Pin link in CHANGES.md

- Remove the requirement for a specific version of Python
- Move dep comment to a separate line, Tox 3.7.0 like trailing ones

Signed-off-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>

.buildkite/docker-compose.py35.pg95.yaml

@@ -1,22 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:9.5
-    environment:
-      POSTGRES_PASSWORD: postgres
-    command: -c fsync=off
-
-  testenv:
-    image: python:3.5
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /src
-    volumes:
-      - ..:/src

.buildkite/docker-compose.py37.pg11.yaml

@@ -1,22 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:11
-    environment:
-      POSTGRES_PASSWORD: postgres
-    command: -c fsync=off
-
-  testenv:
-    image: python:3.7
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /src
-    volumes:
-      - ..:/src

.buildkite/docker-compose.py37.pg95.yaml

@@ -1,22 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:9.5
-    environment:
-      POSTGRES_PASSWORD: postgres
-    command: -c fsync=off
-
-  testenv:
-    image: python:3.7
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /src
-    volumes:
-      - ..:/src

.buildkite/scripts/test_old_deps.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+# this script is run by buildkite in a plain `xenial` container; it installs the
+# minimal requirements for tox and hands over to the py35-old tox environment.
+
+set -ex
+
+apt-get update
+apt-get install -y python3.5 python3.5-dev python3-pip libxml2-dev libxslt-dev zlib1g-dev tox
+
+export LANG="C.UTF-8"
+
+exec tox -e py35-old,combine

.buildkite/worker-blacklist

@@ -5,8 +5,6 @@ Message history can be paginated
 
 Can re-join room if re-invited
 
-/upgrade creates a new room
-
 The only membership state included in an initial sync is for all the senders in the timeline
 
 Local device key changes get to remote servers
@@ -39,3 +37,5 @@ Server correctly handles incoming m.device_list_update
 
 # this fails reliably with a torture level of 100 due to https://github.com/matrix-org/synapse/issues/6536
 Outbound federation requests missing prev_events and then asks for /state_ids and resolves the state
+
+Can get rooms/{roomId}/members at a given point

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,5 @@
+**If you are looking for support** please ask in **#synapse:matrix.org**
+(using a matrix.org account if necessary). We do not use GitHub issues for
+support.
+
+**If you want to report a security issue** please see https://matrix.org/security-disclosure-policy/

.github/ISSUE_TEMPLATE/BUG_REPORT.md

@@ -4,11 +4,13 @@ about: Create a report to help us improve
 
 ---
 
+**THIS IS NOT A SUPPORT CHANNEL!**
+**IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**,
+please ask in **#synapse:matrix.org** (using a matrix.org account if necessary)
+
 <!--
 
-**IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**:
-You will likely get better support more quickly if you ask in ** #synapse:matrix.org ** ;)
-
+If you want to report a security issue, please see https://matrix.org/security-disclosure-policy/
 
 This is a bug report template. By following the instructions below and
 filling out the sections with your information, you will help the us to get all

.github/PULL_REQUEST_TEMPLATE.md

@@ -3,6 +3,10 @@
 <!-- Please read CONTRIBUTING.md before submitting your pull request -->
 
 * [ ] Pull request is based on the develop branch
-* [ ] Pull request includes a [changelog file](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.md#changelog)
+* [ ] Pull request includes a [changelog file](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.md#changelog). The entry should:
+  - Be a short description of your change which makes sense to users. "Fixed a bug that prevented receiving messages from other servers." instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
+  - Use markdown where necessary, mostly for `code blocks`.
+  - End with either a period (.) or an exclamation mark (!).
+  - Start with a capital letter.
 * [ ] Pull request includes a [sign off](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.md#sign-off)
 * [ ] Code style is correct (run the [linters](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.md#code-style))

