We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
#7124 changed the behaviour of remote thumbnails so that the thumbnailing method was included in the filename of the thumbnail. To support existing files, it included a fallback so that we would check the old filename if the new filename didn't exist.
Unfortunately, it didn't apply this logic to storage providers, so any thumbnails stored on such a storage provider was broken.
For negative streams we have to negate the internal stream ID before
querying the DB.
The effect of this bug was to query far too many rows, slowing start up
time, but we would correctly filter the results afterwards so there was
no ill effect.
This converts a few more of our inline HTML templates to Jinja. This is somewhat part of #7280 and should make it a bit easier to customize these in the future.
The idea is that in future tokens will encode a mapping of instance to position. However, we don't want to include the full instance name in the string representation, so instead we'll have a mapping between instance name and an immutable integer ID in the DB that we can use instead. We'll then do the lookup when we serialize/deserialize the token (we could alternatively pass around an `Instance` type that includes both the name and ID, but that turns out to be a lot more invasive).
This was a bit unweildy for what I wanted: in particular, I wanted to assign
each measurement straight into a bucket, rather than storing an intermediate
Counter which didn't do any bucketing at all.
I've replaced it with something that is hopefully a bit easier to use.
(I'm not entirely sure what the difference between a HistogramMetricFamily and
a GaugeHistogramMetricFamily is, but given our counters can go down as well as
up the latter *sounds* more accurate?)
Our hacked-up `_exposition.py` was stripping out some samples it shouldn't
have been. Put them back in, to more closely match the upstream
`exposition.py`.
* Don't check whether a 3pid is allowed to register during password reset
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
* Changelog
* Fix table scan of events on worker startup.
This happened because we assumed "new" writers had an initial stream
position of 0, so the replication code tried to fetch all events written
by the instance between 0 and the current position.
Instead, set the initial position of new writers to the current
persisted up to position, on the assumption that new writers won't have
written anything before that point.
* Consider old writers coming back as "new".
Otherwise we'd try and fetch entries between the old stale token and the
current position, even though it won't have written any rows.
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
This PR adds a script that:
* Builds the local Synapse checkout using our existing `docker/Dockerfile` image.
* Downloads [Complement](https://github.com/matrix-org/complement/)'s source code.
* Builds the [Synapse.Dockerfile](https://github.com/matrix-org/complement/blob/master/dockerfiles/Synapse.Dockerfile) using the above dockerfile as a base.
* Builds and runs Complement against it.
This set up differs slightly from [that of the dendrite repo](https://github.com/matrix-org/dendrite/blob/master/build/scripts/complement.sh) (`complement.sh`, `Complement.Dockerfile`), which instead stores a separate, but slightly modified, dockerfile in Dendrite's repo rather than running the one stored in Complement's repo. That synapse equivalent to that dockerfile (`Synapse.Dockerfile`) in Complement's repo is just based on top of `matrixdotorg/synapse:latest`, which we opt to build here locally.
Thus copying over the files from Complement's repo wouldn't change any functionality, and would result in two instances of the same files. So just using the dockerfile in Complement's repo was decided upon instead.
Broken in https://github.com/matrix-org/synapse/pull/8275 and has yet to be put in a release. Fixes https://github.com/matrix-org/synapse/issues/8418.
`next_link` is an optional parameter. However, we were checking whether the `next_link` param was valid, even if it wasn't provided. In that case, `next_link` was `None`, which would clearly not be a valid URL.
This would prevent password reset and other operations if `next_link` was not provided, and the `next_link_domain_whitelist` config option was set.
* Remove `on_timeout_cancel` from `timeout_deferred`
The `on_timeout_cancel` param to `timeout_deferred` wasn't always called on a
timeout (in particular if the canceller raised an exception), so it was
unreliable. It was also only used in one place, and to be honest it's easier to
do what it does a different way.
* Fix handling of connection timeouts in outgoing http requests
Turns out that if we get a timeout during connection, then a different
exception is raised, which wasn't always handled correctly.
To fix it, catch the exception in SimpleHttpClient and turn it into a
RequestTimedOutError (which is already a documented exception).
Also add a description to RequestTimedOutError so that we can see which stage
it failed at.
* Fix incorrect handling of timeouts reading federation responses
This was trapping the wrong sort of TimeoutError, so was never being hit.
The effect was relatively minor, but we should fix this so that it does the
expected thing.
* Fix inconsistent handling of `timeout` param between methods
`get_json`, `put_json` and `delete_json` were applying a different timeout to
the response body to `post_json`; bring them in line and test.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
This table was created in #8034 (1.20.0). It references
`ui_auth_sessions`, which is ignored, so this one should be too.
Signed-off-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
* Fix test_verify_json_objects_for_server_awaits_previous_requests
It turns out that this wasn't really testing what it thought it was testing
(in particular, `check_context` was turning failures into success, which was
making the tests pass even though it wasn't clear they should have been.
It was also somewhat overcomplex - we can test what it was trying to test
without mocking out perspectives servers.
* Fix warnings about finished logcontexts in the keyring
We need to make sure that we finish the key fetching magic before we run the
verifying code, to ensure that we don't mess up our logcontexts.
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
On startup `MultiWriteIdGenerator` fetches the maximum stream ID for
each instance from the table and uses that as its initial "current
position" for each writer. This is problematic as a) it involves either
a scan of events table or an index (neither of which is ideal), and b)
if rows are being persisted out of order elsewhere while the process
restarts then using the maximum stream ID is not correct. This could
theoretically lead to race conditions where e.g. events that are
persisted out of order are not sent down sync streams.
We fix this by creating a new table that tracks the current positions of
each writer to the stream, and update it each time we finish persisting
a new entry. This is a relatively small overhead when persisting events.
However for the cache invalidation stream this is a much bigger relative
overhead, so instead we note that for invalidation we don't actually
care about reliability over restarts (as there's no caches to
invalidate) and simply don't bother reading and writing to the new table
in that particular case.
#8037 changed the default `autoescape` option when rendering Jinja2 templates from `False` to `True`. This caused some bugs, noticeably around redirect URLs being escaped in SAML2 auth confirmation templates, causing those URLs to break for users.
This change returns the previous behaviour as it stood. We may want to look at each template individually and see whether autoescaping is a good idea at some point, but for now lets just fix the breakage.
The idea is to remove some of the places we pass around `int`, where it can represent one of two things:
1. the position of an event in the stream; or
2. a token that partitions the stream, used as part of the stream tokens.
The valid operations are then:
1. did a position happen before or after a token;
2. get all events that happened before or after a token; and
3. get all events between two tokens.
(Note that we don't want to allow other operations as we want to change the tokens to be vector clocks rather than simple ints)
I'd like to get a better insight into what we are doing with respect to state
res. The list of state groups we are resolving across should be short (if it
isn't, that's a massive problem in itself), so it should be fine to log it in
ite entiretly.
I've done some grepping and found approximately zero cases in which the
"shortcut" code delivered the result, so I've ripped that out too.
When updating the `room_stats_state` table, we try to check for null bytes slipping in to the content for state events. It turns out we had added `guest_access` as a field to room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a `m.room.guest_access` event then breaks `room_stats_state` updates.
This PR adds the check for `guest_access`.
This change adds a note and a few lines of configuration settings for Apache users to disable ModSecurity for Synapse's virtual hosts. With ModSecurity enabled and running with its default settings, Matrix clients are unable to send chat messages through the Synapse installation. With this change, ModSecurity can be disabled only for the Synapse virtual hosts.
When updating room_stats_state, we try to check for null bytes slipping
in to the
content for state events. It turns out we had added guest_access as a
field to
room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a m.room.guest_access event then breaks
room_stats_state
updates.
This PR adds the check for guest_access. A further PR will improve this
function so that this hopefully does not happen again in future.
Fixes: #8359
Trying to reactivate a user with the admin API (`PUT /_synapse/admin/v2/users/<user_name>`) causes an internal server error.
Seems to be a regression in #8033.
* Create a new function to verify that the length of a device name is
under a certain threshold.
* Refactor old code and tests to use said function.
* Verify device name length during registration of device
* Add a test for the above
Signed-off-by: Dionysis Grigoropoulos <dgrig@erethon.com>
1.19.3
Synapse 1.19.3 (2020-09-18)
===========================
Bugfixes
--------
- Partially mitigate bug where newly joined servers couldn't get past
events in a room when there is a malformed event.
([\#8350](https://github.com/matrix-org/synapse/issues/8350))
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Fix _set_destination_retry_timings
This came about because the code assumed that retry_interval
could not be NULL — which has been challenged by catch-up.
Add ability for ASes to /login using the `uk.half-shot.msc2778.login.application_service` login `type`.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
This is a bit of a hack, as `_check_sigs_and_hash_and_fetch` is intended
for attempting to pull an event from the database/(re)pull it from the
server that originally sent the event if checking the signature of the
event fails.
During backfill we *know* that we won't have the event in our database,
however it is still useful to be able to query the original sending
server as the server we're backfilling from may be acting maliciously.
The main benefit and reason for this change however is that
`_check_sigs_and_hash_and_fetch` will drop an event during backfill if
it cannot be successfully validated, whereas the current code will
simply fail the backfill request - resulting in the client's /messages
request silently being dropped.
This is a quick patch to fix backfilling rooms that contain malformed
events. A better implementation in planned in future.
Instead of just using the most recent extremities let's pick the
ones that will give us results that the pagination request cares about,
i.e. pick extremities only if they have a smaller depth than the
pagination token.
This is useful when we fail to backfill an extremity, as we no longer
get stuck requesting that same extremity repeatedly.
Synapse 1.20.0rc4 (2020-09-16)
==============================
Synapse 1.20.0rc4 is identical to 1.20.0rc3, with the addition of the security fix that was included in 1.19.2.
slots use less memory (and attribute access is faster) while slightly
limiting the flexibility of the class attributes. This focuses on objects
which are instantiated "often" and for short periods of time.
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
Synapse 1.20.0rc3 (2020-09-11)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
Some Linux distros have begun disabling TLSv1.0 and TLSv1.1 by default
for security reasons, for example in Fedora 33 onwards:
https://fedoraproject.org/wiki/Changes/StrongCryptoSettings2
Use TLSv1.2 for the fake TLS servers created in the test suite, to avoid
failures due to OpenSSL disallowing TLSv1.0:
<twisted.python.failure.Failure OpenSSL.SSL.Error: [('SSL routines',
'ssl_choose_client_version', 'unsupported protocol')]>
Signed-off-by: Dan Callaghan <djc@djc.id.au>
This PR adds a information about forwarding `/_synapse/client` endpoints through your reverse proxy. The first of these endpoints are introduced in https://github.com/matrix-org/synapse/pull/8004.
The idea here is that we pass the `max_stream_id` to everything, and only use the stream ID of the particular event to figure out *when* the max stream position has caught up to the event and we can notify people about it.
This is to maintain the distinction between the position of an item in the stream (i.e. event A has stream ID 513) and a token that can be used to partition the stream (i.e. give me all events after stream ID 352). This distinction becomes important when the tokens are more complicated than a single number, which they will be once we start tracking the position of multiple writers in the tokens.
The valid operations here are:
1. Is a position before or after a token
2. Fetching all events between two tokens
3. Merging multiple tokens to get the "max", i.e. `C = max(A, B)` means that for all positions P where P is before A *or* before B, then P is before C.
Future PR will change the token type to a dedicated type.
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
If a file cannot be thumbnailed for some reason (e.g. the file is empty), then
catch the exception and convert it to a reasonable error message for the client.
`pusher_pool.on_new_notifications` expected a min and max stream ID, however that was not what we were passing in. Instead, let's just pass it the current max stream ID and have it track the last stream ID it got passed.
I believe that it mostly worked as we called the function for every event. However, it would break for events that got persisted out of order, i.e, that were persisted but the max stream ID wasn't incremented as not all preceding events had finished persisting, and push for that event would be delayed until another event got pushed to the effected users.
This fixes an issue where different methods (crop/scale) overwrite each other.
This first tries the new path. If that fails and we are looking for a
remote thumbnail, it tries the old path. If that still isn't found, it
continues as normal.
This should probably be removed in the future, after some of the newer
thumbnails were generated with the new path on most deployments. Then
the overhead should be minimal if the other thumbnails need to be
regenerated.
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
The intention here is to change `StreamToken.room_key` to be a `RoomStreamToken` in a future PR, but that is a big enough change without this refactoring too.
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
This removes `SourcePaginationConfig` and `get_pagination_rows`. The reasoning behind this is that these generic classes/functions erased the types of the IDs it used (i.e. instead of passing around `StreamToken` it'd pass in e.g. `token.room_key`, which don't have uniform types).
By importing from canonicaljson the simplejson module was still being used
in some situations. After this change the std lib json is consistenty used
throughout Synapse.
Fixes https://github.com/matrix-org/synapse/issues/8238
Alongside the delta file, some changes were also necessary to the codebase to remove references to the now defunct `populate_stats_process_rooms_2` background job. Thankfully the latter doesn't seem to have made it into any documentation yet :)
The version 1.3.0 has a bug with unicode charecters:
```
>>> from canonicaljson import encode_pretty_printed_json
>>> encode_pretty_printed_json({'a': 'à'})
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/erdnaxeli/.pyenv/versions/3.6.7/lib/python3.6/site-packages/canonicaljson.py", line 96, in encode_pretty_printed_json
return _pretty_encoder.encode(json_object).encode("ascii")
UnicodeEncodeError: 'ascii' codec can't encode character '\xe0' in position 12: ordinal not in range(128)
```
Signed-off-by: Alexandre Morignot <erdnaxeli@cervoi.se>
Co-authored-by: Alexandre Morignot <erdnaxeli@cervoi.se>
* Fixup `ALTER TABLE` database queries
Make the new columns nullable, because doing otherwise can wedge a
server with a big database, as setting a default value rewrites the
table.
* Switch back to using the notifications count in the push badge
Clients are likely to be confused if we send a push but the badge count
is the unread messages one, and not the notifications one.
* Changelog
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
* Add shared_rooms api
* Add changelog
* Add .
* Wrap response in {"rooms": }
* linting
* Add unstable_features key
* Remove options from isort that aren't part of 5.x
`-y` and `-rc` are now default behaviour and no longer exist.
`dont-skip` is no longer required
https://timothycrosley.github.io/isort/CHANGELOG/#500-penny-july-4-2020
* Update imports to make isort happy
* Add changelog
* Update tox.ini file with correct invocation
* fix linting again for isort
* Vendor prefix unstable API
* Fix to match spec
* import Codes
* import Codes
* Use FORBIDDEN
* Update changelog.d/7785.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Implement get_shared_rooms_for_users
* a comma
* trailing whitespace
* Handle the easy feedback
* Switch to using runInteraction
* Add tests
* Feedback
* Seperate unstable endpoint from v2
* Add upgrade node
* a line
* Fix style by adding a blank line at EOF.
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Tulir Asokan <tulir@maunium.net>
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Update UPGRADE.rst
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Fix UPGRADE/CHANGELOG unstable paths
unstable unstable unstable
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
* Move `get_devices_with_keys_by_user` to `EndToEndKeyWorkerStore`
this seems a better fit for it.
This commit simply moves the existing code: no other changes at all.
* Rename `get_devices_with_keys_by_user`
to better reflect what it does.
* get_device_stream_token abstract method
To avoid referencing fields which are declared in the derived classes, make
`get_device_stream_token` abstract, and define that in the classes which define
`_device_list_id_gen`.
... and to show that it does something slightly different to
`_get_e2e_device_keys_txn`.
`include_all_devices` and `include_deleted_devices` were never used (and
`include_deleted_devices` was broken, since that would cause `None`s in the
result which were not handled in the loop below.
