Changelog

As mentioned in the MSC, a user can rescind (take back) a knock while it
is pending by sending a leave event to the room. This will set their
membership to leave instead of knock.

Now, this functionality already worked before this commit for rooms that
the homeserver was already in. What didn't work was:

* Rescinding a knock over federation to a room with active homeservers
* Rescinding a knock over federation to a room with inactive homeservers

This commit addresses the second bullet point, and leaves the first
bullet point as a TODO (as it is an edge case an not immediately obvious
how it would be done).

What this commit does is crib off the same functionality as locally
rejecting an invite. That occurs when we are unable to contact the
homeserver that originally sent us an invite. Instead an out-of-band
leave membership event will be generated and sent to clients locally.

The same is happening here. You can mostly ignore the new
generate_local_out_of_band_membership methods, those are just some
structural bits to allow us to call that method from RoomMemberHandler.

The real meat of this commit is moving about and adding some logic in
`update_membership_locked`, specifically for when we're updating a
user's membership to "leave". There was already some code in there to
check whether the room to send the leave to was a room the homeserver is
not currently a part of. In that case, we'd remote reject the knock.
This commit just extends that to also rescind knocks if the user's
membership in the room is currently "knock". We skip the remote attempt
for now and go straight to generating a local leave membership event.

.buildkite/scripts/create_postgres_db.py

@@ -15,7 +15,6 @@
 # limitations under the License.
 
 import logging
-
 from synapse.storage.engines import create_engine
 
 logger = logging.getLogger("create_postgres_db")

.buildkite/scripts/test_old_deps.sh

@@ -6,11 +6,8 @@
 set -ex
 
 apt-get update
-apt-get install -y python3.5 python3.5-dev python3-pip libxml2-dev libxslt-dev xmlsec1 zlib1g-dev tox
+apt-get install -y python3.5 python3.5-dev python3-pip libxml2-dev libxslt-dev zlib1g-dev tox
 
 export LANG="C.UTF-8"
 
-# Prevent virtualenv from auto-updating pip to an incompatible version
-export VIRTUALENV_NO_DOWNLOAD=1
-
 exec tox -e py35-old,combine

.circleci/config.yml

@@ -5,29 +5,30 @@ jobs:
       - image: docker:git
     steps:
       - checkout
+      - setup_remote_docker
       - docker_prepare
       - run: docker login --username $DOCKER_HUB_USERNAME --password $DOCKER_HUB_PASSWORD
-      # for release builds, we want to get the amd64 image out asap, so first
-      # we do an amd64-only build, before following up with a multiarch build.
       - docker_build:
           tag: -t matrixdotorg/synapse:${CIRCLE_TAG}
           platforms: linux/amd64
       - docker_build:
           tag: -t matrixdotorg/synapse:${CIRCLE_TAG}
-          platforms: linux/amd64,linux/arm64
+          platforms: linux/amd64,linux/arm/v7,linux/arm64
 
   dockerhubuploadlatest:
     docker:
       - image: docker:git
     steps:
       - checkout
+      - setup_remote_docker
       - docker_prepare
       - run: docker login --username $DOCKER_HUB_USERNAME --password $DOCKER_HUB_PASSWORD
-      # for `latest`, we don't want the arm images to disappear, so don't update the tag
-      # until all of the platforms are built.
       - docker_build:
           tag: -t matrixdotorg/synapse:latest
-          platforms: linux/amd64,linux/arm64
+          platforms: linux/amd64
+      - docker_build:
+          tag: -t matrixdotorg/synapse:latest
+          platforms: linux/amd64,linux/arm/v7,linux/arm64
 
 workflows:
   build:
@@ -45,16 +46,12 @@ workflows:
 
 commands:
   docker_prepare:
-    description: Sets up a remote docker server, downloads the buildx cli plugin, and enables multiarch images
+    description: Downloads the buildx cli plugin and enables multiarch images
     parameters:
       buildx_version:
         type: string
         default: "v0.4.1"
     steps:
-      - setup_remote_docker:
-          # 19.03.13 was the most recent available on circleci at the time of
-          # writing.
-          version: 19.03.13
       - run: apk add --no-cache curl
       - run: mkdir -vp ~/.docker/cli-plugins/ ~/dockercache
       - run: curl --silent -L "https://github.com/docker/buildx/releases/download/<< parameters.buildx_version >>/buildx-<< parameters.buildx_version >>.linux-amd64" > ~/.docker/cli-plugins/docker-buildx

.gitignore

@@ -12,12 +12,10 @@
 _trial_temp/
 _trial_temp*/
 /out
-.DS_Store
 
 # stuff that is likely to exist when you run a server locally
 /*.db
 /*.log
-/*.log.*
 /*.log.config
 /*.pid
 /.python-version

CONTRIBUTING.md

@@ -1,31 +1,4 @@
-Welcome to Synapse
-
-This document aims to get you started with contributing to this repo! 
-
-- [1. Who can contribute to Synapse?](#1-who-can-contribute-to-synapse)
-- [2. What do I need?](#2-what-do-i-need)
-- [3. Get the source.](#3-get-the-source)
-- [4. Install the dependencies](#4-install-the-dependencies)
-  * [Under Unix (macOS, Linux, BSD, ...)](#under-unix-macos-linux-bsd-)
-  * [Under Windows](#under-windows)
-- [5. Get in touch.](#5-get-in-touch)
-- [6. Pick an issue.](#6-pick-an-issue)
-- [7. Turn coffee and documentation into code and documentation!](#7-turn-coffee-and-documentation-into-code-and-documentation)
-- [8. Test, test, test!](#8-test-test-test)
-  * [Run the linters.](#run-the-linters)
-  * [Run the unit tests.](#run-the-unit-tests)
-  * [Run the integration tests.](#run-the-integration-tests)
-- [9. Submit your patch.](#9-submit-your-patch)
-  * [Changelog](#changelog)
-    + [How do I know what to call the changelog file before I create the PR?](#how-do-i-know-what-to-call-the-changelog-file-before-i-create-the-pr)
-    + [Debian changelog](#debian-changelog)
-  * [Sign off](#sign-off)
-- [10. Turn feedback into better code.](#10-turn-feedback-into-better-code)
-- [11. Find a new issue.](#11-find-a-new-issue)
-- [Notes for maintainers on merging PRs etc](#notes-for-maintainers-on-merging-prs-etc)
-- [Conclusion](#conclusion)
-
-# 1. Who can contribute to Synapse?
+# Contributing code to Synapse
 
 Everyone is welcome to contribute code to [matrix.org
 projects](https://github.com/matrix-org), provided that they are willing to
@@ -36,179 +9,70 @@ license the code under the same terms as the project's overall 'outbound'
 license - in our case, this is almost always Apache Software License v2 (see
 [LICENSE](LICENSE)).
 
-# 2. What do I need?
-
-The code of Synapse is written in Python 3. To do pretty much anything, you'll need [a recent version of Python 3](https://wiki.python.org/moin/BeginnersGuide/Download).
-
-The source code of Synapse is hosted on GitHub. You will also need [a recent version of git](https://github.com/git-guides/install-git).
-
-For some tests, you will need [a recent version of Docker](https://docs.docker.com/get-docker/).
-
-
-# 3. Get the source.
+## How to contribute
 
 The preferred and easiest way to contribute changes is to fork the relevant
-project on GitHub, and then [create a pull request](
+project on github, and then [create a pull request](
 https://help.github.com/articles/using-pull-requests/) to ask us to pull your
 changes into our repo.
 
-Please base your changes on the `develop` branch.
+Some other points to follow:
 
-```sh
-git clone git@github.com:YOUR_GITHUB_USER_NAME/synapse.git
-git checkout develop
-```
+ * Please base your changes on the `develop` branch.
 
-If you need help getting started with git, this is beyond the scope of the document, but you
-can find many good git tutorials on the web.
+ * Please follow the [code style requirements](#code-style).
 
-# 4. Install the dependencies
+ * Please include a [changelog entry](#changelog) with each PR.
 
-## Under Unix (macOS, Linux, BSD, ...)
+ * Please [sign off](#sign-off) your contribution.
 
-Once you have installed Python 3 and added the source, please open a terminal and
-setup a *virtualenv*, as follows:
+ * Please keep an eye on the pull request for feedback from the [continuous
+   integration system](#continuous-integration-and-testing) and try to fix any
+   errors that come up.
 
-```sh
-cd path/where/you/have/cloned/the/repository
-python3 -m venv ./env
-source ./env/bin/activate
-pip install -e ".[all,lint,mypy,test]"
-pip install tox
-```
+ * If you need to [update your PR](#updating-your-pull-request), just add new
+   commits to your branch rather than rebasing.
 
-This will install the developer dependencies for the project.
-
-## Under Windows
-
-TBD
-
-
-# 5. Get in touch.
-
-Join our developer community on Matrix: #synapse-dev:matrix.org !
-
-
-# 6. Pick an issue.
-
-Fix your favorite problem or perhaps find a [Good First Issue](https://github.com/matrix-org/synapse/issues?q=is%3Aopen+is%3Aissue+label%3A%22Good+First+Issue%22)
-to work on.
-
-
-# 7. Turn coffee and documentation into code and documentation!
+## Code style
 
 Synapse's code style is documented [here](docs/code_style.md). Please follow
 it, including the conventions for the [sample configuration
 file](docs/code_style.md#configuration-file-format).
 