CHANGES.md

@@ -1,6 +1,968 @@
+Synapse 1.16.0rc1 (2020-07-01)
+==============================
+
+Note that this release deprecates the `m.login.jwt` login method, renaming it
+to `org.matrix.login.jwt`, as `m.login.jwt` is not part of the Matrix spec.
+Otherwise the behaviour is identical. Synapse will accept both names for now,
+but this may change in a future release.
+
+Features
+--------
+
+- Add an option to enable encryption by default for new rooms. ([\#7639](https://github.com/matrix-org/synapse/issues/7639))
+- Add support for running multiple media repository workers. See [docs/workers.md](https://github.com/matrix-org/synapse/blob/release-v1.16.0/docs/workers.md) for instructions. ([\#7706](https://github.com/matrix-org/synapse/issues/7706))
+- Media can now be marked as safe from quarantined. ([\#7718](https://github.com/matrix-org/synapse/issues/7718))
+- Expand the configuration options for auto-join rooms. ([\#7763](https://github.com/matrix-org/synapse/issues/7763))
+
+
+Bugfixes
+--------
+
+- Remove `user_id` from the response to `GET /_matrix/client/r0/presence/{userId}/status` to match the specification. ([\#7606](https://github.com/matrix-org/synapse/issues/7606))
+- In worker mode, ensure that replicated data has not already been received. ([\#7648](https://github.com/matrix-org/synapse/issues/7648))
+- Fix intermittent exception during startup, introduced in Synapse 1.14.0. ([\#7663](https://github.com/matrix-org/synapse/issues/7663))
+- Include a user-agent for federation and well-known requests. ([\#7677](https://github.com/matrix-org/synapse/issues/7677))
+- Accept the proper field (`phone`) for the `m.id.phone` identifier type. The legacy field of `number` is still accepted as a fallback. Bug introduced in v0.20.0. ([\#7687](https://github.com/matrix-org/synapse/issues/7687))
+- Fix "Starting db txn 'get_completed_ui_auth_stages' from sentinel context" warning. The bug was introduced in 1.13.0. ([\#7688](https://github.com/matrix-org/synapse/issues/7688))
+- Compare the URI and method during user interactive authentication (instead of the URI twice). Bug introduced in 1.13.0. ([\#7689](https://github.com/matrix-org/synapse/issues/7689))
+- Fix a long standing bug where the response to the `GET room_keys/version` endpoint had the incorrect type for the `etag` field. ([\#7691](https://github.com/matrix-org/synapse/issues/7691))
+- Fix logged error during device resync in opentracing. Broke in v1.14.0. ([\#7698](https://github.com/matrix-org/synapse/issues/7698))
+- Do not break push rule evaluation when receiving an event with a non-string body. This is a long-standing bug. ([\#7701](https://github.com/matrix-org/synapse/issues/7701))
+- Fixs a long standing bug which resulted in an exception: "TypeError: argument of type 'ObservableDeferred' is not iterable". ([\#7708](https://github.com/matrix-org/synapse/issues/7708))
+- The `synapse_port_db` script no longer fails when the `ui_auth_sessions` table is non-empty. This bug has existed since v1.13.0. ([\#7711](https://github.com/matrix-org/synapse/issues/7711))
+- Synapse will now fetch media from the proper specified URL (using the r0 prefix instead of the unspecified v1). ([\#7714](https://github.com/matrix-org/synapse/issues/7714))
+- Fix the tables ignored by `synapse_port_db` to be in sync the current database schema. ([\#7717](https://github.com/matrix-org/synapse/issues/7717))
+- Fix missing `Content-Length` on HTTP responses from the metrics handler. ([\#7730](https://github.com/matrix-org/synapse/issues/7730))
+- Fix large state resolutions from stalling Synapse for seconds at a time. ([\#7735](https://github.com/matrix-org/synapse/issues/7735), [\#7746](https://github.com/matrix-org/synapse/issues/7746))
+
+
+Improved Documentation
+----------------------
+
+- Spelling correction in sample_config.yaml. ([\#7652](https://github.com/matrix-org/synapse/issues/7652))
+- Added instructions for how to use Keycloak via OpenID Connect to authenticate with Synapse. ([\#7659](https://github.com/matrix-org/synapse/issues/7659))
+- Corrected misspelling of PostgreSQL. ([\#7724](https://github.com/matrix-org/synapse/issues/7724))
+
+
+Deprecations and Removals
+-------------------------
+
+- Deprecate `m.login.jwt` login method in favour of `org.matrix.login.jwt`, as `m.login.jwt` is not part of the Matrix spec. ([\#7675](https://github.com/matrix-org/synapse/issues/7675))
+
+
+Internal Changes
+----------------
+
+- Refactor getting replication updates from database. ([\#7636](https://github.com/matrix-org/synapse/issues/7636))
+- Clean-up the login fallback code. ([\#7657](https://github.com/matrix-org/synapse/issues/7657))
+- Increase the default SAML session expiry time to 15 minutes. ([\#7664](https://github.com/matrix-org/synapse/issues/7664))
+- Convert the device message and pagination handlers to async/await. ([\#7678](https://github.com/matrix-org/synapse/issues/7678))
+- Convert typing handler to async/await. ([\#7679](https://github.com/matrix-org/synapse/issues/7679))
+- Require `parameterized` package version to be at least 0.7.0. ([\#7680](https://github.com/matrix-org/synapse/issues/7680))
+- Refactor handling of `listeners` configuration settings. ([\#7681](https://github.com/matrix-org/synapse/issues/7681))
+- Replace uses of `six.iterkeys`/`iteritems`/`itervalues` with `keys()`/`items()`/`values()`. ([\#7692](https://github.com/matrix-org/synapse/issues/7692))
+- Add support for using `rust-python-jaeger-reporter` library to reduce jaeger tracing overhead. ([\#7697](https://github.com/matrix-org/synapse/issues/7697))
+- Make Tox actions work on Debian 10. ([\#7703](https://github.com/matrix-org/synapse/issues/7703))
+- Replace all remaining uses of `six` with native Python 3 equivalents. Contributed by @ilmari. ([\#7704](https://github.com/matrix-org/synapse/issues/7704))
+- Fix broken link in sample config. ([\#7712](https://github.com/matrix-org/synapse/issues/7712))
+- Speed up state res v2 across large state differences. ([\#7725](https://github.com/matrix-org/synapse/issues/7725))
+- Convert directory handler to async/await. ([\#7727](https://github.com/matrix-org/synapse/issues/7727))
+- Move `flake8` to the end of `scripts-dev/lint.sh` as it takes the longest and could cause the script to exit early. ([\#7738](https://github.com/matrix-org/synapse/issues/7738))
+- Explain the "test" conditional requirement for dependencies is not all of the modules necessary to run the unit tests. ([\#7751](https://github.com/matrix-org/synapse/issues/7751))
+- Add some metrics for inbound and outbound federation latencies: `synapse_federation_server_pdu_process_time` and `synapse_event_processing_lag_by_event`. ([\#7755](https://github.com/matrix-org/synapse/issues/7755))
+
+
+Synapse 1.15.1 (2020-06-16)
+===========================
+
+Bugfixes
+--------
+
+- Fix a bug introduced in v1.15.0 that would crash Synapse on start when using certain password auth providers. ([\#7684](https://github.com/matrix-org/synapse/issues/7684))
+- Fix a bug introduced in v1.15.0 which meant that some 3PID management endpoints were not accessible on the correct URL. ([\#7685](https://github.com/matrix-org/synapse/issues/7685))
+
+
+Synapse 1.15.0 (2020-06-11)
+===========================
+
+No significant changes.
+
+
+Synapse 1.15.0rc1 (2020-06-09)
+==============================
+
+Features
+--------
+
+- Advertise support for Client-Server API r0.6.0 and remove related unstable feature flags. ([\#6585](https://github.com/matrix-org/synapse/issues/6585))
+- Add an option to disable autojoining rooms for guest accounts. ([\#6637](https://github.com/matrix-org/synapse/issues/6637))
+- For SAML authentication, add the ability to pass email addresses to be added to new users' accounts via SAML attributes. Contributed by Christopher Cooper. ([\#7385](https://github.com/matrix-org/synapse/issues/7385))
+- Add admin APIs to allow server admins to manage users' devices. Contributed by @dklimpel. ([\#7481](https://github.com/matrix-org/synapse/issues/7481))
+- Add support for generating thumbnails for WebP images. Previously, users would see an empty box instead of preview image. Contributed by @WGH-. ([\#7586](https://github.com/matrix-org/synapse/issues/7586))
+- Support the standardized `m.login.sso` user-interactive authentication flow. ([\#7630](https://github.com/matrix-org/synapse/issues/7630))
+
+
+Bugfixes
+--------
+
+- Allow new users to be registered via the admin API even if the monthly active user limit has been reached. Contributed by @dklimpel. ([\#7263](https://github.com/matrix-org/synapse/issues/7263))
+- Fix email notifications not being enabled for new users when created via the Admin API. ([\#7267](https://github.com/matrix-org/synapse/issues/7267))
+- Fix str placeholders in an instance of `PrepareDatabaseException`. Introduced in Synapse v1.8.0. ([\#7575](https://github.com/matrix-org/synapse/issues/7575))
+- Fix a bug in automatic user creation during first time login with `m.login.jwt`. Regression in v1.6.0. Contributed by @olof. ([\#7585](https://github.com/matrix-org/synapse/issues/7585))
+- Fix a bug causing the cross-signing keys to be ignored when resyncing a device list. ([\#7594](https://github.com/matrix-org/synapse/issues/7594))
+- Fix metrics failing when there is a large number of active background processes. ([\#7597](https://github.com/matrix-org/synapse/issues/7597))
+- Fix bug where returning rooms for a group would fail if it included a room that the server was not in. ([\#7599](https://github.com/matrix-org/synapse/issues/7599))
+- Fix duplicate key violation when persisting read markers. ([\#7607](https://github.com/matrix-org/synapse/issues/7607))
+- Prevent an entire iteration of the device list resync loop from failing if one server responds with a malformed result. ([\#7609](https://github.com/matrix-org/synapse/issues/7609))
+- Fix exceptions when fetching events from a remote host fails. ([\#7622](https://github.com/matrix-org/synapse/issues/7622))
+- Make `synctl restart` start synapse if it wasn't running. ([\#7624](https://github.com/matrix-org/synapse/issues/7624))
+- Pass device information through to the login endpoint when using the login fallback. ([\#7629](https://github.com/matrix-org/synapse/issues/7629))
+- Advertise the `m.login.token` login flow when OpenID Connect is enabled. ([\#7631](https://github.com/matrix-org/synapse/issues/7631))
+- Fix bug in account data replication stream. ([\#7656](https://github.com/matrix-org/synapse/issues/7656))
+
+
+Improved Documentation
+----------------------
+
+- Update the OpenBSD installation instructions. ([\#7587](https://github.com/matrix-org/synapse/issues/7587))
+- Advertise Python 3.8 support in `setup.py`. ([\#7602](https://github.com/matrix-org/synapse/issues/7602))
+- Add a link to `#synapse:matrix.org` in the troubleshooting section of the README. ([\#7603](https://github.com/matrix-org/synapse/issues/7603))
+- Clarifications to the admin api documentation. ([\#7647](https://github.com/matrix-org/synapse/issues/7647))
+
+
+Internal Changes
+----------------
+
+- Convert the identity handler to async/await. ([\#7561](https://github.com/matrix-org/synapse/issues/7561))
+- Improve query performance for fetching state from a PostgreSQL database. Contributed by @ilmari. ([\#7567](https://github.com/matrix-org/synapse/issues/7567))
+- Speed up processing of federation stream RDATA rows. ([\#7584](https://github.com/matrix-org/synapse/issues/7584))
+- Add comment to systemd example to show postgresql dependency. ([\#7591](https://github.com/matrix-org/synapse/issues/7591))
+- Refactor `Ratelimiter` to limit the amount of expensive config value accesses. ([\#7595](https://github.com/matrix-org/synapse/issues/7595))
+- Convert groups handlers to async/await. ([\#7600](https://github.com/matrix-org/synapse/issues/7600))
+- Clean up exception handling in `SAML2ResponseResource`. ([\#7614](https://github.com/matrix-org/synapse/issues/7614))
+- Check that all asynchronous tasks succeed and general cleanup of `MonthlyActiveUsersTestCase` and `TestMauLimit`. ([\#7619](https://github.com/matrix-org/synapse/issues/7619))
+- Convert `get_user_id_by_threepid` to async/await. ([\#7620](https://github.com/matrix-org/synapse/issues/7620))
+- Switch to upstream `dh-virtualenv` rather than our fork for Debian package builds. ([\#7621](https://github.com/matrix-org/synapse/issues/7621))
+- Update CI scripts to check the number in the newsfile fragment. ([\#7623](https://github.com/matrix-org/synapse/issues/7623))
+- Check if the localpart of a Matrix ID is reserved for guest users earlier in the registration flow, as well as when responding to requests to `/register/available`. ([\#7625](https://github.com/matrix-org/synapse/issues/7625))
+- Minor cleanups to OpenID Connect integration. ([\#7628](https://github.com/matrix-org/synapse/issues/7628))
+- Attempt to fix flaky test: `PhoneHomeStatsTestCase.test_performance_100`. ([\#7634](https://github.com/matrix-org/synapse/issues/7634))
+- Fix typos of `m.olm.curve25519-aes-sha2` and `m.megolm.v1.aes-sha2` in comments, test files. ([\#7637](https://github.com/matrix-org/synapse/issues/7637))
+- Convert user directory, state deltas, and stats handlers to async/await. ([\#7640](https://github.com/matrix-org/synapse/issues/7640))
+- Remove some unused constants. ([\#7644](https://github.com/matrix-org/synapse/issues/7644))
+- Fix type information on `assert_*_is_admin` methods. ([\#7645](https://github.com/matrix-org/synapse/issues/7645))
+- Convert registration handler to async/await. ([\#7649](https://github.com/matrix-org/synapse/issues/7649))
+
+
+Synapse 1.14.0 (2020-05-28)
+===========================
+
+No significant changes.
+
+
+Synapse 1.14.0rc2 (2020-05-27)
+==============================
+
+Bugfixes
+--------
+
+- Fix cache config to not apply cache factor to event cache. Regression in v1.14.0rc1. ([\#7578](https://github.com/matrix-org/synapse/issues/7578))
+- Fix bug where `ReplicationStreamer` was not always started when replication was enabled. Bug introduced in v1.14.0rc1. ([\#7579](https://github.com/matrix-org/synapse/issues/7579))
+- Fix specifying individual cache factors for caches with special characters in their name. Regression in v1.14.0rc1. ([\#7580](https://github.com/matrix-org/synapse/issues/7580))
+
+
+Improved Documentation
+----------------------
+
+- Fix the OIDC `client_auth_method` value in the sample config. ([\#7581](https://github.com/matrix-org/synapse/issues/7581))
+
+
+Synapse 1.14.0rc1 (2020-05-26)
+==============================
+
+Features
+--------
+
+- Synapse's cache factor can now be configured in `homeserver.yaml` by the `caches.global_factor` setting. Additionally, `caches.per_cache_factors` controls the cache factors for individual caches. ([\#6391](https://github.com/matrix-org/synapse/issues/6391))
+- Add OpenID Connect login/registration support. Contributed by Quentin Gliech, on behalf of [les Connecteurs](https://connecteu.rs). ([\#7256](https://github.com/matrix-org/synapse/issues/7256), [\#7457](https://github.com/matrix-org/synapse/issues/7457))
+- Add room details admin endpoint. Contributed by Awesome Technologies Innovationslabor GmbH. ([\#7317](https://github.com/matrix-org/synapse/issues/7317))
+- Allow for using more than one spam checker module at once. ([\#7435](https://github.com/matrix-org/synapse/issues/7435))
+- Add additional authentication checks for `m.room.power_levels` event per [MSC2209](https://github.com/matrix-org/matrix-doc/pull/2209). ([\#7502](https://github.com/matrix-org/synapse/issues/7502))
+- Implement room version 6 per [MSC2240](https://github.com/matrix-org/matrix-doc/pull/2240). ([\#7506](https://github.com/matrix-org/synapse/issues/7506))
