port `443`). If you do not already have a valid certificate for your domain,
-the easiest way to get one is with Synapse's new ACME support, which will use
-the ACME protocol to provision a certificate automatically. Synapse v0.99.0+
-will provision server-to-server certificates automatically for you for free
-through [Let's Encrypt](https://letsencrypt.org/) if you tell it to.
-
-In the case that your `server_name` config variable is the same as
-the hostname that the client connects to, then the same certificate can be
-used between client and federation ports without issue.
-
-If your configuration file does not already have an `acme` section, you can
-generate an example config by running the `generate_config` executable. For
-example:
-
-```
-~/synapse/env3/bin/generate_config
-```
-
-You will need to provide Let's Encrypt (or another ACME provider) access to
-your Synapse ACME challenge responder on port 80, at the domain of your
-homeserver. This requires you to either change the port of the ACME listener
-provided by Synapse to a high port and reverse proxy to it, or use a tool
-like `authbind` to allow Synapse to listen on port 80 without root access.
-(Do not run Synapse with root permissions!) Detailed instructions are
-available under "ACME setup" below.
-
-If you already have certificates, you will need to back up or delete them
-(files `example.com.tls.crt` and `example.com.tls.key` in Synapse's root
-directory), Synapse's ACME implementation will not overwrite them.
-
-You may wish to use alternate methods such as Certbot to obtain a certificate
-from Let's Encrypt, depending on your server configuration. Of course, if you
-already have a valid certificate for your homeserver's domain, that can be
-placed in Synapse's config directory without the need for any ACME setup.
-
-## ACME setup
-
-The main steps for enabling ACME support in short summary are:
-
-1. Allow Synapse to listen for incoming ACME challenges.
-1. Enable ACME support in `homeserver.yaml`.
-1. Move your old certificates (files `example.com.tls.crt` and `example.com.tls.key` out of the way if they currently exist at the paths specified in `homeserver.yaml`.
-1. Restart Synapse.
-
-Detailed instructions for each step are provided below.
-
-### Listening on port 80
-
-In order for Synapse to complete the ACME challenge to provision a
-certificate, it needs access to port 80. Typically listening on port 80 is
-only granted to applications running as root. There are thus two solutions to
-this problem.
-
-#### Using a reverse proxy
-
-A reverse proxy such as Apache or nginx allows a single process (the web
-server) to listen on port 80 and proxy traffic to the appropriate program
-running on your server. It is the recommended method for setting up ACME as
-it allows you to use your existing webserver while also allowing Synapse to
-provision certificates as needed.
-
-For nginx users, add the following line to your existing `server` block:
-
-```
-location /.well-known/acme-challenge {
-    proxy_pass http://localhost:8009;
-}
-```
-
-For Apache, add the following to your existing webserver config:
-
-```
-ProxyPass /.well-known/acme-challenge http://localhost:8009/.well-known/acme-challenge
-```
-
-Make sure to restart/reload your webserver after making changes.
-
-Now make the relevant changes in `homeserver.yaml` to enable ACME support:
-
-```
-acme:
-    enabled: true
-    port: 8009
-```
-
-#### Authbind
-
-`authbind` allows a program which does not run as root to bind to
-low-numbered ports in a controlled way. The setup is simpler, but requires a
-webserver not to already be running on port 80. **This includes every time
-Synapse renews a certificate**, which may be cumbersome if you usually run a
-web server on port 80. Nevertheless, if you're sure port 80 is not being used
-for any other purpose then all that is necessary is the following:
-
-Install `authbind`. For example, on Debian/Ubuntu:
-
-```
-sudo apt-get install authbind
-```
-
-Allow `authbind` to bind port 80:
-
-```
-sudo touch /etc/authbind/byport/80
-sudo chmod 777 /etc/authbind/byport/80
-```
-
-When Synapse is started, use the following syntax:
-
-```
-authbind --deep <synapse start command>
-```
-
-Make the relevant changes in `homeserver.yaml` to enable ACME support:
-
-```
-acme:
-    enabled: true
-```
-
-### (Re)starting synapse
-
-Ensure that the certificate paths specified in `homeserver.yaml` (`tls_certificate_path` and `tls_private_key_path`) do not currently point to any files. Synapse will not provision certificates if files exist, as it does not want to overwrite existing certificates.
-
-Finally, start/restart Synapse.