Add some typing too.
This fixes a bug where having multiple callers waiting on the same
stream and position will cause it to try and compare two deferreds,
which fails (due to the sorted list having an entry of `Tuple[int,
Deferred]`).
This is split out from https://github.com/matrix-org/synapse/pull/7438, which had gotten rather large.
`LoginRestServlet` has a couple helper methods, `login_submission_legacy_convert` and `login_id_thirdparty_from_phone`. They're primarily used for converting legacy user login submissions to "identifier" dicts ([see spec](https://matrix.org/docs/spec/client_server/r0.6.1#post-matrix-client-r0-login)). Identifying information such as usernames or 3PID information used to be top-level in the login body. They're now supposed to be put inside an [identifier](https://matrix.org/docs/spec/client_server/r0.6.1#identifier-types) parameter instead.
#7438's purpose is to allow using the new identifier parameter during User-Interactive Authentication, which is currently handled in AuthHandler. That's why I've moved these helper methods there. I also moved the refactoring of these method from #7438 as they're relevant.
This ensures systemctl start matrix-synapse returns only after synapse
is actually started, which is very useful for automated deployments.
Fixes#5761
Signed-off-by: Dexter Chua <dec41@srcf.net>
#8174 removed the `is_guest` parameter from `get_room_data`, at the same time that #8157 was merged using it, colliding together to break unit tests on develop.
This PR removes the `is_guest` parameter from the call in the broken test.
Uses the same changelog as #8174.
Small cleanup PR.
* Removed the unused `is_guest` argument
* Added a safeguard to a (currently) impossible code path, fixing static checking at the same time.
Synapse 1.19.1rc1 (2020-08-25)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.19.0 where appservices with ratelimiting disabled would still be ratelimited when joining rooms. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix a bug introduced in v1.19.0 that would cause e.g. profile updates to fail due to incorrect application of rate limits on join requests. ([\#8153](https://github.com/matrix-org/synapse/issues/8153))
Add new method ratelimiter.can_requester_do_action and ensure that appservices are exempt from being ratelimited.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
* Don't raise session_id errors on submit_token if request_token_inhibit_3pid_errors is set
* Changelog
* Also wait some time before responding to /requestToken
* Incorporate review
* Update synapse/storage/databases/main/registration.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Incorporate review
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Add new method ratelimiter.can_requester_do_action and ensure that appservices are exempt from being ratelimited.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
It's just a thin wrapper around two ID gens to make `get_current_token`
and `get_next` return tuples. This can easily be replaced by calling the
appropriate methods on the underlying ID gens directly.
The function is used for two purposes: 1) for subscribers of streams to
get a token they can use to get further updates with, and 2) for
replication to track position of the writers of the stream.
For streams with a single writer the two scenarios produce the same
result, however the situation becomes complicated for streams with
multiple writers. The current `MultiWriterIdGenerator` does not
correctly handle the first case (which is not an issue as its only used
for the `caches` stream which nothing subscribes to outside of
replication).
If we got an error persisting an event, we would try to remove the push actions
asynchronously, which would lead to a 'Re-starting finished log context'
warning.
I don't think there's any need for this to be asynchronous.
We do this to prevent foot guns. The default config uses a MemoryFilter,
but users are free to change to logging to files directly. If they do
then they have to ensure to set the `filters: [context]` on the right
handler, otherwise records get written with the wrong context.
Instead we move the logic to happen when we generate a record, which is
when we *log* rather than *handle*.
(It's possible to add filters to loggers in the config, however they
don't apply to descendant loggers and so they have to be manually set on
*every* logger used in the code base)
We do this to prevent foot guns. The default config uses a MemoryFilter,
but users are free to change to logging to files directly. If they do
then they have to ensure to set the `filters: [context]` on the right
handler, otherwise records get written with the wrong context.
Instead we move the logic to happen when we generate a record, which is
when we *log* rather than *handle*.
(It's possible to add filters to loggers in the config, however they
don't apply to descendant loggers and so they have to be manually set on
*every* logger used in the code base)
c.f. #8021
A lot of the code here is to change the `Completed 200 OK` logging to include the request URI so that we can drop the `Sending request...` log line.
Some notes:
1. We won't log retries, which may be confusing considering the time taken log line includes retries and sleeps.
2. The `_send_request_with_optional_trailing_slash` will always be logged *without* the forward slash, even if it succeeded only with the forward slash.
* Change default log config to buffer by default.
This batches up writes to the filesystem, which is more efficient for
disk I/O. This means that it can take some time for logs to get written
to disk. Note that ERROR logs (and above) immediately flush the buffer.
This only effects new installs, as we only write the log config if
started with `--generate-config` (in the same way we do for generating
signing keys).
* Default to keeping last 4 days of logs.
This hopefully reduces the amount of logs kept for new servers. Keeping
the last 1GB of logs is likely overkill for new servers, but equally may
not be enough for busy ones.
Instead, we keep the last four days worth of logs, enough so that admins
can investigate any problems that happened over e.g. a long weekend.
Duplicating function signatures between server.py and server.pyi is
silly. This commit changes that by changing all `build_*` methods to
`get_*` methods and changing the `_make_dependency_method` to work work
as a descriptor that caches the produced value.
There are some changes in other files that were made to fix the typing
in server.py.
This PR:
* Reduces the amount of noise in the `check-newsfragment` CI output by hiding the dependency installation output by default.
* Prints a link to the changelog/debian changelog section of the contributing guide if an error is found.
This has long been something I've wanted to do. Basically the `Daemonize` code
is both too flexible and not flexible enough, in that it offers a bunch of
features that we don't use (changing UID, closing FDs in the child, logging to
syslog) and doesn't offer a bunch that we could do with (redirecting stdout/err
to a file instead of /dev/null; having the parent not exit until the child is
running).
As a first step, I've lifted the Daemonize code and removed the bits we don't
use. This should be a non-functional change. Fixing everything else will come
later.
We've [decided](https://github.com/matrix-org/synapse/issues/5253#issuecomment-665976308) to remove the signature check for v1 lookups.
The signature check has been removed in v2 lookups. v1 lookups are currently deprecated. As mentioned in the above linked issue, this verification was causing deployments for the vector.im and matrix.org IS deployments, and this change is the simplest solution, without being unjustified.
Implementations are encouraged to use the v2 lookup API as it has [increased privacy benefits](https://github.com/matrix-org/matrix-doc/pull/2134).
`StatsHandler` handles updates to the `current_state_delta_stream`, and updates room stats such as the amount of state events, joined users, etc.
However, it counts every new join membership as a new user entering a room (and that user being in another room), whereas it's possible for a user's membership status to go from join -> join, for instance when they change their per-room profile information.
This PR adds a check for join->join membership transitions, and bails out early, as none of the further checks are necessary at that point.
Due to this bug, membership stats in many rooms have ended up being wildly larger than their true values. I am not sure if we also want to include a migration step which recalculates these statistics (possibly using the `_populate_stats_process_rooms` bg update).
Bug introduced in the initial implementation https://github.com/matrix-org/synapse/pull/4338.
Thanks to some slightly overzealous cleanup in the
`delete_old_current_state_events`, it's possible to end up with no
`event_forward_extremities` in a room where we have outstanding local
invites. The user would then get a "no create event in auth events" when trying
to reject the invite.
We can hack around it by using the dangling invite as the prev event.
If there are *no* files with CRLF line endings, then the xargs exits with a
non-zero exit code (as expected), but then, since that is the last thing to
happen in the script, the script as a whole exits non-zero, making the whole
thing fail.
using `if/then/fi` instead of `&& (...)` means that the script exits with a
zero exit code.
IIRC this doesn't break tests because its only hit on reconnection, or something.
Basically, when a process needs to fetch missing updates for the `typing` stream it needs to query the writer instance via HTTP (as we don't write typing notifications to the DB), the problem was that the endpoint (`streams`) was only registered on master and specifically not on the typing writer worker.
Most of the stuff we do for replication commands can be done synchronously. There's no point spinning up background processes if we're not going to need them.
Handling of incoming typing stream updates from replication was not
hooked up on master, effecting set ups where typing was handled on a
different worker.
This is really only a problem if the master process is also handling
sync requests, which is unlikely for those that are at the stage of
moving typing off.
The other observable effect is that if a worker restarts or a
replication connect drops then the typing worker will issue a
`POSITION typing`, triggering master process to try and stream *all*
typing updates from position 0.
Fixes#7907
Converts tests/rest/admin/test_room.py to have unix file endings after they were accidentally changed in #7613.
Keeping the same changelog as #7613 as it hasn't gone out in a release yet.
If we send out an event which refers to `prev_events` which other servers in
the federation are missing, then (after a round or two of backfill attempts),
they will end up asking us for `/state_ids` at a particular point in the DAG.
As per https://github.com/matrix-org/synapse/issues/7893, this is quite
expensive, and we tend to see lots of very similar requests around the same
time.
We can therefore handle this much more efficiently by using a cache, which (a)
ensures that if we see the same request from multiple servers (or even the same
server, multiple times), then they share the result, and (b) any other servers
that miss the initial excitement can also benefit from the work.
[It's interesting to note that `/state` has a cache for exactly this
reason. `/state` is now essentially unused and replaced with `/state_ids`, but
evidently when we replaced it we forgot to add a cache to the new endpoint.]
For inbound federation requests, if a given remote server makes too many
requests at once, we start stacking them up rather than processing them
immediatedly.
However, that means that there is a fair chance that the requesting server will
disconnect before we start processing the request. In that case, if it was a
read-only request (ie, a GET request), there is absolutely no point in
building a response (and some requests are quite expensive to handle).
Even in the case of a POST request, one of two things will happen:
* Most likely, the requesting server will retry the request and we'll get the
information anyway.
* Even if it doesn't, the requesting server has to assume that we didn't get
the memo, and act accordingly.
In short, we're better off aborting the request at this point rather than
ploughing on with what might be a quite expensive request.
Run `isort`, `flake8` and `black` over the `contrib/` directory and `synctl` script. The latter was already being done in CI, but now the linting script does it too.
Fixes https://github.com/matrix-org/synapse/issues/7910
The [postgres setup docs](https://github.com/matrix-org/synapse/blob/develop/docs/postgres.md#set-up-database) recommend setting up your database with user `synapse_user`.
However, uncommenting the postgres defaults in the sample config leave you with user `synapse`.
This PR switches the sample config to recommend `synapse_user`. Took a me a second to figure this out, so assume this will beneficial to others.
As mentioned in #7397, switching to a debian base should help with multi-arch work to save time on compiling. This is unashamedly based on #6373, but without the extra functionality. Switch python version back to generic 3.7 to always pull the latest. Essentially, keeping this as small as possible. The image is bigger though unfortunately.
It serves no purpose and updating everytime we write to the device inbox
stream means all such transactions will conflict, causing lots of
transaction failures and retries.
I'm pretty sure there's no technical reason these have to be distinct server blocks, so collapse into one and go with the more terse location block.
Signed-off-by: Luke W Faraone <luke@faraone.cc>
When we get behind on replication, we tend to stack up background processes
behind a linearizer. Bg processes are heavy (particularly with respect to
prometheus metrics) and linearizers aren't terribly efficient once the queue
gets long either.
A better approach is to maintain a queue of requests to be processed, and
nominate a single process to work its way through the queue.
Fixes: #7444
It was correct at the time of our friend Jorik writing it (checking
git blame), but the world has moved now and it is no longer a
generator.
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
When considering rooms to clean up in `delete_old_current_state_events`, skip
rooms which we are creating, which otherwise look a bit like rooms we have
left.
Fixes#7834.
As far as I can tell from the sentry logs, the only time this has actually done
anything in the last two years is when we had two master workers running at
once, and even then, it made a bit of a mess of it (see
https://github.com/matrix-org/synapse/issues/7845#issuecomment-658238739).
Generally I feel like this code is doing more harm than good.
I'm tempted to remove this section entirely, but it's helpful for admins who are trying to figure out why their Synapse is crashing on start with ACME errors.
Signed-off-by: Luke W Faraone <luke@faraone.cc>
The replication client requires that arguments are given as keyword
arguments, which was not done in this case. We also pull out the logic
so that we can catch and handle any exceptions raised, rather than
leaving them unhandled.
When fetching the state of a room over federation we receive the event
IDs of the state and auth chain. We then fetch those events that we
don't already have.
However, we used a function that recursively fetched any missing auth
events for the fetched events, which can lead to a lot of recursion if
the server is missing most of the auth chain. This work is entirely
pointless because would have queued up the missing events in the auth
chain to be fetched already.
Let's just diable the recursion, since it only gets called from one
place anyway.
Fixes#2181.
The basic premise is that, when we
fail to reject an invite via the remote server, we can generate our own
out-of-band leave event and persist it as an outlier, so that we have something
to send to the client.
* Starting with apt 1.6, https support has moved into the main package and apt-transport-https has become a transitional dummy package.
Signed-off-by: Dirk Heinrichs <dirk.heinrichs@altum.de>
This table is no longer used, so we may as well stop populating it. Removing it
would prevent people rolling back to older releases of Synapse, so that can
happen in a future release.
* Fix spec compliance; tweaks without values are valid
(default to True, which is only concretely specified for
`highlight`, but it seems only reasonable to generalise)
* Changelog for 7766.
* Add documentation to `tweaks_for_actions`
May as well tidy up when I'm here.
* Add a test for `tweaks_for_actions`
Fixes https://github.com/matrix-org/synapse/issues/7641
The package was pinned to <0.8.0 without an obvious reasoning with
7ad1d7635
in https://github.com/matrix-org/synapse/pull/5636
while the version selection looks to just try to exclude an arbitrary
next minor version number that might introduce API breaking changes.
Selecting the next minor number might be a good conservative selection.
Downstream distributions already reported success patching out the version
requirements.
This also fixes the integration of upgraded packages into openSUSE packages,
e.g. for openSUSE Tumbleweed which already ships prometheus_client >= 0.8 .
Signed-off-by: Oliver Kurz <okurz@suse.de>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
The CI appears to use the latest version of isort, which is a problem when isort gets a major version bump. Rather than try to pin the version, I've done the necessary to make isort5 happy with synapse.
Synapse 1.15.2 (2020-07-02)
===========================
Due to the two security issues highlighted below, server administrators are
encouraged to update Synapse. We are not aware of these vulnerabilities being
exploited in the wild.
Security advisory
-----------------
* A malicious homeserver could force Synapse to reset the state in a room to a
small subset of the correct state. This affects all Synapse deployments which
federate with untrusted servers. ([96e9afe6](96e9afe625))
* HTML pages served via Synapse were vulnerable to clickjacking attacks. This
predominantly affects homeservers with single-sign-on enabled, but all server
administrators are encouraged to upgrade. ([ea26e9a9](ea26e9a98b))
This was reported by [Quentin Gliech](https://sandhose.fr/).
- Remove the requirement for a specific version of Python
- Move dep comment to a separate line, Tox 3.7.0 like trailing ones
Signed-off-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
State res v2 across large data sets can be very CPU intensive, and if
all the relevant events are in the cache the algorithm will run from
start to finish within a single reactor tick. This can result in
blocking the reactor tick for several seconds, which can have major
repercussions on other requests.
To fix this we simply add the occaisonal `sleep(0)` during iterations to
yield execution until the next reactor tick. The aim is to only do this
for large data sets so that we don't impact otherwise quick resolutions.=
HTTP requires the response to contain a Content-Length header unless chunked encoding is being used.
Prometheus metrics endpoint did not set this, causing software such as prometheus-proxy to not be able to scrape synapse for metrics.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Older versions of `parameterized` package have no `parameterized_class` decorator. This decorator is used in tests.
