ree

.buildkite/scripts/test_old_deps.sh

@@ -6,7 +6,7 @@
 set -ex
 
 apt-get update
-apt-get install -y python3.5 python3.5-dev python3-pip libxml2-dev libxslt-dev xmlsec1 zlib1g-dev tox
+apt-get install -y python3.5 python3.5-dev python3-pip libxml2-dev libxslt-dev zlib1g-dev tox
 
 export LANG="C.UTF-8"
 

.buildkite/worker-blacklist

@@ -1,10 +1,41 @@
 # This file serves as a blacklist for SyTest tests that we expect will fail in
 # Synapse when run under worker mode. For more details, see sytest-blacklist.
 
+Message history can be paginated
+
 Can re-join room if re-invited
 
+The only membership state included in an initial sync is for all the senders in the timeline
+
+Local device key changes get to remote servers
+
+If remote user leaves room we no longer receive device updates
+
+Forgotten room messages cannot be paginated
+
+Inbound federation can get public room list
+
+Members from the gap are included in gappy incr LL sync
+
+Leaves are present in non-gapped incremental syncs
+
+Old leaves are present in gapped incremental syncs
+
+User sees updates to presence from other users in the incremental sync.
+
+Gapped incremental syncs include all state changes
+
+Old members are included in gappy incr LL sync if they start speaking
+
 # new failures as of https://github.com/matrix-org/sytest/pull/732
 Device list doesn't change if remote server is down
+Remote servers cannot set power levels in rooms without existing powerlevels
+Remote servers should reject attempts by non-creators to set the power levels
 
 # https://buildkite.com/matrix-dot-org/synapse/builds/6134#6f67bf47-e234-474d-80e8-c6e1868b15c5
 Server correctly handles incoming m.device_list_update
+
+# this fails reliably with a torture level of 100 due to https://github.com/matrix-org/synapse/issues/6536
+Outbound federation requests missing prev_events and then asks for /state_ids and resolves the state
+
+Can get rooms/{roomId}/members at a given point

.circleci/config.yml

@@ -1,35 +1,24 @@
-version: 2.1
+version: 2
 jobs:
   dockerhubuploadrelease:
-    docker:
-      - image: docker:git
+    machine: true
     steps:
       - checkout
-      - docker_prepare
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:${CIRCLE_TAG} -t matrixdotorg/synapse:${CIRCLE_TAG}-py3 .
       - run: docker login --username $DOCKER_HUB_USERNAME --password $DOCKER_HUB_PASSWORD
-      # for release builds, we want to get the amd64 image out asap, so first
-      # we do an amd64-only build, before following up with a multiarch build.
-      - docker_build:
-          tag: -t matrixdotorg/synapse:${CIRCLE_TAG}
-          platforms: linux/amd64
-      - docker_build:
-          tag: -t matrixdotorg/synapse:${CIRCLE_TAG}
-          platforms: linux/amd64,linux/arm/v7,linux/arm64
-
+      - run: docker push matrixdotorg/synapse:${CIRCLE_TAG}
+      - run: docker push matrixdotorg/synapse:${CIRCLE_TAG}-py3
   dockerhubuploadlatest:
-    docker:
-      - image: docker:git
+    machine: true
     steps:
       - checkout
-      - docker_prepare
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:latest -t matrixdotorg/synapse:latest-py3 .
       - run: docker login --username $DOCKER_HUB_USERNAME --password $DOCKER_HUB_PASSWORD
-      # for `latest`, we don't want the arm images to disappear, so don't update the tag
-      # until all of the platforms are built.
-      - docker_build:
-          tag: -t matrixdotorg/synapse:latest
-          platforms: linux/amd64,linux/arm/v7,linux/arm64
+      - run: docker push matrixdotorg/synapse:latest
+      - run: docker push matrixdotorg/synapse:latest-py3
 
 workflows:
+  version: 2
   build:
     jobs:
       - dockerhubuploadrelease:
@@ -42,37 +31,3 @@ workflows:
           filters:
             branches:
               only: master
-
-commands:
-  docker_prepare:
-    description: Sets up a remote docker server, downloads the buildx cli plugin, and enables multiarch images
-    parameters:
-      buildx_version:
-        type: string
-        default: "v0.4.1"
-    steps:
-      - setup_remote_docker:
-          # 19.03.13 was the most recent available on circleci at the time of
-          # writing.
-          version: 19.03.13
-      - run: apk add --no-cache curl
-      - run: mkdir -vp ~/.docker/cli-plugins/ ~/dockercache
-      - run: curl --silent -L "https://github.com/docker/buildx/releases/download/<< parameters.buildx_version >>/buildx-<< parameters.buildx_version >>.linux-amd64" > ~/.docker/cli-plugins/docker-buildx
-      - run: chmod a+x ~/.docker/cli-plugins/docker-buildx
-      # install qemu links in /proc/sys/fs/binfmt_misc on the docker instance running the circleci job
-      - run: docker run --rm --privileged multiarch/qemu-user-static --reset -p yes
-      # create a context named `builder` for the builds
-      - run: docker context create builder
-      # create a buildx builder using the new context, and set it as the default
-      - run: docker buildx create builder --use
-
-  docker_build:
-    description: Builds and pushed images to dockerhub using buildx
-    parameters:
-      platforms:
-        type: string
-        default: linux/amd64
-      tag:
-        type: string
-    steps:
-      - run: docker buildx build -f docker/Dockerfile --push --platform << parameters.platforms >> --label gitsha1=${CIRCLE_SHA1} << parameters.tag >> --progress=plain .

.github/ISSUE_TEMPLATE.md

@@ -1,5 +0,0 @@
-**If you are looking for support** please ask in **#synapse:matrix.org**
-(using a matrix.org account if necessary). We do not use GitHub issues for
-support.
-
-**If you want to report a security issue** please see https://matrix.org/security-disclosure-policy/

.github/ISSUE_TEMPLATE/BUG_REPORT.md

@@ -6,11 +6,9 @@ about: Create a report to help us improve
 
 <!--
 
-**THIS IS NOT A SUPPORT CHANNEL!**
-**IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**,
-please ask in **#synapse:matrix.org** (using a matrix.org account if necessary)
+**IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**:
+You will likely get better support more quickly if you ask in ** #synapse:matrix.org ** ;)
 
-If you want to report a security issue, please see https://matrix.org/security-disclosure-policy/
 
 This is a bug report template. By following the instructions below and
 filling out the sections with your information, you will help the us to get all

.gitignore

@@ -21,7 +21,6 @@ _trial_temp*/
 /.python-version
 /*.signing.key
 /env/
-/.venv*/
 /homeserver*.yaml
 /logs
 /media_store/

CONTRIBUTING.md

@@ -1,72 +1,80 @@
-# Contributing code to Synapse
+# Contributing code to Matrix
 
-Everyone is welcome to contribute code to [matrix.org
-projects](https://github.com/matrix-org), provided that they are willing to
-license their contributions under the same license as the project itself. We
-follow a simple 'inbound=outbound' model for contributions: the act of
-submitting an 'inbound' contribution means that the contributor agrees to
-license the code under the same terms as the project's overall 'outbound'
-license - in our case, this is almost always Apache Software License v2 (see
-[LICENSE](LICENSE)).
+Everyone is welcome to contribute code to Matrix
+(https://github.com/matrix-org), provided that they are willing to license
+their contributions under the same license as the project itself. We follow a
+simple 'inbound=outbound' model for contributions: the act of submitting an
+'inbound' contribution means that the contributor agrees to license the code
+under the same terms as the project's overall 'outbound' license - in our
+case, this is almost always Apache Software License v2 (see [LICENSE](LICENSE)).
 
 ## How to contribute
 
-The preferred and easiest way to contribute changes is to fork the relevant
-project on github, and then [create a pull request](
-https://help.github.com/articles/using-pull-requests/) to ask us to pull your
-changes into our repo.
+The preferred and easiest way to contribute changes to Matrix is to fork the
+relevant project on github, and then [create a pull request](
+https://help.github.com/articles/using-pull-requests/) to ask us to pull
+your changes into our repo.
 