docs/MSC1711_certificates_FAQ.md

@@ -1,338 +0,0 @@
-# MSC1711 Certificates FAQ
-
-The goal of Synapse 0.99.0 is to act as a stepping stone to Synapse 1.0.0. It
-supports the r0.1 release of the server to server specification, but is
-compatible with both the legacy Matrix federation behaviour (pre-r0.1) as well
-as post-r0.1 behaviour, in order to allow for a smooth upgrade across the
-federation.
-
-The most important thing to know is that Synapse 1.0.0 will require a valid TLS
-certificate on federation endpoints. Self signed certificates will not be
-sufficient.
-
-Synapse 0.99.0 makes it easy to configure TLS certificates and will
-interoperate with both >= 1.0.0 servers as well as existing servers yet to
-upgrade.
-
-**It is critical that all admins upgrade to 0.99.0 and configure a valid TLS
-certificate.** Admins will have 1 month to do so, after which 1.0.0 will be
-released and those servers without a valid certificate will not longer be able
-to federate with >= 1.0.0 servers.
-
-Full details on how to carry out this configuration change is given
-[below](#configuring-certificates-for-compatibility-with-synapse-100). A
-timeline and some frequently asked questions are also given below.
-
-For more details and context on the release of the r0.1 Server/Server API and
-imminent Matrix 1.0 release, you can also see our
-[main talk from FOSDEM 2019](https://matrix.org/blog/2019/02/04/matrix-at-fosdem-2019/).
-
-## Contents
-* Timeline
-* Configuring certificates for compatibility with Synapse 1.0
-* FAQ
-  * Synapse 0.99.0 has just been released, what do I need to do right now?
-  * How do I upgrade?
-  * What will happen if I do not set up a valid federation certificate
-    immediately?
-  * What will happen if I do nothing at all?
-  * When do I need a SRV record or .well-known URI?
-  * Can I still use an SRV record?
-  * I have created a .well-known URI. Do I still need an SRV record?
-  * It used to work just fine, why are you breaking everything?
-  * Can I manage my own certificates rather than having Synapse renew
-    certificates itself?
-  * Do you still recommend against using a reverse proxy on the federation port?
-  * Do I still need to give my TLS certificates to Synapse if I am using a
-    reverse proxy?
-  * Do I need the same certificate for the client and federation port?
-  * How do I tell Synapse to reload my keys/certificates after I replace them?
-
-## Timeline
-
-**5th Feb 2019  - Synapse 0.99.0 is released.**
-
-All server admins are encouraged to upgrade.
-
-0.99.0:
-
--   provides support for ACME to make setting up Let's Encrypt certs easy, as
-    well as .well-known support.
-
--   does not enforce that a valid CA cert is present on the federation API, but
-    rather makes it easy to set one up.
-
--   provides support for .well-known
-
-Admins should upgrade and configure a valid CA cert. Homeservers that require a
-.well-known entry (see below), should retain their SRV record and use it
-alongside their .well-known record.
-
-**>= 5th March 2019  - Synapse 1.0.0 is released**
-
-1.0.0 will land no sooner than 1 month after 0.99.0, leaving server admins one
-month after 5th February to upgrade to 0.99.0 and deploy their certificates. In
-accordance with the the [S2S spec](https://matrix.org/docs/spec/server_server/r0.1.0.html)
-1.0.0 will enforce certificate validity. This means that any homeserver without a
-valid certificate after this point will no longer be able to federate with
-1.0.0 servers.
-
-
-## Configuring certificates for compatibility with Synapse 1.0.0
-
-### If you do not currently have an SRV record
-
-In this case, your `server_name` points to the host where your Synapse is
-running. There is no need to create a `.well-known` URI or an SRV record, but
-you will need to give Synapse a valid, signed, certificate.
-
-The easiest way to do that is with Synapse's built-in ACME (Let's Encrypt)
-support. Full details are in [ACME.md](./ACME.md) but, in a nutshell:
-
- 1. Allow Synapse to listen on port 80 with `authbind`, or forward it from a
-    reverse proxy.
- 2. Enable acme support in `homeserver.yaml`.
- 3. Move your old certificates out of the way.
- 4. Restart Synapse.
-
-### If you do have an SRV record currently
-
-If you are using an SRV record, your matrix domain (`server_name`) may not
-point to the same host that your Synapse is running on (the 'target
-domain'). (If it does, you can follow the recommendation above; otherwise, read
-on.)
-
-Let's assume that your `server_name` is `example.com`, and your Synapse is
-hosted at a target domain of `customer.example.net`. Currently you should have
-an SRV record which looks like:
-
-```
-_matrix._tcp.example.com. IN SRV 10 5 8000 customer.example.net.
-```
-
-In this situation, you have three choices for how to proceed:
-
-#### Option 1: give Synapse a certificate for your matrix domain
-
-Synapse 1.0 will expect your server to present a TLS certificate for your
-`server_name` (`example.com` in the above example). You can achieve this by
-doing one of the following:
-
- * Acquire a certificate for the `server_name` yourself (for example, using
-   `certbot`), and give it and the key to Synapse via `tls_certificate_path`
-   and `tls_private_key_path`, or:
-
- * Use Synapse's [ACME support](./ACME.md), and forward port 80 on the
-   `server_name` domain to your Synapse instance.
-
-#### Option 2: run Synapse behind a reverse proxy
-
-If you have an existing reverse proxy set up with correct TLS certificates for
-your domain, you can simply route all traffic through the reverse proxy by
-updating the SRV record appropriately (or removing it, if the proxy listens on
-8448).
-
-See [reverse_proxy.rst](reverse_proxy.rst) for information on setting up a
-reverse proxy.
-
-#### Option 3: add a .well-known file to delegate your matrix traffic
-
-This will allow you to keep Synapse on a separate domain, without having to
-give it a certificate for the matrix domain.
-
-You can do this with a `.well-known` file as follows:
-
- 1. Keep the SRV record in place - it is needed for backwards compatibility
-    with Synapse 0.34 and earlier.
-
- 2. Give synapse a certificate corresponding to the target domain
-    (`customer.example.net` in the above example). Currently Synapse's ACME
-    support [does not support
-    this](https://github.com/matrix-org/synapse/issues/4552), so you will have
-    to acquire a certificate yourself and give it to Synapse via
-    `tls_certificate_path` and `tls_private_key_path`.
-
- 3. Restart Synapse to ensure the new certificate is loaded.
-
- 4. Arrange for a `.well-known` file at
-    `https://<server_name>/.well-known/matrix/server` with contents:
-
-    ```json
-    {"m.server": "<target server name>"}
-    ```
-
-    where the target server name is resolved as usual (i.e. SRV lookup, falling
-    back to talking to port 8448).
-
-    In the above example, where synapse is listening on port 8000,
-    `https://example.com/.well-known/matrix/server` should have `m.server` set to one of:
-
-    1. `customer.example.net` ─ with a SRV record on
-       `_matrix._tcp.customer.example.com` pointing to port 8000, or:
-
-    2. `customer.example.net` ─ updating synapse to listen on the default port
-       8448, or:
-
-    3. `customer.example.net:8000` ─ ensuring that if there is a reverse proxy
-       on `customer.example.net:8000` it correctly handles HTTP requests with
-       Host header set to `customer.example.net:8000`.
-
-
-## FAQ
-
-### Synapse 0.99.0 has just been released, what do I need to do right now?
-
-Upgrade as soon as you can in preparation for Synapse 1.0.0, and update your
-TLS certificates as [above](#configuring-certificates-for-compatibility-with-synapse-100).
-