+- Add highly experimental option to move event persistence off master. ([\#7281](https://github.com/matrix-org/synapse/issues/7281), [\#7374](https://github.com/matrix-org/synapse/issues/7374), [\#7436](https://github.com/matrix-org/synapse/issues/7436), [\#7440](https://github.com/matrix-org/synapse/issues/7440), [\#7475](https://github.com/matrix-org/synapse/issues/7475), [\#7490](https://github.com/matrix-org/synapse/issues/7490), [\#7491](https://github.com/matrix-org/synapse/issues/7491), [\#7492](https://github.com/matrix-org/synapse/issues/7492), [\#7493](https://github.com/matrix-org/synapse/issues/7493), [\#7495](https://github.com/matrix-org/synapse/issues/7495), [\#7515](https://github.com/matrix-org/synapse/issues/7515), [\#7516](https://github.com/matrix-org/synapse/issues/7516), [\#7517](https://github.com/matrix-org/synapse/issues/7517), [\#7542](https://github.com/matrix-org/synapse/issues/7542))
+
+
+Bugfixes
+--------
+
+- Fix a bug where event updates might not be sent over replication to worker processes after the stream falls behind. ([\#7384](https://github.com/matrix-org/synapse/issues/7384))
+- Allow expired user accounts to log out their device sessions. ([\#7443](https://github.com/matrix-org/synapse/issues/7443))
+- Fix a bug that would cause Synapse not to resync out-of-sync device lists. ([\#7453](https://github.com/matrix-org/synapse/issues/7453))
+- Prevent rooms with 0 members or with invalid version strings from breaking group queries. ([\#7465](https://github.com/matrix-org/synapse/issues/7465))
+- Workaround for an upstream Twisted bug that caused Synapse to become unresponsive after startup. ([\#7473](https://github.com/matrix-org/synapse/issues/7473))
+- Fix Redis reconnection logic that can result in missed updates over replication if master reconnects to Redis without restarting. ([\#7482](https://github.com/matrix-org/synapse/issues/7482))
+- When sending `m.room.member` events, omit `displayname` and `avatar_url` if they aren't set instead of setting them to `null`. Contributed by Aaron Raimist. ([\#7497](https://github.com/matrix-org/synapse/issues/7497))
+- Fix incorrect `method` label on `synapse_http_matrixfederationclient_{requests,responses}` prometheus metrics. ([\#7503](https://github.com/matrix-org/synapse/issues/7503))
+- Ignore incoming presence events from other homeservers if presence is disabled locally. ([\#7508](https://github.com/matrix-org/synapse/issues/7508))
+- Fix a long-standing bug that broke the update remote profile background process. ([\#7511](https://github.com/matrix-org/synapse/issues/7511))
+- Hash passwords as early as possible during password reset. ([\#7538](https://github.com/matrix-org/synapse/issues/7538))
+- Fix bug where a local user leaving a room could fail under rare circumstances. ([\#7548](https://github.com/matrix-org/synapse/issues/7548))
+- Fix "Missing RelayState parameter" error when using user interactive authentication with SAML for some SAML providers. ([\#7552](https://github.com/matrix-org/synapse/issues/7552))
+- Fix exception `'GenericWorkerReplicationHandler' object has no attribute 'send_federation_ack'`, introduced in v1.13.0. ([\#7564](https://github.com/matrix-org/synapse/issues/7564))
+- `synctl` now warns if it was unable to stop Synapse and will not attempt to start Synapse if nothing was stopped. Contributed by Romain Bouyé. ([\#6598](https://github.com/matrix-org/synapse/issues/6598))
+
+
+Updates to the Docker image
+---------------------------
+
+- Update docker runtime image to Alpine v3.11. Contributed by @Starbix. ([\#7398](https://github.com/matrix-org/synapse/issues/7398))
+
+
+Improved Documentation
+----------------------
+
+- Update information about mapping providers for SAML and OpenID. ([\#7458](https://github.com/matrix-org/synapse/issues/7458))
+- Add additional reverse proxy example for Caddy v2. Contributed by Jeff Peeler. ([\#7463](https://github.com/matrix-org/synapse/issues/7463))
+- Fix copy-paste error in `ServerNoticesConfig` docstring. Contributed by @ptman. ([\#7477](https://github.com/matrix-org/synapse/issues/7477))
+- Improve the formatting of `reverse_proxy.md`. ([\#7514](https://github.com/matrix-org/synapse/issues/7514))
+- Change the systemd worker service to check that the worker config file exists instead of silently failing. Contributed by David Vo. ([\#7528](https://github.com/matrix-org/synapse/issues/7528))
+- Minor clarifications to the TURN docs. ([\#7533](https://github.com/matrix-org/synapse/issues/7533))
+
+
+Internal Changes
+----------------
+
+- Add typing annotations in `synapse.federation`. ([\#7382](https://github.com/matrix-org/synapse/issues/7382))
+- Convert the room handler to async/await. ([\#7396](https://github.com/matrix-org/synapse/issues/7396))
+- Improve performance of `get_e2e_cross_signing_key`. ([\#7428](https://github.com/matrix-org/synapse/issues/7428))
+- Improve performance of `mark_as_sent_devices_by_remote`. ([\#7429](https://github.com/matrix-org/synapse/issues/7429), [\#7562](https://github.com/matrix-org/synapse/issues/7562))
+- Add type hints to the SAML handler. ([\#7445](https://github.com/matrix-org/synapse/issues/7445))
+- Remove storage method `get_hosts_in_room` that is no longer called anywhere. ([\#7448](https://github.com/matrix-org/synapse/issues/7448))
+- Fix some typos in the `notice_expiry` templates. ([\#7449](https://github.com/matrix-org/synapse/issues/7449))
+- Convert the federation handler to async/await. ([\#7459](https://github.com/matrix-org/synapse/issues/7459))
+- Convert the search handler to async/await. ([\#7460](https://github.com/matrix-org/synapse/issues/7460))
+- Add type hints to `synapse.event_auth`. ([\#7505](https://github.com/matrix-org/synapse/issues/7505))
+- Convert the room member handler to async/await. ([\#7507](https://github.com/matrix-org/synapse/issues/7507))
+- Add type hints to room member handler. ([\#7513](https://github.com/matrix-org/synapse/issues/7513))
+- Fix typing annotations in `tests.replication`. ([\#7518](https://github.com/matrix-org/synapse/issues/7518))
+- Remove some redundant Python 2 support code. ([\#7519](https://github.com/matrix-org/synapse/issues/7519))
+- All endpoints now respond with a 200 OK for `OPTIONS` requests. ([\#7534](https://github.com/matrix-org/synapse/issues/7534), [\#7560](https://github.com/matrix-org/synapse/issues/7560))
+- Synapse now exports [detailed allocator statistics](https://doc.pypy.org/en/latest/gc_info.html#gc-get-stats) and basic GC timings as Prometheus metrics (`pypy_gc_time_seconds_total` and `pypy_memory_bytes`) when run under PyPy. Contributed by Ivan Shapovalov. ([\#7536](https://github.com/matrix-org/synapse/issues/7536))
+- Remove Ubuntu Cosmic and Disco from the list of distributions which we provide `.deb`s for, due to end-of-life. ([\#7539](https://github.com/matrix-org/synapse/issues/7539))
+- Make worker processes return a stubbed-out response to `GET /presence` requests. ([\#7545](https://github.com/matrix-org/synapse/issues/7545))
+- Optimise some references to `hs.config`. ([\#7546](https://github.com/matrix-org/synapse/issues/7546))
+- On upgrade room only send canonical alias once. ([\#7547](https://github.com/matrix-org/synapse/issues/7547))
+- Fix some indentation inconsistencies in the sample config. ([\#7550](https://github.com/matrix-org/synapse/issues/7550))
+- Include `synapse.http.site` in type checking. ([\#7553](https://github.com/matrix-org/synapse/issues/7553))
+- Fix some test code to not mangle stacktraces, to make it easier to debug errors. ([\#7554](https://github.com/matrix-org/synapse/issues/7554))
+- Refresh apt cache when building `dh_virtualenv` docker image. ([\#7555](https://github.com/matrix-org/synapse/issues/7555))
+- Stop logging some expected HTTP request errors as exceptions. ([\#7556](https://github.com/matrix-org/synapse/issues/7556), [\#7563](https://github.com/matrix-org/synapse/issues/7563))
+- Convert sending mail to async/await. ([\#7557](https://github.com/matrix-org/synapse/issues/7557))
+- Simplify `reap_monthly_active_users`. ([\#7558](https://github.com/matrix-org/synapse/issues/7558))
+
+
+Synapse 1.13.0 (2020-05-19)
+===========================
+
+This release brings some potential changes necessary for certain
+configurations of Synapse:
+
+* If your Synapse is configured to use SSO and have a custom
+  `sso_redirect_confirm_template_dir` configuration option set, you will need
+  to duplicate the new `sso_auth_confirm.html`, `sso_auth_success.html` and
+  `sso_account_deactivated.html` templates into that directory.
+* Synapse plugins using the `complete_sso_login` method of
+  `synapse.module_api.ModuleApi` should instead switch to the async/await
+  version, `complete_sso_login_async`, which includes additional checks. The
+  former version is now deprecated.
+* A bug was introduced in Synapse 1.4.0 which could cause the room directory
+  to be incomplete or empty if Synapse was upgraded directly from v1.2.1 or
+  earlier, to versions between v1.4.0 and v1.12.x.
+
+Please review [UPGRADE.rst](UPGRADE.rst) for more details on these changes
+and for general upgrade guidance.
+
+
+Notice of change to the default `git` branch for Synapse
+--------------------------------------------------------
+
+With the release of Synapse 1.13.0, the default `git` branch for Synapse has
+changed to `develop`, which is the development tip. This is more consistent with
+common practice and modern `git` usage.
+
+The `master` branch, which tracks the latest release, is still available. It is
+recommended that developers and distributors who have scripts which run builds
+using the default branch of Synapse should therefore consider pinning their
+scripts to `master`.
+
+
+Internal Changes
+----------------
+
+- Update the version of dh-virtualenv we use to build debs, and add focal to the list of target distributions. ([\#7526](https://github.com/matrix-org/synapse/issues/7526))
+
+
+Synapse 1.13.0rc3 (2020-05-18)
+==============================
+
+Bugfixes
+--------
+
+- Hash passwords as early as possible during registration. ([\#7523](https://github.com/matrix-org/synapse/issues/7523))
+
+
+Synapse 1.13.0rc2 (2020-05-14)
+==============================
+
+Bugfixes
+--------
+
+- Fix a long-standing bug which could cause messages not to be sent over federation, when state events with state keys matching user IDs (such as custom user statuses) were received. ([\#7376](https://github.com/matrix-org/synapse/issues/7376))
+- Restore compatibility with non-compliant clients during the user interactive authentication process, fixing a problem introduced in v1.13.0rc1. ([\#7483](https://github.com/matrix-org/synapse/issues/7483))
+
+Internal Changes
+----------------
+
+- Fix linting errors in new version of Flake8. ([\#7470](https://github.com/matrix-org/synapse/issues/7470))
+
+
+Synapse 1.13.0rc1 (2020-05-11)
+==============================
+
+Features
+--------
+
+- Extend the `web_client_location` option to accept an absolute URL to use as a redirect. Adds a warning when running the web client on the same hostname as homeserver. Contributed by Martin Milata. ([\#7006](https://github.com/matrix-org/synapse/issues/7006))
+- Set `Referrer-Policy` header to `no-referrer` on media downloads. ([\#7009](https://github.com/matrix-org/synapse/issues/7009))
+- Add support for running replication over Redis when using workers. ([\#7040](https://github.com/matrix-org/synapse/issues/7040), [\#7325](https://github.com/matrix-org/synapse/issues/7325), [\#7352](https://github.com/matrix-org/synapse/issues/7352), [\#7401](https://github.com/matrix-org/synapse/issues/7401), [\#7427](https://github.com/matrix-org/synapse/issues/7427), [\#7439](https://github.com/matrix-org/synapse/issues/7439), [\#7446](https://github.com/matrix-org/synapse/issues/7446), [\#7450](https://github.com/matrix-org/synapse/issues/7450), [\#7454](https://github.com/matrix-org/synapse/issues/7454))
+- Admin API `POST /_synapse/admin/v1/join/<roomIdOrAlias>` to join users to a room like `auto_join_rooms` for creation of users. ([\#7051](https://github.com/matrix-org/synapse/issues/7051))
+- Add options to prevent users from changing their profile or associated 3PIDs. ([\#7096](https://github.com/matrix-org/synapse/issues/7096))
+- Support SSO in the user interactive authentication workflow. ([\#7102](https://github.com/matrix-org/synapse/issues/7102), [\#7186](https://github.com/matrix-org/synapse/issues/7186), [\#7279](https://github.com/matrix-org/synapse/issues/7279), [\#7343](https://github.com/matrix-org/synapse/issues/7343))
+- Allow server admins to define and enforce a password policy ([MSC2000](https://github.com/matrix-org/matrix-doc/issues/2000)). ([\#7118](https://github.com/matrix-org/synapse/issues/7118))
+- Improve the support for SSO authentication on the login fallback page. ([\#7152](https://github.com/matrix-org/synapse/issues/7152), [\#7235](https://github.com/matrix-org/synapse/issues/7235))
+- Always whitelist the login fallback in the SSO configuration if `public_baseurl` is set. ([\#7153](https://github.com/matrix-org/synapse/issues/7153))
+- Admin users are no longer required to be in a room to create an alias for it. ([\#7191](https://github.com/matrix-org/synapse/issues/7191))
+- Require admin privileges to enable room encryption by default. This does not affect existing rooms. ([\#7230](https://github.com/matrix-org/synapse/issues/7230))
+- Add a config option for specifying the value of the Accept-Language HTTP header when generating URL previews. ([\#7265](https://github.com/matrix-org/synapse/issues/7265))
+- Allow `/requestToken` endpoints to hide the existence (or lack thereof) of 3PID associations on the homeserver. ([\#7315](https://github.com/matrix-org/synapse/issues/7315))
+- Add a configuration setting to tweak the threshold for dummy events. ([\#7422](https://github.com/matrix-org/synapse/issues/7422))
+
+
+Bugfixes
+--------
+
+- Don't attempt to use an invalid sqlite config if no database configuration is provided. Contributed by @nekatak. ([\#6573](https://github.com/matrix-org/synapse/issues/6573))
+- Fix single-sign on with CAS systems: pass the same service URL when requesting the CAS ticket and when calling the `proxyValidate` URL. Contributed by @Naugrimm. ([\#6634](https://github.com/matrix-org/synapse/issues/6634))
+- Fix missing field `default` when fetching user-defined push rules. ([\#6639](https://github.com/matrix-org/synapse/issues/6639))
+- Improve error responses when accessing remote public room lists. ([\#6899](https://github.com/matrix-org/synapse/issues/6899), [\#7368](https://github.com/matrix-org/synapse/issues/7368))
+- Transfer alias mappings on room upgrade. ([\#6946](https://github.com/matrix-org/synapse/issues/6946))
+- Ensure that a user interactive authentication session is tied to a single request. ([\#7068](https://github.com/matrix-org/synapse/issues/7068), [\#7455](https://github.com/matrix-org/synapse/issues/7455))
+- Fix a bug in the federation API which could cause occasional "Failed to get PDU" errors. ([\#7089](https://github.com/matrix-org/synapse/issues/7089))
+- Return the proper error (`M_BAD_ALIAS`) when a non-existant canonical alias is provided. ([\#7109](https://github.com/matrix-org/synapse/issues/7109))
+- Fix a bug which meant that groups updates were not correctly replicated between workers. ([\#7117](https://github.com/matrix-org/synapse/issues/7117))
+- Fix starting workers when federation sending not split out. ([\#7133](https://github.com/matrix-org/synapse/issues/7133))
+- Ensure `is_verified` is a boolean in responses to `GET /_matrix/client/r0/room_keys/keys`. Also warn the user if they forgot the `version` query param. ([\#7150](https://github.com/matrix-org/synapse/issues/7150))
+- Fix error page being shown when a custom SAML handler attempted to redirect when processing an auth response. ([\#7151](https://github.com/matrix-org/synapse/issues/7151))
+- Avoid importing `sqlite3` when using the postgres backend. Contributed by David Vo. ([\#7155](https://github.com/matrix-org/synapse/issues/7155))
+- Fix excessive CPU usage by `prune_old_outbound_device_pokes` job. ([\#7159](https://github.com/matrix-org/synapse/issues/7159))
+- Fix a bug which could cause outbound federation traffic to stop working if a client uploaded an incorrect e2e device signature. ([\#7177](https://github.com/matrix-org/synapse/issues/7177))