-There is a growing amount of documentation located in the [docs](docs)
-directory. This documentation is intended primarily for sysadmins running their
-own Synapse instance, as well as developers interacting externally with
-Synapse. [docs/dev](docs/dev) exists primarily to house documentation for
-Synapse developers. [docs/admin_api](docs/admin_api) houses documentation
-regarding Synapse's Admin API, which is used mostly by sysadmins and external
-service developers.
+Many of the conventions are enforced by scripts which are run as part of the
+[continuous integration system](#continuous-integration-and-testing). To help
+check if you have followed the code style, you can run `scripts-dev/lint.sh`
+locally. You'll need python 3.6 or later, and to install a number of tools:
 
-If you add new files added to either of these folders, please use [GitHub-Flavoured
-Markdown](https://guides.github.com/features/mastering-markdown/).
+```
+# Install the dependencies
+pip install -e ".[lint,mypy]"
 
-Some documentation also exists in [Synapse's GitHub
-Wiki](https://github.com/matrix-org/synapse/wiki), although this is primarily
-contributed to by community authors.
-
-
-# 8. Test, test, test!
-<a name="test-test-test"></a>
-
-While you're developing and before submitting a patch, you'll
-want to test your code.
-
-## Run the linters.
-
-The linters look at your code and do two things:
-
-- ensure that your code follows the coding style adopted by the project;
-- catch a number of errors in your code.
-
-They're pretty fast, don't hesitate!
-
-```sh
-source ./env/bin/activate
+# Run the linter script
 ./scripts-dev/lint.sh
 ```
 
-Note that this script *will modify your files* to fix styling errors.
-Make sure that you have saved all your files.
+**Note that the script does not just test/check, but also reformats code, so you
+may wish to ensure any new code is committed first**.
 
-If you wish to restrict the linters to only the files changed since the last commit
-(much faster!), you can instead run:
+By default, this script checks all files and can take some time; if you alter
+only certain files, you might wish to specify paths as arguments to reduce the
+run-time:
 
-```sh
-source ./env/bin/activate
-./scripts-dev/lint.sh -d
 ```
-
-Or if you know exactly which files you wish to lint, you can instead run:
-
-```sh
-source ./env/bin/activate
 ./scripts-dev/lint.sh path/to/file1.py path/to/file2.py path/to/folder
 ```
 
-## Run the unit tests.
+You can also provide the `-d` option, which will lint the files that have been
+changed since the last git commit. This will often be significantly faster than
+linting the whole codebase.
 
-The unit tests run parts of Synapse, including your changes, to see if anything
-was broken. They are slower than the linters but will typically catch more errors.
-
-```sh
-source ./env/bin/activate
-trial tests
-```
-
-If you wish to only run *some* unit tests, you may specify
-another module instead of `tests` - or a test class or a method:
-
-```sh
-source ./env/bin/activate
-trial tests.rest.admin.test_room tests.handlers.test_admin.ExfiltrateData.test_invite
-```
-
-If your tests fail, you may wish to look at the logs:
-
-```sh
-less _trial_temp/test.log
-```
-
-## Run the integration tests.
-
-The integration tests are a more comprehensive suite of tests. They
-run a full version of Synapse, including your changes, to check if
-anything was broken. They are slower than the unit tests but will
-typically catch more errors.
-
-The following command will let you run the integration test with the most common
-configuration:
-
-```sh
-$ docker run --rm -it -v /path/where/you/have/cloned/the/repository\:/src:ro -v /path/to/where/you/want/logs\:/logs matrixdotorg/sytest-synapse:py37
-```
-
-This configuration should generally cover  your needs. For more details about other configurations, see [documentation in the SyTest repo](https://github.com/matrix-org/sytest/blob/develop/docker/README.md).
-
-
-# 9. Submit your patch.
-
-Once you're happy with your patch, it's time to prepare a Pull Request.
-
-To prepare a Pull Request, please:
-
-1. verify that [all the tests pass](#test-test-test), including the coding style;
-2. [sign off](#sign-off) your contribution;
-3. `git push` your commit to your fork of Synapse;
-4. on GitHub, [create the Pull Request](https://docs.github.com/en/github/collaborating-with-issues-and-pull-requests/creating-a-pull-request);
-5. add a [changelog entry](#changelog) and push it to your Pull Request;
-6. for most contributors, that's all - however, if you are a member of the organization `matrix-org`, on GitHub, please request a review from `matrix.org / Synapse Core`.
+Before pushing new changes, ensure they don't produce linting errors. Commit any
+files that were corrected.
 
+Please ensure your changes match the cosmetic style of the existing project,
+and **never** mix cosmetic and functional changes in the same commit, as it
+makes it horribly hard to review otherwise.
 
 ## Changelog
 
@@ -292,6 +156,24 @@ directory, you will need both a regular newsfragment *and* an entry in the
 debian changelog. (Though typically such changes should be submitted as two
 separate pull requests.)
 
+## Documentation
+
+There is a growing amount of documentation located in the [docs](docs)
+directory. This documentation is intended primarily for sysadmins running their
+own Synapse instance, as well as developers interacting externally with
+Synapse. [docs/dev](docs/dev) exists primarily to house documentation for
+Synapse developers. [docs/admin_api](docs/admin_api) houses documentation
+regarding Synapse's Admin API, which is used mostly by sysadmins and external
+service developers.
+
+New files added to both folders should be written in [Github-Flavoured
+Markdown](https://guides.github.com/features/mastering-markdown/), and attempts
+should be made to migrate existing documents to markdown where possible.
+
+Some documentation also exists in [Synapse's Github
+Wiki](https://github.com/matrix-org/synapse/wiki), although this is primarily
+contributed to by community authors.
+
 ## Sign off
 
 In order to have a concrete record that your contribution is intentional
@@ -358,36 +240,47 @@ Git allows you to add this signoff automatically when using the `-s`
 flag to `git commit`, which uses the name and email set in your
 `user.name` and `user.email` git configs.
 
+## Continuous integration and testing
 
-# 10. Turn feedback into better code.
+[Buildkite](https://buildkite.com/matrix-dot-org/synapse) will automatically
+run a series of checks and tests against any PR which is opened against the
+project; if your change breaks the build, this will be shown in GitHub, with
+links to the build results. If your build fails, please try to fix the errors
+and update your branch.
 
-Once the Pull Request is opened, you will see a few things:
+To run unit tests in a local development environment, you can use:
 
-1. our automated CI (Continuous Integration) pipeline will run (again) the linters, the unit tests, the integration tests and more;
-2. one or more of the developers will take a look at your Pull Request and offer feedback.
+- ``tox -e py35`` (requires tox to be installed by ``pip install tox``)
+  for SQLite-backed Synapse on Python 3.5.
+- ``tox -e py36`` for SQLite-backed Synapse on Python 3.6.
+- ``tox -e py36-postgres`` for PostgreSQL-backed Synapse on Python 3.6
+  (requires a running local PostgreSQL with access to create databases).
+- ``./test_postgresql.sh`` for PostgreSQL-backed Synapse on Python 3.5
+  (requires Docker). Entirely self-contained, recommended if you don't want to
+  set up PostgreSQL yourself.
 
-From this point, you should:
+Docker images are available for running the integration tests (SyTest) locally,
+see the [documentation in the SyTest repo](
+https://github.com/matrix-org/sytest/blob/develop/docker/README.md) for more
+information.
 
-1. Look at the results of the CI pipeline.
-   - If there is any error, fix the error.
-2. If a developer has requested changes, make these changes and let us know if it is ready for a developer to review again.
-3. Create a new commit with the changes.
-   - Please do NOT overwrite the history. New commits make the reviewer's life easier.
-   - Push this commits to your Pull Request.
-4. Back to 1.
+## Updating your pull request
 
-Once both the CI and the developers are happy, the patch will be merged into Synapse and released shortly!
+If you decide to make changes to your pull request - perhaps to address issues
+raised in a review, or to fix problems highlighted by [continuous
+integration](#continuous-integration-and-testing) - just add new commits to your
+branch, and push to GitHub. The pull request will automatically be updated.
 
-# 11. Find a new issue.
+Please **avoid** rebasing your branch, especially once the PR has been
+reviewed: doing so makes it very difficult for a reviewer to see what has
+changed since a previous review.
 
-By now, you know the drill!
-
-# Notes for maintainers on merging PRs etc
+## Notes for maintainers on merging PRs etc
 
 There are some notes for those with commit access to the project on how we
 manage git [here](docs/dev/git.md).
 
-# Conclusion
+## Conclusion
 
 That's it! Matrix is a very open and collaborative project as you might expect
 given our obsession with open communication. If we're going to successfully

INSTALL.md

@@ -1,44 +1,19 @@
-# Installation Instructions
+- [Choosing your server name](#choosing-your-server-name)
+- [Picking a database engine](#picking-a-database-engine)
+- [Installing Synapse](#installing-synapse)
+  - [Installing from source](#installing-from-source)
+    - [Platform-Specific Instructions](#platform-specific-instructions)
+  - [Prebuilt packages](#prebuilt-packages)
+- [Setting up Synapse](#setting-up-synapse)
+  - [TLS certificates](#tls-certificates)
+  - [Client Well-Known URI](#client-well-known-uri)
+  - [Email](#email)
+  - [Registering a user](#registering-a-user)
+  - [Setting up a TURN server](#setting-up-a-turn-server)
+  - [URL previews](#url-previews)
+- [Troubleshooting Installation](#troubleshooting-installation)
 
-There are 3 steps to follow under **Installation Instructions**.
-
-- [Installation Instructions](#installation-instructions)
-  - [Choosing your server name](#choosing-your-server-name)
-  - [Installing Synapse](#installing-synapse)
-    - [Installing from source](#installing-from-source)
-      - [Platform-Specific Instructions](#platform-specific-instructions)
-        - [Debian/Ubuntu/Raspbian](#debianubunturaspbian)
-        - [ArchLinux](#archlinux)
-        - [CentOS/Fedora](#centosfedora)
-        - [macOS](#macos)
-        - [OpenSUSE](#opensuse)
-        - [OpenBSD](#openbsd)
-        - [Windows](#windows)
-    - [Prebuilt packages](#prebuilt-packages)
-      - [Docker images and Ansible playbooks](#docker-images-and-ansible-playbooks)
-      - [Debian/Ubuntu](#debianubuntu)
-        - [Matrix.org packages](#matrixorg-packages)
-        - [Downstream Debian packages](#downstream-debian-packages)
-        - [Downstream Ubuntu packages](#downstream-ubuntu-packages)
-      - [Fedora](#fedora)
-      - [OpenSUSE](#opensuse-1)
-      - [SUSE Linux Enterprise Server](#suse-linux-enterprise-server)
-      - [ArchLinux](#archlinux-1)
-      - [Void Linux](#void-linux)
-      - [FreeBSD](#freebsd)
-      - [OpenBSD](#openbsd-1)
-      - [NixOS](#nixos)
-  - [Setting up Synapse](#setting-up-synapse)
-    - [Using PostgreSQL](#using-postgresql)
-    - [TLS certificates](#tls-certificates)
-    - [Client Well-Known URI](#client-well-known-uri)
-    - [Email](#email)
-    - [Registering a user](#registering-a-user)
-    - [Setting up a TURN server](#setting-up-a-turn-server)
-    - [URL previews](#url-previews)
-    - [Troubleshooting Installation](#troubleshooting-installation)
-
-## Choosing your server name
+# Choosing your server name
 
 It is important to choose the name for your server before you install Synapse,
 because it cannot be changed later.
@@ -54,9 +29,28 @@ that your email address is probably `user@example.com` rather than
 `user@email.example.com`) - but doing so may require more advanced setup: see
 [Setting up Federation](docs/federate.md).
 
-## Installing Synapse
+# Picking a database engine
 
-### Installing from source
+Synapse offers two database engines:
+ * [PostgreSQL](https://www.postgresql.org)
+ * [SQLite](https://sqlite.org/)
+
+Almost all installations should opt to use PostgreSQL. Advantages include:
+
+* significant performance improvements due to the superior threading and
+  caching model, smarter query optimiser
+* allowing the DB to be run on separate hardware
+
+For information on how to install and use PostgreSQL, please see
+[docs/postgres.md](docs/postgres.md)
+
+By default Synapse uses SQLite and in doing so trades performance for convenience.
+SQLite is only recommended in Synapse for testing purposes or for servers with
+light workloads.
+
+# Installing Synapse
+
+## Installing from source
 
 (Prebuilt packages are available for some platforms - see [Prebuilt packages](#prebuilt-packages).)
 
@@ -74,7 +68,7 @@ these on various platforms.
 
 To install the Synapse homeserver run:
 
-```sh
+```
 mkdir -p ~/synapse
 virtualenv -p python3 ~/synapse/env
 source ~/synapse/env/bin/activate
@@ -91,7 +85,7 @@ prefer.
 This Synapse installation can then be later upgraded by using pip again with the
 update flag:
 
-```sh
+```
 source ~/synapse/env/bin/activate
 pip install -U matrix-synapse
 ```
@@ -99,7 +93,7 @@ pip install -U matrix-synapse
 Before you can start Synapse, you will need to generate a configuration
 file. To do this, run (in your virtualenv, as before):
 
-```sh
+```
 cd ~/synapse
 python -m synapse.app.homeserver \
     --server-name my.domain.name \
@@ -117,54 +111,70 @@ wise to back them up somewhere safe. (If, for whatever reason, you do need to
 change your homeserver's keys, you may find that other homeserver have the
 old key cached. If you update the signing key, you should change the name of the
 key in the `<server name>.signing.key` file (the second word) to something
-different. See the [spec](https://matrix.org/docs/spec/server_server/latest.html#retrieving-server-keys) for more information on key management).
+different. See the
+[spec](https://matrix.org/docs/spec/server_server/latest.html#retrieving-server-keys)
+for more information on key management).
 