-### What will happen if I do not set up a valid federation certificate immediately?
-
-Nothing initially, but once 1.0.0 is in the wild it will not be possible to
-federate with 1.0.0 servers.
-
-### What will happen if I do nothing at all?
-
-If the admin takes no action at all, and remains on a Synapse < 0.99.0 then the
-homeserver will be unable to federate with those who have implemented
-.well-known. Then, as above, once the month upgrade window has expired the
-homeserver will not be able to federate with any Synapse >= 1.0.0
-
-### When do I need a SRV record or .well-known URI?
-
-If your homeserver listens on the default federation port (8448), and your
-`server_name` points to the host that your homeserver runs on, you do not need an
-SRV record or `.well-known/matrix/server` URI.
-
-For instance, if you registered `example.com` and pointed its DNS A record at a
-fresh Upcloud VPS or similar, you could install Synapse 0.99 on that host,
-giving it a server_name of `example.com`, and it would automatically generate a
-valid TLS certificate for you via Let's Encrypt and no SRV record or
-`.well-known` URI would be needed.
-
-This is the common case, although you can add an SRV record or
-`.well-known/matrix/server` URI for completeness if you wish.
-
-**However**, if your server does not listen on port 8448, or if your `server_name`
-does not point to the host that your homeserver runs on, you will need to let
-other servers know how to find it.
-
-In this case, you should see ["If you do have an SRV record
-currently"](#if-you-do-have-an-srv-record-currently) above.
-
-### Can I still use an SRV record?
-
-Firstly, if you didn't need an SRV record before (because your server is
-listening on port 8448 of your server_name), you certainly don't need one now:
-the defaults are still the same.
-
-If you previously had an SRV record, you can keep using it provided you are
-able to give Synapse a TLS certificate corresponding to your server name. For
-example, suppose you had the following SRV record, which directs matrix traffic
-for example.com to matrix.example.com:443:
-
-```
-_matrix._tcp.example.com. IN SRV 10 5 443 matrix.example.com
-```
-
-In this case, Synapse must be given a certificate for example.com - or be
-configured to acquire one from Let's Encrypt.
-
-If you are unable to give Synapse a certificate for your server_name, you will
-also need to use a .well-known URI instead. However, see also "I have created a
-.well-known URI. Do I still need an SRV record?".
-
-### I have created a .well-known URI. Do I still need an SRV record?
-
-As of Synapse 0.99, Synapse will first check for the existence of a `.well-known`
-URI and follow any delegation it suggests. It will only then check for the
-existence of an SRV record.
-
-That means that the SRV record will often be redundant. However, you should
-remember that there may still be older versions of Synapse in the federation
-which do not understand `.well-known` URIs, so if you removed your SRV record you
-would no longer be able to federate with them.
-
-It is therefore best to leave the SRV record in place for now. Synapse 0.34 and
-earlier will follow the SRV record (and not care about the invalid
-certificate). Synapse 0.99 and later will follow the .well-known URI, with the
-correct certificate chain.
-
-### It used to work just fine, why are you breaking everything?
-
-We have always wanted Matrix servers to be as easy to set up as possible, and
-so back when we started federation in 2014 we didn't want admins to have to go
-through the cumbersome process of buying a valid TLS certificate to run a
-server. This was before Let's Encrypt came along and made getting a free and
-valid TLS certificate straightforward. So instead, we adopted a system based on
-[Perspectives](https://en.wikipedia.org/wiki/Convergence_(SSL)): an approach
-where you check a set of "notary servers" (in practice, homeservers) to vouch
-for the validity of a certificate rather than having it signed by a CA. As long
-as enough different notaries agree on the certificate's validity, then it is
-trusted.
-
-However, in practice this has never worked properly. Most people only use the
-default notary server (matrix.org), leading to inadvertent centralisation which
-we want to eliminate. Meanwhile, we never implemented the full consensus
-algorithm to query the servers participating in a room to determine consensus
-on whether a given certificate is valid. This is fiddly to get right
-(especially in face of sybil attacks), and we found ourselves questioning
-whether it was worth the effort to finish the work and commit to maintaining a
-secure certificate validation system as opposed to focusing on core Matrix
-development.
-
-Meanwhile, Let's Encrypt came along in 2016, and put the final nail in the
-coffin of the Perspectives project (which was already pretty dead). So, the
-Spec Core Team decided that a better approach would be to mandate valid TLS
-certificates for federation alongside the rest of the Web. More details can be
-found in
-[MSC1711](https://github.com/matrix-org/matrix-doc/blob/master/proposals/1711-x509-for-federation.md#background-the-failure-of-the-perspectives-approach).
-
-This results in a breaking change, which is disruptive, but absolutely critical
-for the security model. However, the existence of Let's Encrypt as a trivial
-way to replace the old self-signed certificates with valid CA-signed ones helps
-smooth things over massively, especially as Synapse can now automate Let's
-Encrypt certificate generation if needed.
-
-### Can I manage my own certificates rather than having Synapse renew certificates itself?
-
-Yes, you are welcome to manage your certificates yourself. Synapse will only
-attempt to obtain certificates from Let's Encrypt if you configure it to do
-so.The only requirement is that there is a valid TLS cert present for
-federation end points.
-
-### Do you still recommend against using a reverse proxy on the federation port?
-
-We no longer actively recommend against using a reverse proxy. Many admins will
-find it easier to direct federation traffic to a reverse proxy and manage their
-own TLS certificates, and this is a supported configuration.
-
-See [reverse_proxy.rst](reverse_proxy.rst) for information on setting up a
-reverse proxy.
-
-### Do I still need to give my TLS certificates to Synapse if I am using a reverse proxy?
-
-Practically speaking, this is no longer necessary.
-
-If you are using a reverse proxy for all of your TLS traffic, then you can set
-`no_tls: True`. In that case, the only reason Synapse needs the certificate is
-to populate a legacy 'tls_fingerprints' field in the federation API. This is
-ignored by Synapse 0.99.0 and later, and the only time pre-0.99 Synapses will
-check it is when attempting to fetch the server keys - and generally this is
-delegated via `matrix.org`, which is on 0.99.0.
-
-However, there is a bug in Synapse 0.99.0
-[4554](<https://github.com/matrix-org/synapse/issues/4554>) which prevents
-Synapse from starting if you do not give it a TLS certificate. To work around
-this, you can give it any TLS certificate at all. This will be fixed soon.
-
-### Do I need the same certificate for the client and federation port?
-
-No. There is nothing stopping you from using different certificates,
-particularly if you are using a reverse proxy. However, Synapse will use the
-same certificate on any ports where TLS is configured.
-
-### How do I tell Synapse to reload my keys/certificates after I replace them?
-
-Synapse will reload the keys and certificates when it receives a SIGHUP - for
-example `kill -HUP $(cat homeserver.pid)`. Alternatively, simply restart
-Synapse, though this will result in downtime while it restarts.