Signed-off-by: Oleg Girko <ol@infoserver.lv>
* Always return an unread_count in get_unread_event_push_actions_by_room_for_user
* Don't always expect unread_count to be there so we don't take out sync entirely if something goes wrong
This requires a new config option to specify which media repo should be
responsible for running background jobs to e.g. clear out expired URL
preview caches.
The aim here is to make it easier to reason about when streams are limited and when they're not, by moving the logic into the database functions themselves. This should mean we can kill of `db_query_to_update_function` function.
This ended up being a bit more invasive than I'd hoped for (not helped by
generic_worker duplicating some of the code from homeserver), but hopefully
it's an improvement.
The idea is that, rather than storing unstructured `dict`s in the config for
the listener configurations, we instead parse it into a structured
`ListenerConfig` object.
Fixes https://github.com/matrix-org/synapse/issues/7683
Broke in: #7649
We had a `yield` acting on a coroutine. To be fair this one is a bit difficult to notice as there's a function in the middle that just passes the coroutine along.
The spec [states](https://matrix.org/docs/spec/client_server/r0.6.1#phone-number) that `m.id.phone` requires the field `country` and `phone`.
In Synapse, we've been enforcing `country` and `number`.
I am not currently sure whether this affects any client implementations.
This issue was introduced in #1994.
Fixes https://github.com/matrix-org/synapse/issues/2431
Adds config option `encryption_enabled_by_default_for_room_type`, which determines whether encryption should be enabled with the default encryption algorithm in private or public rooms upon creation. Whether the room is private or public is decided based upon the room creation preset that is used.
Part of this PR is also pulling out all of the individual instances of `m.megolm.v1.aes-sha2` into a constant variable to eliminate typos ala https://github.com/matrix-org/synapse/pull/7637
Based on #7637
* Ensure account data stream IDs are unique.
The account data stream is shared between three tables, and the maximum
allocated ID was tracked in a dedicated table. Updating the max ID
happened outside the transaction that allocated the ID, leading to a
race where if the server was restarted then the same ID could be
allocated but the max ID failed to be updated, leading it to be reused.
The ID generators have support for tracking across multiple tables, so
we may as well use that instead of a dedicated table.
* Fix bug in account data replication stream.
If the same stream ID was used in both global and room account data then
the getting updates for the replication stream would fail due to
`heapq.merge(..)` trying to compare a `str` with a `None`. (This is
because you'd have two rows like `(534, '!room')` and `(534, None)` from
the room and global account data tables).
Fix is just to order by stream ID, since we don't rely on the ordering
beyond that. The bug where stream IDs can be reused should be fixed now,
so this case shouldn't happen going forward.
Fixes#7617
While working on https://github.com/matrix-org/synapse/issues/5665 I found myself digging into the `Ratelimiter` class and seeing that it was both:
* Rather undocumented, and
* causing a *lot* of config checks
This PR attempts to refactor and comment the `Ratelimiter` class, as well as encourage config file accesses to only be done at instantiation.
Best to be reviewed commit-by-commit.
Calls `self.get_success` on all deferred methods instead of abusing `self.pump()`. This has the benefit of working with coroutines, as well as checking that method execution completed successfully.
There are also a few small cleanups that I made in the process.
* Expose `return_html_error`, and allow it to take a Jinja2 template instead of a raw string
* Clean up exception handling in SAML2ResponseResource
* use the existing code in `return_html_error` instead of re-implementing it
(giving it a jinja2 template rather than inventing a new form of template)
* do the exception-catching in the REST layer rather than in the handler
layer, to make sure we catch all exceptions.
It looks like `user_device_resync` was ignoring cross-signing keys from the results received from the remote server. This patch fixes this, by processing these keys using the same process `_handle_signing_key_updates` does (and effectively factor that part out of that function).
The query keeps showing up in my slow query log.
This changes the plan under the top-level Sort node from
```
WindowAgg (cost=280335.88..292963.15 rows=561212 width=80) (actual time=138.651..160.562 rows=27112 loops=1)
-> Sort (cost=280335.88..281738.91 rows=561212 width=84) (actual time=138.597..140.622 rows=27112 loops=1)
Sort Key: state_groups_state.type, state_groups_state.state_key, state_groups_state.state_group
Sort Method: quicksort Memory: 4581kB
-> Nested Loop (cost=2.83..226745.22 rows=561212 width=84) (actual time=21.548..47.657 rows=27112 loops=1)
-> HashAggregate (cost=2.27..3.28 rows=101 width=8) (actual time=21.526..21.535 rows=20 loops=1)
Group Key: state.state_group
-> CTE Scan on state (cost=0.00..2.02 rows=101 width=8) (actual time=21.280..21.493 rows=20 loops=1)
-> Index Scan using state_groups_state_type_idx on state_groups_state (cost=0.56..2189.40 rows=5557 width=84) (actual time=0.005..0.991 rows=1356 loops=20)
Index Cond: (state_group = state.state_group)
```
to
```
Nested Loop (cost=2.83..226745.22 rows=561212 width=84) (actual time=24.194..52.834 rows=27112 loops=1)
-> HashAggregate (cost=2.27..3.28 rows=101 width=8) (actual time=24.130..24.138 rows=20 loops=1)
Group Key: state.state_group
-> CTE Scan on state (cost=0.00..2.02 rows=101 width=8) (actual time=23.887..24.113 rows=20 loops=1)
-> Index Scan using state_groups_state_type_idx on state_groups_state (cost=0.56..2189.40 rows=5557 width=84) (actual time=0.016..1.159 rows=1356 loops=20)
Index Cond: (state_group = state.state_group)
```
This cuts the execution time from ~190ms to ~130ms, i.e. a reduction
of ~30%.
The full plans are visualised at https://explain.depesz.com/s/WpbT and
https://explain.depesz.com/s/KlEk
Signed-off-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Without this patch, if an error happens which isn't caught by `user_device_resync`, then `_maybe_retry_device_resync` would fail, without retrying the next users in the iteration. This patch fixes this so that it now only logs an error in this case.
Synapse was added to the ports tree in Nov, 2019 by Renaud Allard (https://marc.info/?l=openbsd-ports&m=157417848805329).
With the release of OpenBSD 6.7 on May 22, 2020 a pre-compiled binary is available as well.
'client_auth_method' commented out value was erronously 'client_auth_basic',
when code and docstring says it should be 'client_secret_basic'.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
The bg update never managed to complete, because it kept being interrupted by
transactions which want to take a lock.
Just doing it in the foreground isn't that bad, and is a good deal simpler.
A couple of changes of significance:
* remove the `_last_ack < federation_position` condition, so that
updates will still be correctly processed after restart
* Correctly wire up send_federation_ack to the right class.
we can use `make_in_list_sql_clause` rather than doing our own half-baked
equivalent, which has the benefit of working just fine with empty lists.
(This has quite a lot of tests, so I think it's pretty safe)
The idea here is that if an instance persists an event via the replication HTTP API it can return before we receive that event over replication, which can lead to races where code assumes that persisting an event immediately updates various caches (e.g. current state of the room).
Most of Synapse doesn't hit such races, so we don't do the waiting automagically, instead we do so where necessary to avoid unnecessary delays. We may decide to change our minds here if it turns out there are a lot of subtle races going on.
People probably want to look at this commit by commit.
Instead of doing a complicated dance of deleting and moving aliases one
by one, which sends a canonical alias update into the old room for each
one, lets do it all in one go.
This also changes the function to move *all* local alias events to the new
room, however that happens later on anyway.
PyPy's gc.get_stats() returns an object containing detailed allocator statistics
which could be beneficial to collect as metrics.
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
When a call to `user_device_resync` fails, we don't currently mark the remote user's device list as out of sync, nor do we retry to sync it.
https://github.com/matrix-org/synapse/pull/6776 introduced some code infrastructure to mark device lists as stale/out of sync.
This commit uses that code infrastructure to mark device lists as out of sync if processing an incoming device list update makes the device handler realise that the device list is out of sync, but we can't resync right now.
It also adds a looping call to retry all failed resync every 30s. This shouldn't cause too much spam in the logs as this commit also removes the "Failed to handle device list update for..." warning logs when catching `NotRetryingDestination`.
Fixes#7418
We don't really make any promises about returning accurate presence data when
presence is disabled, so we may as well just return a static response, rather
than making the master handle a request.
`_is_server_still_joined` will throw if it is given state updates with non-user ID state keys with local user leaves. This is actually rarely a problem since local leaves almost always get persisted by themselves.
(I discovered this on a branch that was otherwise broken, so I haven't seen this in the wild)
* If an error occurs when stopping a process synctl now logs a warning.
* During a restart, synctl will avoid attempting to start Synapse if an error
occurs during stopping Synapse.
Make sure that the AccountDataStream presents complete updates, in the right
order.
This is much the same fix as #7337 and #7358, but applied to a different stream.
This is required as both event persistence and the background update needs access to this function. It should be perfectly safe for two workers to write to that table at the same time.
This allows us to have the logic on both master and workers, which is necessary to move event persistence off master.
We also combine the instantiation of ID generators from DataStore and slave stores to the base worker stores. This allows us to select which process writes events independently of the master/worker splits.
The specific headers that are passed using this new configuration format
are Host and X-Forwarded-For, which should be all that's required.
Note that for production another matcher should be added in the first
section to properly handle the base_url lookup:
reverse_proxy /.well-known/matrix/* http://localhost:8008
Signed-off-by: Jeff Peeler <jpeeler@gmail.com>
Continuation of #7379
Adds a section in the README telling people to go to #synapse:matrix.org instead of using github issues. I'm not entirely sure about placing it above the install section but then people are likely to first seek support when installing (if something goes boom), and it's probably better to have it as high as possible anyway so people actually see it.
This PR moves the "support is in #synapse:matrix.org" in the bug report template outside of the comment as some people seem to ignore what's in the comments, and phrase it a bit more like the support request template. It also adds a default issue template that says the same thing. It's also adding a notice about the security disclosure to both the default template and the bug report one.
It also adds a badge to the top of the README with an alt text saying about the same message if the badge doesn't load (e.g. if matrix.org is slow).
Fixes#6826
This is a potential solution to https://github.com/vector-im/riot-web/issues/3374
and https://github.com/vector-im/riot-web/issues/5953
as raised by Mozilla at https://github.com/vector-im/riot-web/issues/10868.
This lets you define a push rule action which increases the badge count (unread notification)
count on a given room, but doesn't actually send a push for that notification via email or HTTP.
We might want to define this as the default behaviour for group chats in future
to solve https://github.com/vector-im/riot-web/issues/3268 at last.
This is implemented as a string action rather than a tweak because:
* Other pushers don't care about the tweak, given they won't ever get pushed
* The DB can store the tweak more efficiently using the existing `notify` table.
* It avoids breaking the default_notif/highlight_action optimisations.
Clients which generate their own notifs (e.g. desktop notifs from Riot/Web
would need to be aware of the new push action) to uphold it.
An alternative way to do this would be to maintain a `msg_count` alongside
`highlight_count` and `notification_count` in `unread_notifications` in sync responses.
However, doing this by counting the rows in `events` since the `stream_position`
of the user's last read receipt turns out to be painfully slow (~200ms), perhaps
due to the size of the events table. So instead, we use the highly optimised
existing event_push_actions (and event_push_actions_staging) table to maintain
the counts - using the code paths which already exist for tracking unread
notification counts efficiently. These queries are typically ~3ms or so.
The biggest issues I see here are:
* We're slightly repurposing the `notif` field on `event_push_actions` to
track whether a given action actually sent a `push` or not. This doesn't
seem unreasonable, but it's slightly naughty given that previously the
field explicitly tracked whether `notify` was true for the action (and
as a result, it was uselessly always set to 1 in the DB).
* We're going to put more load on the `event_push_actions` table for all the
random group chats which people had previously muted. In practice i don't
think there are many of these though.
* There isn't an MSC for this yet (although this comment could become one).
2019-09-19 00:54:05 +01:00
865 changed files with 40860 additions and 20427 deletions
a future release will drop support for accessing Synapse's
[Admin API](https://github.com/matrix-org/synapse/tree/master/docs/admin_api) under the
`/_matrix/client/*` endpoint prefixes. At that point, the Admin API will only
be accessible under `/_synapse/admin`.