 To actually run your new homeserver, pick a working directory for Synapse to
 run (e.g. `~/synapse`), and:
 
-```sh
+```
 cd ~/synapse
 source env/bin/activate
 synctl start
 ```
 
-#### Platform-Specific Instructions
+### Platform-Specific Instructions
 
-##### Debian/Ubuntu/Raspbian
+#### Debian/Ubuntu/Raspbian
 
 Installing prerequisites on Ubuntu or Debian:
 
-```sh
-sudo apt install build-essential python3-dev libffi-dev \
+```
+sudo apt-get install build-essential python3-dev libffi-dev \
                      python3-pip python3-setuptools sqlite3 \
                      libssl-dev virtualenv libjpeg-dev libxslt1-dev
 ```
 
-##### ArchLinux
+#### ArchLinux
 
 Installing prerequisites on ArchLinux:
 
-```sh
+```
 sudo pacman -S base-devel python python-pip \
                python-setuptools python-virtualenv sqlite3
 ```
 
-##### CentOS/Fedora
+#### CentOS/Fedora
 
-Installing prerequisites on CentOS or Fedora Linux:
+Installing prerequisites on CentOS 8 or Fedora>26:
 
-```sh
+```
 sudo dnf install libtiff-devel libjpeg-devel libzip-devel freetype-devel \
-                 libwebp-devel libxml2-devel libxslt-devel libpq-devel \
-                 python3-virtualenv libffi-devel openssl-devel python3-devel
+                 libwebp-devel tk-devel redhat-rpm-config \
+                 python3-virtualenv libffi-devel openssl-devel
 sudo dnf groupinstall "Development Tools"
 ```
 
-##### macOS
+Installing prerequisites on CentOS 7 or Fedora<=25:
+
+```
+sudo yum install libtiff-devel libjpeg-devel libzip-devel freetype-devel \
+                 lcms2-devel libwebp-devel tcl-devel tk-devel redhat-rpm-config \
+                 python3-virtualenv libffi-devel openssl-devel
+sudo yum groupinstall "Development Tools"
+```
+
+Note that Synapse does not support versions of SQLite before 3.11, and CentOS 7
+uses SQLite 3.7. You may be able to work around this by installing a more
+recent SQLite version, but it is recommended that you instead use a Postgres
+database: see [docs/postgres.md](docs/postgres.md).
+
+#### macOS
 
 Installing prerequisites on macOS:
 
-```sh
+```
 xcode-select --install
 sudo easy_install pip
 sudo pip install virtualenv
@@ -174,23 +184,22 @@ brew install pkg-config libffi
 On macOS Catalina (10.15) you may need to explicitly install OpenSSL
 via brew and inform `pip` about it so that `psycopg2` builds:
 
-```sh
+```
 brew install openssl@1.1
-export LDFLAGS="-L/usr/local/opt/openssl/lib"
-export CPPFLAGS="-I/usr/local/opt/openssl/include"
+export LDFLAGS=-L/usr/local/Cellar/openssl\@1.1/1.1.1d/lib/
 ```
 
-##### OpenSUSE
+#### OpenSUSE
 
 Installing prerequisites on openSUSE:
 
-```sh
+```
 sudo zypper in -t pattern devel_basis
 sudo zypper in python-pip python-setuptools sqlite3 python-virtualenv \
                python-devel libffi-devel libopenssl-devel libjpeg62-devel
 ```
 
-##### OpenBSD
+#### OpenBSD
 
 A port of Synapse is available under `net/synapse`. The filesystem
 underlying the homeserver directory (defaults to `/var/synapse`) has to be
@@ -204,72 +213,73 @@ mounted with `wxallowed` (cf. `mount(8)`).
 Creating a `WRKOBJDIR` for building python under `/usr/local` (which on a
 default OpenBSD installation is mounted with `wxallowed`):
 
-```sh
+```
 doas mkdir /usr/local/pobj_wxallowed
 ```
 
 Assuming `PORTS_PRIVSEP=Yes` (cf. `bsd.port.mk(5)`) and `SUDO=doas` are
 configured in `/etc/mk.conf`:
 
-```sh
+```
 doas chown _pbuild:_pbuild /usr/local/pobj_wxallowed
 ```
 
 Setting the `WRKOBJDIR` for building python:
 
-```sh
+```
 echo WRKOBJDIR_lang/python/3.7=/usr/local/pobj_wxallowed  \\nWRKOBJDIR_lang/python/2.7=/usr/local/pobj_wxallowed >> /etc/mk.conf
 ```
 
 Building Synapse:
 
-```sh
+```
 cd /usr/ports/net/synapse
 make install
 ```
 
-##### Windows
+#### Windows
 
 If you wish to run or develop Synapse on Windows, the Windows Subsystem For
 Linux provides a Linux environment on Windows 10 which is capable of using the
 Debian, Fedora, or source installation methods. More information about WSL can
-be found at <https://docs.microsoft.com/en-us/windows/wsl/install-win10> for
-Windows 10 and <https://docs.microsoft.com/en-us/windows/wsl/install-on-server>
+be found at https://docs.microsoft.com/en-us/windows/wsl/install-win10 for
+Windows 10 and https://docs.microsoft.com/en-us/windows/wsl/install-on-server
 for Windows Server.
 
-### Prebuilt packages
+## Prebuilt packages
 
 As an alternative to installing from source, prebuilt packages are available
 for a number of platforms.
 
-#### Docker images and Ansible playbooks
+### Docker images and Ansible playbooks
 
-There is an official synapse image available at
-<https://hub.docker.com/r/matrixdotorg/synapse> which can be used with
+There is an offical synapse image available at
+https://hub.docker.com/r/matrixdotorg/synapse which can be used with
 the docker-compose file available at [contrib/docker](contrib/docker). Further
 information on this including configuration options is available in the README
 on hub.docker.com.
 
 Alternatively, Andreas Peters (previously Silvio Fricke) has contributed a
 Dockerfile to automate a synapse server in a single Docker image, at
-<https://hub.docker.com/r/avhost/docker-matrix/tags/>
+https://hub.docker.com/r/avhost/docker-matrix/tags/
 
 Slavi Pantaleev has created an Ansible playbook,
 which installs the offical Docker image of Matrix Synapse
 along with many other Matrix-related services (Postgres database, Element, coturn,
 ma1sd, SSL support, etc.).
 For more details, see
-<https://github.com/spantaleev/matrix-docker-ansible-deploy>
+https://github.com/spantaleev/matrix-docker-ansible-deploy
 
-#### Debian/Ubuntu
 
-##### Matrix.org packages
+### Debian/Ubuntu
+
+#### Matrix.org packages
 
 Matrix.org provides Debian/Ubuntu packages of the latest stable version of
-Synapse via <https://packages.matrix.org/debian/>. They are available for Debian
+Synapse via https://packages.matrix.org/debian/. They are available for Debian
 9 (Stretch), Ubuntu 16.04 (Xenial), and later. To use them:
 
-```sh
+```
 sudo apt install -y lsb-release wget apt-transport-https
 sudo wget -O /usr/share/keyrings/matrix-org-archive-keyring.gpg https://packages.matrix.org/debian/matrix-org-archive-keyring.gpg
 echo "deb [signed-by=/usr/share/keyrings/matrix-org-archive-keyring.gpg] https://packages.matrix.org/debian/ $(lsb_release -cs) main" |
@@ -289,7 +299,7 @@ The fingerprint of the repository signing key (as shown by `gpg
 /usr/share/keyrings/matrix-org-archive-keyring.gpg`) is
 `AAF9AE843A7584B5A3E4CD2BCF45A512DE2DA058`.
 
-##### Downstream Debian packages
+#### Downstream Debian packages
 
 We do not recommend using the packages from the default Debian `buster`
 repository at this time, as they are old and suffer from known security
@@ -301,49 +311,49 @@ for information on how to use backports.
 If you are using Debian `sid` or testing, Synapse is available in the default
 repositories and it should be possible to install it simply with:
 
-```sh
+```
 sudo apt install matrix-synapse
 ```
 
-##### Downstream Ubuntu packages
+#### Downstream Ubuntu packages
 
 We do not recommend using the packages in the default Ubuntu repository
 at this time, as they are old and suffer from known security vulnerabilities.
 The latest version of Synapse can be installed from [our repository](#matrixorg-packages).
 
-#### Fedora
+### Fedora
 
 Synapse is in the Fedora repositories as `matrix-synapse`:
 
-```sh
+```
 sudo dnf install matrix-synapse
 ```
 
 Oleg Girko provides Fedora RPMs at
-<https://obs.infoserver.lv/project/monitor/matrix-synapse>
+https://obs.infoserver.lv/project/monitor/matrix-synapse
 
-#### OpenSUSE
+### OpenSUSE
 
 Synapse is in the OpenSUSE repositories as `matrix-synapse`:
 
-```sh
+```
 sudo zypper install matrix-synapse
 ```
 
-#### SUSE Linux Enterprise Server
+### SUSE Linux Enterprise Server
 
 Unofficial package are built for SLES 15 in the openSUSE:Backports:SLE-15 repository at
-<https://download.opensuse.org/repositories/openSUSE:/Backports:/SLE-15/standard/>
+https://download.opensuse.org/repositories/openSUSE:/Backports:/SLE-15/standard/
 
-#### ArchLinux
+### ArchLinux
 
 The quickest way to get up and running with ArchLinux is probably with the community package
-<https://www.archlinux.org/packages/community/any/matrix-synapse/>, which should pull in most of
+https://www.archlinux.org/packages/community/any/matrix-synapse/, which should pull in most of
 the necessary dependencies.
 
 pip may be outdated (6.0.7-1 and needs to be upgraded to 6.0.8-1 ):
 
-```sh
+```
 sudo pip install --upgrade pip
 ```
 