-Some other points to follow:
+**The single biggest thing you need to know is: please base your changes on
+the develop branch - *not* master.**
 
- * Please base your changes on the `develop` branch.
+We use the master branch to track the most recent release, so that folks who
+blindly clone the repo and automatically check out master get something that
+works. Develop is the unstable branch where all the development actually
+happens: the workflow is that contributors should fork the develop branch to
+make a 'feature' branch for a particular contribution, and then make a pull
+request to merge this back into the matrix.org 'official' develop branch. We
+use github's pull request workflow to review the contribution, and either ask
+you to make any refinements needed or merge it and make them ourselves. The
+changes will then land on master when we next do a release.
 
- * Please follow the [code style requirements](#code-style).
+We use [Buildkite](https://buildkite.com/matrix-dot-org/synapse) for continuous
+integration. If your change breaks the build, this will be shown in GitHub, so
+please keep an eye on the pull request for feedback.
 
- * Please include a [changelog entry](#changelog) with each PR.
+To run unit tests in a local development environment, you can use:
 
- * Please [sign off](#sign-off) your contribution.
+- ``tox -e py35`` (requires tox to be installed by ``pip install tox``)
+  for SQLite-backed Synapse on Python 3.5.
+- ``tox -e py36`` for SQLite-backed Synapse on Python 3.6.
+- ``tox -e py36-postgres`` for PostgreSQL-backed Synapse on Python 3.6
+  (requires a running local PostgreSQL with access to create databases).
+- ``./test_postgresql.sh`` for PostgreSQL-backed Synapse on Python 3.5
+  (requires Docker). Entirely self-contained, recommended if you don't want to
+  set up PostgreSQL yourself.
 
- * Please keep an eye on the pull request for feedback from the [continuous
-   integration system](#continuous-integration-and-testing) and try to fix any
-   errors that come up.
-
- * If you need to [update your PR](#updating-your-pull-request), just add new
-   commits to your branch rather than rebasing.
+Docker images are available for running the integration tests (SyTest) locally,
+see the [documentation in the SyTest repo](
+https://github.com/matrix-org/sytest/blob/develop/docker/README.md) for more
+information.
 
 ## Code style
 
-Synapse's code style is documented [here](docs/code_style.md). Please follow
-it, including the conventions for the [sample configuration
-file](docs/code_style.md#configuration-file-format).
+All Matrix projects have a well-defined code-style - and sometimes we've even
+got as far as documenting it... For instance, synapse's code style doc lives
+[here](docs/code_style.md).
 
-Many of the conventions are enforced by scripts which are run as part of the
-[continuous integration system](#continuous-integration-and-testing). To help
-check if you have followed the code style, you can run `scripts-dev/lint.sh`
-locally. You'll need python 3.6 or later, and to install a number of tools:
+To facilitate meeting these criteria you can run `scripts-dev/lint.sh`
+locally. Since this runs the tools listed in the above document, you'll need
+python 3.6 and to install each tool:
 
 ```
 # Install the dependencies
-pip install -e ".[lint,mypy]"
+pip install -U black flake8 flake8-comprehensions isort
 
 # Run the linter script
 ./scripts-dev/lint.sh
 ```
 
 **Note that the script does not just test/check, but also reformats code, so you
-may wish to ensure any new code is committed first**.
-
-By default, this script checks all files and can take some time; if you alter
-only certain files, you might wish to specify paths as arguments to reduce the
-run-time:
+may wish to ensure any new code is committed first**. By default this script
+checks all files and can take some time; if you alter only certain files, you
+might wish to specify paths as arguments to reduce the run-time:
 
 ```
 ./scripts-dev/lint.sh path/to/file1.py path/to/file2.py path/to/folder
 ```
 
-You can also provide the `-d` option, which will lint the files that have been
-changed since the last git commit. This will often be significantly faster than
-linting the whole codebase.
-
 Before pushing new changes, ensure they don't produce linting errors. Commit any
 files that were corrected.
 
@@ -74,6 +82,7 @@ Please ensure your changes match the cosmetic style of the existing project,
 and **never** mix cosmetic and functional changes in the same commit, as it
 makes it horribly hard to review otherwise.
 
+
 ## Changelog
 
 All changes, even minor ones, need a corresponding changelog / newsfragment
@@ -89,55 +98,24 @@ in the format of `PRnumber.type`. The type can be one of the following:
 * `removal` (also used for deprecations)
 * `misc` (for internal-only changes)
 
-This file will become part of our [changelog](
-https://github.com/matrix-org/synapse/blob/master/CHANGES.md) at the next
-release, so the content of the file should be a short description of your
-change in the same style as the rest of the changelog. The file can contain Markdown
-formatting, and should end with a full stop (.) or an exclamation mark (!) for
-consistency.
+The content of the file is your changelog entry, which should be a short
+description of your change in the same style as the rest of our [changelog](
+https://github.com/matrix-org/synapse/blob/master/CHANGES.md). The file can
+contain Markdown formatting, and should end with a full stop (.) or an
+exclamation mark (!) for consistency.
 
 Adding credits to the changelog is encouraged, we value your
 contributions and would like to have you shouted out in the release notes!
 
 For example, a fix in PR #1234 would have its changelog entry in
-`changelog.d/1234.bugfix`, and contain content like:
+`changelog.d/1234.bugfix`, and contain content like "The security levels of
+Florbs are now validated when received over federation. Contributed by Jane
+Matrix.".
 
-> The security levels of Florbs are now validated when received
-> via the `/federation/florb` endpoint. Contributed by Jane Matrix.
-
-If there are multiple pull requests involved in a single bugfix/feature/etc,
-then the content for each `changelog.d` file should be the same. Towncrier will
-merge the matching files together into a single changelog entry when we come to
-release.
-
-### How do I know what to call the changelog file before I create the PR?
-
-Obviously, you don't know if you should call your newsfile
-`1234.bugfix` or `5678.bugfix` until you create the PR, which leads to a
-chicken-and-egg problem.
-
-There are two options for solving this:
-
- 1. Open the PR without a changelog file, see what number you got, and *then*
-    add the changelog file to your branch (see [Updating your pull
-    request](#updating-your-pull-request)), or:
-
- 1. Look at the [list of all
-    issues/PRs](https://github.com/matrix-org/synapse/issues?q=), add one to the
-    highest number you see, and quickly open the PR before somebody else claims
-    your number.
-
-    [This
-    script](https://github.com/richvdh/scripts/blob/master/next_github_number.sh)
-    might be helpful if you find yourself doing this a lot.
-
-Sorry, we know it's a bit fiddly, but it's *really* helpful for us when we come
-to put together a release!
-
-### Debian changelog
+## Debian changelog
 
 Changes which affect the debian packaging files (in `debian`) are an
-exception to the rule that all changes require a `changelog.d` file.
+exception.
 
 In this case, you will need to add an entry to the debian changelog for the
 next release. For this, run the following command:
@@ -156,24 +134,6 @@ directory, you will need both a regular newsfragment *and* an entry in the
 debian changelog. (Though typically such changes should be submitted as two
 separate pull requests.)
 
-## Documentation
-
-There is a growing amount of documentation located in the [docs](docs)
-directory. This documentation is intended primarily for sysadmins running their
-own Synapse instance, as well as developers interacting externally with
-Synapse. [docs/dev](docs/dev) exists primarily to house documentation for
-Synapse developers. [docs/admin_api](docs/admin_api) houses documentation
-regarding Synapse's Admin API, which is used mostly by sysadmins and external
-service developers.
-
-New files added to both folders should be written in [Github-Flavoured
-Markdown](https://guides.github.com/features/mastering-markdown/), and attempts
-should be made to migrate existing documents to markdown where possible.
-
-Some documentation also exists in [Synapse's Github
-Wiki](https://github.com/matrix-org/synapse/wiki), although this is primarily
-contributed to by community authors.
-
 ## Sign off
 
 In order to have a concrete record that your contribution is intentional
@@ -240,45 +200,19 @@ Git allows you to add this signoff automatically when using the `-s`
 flag to `git commit`, which uses the name and email set in your
 `user.name` and `user.email` git configs.
 