Synapse 1.21.0rc3 (2020-10-08)
==============================
Bugfixes
--------
- Fix a long-standing bug which could cause messages not to be sent over federation, when state events with state keys matching user IDs (such as custom user statuses) were received. ([\#7376](https://github.com/matrix-org/synapse/issues/7376))
- Restore compatibility with non-compliant clients during the user interactive authentication process, fixing a problem introduced in v1.13.0rc1. ([\#7483](https://github.com/matrix-org/synapse/issues/7483))
- Fix duplication of events on high traffic servers, caused by PostgreSQL `could not serialize access due to concurrent update` errors. ([\#8456](https://github.com/matrix-org/synapse/issues/8456))
Internal Changes
----------------
-Fix linting errors in new version of Flake8. ([\#7470](https://github.com/matrix-org/synapse/issues/7470))
-Add Groovy Gorilla to the list of distributions we build `.deb`s for. ([\#8475](https://github.com/matrix-org/synapse/issues/8475))
Synapse 1.13.0rc1 (2020-05-11)
Synapse 1.21.0rc2 (2020-10-02)
==============================
Features
--------
- Convert additional templates from inline HTML to Jinja2 templates. ([\#8444](https://github.com/matrix-org/synapse/issues/8444))
Bugfixes
--------
- Fix a regression in v1.21.0rc1 which broke thumbnails of remote media. ([\#8438](https://github.com/matrix-org/synapse/issues/8438))
- Do not expose the experimental `uk.half-shot.msc2778.login.application_service` flow in the login API, which caused a compatibility problem with Element iOS. ([\#8440](https://github.com/matrix-org/synapse/issues/8440))
- Fix malformed log line in new federation "catch up" logic. ([\#8442](https://github.com/matrix-org/synapse/issues/8442))
- Fix DB query on startup for negative streams which caused long start up times. Introduced in [\#8374](https://github.com/matrix-org/synapse/issues/8374). ([\#8447](https://github.com/matrix-org/synapse/issues/8447))
Synapse 1.21.0rc1 (2020-10-01)
==============================
Features
--------
- Require the user to confirm that their password should be reset after clicking the email confirmation link. ([\#8004](https://github.com/matrix-org/synapse/issues/8004))
- Add an admin API `GET /_synapse/admin/v1/event_reports` to read entries of table `event_reports`. Contributed by @dklimpel. ([\#8217](https://github.com/matrix-org/synapse/issues/8217))
- Consolidate the SSO error template across all configuration. ([\#8248](https://github.com/matrix-org/synapse/issues/8248), [\#8405](https://github.com/matrix-org/synapse/issues/8405))
- Add a configuration option to specify a whitelist of domains that a user can be redirected to after validating their email or phone number. ([\#8275](https://github.com/matrix-org/synapse/issues/8275), [\#8417](https://github.com/matrix-org/synapse/issues/8417))
- Add experimental support for sharding event persister. ([\#8294](https://github.com/matrix-org/synapse/issues/8294), [\#8387](https://github.com/matrix-org/synapse/issues/8387), [\#8396](https://github.com/matrix-org/synapse/issues/8396), [\#8419](https://github.com/matrix-org/synapse/issues/8419))
- Add the room topic and avatar to the room details admin API. ([\#8305](https://github.com/matrix-org/synapse/issues/8305))
- Add an admin API for querying rooms where a user is a member. Contributed by @dklimpel. ([\#8306](https://github.com/matrix-org/synapse/issues/8306))
- Add `uk.half-shot.msc2778.login.application_service` login type to allow appservices to login. ([\#8320](https://github.com/matrix-org/synapse/issues/8320))
- Add a configuration option that allows existing users to log in with OpenID Connect. Contributed by @BBBSnowball and @OmmyZhang. ([\#8345](https://github.com/matrix-org/synapse/issues/8345))
- Add prometheus metrics for replication requests. ([\#8406](https://github.com/matrix-org/synapse/issues/8406))
- Support passing additional single sign-on parameters to the client. ([\#8413](https://github.com/matrix-org/synapse/issues/8413))
- Add experimental reporting of metrics on expensive rooms for state-resolution. ([\#8420](https://github.com/matrix-org/synapse/issues/8420))
- Add experimental prometheus metric to track numbers of "large" rooms for state resolutiom. ([\#8425](https://github.com/matrix-org/synapse/issues/8425))
- Add prometheus metrics to track federation delays. ([\#8430](https://github.com/matrix-org/synapse/issues/8430))
Bugfixes
--------
- Fix a bug in the media repository where remote thumbnails with the same size but different crop methods would overwrite each other. Contributed by @deepbluev7. ([\#7124](https://github.com/matrix-org/synapse/issues/7124))
- Fix inconsistent handling of non-existent push rules, and stop tracking the `enabled` state of removed push rules. ([\#7796](https://github.com/matrix-org/synapse/issues/7796))
- Fix a longstanding bug when storing a media file with an empty `upload_name`. ([\#7905](https://github.com/matrix-org/synapse/issues/7905))
- Fix messages not being sent over federation until an event is sent into the same room. ([\#8230](https://github.com/matrix-org/synapse/issues/8230), [\#8247](https://github.com/matrix-org/synapse/issues/8247), [\#8258](https://github.com/matrix-org/synapse/issues/8258), [\#8272](https://github.com/matrix-org/synapse/issues/8272), [\#8322](https://github.com/matrix-org/synapse/issues/8322))
- Fix a longstanding bug where files that could not be thumbnailed would result in an Internal Server Error. ([\#8236](https://github.com/matrix-org/synapse/issues/8236), [\#8435](https://github.com/matrix-org/synapse/issues/8435))
- Upgrade minimum version of `canonicaljson` to version 1.4.0, to fix an unicode encoding issue. ([\#8262](https://github.com/matrix-org/synapse/issues/8262))
- Fix longstanding bug which could lead to incomplete database upgrades on SQLite. ([\#8265](https://github.com/matrix-org/synapse/issues/8265))
- Fix stack overflow when stderr is redirected to the logging system, and the logging system encounters an error. ([\#8268](https://github.com/matrix-org/synapse/issues/8268))
- Fix a bug which cause the logging system to report errors, if `DEBUG` was enabled and no `context` filter was applied. ([\#8278](https://github.com/matrix-org/synapse/issues/8278))
- Fix edge case where push could get delayed for a user until a later event was pushed. ([\#8287](https://github.com/matrix-org/synapse/issues/8287))
- Fix fetching malformed events from remote servers. ([\#8324](https://github.com/matrix-org/synapse/issues/8324))
- Fix `UnboundLocalError` from occuring when appservices send a malformed register request. ([\#8329](https://github.com/matrix-org/synapse/issues/8329))
- Don't send push notifications to expired user accounts. ([\#8353](https://github.com/matrix-org/synapse/issues/8353))
- Fix a regression in v1.19.0 with reactivating users through the admin API. ([\#8362](https://github.com/matrix-org/synapse/issues/8362))
- Fix a bug where during device registration the length of the device name wasn't limited. ([\#8364](https://github.com/matrix-org/synapse/issues/8364))
- Include `guest_access` in the fields that are checked for null bytes when updating `room_stats_state`. Broke in v1.7.2. ([\#8373](https://github.com/matrix-org/synapse/issues/8373))
- Fix theoretical race condition where events are not sent down `/sync` if the synchrotron worker is restarted without restarting other workers. ([\#8374](https://github.com/matrix-org/synapse/issues/8374))
- Fix a bug which could cause errors in rooms with malformed membership events, on servers using sqlite. ([\#8385](https://github.com/matrix-org/synapse/issues/8385))
- Fix "Re-starting finished log context" warning when receiving an event we already had over federation. ([\#8398](https://github.com/matrix-org/synapse/issues/8398))
- Fix incorrect handling of timeouts on outgoing HTTP requests. ([\#8400](https://github.com/matrix-org/synapse/issues/8400))
- Fix a regression in v1.20.0 in the `synapse_port_db` script regarding the `ui_auth_sessions_ips` table. ([\#8410](https://github.com/matrix-org/synapse/issues/8410))
- Remove unnecessary 3PID registration check when resetting password via an email address. Bug introduced in v0.34.0rc2. ([\#8414](https://github.com/matrix-org/synapse/issues/8414))
Improved Documentation
----------------------
- Add `/_synapse/client` to the reverse proxy documentation. ([\#8227](https://github.com/matrix-org/synapse/issues/8227))
- Add note to the reverse proxy settings documentation about disabling Apache's mod_security2. Contributed by Julian Fietkau (@jfietkau). ([\#8375](https://github.com/matrix-org/synapse/issues/8375))
- Improve description of `server_name` config option in `homserver.yaml`. ([\#8415](https://github.com/matrix-org/synapse/issues/8415))
Deprecations and Removals
-------------------------
- Drop support for `prometheus_client` older than 0.4.0. ([\#8426](https://github.com/matrix-org/synapse/issues/8426))
Internal Changes
----------------
- Fix tests on distros which disable TLSv1.0. Contributed by @danc86. ([\#8208](https://github.com/matrix-org/synapse/issues/8208))
- Simplify the distributor code to avoid unnecessary work. ([\#8216](https://github.com/matrix-org/synapse/issues/8216))
- Remove the `populate_stats_process_rooms_2` background job and restore functionality to `populate_stats_process_rooms`. ([\#8243](https://github.com/matrix-org/synapse/issues/8243))
- Clean up type hints for `PaginationConfig`. ([\#8250](https://github.com/matrix-org/synapse/issues/8250), [\#8282](https://github.com/matrix-org/synapse/issues/8282))
- Track the latest event for every destination and room for catch-up after federation outage. ([\#8256](https://github.com/matrix-org/synapse/issues/8256))
- Fix non-user visible bug in implementation of `MultiWriterIdGenerator.get_current_token_for_writer`. ([\#8257](https://github.com/matrix-org/synapse/issues/8257))
- Switch to the JSON implementation from the standard library. ([\#8259](https://github.com/matrix-org/synapse/issues/8259))
- Add type hints to `synapse.util.async_helpers`. ([\#8260](https://github.com/matrix-org/synapse/issues/8260))
- Simplify tests that mock asynchronous functions. ([\#8261](https://github.com/matrix-org/synapse/issues/8261))
- Add type hints to `StreamToken` and `RoomStreamToken` classes. ([\#8279](https://github.com/matrix-org/synapse/issues/8279))
- Change `StreamToken.room_key` to be a `RoomStreamToken` instance. ([\#8281](https://github.com/matrix-org/synapse/issues/8281))
- Refactor notifier code to correctly use the max event stream position. ([\#8288](https://github.com/matrix-org/synapse/issues/8288))
- Use slotted classes where possible. ([\#8296](https://github.com/matrix-org/synapse/issues/8296))
- Support testing the local Synapse checkout against the [Complement homeserver test suite](https://github.com/matrix-org/complement/). ([\#8317](https://github.com/matrix-org/synapse/issues/8317))
- Update outdated usages of `metaclass` to python 3 syntax. ([\#8326](https://github.com/matrix-org/synapse/issues/8326))
- Move lint-related dependencies to package-extra field, update CONTRIBUTING.md to utilise this. ([\#8330](https://github.com/matrix-org/synapse/issues/8330), [\#8377](https://github.com/matrix-org/synapse/issues/8377))
- Use the `admin_patterns` helper in additional locations. ([\#8331](https://github.com/matrix-org/synapse/issues/8331))
- Fix test logging to allow braces in log output. ([\#8335](https://github.com/matrix-org/synapse/issues/8335))
- Remove `__future__` imports related to Python 2 compatibility. ([\#8337](https://github.com/matrix-org/synapse/issues/8337))
- Simplify `super()` calls to Python 3 syntax. ([\#8344](https://github.com/matrix-org/synapse/issues/8344))
- Fix bad merge from `release-v1.20.0` branch to `develop`. ([\#8354](https://github.com/matrix-org/synapse/issues/8354))
- Factor out a `_send_dummy_event_for_room` method. ([\#8370](https://github.com/matrix-org/synapse/issues/8370))
- Improve logging of state resolution. ([\#8371](https://github.com/matrix-org/synapse/issues/8371))
- Add type annotations to `SimpleHttpClient`. ([\#8372](https://github.com/matrix-org/synapse/issues/8372))
- Refactor ID generators to use `async with` syntax. ([\#8383](https://github.com/matrix-org/synapse/issues/8383))
- Create a mechanism for marking tests "logcontext clean". ([\#8399](https://github.com/matrix-org/synapse/issues/8399))
- A pair of tiny cleanups in the federation request code. ([\#8401](https://github.com/matrix-org/synapse/issues/8401))
- Add checks on startup that PostgreSQL sequences are consistent with their associated tables. ([\#8402](https://github.com/matrix-org/synapse/issues/8402))
- Do not include appservice users when calculating the total MAU for a server. ([\#8404](https://github.com/matrix-org/synapse/issues/8404))
- Typing fixes for `synapse.handlers.federation`. ([\#8422](https://github.com/matrix-org/synapse/issues/8422))
- Various refactors to simplify stream token handling. ([\#8423](https://github.com/matrix-org/synapse/issues/8423))
- Make stream token serializing/deserializing async. ([\#8427](https://github.com/matrix-org/synapse/issues/8427))
Synapse 1.20.1 (2020-09-24)
===========================
Bugfixes
--------
- Fix a bug introduced in v1.20.0 which caused the `synapse_port_db` script to fail. ([\#8386](https://github.com/matrix-org/synapse/issues/8386))
- Fix a bug introduced in v1.20.0 which caused variables to be incorrectly escaped in Jinja2 templates. ([\#8394](https://github.com/matrix-org/synapse/issues/8394))
Synapse 1.20.0 (2020-09-22)
===========================
No significant changes since v1.20.0rc5.
Removal warning
---------------
Historically, the [Synapse Admin
API](https://github.com/matrix-org/synapse/tree/master/docs) has been
accessible under the `/_matrix/client/api/v1/admin`,
`/_matrix/client/unstable/admin`, `/_matrix/client/r0/admin` and
`/_synapse/admin` prefixes. In a future release, we will be dropping support
for accessing Synapse's Admin API using the `/_matrix/client/*` prefixes.
From that point, the Admin API will only be accessible under `/_synapse/admin`.
This makes it easier for homeserver admins to lock down external access to the
Admin API endpoints.
Synapse 1.20.0rc5 (2020-09-18)
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
Synapse 1.19.3 (2020-09-18)
===========================
Bugfixes
--------
- Partially mitigate bug where newly joined servers couldn't get past events in a room when there is a malformed event. ([\#8350](https://github.com/matrix-org/synapse/issues/8350))
Synapse 1.20.0rc4 (2020-09-16)
==============================
Synapse 1.20.0rc4 is identical to 1.20.0rc3, with the addition of the security fix that was included in 1.19.2.
Synapse 1.19.2 (2020-09-16)
===========================
Due to the issue below server admins are encouraged to upgrade as soon as possible.
Bugfixes
--------
- Fix joining rooms over federation that include malformed events. ([\#8324](https://github.com/matrix-org/synapse/issues/8324))
Synapse 1.20.0rc3 (2020-09-11)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
Synapse 1.20.0rc2 (2020-09-09)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 causing some features related to notifications to misbehave following the implementation of unread counts. ([\#8280](https://github.com/matrix-org/synapse/issues/8280))
Synapse 1.20.0rc1 (2020-09-08)
==============================
Removal warning
---------------
Some older clients used a [disallowed character](https://matrix.org/docs/spec/client_server/r0.6.1#post-matrix-client-r0-register-email-requesttoken) (`:`) in the `client_secret` parameter of various endpoints. The incorrect behaviour was allowed for backwards compatibility, but is now being removed from Synapse as most users have updated their client. Further context can be found at [\#6766](https://github.com/matrix-org/synapse/issues/6766).