@@ -352,28 +362,28 @@ ELFCLASS32 (x64 Systems), you may need to reinstall py-bcrypt to correctly
 compile it under the right architecture. (This should not be needed if
 installing under virtualenv):
 
-```sh
+```
 sudo pip uninstall py-bcrypt
 sudo pip install py-bcrypt
 ```
 
-#### Void Linux
+### Void Linux
 
 Synapse can be found in the void repositories as 'synapse':
 
-```sh
+```
 xbps-install -Su
 xbps-install -S synapse
 ```
 
-#### FreeBSD
+### FreeBSD
 
 Synapse can be installed via FreeBSD Ports or Packages contributed by Brendan Molloy from:
 
-- Ports: `cd /usr/ports/net-im/py-matrix-synapse && make install clean`
-- Packages: `pkg install py37-matrix-synapse`
+ - Ports: `cd /usr/ports/net-im/py-matrix-synapse && make install clean`
+ - Packages: `pkg install py37-matrix-synapse`
 
-#### OpenBSD
+### OpenBSD
 
 As of OpenBSD 6.7 Synapse is available as a pre-compiled binary. The filesystem
 underlying the homeserver directory (defaults to `/var/synapse`) has to be
@@ -382,35 +392,20 @@ and mounting it to `/var/synapse` should be taken into consideration.
 
 Installing Synapse:
 
-```sh
+```
 doas pkg_add synapse
 ```
 
-#### NixOS
+### NixOS
 
 Robin Lambertz has packaged Synapse for NixOS at:
-<https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/matrix-synapse.nix>
+https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/matrix-synapse.nix
 
-## Setting up Synapse
+# Setting up Synapse
 
 Once you have installed synapse as above, you will need to configure it.
 
-### Using PostgreSQL
-
-By default Synapse uses [SQLite](https://sqlite.org/) and in doing so trades performance for convenience.
-SQLite is only recommended in Synapse for testing purposes or for servers with
-very light workloads.
-
-Almost all installations should opt to use [PostgreSQL](https://www.postgresql.org). Advantages include:
-
-- significant performance improvements due to the superior threading and
-  caching model, smarter query optimiser
-- allowing the DB to be run on separate hardware
-
-For information on how to install and use PostgreSQL in Synapse, please see
-[docs/postgres.md](docs/postgres.md)
-
-### TLS certificates
+## TLS certificates
 
 The default configuration exposes a single HTTP port on the local
 interface: `http://localhost:8008`. It is suitable for local testing,
@@ -424,19 +419,19 @@ The recommended way to do so is to set up a reverse proxy on port
 Alternatively, you can configure Synapse to expose an HTTPS port. To do
 so, you will need to edit `homeserver.yaml`, as follows:
 
-- First, under the `listeners` section, uncomment the configuration for the
+* First, under the `listeners` section, uncomment the configuration for the
   TLS-enabled listener. (Remove the hash sign (`#`) at the start of
   each line). The relevant lines are like this:
 
-```yaml
-  - port: 8448
-    type: http
-    tls: true
-    resources:
-      - names: [client, federation]
+  ```
+    - port: 8448
+      type: http
+      tls: true
+      resources:
+        - names: [client, federation]
   ```
 
-- You will also need to uncomment the `tls_certificate_path` and
+* You will also need to uncomment the `tls_certificate_path` and
   `tls_private_key_path` lines under the `TLS` section. You will need to manage
   provisioning of these certificates yourself — Synapse had built-in ACME
   support, but the ACMEv1 protocol Synapse implements is deprecated, not
@@ -451,7 +446,7 @@ so, you will need to edit `homeserver.yaml`, as follows:
 For a more detailed guide to configuring your server for federation, see
 [federate.md](docs/federate.md).
 
-### Client Well-Known URI
+## Client Well-Known URI
 
 Setting up the client Well-Known URI is optional but if you set it up, it will
 allow users to enter their full username (e.g. `@user:<server_name>`) into clients
@@ -462,7 +457,7 @@ about the actual homeserver URL you are using.
 The URL `https://<server_name>/.well-known/matrix/client` should return JSON in
 the following format.
 
-```json
+```
 {
   "m.homeserver": {
     "base_url": "https://<matrix.example.com>"
@@ -472,7 +467,7 @@ the following format.
 
 It can optionally contain identity server information as well.
 
-```json
+```
 {
   "m.homeserver": {
     "base_url": "https://<matrix.example.com>"
@@ -489,11 +484,10 @@ Cross-Origin Resource Sharing (CORS) headers. A recommended value would be
 view it.
 
 In nginx this would be something like:
-
-```nginx
+```
 location /.well-known/matrix/client {
     return 200 '{"m.homeserver": {"base_url": "https://<matrix.example.com>"}}';
-    default_type application/json;
+    add_header Content-Type application/json;
     add_header Access-Control-Allow-Origin *;
 }
 ```
@@ -503,11 +497,11 @@ correctly. `public_baseurl` should be set to the URL that clients will use to
 connect to your server. This is the same URL you put for the `m.homeserver`
 `base_url` above.
 
-```yaml
+```
 public_baseurl: "https://<matrix.example.com>"
 ```
 
-### Email
+## Email
 
 It is desirable for Synapse to have the capability to send email. This allows
 Synapse to send password reset emails, send verifications when an email address
@@ -522,7 +516,7 @@ and `notif_from` fields filled out.  You may also need to set `smtp_user`,
 If email is not configured, password reset, registration and notifications via
 email will be disabled.
 
-### Registering a user
+## Registering a user
 
 The easiest way to create a new user is to do so from a client like [Element](https://element.io/).
 
@@ -530,7 +524,7 @@ Alternatively you can do so from the command line if you have installed via pip.
 
 This can be done as follows:
 
-```sh
+```
 $ source ~/synapse/env/bin/activate
 $ synctl start # if not already running
 $ register_new_matrix_user -c homeserver.yaml http://localhost:8008
@@ -548,12 +542,12 @@ value is generated by `--generate-config`), but it should be kept secret, as
 anyone with knowledge of it can register users, including admin accounts,
 on your server even if `enable_registration` is `false`.
 
-### Setting up a TURN server
+## Setting up a TURN server
 
 For reliable VoIP calls to be routed via this homeserver, you MUST configure
 a TURN server. See [docs/turn-howto.md](docs/turn-howto.md) for details.
 
-### URL previews
+## URL previews
 
 Synapse includes support for previewing URLs, which is disabled by default.  To
 turn it on you must enable the `url_preview_enabled: True` config parameter
@@ -563,18 +557,19 @@ This is critical from a security perspective to stop arbitrary Matrix users
 spidering 'internal' URLs on your network. At the very least we recommend that
 your loopback and RFC1918 IP addresses are blacklisted.
 
-This also requires the optional `lxml` python dependency to be  installed. This
-in turn requires the `libxml2` library to be available - on  Debian/Ubuntu this
-means `apt-get install libxml2-dev`, or equivalent for your OS.
+This also requires the optional `lxml` and `netaddr` python dependencies to be
+installed. This in turn requires the `libxml2` library to be available - on
+Debian/Ubuntu this means `apt-get install libxml2-dev`, or equivalent for
+your OS.
 
-### Troubleshooting Installation
+# Troubleshooting Installation
 
 `pip` seems to leak *lots* of memory during installation. For instance, a Linux
 host with 512MB of RAM may run out of memory whilst installing Twisted. If this
 happens, you will have to individually install the dependencies which are
 failing, e.g.:
 
-```sh
+```
 pip install twisted
 ```
 

README.rst

@@ -243,8 +243,6 @@ Then update the ``users`` table in the database::
 Synapse Development
 ===================
 
-Join our developer community on Matrix: `#synapse-dev:matrix.org <https://matrix.to/#/#synapse-dev:matrix.org>`_
-
 Before setting up a development environment for synapse, make sure you have the
 system dependencies (such as the python header files) installed - see
 `Installing from source <INSTALL.md#installing-from-source>`_.
@@ -263,43 +261,18 @@ to install using pip and a virtualenv::
     pip install -e ".[all,test]"
 
 This will run a process of downloading and installing all the needed
-dependencies into a virtual env. If any dependencies fail to install,
-try installing the failing modules individually::
+dependencies into a virtual env.
 
-    pip install -e "module-name"
-
-Once this is done, you may wish to run Synapse's unit tests to
-check that everything is installed correctly::
+Once this is done, you may wish to run Synapse's unit tests, to
+check that everything is installed as it should be::
 
     python -m twisted.trial tests
 
-This should end with a 'PASSED' result (note that exact numbers will
-differ)::
-
-    Ran 1337 tests in 716.064s
-
-    PASSED (skips=15, successes=1322)
-
-We recommend using the demo which starts 3 federated instances running on ports `8080` - `8082`
-
-    ./demo/start.sh
-
-(to stop, you can use `./demo/stop.sh`)
-
-If you just want to start a single instance of the app and run it directly::
-
-    # Create the homeserver.yaml config once
-    python -m synapse.app.homeserver \
-      --server-name my.domain.name \
-      --config-path homeserver.yaml \
-      --generate-config \
-      --report-stats=[yes|no]
-
-    # Start the app
-    python -m synapse.app.homeserver --config-path homeserver.yaml
-
+This should end with a 'PASSED' result::
 
+    Ran 1266 tests in 643.930s
 
+    PASSED (skips=15, successes=1251)
 
 Running the Integration Tests
 =============================

UPGRADE.rst

@@ -5,16 +5,6 @@ Before upgrading check if any special steps are required to upgrade from the
 version you currently have installed to the current version of Synapse. The extra
 instructions that may be required are listed later in this document.
 