-## Continuous integration and testing
+## Merge Strategy
 
-[Buildkite](https://buildkite.com/matrix-dot-org/synapse) will automatically
-run a series of checks and tests against any PR which is opened against the
-project; if your change breaks the build, this will be shown in GitHub, with
-links to the build results. If your build fails, please try to fix the errors
-and update your branch.
+We use the commit history of develop/master extensively to identify
+when regressions were introduced and what changes have been made.
 
-To run unit tests in a local development environment, you can use:
+We aim to have a clean merge history, which means we normally squash-merge
+changes into develop. For small changes this means there is no need to rebase
+to clean up your PR before merging. Larger changes with an organised set of
+commits may be merged as-is, if the history is judged to be useful.
 
-- ``tox -e py35`` (requires tox to be installed by ``pip install tox``)
-  for SQLite-backed Synapse on Python 3.5.
-- ``tox -e py36`` for SQLite-backed Synapse on Python 3.6.
-- ``tox -e py36-postgres`` for PostgreSQL-backed Synapse on Python 3.6
-  (requires a running local PostgreSQL with access to create databases).
-- ``./test_postgresql.sh`` for PostgreSQL-backed Synapse on Python 3.5
-  (requires Docker). Entirely self-contained, recommended if you don't want to
-  set up PostgreSQL yourself.
-
-Docker images are available for running the integration tests (SyTest) locally,
-see the [documentation in the SyTest repo](
-https://github.com/matrix-org/sytest/blob/develop/docker/README.md) for more
-information.
-
-## Updating your pull request
-
-If you decide to make changes to your pull request - perhaps to address issues
-raised in a review, or to fix problems highlighted by [continuous
-integration](#continuous-integration-and-testing) - just add new commits to your
-branch, and push to GitHub. The pull request will automatically be updated.
-
-Please **avoid** rebasing your branch, especially once the PR has been
-reviewed: doing so makes it very difficult for a reviewer to see what has
-changed since a previous review.
-
-## Notes for maintainers on merging PRs etc
-
-There are some notes for those with commit access to the project on how we
-manage git [here](docs/dev/git.md).
+This use of squash-merging will mean PRs built on each other will be hard to 
+merge. We suggest avoiding these where possible, and if required, ensuring
+each PR has a tidy set of commits to ease merging.
 
 ## Conclusion
 

INSTALL.md

@@ -1,12 +1,10 @@
 - [Choosing your server name](#choosing-your-server-name)
-- [Picking a database engine](#picking-a-database-engine)
 - [Installing Synapse](#installing-synapse)
   - [Installing from source](#installing-from-source)
     - [Platform-Specific Instructions](#platform-specific-instructions)
   - [Prebuilt packages](#prebuilt-packages)
 - [Setting up Synapse](#setting-up-synapse)
   - [TLS certificates](#tls-certificates)
-  - [Client Well-Known URI](#client-well-known-uri)
   - [Email](#email)
   - [Registering a user](#registering-a-user)
   - [Setting up a TURN server](#setting-up-a-turn-server)
@@ -29,25 +27,6 @@ that your email address is probably `user@example.com` rather than
 `user@email.example.com`) - but doing so may require more advanced setup: see
 [Setting up Federation](docs/federate.md).
 
-# Picking a database engine
-
-Synapse offers two database engines:
- * [PostgreSQL](https://www.postgresql.org)
- * [SQLite](https://sqlite.org/)
-
-Almost all installations should opt to use PostgreSQL. Advantages include:
-
-* significant performance improvements due to the superior threading and
-  caching model, smarter query optimiser
-* allowing the DB to be run on separate hardware
-
-For information on how to install and use PostgreSQL, please see
-[docs/postgres.md](docs/postgres.md)
-
-By default Synapse uses SQLite and in doing so trades performance for convenience.
-SQLite is only recommended in Synapse for testing purposes or for servers with
-light workloads.
-
 # Installing Synapse
 
 ## Installing from source
@@ -57,7 +36,7 @@ light workloads.
 System requirements:
 
 - POSIX-compliant system (tested on Linux & OS X)
-- Python 3.5.2 or later, up to Python 3.9.
+- Python 3.5.2 or later, up to Python 3.8.
 - At least 1GB of free RAM if you want to join large public rooms like #matrix:matrix.org
 
 Synapse is written in Python but some of the libraries it uses are written in
@@ -201,41 +180,35 @@ sudo zypper in python-pip python-setuptools sqlite3 python-virtualenv \
 
 #### OpenBSD
 
-A port of Synapse is available under `net/synapse`. The filesystem
-underlying the homeserver directory (defaults to `/var/synapse`) has to be
-mounted with `wxallowed` (cf. `mount(8)`), so creating a separate filesystem
-and mounting it to `/var/synapse` should be taken into consideration.
-
-To be able to build Synapse's dependency on python the `WRKOBJDIR`
-(cf. `bsd.port.mk(5)`) for building python, too, needs to be on a filesystem
-mounted with `wxallowed` (cf. `mount(8)`).
-
-Creating a `WRKOBJDIR` for building python under `/usr/local` (which on a
-default OpenBSD installation is mounted with `wxallowed`):
+Installing prerequisites on OpenBSD:
 
 ```
-doas mkdir /usr/local/pobj_wxallowed
+doas pkg_add python libffi py-pip py-setuptools sqlite3 py-virtualenv \
+              libxslt jpeg
 ```
 
-Assuming `PORTS_PRIVSEP=Yes` (cf. `bsd.port.mk(5)`) and `SUDO=doas` are
-configured in `/etc/mk.conf`:
+There is currently no port for OpenBSD. Additionally, OpenBSD's security
+settings require a slightly more difficult installation process.
 
-```
-doas chown _pbuild:_pbuild /usr/local/pobj_wxallowed
-```
+(XXX: I suspect this is out of date)
 
-Setting the `WRKOBJDIR` for building python:
+1. Create a new directory in `/usr/local` called `_synapse`. Also, create a
+   new user called `_synapse` and set that directory as the new user's home.
+   This is required because, by default, OpenBSD only allows binaries which need
+   write and execute permissions on the same memory space to be run from
+   `/usr/local`.
+2. `su` to the new `_synapse` user and change to their home directory.
+3. Create a new virtualenv: `virtualenv -p python3 ~/.synapse`
+4. Source the virtualenv configuration located at
+   `/usr/local/_synapse/.synapse/bin/activate`. This is done in `ksh` by
+   using the `.` command, rather than `bash`'s `source`.
+5. Optionally, use `pip` to install `lxml`, which Synapse needs to parse
+   webpages for their titles.
+6. Use `pip` to install this repository: `pip install matrix-synapse`
+7. Optionally, change `_synapse`'s shell to `/bin/false` to reduce the
+   chance of a compromised Synapse server being used to take over your box.
 
-```
-echo WRKOBJDIR_lang/python/3.7=/usr/local/pobj_wxallowed  \\nWRKOBJDIR_lang/python/2.7=/usr/local/pobj_wxallowed >> /etc/mk.conf
-```
-
-Building Synapse:
-
-```
-cd /usr/ports/net/synapse
-make install
-```
+After this, you may proceed with the rest of the install directions.
 
 #### Windows
 
@@ -255,9 +228,9 @@ for a number of platforms.
 
 There is an offical synapse image available at
 https://hub.docker.com/r/matrixdotorg/synapse which can be used with
-the docker-compose file available at [contrib/docker](contrib/docker). Further
-information on this including configuration options is available in the README
-on hub.docker.com.
+the docker-compose file available at [contrib/docker](contrib/docker). Further information on
+this including configuration options is available in the README on
+hub.docker.com.
 