+- Fix a bug which could cause incorrect 'cyclic dependency' error. ([\#7178](https://github.com/matrix-org/synapse/issues/7178))
+- Fix a bug that could cause a user to be invited to a server notices (aka System Alerts) room without any notice being sent. ([\#7199](https://github.com/matrix-org/synapse/issues/7199))
+- Fix some worker-mode replication handling not being correctly recorded in CPU usage stats. ([\#7203](https://github.com/matrix-org/synapse/issues/7203))
+- Do not allow a deactivated user to login via SSO. ([\#7240](https://github.com/matrix-org/synapse/issues/7240), [\#7259](https://github.com/matrix-org/synapse/issues/7259))
+- Fix --help command-line argument. ([\#7249](https://github.com/matrix-org/synapse/issues/7249))
+- Fix room publish permissions not being checked on room creation. ([\#7260](https://github.com/matrix-org/synapse/issues/7260))
+- Reject unknown session IDs during user interactive authentication instead of silently creating a new session. ([\#7268](https://github.com/matrix-org/synapse/issues/7268))
+- Fix a SQL query introduced in Synapse 1.12.0 which could cause large amounts of logging to the postgres slow-query log. ([\#7274](https://github.com/matrix-org/synapse/issues/7274))
+- Persist user interactive authentication sessions across workers and Synapse restarts. ([\#7302](https://github.com/matrix-org/synapse/issues/7302))
+- Fixed backwards compatibility logic of the first value of `trusted_third_party_id_servers` being used for `account_threepid_delegates.email`, which occurs when the former, deprecated option is set and the latter is not. ([\#7316](https://github.com/matrix-org/synapse/issues/7316))
+- Fix a bug where event updates might not be sent over replication to worker processes after the stream falls behind. ([\#7337](https://github.com/matrix-org/synapse/issues/7337), [\#7358](https://github.com/matrix-org/synapse/issues/7358))
+- Fix bad error handling that would cause Synapse to crash if it's provided with a YAML configuration file that's either empty or doesn't parse into a key-value map. ([\#7341](https://github.com/matrix-org/synapse/issues/7341))
+- Fix incorrect metrics reporting for `renew_attestations` background task. ([\#7344](https://github.com/matrix-org/synapse/issues/7344))
+- Prevent non-federating rooms from appearing in responses to federated `POST /publicRoom` requests when a filter was included. ([\#7367](https://github.com/matrix-org/synapse/issues/7367))
+- Fix a bug which would cause the room durectory to be incorrectly populated if Synapse was upgraded directly from v1.2.1 or earlier to v1.4.0 or later. Note that this fix does not apply retrospectively; see the [upgrade notes](UPGRADE.rst#upgrading-to-v1130) for more information. ([\#7387](https://github.com/matrix-org/synapse/issues/7387))
+- Fix bug in `EventContext.deserialize`. ([\#7393](https://github.com/matrix-org/synapse/issues/7393))
+
+
+Improved Documentation
+----------------------
+
+- Update Debian installation instructions to recommend installing the `virtualenv` package instead of `python3-virtualenv`. ([\#6892](https://github.com/matrix-org/synapse/issues/6892))
+- Improve the documentation for database configuration. ([\#6988](https://github.com/matrix-org/synapse/issues/6988))
+- Improve the documentation of application service configuration files. ([\#7091](https://github.com/matrix-org/synapse/issues/7091))
+- Update pre-built package name for FreeBSD. ([\#7107](https://github.com/matrix-org/synapse/issues/7107))
+- Update postgres docs with login troubleshooting information. ([\#7119](https://github.com/matrix-org/synapse/issues/7119))
+- Clean up INSTALL.md a bit. ([\#7141](https://github.com/matrix-org/synapse/issues/7141))
+- Add documentation for running a local CAS server for testing. ([\#7147](https://github.com/matrix-org/synapse/issues/7147))
+- Improve README.md by being explicit about public IP recommendation for TURN relaying. ([\#7167](https://github.com/matrix-org/synapse/issues/7167))
+- Fix a small typo in the `metrics_flags` config option. ([\#7171](https://github.com/matrix-org/synapse/issues/7171))
+- Update the contributed documentation on managing synapse workers with systemd, and bring it into the core distribution. ([\#7234](https://github.com/matrix-org/synapse/issues/7234))
+- Add documentation to the `password_providers` config option. Add known password provider implementations to docs. ([\#7238](https://github.com/matrix-org/synapse/issues/7238), [\#7248](https://github.com/matrix-org/synapse/issues/7248))
+- Modify suggested nginx reverse proxy configuration to match Synapse's default file upload size. Contributed by @ProCycleDev. ([\#7251](https://github.com/matrix-org/synapse/issues/7251))
+- Documentation of media_storage_providers options updated to avoid misunderstandings. Contributed by Tristan Lins. ([\#7272](https://github.com/matrix-org/synapse/issues/7272))
+- Add documentation on monitoring workers with Prometheus. ([\#7357](https://github.com/matrix-org/synapse/issues/7357))
+- Clarify endpoint usage in the users admin api documentation. ([\#7361](https://github.com/matrix-org/synapse/issues/7361))
+
+
+Deprecations and Removals
+-------------------------
+
+- Remove nonfunctional `captcha_bypass_secret` option from `homeserver.yaml`. ([\#7137](https://github.com/matrix-org/synapse/issues/7137))
+
+
+Internal Changes
+----------------
+
+- Add benchmarks for LruCache. ([\#6446](https://github.com/matrix-org/synapse/issues/6446))
+- Return total number of users and profile attributes in admin users endpoint. Contributed by Awesome Technologies Innovationslabor GmbH. ([\#6881](https://github.com/matrix-org/synapse/issues/6881))
+- Change device list streams to have one row per ID. ([\#7010](https://github.com/matrix-org/synapse/issues/7010))
+- Remove concept of a non-limited stream. ([\#7011](https://github.com/matrix-org/synapse/issues/7011))
+- Move catchup of replication streams logic to worker. ([\#7024](https://github.com/matrix-org/synapse/issues/7024), [\#7195](https://github.com/matrix-org/synapse/issues/7195), [\#7226](https://github.com/matrix-org/synapse/issues/7226), [\#7239](https://github.com/matrix-org/synapse/issues/7239), [\#7286](https://github.com/matrix-org/synapse/issues/7286), [\#7290](https://github.com/matrix-org/synapse/issues/7290), [\#7318](https://github.com/matrix-org/synapse/issues/7318), [\#7326](https://github.com/matrix-org/synapse/issues/7326), [\#7378](https://github.com/matrix-org/synapse/issues/7378), [\#7421](https://github.com/matrix-org/synapse/issues/7421))
+- Convert some of synapse.rest.media to async/await. ([\#7110](https://github.com/matrix-org/synapse/issues/7110), [\#7184](https://github.com/matrix-org/synapse/issues/7184), [\#7241](https://github.com/matrix-org/synapse/issues/7241))
+- De-duplicate / remove unused REST code for login and auth. ([\#7115](https://github.com/matrix-org/synapse/issues/7115))
+- Convert `*StreamRow` classes to inner classes. ([\#7116](https://github.com/matrix-org/synapse/issues/7116))
+- Clean up some LoggingContext code. ([\#7120](https://github.com/matrix-org/synapse/issues/7120), [\#7181](https://github.com/matrix-org/synapse/issues/7181), [\#7183](https://github.com/matrix-org/synapse/issues/7183), [\#7408](https://github.com/matrix-org/synapse/issues/7408), [\#7426](https://github.com/matrix-org/synapse/issues/7426))
+- Add explicit `instance_id` for USER_SYNC commands and remove implicit `conn_id` usage. ([\#7128](https://github.com/matrix-org/synapse/issues/7128))
+- Refactored the CAS authentication logic to a separate class. ([\#7136](https://github.com/matrix-org/synapse/issues/7136))
+- Run replication streamers on workers. ([\#7146](https://github.com/matrix-org/synapse/issues/7146))
+- Add tests for outbound device pokes. ([\#7157](https://github.com/matrix-org/synapse/issues/7157))
+- Fix device list update stream ids going backward. ([\#7158](https://github.com/matrix-org/synapse/issues/7158))
+- Use `stream.current_token()` and remove `stream_positions()`. ([\#7172](https://github.com/matrix-org/synapse/issues/7172))
+- Move client command handling out of TCP protocol. ([\#7185](https://github.com/matrix-org/synapse/issues/7185))
+- Move server command handling out of TCP protocol. ([\#7187](https://github.com/matrix-org/synapse/issues/7187))
+- Fix consistency of HTTP status codes reported in log lines. ([\#7188](https://github.com/matrix-org/synapse/issues/7188))
+- Only run one background database update at a time. ([\#7190](https://github.com/matrix-org/synapse/issues/7190))
+- Remove sent outbound device list pokes from the database. ([\#7192](https://github.com/matrix-org/synapse/issues/7192))
+- Add a background database update job to clear out duplicate `device_lists_outbound_pokes`. ([\#7193](https://github.com/matrix-org/synapse/issues/7193))
+- Remove some extraneous debugging log lines. ([\#7207](https://github.com/matrix-org/synapse/issues/7207))
+- Add explicit Python build tooling as dependencies for the snapcraft build. ([\#7213](https://github.com/matrix-org/synapse/issues/7213))
+- Add typing information to federation server code. ([\#7219](https://github.com/matrix-org/synapse/issues/7219))
+- Extend room admin api (`GET /_synapse/admin/v1/rooms`) with additional attributes. ([\#7225](https://github.com/matrix-org/synapse/issues/7225))
+- Unblacklist '/upgrade creates a new room' sytest for workers. ([\#7228](https://github.com/matrix-org/synapse/issues/7228))
+- Remove redundant checks on `daemonize` from synctl. ([\#7233](https://github.com/matrix-org/synapse/issues/7233))
+- Upgrade jQuery to v3.4.1 on fallback login/registration pages. ([\#7236](https://github.com/matrix-org/synapse/issues/7236))
+- Change log line that told user to implement onLogin/onRegister fallback js functions to a warning, instead of an info, so it's more visible. ([\#7237](https://github.com/matrix-org/synapse/issues/7237))
+- Correct the parameters of a test fixture. Contributed by Isaiah Singletary. ([\#7243](https://github.com/matrix-org/synapse/issues/7243))
+- Convert auth handler to async/await. ([\#7261](https://github.com/matrix-org/synapse/issues/7261))
+- Add some unit tests for replication. ([\#7278](https://github.com/matrix-org/synapse/issues/7278))
+- Improve typing annotations in `synapse.replication.tcp.streams.Stream`. ([\#7291](https://github.com/matrix-org/synapse/issues/7291))
+- Reduce log verbosity of url cache cleanup tasks. ([\#7295](https://github.com/matrix-org/synapse/issues/7295))
+- Fix sample SAML Service Provider configuration. Contributed by @frcl. ([\#7300](https://github.com/matrix-org/synapse/issues/7300))
+- Fix StreamChangeCache to work with multiple entities changing on the same stream id. ([\#7303](https://github.com/matrix-org/synapse/issues/7303))
+- Fix an incorrect import in IdentityHandler. ([\#7319](https://github.com/matrix-org/synapse/issues/7319))
+- Reduce logging verbosity for successful federation requests. ([\#7321](https://github.com/matrix-org/synapse/issues/7321))
+- Convert some federation handler code to async/await. ([\#7338](https://github.com/matrix-org/synapse/issues/7338))
+- Fix collation for postgres for unit tests. ([\#7359](https://github.com/matrix-org/synapse/issues/7359))
+- Convert RegistrationWorkerStore.is_server_admin and dependent code to async/await. ([\#7363](https://github.com/matrix-org/synapse/issues/7363))
+- Add an `instance_name` to `RDATA` and `POSITION` replication commands. ([\#7364](https://github.com/matrix-org/synapse/issues/7364))
+- Thread through instance name to replication client. ([\#7369](https://github.com/matrix-org/synapse/issues/7369))
+- Convert synapse.server_notices to async/await. ([\#7394](https://github.com/matrix-org/synapse/issues/7394))
+- Convert synapse.notifier to async/await. ([\#7395](https://github.com/matrix-org/synapse/issues/7395))
+- Fix issues with the Python package manifest. ([\#7404](https://github.com/matrix-org/synapse/issues/7404))
+- Prevent methods in `synapse.handlers.auth` from polling the homeserver config every request. ([\#7420](https://github.com/matrix-org/synapse/issues/7420))
+- Speed up fetching device lists changes when handling `/sync` requests. ([\#7423](https://github.com/matrix-org/synapse/issues/7423))
+- Run group attestation renewal in series rather than parallel for performance. ([\#7442](https://github.com/matrix-org/synapse/issues/7442))
+
+
+Synapse 1.12.4 (2020-04-23)
+===========================
+
+No significant changes.
+
+
+Synapse 1.12.4rc1 (2020-04-22)
+==============================
+
+Features
+--------
+
+- Always send users their own device updates. ([\#7160](https://github.com/matrix-org/synapse/issues/7160))
+- Add support for handling GET requests for `account_data` on a worker. ([\#7311](https://github.com/matrix-org/synapse/issues/7311))
+
+
+Bugfixes
+--------
+
+- Fix a bug that prevented cross-signing with users on worker-mode synapses. ([\#7255](https://github.com/matrix-org/synapse/issues/7255))
+- Do not treat display names as globs in push rules. ([\#7271](https://github.com/matrix-org/synapse/issues/7271))
+- Fix a bug with cross-signing devices belonging to remote users who did not share a room with any user on the local homeserver. ([\#7289](https://github.com/matrix-org/synapse/issues/7289))
+
+Synapse 1.12.3 (2020-04-03)
+===========================
+
+- Remove the the pin to Pillow 7.0 which was introduced in Synapse 1.12.2, and
+correctly fix the issue with building the Debian packages. ([\#7212](https://github.com/matrix-org/synapse/issues/7212))
+
+Synapse 1.12.2 (2020-04-02)
+===========================
+
+This release works around [an issue](https://github.com/matrix-org/synapse/issues/7208) with building the debian packages.
+
+No other significant changes since 1.12.1.
+
+Synapse 1.12.1 (2020-04-02)
+===========================
+
+No significant changes since 1.12.1rc1.
+
+
+Synapse 1.12.1rc1 (2020-03-31)
+==============================
+
+Bugfixes
+--------
+
+- Fix starting workers when federation sending not split out. ([\#7133](https://github.com/matrix-org/synapse/issues/7133)). Introduced in v1.12.0.
+- Avoid importing `sqlite3` when using the postgres backend. Contributed by David Vo. ([\#7155](https://github.com/matrix-org/synapse/issues/7155)). Introduced in v1.12.0rc1.
+- Fix a bug which could cause outbound federation traffic to stop working if a client uploaded an incorrect e2e device signature. ([\#7177](https://github.com/matrix-org/synapse/issues/7177)). Introduced in v1.11.0.
+
+Synapse 1.12.0 (2020-03-23)
+===========================
+
+Debian packages and Docker images are rebuilt using the latest versions of
+dependency libraries, including Twisted 20.3.0. **Please see security advisory
+below**.
+
+Potential slow database update during upgrade
+---------------------------------------------
+
+Synapse 1.12.0 includes a database update which is run as part of the upgrade,
+and which may take some time (several hours in the case of a large
+server). Synapse will not respond to HTTP requests while this update is taking
+place. For imformation on seeing if you are affected, and workaround if you
+are, see the [upgrade notes](UPGRADE.rst#upgrading-to-v1120).
+
+Security advisory
+-----------------
+
+Synapse may be vulnerable to request-smuggling attacks when it is used with a
+reverse-proxy. The vulnerabilties are fixed in Twisted 20.3.0, and are
+described in
+[CVE-2020-10108](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-10108)
+and
+[CVE-2020-10109](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-10109).
+For a good introduction to this class of request-smuggling attacks, see
+https://portswigger.net/research/http-desync-attacks-request-smuggling-reborn.
+
+We are not aware of these vulnerabilities being exploited in the wild, and
+do not believe that they are exploitable with current versions of any reverse
+proxies. Nevertheless, we recommend that all Synapse administrators ensure that
+they have the latest versions of the Twisted library to ensure that their