docs/admin_api/delete_group.md

@@ -1,14 +0,0 @@
-# Delete a local group
-
-This API lets a server admin delete a local group. Doing so will kick all
-users out of the group so that their clients will correctly handle the group
-being deleted.
-
-
-The API is:
-
-```
-POST /_matrix/client/r0/admin/delete_group/<group_id>
-```
-
-including an `access_token` of a server admin.

docs/admin_api/version_api.rst

@@ -1,22 +0,0 @@
-Version API
-===========
-
-This API returns the running Synapse version and the Python version
-on which Synapse is being run. This is useful when a Synapse instance
-is behind a proxy that does not forward the 'Server' header (which also
-contains Synapse version information).
-
-The api is::
-
-    GET /_matrix/client/r0/admin/server_version
-
-including an ``access_token`` of a server admin.
-
-It returns a JSON body like the following:
-
-.. code:: json
-
-    {
-        "server_version": "0.99.2rc1 (b=develop, abcdef123)",
-        "python_version": "3.6.8"
-    }

docs/federate.md

@@ -1,123 +0,0 @@
-Setting up Federation
-=====================
-
-Federation is the process by which users on different servers can participate
-in the same room. For this to work, those other servers must be able to contact
-yours to send messages.
-
-The ``server_name`` configured in the Synapse configuration file (often
-``homeserver.yaml``) defines how resources (users, rooms, etc.) will be
-identified (eg: ``@user:example.com``, ``#room:example.com``). By
-default, it is also the domain that other servers will use to
-try to reach your server (via port 8448). This is easy to set
-up and will work provided you set the ``server_name`` to match your
-machine's public DNS hostname, and provide Synapse with a TLS certificate
-which is valid for your ``server_name``.
-
-Once you have completed the steps necessary to federate, you should be able to 
-join a room via federation. (A good place to start is ``#synapse:matrix.org`` - a 
-room for Synapse admins.)
-
-
-## Delegation
-
-For a more flexible configuration, you can have ``server_name``
-resources (eg: ``@user:example.com``) served by a different host and
-port (eg: ``synapse.example.com:443``). There are two ways to do this:
-
-- adding a ``/.well-known/matrix/server`` URL served on ``https://example.com``.
-- adding a DNS ``SRV`` record in the DNS zone of domain
-  ``example.com``.
-
-Without configuring delegation, the matrix federation will
-expect to find your server via ``example.com:8448``. The following methods
-allow you retain a `server_name` of `example.com` so that your user IDs, room
-aliases, etc continue to look like `*:example.com`, whilst having your
-federation traffic routed to a different server.
-
-### .well-known delegation
-
-To use this method, you need to be able to alter the
-``server_name`` 's https server to serve the ``/.well-known/matrix/server``
-URL. Having an active server (with a valid TLS certificate) serving your
-``server_name`` domain is out of the scope of this documentation.
-
-The URL ``https://<server_name>/.well-known/matrix/server`` should
-return a JSON structure containing the key ``m.server`` like so:
-
-    {
-	    "m.server": "<synapse.server.name>[:<yourport>]"
-    }
-
-In our example, this would mean that URL ``https://example.com/.well-known/matrix/server``
-should return:
-
-    {
-	    "m.server": "synapse.example.com:443"
-    }
-
-Note, specifying a port is optional. If a port is not specified an SRV lookup
-is performed, as described below. If the target of the
-delegation does not have an SRV record, then the port defaults to 8448.
-
-Most installations will not need to configure .well-known. However, it can be
-useful in cases where the admin is hosting on behalf of someone else and
-therefore cannot gain access to the necessary certificate. With .well-known,
-federation servers will check for a valid TLS certificate for the delegated
-hostname (in our example: ``synapse.example.com``).
-
-.well-known support first appeared in Synapse v0.99.0. To federate with older
-servers you may need to additionally configure SRV delegation. Alternatively,
-encourage the server admin in question to upgrade :).
-
-### DNS SRV delegation
-
-To use this delegation method, you need to have write access to your
-``server_name`` 's domain zone DNS records (in our example it would be
-``example.com`` DNS zone).
-
-This method requires the target server to provide a
-valid TLS certificate for the original ``server_name``.
-
-You need to add a SRV record in your ``server_name`` 's DNS zone with
-this format:
-
-     _matrix._tcp.<yourdomain.com> <ttl> IN SRV <priority> <weight> <port> <synapse.server.name>
-
-In our example, we would need to add this SRV record in the
-``example.com`` DNS zone:
-
-     _matrix._tcp.example.com. 3600 IN SRV 10 5 443 synapse.example.com.
-
-Once done and set up, you can check the DNS record with ``dig -t srv
-_matrix._tcp.<server_name>``. In our example, we would expect this:
-
-    $ dig -t srv _matrix._tcp.example.com
-    _matrix._tcp.example.com. 3600    IN      SRV     10 0 443 synapse.example.com.
-
-Note that the target of a SRV record cannot be an alias (CNAME record): it has to point
-directly to the server hosting the synapse instance.
-
-## Troubleshooting
-
-You can use the [federation tester](
-<https://matrix.org/federationtester>) to check if your homeserver is
-configured correctly. Alternatively try the [JSON API used by the federation tester](https://matrix.org/federationtester/api/report?server_name=DOMAIN).
-Note that you'll have to modify this URL to replace ``DOMAIN`` with your
-``server_name``. Hitting the API directly provides extra detail.
-
-The typical failure mode for federation is that when the server tries to join
-a room, it is rejected with "401: Unauthorized". Generally this means that other
-servers in the room could not access yours. (Joining a room over federation is
-a complicated dance which requires connections in both directions).
-
-Another common problem is that people on other servers can't join rooms that
-you invite them to. This can be caused by an incorrectly-configured reverse
-proxy: see [reverse_proxy.rst](<reverse_proxy.rst>) for instructions on how to correctly
-configure a reverse proxy.
-
-## Running a Demo Federation of Synapses
-
-If you want to get up and running quickly with a trio of homeservers in a
-private federation, there is a script in the ``demo`` directory. This is mainly
-useful just for development purposes. See [demo/README](<../demo/README>).

docs/password_auth_providers.rst

@@ -75,20 +75,6 @@ Password auth provider classes may optionally provide the following methods.
     result from the ``/login`` call (including ``access_token``, ``device_id``,
     etc.)
 
-``someprovider.check_3pid_auth``\(*medium*, *address*, *password*)
-
-    This method, if implemented, is called when a user attempts to register or
-    log in with a third party identifier, such as email. It is passed the
-    medium (ex. "email"), an address (ex. "jdoe@example.com") and the user's
-    password.
-
-    The method should return a Twisted ``Deferred`` object, which resolves to
-    a ``str`` containing the user's (canonical) User ID if authentication was
-    successful, and ``None`` if not.
-
-    As with ``check_auth``, the ``Deferred`` may alternatively resolve to a
-    ``(user_id, callback)`` tuple.
-
 ``someprovider.check_password``\(*user_id*, *password*)
 
     This method provides a simpler interface than ``get_supported_login_types``

docs/postgres.rst

@@ -49,24 +49,6 @@ As with Debian/Ubuntu, postgres support depends on the postgres python connector
     export PATH=/usr/pgsql-9.4/bin/:$PATH
     pip install psycopg2
 