 Alternatively, Andreas Peters (previously Silvio Fricke) has contributed a
 Dockerfile to automate a synapse server in a single Docker image, at
@@ -265,8 +238,7 @@ https://hub.docker.com/r/avhost/docker-matrix/tags/
 
 Slavi Pantaleev has created an Ansible playbook,
 which installs the offical Docker image of Matrix Synapse
-along with many other Matrix-related services (Postgres database, Element, coturn,
-ma1sd, SSL support, etc.).
+along with many other Matrix-related services (Postgres database, riot-web, coturn, mxisd, SSL support, etc.).
 For more details, see
 https://github.com/spantaleev/matrix-docker-ansible-deploy
 
@@ -299,27 +271,22 @@ The fingerprint of the repository signing key (as shown by `gpg
 /usr/share/keyrings/matrix-org-archive-keyring.gpg`) is
 `AAF9AE843A7584B5A3E4CD2BCF45A512DE2DA058`.
 
-#### Downstream Debian packages
+#### Downstream Debian/Ubuntu packages
 
-We do not recommend using the packages from the default Debian `buster`
-repository at this time, as they are old and suffer from known security
-vulnerabilities. You can install the latest version of Synapse from
-[our repository](#matrixorg-packages) or from `buster-backports`. Please
-see the [Debian documentation](https://backports.debian.org/Instructions/)
-for information on how to use backports.
-
-If you are using Debian `sid` or testing, Synapse is available in the default
-repositories and it should be possible to install it simply with:
+For `buster` and `sid`, Synapse is available in the Debian repositories and
+it should be possible to install it with simply:
 
 ```
 sudo apt install matrix-synapse
 ```
 
-#### Downstream Ubuntu packages
+There is also a version of `matrix-synapse` in `stretch-backports`. Please see
+the [Debian documentation on
+backports](https://backports.debian.org/Instructions/) for information on how
+to use them.
 
-We do not recommend using the packages in the default Ubuntu repository
-at this time, as they are old and suffer from known security vulnerabilities.
-The latest version of Synapse can be installed from [our repository](#matrixorg-packages).
+We do not recommend using the packages in downstream Ubuntu at this time, as
+they are old and suffer from known security vulnerabilities.
 
 ### Fedora
 
@@ -383,18 +350,6 @@ Synapse can be installed via FreeBSD Ports or Packages contributed by Brendan Mo
  - Ports: `cd /usr/ports/net-im/py-matrix-synapse && make install clean`
  - Packages: `pkg install py37-matrix-synapse`
 
-### OpenBSD
-
-As of OpenBSD 6.7 Synapse is available as a pre-compiled binary. The filesystem
-underlying the homeserver directory (defaults to `/var/synapse`) has to be
-mounted with `wxallowed` (cf. `mount(8)`), so creating a separate filesystem
-and mounting it to `/var/synapse` should be taken into consideration.
-
-Installing Synapse:
-
-```
-doas pkg_add synapse
-```
 