Features
--------
- Add an endpoint to query your shared rooms with another user as an implementation of [MSC2666](https://github.com/matrix-org/matrix-doc/pull/2666). ([\#7785](https://github.com/matrix-org/synapse/issues/7785))
- Iteratively encode JSON to avoid blocking the reactor. ([\#8013](https://github.com/matrix-org/synapse/issues/8013), [\#8116](https://github.com/matrix-org/synapse/issues/8116))
- Add support for shadow-banning users (ignoring any message send requests). ([\#8034](https://github.com/matrix-org/synapse/issues/8034), [\#8092](https://github.com/matrix-org/synapse/issues/8092), [\#8095](https://github.com/matrix-org/synapse/issues/8095), [\#8142](https://github.com/matrix-org/synapse/issues/8142), [\#8152](https://github.com/matrix-org/synapse/issues/8152), [\#8157](https://github.com/matrix-org/synapse/issues/8157), [\#8158](https://github.com/matrix-org/synapse/issues/8158), [\#8176](https://github.com/matrix-org/synapse/issues/8176))
- Use the default template file when its equivalent is not found in a custom template directory. ([\#8037](https://github.com/matrix-org/synapse/issues/8037), [\#8107](https://github.com/matrix-org/synapse/issues/8107), [\#8252](https://github.com/matrix-org/synapse/issues/8252))
- Add unread messages count to sync responses, as specified in [MSC2654](https://github.com/matrix-org/matrix-doc/pull/2654). ([\#8059](https://github.com/matrix-org/synapse/issues/8059), [\#8254](https://github.com/matrix-org/synapse/issues/8254), [\#8270](https://github.com/matrix-org/synapse/issues/8270), [\#8274](https://github.com/matrix-org/synapse/issues/8274))
- Optimise `/federation/v1/user/devices/` API by only returning devices with encryption keys. ([\#8198](https://github.com/matrix-org/synapse/issues/8198))
Bugfixes
--------
- Fix a memory leak by limiting the length of time that messages will be queued for a remote server that has been unreachable. ([\#7864](https://github.com/matrix-org/synapse/issues/7864))
- Synapse now correctly enforces the valid characters in the `client_secret` parameter used in various endpoints. ([\#8101](https://github.com/matrix-org/synapse/issues/8101))
- Fix a bug introduced in v1.7.2 impacting message retention policies that would allow federated homeservers to dictate a retention period that's lower than the configured minimum allowed duration in the configuration file. ([\#8104](https://github.com/matrix-org/synapse/issues/8104))
- Fix a long-standing bug where invalid JSON would be accepted by Synapse. ([\#8106](https://github.com/matrix-org/synapse/issues/8106))
- Fix a bug introduced in Synapse v1.12.0 which could cause `/sync` requests to fail with a 404 if you had a very old outstanding room invite. ([\#8110](https://github.com/matrix-org/synapse/issues/8110))
- Return a proper error code when the rooms of an invalid group are requested. ([\#8129](https://github.com/matrix-org/synapse/issues/8129))
- Fix a bug which could cause a leaked postgres connection if synapse was set to daemonize. ([\#8131](https://github.com/matrix-org/synapse/issues/8131))
- Clarify the error code if a user tries to register with a numeric ID. This bug was introduced in v1.15.0. ([\#8135](https://github.com/matrix-org/synapse/issues/8135))
- Fix a bug where appservices with ratelimiting disabled would still be ratelimited when joining rooms. This bug was introduced in v1.19.0. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix logging in via OpenID Connect with a provider that uses integer user IDs. ([\#8190](https://github.com/matrix-org/synapse/issues/8190))
- Fix a longstanding bug where user directory updates could break when unexpected profile data was included in events. ([\#8223](https://github.com/matrix-org/synapse/issues/8223))
- Fix a longstanding bug where stats updates could break when unexpected profile data was included in events. ([\#8226](https://github.com/matrix-org/synapse/issues/8226))
- Fix slow start times for large servers by removing a table scan of the `users` table from startup code. ([\#8271](https://github.com/matrix-org/synapse/issues/8271))
Updates to the Docker image
---------------------------
- Fix builds of the Docker image on non-x86 platforms. ([\#8144](https://github.com/matrix-org/synapse/issues/8144))
- Added curl for healthcheck support and readme updates for the change. Contributed by @maquis196. ([\#8147](https://github.com/matrix-org/synapse/issues/8147))
Improved Documentation
----------------------
- Link to matrix-synapse-rest-password-provider in the password provider documentation. ([\#8111](https://github.com/matrix-org/synapse/issues/8111))
- Updated documentation to note that Synapse does not follow `HTTP 308` redirects due to an upstream library not supporting them. Contributed by Ryan Cole. ([\#8120](https://github.com/matrix-org/synapse/issues/8120))
- Explain better what GDPR-erased means when deactivating a user. ([\#8189](https://github.com/matrix-org/synapse/issues/8189))
Internal Changes
----------------
- Add filter `name` to the `/users` admin API, which filters by user ID or displayname. Contributed by Awesome Technologies Innovationslabor GmbH. ([\#7377](https://github.com/matrix-org/synapse/issues/7377), [\#8163](https://github.com/matrix-org/synapse/issues/8163))
- Reduce run times of some unit tests by advancing the reactor a fewer number of times. ([\#7757](https://github.com/matrix-org/synapse/issues/7757))
- Don't fail `/submit_token` requests on incorrect session ID if `request_token_inhibit_3pid_errors` is turned on. ([\#7991](https://github.com/matrix-org/synapse/issues/7991))
- Convert various parts of the codebase to async/await. ([\#8071](https://github.com/matrix-org/synapse/issues/8071), [\#8072](https://github.com/matrix-org/synapse/issues/8072), [\#8074](https://github.com/matrix-org/synapse/issues/8074), [\#8075](https://github.com/matrix-org/synapse/issues/8075), [\#8076](https://github.com/matrix-org/synapse/issues/8076), [\#8087](https://github.com/matrix-org/synapse/issues/8087), [\#8100](https://github.com/matrix-org/synapse/issues/8100), [\#8119](https://github.com/matrix-org/synapse/issues/8119), [\#8121](https://github.com/matrix-org/synapse/issues/8121), [\#8133](https://github.com/matrix-org/synapse/issues/8133), [\#8156](https://github.com/matrix-org/synapse/issues/8156), [\#8162](https://github.com/matrix-org/synapse/issues/8162), [\#8166](https://github.com/matrix-org/synapse/issues/8166), [\#8168](https://github.com/matrix-org/synapse/issues/8168), [\#8173](https://github.com/matrix-org/synapse/issues/8173), [\#8191](https://github.com/matrix-org/synapse/issues/8191), [\#8192](https://github.com/matrix-org/synapse/issues/8192), [\#8193](https://github.com/matrix-org/synapse/issues/8193), [\#8194](https://github.com/matrix-org/synapse/issues/8194), [\#8195](https://github.com/matrix-org/synapse/issues/8195), [\#8197](https://github.com/matrix-org/synapse/issues/8197), [\#8199](https://github.com/matrix-org/synapse/issues/8199), [\#8200](https://github.com/matrix-org/synapse/issues/8200), [\#8201](https://github.com/matrix-org/synapse/issues/8201), [\#8202](https://github.com/matrix-org/synapse/issues/8202), [\#8207](https://github.com/matrix-org/synapse/issues/8207), [\#8213](https://github.com/matrix-org/synapse/issues/8213), [\#8214](https://github.com/matrix-org/synapse/issues/8214))
- Remove some unused database functions. ([\#8085](https://github.com/matrix-org/synapse/issues/8085))
- Add type hints to various parts of the codebase. ([\#8090](https://github.com/matrix-org/synapse/issues/8090), [\#8127](https://github.com/matrix-org/synapse/issues/8127), [\#8187](https://github.com/matrix-org/synapse/issues/8187), [\#8241](https://github.com/matrix-org/synapse/issues/8241), [\#8140](https://github.com/matrix-org/synapse/issues/8140), [\#8183](https://github.com/matrix-org/synapse/issues/8183), [\#8232](https://github.com/matrix-org/synapse/issues/8232), [\#8235](https://github.com/matrix-org/synapse/issues/8235), [\#8237](https://github.com/matrix-org/synapse/issues/8237), [\#8244](https://github.com/matrix-org/synapse/issues/8244))
- Return the previous stream token if a non-member event is a duplicate. ([\#8093](https://github.com/matrix-org/synapse/issues/8093), [\#8112](https://github.com/matrix-org/synapse/issues/8112))
- Separate `get_current_token` into two since there are two different use cases for it. ([\#8113](https://github.com/matrix-org/synapse/issues/8113))
- Reduce the amount of whitespace in JSON stored and sent in responses. ([\#8124](https://github.com/matrix-org/synapse/issues/8124))
- Update the test federation client to handle streaming responses. ([\#8130](https://github.com/matrix-org/synapse/issues/8130))
- Micro-optimisations to `get_auth_chain_ids`. ([\#8132](https://github.com/matrix-org/synapse/issues/8132))
- Refactor `StreamIdGenerator` and `MultiWriterIdGenerator` to have the same interface. ([\#8161](https://github.com/matrix-org/synapse/issues/8161))
- Add functions to `MultiWriterIdGen` used by events stream. ([\#8164](https://github.com/matrix-org/synapse/issues/8164), [\#8179](https://github.com/matrix-org/synapse/issues/8179))
- Fix tests that were broken due to the merge of 1.19.1. ([\#8167](https://github.com/matrix-org/synapse/issues/8167))
- Make `SlavedIdTracker.advance` have the same interface as `MultiWriterIDGenerator`. ([\#8171](https://github.com/matrix-org/synapse/issues/8171))
- Remove unused `is_guest` parameter from, and add safeguard to, `MessageHandler.get_room_data`. ([\#8174](https://github.com/matrix-org/synapse/issues/8174), [\#8181](https://github.com/matrix-org/synapse/issues/8181))
- Standardize the mypy configuration. ([\#8175](https://github.com/matrix-org/synapse/issues/8175))
- Refactor some of `LoginRestServlet`'s helper methods, and move them to `AuthHandler` for easier reuse. ([\#8182](https://github.com/matrix-org/synapse/issues/8182))
- Fix `wait_for_stream_position` to allow multiple waiters on same stream ID. ([\#8196](https://github.com/matrix-org/synapse/issues/8196))
- Make `MultiWriterIDGenerator` work for streams that use negative values. ([\#8203](https://github.com/matrix-org/synapse/issues/8203))
- Refactor queries for device keys and cross-signatures. ([\#8204](https://github.com/matrix-org/synapse/issues/8204), [\#8205](https://github.com/matrix-org/synapse/issues/8205), [\#8222](https://github.com/matrix-org/synapse/issues/8222), [\#8224](https://github.com/matrix-org/synapse/issues/8224), [\#8225](https://github.com/matrix-org/synapse/issues/8225), [\#8231](https://github.com/matrix-org/synapse/issues/8231), [\#8233](https://github.com/matrix-org/synapse/issues/8233), [\#8234](https://github.com/matrix-org/synapse/issues/8234))
- Fix type hints for functions decorated with `@cached`. ([\#8240](https://github.com/matrix-org/synapse/issues/8240))
- Remove obsolete `order` field from federation send queues. ([\#8245](https://github.com/matrix-org/synapse/issues/8245))
- Stop sub-classing from object. ([\#8249](https://github.com/matrix-org/synapse/issues/8249))
- Add more logging to debug slow startup. ([\#8264](https://github.com/matrix-org/synapse/issues/8264))
- Do not attempt to upgrade database schema on worker processes. ([\#8266](https://github.com/matrix-org/synapse/issues/8266), [\#8276](https://github.com/matrix-org/synapse/issues/8276))
Synapse 1.19.1 (2020-08-27)
===========================
No significant changes.
Synapse 1.19.1rc1 (2020-08-25)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.19.0 where appservices with ratelimiting disabled would still be ratelimited when joining rooms. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix a bug introduced in v1.19.0 that would cause e.g. profile updates to fail due to incorrect application of rate limits on join requests. ([\#8153](https://github.com/matrix-org/synapse/issues/8153))
Synapse 1.19.0 (2020-08-17)
===========================
No significant changes since 1.19.0rc1.
Removal warning
---------------
As outlined in the [previous release](https://github.com/matrix-org/synapse/releases/tag/v1.18.0), we are no longer publishing Docker images with the `-py3` tag suffix. On top of that, we have also removed the `latest-py3` tag. Please see [the announcement in the upgrade notes for 1.18.0](https://github.com/matrix-org/synapse/blob/develop/UPGRADE.rst#upgrading-to-v1180).
Synapse 1.19.0rc1 (2020-08-13)
==============================
Features
--------
- Add option to allow server admins to join rooms which fail complexity checks. Contributed by @lugino-emeritus. ([\#7902](https://github.com/matrix-org/synapse/issues/7902))
- Add an option to purge room or not with delete room admin endpoint (`POST /_synapse/admin/v1/rooms/<room_id>/delete`). Contributed by @dklimpel. ([\#7964](https://github.com/matrix-org/synapse/issues/7964))
- Add rate limiting to users joining rooms. ([\#8008](https://github.com/matrix-org/synapse/issues/8008))
- Add a `/health` endpoint to every configured HTTP listener that can be used as a health check endpoint by load balancers. ([\#8048](https://github.com/matrix-org/synapse/issues/8048))
- Allow login to be blocked based on the values of SAML attributes. ([\#8052](https://github.com/matrix-org/synapse/issues/8052))
- Allow guest access to the `GET /_matrix/client/r0/rooms/{room_id}/members` endpoint, according to MSC2689. Contributed by Awesome Technologies Innovationslabor GmbH. ([\#7314](https://github.com/matrix-org/synapse/issues/7314))
Bugfixes
--------
- Fix a bug introduced in Synapse v1.7.2 which caused inaccurate membership counts in the room directory. ([\#7977](https://github.com/matrix-org/synapse/issues/7977))
- Fix a long standing bug: 'Duplicate key value violates unique constraint "event_relations_id"' when message retention is configured. ([\#7978](https://github.com/matrix-org/synapse/issues/7978))
- Fix "no create event in auth events" when trying to reject invitation after inviter leaves. Bug introduced in Synapse v1.10.0. ([\#7980](https://github.com/matrix-org/synapse/issues/7980))
- Fix various comments and minor discrepencies in server notices code. ([\#7996](https://github.com/matrix-org/synapse/issues/7996))
- Fix a long standing bug where HTTP HEAD requests resulted in a 400 error. ([\#7999](https://github.com/matrix-org/synapse/issues/7999))
- Fix a long-standing bug which caused two copies of some log lines to be written when synctl was used along with a MemoryHandler logger. ([\#8011](https://github.com/matrix-org/synapse/issues/8011), [\#8012](https://github.com/matrix-org/synapse/issues/8012))
Updates to the Docker image
---------------------------
- We no longer publish Docker images with the `-py3` tag suffix, as [announced in the upgrade notes](https://github.com/matrix-org/synapse/blob/develop/UPGRADE.rst#upgrading-to-v1180). ([\#8056](https://github.com/matrix-org/synapse/issues/8056))
Improved Documentation
----------------------
- Document how to set up a client .well-known file and fix several pieces of outdated documentation. ([\#7899](https://github.com/matrix-org/synapse/issues/7899))
- Fix typo in `docs/workers.md`. ([\#7992](https://github.com/matrix-org/synapse/issues/7992))
- Add documentation for how to undo a room shutdown. ([\#7998](https://github.com/matrix-org/synapse/issues/7998), [\#8010](https://github.com/matrix-org/synapse/issues/8010))
Internal Changes
----------------
- Reduce the amount of whitespace in JSON stored and sent in responses. Contributed by David Vo. ([\#7372](https://github.com/matrix-org/synapse/issues/7372))
- Switch to the JSON implementation from the standard library and bump the minimum version of the canonicaljson library to 1.2.0. ([\#7936](https://github.com/matrix-org/synapse/issues/7936), [\#7979](https://github.com/matrix-org/synapse/issues/7979))
- Convert various parts of the codebase to async/await. ([\#7947](https://github.com/matrix-org/synapse/issues/7947), [\#7948](https://github.com/matrix-org/synapse/issues/7948), [\#7949](https://github.com/matrix-org/synapse/issues/7949), [\#7951](https://github.com/matrix-org/synapse/issues/7951), [\#7963](https://github.com/matrix-org/synapse/issues/7963), [\#7973](https://github.com/matrix-org/synapse/issues/7973), [\#7975](https://github.com/matrix-org/synapse/issues/7975), [\#7976](https://github.com/matrix-org/synapse/issues/7976), [\#7981](https://github.com/matrix-org/synapse/issues/7981), [\#7987](https://github.com/matrix-org/synapse/issues/7987), [\#7989](https://github.com/matrix-org/synapse/issues/7989), [\#8003](https://github.com/matrix-org/synapse/issues/8003), [\#8014](https://github.com/matrix-org/synapse/issues/8014), [\#8016](https://github.com/matrix-org/synapse/issues/8016), [\#8027](https://github.com/matrix-org/synapse/issues/8027), [\#8031](https://github.com/matrix-org/synapse/issues/8031), [\#8032](https://github.com/matrix-org/synapse/issues/8032), [\#8035](https://github.com/matrix-org/synapse/issues/8035), [\#8042](https://github.com/matrix-org/synapse/issues/8042), [\#8044](https://github.com/matrix-org/synapse/issues/8044), [\#8045](https://github.com/matrix-org/synapse/issues/8045), [\#8061](https://github.com/matrix-org/synapse/issues/8061), [\#8062](https://github.com/matrix-org/synapse/issues/8062), [\#8063](https://github.com/matrix-org/synapse/issues/8063), [\#8066](https://github.com/matrix-org/synapse/issues/8066), [\#8069](https://github.com/matrix-org/synapse/issues/8069), [\#8070](https://github.com/matrix-org/synapse/issues/8070))
- Move some database-related log lines from the default logger to the database/transaction loggers. ([\#7952](https://github.com/matrix-org/synapse/issues/7952))
- Add a script to detect source code files using non-unix line terminators. ([\#7965](https://github.com/matrix-org/synapse/issues/7965), [\#7970](https://github.com/matrix-org/synapse/issues/7970))
- Log the SAML session ID during creation. ([\#7971](https://github.com/matrix-org/synapse/issues/7971))
- Implement new experimental push rules for some users. ([\#7997](https://github.com/matrix-org/synapse/issues/7997))
- Remove redundant and unreliable signature check for v1 Identity Service lookup responses. ([\#8001](https://github.com/matrix-org/synapse/issues/8001))
- Improve the performance of the register endpoint. ([\#8009](https://github.com/matrix-org/synapse/issues/8009))
- Reduce less useful output in the newsfragment CI step. Add a link to the changelog section of the contributing guide on error. ([\#8024](https://github.com/matrix-org/synapse/issues/8024))
- Rename storage layer objects to be more sensible. ([\#8033](https://github.com/matrix-org/synapse/issues/8033))
- Change the default log config to reduce disk I/O and storage for new servers. ([\#8040](https://github.com/matrix-org/synapse/issues/8040))
- Add an assertion on `prev_events` in `create_new_client_event`. ([\#8041](https://github.com/matrix-org/synapse/issues/8041))
- Add a comment to `ServerContextFactory` about the use of `SSLv23_METHOD`. ([\#8043](https://github.com/matrix-org/synapse/issues/8043))
- Log `OPTIONS` requests at `DEBUG` rather than `INFO` level to reduce amount logged at `INFO`. ([\#8049](https://github.com/matrix-org/synapse/issues/8049))
- Reduce amount of outbound request logging at `INFO` level. ([\#8050](https://github.com/matrix-org/synapse/issues/8050))
- It is no longer necessary to explicitly define `filters` in the logging configuration. (Continuing to do so is redundant but harmless.) ([\#8051](https://github.com/matrix-org/synapse/issues/8051))
- Add and improve type hints. ([\#8058](https://github.com/matrix-org/synapse/issues/8058), [\#8064](https://github.com/matrix-org/synapse/issues/8064), [\#8060](https://github.com/matrix-org/synapse/issues/8060), [\#8067](https://github.com/matrix-org/synapse/issues/8067))
Synapse 1.18.0 (2020-07-30)
===========================
Deprecation Warnings
--------------------
### Docker Tags with `-py3` Suffix
From 10th August 2020, we will no longer publish Docker images with the `-py3` tag suffix. The images tagged with the `-py3` suffix have been identical to the non-suffixed tags since release 0.99.0, and the suffix is obsolete.