-Tuning Postgres
-===============
-
-The default settings should be fine for most deployments. For larger scale
-deployments tuning some of the settings is recommended, details of which can be
-found at https://wiki.postgresql.org/wiki/Tuning_Your_PostgreSQL_Server.
-
-In particular, we've found tuning the following values helpful for performance:
-
-- ``shared_buffers``
-- ``effective_cache_size``
-- ``work_mem``
-- ``maintenance_work_mem``
-- ``autovacuum_work_mem``
-
-Note that the appropriate values for those fields depend on the amount of free
-memory the database host has available.
-
 Synapse config
 ==============
 
@@ -147,8 +129,8 @@ Once that has completed, change the synapse config to point at the PostgreSQL
 database configuration file ``homeserver-postgres.yaml``::
 
     ./synctl stop
-    mv homeserver.yaml homeserver-old-sqlite.yaml
-    mv homeserver-postgres.yaml homeserver.yaml
+    mv homeserver.yaml homeserver-old-sqlite.yaml 
+    mv homeserver-postgres.yaml homeserver.yaml 
     ./synctl start
 
 Synapse should now be running against PostgreSQL.

docs/reverse_proxy.rst

@@ -1,106 +0,0 @@
-Using a reverse proxy with Synapse
-==================================
-
-It is recommended to put a reverse proxy such as
-`nginx <https://nginx.org/en/docs/http/ngx_http_proxy_module.html>`_,
-`Apache <https://httpd.apache.org/docs/current/mod/mod_proxy_http.html>`_,
-`Caddy <https://caddyserver.com/docs/proxy>`_ or
-`HAProxy <https://www.haproxy.org/>`_ in front of Synapse. One advantage of
-doing so is that it means that you can expose the default https port (443) to
-Matrix clients without needing to run Synapse with root privileges.
-
-**NOTE**: Your reverse proxy must not 'canonicalise' or 'normalise' the
-requested URI in any way (for example, by decoding ``%xx`` escapes). Beware
-that Apache *will* canonicalise URIs unless you specifify ``nocanon``.
-
-When setting up a reverse proxy, remember that Matrix clients and other Matrix
-servers do not necessarily need to connect to your server via the same server
-name or port. Indeed, clients will use port 443 by default, whereas servers
-default to port 8448. Where these are different, we refer to the 'client port'
-and the 'federation port'. See `Setting up federation
-<federate.md>`_ for more details of the algorithm used for
-federation connections.
-
-Let's assume that we expect clients to connect to our server at
-``https://matrix.example.com``, and other servers to connect at
-``https://example.com:8448``. Here are some example configurations:
-
-* nginx::
-
-      server {
-          listen 443 ssl;
-          listen [::]:443 ssl;
-          server_name matrix.example.com;
-
-          location /_matrix {
-              proxy_pass http://localhost:8008;
-              proxy_set_header X-Forwarded-For $remote_addr;
-          }
-      }
-
-      server {
-          listen 8448 ssl default_server;
-          listen [::]:8448 ssl default_server;
-          server_name example.com;
-
-          location / {
-              proxy_pass http://localhost:8008;
-              proxy_set_header X-Forwarded-For $remote_addr;
-          }
-      }
-
-* Caddy::
-
-      matrix.example.com {
-        proxy /_matrix http://localhost:8008 {
-          transparent
-        }
-      }
-
-      example.com:8448 {
-        proxy / http://localhost:8008 {
-          transparent
-        }
-      }
-
-* Apache (note the ``nocanon`` options here!)::
-
-      <VirtualHost *:443>
-          SSLEngine on
-          ServerName matrix.example.com;
-
-          ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
-          ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
-      </VirtualHost>
-
-      <VirtualHost *:8448>
-          SSLEngine on
-          ServerName example.com;
-          
-          ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
-          ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
-      </VirtualHost>
-
-* HAProxy::
-
-      frontend https
-        bind :::443 v4v6 ssl crt /etc/ssl/haproxy/ strict-sni alpn h2,http/1.1
-
-        # Matrix client traffic
-        acl matrix hdr(host) -i matrix.example.com
-        use_backend matrix if matrix
-
-      frontend matrix-federation
-        bind :::8448 v4v6 ssl crt /etc/ssl/haproxy/synapse.pem alpn h2,http/1.1
-        default_backend matrix
-
-      backend matrix
-        server matrix 127.0.0.1:8008
-
-You will also want to set ``bind_addresses: ['127.0.0.1']`` and ``x_forwarded: true``
-for port 8008 in ``homeserver.yaml`` to ensure that client IP addresses are
-recorded correctly.
-
-Having done so, you can then use ``https://matrix.example.com`` (instead of
-``https://matrix.example.com:8448``) as the "Custom server" when connecting to
-Synapse from a client.

docs/tcp_replication.rst

@@ -137,6 +137,7 @@ for each stream so that on reconneciton it can start streaming from the correct
 place. Note: not all RDATA have valid tokens due to batching. See
 ``RdataCommand`` for more details.
 
+
 Example
 ~~~~~~~
 
@@ -188,9 +189,7 @@ RDATA (S)
     A single update in a stream
 
 POSITION (S)
-    The position of the stream has been updated. Sent to the client after all
-    missing updates for a stream have been sent to the client and they're now
-    up to date.
+    The position of the stream has been updated
 
 ERROR (S, C)
     There was an error
@@ -222,28 +221,3 @@ SYNC (S, C)
 
 See ``synapse/replication/tcp/commands.py`` for a detailed description and the
 format of each command.
-
-
-Cache Invalidation Stream
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The cache invalidation stream is used to inform workers when they need to
-invalidate any of their caches in the data store. This is done by streaming all
-cache invalidations done on master down to the workers, assuming that any caches
-on the workers also exist on the master.
-
-Each individual cache invalidation results in a row being sent down replication,
-which includes the cache name (the name of the function) and they key to
-invalidate. For example::
-
-    > RDATA caches 550953771 ["get_user_by_id", ["@bob:example.com"], 1550574873251]
-
-However, there are times when a number of caches need to be invalidated at the
-same time with the same key. To reduce traffic we batch those invalidations into
-a single poke by defining a special cache name that workers understand to mean
-to expand to invalidate the correct caches.
-
-Currently the special cache names are declared in ``synapse/storage/_base.py``
-and are:
-
-1. ``cs_cache_fake`` ─ invalidates caches that depend on the current state

docs/workers.rst

@@ -26,8 +26,9 @@ Configuration
 To make effective use of the workers, you will need to configure an HTTP
 reverse-proxy such as nginx or haproxy, which will direct incoming requests to
 the correct worker, or to the main synapse instance. Note that this includes
-requests made to the federation port. See `<reverse_proxy.rst>`_ for
-information on setting up a reverse proxy.
+requests made to the federation port. The caveats regarding running a
+reverse-proxy on the federation port still apply (see
+https://github.com/matrix-org/synapse/blob/master/README.rst#reverse-proxying-the-federation-port).
 
 To enable workers, you need to add two replication listeners to the master
 synapse, e.g.::
@@ -182,7 +183,6 @@ endpoints matching the following regular expressions::
     ^/_matrix/federation/v1/event_auth/
     ^/_matrix/federation/v1/exchange_third_party_invite/
     ^/_matrix/federation/v1/send/
-    ^/_matrix/key/v2/query
 
 The above endpoints should all be routed to the federation_reader worker by the
 reverse-proxy configuration.
@@ -223,16 +223,6 @@ following regular expressions::
     ^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/context/.*$
     ^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/members$
     ^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/state$
-    ^/_matrix/client/(api/v1|r0|unstable)/login$
-    ^/_matrix/client/(api/v1|r0|unstable)/account/3pid$
-    ^/_matrix/client/(api/v1|r0|unstable)/keys/query$
-    ^/_matrix/client/(api/v1|r0|unstable)/keys/changes$
-
-Additionally, the following REST endpoints can be handled, but all requests must
-be routed to the same instance::
-
-    ^/_matrix/client/(r0|unstable)/register$
-
 
 ``synapse.app.user_dir``
 ~~~~~~~~~~~~~~~~~~~~~~~~