 ### NixOS
 
@@ -432,11 +387,13 @@ so, you will need to edit `homeserver.yaml`, as follows:
   ```
 
 * You will also need to uncomment the `tls_certificate_path` and
-  `tls_private_key_path` lines under the `TLS` section. You will need to manage
-  provisioning of these certificates yourself — Synapse had built-in ACME
-  support, but the ACMEv1 protocol Synapse implements is deprecated, not
-  allowed by LetsEncrypt for new sites, and will break for existing sites in
-  late 2020. See [ACME.md](docs/ACME.md).
+  `tls_private_key_path` lines under the `TLS` section. You can either
+  point these settings at an existing certificate and key, or you can
+  enable Synapse's built-in ACME (Let's Encrypt) support. Instructions
+  for having Synapse automatically provision and renew federation
+  certificates through ACME can be found at [ACME.md](docs/ACME.md).
+  Note that, as pointed out in that document, this feature will not
+  work with installs set up after November 2019.
 
   If you are using your own certificate, be sure to use a `.pem` file that
   includes the full certificate chain including any intermediate certificates
@@ -446,60 +403,6 @@ so, you will need to edit `homeserver.yaml`, as follows:
 For a more detailed guide to configuring your server for federation, see
 [federate.md](docs/federate.md).
 
-## Client Well-Known URI
-
-Setting up the client Well-Known URI is optional but if you set it up, it will
-allow users to enter their full username (e.g. `@user:<server_name>`) into clients
-which support well-known lookup to automatically configure the homeserver and
-identity server URLs. This is useful so that users don't have to memorize or think
-about the actual homeserver URL you are using.
-
-The URL `https://<server_name>/.well-known/matrix/client` should return JSON in
-the following format.
-
-```
-{
-  "m.homeserver": {
-    "base_url": "https://<matrix.example.com>"
-  }
-}
-```
-
-It can optionally contain identity server information as well.
-
-```
-{
-  "m.homeserver": {
-    "base_url": "https://<matrix.example.com>"
-  },
-  "m.identity_server": {
-    "base_url": "https://<identity.example.com>"
-  }
-}
-```
-
-To work in browser based clients, the file must be served with the appropriate
-Cross-Origin Resource Sharing (CORS) headers. A recommended value would be
-`Access-Control-Allow-Origin: *` which would allow all browser based clients to
-view it.
-
-In nginx this would be something like:
-```
-location /.well-known/matrix/client {
-    return 200 '{"m.homeserver": {"base_url": "https://<matrix.example.com>"}}';
-    default_type application/json;
-    add_header Access-Control-Allow-Origin *;
-}
-```
-
-You should also ensure the `public_baseurl` option in `homeserver.yaml` is set
-correctly. `public_baseurl` should be set to the URL that clients will use to
-connect to your server. This is the same URL you put for the `m.homeserver`
-`base_url` above.
-
-```
-public_baseurl: "https://<matrix.example.com>"
-```
 
 ## Email
 
@@ -518,7 +421,7 @@ email will be disabled.
 
 ## Registering a user
 
-The easiest way to create a new user is to do so from a client like [Element](https://element.io/).
+The easiest way to create a new user is to do so from a client like [Riot](https://riot.im).
 
 Alternatively you can do so from the command line if you have installed via pip.
 
@@ -557,9 +460,10 @@ This is critical from a security perspective to stop arbitrary Matrix users
 spidering 'internal' URLs on your network. At the very least we recommend that
 your loopback and RFC1918 IP addresses are blacklisted.
 
-This also requires the optional `lxml` python dependency to be  installed. This
-in turn requires the `libxml2` library to be available - on  Debian/Ubuntu this
-means `apt-get install libxml2-dev`, or equivalent for your OS.
+This also requires the optional `lxml` and `netaddr` python dependencies to be
+installed. This in turn requires the `libxml2` library to be available - on
+Debian/Ubuntu this means `apt-get install libxml2-dev`, or equivalent for
+your OS.
 
 # Troubleshooting Installation
 

MANIFEST.in

@@ -30,24 +30,23 @@ recursive-include synapse/static *.gif
 recursive-include synapse/static *.html
 recursive-include synapse/static *.js
 
-exclude .codecov.yml
-exclude .coveragerc
-exclude .dockerignore
-exclude .editorconfig
 exclude Dockerfile
-exclude mypy.ini
-exclude sytest-blacklist
+exclude .dockerignore
 exclude test_postgresql.sh
+exclude .editorconfig
+exclude sytest-blacklist
 
 include pyproject.toml
 recursive-include changelog.d *
 
 prune .buildkite
 prune .circleci
+prune .codecov.yml
+prune .coveragerc
 prune .github
-prune contrib
 prune debian
 prune demo/etc
 prune docker
+prune mypy.ini
 prune snap
 prune stubs

README.rst

@@ -1,7 +1,3 @@
-=========================================================
-Synapse |support| |development| |license| |pypi| |python|
-=========================================================
-
 .. contents::
 
 Introduction
@@ -41,7 +37,7 @@ which handle:
 - Eventually-consistent cryptographically secure synchronisation of room
   state across a global open network of federated servers and services
 - Sending and receiving extensible messages in a room with (optional)
-  end-to-end encryption
+  end-to-end encryption[1]
 - Inviting, joining, leaving, kicking, banning room members
 - Managing user accounts (registration, login, logout)
 - Using 3rd Party IDs (3PIDs) such as email addresses, phone numbers,
@@ -78,15 +74,7 @@ at the `Matrix spec <https://matrix.org/docs/spec>`_, and experiment with the
 
 Thanks for using Matrix!
 
-Support
-=======
-
-For support installing or managing Synapse, please join |room|_ (from a matrix.org
-account if necessary) and ask questions there. We do not use GitHub issues for
-support requests, only for bug reports and feature requests.
-
-.. |room| replace:: ``#synapse:matrix.org``
-.. _room: https://matrix.to/#/#synapse:matrix.org
+[1] End-to-end encryption is currently in beta: `blog post <https://matrix.org/blog/2016/11/21/matrixs-olm-end-to-end-encryption-security-assessment-released-and-implemented-cross-platform-on-riot-at-last>`_.
 
 
 Synapse Installation
@@ -108,11 +96,12 @@ Unless you are running a test instance of Synapse on your local machine, in
 general, you will need to enable TLS support before you can successfully
 connect from a client: see `<INSTALL.md#tls-certificates>`_.
 
-An easy way to get started is to login or register via Element at
-https://app.element.io/#/login or https://app.element.io/#/register respectively.
+An easy way to get started is to login or register via Riot at
+https://riot.im/app/#/login or https://riot.im/app/#/register respectively.
 You will need to change the server you are logging into from ``matrix.org``
 and instead specify a Homeserver URL of ``https://<server_name>:8448``
 (or just ``https://<server_name>`` if you are using a reverse proxy).
+(Leave the identity server as the default - see `Identity servers`_.)
 If you prefer to use another client, refer to our
 `client breakdown <https://matrix.org/docs/projects/clients-matrix>`_.
 
@@ -129,7 +118,7 @@ it, specify ``enable_registration: true`` in ``homeserver.yaml``. (It is then
 recommended to also set up CAPTCHA - see `<docs/CAPTCHA_SETUP.md>`_.)
 
 Once ``enable_registration`` is set to ``true``, it is possible to register a
-user via a Matrix client.
+user via `riot.im <https://riot.im/app/#/register>`_ or other Matrix clients.
 
 Your new user name will be formed partly from the ``server_name``, and partly
 from a localpart you specify when you create the account. Your name will take
@@ -175,6 +164,30 @@ versions of synapse.
 
 .. _UPGRADE.rst: UPGRADE.rst
 
+
+Using PostgreSQL
+================
+
+Synapse offers two database engines:
+ * `SQLite <https://sqlite.org/>`_
+ * `PostgreSQL <https://www.postgresql.org>`_
+
+By default Synapse uses SQLite in and doing so trades performance for convenience.
+SQLite is only recommended in Synapse for testing purposes or for servers with
+light workloads.
+
+Almost all installations should opt to use PostreSQL. Advantages include:
+
+* significant performance improvements due to the superior threading and
+  caching model, smarter query optimiser
+* allowing the DB to be run on separate hardware
+* allowing basic active/backup high-availability with a "hot spare" synapse
+  pointing at the same DB master, as well as enabling DB replication in
+  synapse itself.
+
+For information on how to install and use PostgreSQL, please see
+`docs/postgres.md <docs/postgres.md>`_.
+
 .. _reverse-proxy:
 
 Using a reverse proxy with Synapse
@@ -183,7 +196,7 @@ Using a reverse proxy with Synapse
 It is recommended to put a reverse proxy such as
 `nginx <https://nginx.org/en/docs/http/ngx_http_proxy_module.html>`_,
 `Apache <https://httpd.apache.org/docs/current/mod/mod_proxy_http.html>`_,
-`Caddy <https://caddyserver.com/docs/quick-starts/reverse-proxy>`_ or
+`Caddy <https://caddyserver.com/docs/proxy>`_ or
 `HAProxy <https://www.haproxy.org/>`_ in front of Synapse. One advantage of
 doing so is that it means that you can expose the default https port (443) to
 Matrix clients without needing to run Synapse with root privileges.
@@ -223,9 +236,10 @@ email address.
 Password reset
 ==============
 