-* Check that your versions of Python and PostgreSQL are still supported.
-
-  Synapse follows upstream lifecycles for `Python`_ and `PostgreSQL`_, and
-  removes support for versions which are no longer maintained.
-
-  The website https://endoflife.date also offers convenient summaries.
-
-  .. _Python: https://devguide.python.org/devcycle/#end-of-life-branches
-  .. _PostgreSQL: https://www.postgresql.org/support/versioning/
-
 * If Synapse was installed using `prebuilt packages
   <INSTALL.md#prebuilt-packages>`_, you will need to follow the normal process
   for upgrading those packages.
@@ -85,214 +75,6 @@ for example:
      wget https://packages.matrix.org/debian/pool/main/m/matrix-synapse-py3/matrix-synapse-py3_1.3.0+stretch1_amd64.deb
      dpkg -i matrix-synapse-py3_1.3.0+stretch1_amd64.deb
 
-Upgrading to v1.29.0
-====================
-
-Requirement for X-Forwarded-Proto header
-----------------------------------------
-
-When using Synapse with a reverse proxy (in particular, when using the
-`x_forwarded` option on an HTTP listener), Synapse now expects to receive an
-`X-Forwarded-Proto` header on incoming HTTP requests. If it is not set, Synapse
-will log a warning on each received request.
-
-To avoid the warning, administrators using a reverse proxy should ensure that
-the reverse proxy sets `X-Forwarded-Proto` header to `https` or `http` to
-indicate the protocol used by the client. See the [reverse proxy
-documentation](docs/reverse_proxy.md), where the example configurations have
-been updated to show how to set this header.
-
-(Users of `Caddy <https://caddyserver.com/>`_ are unaffected, since we believe it
-sets `X-Forwarded-Proto` by default.)
-
-Upgrading to v1.27.0
-====================
-
-Changes to callback URI for OAuth2 / OpenID Connect and SAML2
--------------------------------------------------------------
-
-This version changes the URI used for callbacks from OAuth2 and SAML2 identity providers:
-
-* If your server is configured for single sign-on via an OpenID Connect or OAuth2 identity
-  provider, you will need to add ``[synapse public baseurl]/_synapse/client/oidc/callback``
-  to the list of permitted "redirect URIs" at the identity provider.
-
-  See `docs/openid.md <docs/openid.md>`_ for more information on setting up OpenID
-  Connect.
-
-* If your server is configured for single sign-on via a SAML2 identity provider, you will
-  need to add ``[synapse public baseurl]/_synapse/client/saml2/authn_response`` as a permitted
-  "ACS location" (also known as "allowed callback URLs") at the identity provider.
-
-Changes to HTML templates
--------------------------
-
-The HTML templates for SSO and email notifications now have `Jinja2's autoescape <https://jinja.palletsprojects.com/en/2.11.x/api/#autoescaping>`_
-enabled for files ending in ``.html``, ``.htm``, and ``.xml``. If you have customised
-these templates and see issues when viewing them you might need to update them.
-It is expected that most configurations will need no changes.
-
-If you have customised the templates *names* for these templates, it is recommended
-to verify they end in ``.html`` to ensure autoescape is enabled.
-
-The above applies to the following templates:
-
-* ``add_threepid.html``
-* ``add_threepid_failure.html``
-* ``add_threepid_success.html``
-* ``notice_expiry.html``
-* ``notice_expiry.html``
-* ``notif_mail.html`` (which, by default, includes ``room.html`` and ``notif.html``)
-* ``password_reset.html``
-* ``password_reset_confirmation.html``
-* ``password_reset_failure.html``
-* ``password_reset_success.html``
-* ``registration.html``
-* ``registration_failure.html``
-* ``registration_success.html``
-* ``sso_account_deactivated.html``
-* ``sso_auth_bad_user.html``
-* ``sso_auth_confirm.html``
-* ``sso_auth_success.html``
-* ``sso_error.html``
-* ``sso_login_idp_picker.html``
-* ``sso_redirect_confirm.html``
-
-Upgrading to v1.26.0
-====================
-
-Rolling back to v1.25.0 after a failed upgrade
-----------------------------------------------
-
-v1.26.0 includes a lot of large changes. If something problematic occurs, you
-may want to roll-back to a previous version of Synapse. Because v1.26.0 also
-includes a new database schema version, reverting that version is also required
-alongside the generic rollback instructions mentioned above. In short, to roll
-back to v1.25.0 you need to:
-
-1. Stop the server
-2. Decrease the schema version in the database:
-
-   .. code:: sql
-
-      UPDATE schema_version SET version = 58;
-
-3. Delete the ignored users & chain cover data:
-
-   .. code:: sql
-
-      DROP TABLE IF EXISTS ignored_users;
-      UPDATE rooms SET has_auth_chain_index = false;
-
-   For PostgreSQL run:
-
-   .. code:: sql
-
-      TRUNCATE event_auth_chain_links;
-      TRUNCATE event_auth_chains;
-
-   For SQLite run:
-
-   .. code:: sql
-
-      DELETE FROM event_auth_chain_links;
-      DELETE FROM event_auth_chains;
-
-4. Mark the deltas as not run (so they will re-run on upgrade).
-
-   .. code:: sql
-
-      DELETE FROM applied_schema_deltas WHERE version = 59 AND file = "59/01ignored_user.py";
-      DELETE FROM applied_schema_deltas WHERE version = 59 AND file = "59/06chain_cover_index.sql";
-
-5. Downgrade Synapse by following the instructions for your installation method
-   in the "Rolling back to older versions" section above.
-
-Upgrading to v1.25.0
-====================
-
-Last release supporting Python 3.5
-----------------------------------
-
-This is the last release of Synapse which guarantees support with Python 3.5,
-which passed its upstream End of Life date several months ago.
-
-We will attempt to maintain support through March 2021, but without guarantees.
-
-In the future, Synapse will follow upstream schedules for ending support of
-older versions of Python and PostgreSQL. Please upgrade to at least Python 3.6
-and PostgreSQL 9.6 as soon as possible.
-
-Blacklisting IP ranges
-----------------------
-
-Synapse v1.25.0 includes new settings, ``ip_range_blacklist`` and
-``ip_range_whitelist``, for controlling outgoing requests from Synapse for federation,
-identity servers, push, and for checking key validity for third-party invite events.
-The previous setting, ``federation_ip_range_blacklist``, is deprecated. The new
-``ip_range_blacklist`` defaults to private IP ranges if it is not defined.
-
-If you have never customised ``federation_ip_range_blacklist`` it is recommended
-that you remove that setting.
-
-If you have customised ``federation_ip_range_blacklist`` you should update the
-setting name to ``ip_range_blacklist``.
-
-If you have a custom push server that is reached via private IP space you may
-need to customise ``ip_range_blacklist`` or ``ip_range_whitelist``.
-
-Upgrading to v1.24.0
-====================
-
-Custom OpenID Connect mapping provider breaking change
-------------------------------------------------------
-
-This release allows the OpenID Connect mapping provider to perform normalisation
-of the localpart of the Matrix ID. This allows for the mapping provider to
-specify different algorithms, instead of the [default way](https://matrix.org/docs/spec/appendices#mapping-from-other-character-sets).
-
-If your Synapse configuration uses a custom mapping provider
-(`oidc_config.user_mapping_provider.module` is specified and not equal to
-`synapse.handlers.oidc_handler.JinjaOidcMappingProvider`) then you *must* ensure
-that `map_user_attributes` of the mapping provider performs some normalisation
-of the `localpart` returned. To match previous behaviour you can use the
-`map_username_to_mxid_localpart` function provided by Synapse. An example is
-shown below:
-
-.. code-block:: python
-
-  from synapse.types import map_username_to_mxid_localpart
-
-  class MyMappingProvider:
-      def map_user_attributes(self, userinfo, token):
-          # ... your custom logic ...
-          sso_user_id = ...
-          localpart = map_username_to_mxid_localpart(sso_user_id)
-
-          return {"localpart": localpart}
-
-Removal historical Synapse Admin API
-------------------------------------
-
-Historically, the Synapse Admin API has been accessible under:
-
-* ``/_matrix/client/api/v1/admin``
-* ``/_matrix/client/unstable/admin``
-* ``/_matrix/client/r0/admin``
-* ``/_synapse/admin/v1``
-
-The endpoints with ``/_matrix/client/*`` prefixes have been removed as of v1.24.0.
-The Admin API is now only accessible under:
-
-* ``/_synapse/admin/v1``
-
-The only exception is the `/admin/whois` endpoint, which is
-`also available via the client-server API <https://matrix.org/docs/spec/client_server/r0.6.1#get-matrix-client-r0-admin-whois-userid>`_.
-
-The deprecation of the old endpoints was announced with Synapse 1.20.0 (released
-on 2020-09-22) and makes it easier for homeserver admins to lock down external
-access to the Admin API endpoints.
-
 Upgrading to v1.23.0
 ====================
 
@@ -305,7 +87,7 @@ then it should be modified based on the `structured logging documentation
 <https://github.com/matrix-org/synapse/blob/master/docs/structured_logging.md>`_.
 
 The ``structured`` and ``drains`` logging options are now deprecated and should
-be replaced by standard logging configuration of ``handlers`` and ``formatters``.
+be replaced by standard logging configuration of ``handlers`` and ``formatters`.
 
 A future will release of Synapse will make using ``structured: true`` an error.
 

changelog.d/6739.feature

@@ -0,0 +1 @@
+Implement "room knocking" as per MSC2403. Contributed by Sorunome and anoa.

changelog.d/8286.feature

@@ -0,0 +1 @@
+Add a push rule that highlights when a jitsi conference is created in a room.

changelog.d/8455.bugfix

@@ -0,0 +1 @@
+Fix fetching of E2E cross signing keys over federation when only one of the master key and device signing key is cached already.

changelog.d/8519.feature

@@ -0,0 +1 @@
+Add an admin api to delete a single file or files were not used for a defined time from server. Contributed by @dklimpel.

changelog.d/8539.feature

@@ -0,0 +1 @@
+Split admin API for reported events (`GET /_synapse/admin/v1/event_reports`) into detail and list endpoints. This is a breaking change to #8217 which was introduced in Synapse v1.21.0. Those who already use this API should check their scripts. Contributed by @dklimpel.

changelog.d/8559.misc

@@ -0,0 +1 @@
+Optimise `/createRoom` with multiple invited users.

changelog.d/8580.bugfix

@@ -0,0 +1 @@
+Fix a bug where Synapse would blindly forward bad responses from federation to clients when retrieving profile information.

changelog.d/8582.doc

@@ -0,0 +1 @@
+Instructions for Azure AD in the OpenID Connect documentation. Contributed by peterk.

changelog.d/8595.misc

@@ -0,0 +1 @@
+Implement and use an @lru_cache decorator.

changelog.d/8607.feature

@@ -0,0 +1 @@
+Support generating structured logs via the standard logging configuration.

changelog.d/8610.feature

@@ -0,0 +1 @@
+Add an admin APIs to allow server admins to list users' pushers. Contributed by @dklimpel.

changelog.d/8614.misc

@@ -0,0 +1 @@
+Don't instansiate Requester directly.

changelog.d/8615.misc

@@ -0,0 +1 @@
+Type hints for `RegistrationStore`.

changelog.d/8616.misc

@@ -0,0 +1 @@
+Change schema to support access tokens belonging to one user but granting access to another.

changelog.d/8620.bugfix

@@ -0,0 +1 @@
+Fix a bug where the account validity endpoint would silently fail if the user ID did not have an expiration time. It now returns a 400 error.

changelog.d/8621.misc

@@ -0,0 +1 @@
+Remove unused OPTIONS handlers.

changelog.d/8627.bugfix

@@ -0,0 +1 @@
+Fix email notifications for invites without local state.