scripts-dev/build_debian_packages

@@ -1,154 +0,0 @@
-#!/usr/bin/env python3
-
-# Build the Debian packages using Docker images.
-#
-# This script builds the Docker images and then executes them sequentially, each
-# one building a Debian package for the targeted operating system. It is
-# designed to be a "single command" to produce all the images.
-#
-# By default, builds for all known distributions, but a list of distributions
-# can be passed on the commandline for debugging.
-
-import argparse
-import os
-import signal
-import subprocess
-import sys
-import threading
-from concurrent.futures import ThreadPoolExecutor
-
-DISTS = (
-    "debian:stretch",
-    "debian:buster",
-    "debian:sid",
-    "ubuntu:xenial",
-    "ubuntu:bionic",
-    "ubuntu:cosmic",
-)
-
-DESC = '''\
-Builds .debs for synapse, using a Docker image for the build environment.
-
-By default, builds for all known distributions, but a list of distributions
-can be passed on the commandline for debugging.
-'''
-
-
-class Builder(object):
-    def __init__(self, redirect_stdout=False):
-        self.redirect_stdout = redirect_stdout
-        self.active_containers = set()
-        self._lock = threading.Lock()
-        self._failed = False
-
-    def run_build(self, dist):
-        """Build deb for a single distribution"""
-
-        if self._failed:
-            print("not building %s due to earlier failure" % (dist, ))
-            raise Exception("failed")
-
-        try:
-            self._inner_build(dist)
-        except Exception as e:
-            print("build of %s failed: %s" % (dist, e), file=sys.stderr)
-            self._failed = True
-            raise
-
-    def _inner_build(self, dist):
-        projdir = os.path.dirname(os.path.dirname(os.path.realpath(__file__)))
-        os.chdir(projdir)
-
-        tag = dist.split(":", 1)[1]
-
-        # Make the dir where the debs will live.
-        #
-        # Note that we deliberately put this outside the source tree, otherwise
-        # we tend to get source packages which are full of debs. (We could hack
-        # around that with more magic in the build_debian.sh script, but that
-        # doesn't solve the problem for natively-run dpkg-buildpakage).
-        debsdir = os.path.join(projdir, '../debs')
-        os.makedirs(debsdir, exist_ok=True)
-
-        if self.redirect_stdout:
-            logfile = os.path.join(debsdir, "%s.buildlog" % (tag, ))
-            print("building %s: directing output to %s" % (dist, logfile))
-            stdout = open(logfile, "w")
-        else:
-            stdout = None
-
-        # first build a docker image for the build environment
-        subprocess.check_call([
-            "docker", "build",
-            "--tag", "dh-venv-builder:" + tag,
-            "--build-arg", "distro=" + dist,
-            "-f", "docker/Dockerfile-dhvirtualenv",
-            "docker",
-        ], stdout=stdout, stderr=subprocess.STDOUT)
-
-        container_name = "synapse_build_" + tag
-        with self._lock:
-            self.active_containers.add(container_name)
-
-        # then run the build itself
-        subprocess.check_call([
-            "docker", "run",
-            "--rm",
-            "--name", container_name,
-            "--volume=" + projdir + ":/synapse/source:ro",
-            "--volume=" + debsdir + ":/debs",
-            "-e", "TARGET_USERID=%i" % (os.getuid(), ),
-            "-e", "TARGET_GROUPID=%i" % (os.getgid(), ),
-            "dh-venv-builder:" + tag,
-        ], stdout=stdout, stderr=subprocess.STDOUT)
-
-        with self._lock:
-            self.active_containers.remove(container_name)
-
-        if stdout is not None:
-            stdout.close()
-            print("Completed build of %s" % (dist, ))
-
-    def kill_containers(self):
-        with self._lock:
-            active = list(self.active_containers)
-
-        for c in active:
-            print("killing container %s" % (c,))
-            subprocess.run([
-                "docker", "kill", c,
-            ], stdout=subprocess.DEVNULL)
-            with self._lock:
-                self.active_containers.remove(c)
-
-
-def run_builds(dists, jobs=1):
-    builder = Builder(redirect_stdout=(jobs > 1))
-
-    def sig(signum, _frame):
-        print("Caught SIGINT")
-        builder.kill_containers()
-    signal.signal(signal.SIGINT, sig)
-
-    with ThreadPoolExecutor(max_workers=jobs) as e:
-        res = e.map(builder.run_build, dists)
-
-    # make sure we consume the iterable so that exceptions are raised.
-    for r in res:
-        pass
-
-
-if __name__ == '__main__':
-    parser = argparse.ArgumentParser(
-        description=DESC,
-    )
-    parser.add_argument(
-        '-j', '--jobs', type=int, default=1,
-        help='specify the number of builds to run in parallel',
-    )
-    parser.add_argument(
-        'dist', nargs='*', default=DISTS,
-        help='a list of distributions to build for. Default: %(default)s',
-    )
-    args = parser.parse_args()
-    run_builds(dists=args.dist, jobs=args.jobs)