-Users can reset their password through their client. Alternatively, a server admin
-can reset a users password using the `admin API <docs/admin_api/user_admin_api.rst#reset-password>`_
-or by directly editing the database as shown below.
+If a user has registered an email address to their account using an identity
+server, they can request a password-reset token via clients such as Riot.
+
+A manual password reset can be done via direct database access as follows.
 
 First calculate the hash of the new password::
 
@@ -234,7 +248,7 @@ First calculate the hash of the new password::
     Confirm password:
     $2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
 
-Then update the ``users`` table in the database::
+Then update the `users` table in the database::
 
     UPDATE users SET password_hash='$2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'
         WHERE name='@test:test.com';
@@ -256,27 +270,23 @@ directory of your choice::
 Synapse has a number of external dependencies, that are easiest
 to install using pip and a virtualenv::
 
-    python3 -m venv ./env
-    source ./env/bin/activate
-    pip install -e ".[all,test]"
+    virtualenv -p python3 env
+    source env/bin/activate
+    python -m pip install --no-use-pep517 -e ".[all]"
 
 This will run a process of downloading and installing all the needed
-dependencies into a virtual env. If any dependencies fail to install,
-try installing the failing modules individually::
+dependencies into a virtual env.
 
-    pip install -e "module-name"
-
-Once this is done, you may wish to run Synapse's unit tests to
-check that everything is installed correctly::
+Once this is done, you may wish to run Synapse's unit tests, to
+check that everything is installed as it should be::
 
     python -m twisted.trial tests
 
-This should end with a 'PASSED' result (note that exact numbers will
-differ)::
+This should end with a 'PASSED' result::
 
-    Ran 1337 tests in 716.064s
+    Ran 143 tests in 0.601s
 
-    PASSED (skips=15, successes=1322)
+    PASSED (successes=143)
 
 Running the Integration Tests
 =============================
@@ -290,12 +300,22 @@ Testing with SyTest is recommended for verifying that changes related to the
 Client-Server API are functioning correctly. See the `installation instructions
 <https://github.com/matrix-org/sytest#installing>`_ for details.
 
+Building Internal API Documentation
+===================================
+
+Before building internal API documentation install sphinx and
+sphinxcontrib-napoleon::
+
+    pip install sphinx
+    pip install sphinxcontrib-napoleon
+
+Building internal API documentation::
+
+    python setup.py build_sphinx
+
 Troubleshooting
 ===============
 
-Need help? Join our community support room on Matrix:
-`#synapse:matrix.org <https://matrix.to/#/#synapse:matrix.org>`_
-
 Running out of File Handles
 ---------------------------
 
@@ -374,23 +394,3 @@ something like the following in their logs::
 
 This is normally caused by a misconfiguration in your reverse-proxy. See
 `<docs/reverse_proxy.md>`_ and double-check that your settings are correct.
-
-.. |support| image:: https://img.shields.io/matrix/synapse:matrix.org?label=support&logo=matrix
-  :alt: (get support on #synapse:matrix.org)
-  :target: https://matrix.to/#/#synapse:matrix.org
-
-.. |development| image:: https://img.shields.io/matrix/synapse-dev:matrix.org?label=development&logo=matrix
-  :alt: (discuss development on #synapse-dev:matrix.org)
-  :target: https://matrix.to/#/#synapse-dev:matrix.org
-
-.. |license| image:: https://img.shields.io/github/license/matrix-org/synapse
-  :alt: (check license in LICENSE file)
-  :target: LICENSE
-
-.. |pypi| image:: https://img.shields.io/pypi/v/matrix-synapse
-  :alt: (latest version released on PyPi)
-  :target: https://pypi.org/project/matrix-synapse
-
-.. |python| image:: https://img.shields.io/pypi/pyversions/matrix-synapse
-  :alt: (supported python versions)
-  :target: https://pypi.org/project/matrix-synapse

UPGRADE.rst

@@ -75,322 +75,6 @@ for example:
      wget https://packages.matrix.org/debian/pool/main/m/matrix-synapse-py3/matrix-synapse-py3_1.3.0+stretch1_amd64.deb
      dpkg -i matrix-synapse-py3_1.3.0+stretch1_amd64.deb
 
-Upgrading to v1.25.0
-====================
-
-Blacklisting IP ranges
-----------------------
-
-Synapse v1.25.0 includes new settings, ``ip_range_blacklist`` and
-``ip_range_whitelist``, for controlling outgoing requests from Synapse for federation,
-identity servers, push, and for checking key validity for third-party invite events.
-The previous setting, ``federation_ip_range_blacklist``, is deprecated. The new
-``ip_range_blacklist`` defaults to private IP ranges if it is not defined.
-
-If you have never customised ``federation_ip_range_blacklist`` it is recommended
-that you remove that setting.
-
-If you have customised ``federation_ip_range_blacklist`` you should update the
-setting name to ``ip_range_blacklist``.
-
-If you have a custom push server that is reached via private IP space you may
-need to customise ``ip_range_blacklist`` or ``ip_range_whitelist``.
-
-Upgrading to v1.24.0
-====================
-
-Custom OpenID Connect mapping provider breaking change
-------------------------------------------------------
-
-This release allows the OpenID Connect mapping provider to perform normalisation
-of the localpart of the Matrix ID. This allows for the mapping provider to
-specify different algorithms, instead of the [default way](https://matrix.org/docs/spec/appendices#mapping-from-other-character-sets).
-
-If your Synapse configuration uses a custom mapping provider
-(`oidc_config.user_mapping_provider.module` is specified and not equal to
-`synapse.handlers.oidc_handler.JinjaOidcMappingProvider`) then you *must* ensure
-that `map_user_attributes` of the mapping provider performs some normalisation
-of the `localpart` returned. To match previous behaviour you can use the
-`map_username_to_mxid_localpart` function provided by Synapse. An example is
-shown below:
-
-.. code-block:: python
-
-  from synapse.types import map_username_to_mxid_localpart
-
-  class MyMappingProvider:
-      def map_user_attributes(self, userinfo, token):
-          # ... your custom logic ...
-          sso_user_id = ...
-          localpart = map_username_to_mxid_localpart(sso_user_id)
-
-          return {"localpart": localpart}
-
-Removal historical Synapse Admin API 
-------------------------------------
-
-Historically, the Synapse Admin API has been accessible under:
-
-* ``/_matrix/client/api/v1/admin``
-* ``/_matrix/client/unstable/admin``
-* ``/_matrix/client/r0/admin``
-* ``/_synapse/admin/v1``
-
-The endpoints with ``/_matrix/client/*`` prefixes have been removed as of v1.24.0.
-The Admin API is now only accessible under:
-
-* ``/_synapse/admin/v1``
-
-The only exception is the `/admin/whois` endpoint, which is
-`also available via the client-server API <https://matrix.org/docs/spec/client_server/r0.6.1#get-matrix-client-r0-admin-whois-userid>`_.
-
-The deprecation of the old endpoints was announced with Synapse 1.20.0 (released
-on 2020-09-22) and makes it easier for homeserver admins to lock down external
-access to the Admin API endpoints.
-
-Upgrading to v1.23.0
-====================
-
-Structured logging configuration breaking changes
--------------------------------------------------
-
-This release deprecates use of the ``structured: true`` logging configuration for
-structured logging. If your logging configuration contains ``structured: true``
-then it should be modified based on the `structured logging documentation
-<https://github.com/matrix-org/synapse/blob/master/docs/structured_logging.md>`_.
-
-The ``structured`` and ``drains`` logging options are now deprecated and should
-be replaced by standard logging configuration of ``handlers`` and ``formatters``.
-
-A future will release of Synapse will make using ``structured: true`` an error.
-
-Upgrading to v1.22.0
-====================
-
-ThirdPartyEventRules breaking changes
--------------------------------------
-
-This release introduces a backwards-incompatible change to modules making use of
-``ThirdPartyEventRules`` in Synapse. If you make use of a module defined under the
-``third_party_event_rules`` config option, please make sure it is updated to handle
-the below change:
-
-The ``http_client`` argument is no longer passed to modules as they are initialised. Instead,
-modules are expected to make use of the ``http_client`` property on the ``ModuleApi`` class.
-Modules are now passed a ``module_api`` argument during initialisation, which is an instance of
-``ModuleApi``. ``ModuleApi`` instances have a ``http_client`` property which acts the same as
-the ``http_client`` argument previously passed to ``ThirdPartyEventRules`` modules.
-
-Upgrading to v1.21.0
-====================
-
-Forwarding ``/_synapse/client`` through your reverse proxy
-----------------------------------------------------------
-
-The `reverse proxy documentation
-<https://github.com/matrix-org/synapse/blob/develop/docs/reverse_proxy.md>`_ has been updated
-to include reverse proxy directives for ``/_synapse/client/*`` endpoints. As the user password
-reset flow now uses endpoints under this prefix, **you must update your reverse proxy