On 10th August, we will remove the `latest-py3` tag. Existing per-release tags (such as `v1.18.0-py3`) will not be removed, but no new `-py3` tags will be added.
Scripts relying on the `-py3` suffix will need to be updated.
### TCP-based Replication
When setting up worker processes, we now recommend the use of a Redis server for replication. The old direct TCP connection method is deprecated and will be removed in a future release. See [docs/workers.md](https://github.com/matrix-org/synapse/blob/release-v1.18.0/docs/workers.md) for more details.
Improved Documentation
----------------------
- Update worker docs with latest enhancements. ([\#7969](https://github.com/matrix-org/synapse/issues/7969))
Synapse 1.18.0rc2 (2020-07-28)
==============================
Bugfixes
--------
- Fix an `AssertionError` exception introduced in v1.18.0rc1. ([\#7876](https://github.com/matrix-org/synapse/issues/7876))
- Fix experimental support for moving typing off master when worker is restarted, which is broken in v1.18.0rc1. ([\#7967](https://github.com/matrix-org/synapse/issues/7967))
Internal Changes
----------------
- Further optimise queueing of inbound replication commands. ([\#7876](https://github.com/matrix-org/synapse/issues/7876))
Synapse 1.18.0rc1 (2020-07-27)
==============================
Features
--------
- Include room states on invite events that are sent to application services. Contributed by @Sorunome. ([\#6455](https://github.com/matrix-org/synapse/issues/6455))
- Add experimental support for running multiple federation sender processes. ([\#7798](https://github.com/matrix-org/synapse/issues/7798))
- Add the option to validate the `iss` and `aud` claims for JWT logins. ([\#7827](https://github.com/matrix-org/synapse/issues/7827))
- Add support for handling registration requests across multiple client reader workers. ([\#7830](https://github.com/matrix-org/synapse/issues/7830))
- Add an admin API to list the users in a room. Contributed by Awesome Technologies Innovationslabor GmbH. ([\#7842](https://github.com/matrix-org/synapse/issues/7842))
- Allow email subjects to be customised through Synapse's configuration. ([\#7846](https://github.com/matrix-org/synapse/issues/7846))
- Add the ability to re-activate an account from the admin API. ([\#7847](https://github.com/matrix-org/synapse/issues/7847), [\#7908](https://github.com/matrix-org/synapse/issues/7908))
- Add experimental support for running multiple pusher workers. ([\#7855](https://github.com/matrix-org/synapse/issues/7855))
- Add experimental support for moving typing off master. ([\#7869](https://github.com/matrix-org/synapse/issues/7869), [\#7959](https://github.com/matrix-org/synapse/issues/7959))
- Report CPU metrics to prometheus for time spent processing replication commands. ([\#7879](https://github.com/matrix-org/synapse/issues/7879))
- Support oEmbed for media previews. ([\#7920](https://github.com/matrix-org/synapse/issues/7920))
- Abort federation requests where the client disconnects before the ratelimiter expires. ([\#7930](https://github.com/matrix-org/synapse/issues/7930))
- Cache responses to `/_matrix/federation/v1/state_ids` to reduce duplicated work. ([\#7931](https://github.com/matrix-org/synapse/issues/7931))
Bugfixes
--------
- Fix detection of out of sync remote device lists when receiving events from remote users. ([\#7815](https://github.com/matrix-org/synapse/issues/7815))
- Fix bug where Synapse fails to process an incoming event over federation if the server is missing too much of the event's auth chain. ([\#7817](https://github.com/matrix-org/synapse/issues/7817))
- Fix a bug causing Synapse to misinterpret the value `off` for `encryption_enabled_by_default_for_room_type` in its configuration file(s) if that value isn't surrounded by quotes. This bug was introduced in v1.16.0. ([\#7822](https://github.com/matrix-org/synapse/issues/7822))
- Fix bug where we did not always pass in `app_name` or `server_name` to email templates, including e.g. for registration emails. ([\#7829](https://github.com/matrix-org/synapse/issues/7829))
- Errors which occur while using the non-standard JWT login now return the proper error: `403 Forbidden` with an error code of `M_FORBIDDEN`. ([\#7844](https://github.com/matrix-org/synapse/issues/7844))
- Fix "AttributeError: 'str' object has no attribute 'get'" error message when applying per-room message retention policies. The bug was introduced in Synapse 1.7.0. ([\#7850](https://github.com/matrix-org/synapse/issues/7850))
- Fix a bug introduced in Synapse 1.10.0 which could cause a "no create event in auth events" error during room creation. ([\#7854](https://github.com/matrix-org/synapse/issues/7854))
- Fix a bug which allowed empty rooms to be rejoined over federation. ([\#7859](https://github.com/matrix-org/synapse/issues/7859))
- Fix 'Unable to find a suitable guest user ID' error when using multiple client_reader workers. ([\#7866](https://github.com/matrix-org/synapse/issues/7866))
- Fix a long standing bug where the tracing of async functions with opentracing was broken. ([\#7872](https://github.com/matrix-org/synapse/issues/7872), [\#7961](https://github.com/matrix-org/synapse/issues/7961))
- Fix "TypeError in `synapse.notifier`" exceptions. ([\#7880](https://github.com/matrix-org/synapse/issues/7880))
- Fix deprecation warning due to invalid escape sequences. ([\#7895](https://github.com/matrix-org/synapse/issues/7895))
Updates to the Docker image
---------------------------
- Base docker image on Debian Buster rather than Alpine Linux. Contributed by @maquis196. ([\#7839](https://github.com/matrix-org/synapse/issues/7839))
Improved Documentation
----------------------
- Provide instructions on using `register_new_matrix_user` via docker. ([\#7885](https://github.com/matrix-org/synapse/issues/7885))
- Change the sample config postgres user section to use `synapse_user` instead of `synapse` to align with the documentation. ([\#7889](https://github.com/matrix-org/synapse/issues/7889))
- Reorder database paragraphs to promote postgres over sqlite. ([\#7933](https://github.com/matrix-org/synapse/issues/7933))
- Update the dates of ACME v1's end of life in [`ACME.md`](https://github.com/matrix-org/synapse/blob/master/docs/ACME.md). ([\#7934](https://github.com/matrix-org/synapse/issues/7934))
- Remove Ubuntu Eoan from the list of `.deb` packages that we build as it is now end-of-life. Contributed by @gary-kim. ([\#7888](https://github.com/matrix-org/synapse/issues/7888))
Internal Changes
----------------
- Switch parts of the codebase from `simplejson` to the standard library `json`. ([\#7802](https://github.com/matrix-org/synapse/issues/7802))
- Add type hints to the http server code and remove an unused parameter. ([\#7813](https://github.com/matrix-org/synapse/issues/7813))
- Add type hints to synapse.api.errors module. ([\#7820](https://github.com/matrix-org/synapse/issues/7820))
- Ensure that calls to `json.dumps` are compatible with the standard library json. ([\#7836](https://github.com/matrix-org/synapse/issues/7836))
- Remove redundant `retry_on_integrity_error` wrapper for event persistence code. ([\#7848](https://github.com/matrix-org/synapse/issues/7848))
- Consistently use `db_to_json` to convert from database values to JSON objects. ([\#7849](https://github.com/matrix-org/synapse/issues/7849))
- Convert various parts of the codebase to async/await. ([\#7851](https://github.com/matrix-org/synapse/issues/7851), [\#7860](https://github.com/matrix-org/synapse/issues/7860), [\#7868](https://github.com/matrix-org/synapse/issues/7868), [\#7871](https://github.com/matrix-org/synapse/issues/7871), [\#7873](https://github.com/matrix-org/synapse/issues/7873), [\#7874](https://github.com/matrix-org/synapse/issues/7874), [\#7884](https://github.com/matrix-org/synapse/issues/7884), [\#7912](https://github.com/matrix-org/synapse/issues/7912), [\#7935](https://github.com/matrix-org/synapse/issues/7935), [\#7939](https://github.com/matrix-org/synapse/issues/7939), [\#7942](https://github.com/matrix-org/synapse/issues/7942), [\#7944](https://github.com/matrix-org/synapse/issues/7944))
- Add support for handling registration requests across multiple client reader workers. ([\#7853](https://github.com/matrix-org/synapse/issues/7853))
- Small performance improvement in typing processing. ([\#7856](https://github.com/matrix-org/synapse/issues/7856))
- The default value of `filter_timeline_limit` was changed from -1 (no limit) to 100. ([\#7858](https://github.com/matrix-org/synapse/issues/7858))
- Optimise queueing of inbound replication commands. ([\#7861](https://github.com/matrix-org/synapse/issues/7861))
- Add some type annotations to `HomeServer` and `BaseHandler`. ([\#7870](https://github.com/matrix-org/synapse/issues/7870))
- Clean up `PreserveLoggingContext`. ([\#7877](https://github.com/matrix-org/synapse/issues/7877))
- Change "unknown room version" logging from 'error' to 'warning'. ([\#7881](https://github.com/matrix-org/synapse/issues/7881))
- Stop using `device_max_stream_id` table and just use `device_inbox.stream_id`. ([\#7882](https://github.com/matrix-org/synapse/issues/7882))
- Return an empty body for OPTIONS requests. ([\#7886](https://github.com/matrix-org/synapse/issues/7886))
- Fix typo in generated config file. Contributed by @ThiefMaster. ([\#7890](https://github.com/matrix-org/synapse/issues/7890))
- Import ABC from `collections.abc` for Python 3.10 compatibility. ([\#7892](https://github.com/matrix-org/synapse/issues/7892))
and `get_previous_frame` from `synapse.logging.utils` module. ([\#7897](https://github.com/matrix-org/synapse/issues/7897))
- Lint the `contrib/` directory in CI and linting scripts, add `synctl` to the linting script for consistency with CI. ([\#7914](https://github.com/matrix-org/synapse/issues/7914))
- Use Element CSS and logo in notification emails when app name is Element. ([\#7919](https://github.com/matrix-org/synapse/issues/7919))
- Optimisation to /sync handling: skip serializing the response if the client has already disconnected. ([\#7927](https://github.com/matrix-org/synapse/issues/7927))
- When a client disconnects, don't log it as 'Error processing request'. ([\#7928](https://github.com/matrix-org/synapse/issues/7928))
- Add debugging to `/sync` response generation (disabled by default). ([\#7929](https://github.com/matrix-org/synapse/issues/7929))
- Update comments that refer to Deferreds for async functions. ([\#7945](https://github.com/matrix-org/synapse/issues/7945))
- Simplify error handling in federation handler. ([\#7950](https://github.com/matrix-org/synapse/issues/7950))
Synapse 1.17.0 (2020-07-13)
===========================
Synapse 1.17.0 is identical to 1.17.0rc1, with the addition of the fix that was included in 1.16.1.
Synapse 1.16.1 (2020-07-10)
===========================
In some distributions of Synapse 1.16.0, we incorrectly included a database migration which added a new, unused table. This release removes the redundant table.
Bugfixes
--------
- Drop table `local_rejections_stream` which was incorrectly added in Synapse 1.16.0. ([\#7816](https://github.com/matrix-org/synapse/issues/7816), [b1beb3ff5](https://github.com/matrix-org/synapse/commit/b1beb3ff5))
Synapse 1.17.0rc1 (2020-07-09)
==============================
Bugfixes
--------
- Fix inconsistent handling of upper and lower case in email addresses when used as identifiers for login, etc. Contributed by @dklimpel. ([\#7021](https://github.com/matrix-org/synapse/issues/7021))
- Fix "Tried to close a non-active scope!" error messages when opentracing is enabled. ([\#7732](https://github.com/matrix-org/synapse/issues/7732))
- Fix incorrect error message when database CTYPE was set incorrectly. ([\#7760](https://github.com/matrix-org/synapse/issues/7760))
- Fix to not ignore `set_tweak` actions in Push Rules that have no `value`, as permitted by the specification. ([\#7766](https://github.com/matrix-org/synapse/issues/7766))
- Fix synctl to handle empty config files correctly. Contributed by @kotovalexarian. ([\#7779](https://github.com/matrix-org/synapse/issues/7779))
- Fixes a long standing bug in worker mode where worker information was saved in the devices table instead of the original IP address and user agent. ([\#7797](https://github.com/matrix-org/synapse/issues/7797))
- Fix 'stuck invites' which happen when we are unable to reject a room invite received over federation. ([\#7804](https://github.com/matrix-org/synapse/issues/7804), [\#7809](https://github.com/matrix-org/synapse/issues/7809), [\#7810](https://github.com/matrix-org/synapse/issues/7810))
Updates to the Docker image
---------------------------
- Include libwebp in the Docker file to properly handle webp image uploads. ([\#7791](https://github.com/matrix-org/synapse/issues/7791))
Improved Documentation
----------------------
- Improve the documentation of the non-standard JSON web token login type. ([\#7776](https://github.com/matrix-org/synapse/issues/7776))
- Update doc links for caddy. Contributed by Nicolai Søborg. ([\#7789](https://github.com/matrix-org/synapse/issues/7789))
Internal Changes
----------------
- Refactor getting replication updates from database. ([\#7740](https://github.com/matrix-org/synapse/issues/7740))
- Send push notifications with a high or low priority depending upon whether they may generate user-observable effects. ([\#7765](https://github.com/matrix-org/synapse/issues/7765))
- Use symbolic names for replication stream names. ([\#7768](https://github.com/matrix-org/synapse/issues/7768))
- Add early returns to `_check_for_soft_fail`. ([\#7769](https://github.com/matrix-org/synapse/issues/7769))
- Fix up `synapse.handlers.federation` to pass mypy. ([\#7770](https://github.com/matrix-org/synapse/issues/7770))
- Convert the appserver handler to async/await. ([\#7775](https://github.com/matrix-org/synapse/issues/7775))
- Allow to use higher versions of prometheus_client <0.9.0 which are expected to introduce no breaking changes. Contributed by Oliver Kurz. ([\#7780](https://github.com/matrix-org/synapse/issues/7780))
- Update linting scripts and codebase to be compatible with `isort` v5. ([\#7786](https://github.com/matrix-org/synapse/issues/7786))
- Ensure that strings (not bytes) are passed into JSON serialization. ([\#7799](https://github.com/matrix-org/synapse/issues/7799))
- Switch from simplejson to the standard library json. ([\#7800](https://github.com/matrix-org/synapse/issues/7800))
- Add `signing_key` property to `HomeServer` to save code duplication. ([\#7805](https://github.com/matrix-org/synapse/issues/7805))
- Improve stacktraces from exceptions in background processes. ([\#7808](https://github.com/matrix-org/synapse/issues/7808))
- Fix various spelling errors in comments and log lines. ([\#7811](https://github.com/matrix-org/synapse/issues/7811))
Synapse 1.16.0 (2020-07-08)
===========================
No significant changes since 1.16.0rc2.