+installation remains secure.
+
+* Administrators using the [`matrix.org` Docker
+  image](https://hub.docker.com/r/matrixdotorg/synapse/) or the [Debian/Ubuntu
+  packages from
+  `matrix.org`](https://github.com/matrix-org/synapse/blob/master/INSTALL.md#matrixorg-packages)
+  should ensure that they have version 1.12.0 installed: these images include
+  Twisted 20.3.0.
+* Administrators who have [installed Synapse from
+  source](https://github.com/matrix-org/synapse/blob/master/INSTALL.md#installing-from-source)
+  should upgrade Twisted within their virtualenv by running:
+  ```sh
+  <path_to_virtualenv>/bin/pip install 'Twisted>=20.3.0'
+  ```
+* Administrators who have installed Synapse from distribution packages should
+  consult the information from their distributions.
+
+The `matrix.org` Synapse instance was not vulnerable to these vulnerabilities.
+
+Advance notice of change to the default `git` branch for Synapse
+----------------------------------------------------------------
+
+Currently, the default `git` branch for Synapse is `master`, which tracks the
+latest release.
+
+After the release of Synapse 1.13.0, we intend to change this default to
+`develop`, which is the development tip. This is more consistent with common
+practice and modern `git` usage.
+
+Although we try to keep `develop` in a stable state, there may be occasions
+where regressions creep in. Developers and distributors who have scripts which
+run builds using the default branch of `Synapse` should therefore consider
+pinning their scripts to `master`.
+
+
+Synapse 1.12.0rc1 (2020-03-19)
+==============================
+
+Features
+--------
+
+- Changes related to room alias management ([MSC2432](https://github.com/matrix-org/matrix-doc/pull/2432)):
+  - Publishing/removing a room from the room directory now requires the user to have a power level capable of modifying the canonical alias, instead of the room aliases. ([\#6965](https://github.com/matrix-org/synapse/issues/6965))
+  - Validate the `alt_aliases` property of canonical alias events. ([\#6971](https://github.com/matrix-org/synapse/issues/6971))
+  - Users with a power level sufficient to modify the canonical alias of a room can now delete room aliases. ([\#6986](https://github.com/matrix-org/synapse/issues/6986))
+  - Implement updated authorization rules and redaction rules for aliases events, from [MSC2261](https://github.com/matrix-org/matrix-doc/pull/2261) and [MSC2432](https://github.com/matrix-org/matrix-doc/pull/2432). ([\#7037](https://github.com/matrix-org/synapse/issues/7037))
+  - Stop sending m.room.aliases events during room creation and upgrade. ([\#6941](https://github.com/matrix-org/synapse/issues/6941))
+  - Synapse no longer uses room alias events to calculate room names for push notifications. ([\#6966](https://github.com/matrix-org/synapse/issues/6966))
+  - The room list endpoint no longer returns a list of aliases. ([\#6970](https://github.com/matrix-org/synapse/issues/6970))
+  - Remove special handling of aliases events from [MSC2260](https://github.com/matrix-org/matrix-doc/pull/2260) added in v1.10.0rc1. ([\#7034](https://github.com/matrix-org/synapse/issues/7034))
+- Expose the `synctl`, `hash_password` and `generate_config` commands in the snapcraft package. Contributed by @devec0. ([\#6315](https://github.com/matrix-org/synapse/issues/6315))
+- Check that server_name is correctly set before running database updates. ([\#6982](https://github.com/matrix-org/synapse/issues/6982))
+- Break down monthly active users by `appservice_id` and emit via Prometheus. ([\#7030](https://github.com/matrix-org/synapse/issues/7030))
+- Render a configurable and comprehensible error page if something goes wrong during the SAML2 authentication process. ([\#7058](https://github.com/matrix-org/synapse/issues/7058), [\#7067](https://github.com/matrix-org/synapse/issues/7067))
+- Add an optional parameter to control whether other sessions are logged out when a user's password is modified. ([\#7085](https://github.com/matrix-org/synapse/issues/7085))
+- Add prometheus metrics for the number of active pushers. ([\#7103](https://github.com/matrix-org/synapse/issues/7103), [\#7106](https://github.com/matrix-org/synapse/issues/7106))
+- Improve performance when making HTTPS requests to sygnal, sydent, etc, by sharing the SSL context object between connections. ([\#7094](https://github.com/matrix-org/synapse/issues/7094))
+
+
+Bugfixes
+--------
+
+- When a user's profile is updated via the admin API, also generate a displayname/avatar update for that user in each room. ([\#6572](https://github.com/matrix-org/synapse/issues/6572))
+- Fix a couple of bugs in email configuration handling. ([\#6962](https://github.com/matrix-org/synapse/issues/6962))
+- Fix an issue affecting worker-based deployments where replication would stop working, necessitating a full restart, after joining a large room. ([\#6967](https://github.com/matrix-org/synapse/issues/6967))
+- Fix `duplicate key` error which was logged when rejoining a room over federation. ([\#6968](https://github.com/matrix-org/synapse/issues/6968))
+- Prevent user from setting 'deactivated' to anything other than a bool on the v2 PUT /users Admin API. ([\#6990](https://github.com/matrix-org/synapse/issues/6990))
+- Fix py35-old CI by using native tox package. ([\#7018](https://github.com/matrix-org/synapse/issues/7018))
+- Fix a bug causing `org.matrix.dummy_event` to be included in responses from `/sync`. ([\#7035](https://github.com/matrix-org/synapse/issues/7035))
+- Fix a bug that renders UTF-8 text files incorrectly when loaded from media. Contributed by @TheStranjer. ([\#7044](https://github.com/matrix-org/synapse/issues/7044))
+- Fix a bug that would cause Synapse to respond with an error about event visibility if a client tried to request the state of a room at a given token. ([\#7066](https://github.com/matrix-org/synapse/issues/7066))
+- Repair a data-corruption issue which was introduced in Synapse 1.10, and fixed in Synapse 1.11, and which could cause `/sync` to return with 404 errors about missing events and unknown rooms. ([\#7070](https://github.com/matrix-org/synapse/issues/7070))
+- Fix a bug causing account validity renewal emails to be sent even if the feature is turned off in some cases. ([\#7074](https://github.com/matrix-org/synapse/issues/7074))
+
+
+Improved Documentation
+----------------------
+
+- Updated CentOS8 install instructions. Contributed by Richard Kellner. ([\#6925](https://github.com/matrix-org/synapse/issues/6925))
+- Fix `POSTGRES_INITDB_ARGS` in the `contrib/docker/docker-compose.yml` example docker-compose configuration. ([\#6984](https://github.com/matrix-org/synapse/issues/6984))
+- Change date in [INSTALL.md](./INSTALL.md#tls-certificates) for last date of getting TLS certificates to November 2019. ([\#7015](https://github.com/matrix-org/synapse/issues/7015))
+- Document that the fallback auth endpoints must be routed to the same worker node as the register endpoints. ([\#7048](https://github.com/matrix-org/synapse/issues/7048))
+
+
+Deprecations and Removals
+-------------------------
+
+- Remove the unused query_auth federation endpoint per [MSC2451](https://github.com/matrix-org/matrix-doc/pull/2451). ([\#7026](https://github.com/matrix-org/synapse/issues/7026))
+
+
+Internal Changes
+----------------
+
+- Add type hints to `logging/context.py`. ([\#6309](https://github.com/matrix-org/synapse/issues/6309))
+- Add some clarifications to `README.md` in the database schema directory. ([\#6615](https://github.com/matrix-org/synapse/issues/6615))
+- Refactoring work in preparation for changing the event redaction algorithm. ([\#6874](https://github.com/matrix-org/synapse/issues/6874), [\#6875](https://github.com/matrix-org/synapse/issues/6875), [\#6983](https://github.com/matrix-org/synapse/issues/6983), [\#7003](https://github.com/matrix-org/synapse/issues/7003))
+- Improve performance of v2 state resolution for large rooms. ([\#6952](https://github.com/matrix-org/synapse/issues/6952), [\#7095](https://github.com/matrix-org/synapse/issues/7095))
+- Reduce time spent doing GC, by freezing objects on startup. ([\#6953](https://github.com/matrix-org/synapse/issues/6953))
+- Minor perfermance fixes to `get_auth_chain_ids`. ([\#6954](https://github.com/matrix-org/synapse/issues/6954))
+- Don't record remote cross-signing keys in the `devices` table. ([\#6956](https://github.com/matrix-org/synapse/issues/6956))
+- Use flake8-comprehensions to enforce good hygiene of list/set/dict comprehensions. ([\#6957](https://github.com/matrix-org/synapse/issues/6957))
+- Merge worker apps together. ([\#6964](https://github.com/matrix-org/synapse/issues/6964), [\#7002](https://github.com/matrix-org/synapse/issues/7002), [\#7055](https://github.com/matrix-org/synapse/issues/7055), [\#7104](https://github.com/matrix-org/synapse/issues/7104))
+- Remove redundant `store_room` call from `FederationHandler._process_received_pdu`. ([\#6979](https://github.com/matrix-org/synapse/issues/6979))
+- Update warning for incorrect database collation/ctype to include link to documentation. ([\#6985](https://github.com/matrix-org/synapse/issues/6985))
+- Add some type annotations to the database storage classes. ([\#6987](https://github.com/matrix-org/synapse/issues/6987))
+- Port `synapse.handlers.presence` to async/await. ([\#6991](https://github.com/matrix-org/synapse/issues/6991), [\#7019](https://github.com/matrix-org/synapse/issues/7019))
+- Add some type annotations to the federation base & client classes. ([\#6995](https://github.com/matrix-org/synapse/issues/6995))
+- Port `synapse.rest.keys` to async/await. ([\#7020](https://github.com/matrix-org/synapse/issues/7020))
+- Add a type check to `is_verified` when processing room keys. ([\#7045](https://github.com/matrix-org/synapse/issues/7045))
+- Add type annotations and comments to the auth handler. ([\#7063](https://github.com/matrix-org/synapse/issues/7063))
+
+
+Synapse 1.11.1 (2020-03-03)
+===========================
+
+This release includes a security fix impacting installations using Single Sign-On (i.e. SAML2 or CAS) for authentication. Administrators of such installations are encouraged to upgrade as soon as possible.
+
+The release also includes fixes for a couple of other bugs.
+
+Bugfixes
+--------
+
+- Add a confirmation step to the SSO login flow before redirecting users to the redirect URL. ([b2bd54a2](https://github.com/matrix-org/synapse/commit/b2bd54a2e31d9a248f73fadb184ae9b4cbdb49f9), [65c73cdf](https://github.com/matrix-org/synapse/commit/65c73cdfec1876a9fec2fd2c3a74923cd146fe0b), [a0178df1](https://github.com/matrix-org/synapse/commit/a0178df10422a76fd403b82d2b2a4ed28a9a9d1e))
+- Fixed set a user as an admin with the admin API `PUT /_synapse/admin/v2/users/<user_id>`. Contributed by @dklimpel. ([\#6910](https://github.com/matrix-org/synapse/issues/6910))
+- Fix bug introduced in Synapse 1.11.0 which sometimes caused errors when joining rooms over federation, with `'coroutine' object has no attribute 'event_id'`. ([\#6996](https://github.com/matrix-org/synapse/issues/6996))
+
+
+Synapse 1.11.0 (2020-02-21)
+===========================
+
+Improved Documentation
+----------------------
+
+- Small grammatical fixes to the ACME v1 deprecation notice. ([\#6944](https://github.com/matrix-org/synapse/issues/6944))
+
+
+Synapse 1.11.0rc1 (2020-02-19)
+==============================
+
+Features
+--------
+
+- Admin API to add or modify threepids of user accounts. ([\#6769](https://github.com/matrix-org/synapse/issues/6769))
+- Limit the number of events that can be requested by the backfill federation API to 100. ([\#6864](https://github.com/matrix-org/synapse/issues/6864))
+- Add ability to run some group APIs on workers. ([\#6866](https://github.com/matrix-org/synapse/issues/6866))
+- Reject device display names over 100 characters in length to prevent abuse. ([\#6882](https://github.com/matrix-org/synapse/issues/6882))
+- Add ability to route federation user device queries to workers. ([\#6873](https://github.com/matrix-org/synapse/issues/6873))
+- The result of a user directory search can now be filtered via the spam checker. ([\#6888](https://github.com/matrix-org/synapse/issues/6888))
+- Implement new `GET /_matrix/client/unstable/org.matrix.msc2432/rooms/{roomId}/aliases` endpoint as per [MSC2432](https://github.com/matrix-org/matrix-doc/pull/2432). ([\#6939](https://github.com/matrix-org/synapse/issues/6939), [\#6948](https://github.com/matrix-org/synapse/issues/6948), [\#6949](https://github.com/matrix-org/synapse/issues/6949))
+- Stop sending `m.room.alias` events wheng adding / removing aliases. Check `alt_aliases` in the latest `m.room.canonical_alias` event when deleting an alias. ([\#6904](https://github.com/matrix-org/synapse/issues/6904))
+- Change the default power levels of invites, tombstones and server ACLs for new rooms. ([\#6834](https://github.com/matrix-org/synapse/issues/6834))
+
+Bugfixes
+--------
+
+- Fixed third party event rules function `on_create_room`'s return value being ignored. ([\#6781](https://github.com/matrix-org/synapse/issues/6781))
+- Allow URL-encoded User IDs on `/_synapse/admin/v2/users/<user_id>[/admin]` endpoints. Thanks to @NHAS for reporting. ([\#6825](https://github.com/matrix-org/synapse/issues/6825))
+- Fix Synapse refusing to start if `federation_certificate_verification_whitelist` option is blank. ([\#6849](https://github.com/matrix-org/synapse/issues/6849))
+- Fix errors from logging in the purge jobs related to the message retention policies support. ([\#6945](https://github.com/matrix-org/synapse/issues/6945))
+- Return a 404 instead of 200 for querying information of a non-existant user through the admin API. ([\#6901](https://github.com/matrix-org/synapse/issues/6901))
+
+
+Updates to the Docker image
+---------------------------
+
+- The deprecated "generate-config-on-the-fly" mode is no longer supported. ([\#6918](https://github.com/matrix-org/synapse/issues/6918))
+
+
+Improved Documentation
+----------------------
+
+- Add details of PR merge strategy to contributing docs. ([\#6846](https://github.com/matrix-org/synapse/issues/6846))
+- Spell out that the last event sent to a room won't be deleted by a purge. ([\#6891](https://github.com/matrix-org/synapse/issues/6891))
+- Update Synapse's documentation to warn about the deprecation of ACME v1. ([\#6905](https://github.com/matrix-org/synapse/issues/6905), [\#6907](https://github.com/matrix-org/synapse/issues/6907), [\#6909](https://github.com/matrix-org/synapse/issues/6909))
+- Add documentation for the spam checker. ([\#6906](https://github.com/matrix-org/synapse/issues/6906))
+- Fix worker docs to point `/publicised_groups` API correctly. ([\#6938](https://github.com/matrix-org/synapse/issues/6938))
+- Clean up and update docs on setting up federation. ([\#6940](https://github.com/matrix-org/synapse/issues/6940))
+- Add a warning about indentation to generated configuration files. ([\#6920](https://github.com/matrix-org/synapse/issues/6920))
+- Databases created using the compose file in contrib/docker will now always have correct encoding and locale settings. Contributed by Fridtjof Mund. ([\#6921](https://github.com/matrix-org/synapse/issues/6921))
+- Update pip install directions in readme to avoid error when using zsh. ([\#6855](https://github.com/matrix-org/synapse/issues/6855))
+
+
+Deprecations and Removals
+-------------------------
+
+- Remove `m.lazy_load_members` from `unstable_features` since lazy loading is in the stable Client-Server API version r0.5.0. ([\#6877](https://github.com/matrix-org/synapse/issues/6877))
+
+
+Internal Changes
+----------------
+
+- Add type hints to `SyncHandler`. ([\#6821](https://github.com/matrix-org/synapse/issues/6821))
+- Refactoring work in preparation for changing the event redaction algorithm. ([\#6823](https://github.com/matrix-org/synapse/issues/6823), [\#6827](https://github.com/matrix-org/synapse/issues/6827), [\#6854](https://github.com/matrix-org/synapse/issues/6854), [\#6856](https://github.com/matrix-org/synapse/issues/6856), [\#6857](https://github.com/matrix-org/synapse/issues/6857), [\#6858](https://github.com/matrix-org/synapse/issues/6858))