-configurations for user password reset to work**.
-
-Additionally, note that the `Synapse worker documentation
-<https://github.com/matrix-org/synapse/blob/develop/docs/workers.md>`_ has been updated to
- state that the ``/_synapse/client/password_reset/email/submit_token`` endpoint can be handled
-by all workers. If you make use of Synapse's worker feature, please update your reverse proxy
-configuration to reflect this change.
-
-New HTML templates
-------------------
-
-A new HTML template,
-`password_reset_confirmation.html <https://github.com/matrix-org/synapse/blob/develop/synapse/res/templates/password_reset_confirmation.html>`_,
-has been added to the ``synapse/res/templates`` directory. If you are using a
-custom template directory, you may want to copy the template over and modify it.
-
-Note that as of v1.20.0, templates do not need to be included in custom template
-directories for Synapse to start. The default templates will be used if a custom
-template cannot be found.
-
-This page will appear to the user after clicking a password reset link that has
-been emailed to them.
-
-To complete password reset, the page must include a way to make a `POST`
-request to
-``/_synapse/client/password_reset/{medium}/submit_token``
-with the query parameters from the original link, presented as a URL-encoded form. See the file
-itself for more details.
-
-Updated Single Sign-on HTML Templates
--------------------------------------
-
-The ``saml_error.html`` template was removed from Synapse and replaced with the
-``sso_error.html`` template. If your Synapse is configured to use SAML and a
-custom ``sso_redirect_confirm_template_dir`` configuration then any customisations
-of the ``saml_error.html`` template will need to be merged into the ``sso_error.html``
-template. These templates are similar, but the parameters are slightly different:
-
-* The ``msg`` parameter should be renamed to ``error_description``.
-* There is no longer a ``code`` parameter for the response code.
-* A string ``error`` parameter is available that includes a short hint of why a
-  user is seeing the error page.
-
-Upgrading to v1.18.0
-====================
-
-Docker `-py3` suffix will be removed in future versions
--------------------------------------------------------
-
-From 10th August 2020, we will no longer publish Docker images with the `-py3` tag suffix. The images tagged with the `-py3` suffix have been identical to the non-suffixed tags since release 0.99.0, and the suffix is obsolete.
-
-On 10th August, we will remove the `latest-py3` tag. Existing per-release tags (such as `v1.18.0-py3`) will not be removed, but no new `-py3` tags will be added.
-
-Scripts relying on the `-py3` suffix will need to be updated.
-
-Redis replication is now recommended in lieu of TCP replication
----------------------------------------------------------------
-
-When setting up worker processes, we now recommend the use of a Redis server for replication. **The old direct TCP connection method is deprecated and will be removed in a future release.**
-See `docs/workers.md <docs/workers.md>`_ for more details.
-
-Upgrading to v1.14.0
-====================
-
-This version includes a database update which is run as part of the upgrade,
-and which may take a couple of minutes in the case of a large server. Synapse
-will not respond to HTTP requests while this update is taking place.
-
-Upgrading to v1.13.0
-====================
-
-Incorrect database migration in old synapse versions
-----------------------------------------------------
-
-A bug was introduced in Synapse 1.4.0 which could cause the room directory to
-be incomplete or empty if Synapse was upgraded directly from v1.2.1 or
-earlier, to versions between v1.4.0 and v1.12.x.
-
-This will *not* be a problem for Synapse installations which were:
- * created at v1.4.0 or later,
- * upgraded via v1.3.x, or
- * upgraded straight from v1.2.1 or earlier to v1.13.0 or later.
-
-If completeness of the room directory is a concern, installations which are
-affected can be repaired as follows:
-
-1. Run the following sql from a `psql` or `sqlite3` console:
-
-   .. code:: sql
-
-     INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES
-        ('populate_stats_process_rooms', '{}', 'current_state_events_membership');
-
-     INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES
-        ('populate_stats_process_users', '{}', 'populate_stats_process_rooms');
-
-2. Restart synapse.
-
-New Single Sign-on HTML Templates
----------------------------------
-
-New templates (``sso_auth_confirm.html``, ``sso_auth_success.html``, and
-``sso_account_deactivated.html``) were added to Synapse. If your Synapse is
-configured to use SSO and a custom  ``sso_redirect_confirm_template_dir``
-configuration then these templates will need to be copied from
-`synapse/res/templates <synapse/res/templates>`_ into that directory.
-
-Synapse SSO Plugins Method Deprecation
---------------------------------------
-
-Plugins using the ``complete_sso_login`` method of
-``synapse.module_api.ModuleApi`` should update to using the async/await
-version ``complete_sso_login_async`` which includes additional checks. The
-non-async version is considered deprecated.
-
-Rolling back to v1.12.4 after a failed upgrade
-----------------------------------------------
-
-v1.13.0 includes a lot of large changes. If something problematic occurs, you
-may want to roll-back to a previous version of Synapse. Because v1.13.0 also
-includes a new database schema version, reverting that version is also required
-alongside the generic rollback instructions mentioned above. In short, to roll
-back to v1.12.4 you need to:
-
-1. Stop the server
-2. Decrease the schema version in the database:
-
-   .. code:: sql
-
-      UPDATE schema_version SET version = 57;
-
-3. Downgrade Synapse by following the instructions for your installation method
-   in the "Rolling back to older versions" section above.
-
-
-Upgrading to v1.12.0
-====================
-
-This version includes a database update which is run as part of the upgrade,
-and which may take some time (several hours in the case of a large
-server). Synapse will not respond to HTTP requests while this update is taking
-place.
-
-This is only likely to be a problem in the case of a server which is
-participating in many rooms.
-
-0. As with all upgrades, it is recommended that you have a recent backup of
-   your database which can be used for recovery in the event of any problems.
-
-1. As an initial check to see if you will be affected, you can try running the
-   following query from the `psql` or `sqlite3` console. It is safe to run it
-   while Synapse is still running.
-
-   .. code:: sql
-
-      SELECT MAX(q.v) FROM (
-        SELECT (
-          SELECT ej.json AS v
-          FROM state_events se INNER JOIN event_json ej USING (event_id)
-          WHERE se.room_id=rooms.room_id AND se.type='m.room.create' AND se.state_key=''
-          LIMIT 1
-        ) FROM rooms WHERE rooms.room_version IS NULL
-      ) q;
-
-   This query will take about the same amount of time as the upgrade process: ie,
-   if it takes 5 minutes, then it is likely that Synapse will be unresponsive for
-   5 minutes during the upgrade.
-
-   If you consider an outage of this duration to be acceptable, no further
-   action is necessary and you can simply start Synapse 1.12.0.
-
-   If you would prefer to reduce the downtime, continue with the steps below.
-
-2. The easiest workaround for this issue is to manually
-   create a new index before upgrading. On PostgreSQL, his can be done as follows:
-
-   .. code:: sql
-
-      CREATE INDEX CONCURRENTLY tmp_upgrade_1_12_0_index
-      ON state_events(room_id) WHERE type = 'm.room.create';
-
-   The above query may take some time, but is also safe to run while Synapse is
-   running.
-
-   We assume that no SQLite users have databases large enough to be
-   affected. If you *are* affected, you can run a similar query, omitting the
-   ``CONCURRENTLY`` keyword. Note however that this operation may in itself cause
-   Synapse to stop running for some time. Synapse admins are reminded that
-   `SQLite is not recommended for use outside a test
-   environment <https://github.com/matrix-org/synapse/blob/master/README.rst#using-postgresql>`_.
-
-3. Once the index has been created, the ``SELECT`` query in step 1 above should
-   complete quickly. It is therefore safe to upgrade to Synapse 1.12.0.
-
-4. Once Synapse 1.12.0 has successfully started and is responding to HTTP
-   requests, the temporary index can be removed:
-
-   .. code:: sql
-
-      DROP INDEX tmp_upgrade_1_12_0_index;
 
 Upgrading to v1.10.0
 ====================

changelog.d/6446.misc

@@ -0,0 +1 @@
+Add benchmarks for LruCache.

changelog.d/6573.bugfix

@@ -0,0 +1 @@
+Don't attempt to use an invalid sqlite config if no database configuration is provided. Contributed by @nekatak.

changelog.d/6634.bugfix

@@ -0,0 +1 @@
+Fix single-sign on with CAS systems: pass the same service URL when requesting the CAS ticket and when calling the `proxyValidate` URL. Contributed by @Naugrimm.

changelog.d/6639.bugfix

@@ -0,0 +1 @@
+Fix missing field `default` when fetching user-defined push rules.

changelog.d/6892.doc

@@ -0,0 +1 @@