scripts-dev/check-newsfragment

@@ -1,39 +0,0 @@
-#!/bin/bash
-#
-# A script which checks that an appropriate news file has been added on this
-# branch.
-
-set -e
-
-# make sure that origin/develop is up to date
-git remote set-branches --add origin develop
-git fetch origin develop
-
-# if there are changes in the debian directory, check that the debian changelog
-# has been updated
-if ! git diff --quiet FETCH_HEAD... -- debian; then
-    if git diff --quiet FETCH_HEAD... -- debian/changelog; then
-        echo "Updates to debian directory, but no update to the changelog." >&2
-        exit 1
-    fi
-fi
-
-# if there are changes *outside* the debian directory, check that the
-# newsfragments have been updated.
-if git diff --name-only FETCH_HEAD... | grep -qv '^debian/'; then
-    tox -e check-newsfragment
-fi
-
-echo
-echo "--------------------------"
-echo
-
-# check that any new newsfiles on this branch end with a full stop.
-for f in `git diff --name-only FETCH_HEAD... -- changelog.d`; do
-    lastchar=`tr -d '\n' < $f | tail -c 1`
-    if [ $lastchar != '.' -a $lastchar != '!' ]; then
-        echo -e "\e[31mERROR: newsfragment $f does not end with a '.' or '!'\e[39m" >&2
-        exit 1
-    fi
-done
-

scripts-dev/convert_server_keys.py

@@ -76,7 +76,7 @@ def rows_v2(server, json):
 
 
 def main():
-    config = yaml.safe_load(open(sys.argv[1]))
+    config = yaml.load(open(sys.argv[1]))
     valid_until = int(time.time() / (3600 * 24)) * 1000 * 3600 * 24
 
     server_name = config["server_name"]

scripts-dev/generate_sample_config

@@ -1,18 +0,0 @@
-#!/bin/bash
-#
-# Update/check the docs/sample_config.yaml
-
-set -e
-
-cd `dirname $0`/..
-
-SAMPLE_CONFIG="docs/sample_config.yaml"
-
-if [ "$1" == "--check" ]; then
-    diff -u "$SAMPLE_CONFIG" <(./scripts/generate_config --header-file docs/.sample_config_header.yaml) >/dev/null || {
-        echo -e "\e[1m\e[31m$SAMPLE_CONFIG is not up-to-date. Regenerate it with \`scripts-dev/generate_sample_config\`.\e[0m" >&2
-        exit 1
-    }
-else
-    ./scripts/generate_config --header-file docs/.sample_config_header.yaml -o "$SAMPLE_CONFIG"
-fi

scripts/generate_config

@@ -1,7 +1,6 @@
 #!/usr/bin/env python
 
 import argparse
-import shutil
 import sys
 
 from synapse.config.homeserver import HomeServerConfig
@@ -51,13 +50,6 @@ if __name__ == "__main__":
         help="File to write the configuration to. Default: stdout",
     )
 
-    parser.add_argument(
-        "--header-file",
-        type=argparse.FileType('r'),
-        help="File from which to read a header, which will be printed before the "
-             "generated config.",
-    )
-
     args = parser.parse_args()
 
     report_stats = args.report_stats
@@ -72,7 +64,4 @@ if __name__ == "__main__":
         report_stats=report_stats,
     )
 
-    if args.header_file:
-        shutil.copyfileobj(args.header_file, args.output_file)
-
     args.output_file.write(conf)

scripts/synapse_port_db

@@ -53,7 +53,6 @@ BOOLEAN_COLUMNS = {
     "group_summary_users": ["is_public"],
     "group_roles": ["is_public"],
     "local_group_membership": ["is_publicised", "is_admin"],
-    "e2e_room_keys": ["is_verified"],
 }
 
 
@@ -811,7 +810,7 @@ class CursesProgress(Progress):
         middle_space = 1
 
         items = self.tables.items()
-        items = sorted(items, key=lambda i: (i[1]["perc"], i[0]))
+        items.sort(key=lambda i: (i[1]["perc"], i[0]))
 
         for i, (table, data) in enumerate(items):
             if i + 2 >= rows:

synapse/__init__.py

@@ -1,6 +1,6 @@
 # -*- coding: utf-8 -*-
 # Copyright 2014-2016 OpenMarket Ltd
-# Copyright 2018-9 New Vector Ltd
+# Copyright 2018 New Vector Ltd
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -27,4 +27,4 @@ try:
 except ImportError:
     pass
 
-__version__ = "0.99.3"
+__version__ = "0.34.1.1"

synapse/_scripts/register_new_matrix_user.py

@@ -46,7 +46,7 @@ def request_registration(
     # Get the nonce
     r = requests.get(url, verify=False)
 
-    if r.status_code != 200:
+    if r.status_code is not 200:
         _print("ERROR! Received %d %s" % (r.status_code, r.reason))
         if 400 <= r.status_code < 500:
             try:
@@ -84,7 +84,7 @@ def request_registration(
     _print("Sending registration request...")
     r = requests.post(url, json=data, verify=False)
 
-    if r.status_code != 200:
+    if r.status_code is not 200:
         _print("ERROR! Received %d %s" % (r.status_code, r.reason))
         if 400 <= r.status_code < 500:
             try:

synapse/api/auth.py

@@ -65,7 +65,7 @@ class Auth(object):
         register_cache("cache", "token_cache", self.token_cache)
 
     @defer.inlineCallbacks
-    def check_from_context(self, room_version, event, context, do_sig_check=True):
+    def check_from_context(self, event, context, do_sig_check=True):
         prev_state_ids = yield context.get_prev_state_ids(self.store)
         auth_events_ids = yield self.compute_auth_events(
             event, prev_state_ids, for_verification=True,
@@ -74,16 +74,12 @@ class Auth(object):
         auth_events = {
             (e.type, e.state_key): e for e in itervalues(auth_events)
         }
-        self.check(
-            room_version, event,
-            auth_events=auth_events, do_sig_check=do_sig_check,
-        )
+        self.check(event, auth_events=auth_events, do_sig_check=do_sig_check)
 
-    def check(self, room_version, event, auth_events, do_sig_check=True):
+    def check(self, event, auth_events, do_sig_check=True):
         """ Checks if this event is correctly authed.
 
         Args:
-            room_version (str): version of the room
             event: the event being checked.
             auth_events (dict: event-key -> event): the existing room state.
 