+- Fix stacktraces when using `ObservableDeferred` and async/await. ([\#6836](https://github.com/matrix-org/synapse/issues/6836))
+- Port much of `synapse.handlers.federation` to async/await. ([\#6837](https://github.com/matrix-org/synapse/issues/6837), [\#6840](https://github.com/matrix-org/synapse/issues/6840))
+- Populate `rooms.room_version` database column at startup, rather than in a background update. ([\#6847](https://github.com/matrix-org/synapse/issues/6847))
+- Reduce amount we log at `INFO` level. ([\#6833](https://github.com/matrix-org/synapse/issues/6833), [\#6862](https://github.com/matrix-org/synapse/issues/6862))
+- Remove unused `get_room_stats_state` method. ([\#6869](https://github.com/matrix-org/synapse/issues/6869))
+- Add typing to `synapse.federation.sender` and port to async/await. ([\#6871](https://github.com/matrix-org/synapse/issues/6871))
+- Refactor `_EventInternalMetadata` object to improve type safety. ([\#6872](https://github.com/matrix-org/synapse/issues/6872))
+- Add an additional entry to the SyTest blacklist for worker mode. ([\#6883](https://github.com/matrix-org/synapse/issues/6883))
+- Fix the use of sed in the linting scripts when using BSD sed. ([\#6887](https://github.com/matrix-org/synapse/issues/6887))
+- Add type hints to the spam checker module. ([\#6915](https://github.com/matrix-org/synapse/issues/6915))
+- Convert the directory handler tests to use HomeserverTestCase. ([\#6919](https://github.com/matrix-org/synapse/issues/6919))
+- Increase DB/CPU perf of `_is_server_still_joined` check. ([\#6936](https://github.com/matrix-org/synapse/issues/6936))
+- Tiny optimisation for incoming HTTP request dispatch. ([\#6950](https://github.com/matrix-org/synapse/issues/6950))
+
+
+Synapse 1.10.1 (2020-02-17)
+===========================
+
+Bugfixes
+--------
+
+- Fix a bug introduced in Synapse 1.10.0 which would cause room state to be cleared in the database if Synapse was upgraded direct from 1.2.1 or earlier to 1.10.0. ([\#6924](https://github.com/matrix-org/synapse/issues/6924))
+
+
+Synapse 1.10.0 (2020-02-12)
+===========================
+
+**WARNING to client developers**: As of this release Synapse validates `client_secret` parameters in the Client-Server API as per the spec. See [\#6766](https://github.com/matrix-org/synapse/issues/6766) for details.
+
+Updates to the Docker image
+---------------------------
+
+- Update the docker images to Alpine Linux 3.11. ([\#6897](https://github.com/matrix-org/synapse/issues/6897))
+
+
+Synapse 1.10.0rc5 (2020-02-11)
+==============================
+
+Bugfixes
+--------
+
+- Fix the filtering introduced in 1.10.0rc3 to also apply to the state blocks returned by `/sync`. ([\#6884](https://github.com/matrix-org/synapse/issues/6884))
+
+Synapse 1.10.0rc4 (2020-02-11)
+==============================
+
+This release candidate was built incorrectly and is superceded by 1.10.0rc5.
+
+Synapse 1.10.0rc3 (2020-02-10)
+==============================
+
+Features
+--------
+
+- Filter out `m.room.aliases` from the CS API to mitigate abuse while a better solution is specced. ([\#6878](https://github.com/matrix-org/synapse/issues/6878))
+
+
+Internal Changes
+----------------
+
+- Fix continuous integration failures with old versions of `pip`, which were introduced by a release of the `zipp` library. ([\#6880](https://github.com/matrix-org/synapse/issues/6880))
+
+
+Synapse 1.10.0rc2 (2020-02-06)
+==============================
+
+Bugfixes
+--------
+
+- Fix an issue with cross-signing where device signatures were not sent to remote servers. ([\#6844](https://github.com/matrix-org/synapse/issues/6844))
+- Fix to the unknown remote device detection which was introduced in 1.10.rc1. ([\#6848](https://github.com/matrix-org/synapse/issues/6848))
+
+
+Internal Changes
+----------------
+
+- Detect unexpected sender keys on remote encrypted events and resync device lists. ([\#6850](https://github.com/matrix-org/synapse/issues/6850))
+
+
+Synapse 1.10.0rc1 (2020-01-31)
+==============================
+
+Features
+--------
+
+- Add experimental support for updated authorization rules for aliases events, from [MSC2260](https://github.com/matrix-org/matrix-doc/pull/2260). ([\#6787](https://github.com/matrix-org/synapse/issues/6787), [\#6790](https://github.com/matrix-org/synapse/issues/6790), [\#6794](https://github.com/matrix-org/synapse/issues/6794))
+
+
+Bugfixes
+--------
+
+- Warn if postgres database has a non-C locale, as that can cause issues when upgrading locales (e.g. due to upgrading OS). ([\#6734](https://github.com/matrix-org/synapse/issues/6734))
+- Minor fixes to `PUT /_synapse/admin/v2/users` admin api. ([\#6761](https://github.com/matrix-org/synapse/issues/6761))
+- Validate `client_secret` parameter using the regex provided by the Client-Server API, temporarily allowing `:` characters for older clients. The `:` character will be removed in a future release. ([\#6767](https://github.com/matrix-org/synapse/issues/6767))
+- Fix persisting redaction events that have been redacted (or otherwise don't have a redacts key). ([\#6771](https://github.com/matrix-org/synapse/issues/6771))
+- Fix outbound federation request metrics. ([\#6795](https://github.com/matrix-org/synapse/issues/6795))
+- Fix bug where querying a remote user's device keys that weren't cached resulted in only returning a single device. ([\#6796](https://github.com/matrix-org/synapse/issues/6796))
+- Fix race in federation sender worker that delayed sending of device updates. ([\#6799](https://github.com/matrix-org/synapse/issues/6799), [\#6800](https://github.com/matrix-org/synapse/issues/6800))
+- Fix bug where Synapse didn't invalidate cache of remote users' devices when Synapse left a room. ([\#6801](https://github.com/matrix-org/synapse/issues/6801))
+- Fix waking up other workers when remote server is detected to have come back online. ([\#6811](https://github.com/matrix-org/synapse/issues/6811))
+
+
+Improved Documentation
+----------------------
+
+- Clarify documentation related to `user_dir` and `federation_reader` workers. ([\#6775](https://github.com/matrix-org/synapse/issues/6775))
+
+
+Internal Changes
+----------------
+
+- Record room versions in the `rooms` table. ([\#6729](https://github.com/matrix-org/synapse/issues/6729), [\#6788](https://github.com/matrix-org/synapse/issues/6788), [\#6810](https://github.com/matrix-org/synapse/issues/6810))
+- Propagate cache invalidates from workers to other workers. ([\#6748](https://github.com/matrix-org/synapse/issues/6748))
+- Remove some unnecessary admin handler abstraction methods. ([\#6751](https://github.com/matrix-org/synapse/issues/6751))
+- Add some debugging for media storage providers. ([\#6757](https://github.com/matrix-org/synapse/issues/6757))
+- Detect unknown remote devices and mark cache as stale. ([\#6776](https://github.com/matrix-org/synapse/issues/6776), [\#6819](https://github.com/matrix-org/synapse/issues/6819))
+- Attempt to resync remote users' devices when detected as stale. ([\#6786](https://github.com/matrix-org/synapse/issues/6786))
+- Delete current state from the database when server leaves a room. ([\#6792](https://github.com/matrix-org/synapse/issues/6792))
+- When a client asks for a remote user's device keys check if the local cache for that user has been marked as potentially stale. ([\#6797](https://github.com/matrix-org/synapse/issues/6797))
+- Add background update to clean out left rooms from current state. ([\#6802](https://github.com/matrix-org/synapse/issues/6802), [\#6816](https://github.com/matrix-org/synapse/issues/6816))
+- Refactoring work in preparation for changing the event redaction algorithm. ([\#6803](https://github.com/matrix-org/synapse/issues/6803), [\#6805](https://github.com/matrix-org/synapse/issues/6805), [\#6806](https://github.com/matrix-org/synapse/issues/6806), [\#6807](https://github.com/matrix-org/synapse/issues/6807), [\#6820](https://github.com/matrix-org/synapse/issues/6820))
+
+
+Synapse 1.9.1 (2020-01-28)
+==========================
+
+Bugfixes
+--------
+
+- Fix bug where setting `mau_limit_reserved_threepids` config would cause Synapse to refuse to start. ([\#6793](https://github.com/matrix-org/synapse/issues/6793))
+
+
+Synapse 1.9.0 (2020-01-23)
+==========================
+
+**WARNING**: As of this release, Synapse no longer supports versions of SQLite before 3.11, and will refuse to start when configured to use an older version. Administrators are recommended to migrate their database to Postgres (see instructions [here](docs/postgres.md)).
+
+If your Synapse deployment uses workers, note that the reverse-proxy configurations for the `synapse.app.media_repository`, `synapse.app.federation_reader` and `synapse.app.event_creator` workers have changed, with the addition of a few paths (see the updated configurations [here](docs/workers.md#available-worker-applications)). Existing configurations will continue to work.
+
+
+Improved Documentation
+----------------------
+
+- Fix endpoint documentation for the List Rooms admin API. ([\#6770](https://github.com/matrix-org/synapse/issues/6770))
+
+
+Synapse 1.9.0rc1 (2020-01-22)
+=============================
+
+Features
+--------
+
+- Allow admin to create or modify a user. Contributed by Awesome Technologies Innovationslabor GmbH. ([\#5742](https://github.com/matrix-org/synapse/issues/5742))
+- Add new quarantine media admin APIs to quarantine by media ID or by user who uploaded the media. ([\#6681](https://github.com/matrix-org/synapse/issues/6681), [\#6756](https://github.com/matrix-org/synapse/issues/6756))
+- Add `org.matrix.e2e_cross_signing` to `unstable_features` in `/versions` as per [MSC1756](https://github.com/matrix-org/matrix-doc/pull/1756). ([\#6712](https://github.com/matrix-org/synapse/issues/6712))
+- Add a new admin API to list and filter rooms on the server. ([\#6720](https://github.com/matrix-org/synapse/issues/6720))
+
+
+Bugfixes
+--------
+
+- Correctly proxy HTTP errors due to API calls to remote group servers. ([\#6654](https://github.com/matrix-org/synapse/issues/6654))
+- Fix media repo admin APIs when using a media worker. ([\#6664](https://github.com/matrix-org/synapse/issues/6664))
+- Fix "CRITICAL" errors being logged when a request is received for a uri containing non-ascii characters. ([\#6682](https://github.com/matrix-org/synapse/issues/6682))
+- Fix a bug where we would assign a numeric user ID if somebody tried registering with an empty username. ([\#6690](https://github.com/matrix-org/synapse/issues/6690))
+- Fix `purge_room` admin API. ([\#6711](https://github.com/matrix-org/synapse/issues/6711))
+- Fix a bug causing Synapse to not always purge quiet rooms with a low `max_lifetime` in their message retention policies when running the automated purge jobs. ([\#6714](https://github.com/matrix-org/synapse/issues/6714))
+- Fix the `synapse_port_db` not correctly running background updates. Thanks @tadzik for reporting. ([\#6718](https://github.com/matrix-org/synapse/issues/6718))
+- Fix changing password via user admin API. ([\#6730](https://github.com/matrix-org/synapse/issues/6730))
+- Fix `/events/:event_id` deprecated API. ([\#6731](https://github.com/matrix-org/synapse/issues/6731))
+- Fix monthly active user limiting support for worker mode, fixes [#4639](https://github.com/matrix-org/synapse/issues/4639). ([\#6742](https://github.com/matrix-org/synapse/issues/6742))
+- Fix bug when setting `account_validity` to an empty block in the config. Thanks to @Sorunome for reporting. ([\#6747](https://github.com/matrix-org/synapse/issues/6747))
+- Fix `AttributeError: 'NoneType' object has no attribute 'get'` in `hash_password` when configuration has an empty `password_config`. Contributed by @ivilata. ([\#6753](https://github.com/matrix-org/synapse/issues/6753))
+- Fix the `docker-compose.yaml` overriding the entire `/etc` folder of the container. Contributed by Fabian Meyer. ([\#6656](https://github.com/matrix-org/synapse/issues/6656))
+
+
+Improved Documentation
+----------------------
+
+- Fix a typo in the configuration example for purge jobs in the sample configuration file. ([\#6621](https://github.com/matrix-org/synapse/issues/6621))
+- Add complete documentation of the message retention policies support. ([\#6624](https://github.com/matrix-org/synapse/issues/6624), [\#6665](https://github.com/matrix-org/synapse/issues/6665))
+- Add some helpful tips about changelog entries to the GitHub pull request template. ([\#6663](https://github.com/matrix-org/synapse/issues/6663))
+- Clarify the `account_validity` and `email` sections of the sample configuration. ([\#6685](https://github.com/matrix-org/synapse/issues/6685))
+- Add more endpoints to the documentation for Synapse workers. ([\#6698](https://github.com/matrix-org/synapse/issues/6698))
+
+
+Deprecations and Removals
+-------------------------
+
+- Synapse no longer supports versions of SQLite before 3.11, and will refuse to start when configured to use an older version. Administrators are recommended to migrate their database to Postgres (see instructions [here](docs/postgres.md)). ([\#6675](https://github.com/matrix-org/synapse/issues/6675))
+
+
+Internal Changes
+----------------
+
+- Add `local_current_membership` table for tracking local user membership state in rooms. ([\#6655](https://github.com/matrix-org/synapse/issues/6655), [\#6728](https://github.com/matrix-org/synapse/issues/6728))
+- Port `synapse.replication.tcp` to async/await. ([\#6666](https://github.com/matrix-org/synapse/issues/6666))
+- Fixup `synapse.replication` to pass mypy checks. ([\#6667](https://github.com/matrix-org/synapse/issues/6667))
+- Allow `additional_resources` to implement `IResource` directly. ([\#6686](https://github.com/matrix-org/synapse/issues/6686))
+- Allow REST endpoint implementations to raise a `RedirectException`, which will redirect the user's browser to a given location. ([\#6687](https://github.com/matrix-org/synapse/issues/6687))
+- Updates and extensions to the module API. ([\#6688](https://github.com/matrix-org/synapse/issues/6688))
+- Updates to the SAML mapping provider API. ([\#6689](https://github.com/matrix-org/synapse/issues/6689), [\#6723](https://github.com/matrix-org/synapse/issues/6723))
+- Remove redundant `RegistrationError` class. ([\#6691](https://github.com/matrix-org/synapse/issues/6691))
+- Don't block processing of incoming EDUs behind processing PDUs in the same transaction. ([\#6697](https://github.com/matrix-org/synapse/issues/6697))
+- Remove duplicate check for the `session` query parameter on the `/auth/xxx/fallback/web` Client-Server endpoint. ([\#6702](https://github.com/matrix-org/synapse/issues/6702))
+- Attempt to retry sending a transaction when we detect a remote server has come back online, rather than waiting for a transaction to be triggered by new data. ([\#6706](https://github.com/matrix-org/synapse/issues/6706))
+- Add `StateMap` type alias to simplify types. ([\#6715](https://github.com/matrix-org/synapse/issues/6715))
+- Add a `DeltaState` to track changes to be made to current state during event persistence. ([\#6716](https://github.com/matrix-org/synapse/issues/6716))
+- Add more logging around message retention policies support. ([\#6717](https://github.com/matrix-org/synapse/issues/6717))
+- When processing a SAML response, log the assertions for easier configuration. ([\#6724](https://github.com/matrix-org/synapse/issues/6724))
+- Fixup `synapse.rest` to pass mypy. ([\#6732](https://github.com/matrix-org/synapse/issues/6732), [\#6764](https://github.com/matrix-org/synapse/issues/6764))
+- Fixup `synapse.api` to pass mypy. ([\#6733](https://github.com/matrix-org/synapse/issues/6733))
+- Allow streaming cache 'invalidate all' to workers. ([\#6749](https://github.com/matrix-org/synapse/issues/6749))
+- Remove unused CI docker compose files. ([\#6754](https://github.com/matrix-org/synapse/issues/6754))
+
+
 Synapse 1.8.0 (2020-01-09)
 ==========================
 