changelog.d/8628.bugfix

@@ -0,0 +1 @@
+Fix handling of invalid group IDs to return a 400 rather than log an exception and return a 500.

changelog.d/8632.bugfix

@@ -0,0 +1 @@
+Fix handling of User-Agent headers that are invalid UTF-8, which caused user agents of users to not get correctly recorded.

changelog.d/8633.misc

@@ -0,0 +1 @@
+Run `mypy` as part of the lint.sh script.

changelog.d/8634.misc

@@ -0,0 +1 @@
+Correct Synapse's PyPI package name in the OpenID Connect installation instructions.

changelog.d/8635.doc

@@ -0,0 +1 @@
+Improve the sample configuration for single sign-on providers.

changelog.d/8639.misc

@@ -0,0 +1 @@
+Fix typos and spelling errors in the code.

changelog.d/8640.misc

@@ -0,0 +1 @@
+Reduce number of OpenTracing spans started.

changelog.d/8643.bugfix

@@ -0,0 +1 @@
+Fix a bug in the `joined_rooms` admin API if the user has never joined any rooms. The bug was introduced, along with the API, in v1.21.0.

changelog.d/8644.misc

@@ -0,0 +1 @@
+Add field `total` to device list in admin API.

changelog.d/8647.feature

@@ -0,0 +1 @@
+Add an admin API `GET /_synapse/admin/v1/users/<user_id>/media` to get information about uploaded media. Contributed by @dklimpel.

changelog.d/8655.misc

@@ -0,0 +1 @@
+Add more type hints to the application services code.

changelog.d/8657.doc

@@ -0,0 +1 @@
+Fix the filepath of Dex's example config and the link to Dex's Getting Started guide in the OpenID Connect docs.

changelog.d/8664.misc

@@ -0,0 +1 @@
+Tell Black to format code for Python 3.5.

changelog.d/8665.doc

@@ -0,0 +1 @@
+Note support for Python 3.9.

changelog.d/8666.doc

@@ -0,0 +1 @@
+Minor updates to docs on running tests.

changelog.d/8667.doc

@@ -0,0 +1 @@
+Interlink prometheus/grafana documentation.

changelog.d/8668.misc

@@ -0,0 +1 @@
+Reduce number of OpenTracing spans started.

changelog.d/8669.misc

@@ -0,0 +1 @@
+Don't pull event from DB when handling replication traffic.

changelog.d/8670.misc

@@ -0,0 +1 @@
+Reduce number of OpenTracing spans started.

changelog.d/8671.misc

@@ -0,0 +1 @@
+Abstract some invite-related code in preparation for landing knocking.

changelog.d/8675.misc

@@ -1 +0,0 @@
-Temporarily drop cross-user m.room_key_request to_device messages over performance concerns.

changelog.d/8679.misc

@@ -0,0 +1 @@
+Clarify representation of events in logfiles.

changelog.d/8680.misc

@@ -0,0 +1 @@
+Don't require `hiredis` package to be installed to run unit tests.

changelog.d/8682.bugfix

@@ -0,0 +1 @@
+Fix exception during handling multiple concurrent requests for remote media when using multiple media repositories.

changelog.d/8684.misc

@@ -0,0 +1 @@
+Fix typing info on cache call signature to accept `on_invalidate`.

changelog.d/8685.feature

@@ -0,0 +1 @@
+Support generating structured logs via the standard logging configuration.

changelog.d/8688.misc

@@ -0,0 +1 @@
+Abstract some invite-related code in preparation for landing knocking.

changelog.d/8689.feature

@@ -0,0 +1 @@
+Add an admin APIs to allow server admins to list users' pushers. Contributed by @dklimpel.

changelog.d/8690.misc

@@ -0,0 +1 @@
+Fail tests if they do not await coroutines.

changelog.d/8693.misc

@@ -0,0 +1 @@
+Add more type hints to the application services code.

changelog.d/8694.misc

@@ -0,0 +1 @@
+Improve start time by adding an index to `e2e_cross_signing_keys.stream_id`.

changelog.d/8697.misc

@@ -0,0 +1 @@
+ Re-organize the structured logging code to separate the TCP transport handling from the JSON formatting.

changelog.d/8698.misc

@@ -0,0 +1 @@
+Use Python 3.8 in Docker images by default.

changelog.d/8700.feature

@@ -0,0 +1 @@
+Add an admin API for local user media statistics. Contributed by @dklimpel.

changelog.d/8701.doc

@@ -0,0 +1 @@
+Notes on SSO logins and media_repository worker.

changelog.d/8702.misc

@@ -0,0 +1 @@
+Remove the "draft" status of the Room Details Admin API.

changelog.d/8705.misc

@@ -0,0 +1 @@
+Improve the error returned when a non-string displayname or avatar_url is used when updating a user's profile.

changelog.d/8706.doc

@@ -0,0 +1 @@
+Document experimental support for running multiple event persisters.

changelog.d/8708.misc

@@ -0,0 +1 @@
+Block attempts by clients to send server ACLs, or redactions of server ACLs, that would result in the local server being blocked from the room.

changelog.d/8713.misc

@@ -0,0 +1 @@
+Consolidate duplicated lists of purged tables that are checked in tests.

changelog.d/8714.doc

@@ -0,0 +1 @@
+Add information regarding the various sources of, and expected contributions to, Synapse's documentation to `CONTRIBUTING.md`.

changelog.d/8722.feature

@@ -0,0 +1 @@
+Add `displayname` to Shared-Secret Registration for admins.

changelog.d/8957.feature

@@ -1 +0,0 @@
-Add rate limiters to cross-user key sharing requests.

changelog.d/8978.feature

@@ -1 +0,0 @@
-Add `order_by` to the admin API `GET /_synapse/admin/v1/users/<user_id>/media`. Contributed by @dklimpel.

changelog.d/9203.feature

@@ -1 +0,0 @@
-Add some configuration settings to make users' profile data more private.

changelog.d/9285.bugfix

@@ -1 +0,0 @@
-Fix a bug where users' pushers were not all deleted when they deactivated their account.

changelog.d/9358.misc

@@ -1 +0,0 @@
-Added a fix that invalidates cache for empty timed-out sync responses.

changelog.d/9383.feature

@@ -1 +0,0 @@
-Add a configuration option, `user_directory.prefer_local_users`, which when enabled will make it more likely for users on the same server as you to appear above other users.

changelog.d/9385.feature

@@ -1 +0,0 @@
- Add a configuration option, `user_directory.prefer_local_users`, which when enabled will make it more likely for users on the same server as you to appear above other users.

changelog.d/9402.bugfix

@@ -1 +0,0 @@
-Fix a bug where a lot of unnecessary presence updates were sent when joining a room.

changelog.d/9416.bugfix

@@ -1 +0,0 @@
-Fix a bug that caused multiple calls to the experimental `shared_rooms` endpoint to return stale results.

changelog.d/9432.misc

@@ -1 +0,0 @@
-Add documentation and type hints to `parse_duration`.

changelog.d/9436.bugfix

@@ -1 +0,0 @@
-Fix a bug in single sign-on which could cause a "No session cookie found" error.

changelog.d/9438.feature

@@ -1 +0,0 @@
-Add support for regenerating thumbnails if they have been deleted but the original image is still stored.

changelog.d/9440.bugfix

@@ -1 +0,0 @@
-Fix bug introduced in v1.27.0 where allowing a user to choose their own username when logging in via single sign-on did not work unless an `idp_icon` was defined.

changelog.d/9449.bugfix

@@ -1 +0,0 @@
-Fix a bug introduced in v1.26.0 where some sequences were not properly configured when running `synapse_port_db`.

changelog.d/9462.misc

@@ -1 +0,0 @@
-Remove vestiges of `uploads_path` configuration setting.

changelog.d/9463.doc

@@ -1 +0,0 @@
-Update the example systemd config to propagate reloads to individual units.

changelog.d/9464.misc

@@ -1 +0,0 @@
-Add a comment about systemd-python.

changelog.d/9465.bugfix

@@ -1 +0,0 @@
-Fix deleting pushers when using sharded pushers.

changelog.d/9466.bugfix

@@ -1 +0,0 @@
-Fix deleting pushers when using sharded pushers.

changelog.d/9470.bugfix

@@ -1 +0,0 @@
-Fix missing startup checks for the consistency of certain PostgreSQL sequences.

changelog.d/9472.feature

@@ -1 +0,0 @@
-Add support for `X-Forwarded-Proto` header when using a reverse proxy.

changelog.d/9479.bugfix

@@ -1 +0,0 @@
-Fix deleting pushers when using sharded pushers.

changelog.d/9496.misc

@@ -1 +0,0 @@
-Test that we require validated email for email pushers.

changelog.d/9501.feature

@@ -1 +0,0 @@
-Add support for `X-Forwarded-Proto` header when using a reverse proxy.

contrib/cmdclient/console.py

@@ -92,7 +92,7 @@ class SynapseCmd(cmd.Cmd):
         return self.config["user"].split(":")[1]
 
     def do_config(self, line):
-        """Show the config for this client: "config"
+        """ Show the config for this client: "config"
         Edit a key value mapping: "config key value" e.g. "config token 1234"
         Config variables:
             user: The username to auth with.
@@ -360,7 +360,7 @@ class SynapseCmd(cmd.Cmd):
             print(e)
 
     def do_topic(self, line):
-        """ "topic [set|get] <roomid> [<newtopic>]"
+        """"topic [set|get] <roomid> [<newtopic>]"
         Set the topic for a room: topic set <roomid> <newtopic>
         Get the topic for a room: topic get <roomid>
         """
@@ -690,7 +690,7 @@ class SynapseCmd(cmd.Cmd):
         self._do_presence_state(2, line)
 
     def _parse(self, line, keys, force_keys=False):
-        """Parses the given line.
+        """ Parses the given line.
 
         Args:
             line : The line to parse
@@ -721,7 +721,7 @@ class SynapseCmd(cmd.Cmd):
         query_params={"access_token": None},
         alt_text=None,
     ):
-        """Runs an HTTP request and pretty prints the output.
+        """ Runs an HTTP request and pretty prints the output.
 
         Args:
             method: HTTP method

contrib/cmdclient/http.py

@@ -23,10 +23,11 @@ from twisted.web.http_headers import Headers
 
 
 class HttpClient:
-    """Interface for talking json over http"""
+    """ Interface for talking json over http
+    """
 
     def put_json(self, url, data):
-        """Sends the specifed json data using PUT
+        """ Sends the specifed json data using PUT
 
         Args:
             url (str): The URL to PUT data to.
@@ -40,7 +41,7 @@ class HttpClient:
         pass
 
     def get_json(self, url, args=None):
-        """Gets some json from the given host homeserver and path
+        """ Gets some json from the given host homeserver and path
 
         Args:
             url (str): The URL to GET data from.
@@ -57,7 +58,7 @@ class HttpClient:
 
 
 class TwistedHttpClient(HttpClient):
-    """Wrapper around the twisted HTTP client api.
+    """ Wrapper around the twisted HTTP client api.
 