+Update Debian installation instructions to recommend installing the `virtualenv` package instead of `python3-virtualenv`.

changelog.d/6899.bugfix

@@ -0,0 +1 @@
+Improve error responses when accessing remote public room lists.

changelog.d/6946.bugfix

@@ -0,0 +1 @@
+Transfer alias mappings on room upgrade.

changelog.d/6988.doc

@@ -0,0 +1 @@
+Improve the documentation for database configuration.

changelog.d/7006.feature

@@ -0,0 +1 @@
+Extend the `web_client_location` option to accept an absolute URL to use as a redirect. Adds a warning when running the web client on the same hostname as homeserver. Contributed by Martin Milata.

changelog.d/7009.feature

@@ -0,0 +1 @@
+Set `Referrer-Policy` header to `no-referrer` on media downloads.

changelog.d/7010.misc

@@ -0,0 +1 @@
+Change device list streams to have one row per ID.

changelog.d/7011.misc

@@ -0,0 +1 @@
+Remove concept of a non-limited stream.

changelog.d/7024.misc

@@ -0,0 +1 @@
+Move catchup of replication streams logic to worker.

changelog.d/7051.feature

@@ -0,0 +1 @@
+Admin API `POST /_synapse/admin/v1/join/<roomIdOrAlias>` to join users to a room like `auto_join_rooms` for creation of users.

changelog.d/7068.bugfix

@@ -0,0 +1 @@
+Ensure that a user inteactive authentication session is tied to a single request.

changelog.d/7089.bugfix

@@ -0,0 +1 @@
+Fix a bug in the federation API which could cause occasional "Failed to get PDU" errors.

changelog.d/7096.feature

@@ -0,0 +1 @@
+Add options to prevent users from changing their profile or associated 3PIDs.

changelog.d/7102.feature

@@ -0,0 +1 @@
+Support SSO in the user interactive authentication workflow.

changelog.d/7107.doc

@@ -0,0 +1 @@
+Update pre-built package name for FreeBSD.

changelog.d/7109.bugfix

@@ -0,0 +1 @@
+Return the proper error (M_BAD_ALIAS) when a non-existant canonical alias is provided.

changelog.d/7110.misc

@@ -0,0 +1 @@
+Convert some of synapse.rest.media to async/await.

changelog.d/7115.misc

@@ -0,0 +1 @@
+De-duplicate / remove unused REST code for login and auth.

changelog.d/7116.misc

@@ -0,0 +1 @@
+Convert `*StreamRow` classes to inner classes.

changelog.d/7117.bugfix

@@ -0,0 +1 @@
+Fix a bug which meant that groups updates were not correctly replicated between workers.

changelog.d/7118.feature

@@ -0,0 +1 @@
+Allow server admins to define and enforce a password policy (MSC2000).

changelog.d/7119.doc

@@ -0,0 +1 @@
+Update postgres docs with login troubleshooting information.

changelog.d/7120.misc

@@ -0,0 +1 @@
+Clean up some LoggingContext code.

changelog.d/7128.misc

@@ -0,0 +1 @@
+Add explicit `instance_id` for USER_SYNC commands and remove implicit `conn_id` usage.

changelog.d/7133.bugfix

@@ -0,0 +1 @@
+Fix starting workers when federation sending not split out.

changelog.d/7136.misc

@@ -0,0 +1 @@
+Refactored the CAS authentication logic to a separate class.

changelog.d/7137.removal

@@ -0,0 +1 @@
+Remove nonfunctional `captcha_bypass_secret` option from `homeserver.yaml`.

changelog.d/7141.doc

@@ -0,0 +1 @@
+Clean up INSTALL.md a bit.

changelog.d/7147.doc

@@ -0,0 +1 @@
+Add documentation for running a local CAS server for testing.

changelog.d/7150.bugfix

@@ -0,0 +1 @@
+Ensure `is_verified` is a boolean in responses to `GET /_matrix/client/r0/room_keys/keys`. Also warn the user if they forgot the `version` query param.

changelog.d/7151.bugfix

@@ -0,0 +1 @@
+Fix error page being shown when a custom SAML handler attempted to redirect when processing an auth response.

changelog.d/7152.feature

@@ -0,0 +1 @@
+Improve the support for SSO authentication on the login fallback page.

changelog.d/7153.feature

@@ -0,0 +1 @@
+Always whitelist the login fallback in the SSO configuration if `public_baseurl` is set.

changelog.d/7155.bugfix

@@ -0,0 +1 @@
+Avoid importing `sqlite3` when using the postgres backend. Contributed by David Vo.

changelog.d/7157.misc

@@ -0,0 +1 @@
+Add tests for outbound device pokes.

changelog.d/7158.misc

@@ -0,0 +1 @@
+Fix device list update stream ids going backward.

changelog.d/7159.bugfix

@@ -0,0 +1 @@
+Fix excessive CPU usage by `prune_old_outbound_device_pokes` job.

changelog.d/7160.feature

@@ -0,0 +1 @@
+Always send users their own device updates.

changelog.d/7167.doc

@@ -0,0 +1 @@
+Improve README.md by being explicit about public IP recommendation for TURN relaying.

changelog.d/7171.doc

@@ -0,0 +1 @@
+Fix a small typo in the `metrics_flags` config option.

changelog.d/7177.bugfix

@@ -0,0 +1 @@
+Fix a bug which could cause outbound federation traffic to stop working if a client uploaded an incorrect e2e device signature.

changelog.d/7178.bugfix

@@ -0,0 +1 @@
+Fix a bug which could cause incorrect 'cyclic dependency' error.

changelog.d/7181.misc

@@ -0,0 +1 @@
+Clean up some LoggingContext code.

changelog.d/7183.misc

@@ -0,0 +1 @@
+Clean up some LoggingContext code.

changelog.d/7184.misc

@@ -0,0 +1 @@
+Convert some of synapse.rest.media to async/await.

changelog.d/7185.misc

@@ -0,0 +1 @@
+Move client command handling out of TCP protocol.

changelog.d/7186.feature

@@ -0,0 +1 @@
+Support SSO in the user interactive authentication workflow.

changelog.d/7187.misc

@@ -0,0 +1 @@
+Move server command handling out of TCP protocol.

changelog.d/7188.misc

@@ -0,0 +1 @@
+Fix consistency of HTTP status codes reported in log lines.

changelog.d/7190.misc

@@ -0,0 +1 @@
+Only run one background database update at a time.

changelog.d/7191.feature

@@ -0,0 +1 @@
+Admin users are no longer required to be in a room to create an alias for it.

changelog.d/7192.misc

@@ -0,0 +1 @@
+Remove sent outbound device list pokes from the database.

changelog.d/7193.misc

@@ -0,0 +1 @@
+Add a background database update job to clear out duplicate `device_lists_outbound_pokes`.

changelog.d/7195.misc

@@ -0,0 +1 @@
+Move catchup of replication streams logic to worker.

changelog.d/7199.bugfix

@@ -0,0 +1 @@
+Fix a bug that could cause a user to be invited to a server notices (aka System Alerts) room without any notice being sent.

changelog.d/7203.bugfix

@@ -0,0 +1 @@
+Fix some worker-mode replication handling not being correctly recorded in CPU usage stats.

changelog.d/7207.misc

@@ -0,0 +1 @@
+Remove some extraneous debugging log lines.

changelog.d/7219.misc

@@ -0,0 +1 @@
+Add typing information to federation server code.

changelog.d/7226.misc

@@ -0,0 +1 @@
+Move catchup of replication streams logic to worker.

changelog.d/7228.misc

@@ -0,0 +1 @@
+Unblacklist '/upgrade creates a new room' sytest for workers.

changelog.d/7230.feature

@@ -0,0 +1 @@
+Require admin privileges to enable room encryption by default. This does not affect existing rooms.

changelog.d/7233.misc

@@ -0,0 +1 @@
+Remove redundant checks on `daemonize` from synctl.

changelog.d/7234.doc

@@ -0,0 +1 @@
+Update the contributed documentation on managing synapse workers with systemd, and bring it into the core distribution.

changelog.d/7235.feature

@@ -0,0 +1 @@
+Improve the support for SSO authentication on the login fallback page.

changelog.d/7236.misc

@@ -0,0 +1 @@
+Upgrade jQuery to v3.4.1 on fallback login/registration pages.

changelog.d/7237.misc

@@ -0,0 +1 @@
+Change log line that told user to implement onLogin/onRegister fallback js functions to a warning, instead of an info, so it's more visible.

changelog.d/7238.doc

@@ -0,0 +1 @@
+Add documentation to the `password_providers` config option. Add known password provider implementations to docs.

changelog.d/7240.bugfix

@@ -0,0 +1 @@
+Do not allow a deactivated user to login via SSO.

changelog.d/7241.misc

@@ -0,0 +1 @@
+Convert some of synapse.rest.media to async/await.

changelog.d/7243.misc

@@ -0,0 +1 @@
+Correct the parameters of a test fixture. Contributed by Isaiah Singletary.

changelog.d/7248.doc

@@ -0,0 +1 @@
+Add documentation to the `password_providers` config option. Add known password provider implementations to docs.

changelog.d/7249.bugfix

@@ -0,0 +1 @@
+Fix --help command-line argument.

changelog.d/7251.doc

@@ -0,0 +1 @@
+Modify suggested nginx reverse proxy configuration to match Synapse's default file upload size. Contributed by @ProCycleDev.

changelog.d/7255.bugfix

@@ -0,0 +1 @@
+Fix a bug that prevented cross-signing with users on worker-mode synapses.

changelog.d/7259.bugfix

@@ -0,0 +1 @@
+ Do not allow a deactivated user to login via SSO.

changelog.d/7260.bugfix

@@ -0,0 +1 @@
+Fix room publish permissions not being checked on room creation.

changelog.d/7261.misc

@@ -0,0 +1 @@
+Convert auth handler to async/await.

changelog.d/7265.feature

@@ -0,0 +1 @@
+Add a config option for specifying the value of the Accept-Language HTTP header when generating URL previews.

changelog.d/7274.bugfix

@@ -0,0 +1 @@
+Fix a sql query introduced in Synapse 1.12.0 which could cause large amounts of logging to the postgres slow-query log.

changelog.d/7289.bugfix

@@ -0,0 +1 @@
+Fix a bug with cross-signing devices with remote users when they did not share a room with any user on the local homeserver.

changelog.d/7329.misc

@@ -0,0 +1 @@
+Move catchup of replication streams logic to worker.

changelog.d/8802.doc

@@ -1 +0,0 @@
-Fix the "Event persist rate" section of the included grafana dashboard by adding missing prometheus rules.

changelog.d/8821.bugfix

@@ -1 +0,0 @@
-Apply an IP range blacklist to push and key revocation requests.