+**WARNING**: As of this release Synapse will refuse to start if the `log_file` config option is specified. Support for the option was removed in v1.3.0.
+
+
 Bugfixes
 --------
 
@@ -16,7 +978,7 @@ Features
 
 - Add v2 APIs for the `send_join` and `send_leave` federation endpoints (as described in [MSC1802](https://github.com/matrix-org/matrix-doc/pull/1802)). ([\#6349](https://github.com/matrix-org/synapse/issues/6349))
 - Add a develop script to generate full SQL schemas. ([\#6394](https://github.com/matrix-org/synapse/issues/6394))
-- Add custom SAML username mapping functinality through an external provider plugin. ([\#6411](https://github.com/matrix-org/synapse/issues/6411))
+- Add custom SAML username mapping functionality through an external provider plugin. ([\#6411](https://github.com/matrix-org/synapse/issues/6411))
 - Automatically delete empty groups/communities. ([\#6453](https://github.com/matrix-org/synapse/issues/6453))
 - Add option `limit_profile_requests_to_users_who_share_rooms` to prevent requirement of a local user sharing a room with another user to query their profile information. ([\#6523](https://github.com/matrix-org/synapse/issues/6523))
 - Add an `export_signing_key` script to extract the public part of signing keys when rotating them. ([\#6546](https://github.com/matrix-org/synapse/issues/6546))

CONTRIBUTING.md

@@ -1,75 +1,63 @@
-# Contributing code to Matrix
+# Contributing code to Synapse
 
-Everyone is welcome to contribute code to Matrix
-(https://github.com/matrix-org), provided that they are willing to license
-their contributions under the same license as the project itself. We follow a
-simple 'inbound=outbound' model for contributions: the act of submitting an
-'inbound' contribution means that the contributor agrees to license the code
-under the same terms as the project's overall 'outbound' license - in our
-case, this is almost always Apache Software License v2 (see [LICENSE](LICENSE)).
+Everyone is welcome to contribute code to [matrix.org
+projects](https://github.com/matrix-org), provided that they are willing to
+license their contributions under the same license as the project itself. We
+follow a simple 'inbound=outbound' model for contributions: the act of
+submitting an 'inbound' contribution means that the contributor agrees to
+license the code under the same terms as the project's overall 'outbound'
+license - in our case, this is almost always Apache Software License v2 (see
+[LICENSE](LICENSE)).
 
 ## How to contribute
 
-The preferred and easiest way to contribute changes to Matrix is to fork the
-relevant project on github, and then [create a pull request](
-https://help.github.com/articles/using-pull-requests/) to ask us to pull
-your changes into our repo.
+The preferred and easiest way to contribute changes is to fork the relevant
+project on github, and then [create a pull request](
+https://help.github.com/articles/using-pull-requests/) to ask us to pull your
+changes into our repo.
 
-**The single biggest thing you need to know is: please base your changes on
-the develop branch - *not* master.**
+Some other points to follow:
+ 
+ * Please base your changes on the `develop` branch.
+  
+ * Please follow the [code style requirements](#code-style).
 
-We use the master branch to track the most recent release, so that folks who
-blindly clone the repo and automatically check out master get something that
-works. Develop is the unstable branch where all the development actually
-happens: the workflow is that contributors should fork the develop branch to
-make a 'feature' branch for a particular contribution, and then make a pull
-request to merge this back into the matrix.org 'official' develop branch. We
-use github's pull request workflow to review the contribution, and either ask
-you to make any refinements needed or merge it and make them ourselves. The
-changes will then land on master when we next do a release.
+ * Please include a [changelog entry](#changelog) with each PR.
 
-We use [Buildkite](https://buildkite.com/matrix-dot-org/synapse) for continuous
-integration. If your change breaks the build, this will be shown in GitHub, so
-please keep an eye on the pull request for feedback.
+ * Please [sign off](#sign-off) your contribution.
 
-To run unit tests in a local development environment, you can use:
+ * Please keep an eye on the pull request for feedback from the [continuous
+   integration system](#continuous-integration-and-testing) and try to fix any
+   errors that come up.
 
-- ``tox -e py35`` (requires tox to be installed by ``pip install tox``)
-  for SQLite-backed Synapse on Python 3.5.
-- ``tox -e py36`` for SQLite-backed Synapse on Python 3.6.
-- ``tox -e py36-postgres`` for PostgreSQL-backed Synapse on Python 3.6
-  (requires a running local PostgreSQL with access to create databases).
-- ``./test_postgresql.sh`` for PostgreSQL-backed Synapse on Python 3.5
-  (requires Docker). Entirely self-contained, recommended if you don't want to
-  set up PostgreSQL yourself.
-
-Docker images are available for running the integration tests (SyTest) locally,
-see the [documentation in the SyTest repo](
-https://github.com/matrix-org/sytest/blob/develop/docker/README.md) for more
-information.
+ * If you need to [update your PR](#updating-your-pull-request), just add new
+   commits to your branch rather than rebasing.
 
 ## Code style
 
-All Matrix projects have a well-defined code-style - and sometimes we've even
-got as far as documenting it... For instance, synapse's code style doc lives
-[here](docs/code_style.md).
+Synapse's code style is documented [here](docs/code_style.md). Please follow
+it, including the conventions for the [sample configuration
+file](docs/code_style.md#configuration-file-format).
 