     Attributes:
         agent (twisted.web.client.Agent): The twisted Agent used to send the
@@ -86,7 +87,8 @@ class TwistedHttpClient(HttpClient):
         defer.returnValue(json.loads(body))
 
     def _create_put_request(self, url, json_data, headers_dict={}):
-        """Wrapper of _create_request to issue a PUT request"""
+        """ Wrapper of _create_request to issue a PUT request
+        """
 
         if "Content-Type" not in headers_dict:
             raise defer.error(RuntimeError("Must include Content-Type header for PUTs"))
@@ -96,7 +98,8 @@ class TwistedHttpClient(HttpClient):
         )
 
     def _create_get_request(self, url, headers_dict={}):
-        """Wrapper of _create_request to issue a GET request"""
+        """ Wrapper of _create_request to issue a GET request
+        """
         return self._create_request("GET", url, headers_dict=headers_dict)
 
     @defer.inlineCallbacks
@@ -124,7 +127,8 @@ class TwistedHttpClient(HttpClient):
 
     @defer.inlineCallbacks
     def _create_request(self, method, url, producer=None, headers_dict={}):
-        """Creates and sends a request to the given url"""
+        """ Creates and sends a request to the given url
+        """
         headers_dict["User-Agent"] = ["Synapse Cmd Client"]
 
         retries_left = 5
@@ -181,7 +185,8 @@ class _RawProducer:
 
 
 class _JsonProducer:
-    """Used by the twisted http client to create the HTTP body from json"""
+    """ Used by the twisted http client to create the HTTP body from json
+    """
 
     def __init__(self, jsn):
         self.data = jsn

contrib/experiments/cursesio.py

@@ -63,7 +63,8 @@ class CursesStdIO:
         self.redraw()
 
     def redraw(self):
-        """method for redisplaying lines based on internal list of lines"""
+        """ method for redisplaying lines
+            based on internal list of lines """
 
         self.stdscr.clear()
         self.paintStatus(self.statusText)

contrib/experiments/test_messaging.py

@@ -56,7 +56,7 @@ def excpetion_errback(failure):
 
 
 class InputOutput:
-    """This is responsible for basic I/O so that a user can interact with
+    """ This is responsible for basic I/O so that a user can interact with
     the example app.
     """
 
@@ -68,7 +68,8 @@ class InputOutput:
         self.server = server
 
     def on_line(self, line):
-        """This is where we process commands."""
+        """ This is where we process commands.
+        """
 
         try:
             m = re.match(r"^join (\S+)$", line)
@@ -132,7 +133,7 @@ class IOLoggerHandler(logging.Handler):
 
 
 class Room:
-    """Used to store (in memory) the current membership state of a room, and
+    """ Used to store (in memory) the current membership state of a room, and
     which home servers we should send PDUs associated with the room to.
     """
 
@@ -147,7 +148,8 @@ class Room:
         self.have_got_metadata = False
 
     def add_participant(self, participant):
-        """Someone has joined the room"""
+        """ Someone has joined the room
+        """
         self.participants.add(participant)
         self.invited.discard(participant)
 
@@ -158,13 +160,14 @@ class Room:
             self.oldest_server = server
 
     def add_invited(self, invitee):
-        """Someone has been invited to the room"""
+        """ Someone has been invited to the room
+        """
         self.invited.add(invitee)
         self.servers.add(origin_from_ucid(invitee))
 
 
 class HomeServer(ReplicationHandler):
-    """A very basic home server implentation that allows people to join a
+    """ A very basic home server implentation that allows people to join a
     room and then invite other people.
     """
 
@@ -178,7 +181,8 @@ class HomeServer(ReplicationHandler):
         self.output = output
 
     def on_receive_pdu(self, pdu):
-        """We just received a PDU"""
+        """ We just received a PDU
+        """
         pdu_type = pdu.pdu_type
 
         if pdu_type == "sy.room.message":
@@ -195,20 +199,23 @@ class HomeServer(ReplicationHandler):
             )
 
     def _on_message(self, pdu):
-        """We received a message"""
+        """ We received a message
+        """
         self.output.print_line(
             "#%s %s %s" % (pdu.context, pdu.content["sender"], pdu.content["body"])
         )
 
     def _on_join(self, context, joinee):
-        """Someone has joined a room, either a remote user or a local user"""
+        """ Someone has joined a room, either a remote user or a local user
+        """
         room = self._get_or_create_room(context)
         room.add_participant(joinee)
 
         self.output.print_line("#%s %s %s" % (context, joinee, "*** JOINED"))
 
     def _on_invite(self, origin, context, invitee):
-        """Someone has been invited"""
+        """ Someone has been invited
+        """
         room = self._get_or_create_room(context)
         room.add_invited(invitee)
 
@@ -221,7 +228,8 @@ class HomeServer(ReplicationHandler):
 
     @defer.inlineCallbacks
     def send_message(self, room_name, sender, body):
-        """Send a message to a room!"""
+        """ Send a message to a room!
+        """
         destinations = yield self.get_servers_for_context(room_name)
 
         try:
@@ -239,7 +247,8 @@ class HomeServer(ReplicationHandler):
 
     @defer.inlineCallbacks
     def join_room(self, room_name, sender, joinee):
-        """Join a room!"""
+        """ Join a room!
+        """
         self._on_join(room_name, joinee)
 
         destinations = yield self.get_servers_for_context(room_name)
@@ -260,7 +269,8 @@ class HomeServer(ReplicationHandler):
 
     @defer.inlineCallbacks
     def invite_to_room(self, room_name, sender, invitee):
-        """Invite someone to a room!"""
+        """ Invite someone to a room!
+        """
         self._on_invite(self.server_name, room_name, invitee)
 
         destinations = yield self.get_servers_for_context(room_name)

contrib/jitsimeetbridge/jitsimeetbridge.py

@@ -193,12 +193,15 @@ class TrivialXmppClient:
         time.sleep(7)
         print("SSRC spammer started")
         while self.running:
-            ssrcMsg = "<presence to='%(tojid)s' xmlns='jabber:client'><x xmlns='http://jabber.org/protocol/muc'/><c xmlns='http://jabber.org/protocol/caps' hash='sha-1' node='http://jitsi.org/jitsimeet' ver='0WkSdhFnAUxrz4ImQQLdB80GFlE='/><nick xmlns='http://jabber.org/protocol/nick'>%(nick)s</nick><stats xmlns='http://jitsi.org/jitmeet/stats'><stat name='bitrate_download' value='175'/><stat name='bitrate_upload' value='176'/><stat name='packetLoss_total' value='0'/><stat name='packetLoss_download' value='0'/><stat name='packetLoss_upload' value='0'/></stats><media xmlns='http://estos.de/ns/mjs'><source type='audio' ssrc='%(assrc)s' direction='sendre'/><source type='video' ssrc='%(vssrc)s' direction='sendre'/></media></presence>" % {
-                "tojid": "%s@%s/%s" % (ROOMNAME, ROOMDOMAIN, self.shortJid),
-                "nick": self.userId,
-                "assrc": self.ssrcs["audio"],
-                "vssrc": self.ssrcs["video"],
-            }
+            ssrcMsg = (
+                "<presence to='%(tojid)s' xmlns='jabber:client'><x xmlns='http://jabber.org/protocol/muc'/><c xmlns='http://jabber.org/protocol/caps' hash='sha-1' node='http://jitsi.org/jitsimeet' ver='0WkSdhFnAUxrz4ImQQLdB80GFlE='/><nick xmlns='http://jabber.org/protocol/nick'>%(nick)s</nick><stats xmlns='http://jitsi.org/jitmeet/stats'><stat name='bitrate_download' value='175'/><stat name='bitrate_upload' value='176'/><stat name='packetLoss_total' value='0'/><stat name='packetLoss_download' value='0'/><stat name='packetLoss_upload' value='0'/></stats><media xmlns='http://estos.de/ns/mjs'><source type='audio' ssrc='%(assrc)s' direction='sendre'/><source type='video' ssrc='%(vssrc)s' direction='sendre'/></media></presence>"
+                % {
+                    "tojid": "%s@%s/%s" % (ROOMNAME, ROOMDOMAIN, self.shortJid),
+                    "nick": self.userId,
+                    "assrc": self.ssrcs["audio"],
+                    "vssrc": self.ssrcs["video"],
+                }
+            )
             res = self.sendIq(ssrcMsg)
             print("reply from ssrc announce: ", res)
             time.sleep(10)

contrib/prometheus/README.md

@@ -20,7 +20,6 @@ Add a new job to the main prometheus.conf file:
 ```
 
 ### for Prometheus v2
-
 Add a new job to the main prometheus.yml file:
 
 ```yaml
@@ -30,17 +29,14 @@ Add a new job to the main prometheus.yml file:
     scheme: "https"
 
     static_configs:
-    - targets: ["my.server.here:port"]
+    - targets: ['SERVER.LOCATION:PORT']
 ```
 
-An example of a Prometheus configuration with workers can be found in
-[metrics-howto.md](https://github.com/matrix-org/synapse/blob/master/docs/metrics-howto.md).
-
 To use `synapse.rules` add
 