@@ -92,9 +88,7 @@ class Auth(object):
             True if the auth checks pass.
         """
         with Measure(self.clock, "auth.check"):
-            event_auth.check(
-                room_version, event, auth_events, do_sig_check=do_sig_check
-            )
+            event_auth.check(event, auth_events, do_sig_check=do_sig_check)
 
     @defer.inlineCallbacks
     def check_joined_room(self, room_id, user_id, current_state=None):
@@ -550,6 +544,17 @@ class Auth(object):
         """
         return self.store.is_server_admin(user)
 
+    @defer.inlineCallbacks
+    def add_auth_events(self, builder, context):
+        prev_state_ids = yield context.get_prev_state_ids(self.store)
+        auth_ids = yield self.compute_auth_events(builder, prev_state_ids)
+
+        auth_events_entries = yield self.store.add_event_hashes(
+            auth_ids
+        )
+
+        builder.auth_events = auth_events_entries
+
     @defer.inlineCallbacks
     def compute_auth_events(self, event, current_state_ids, for_verification=False):
         if event.type == EventTypes.Create:
@@ -566,7 +571,7 @@ class Auth(object):
         key = (EventTypes.JoinRules, "", )
         join_rule_event_id = current_state_ids.get(key)
 
-        key = (EventTypes.Member, event.sender, )
+        key = (EventTypes.Member, event.user_id, )
         member_event_id = current_state_ids.get(key)
 
         key = (EventTypes.Create, "", )
@@ -616,20 +621,20 @@ class Auth(object):
 
         defer.returnValue(auth_ids)
 
-    def check_redaction(self, room_version, event, auth_events):
+    def check_redaction(self, event, auth_events):
         """Check whether the event sender is allowed to redact the target event.
 
         Returns:
             True if the the sender is allowed to redact the target event if the
-                target event was created by them.
+            target event was created by them.
             False if the sender is allowed to redact the target event with no
-                further checks.
+            further checks.
 
         Raises:
             AuthError if the event sender is definitely not allowed to redact
-                the target event.
+            the target event.
         """
-        return event_auth.check_redaction(room_version, event, auth_events)
+        return event_auth.check_redaction(event, auth_events)
 
     @defer.inlineCallbacks
     def check_can_change_room_list(self, room_id, user):
@@ -743,9 +748,9 @@ class Auth(object):
 
         Returns:
             Deferred[tuple[str, str|None]]: Resolves to the current membership of
-                the user in the room and the membership event ID of the user. If
-                the user is not in the room and never has been, then
-                `(Membership.JOIN, None)` is returned.
+            the user in the room and the membership event ID of the user. If
+            the user is not in the room and never has been, then
+            `(Membership.JOIN, None)` is returned.
         """
 
         try:
@@ -777,22 +782,20 @@ class Auth(object):
 
         Args:
             user_id(str|None): If present, checks for presence against existing
-                MAU cohort
+            MAU cohort
 
             threepid(dict|None): If present, checks for presence against configured
-                reserved threepid. Used in cases where the user is trying register
-                with a MAU blocked server, normally they would be rejected but their
-                threepid is on the reserved list. user_id and
-                threepid should never be set at the same time.
+            reserved threepid. Used in cases where the user is trying register
+            with a MAU blocked server, normally they would be rejected but their
+            threepid is on the reserved list. user_id and
+            threepid should never be set at the same time.
         """
 
         # Never fail an auth check for the server notices users or support user
         # This can be a problem where event creation is prohibited due to blocking
-        if user_id is not None:
-            if user_id == self.hs.config.server_notices_mxid:
-                return
-            if (yield self.store.is_support_user(user_id)):
-                return
+        is_support = yield self.store.is_support_user(user_id)
+        if user_id == self.hs.config.server_notices_mxid or is_support:
+            return
 
         if self.hs.config.hs_disabled:
             raise ResourceLimitError(
@@ -816,9 +819,7 @@ class Auth(object):
             elif threepid:
                 # If the user does not exist yet, but is signing up with a
                 # reserved threepid then pass auth check
-                if is_threepid_reserved(
-                    self.hs.config.mau_limits_reserved_threepids, threepid
-                ):
+                if is_threepid_reserved(self.hs.config, threepid):
                     return
             # Else if there is no room in the MAU bucket, bail
             current_mau = yield self.store.get_monthly_active_count()

synapse/api/constants.py

@@ -68,13 +68,10 @@ class EventTypes(object):
     Aliases = "m.room.aliases"
     Redaction = "m.room.redaction"
     ThirdPartyInvite = "m.room.third_party_invite"
-    Encryption = "m.room.encryption"
-    RelatedGroups = "m.room.related_groups"
 
     RoomHistoryVisibility = "m.room.history_visibility"
     CanonicalAlias = "m.room.canonical_alias"
     RoomAvatar = "m.room.avatar"
-    RoomEncryption = "m.room.encryption"
     GuestAccess = "m.room.guest_access"
 
     # These are used for validation
@@ -103,6 +100,25 @@ class ThirdPartyEntityKind(object):
     LOCATION = "location"
 
 
+class RoomVersions(object):
+    V1 = "1"
+    V2 = "2"
+    VDH_TEST = "vdh-test-version"
+    STATE_V2_TEST = "state-v2-test"
+
+
+# the version we will give rooms which are created on this server
+DEFAULT_ROOM_VERSION = RoomVersions.V1
+
+# vdh-test-version is a placeholder to get room versioning support working and tested
+# until we have a working v2.
+KNOWN_ROOM_VERSIONS = {
+    RoomVersions.V1,
+    RoomVersions.V2,
+    RoomVersions.VDH_TEST,
+    RoomVersions.STATE_V2_TEST,
+}
+
 ServerNoticeMsgType = "m.server_notice"
 ServerNoticeLimitReached = "m.server_notice.usage_limit_reached"
 
@@ -112,4 +128,4 @@ class UserTypes(object):
     'admin' and 'guest' users should also be UserTypes. Normal users are type None
     """
     SUPPORT = "support"
-    ALL_USER_TYPES = (SUPPORT,)
+    ALL_USER_TYPES = (SUPPORT)

synapse/api/filtering.py

@@ -444,20 +444,6 @@ class Filter(object):
     def include_redundant_members(self):
         return self.filter_json.get("include_redundant_members", False)
 
-    def with_room_ids(self, room_ids):
-        """Returns a new filter with the given room IDs appended.
-
-        Args:
-            room_ids (iterable[unicode]): The room_ids to add
-
-        Returns:
-            filter: A new filter including the given rooms and the old
-                    filter's rooms.
-        """
-        newFilter = Filter(self.filter_json)
-        newFilter.rooms += room_ids
-        return newFilter
-
 
 def _matches_wildcard(actual_value, filter_value):
     if filter_value.endswith("*"):