Note that this release deprecates the `m.login.jwt` login method, renaming it
to `org.matrix.login.jwt`, as `m.login.jwt` is not part of the Matrix spec.
Otherwise the behaviour is identical. Synapse will accept both names for now,
but this may change in a future release.
Synapse 1.16.0rc2 (2020-07-02)
==============================
Synapse 1.16.0rc2 includes the security fixes released with Synapse 1.15.2.
Please see [below](#synapse-1152-2020-07-02) for more details.
Improved Documentation
----------------------
- Update postgres image in example `docker-compose.yaml` to tag `12-alpine`. ([\#7696](https://github.com/matrix-org/synapse/issues/7696))
Internal Changes
----------------
- Add some metrics for inbound and outbound federation latencies: `synapse_federation_server_pdu_process_time` and `synapse_event_processing_lag_by_event`. ([\#7771](https://github.com/matrix-org/synapse/issues/7771))
Synapse 1.15.2 (2020-07-02)
===========================
Due to the two security issues highlighted below, server administrators are
encouraged to update Synapse. We are not aware of these vulnerabilities being
exploited in the wild.
Security advisory
-----------------
* A malicious homeserver could force Synapse to reset the state in a room to a
small subset of the correct state. This affects all Synapse deployments which
federate with untrusted servers. ([96e9afe6](https://github.com/matrix-org/synapse/commit/96e9afe62500310977dc3cbc99a8d16d3d2fa15c))
* HTML pages served via Synapse were vulnerable to clickjacking attacks. This
predominantly affects homeservers with single-sign-on enabled, but all server
administrators are encouraged to upgrade. ([ea26e9a9](https://github.com/matrix-org/synapse/commit/ea26e9a98b0541fc886a1cb826a38352b7599dbe))
This was reported by [Quentin Gliech](https://sandhose.fr/).
Synapse 1.16.0rc1 (2020-07-01)
==============================
Features
--------
- Add an option to enable encryption by default for new rooms. ([\#7639](https://github.com/matrix-org/synapse/issues/7639))
- Add support for running multiple media repository workers. See [docs/workers.md](https://github.com/matrix-org/synapse/blob/release-v1.16.0/docs/workers.md) for instructions. ([\#7706](https://github.com/matrix-org/synapse/issues/7706))
- Media can now be marked as safe from quarantined. ([\#7718](https://github.com/matrix-org/synapse/issues/7718))
- Expand the configuration options for auto-join rooms. ([\#7763](https://github.com/matrix-org/synapse/issues/7763))
Bugfixes
--------
- Remove `user_id` from the response to `GET /_matrix/client/r0/presence/{userId}/status` to match the specification. ([\#7606](https://github.com/matrix-org/synapse/issues/7606))
- In worker mode, ensure that replicated data has not already been received. ([\#7648](https://github.com/matrix-org/synapse/issues/7648))
- Fix intermittent exception during startup, introduced in Synapse 1.14.0. ([\#7663](https://github.com/matrix-org/synapse/issues/7663))
- Include a user-agent for federation and well-known requests. ([\#7677](https://github.com/matrix-org/synapse/issues/7677))
- Accept the proper field (`phone`) for the `m.id.phone` identifier type. The legacy field of `number` is still accepted as a fallback. Bug introduced in v0.20.0. ([\#7687](https://github.com/matrix-org/synapse/issues/7687))
- Fix "Starting db txn 'get_completed_ui_auth_stages' from sentinel context" warning. The bug was introduced in 1.13.0. ([\#7688](https://github.com/matrix-org/synapse/issues/7688))
- Compare the URI and method during user interactive authentication (instead of the URI twice). Bug introduced in 1.13.0. ([\#7689](https://github.com/matrix-org/synapse/issues/7689))
- Fix a long standing bug where the response to the `GET room_keys/version` endpoint had the incorrect type for the `etag` field. ([\#7691](https://github.com/matrix-org/synapse/issues/7691))
- Fix logged error during device resync in opentracing. Broke in v1.14.0. ([\#7698](https://github.com/matrix-org/synapse/issues/7698))
- Do not break push rule evaluation when receiving an event with a non-string body. This is a long-standing bug. ([\#7701](https://github.com/matrix-org/synapse/issues/7701))
- Fixs a long standing bug which resulted in an exception: "TypeError: argument of type 'ObservableDeferred' is not iterable". ([\#7708](https://github.com/matrix-org/synapse/issues/7708))
- The `synapse_port_db` script no longer fails when the `ui_auth_sessions` table is non-empty. This bug has existed since v1.13.0. ([\#7711](https://github.com/matrix-org/synapse/issues/7711))
- Synapse will now fetch media from the proper specified URL (using the r0 prefix instead of the unspecified v1). ([\#7714](https://github.com/matrix-org/synapse/issues/7714))
- Fix the tables ignored by `synapse_port_db` to be in sync the current database schema. ([\#7717](https://github.com/matrix-org/synapse/issues/7717))
- Fix missing `Content-Length` on HTTP responses from the metrics handler. ([\#7730](https://github.com/matrix-org/synapse/issues/7730))
- Fix large state resolutions from stalling Synapse for seconds at a time. ([\#7735](https://github.com/matrix-org/synapse/issues/7735), [\#7746](https://github.com/matrix-org/synapse/issues/7746))
Improved Documentation
----------------------
- Spelling correction in sample_config.yaml. ([\#7652](https://github.com/matrix-org/synapse/issues/7652))
- Added instructions for how to use Keycloak via OpenID Connect to authenticate with Synapse. ([\#7659](https://github.com/matrix-org/synapse/issues/7659))
- Corrected misspelling of PostgreSQL. ([\#7724](https://github.com/matrix-org/synapse/issues/7724))
Deprecations and Removals
-------------------------
- Deprecate `m.login.jwt` login method in favour of `org.matrix.login.jwt`, as `m.login.jwt` is not part of the Matrix spec. ([\#7675](https://github.com/matrix-org/synapse/issues/7675))
Internal Changes
----------------
- Refactor getting replication updates from database. ([\#7636](https://github.com/matrix-org/synapse/issues/7636))
- Clean-up the login fallback code. ([\#7657](https://github.com/matrix-org/synapse/issues/7657))
- Increase the default SAML session expiry time to 15 minutes. ([\#7664](https://github.com/matrix-org/synapse/issues/7664))
- Convert the device message and pagination handlers to async/await. ([\#7678](https://github.com/matrix-org/synapse/issues/7678))
- Convert typing handler to async/await. ([\#7679](https://github.com/matrix-org/synapse/issues/7679))
- Require `parameterized` package version to be at least 0.7.0. ([\#7680](https://github.com/matrix-org/synapse/issues/7680))
- Refactor handling of `listeners` configuration settings. ([\#7681](https://github.com/matrix-org/synapse/issues/7681))
- Replace uses of `six.iterkeys`/`iteritems`/`itervalues` with `keys()`/`items()`/`values()`. ([\#7692](https://github.com/matrix-org/synapse/issues/7692))
- Add support for using `rust-python-jaeger-reporter` library to reduce jaeger tracing overhead. ([\#7697](https://github.com/matrix-org/synapse/issues/7697))
- Make Tox actions work on Debian 10. ([\#7703](https://github.com/matrix-org/synapse/issues/7703))
- Replace all remaining uses of `six` with native Python 3 equivalents. Contributed by @ilmari. ([\#7704](https://github.com/matrix-org/synapse/issues/7704))
- Fix broken link in sample config. ([\#7712](https://github.com/matrix-org/synapse/issues/7712))
- Speed up state res v2 across large state differences. ([\#7725](https://github.com/matrix-org/synapse/issues/7725))
- Convert directory handler to async/await. ([\#7727](https://github.com/matrix-org/synapse/issues/7727))
- Move `flake8` to the end of `scripts-dev/lint.sh` as it takes the longest and could cause the script to exit early. ([\#7738](https://github.com/matrix-org/synapse/issues/7738))
- Explain the "test" conditional requirement for dependencies is not all of the modules necessary to run the unit tests. ([\#7751](https://github.com/matrix-org/synapse/issues/7751))
- Add some metrics for inbound and outbound federation latencies: `synapse_federation_server_pdu_process_time` and `synapse_event_processing_lag_by_event`. ([\#7755](https://github.com/matrix-org/synapse/issues/7755))
Synapse 1.15.1 (2020-06-16)
===========================
Bugfixes
--------
- Fix a bug introduced in v1.15.0 that would crash Synapse on start when using certain password auth providers. ([\#7684](https://github.com/matrix-org/synapse/issues/7684))
- Fix a bug introduced in v1.15.0 which meant that some 3PID management endpoints were not accessible on the correct URL. ([\#7685](https://github.com/matrix-org/synapse/issues/7685))
Synapse 1.15.0 (2020-06-11)
===========================
No significant changes.
Synapse 1.15.0rc1 (2020-06-09)
==============================
Features
--------
- Advertise support for Client-Server API r0.6.0 and remove related unstable feature flags. ([\#6585](https://github.com/matrix-org/synapse/issues/6585))
- Add an option to disable autojoining rooms for guest accounts. ([\#6637](https://github.com/matrix-org/synapse/issues/6637))
- For SAML authentication, add the ability to pass email addresses to be added to new users' accounts via SAML attributes. Contributed by Christopher Cooper. ([\#7385](https://github.com/matrix-org/synapse/issues/7385))
- Add admin APIs to allow server admins to manage users' devices. Contributed by @dklimpel. ([\#7481](https://github.com/matrix-org/synapse/issues/7481))
- Add support for generating thumbnails for WebP images. Previously, users would see an empty box instead of preview image. Contributed by @WGH-. ([\#7586](https://github.com/matrix-org/synapse/issues/7586))
- Support the standardized `m.login.sso` user-interactive authentication flow. ([\#7630](https://github.com/matrix-org/synapse/issues/7630))
Bugfixes
--------
- Allow new users to be registered via the admin API even if the monthly active user limit has been reached. Contributed by @dklimpel. ([\#7263](https://github.com/matrix-org/synapse/issues/7263))
- Fix email notifications not being enabled for new users when created via the Admin API. ([\#7267](https://github.com/matrix-org/synapse/issues/7267))
- Fix str placeholders in an instance of `PrepareDatabaseException`. Introduced in Synapse v1.8.0. ([\#7575](https://github.com/matrix-org/synapse/issues/7575))
- Fix a bug in automatic user creation during first time login with `m.login.jwt`. Regression in v1.6.0. Contributed by @olof. ([\#7585](https://github.com/matrix-org/synapse/issues/7585))
- Fix a bug causing the cross-signing keys to be ignored when resyncing a device list. ([\#7594](https://github.com/matrix-org/synapse/issues/7594))
- Fix metrics failing when there is a large number of active background processes. ([\#7597](https://github.com/matrix-org/synapse/issues/7597))
- Fix bug where returning rooms for a group would fail if it included a room that the server was not in. ([\#7599](https://github.com/matrix-org/synapse/issues/7599))
- Fix duplicate key violation when persisting read markers. ([\#7607](https://github.com/matrix-org/synapse/issues/7607))
- Prevent an entire iteration of the device list resync loop from failing if one server responds with a malformed result. ([\#7609](https://github.com/matrix-org/synapse/issues/7609))
- Fix exceptions when fetching events from a remote host fails. ([\#7622](https://github.com/matrix-org/synapse/issues/7622))
- Make `synctl restart` start synapse if it wasn't running. ([\#7624](https://github.com/matrix-org/synapse/issues/7624))
- Pass device information through to the login endpoint when using the login fallback. ([\#7629](https://github.com/matrix-org/synapse/issues/7629))
- Advertise the `m.login.token` login flow when OpenID Connect is enabled. ([\#7631](https://github.com/matrix-org/synapse/issues/7631))
- Fix bug in account data replication stream. ([\#7656](https://github.com/matrix-org/synapse/issues/7656))
Improved Documentation
----------------------
- Update the OpenBSD installation instructions. ([\#7587](https://github.com/matrix-org/synapse/issues/7587))
- Advertise Python 3.8 support in `setup.py`. ([\#7602](https://github.com/matrix-org/synapse/issues/7602))
- Add a link to `#synapse:matrix.org` in the troubleshooting section of the README. ([\#7603](https://github.com/matrix-org/synapse/issues/7603))
- Clarifications to the admin api documentation. ([\#7647](https://github.com/matrix-org/synapse/issues/7647))
Internal Changes
----------------
- Convert the identity handler to async/await. ([\#7561](https://github.com/matrix-org/synapse/issues/7561))
- Improve query performance for fetching state from a PostgreSQL database. Contributed by @ilmari. ([\#7567](https://github.com/matrix-org/synapse/issues/7567))
- Speed up processing of federation stream RDATA rows. ([\#7584](https://github.com/matrix-org/synapse/issues/7584))
- Add comment to systemd example to show postgresql dependency. ([\#7591](https://github.com/matrix-org/synapse/issues/7591))
- Refactor `Ratelimiter` to limit the amount of expensive config value accesses. ([\#7595](https://github.com/matrix-org/synapse/issues/7595))
- Convert groups handlers to async/await. ([\#7600](https://github.com/matrix-org/synapse/issues/7600))
- Clean up exception handling in `SAML2ResponseResource`. ([\#7614](https://github.com/matrix-org/synapse/issues/7614))
- Check that all asynchronous tasks succeed and general cleanup of `MonthlyActiveUsersTestCase` and `TestMauLimit`. ([\#7619](https://github.com/matrix-org/synapse/issues/7619))
- Convert `get_user_id_by_threepid` to async/await. ([\#7620](https://github.com/matrix-org/synapse/issues/7620))
- Switch to upstream `dh-virtualenv` rather than our fork for Debian package builds. ([\#7621](https://github.com/matrix-org/synapse/issues/7621))
- Update CI scripts to check the number in the newsfile fragment. ([\#7623](https://github.com/matrix-org/synapse/issues/7623))
- Check if the localpart of a Matrix ID is reserved for guest users earlier in the registration flow, as well as when responding to requests to `/register/available`. ([\#7625](https://github.com/matrix-org/synapse/issues/7625))
- Minor cleanups to OpenID Connect integration. ([\#7628](https://github.com/matrix-org/synapse/issues/7628))
- Attempt to fix flaky test: `PhoneHomeStatsTestCase.test_performance_100`. ([\#7634](https://github.com/matrix-org/synapse/issues/7634))
- Fix typos of `m.olm.curve25519-aes-sha2` and `m.megolm.v1.aes-sha2` in comments, test files. ([\#7637](https://github.com/matrix-org/synapse/issues/7637))
- Convert user directory, state deltas, and stats handlers to async/await. ([\#7640](https://github.com/matrix-org/synapse/issues/7640))
- Remove some unused constants. ([\#7644](https://github.com/matrix-org/synapse/issues/7644))
- Fix type information on `assert_*_is_admin` methods. ([\#7645](https://github.com/matrix-org/synapse/issues/7645))
- Convert registration handler to async/await. ([\#7649](https://github.com/matrix-org/synapse/issues/7649))
Synapse 1.14.0 (2020-05-28)
===========================
No significant changes.