 ```yaml
-  rule_files:
-    - "/PATH/TO/synapse-v2.rules"
+    rule_files:
+      - "/PATH/TO/synapse-v2.rules"
 ```
 
 Metrics are disabled by default when running synapse; they must be enabled

contrib/prometheus/consoles/synapse.html

@@ -9,7 +9,7 @@
 new PromConsole.Graph({
   node: document.querySelector("#process_resource_utime"),
   expr: "rate(process_cpu_seconds_total[2m]) * 100",
-  name: "[[job]]-[[index]]",
+  name: "[[job]]",  
   min: 0,
   max: 100,
   renderer: "line",
@@ -22,12 +22,12 @@ new PromConsole.Graph({
 </script>
 
 <h3>Memory</h3>
-<div id="process_resident_memory_bytes"></div>
+<div id="process_resource_maxrss"></div>
 <script>
 new PromConsole.Graph({
-  node: document.querySelector("#process_resident_memory_bytes"),
-  expr: "process_resident_memory_bytes",
-  name: "[[job]]-[[index]]",
+  node: document.querySelector("#process_resource_maxrss"),
+  expr: "process_psutil_rss:max",
+  name: "Maxrss",
   min: 0,
   renderer: "line",
   height: 150,
@@ -43,8 +43,8 @@ new PromConsole.Graph({
 <script>
 new PromConsole.Graph({
   node: document.querySelector("#process_fds"),
-  expr: "process_open_fds",
-  name: "[[job]]-[[index]]",
+  expr: "process_open_fds{job='synapse'}",
+  name: "FDs",
   min: 0,
   renderer: "line",
   height: 150,
@@ -62,8 +62,8 @@ new PromConsole.Graph({
 <script>
 new PromConsole.Graph({
   node: document.querySelector("#reactor_total_time"),
-  expr: "rate(python_twisted_reactor_tick_time_sum[2m])",
-  name: "[[job]]-[[index]]",
+  expr: "rate(python_twisted_reactor_tick_time:total[2m]) / 1000",
+  name: "time",
   max: 1,
   min: 0,
   renderer: "area",
@@ -80,8 +80,8 @@ new PromConsole.Graph({
 <script>
 new PromConsole.Graph({
   node: document.querySelector("#reactor_average_time"),
-  expr: "rate(python_twisted_reactor_tick_time_sum[2m]) / rate(python_twisted_reactor_tick_time_count[2m])",
-  name: "[[job]]-[[index]]",
+  expr: "rate(python_twisted_reactor_tick_time:total[2m]) / rate(python_twisted_reactor_tick_time:count[2m]) / 1000",
+  name: "time",
   min: 0,
   renderer: "line",
   height: 150,
@@ -97,14 +97,14 @@ new PromConsole.Graph({
 <script>
 new PromConsole.Graph({
   node: document.querySelector("#reactor_pending_calls"),
-  expr: "rate(python_twisted_reactor_pending_calls_sum[30s]) / rate(python_twisted_reactor_pending_calls_count[30s])",
-  name: "[[job]]-[[index]]",
+  expr: "rate(python_twisted_reactor_pending_calls:total[30s])/rate(python_twisted_reactor_pending_calls:count[30s])",
+  name: "calls",
   min: 0,
   renderer: "line",
   height: 150,
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
-  yTitle: "Pending Calls"
+  yTitle: "Pending Cals"
 })
 </script>
 
@@ -115,7 +115,7 @@ new PromConsole.Graph({
 <script>
 new PromConsole.Graph({
   node: document.querySelector("#synapse_storage_query_time"),
-  expr: "sum(rate(synapse_storage_query_time_count[2m])) by (verb)",
+  expr: "rate(synapse_storage_query_time:count[2m])",
   name: "[[verb]]",
   yAxisFormatter: PromConsole.NumberFormatter.humanizeNoSmallPrefix,
   yHoverFormatter: PromConsole.NumberFormatter.humanizeNoSmallPrefix,
@@ -129,8 +129,8 @@ new PromConsole.Graph({
 <script>
 new PromConsole.Graph({
   node: document.querySelector("#synapse_storage_transaction_time"),
-  expr: "topk(10, rate(synapse_storage_transaction_time_count[2m]))",
-  name: "[[job]]-[[index]] [[desc]]",
+  expr: "rate(synapse_storage_transaction_time:count[2m])",
+  name: "[[desc]]",
   min: 0,
   yAxisFormatter: PromConsole.NumberFormatter.humanizeNoSmallPrefix,
   yHoverFormatter: PromConsole.NumberFormatter.humanizeNoSmallPrefix,
@@ -140,12 +140,12 @@ new PromConsole.Graph({
 </script>
 
 <h3>Transaction execution time</h3>
-<div id="synapse_storage_transactions_time_sec"></div>
+<div id="synapse_storage_transactions_time_msec"></div>
 <script>
 new PromConsole.Graph({
-  node: document.querySelector("#synapse_storage_transactions_time_sec"),
-  expr: "rate(synapse_storage_transaction_time_sum[2m])",
-  name: "[[job]]-[[index]] [[desc]]",
+  node: document.querySelector("#synapse_storage_transactions_time_msec"),
+  expr: "rate(synapse_storage_transaction_time:total[2m]) / 1000",
+  name: "[[desc]]",
   min: 0,
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
@@ -154,33 +154,34 @@ new PromConsole.Graph({
 })
 </script>
 
-<h3>Average time waiting for database connection</h3>
-<div id="synapse_storage_avg_waiting_time"></div>
+<h3>Database scheduling latency</h3>
+<div id="synapse_storage_schedule_time"></div>
 <script>
 new PromConsole.Graph({
-  node: document.querySelector("#synapse_storage_avg_waiting_time"),
-  expr: "rate(synapse_storage_schedule_time_sum[2m]) / rate(synapse_storage_schedule_time_count[2m])",
-  name: "[[job]]-[[index]]",
+  node: document.querySelector("#synapse_storage_schedule_time"),
+  expr: "rate(synapse_storage_schedule_time:total[2m]) / 1000",
+  name: "Total latency",
   min: 0,
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
-  yUnits: "s",
-  yTitle: "Time"
+  yUnits: "s/s",
+  yTitle: "Usage"
 })
 </script>
 
-<h3>Cache request rate</h3>
-<div id="synapse_cache_request_rate"></div>
+<h3>Cache hit ratio</h3>
+<div id="synapse_cache_ratio"></div>
 <script>
 new PromConsole.Graph({
-  node: document.querySelector("#synapse_cache_request_rate"),
-  expr: "rate(synapse_util_caches_cache:total[2m])",
-  name: "[[job]]-[[index]] [[name]]",
+  node: document.querySelector("#synapse_cache_ratio"),
+  expr: "rate(synapse_util_caches_cache:total[2m]) * 100",
+  name: "[[name]]",
   min: 0,
+  max: 100,
   yAxisFormatter: PromConsole.NumberFormatter.humanizeNoSmallPrefix,
   yHoverFormatter: PromConsole.NumberFormatter.humanizeNoSmallPrefix,
-  yUnits: "rps",
-  yTitle: "Cache request rate"
+  yUnits: "%",
+  yTitle: "Percentage"
 })
 </script>
 
@@ -190,7 +191,7 @@ new PromConsole.Graph({
 new PromConsole.Graph({
   node: document.querySelector("#synapse_cache_size"),
   expr: "synapse_util_caches_cache:size",
-  name: "[[job]]-[[index]] [[name]]",
+  name: "[[name]]",
   yAxisFormatter: PromConsole.NumberFormatter.humanizeNoSmallPrefix,
   yHoverFormatter: PromConsole.NumberFormatter.humanizeNoSmallPrefix,
   yUnits: "",
@@ -205,8 +206,8 @@ new PromConsole.Graph({
 <script>
 new PromConsole.Graph({
   node: document.querySelector("#synapse_http_server_request_count_servlet"),
-  expr: "rate(synapse_http_server_in_flight_requests_count[2m])",
-  name: "[[job]]-[[index]] [[method]] [[servlet]]",
+  expr: "rate(synapse_http_server_request_count:servlet[2m])",
+  name: "[[servlet]]",
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
   yUnits: "req/s",
@@ -218,8 +219,8 @@ new PromConsole.Graph({
 <script>
 new PromConsole.Graph({
   node: document.querySelector("#synapse_http_server_request_count_servlet_minus_events"),
-  expr: "rate(synapse_http_server_in_flight_requests_count{servlet!=\"EventStreamRestServlet\", servlet!=\"SyncRestServlet\"}[2m])",
-  name: "[[job]]-[[index]] [[method]] [[servlet]]",
+  expr: "rate(synapse_http_server_request_count:servlet{servlet!=\"EventStreamRestServlet\", servlet!=\"SyncRestServlet\"}[2m])",
+  name: "[[servlet]]",
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
   yUnits: "req/s",
@@ -232,8 +233,8 @@ new PromConsole.Graph({
 <script>
 new PromConsole.Graph({
   node: document.querySelector("#synapse_http_server_response_time_avg"),
-  expr: "rate(synapse_http_server_response_time_seconds_sum[2m]) / rate(synapse_http_server_response_count[2m])",
-  name: "[[job]]-[[index]] [[servlet]]",
+  expr: "rate(synapse_http_server_response_time_seconds[2m]) / rate(synapse_http_server_response_count[2m]) / 1000",
+  name: "[[servlet]]",
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
   yUnits: "s/req",
@@ -276,7 +277,7 @@ new PromConsole.Graph({
 new PromConsole.Graph({
   node: document.querySelector("#synapse_http_server_response_ru_utime"),
   expr: "rate(synapse_http_server_response_ru_utime_seconds[2m])",
-  name: "[[job]]-[[index]] [[servlet]]",
+  name: "[[servlet]]",
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
   yUnits: "s/s",
@@ -291,7 +292,7 @@ new PromConsole.Graph({
 new PromConsole.Graph({
   node: document.querySelector("#synapse_http_server_response_db_txn_duration"),
   expr: "rate(synapse_http_server_response_db_txn_duration_seconds[2m])",
-  name: "[[job]]-[[index]] [[servlet]]",
+  name: "[[servlet]]",
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
   yUnits: "s/s",
@@ -305,8 +306,8 @@ new PromConsole.Graph({
 <script>
 new PromConsole.Graph({
   node: document.querySelector("#synapse_http_server_send_time_avg"),
-  expr: "rate(synapse_http_server_response_time_seconds_sum{servlet='RoomSendEventRestServlet'}[2m]) / rate(synapse_http_server_response_count{servlet='RoomSendEventRestServlet'}[2m])",
-  name: "[[job]]-[[index]] [[servlet]]",
+  expr: "rate(synapse_http_server_response_time_second{servlet='RoomSendEventRestServlet'}[2m]) / rate(synapse_http_server_response_count{servlet='RoomSendEventRestServlet'}[2m]) / 1000",
+  name: "[[servlet]]",
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
   yUnits: "s/req",
@@ -322,7 +323,7 @@ new PromConsole.Graph({
 new PromConsole.Graph({
   node: document.querySelector("#synapse_federation_client_sent"),
   expr: "rate(synapse_federation_client_sent[2m])",
-  name: "[[job]]-[[index]] [[type]]",
+  name: "[[type]]",
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
   yUnits: "req/s",
@@ -336,7 +337,7 @@ new PromConsole.Graph({
 new PromConsole.Graph({
   node: document.querySelector("#synapse_federation_server_received"),
   expr: "rate(synapse_federation_server_received[2m])",
-  name: "[[job]]-[[index]] [[type]]",
+  name: "[[type]]",
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
   yUnits: "req/s",
@@ -366,7 +367,7 @@ new PromConsole.Graph({
 new PromConsole.Graph({
   node: document.querySelector("#synapse_notifier_listeners"),
   expr: "synapse_notifier_listeners",
-  name: "[[job]]-[[index]]",
+  name: "listeners",
   min: 0,
   yAxisFormatter: PromConsole.NumberFormatter.humanizeNoSmallPrefix,
   yHoverFormatter: PromConsole.NumberFormatter.humanizeNoSmallPrefix,
@@ -381,7 +382,7 @@ new PromConsole.Graph({
 new PromConsole.Graph({
   node: document.querySelector("#synapse_notifier_notified_events"),
   expr: "rate(synapse_notifier_notified_events[2m])",
-  name: "[[job]]-[[index]]",
+  name: "events",
   yAxisFormatter: PromConsole.NumberFormatter.humanize,
   yHoverFormatter: PromConsole.NumberFormatter.humanize,
   yUnits: "events/s",