Synapse 1.14.0rc2 (2020-05-27)
==============================
Bugfixes
--------
- Fix cache config to not apply cache factor to event cache. Regression in v1.14.0rc1. ([\#7578](https://github.com/matrix-org/synapse/issues/7578))
- Fix bug where `ReplicationStreamer` was not always started when replication was enabled. Bug introduced in v1.14.0rc1. ([\#7579](https://github.com/matrix-org/synapse/issues/7579))
- Fix specifying individual cache factors for caches with special characters in their name. Regression in v1.14.0rc1. ([\#7580](https://github.com/matrix-org/synapse/issues/7580))
Improved Documentation
----------------------
- Fix the OIDC `client_auth_method` value in the sample config. ([\#7581](https://github.com/matrix-org/synapse/issues/7581))
Synapse 1.14.0rc1 (2020-05-26)
==============================
Features
--------
- Synapse's cache factor can now be configured in `homeserver.yaml` by the `caches.global_factor` setting. Additionally, `caches.per_cache_factors` controls the cache factors for individual caches. ([\#6391](https://github.com/matrix-org/synapse/issues/6391))
- Add OpenID Connect login/registration support. Contributed by Quentin Gliech, on behalf of [les Connecteurs](https://connecteu.rs). ([\#7256](https://github.com/matrix-org/synapse/issues/7256), [\#7457](https://github.com/matrix-org/synapse/issues/7457))
- Allow for using more than one spam checker module at once. ([\#7435](https://github.com/matrix-org/synapse/issues/7435))
- Add additional authentication checks for `m.room.power_levels` event per [MSC2209](https://github.com/matrix-org/matrix-doc/pull/2209). ([\#7502](https://github.com/matrix-org/synapse/issues/7502))
- Implement room version 6 per [MSC2240](https://github.com/matrix-org/matrix-doc/pull/2240). ([\#7506](https://github.com/matrix-org/synapse/issues/7506))
- Fix a bug where event updates might not be sent over replication to worker processes after the stream falls behind. ([\#7384](https://github.com/matrix-org/synapse/issues/7384))
- Allow expired user accounts to log out their device sessions. ([\#7443](https://github.com/matrix-org/synapse/issues/7443))
- Fix a bug that would cause Synapse not to resync out-of-sync device lists. ([\#7453](https://github.com/matrix-org/synapse/issues/7453))
- Prevent rooms with 0 members or with invalid version strings from breaking group queries. ([\#7465](https://github.com/matrix-org/synapse/issues/7465))
- Workaround for an upstream Twisted bug that caused Synapse to become unresponsive after startup. ([\#7473](https://github.com/matrix-org/synapse/issues/7473))
- Fix Redis reconnection logic that can result in missed updates over replication if master reconnects to Redis without restarting. ([\#7482](https://github.com/matrix-org/synapse/issues/7482))
- When sending `m.room.member` events, omit `displayname` and `avatar_url` if they aren't set instead of setting them to `null`. Contributed by Aaron Raimist. ([\#7497](https://github.com/matrix-org/synapse/issues/7497))
- Fix incorrect `method` label on `synapse_http_matrixfederationclient_{requests,responses}` prometheus metrics. ([\#7503](https://github.com/matrix-org/synapse/issues/7503))
- Ignore incoming presence events from other homeservers if presence is disabled locally. ([\#7508](https://github.com/matrix-org/synapse/issues/7508))
- Fix a long-standing bug that broke the update remote profile background process. ([\#7511](https://github.com/matrix-org/synapse/issues/7511))
- Hash passwords as early as possible during password reset. ([\#7538](https://github.com/matrix-org/synapse/issues/7538))
- Fix bug where a local user leaving a room could fail under rare circumstances. ([\#7548](https://github.com/matrix-org/synapse/issues/7548))
- Fix "Missing RelayState parameter" error when using user interactive authentication with SAML for some SAML providers. ([\#7552](https://github.com/matrix-org/synapse/issues/7552))
- Fix exception `'GenericWorkerReplicationHandler' object has no attribute 'send_federation_ack'`, introduced in v1.13.0. ([\#7564](https://github.com/matrix-org/synapse/issues/7564))
-`synctl` now warns if it was unable to stop Synapse and will not attempt to start Synapse if nothing was stopped. Contributed by Romain Bouyé. ([\#6598](https://github.com/matrix-org/synapse/issues/6598))
Updates to the Docker image
---------------------------
- Update docker runtime image to Alpine v3.11. Contributed by @Starbix. ([\#7398](https://github.com/matrix-org/synapse/issues/7398))
Improved Documentation
----------------------
- Update information about mapping providers for SAML and OpenID. ([\#7458](https://github.com/matrix-org/synapse/issues/7458))
- Add additional reverse proxy example for Caddy v2. Contributed by Jeff Peeler. ([\#7463](https://github.com/matrix-org/synapse/issues/7463))
- Fix copy-paste error in `ServerNoticesConfig` docstring. Contributed by @ptman. ([\#7477](https://github.com/matrix-org/synapse/issues/7477))
- Improve the formatting of `reverse_proxy.md`. ([\#7514](https://github.com/matrix-org/synapse/issues/7514))
- Change the systemd worker service to check that the worker config file exists instead of silently failing. Contributed by David Vo. ([\#7528](https://github.com/matrix-org/synapse/issues/7528))
- Minor clarifications to the TURN docs. ([\#7533](https://github.com/matrix-org/synapse/issues/7533))
Internal Changes
----------------
- Add typing annotations in `synapse.federation`. ([\#7382](https://github.com/matrix-org/synapse/issues/7382))
- Convert the room handler to async/await. ([\#7396](https://github.com/matrix-org/synapse/issues/7396))
- Improve performance of `get_e2e_cross_signing_key`. ([\#7428](https://github.com/matrix-org/synapse/issues/7428))
- Improve performance of `mark_as_sent_devices_by_remote`. ([\#7429](https://github.com/matrix-org/synapse/issues/7429), [\#7562](https://github.com/matrix-org/synapse/issues/7562))
- Add type hints to the SAML handler. ([\#7445](https://github.com/matrix-org/synapse/issues/7445))
- Remove storage method `get_hosts_in_room` that is no longer called anywhere. ([\#7448](https://github.com/matrix-org/synapse/issues/7448))
- Fix some typos in the `notice_expiry` templates. ([\#7449](https://github.com/matrix-org/synapse/issues/7449))
- Convert the federation handler to async/await. ([\#7459](https://github.com/matrix-org/synapse/issues/7459))
- Convert the search handler to async/await. ([\#7460](https://github.com/matrix-org/synapse/issues/7460))
- Add type hints to `synapse.event_auth`. ([\#7505](https://github.com/matrix-org/synapse/issues/7505))
- Convert the room member handler to async/await. ([\#7507](https://github.com/matrix-org/synapse/issues/7507))
- Add type hints to room member handler. ([\#7513](https://github.com/matrix-org/synapse/issues/7513))
- Fix typing annotations in `tests.replication`. ([\#7518](https://github.com/matrix-org/synapse/issues/7518))
- Remove some redundant Python 2 support code. ([\#7519](https://github.com/matrix-org/synapse/issues/7519))
- All endpoints now respond with a 200 OK for `OPTIONS` requests. ([\#7534](https://github.com/matrix-org/synapse/issues/7534), [\#7560](https://github.com/matrix-org/synapse/issues/7560))
- Synapse now exports [detailed allocator statistics](https://doc.pypy.org/en/latest/gc_info.html#gc-get-stats) and basic GC timings as Prometheus metrics (`pypy_gc_time_seconds_total` and `pypy_memory_bytes`) when run under PyPy. Contributed by Ivan Shapovalov. ([\#7536](https://github.com/matrix-org/synapse/issues/7536))
- Remove Ubuntu Cosmic and Disco from the list of distributions which we provide `.deb`s for, due to end-of-life. ([\#7539](https://github.com/matrix-org/synapse/issues/7539))
- Make worker processes return a stubbed-out response to `GET /presence` requests. ([\#7545](https://github.com/matrix-org/synapse/issues/7545))
- Optimise some references to `hs.config`. ([\#7546](https://github.com/matrix-org/synapse/issues/7546))
- On upgrade room only send canonical alias once. ([\#7547](https://github.com/matrix-org/synapse/issues/7547))
- Fix some indentation inconsistencies in the sample config. ([\#7550](https://github.com/matrix-org/synapse/issues/7550))
- Include `synapse.http.site` in type checking. ([\#7553](https://github.com/matrix-org/synapse/issues/7553))
- Fix some test code to not mangle stacktraces, to make it easier to debug errors. ([\#7554](https://github.com/matrix-org/synapse/issues/7554))
- Refresh apt cache when building `dh_virtualenv` docker image. ([\#7555](https://github.com/matrix-org/synapse/issues/7555))
- Stop logging some expected HTTP request errors as exceptions. ([\#7556](https://github.com/matrix-org/synapse/issues/7556), [\#7563](https://github.com/matrix-org/synapse/issues/7563))
- Convert sending mail to async/await. ([\#7557](https://github.com/matrix-org/synapse/issues/7557))
With the release of Synapse 1.13.0, the default `git` branch for Synapse has
changed to `develop`, which is the development tip. This is more consistent with
common practice and modern `git` usage.
The `master` branch, which tracks the latest release, is still available. It is
recommended that developers and distributors who have scripts which run builds
using the default branch of Synapse should therefore consider pinning their
scripts to `master`.
Internal Changes
----------------
- Update the version of dh-virtualenv we use to build debs, and add focal to the list of target distributions. ([\#7526](https://github.com/matrix-org/synapse/issues/7526))
Synapse 1.13.0rc3 (2020-05-18)
==============================
Bugfixes
--------
- Hash passwords as early as possible during registration. ([\#7523](https://github.com/matrix-org/synapse/issues/7523))
Synapse 1.13.0rc2 (2020-05-14)
==============================
Bugfixes
--------
- Fix a long-standing bug which could cause messages not to be sent over federation, when state events with state keys matching user IDs (such as custom user statuses) were received. ([\#7376](https://github.com/matrix-org/synapse/issues/7376))
- Restore compatibility with non-compliant clients during the user interactive authentication process, fixing a problem introduced in v1.13.0rc1. ([\#7483](https://github.com/matrix-org/synapse/issues/7483))
Internal Changes
----------------
- Fix linting errors in new version of Flake8. ([\#7470](https://github.com/matrix-org/synapse/issues/7470))
- Eventually-consistent cryptographically secure synchronisation of room
state across a global open network of federated servers and services
- Sending and receiving extensible messages in a room with (optional)
end-to-end encryption[1]
end-to-end encryption
- Inviting, joining, leaving, kicking, banning room members
- Managing user accounts (registration, login, logout)
- Using 3rd Party IDs (3PIDs) such as email addresses, phone numbers,
@@ -74,7 +82,15 @@ at the `Matrix spec <https://matrix.org/docs/spec>`_, and experiment with the
Thanks for using Matrix!
[1] End-to-end encryption is currently in beta: `blog post <https://matrix.org/blog/2016/11/21/matrixs-olm-end-to-end-encryption-security-assessment-released-and-implemented-cross-platform-on-riot-at-last>`_.
Support
=======
For support installing or managing Synapse, please join |room|_ (from a matrix.org
account if necessary) and ask questions there. We do not use GitHub issues for
support requests, only for bug reports and feature requests.
..|room|replace::``#synapse:matrix.org``
.._room: https://matrix.to/#/#synapse:matrix.org
Synapse Installation
@@ -96,12 +112,11 @@ Unless you are running a test instance of Synapse on your local machine, in
general, you will need to enable TLS support before you can successfully
connect from a client: see `<INSTALL.md#tls-certificates>`_.
An easy way to get started is to login or register via Riot at
https://riot.im/app/#/login or https://riot.im/app/#/register respectively.
An easy way to get started is to login or register via Element at
https://app.element.io/#/login or https://app.element.io/#/register respectively.
You will need to change the server you are logging into from ``matrix.org``
and instead specify a Homeserver URL of ``https://<server_name>:8448``
(or just ``https://<server_name>`` if you are using a reverse proxy).
(Leave the identity server as the default - see `Identity servers`_.)
From 10th August 2020, we will no longer publish Docker images with the `-py3` tag suffix. The images tagged with the `-py3` suffix have been identical to the non-suffixed tags since release 0.99.0, and the suffix is obsolete.
On 10th August, we will remove the `latest-py3` tag. Existing per-release tags (such as `v1.18.0-py3`) will not be removed, but no new `-py3` tags will be added.
Scripts relying on the `-py3` suffix will need to be updated.
Redis replication is now recommended in lieu of TCP replication
When setting up worker processes, we now recommend the use of a Redis server for replication. **The old direct TCP connection method is deprecated and will be removed in a future release.**
See `docs/workers.md <docs/workers.md>`_ for more details.
Upgrading to v1.14.0
====================
This version includes a database update which is run as part of the upgrade,
and which may take a couple of minutes in the case of a large server. Synapse
will not respond to HTTP requests while this update is taking place.
Upgrading to v1.13.0
====================
Incorrect database migration in old synapse versions
Any OpenID Connect Provider (OP) should work with Synapse, as long as it supports the authorization code flow.
There are a few options for that:
- start a local OP. Synapse has been tested with [Hydra][hydra] and [Dex][dex-idp].
Note that for an OP to work, it should be served under a secure (HTTPS) origin.
A certificate signed with a self-signed, locally trusted CA should work. In that case, start Synapse with a `SSL_CERT_FILE` environment variable set to the path of the CA.
- use a publicly available OP. Synapse has been tested with [Google][google-idp].
- setup a SaaS OP, like [Auth0][auth0] and [Okta][okta]. Auth0 has a free tier which has been tested with Synapse.
Here are a few configs for providers that should work with Synapse.
### [Dex][dex-idp]
[Dex][dex-idp] is a simple, open-source, certified OpenID Connect Provider.
Although it is designed to help building a full-blown provider, with some external database, it can be configured with static passwords in a config file.
Follow the [Getting Started guide](https://github.com/dexidp/dex/blob/master/Documentation/getting-started.md) to install Dex.
Edit `examples/config-dev.yaml` config file from the Dex repo to add a client:
```yaml
staticClients:
- id:synapse
secret:secret
redirectURIs:
- '[synapse base url]/_synapse/oidc/callback'
name:'Synapse'
```
Run with `dex serve examples/config-dex.yaml`
Synapse config:
```yaml
oidc_config:
enabled:true
skip_verification:true# This is needed as Dex is served on an insecure endpoint
GitHub is a bit special as it is not an OpenID Connect compliant provider, but just a regular OAuth2 provider.
The `/user` API endpoint can be used to retrieve informations from the user.
As the OIDC login mechanism needs an attribute to uniquely identify users and that endpoint does not return a `sub` property, an alternative `subject_claim` has to be set.
1. Create a new OAuth application: https://github.com/settings/applications/new
2. Set the callback URL to `[synapse base url]/_synapse/oidc/callback`
```yaml
oidc_config:
enabled: true
issuer: "https://github.com/"
discover: false
client_id: "your-client-id" # TO BE FILLED
client_secret: "your-client-secret" # TO BE FILLED
> **NOTE**: ensure the `nocanon` options are included.
**NOTE**: ensure the `nocanon` options are included.
**NOTE 2**: It appears that Synapse is currently incompatible with the ModSecurity module for Apache (`mod_security2`). If you need it enabled for other services on your web server, you can disable it for Synapse's two VirtualHosts by including the following lines before each of the two `</VirtualHost>` above:
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