-To facilitate meeting these criteria you can run `scripts-dev/lint.sh`
-locally. Since this runs the tools listed in the above document, you'll need
-python 3.6 and to install each tool:
+Many of the conventions are enforced by scripts which are run as part of the
+[continuous integration system](#continuous-integration-and-testing). To help
+check if you have followed the code style, you can run `scripts-dev/lint.sh`
+locally. You'll need python 3.6 or later, and to install a number of tools:
 
 ```
 # Install the dependencies
-pip install -U black flake8 isort
+pip install -U black flake8 flake8-comprehensions isort
 
 # Run the linter script
 ./scripts-dev/lint.sh
 ```
 
 **Note that the script does not just test/check, but also reformats code, so you
-may wish to ensure any new code is committed first**. By default this script
-checks all files and can take some time; if you alter only certain files, you
-might wish to specify paths as arguments to reduce the run-time:
+may wish to ensure any new code is committed first**.
+
+By default, this script checks all files and can take some time; if you alter
+only certain files, you might wish to specify paths as arguments to reduce the
+run-time:
 
 ```
 ./scripts-dev/lint.sh path/to/file1.py path/to/file2.py path/to/folder
@@ -82,7 +70,6 @@ Please ensure your changes match the cosmetic style of the existing project,
 and **never** mix cosmetic and functional changes in the same commit, as it
 makes it horribly hard to review otherwise.
 
-
 ## Changelog
 
 All changes, even minor ones, need a corresponding changelog / newsfragment
@@ -98,24 +85,55 @@ in the format of `PRnumber.type`. The type can be one of the following:
 * `removal` (also used for deprecations)
 * `misc` (for internal-only changes)
 
-The content of the file is your changelog entry, which should be a short
-description of your change in the same style as the rest of our [changelog](
-https://github.com/matrix-org/synapse/blob/master/CHANGES.md). The file can
-contain Markdown formatting, and should end with a full stop ('.') for
+This file will become part of our [changelog](
+https://github.com/matrix-org/synapse/blob/master/CHANGES.md) at the next
+release, so the content of the file should be a short description of your
+change in the same style as the rest of the changelog. The file can contain Markdown
+formatting, and should end with a full stop (.) or an exclamation mark (!) for
 consistency.
 
 Adding credits to the changelog is encouraged, we value your
 contributions and would like to have you shouted out in the release notes!
 
 For example, a fix in PR #1234 would have its changelog entry in
-`changelog.d/1234.bugfix`, and contain content like "The security levels of
-Florbs are now validated when received over federation. Contributed by Jane
-Matrix.".
+`changelog.d/1234.bugfix`, and contain content like:
 
-## Debian changelog
+> The security levels of Florbs are now validated when received
+> via the `/federation/florb` endpoint. Contributed by Jane Matrix.
+
+If there are multiple pull requests involved in a single bugfix/feature/etc,
+then the content for each `changelog.d` file should be the same. Towncrier will
+merge the matching files together into a single changelog entry when we come to
+release.
+
+### How do I know what to call the changelog file before I create the PR?
+
+Obviously, you don't know if you should call your newsfile
+`1234.bugfix` or `5678.bugfix` until you create the PR, which leads to a
+chicken-and-egg problem.
+
+There are two options for solving this:
+
+ 1. Open the PR without a changelog file, see what number you got, and *then*
+    add the changelog file to your branch (see [Updating your pull
+    request](#updating-your-pull-request)), or:
+
+ 1. Look at the [list of all
+    issues/PRs](https://github.com/matrix-org/synapse/issues?q=), add one to the
+    highest number you see, and quickly open the PR before somebody else claims
+    your number.
+
+    [This
+    script](https://github.com/richvdh/scripts/blob/master/next_github_number.sh)
+    might be helpful if you find yourself doing this a lot.
+
+Sorry, we know it's a bit fiddly, but it's *really* helpful for us when we come
+to put together a release!
+
+### Debian changelog
 
 Changes which affect the debian packaging files (in `debian`) are an
-exception.
+exception to the rule that all changes require a `changelog.d` file.
 
 In this case, you will need to add an entry to the debian changelog for the
 next release. For this, run the following command:
@@ -200,6 +218,46 @@ Git allows you to add this signoff automatically when using the `-s`
 flag to `git commit`, which uses the name and email set in your
 `user.name` and `user.email` git configs.
 
+## Continuous integration and testing
+
+[Buildkite](https://buildkite.com/matrix-dot-org/synapse) will automatically
+run a series of checks and tests against any PR which is opened against the
+project; if your change breaks the build, this will be shown in GitHub, with
+links to the build results. If your build fails, please try to fix the errors
+and update your branch.
+
+To run unit tests in a local development environment, you can use:
+
+- ``tox -e py35`` (requires tox to be installed by ``pip install tox``)
+  for SQLite-backed Synapse on Python 3.5.
+- ``tox -e py36`` for SQLite-backed Synapse on Python 3.6.
+- ``tox -e py36-postgres`` for PostgreSQL-backed Synapse on Python 3.6
+  (requires a running local PostgreSQL with access to create databases).
+- ``./test_postgresql.sh`` for PostgreSQL-backed Synapse on Python 3.5
+  (requires Docker). Entirely self-contained, recommended if you don't want to
+  set up PostgreSQL yourself.
+
+Docker images are available for running the integration tests (SyTest) locally,
+see the [documentation in the SyTest repo](
+https://github.com/matrix-org/sytest/blob/develop/docker/README.md) for more
+information.
+
+## Updating your pull request
+
+If you decide to make changes to your pull request - perhaps to address issues
+raised in a review, or to fix problems highlighted by [continuous
+integration](#continuous-integration-and-testing) - just add new commits to your
+branch, and push to GitHub. The pull request will automatically be updated.
+
+Please **avoid** rebasing your branch, especially once the PR has been
+reviewed: doing so makes it very difficult for a reviewer to see what has
+changed since a previous review.
+
+## Notes for maintainers on merging PRs etc
+
+There are some notes for those with commit access to the project on how we
+manage git [here](docs/dev/git.md).
+
 ## Conclusion
 
 That's it! Matrix is a very open and collaborative project as you might expect

INSTALL.md

@@ -2,7 +2,6 @@
 - [Installing Synapse](#installing-synapse)
   - [Installing from source](#installing-from-source)
     - [Platform-Specific Instructions](#platform-specific-instructions)
-    - [Troubleshooting Installation](#troubleshooting-installation)
   - [Prebuilt packages](#prebuilt-packages)
 - [Setting up Synapse](#setting-up-synapse)
   - [TLS certificates](#tls-certificates)
@@ -10,6 +9,7 @@
   - [Registering a user](#registering-a-user)
   - [Setting up a TURN server](#setting-up-a-turn-server)
   - [URL previews](#url-previews)
+- [Troubleshooting Installation](#troubleshooting-installation)
 
 # Choosing your server name
 
@@ -36,7 +36,7 @@ that your email address is probably `user@example.com` rather than
 System requirements:
 
 - POSIX-compliant system (tested on Linux & OS X)
-- Python 3.5, 3.6, 3.7 or 3.8.
+- Python 3.5.2 or later, up to Python 3.8.
 - At least 1GB of free RAM if you want to join large public rooms like #matrix:matrix.org
 
 Synapse is written in Python but some of the libraries it uses are written in
@@ -70,7 +70,7 @@ pip install -U matrix-synapse
 ```
 
 Before you can start Synapse, you will need to generate a configuration
-file. To do this, run (in your virtualenv, as before)::
+file. To do this, run (in your virtualenv, as before):
 
 ```
 cd ~/synapse
@@ -84,22 +84,24 @@ python -m synapse.app.homeserver \
 ... substituting an appropriate value for `--server-name`.
 
 This command will generate you a config file that you can then customise, but it will
-also generate a set of keys for you. These keys will allow your Home Server to
-identify itself to other Home Servers, so don't lose or delete them. It would be
+also generate a set of keys for you. These keys will allow your homeserver to
+identify itself to other homeserver, so don't lose or delete them. It would be
 wise to back them up somewhere safe. (If, for whatever reason, you do need to
-change your Home Server's keys, you may find that other Home Servers have the
+change your homeserver's keys, you may find that other homeserver have the
 old key cached. If you update the signing key, you should change the name of the
 key in the `<server name>.signing.key` file (the second word) to something
 different. See the
 [spec](https://matrix.org/docs/spec/server_server/latest.html#retrieving-server-keys)
-for more information on key management.)
+for more information on key management).
 
 To actually run your new homeserver, pick a working directory for Synapse to
-run (e.g. `~/synapse`), and::
+run (e.g. `~/synapse`), and:
 
-    cd ~/synapse
-    source env/bin/activate
-    synctl start
+```
+cd ~/synapse
+source env/bin/activate
+synctl start
+```
 
 ### Platform-Specific Instructions
 
@@ -110,7 +112,7 @@ Installing prerequisites on Ubuntu or Debian:
 ```
 sudo apt-get install build-essential python3-dev libffi-dev \
                      python3-pip python3-setuptools sqlite3 \
-                     libssl-dev python3-virtualenv libjpeg-dev libxslt1-dev
+                     libssl-dev virtualenv libjpeg-dev libxslt1-dev
 ```
 
 #### ArchLinux
@@ -124,15 +126,29 @@ sudo pacman -S base-devel python python-pip \
 
 #### CentOS/Fedora
 
-Installing prerequisites on CentOS 7 or Fedora 25:
+Installing prerequisites on CentOS 8 or Fedora>26:
+
+```
+sudo dnf install libtiff-devel libjpeg-devel libzip-devel freetype-devel \
+                 libwebp-devel tk-devel redhat-rpm-config \
+                 python3-virtualenv libffi-devel openssl-devel
+sudo dnf groupinstall "Development Tools"
+```
+
+Installing prerequisites on CentOS 7 or Fedora<=25:
 
 ```
 sudo yum install libtiff-devel libjpeg-devel libzip-devel freetype-devel \
                  lcms2-devel libwebp-devel tcl-devel tk-devel redhat-rpm-config \
-                 python-virtualenv libffi-devel openssl-devel
+                 python3-virtualenv libffi-devel openssl-devel
 sudo yum groupinstall "Development Tools"
 ```
 
+Note that Synapse does not support versions of SQLite before 3.11, and CentOS 7
+uses SQLite 3.7. You may be able to work around this by installing a more
+recent SQLite version, but it is recommended that you instead use a Postgres
+database: see [docs/postgres.md](docs/postgres.md).
+
 #### macOS
 
 Installing prerequisites on macOS:
@@ -164,35 +180,41 @@ sudo zypper in python-pip python-setuptools sqlite3 python-virtualenv \
 
 #### OpenBSD
 
-Installing prerequisites on OpenBSD:
+A port of Synapse is available under `net/synapse`. The filesystem
+underlying the homeserver directory (defaults to `/var/synapse`) has to be
+mounted with `wxallowed` (cf. `mount(8)`), so creating a separate filesystem
+and mounting it to `/var/synapse` should be taken into consideration.
+
+To be able to build Synapse's dependency on python the `WRKOBJDIR`
+(cf. `bsd.port.mk(5)`) for building python, too, needs to be on a filesystem
+mounted with `wxallowed` (cf. `mount(8)`).
+
+Creating a `WRKOBJDIR` for building python under `/usr/local` (which on a
+default OpenBSD installation is mounted with `wxallowed`):
 
 ```
-doas pkg_add python libffi py-pip py-setuptools sqlite3 py-virtualenv \
-              libxslt jpeg
+doas mkdir /usr/local/pobj_wxallowed
 ```
 
-There is currently no port for OpenBSD. Additionally, OpenBSD's security
-settings require a slightly more difficult installation process.
+Assuming `PORTS_PRIVSEP=Yes` (cf. `bsd.port.mk(5)`) and `SUDO=doas` are
+configured in `/etc/mk.conf`:
 
-XXX: I suspect this is out of date.
+```
+doas chown _pbuild:_pbuild /usr/local/pobj_wxallowed
+```
 
-1. Create a new directory in `/usr/local` called `_synapse`. Also, create a
-   new user called `_synapse` and set that directory as the new user's home.
-   This is required because, by default, OpenBSD only allows binaries which need
-   write and execute permissions on the same memory space to be run from
-   `/usr/local`.
-2. `su` to the new `_synapse` user and change to their home directory.
-3. Create a new virtualenv: `virtualenv -p python2.7 ~/.synapse`
-4. Source the virtualenv configuration located at
-   `/usr/local/_synapse/.synapse/bin/activate`. This is done in `ksh` by
-   using the `.` command, rather than `bash`'s `source`.
-5. Optionally, use `pip` to install `lxml`, which Synapse needs to parse
-   webpages for their titles.
-6. Use `pip` to install this repository: `pip install matrix-synapse`
-7. Optionally, change `_synapse`'s shell to `/bin/false` to reduce the
-   chance of a compromised Synapse server being used to take over your box.
+Setting the `WRKOBJDIR` for building python:
 
-After this, you may proceed with the rest of the install directions.
+```
+echo WRKOBJDIR_lang/python/3.7=/usr/local/pobj_wxallowed  \\nWRKOBJDIR_lang/python/2.7=/usr/local/pobj_wxallowed >> /etc/mk.conf
+```
+
+Building Synapse:
+
+```
+cd /usr/ports/net/synapse
+make install
+```
 
 #### Windows
 
@@ -203,45 +225,6 @@ be found at https://docs.microsoft.com/en-us/windows/wsl/install-win10 for
 Windows 10 and https://docs.microsoft.com/en-us/windows/wsl/install-on-server
 for Windows Server.
 
-### Troubleshooting Installation
-
-XXX a bunch of this is no longer relevant.
-
-Synapse requires pip 8 or later, so if your OS provides too old a version you
-may need to manually upgrade it::
-
-    sudo pip install --upgrade pip
-
-Installing may fail with `Could not find any downloads that satisfy the requirement pymacaroons-pynacl (from matrix-synapse==0.12.0)`.
-You can fix this by manually upgrading pip and virtualenv::
-
-    sudo pip install --upgrade virtualenv
-
-You can next rerun `virtualenv -p python3 synapse` to update the virtual env.
-
-Installing may fail during installing virtualenv with `InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning.`
-You can fix this  by manually installing ndg-httpsclient::
-
-    pip install --upgrade ndg-httpsclient
-
-Installing may fail with `mock requires setuptools>=17.1. Aborting installation`.
-You can fix this by upgrading setuptools::
-
-    pip install --upgrade setuptools
-
-If pip crashes mid-installation for reason (e.g. lost terminal), pip may
-refuse to run until you remove the temporary installation directory it
-created. To reset the installation::
-
-    rm -rf /tmp/pip_install_matrix
-
-pip seems to leak *lots* of memory during installation.  For instance, a Linux
-host with 512MB of RAM may run out of memory whilst installing Twisted.  If this
-happens, you will have to individually install the dependencies which are
-failing, e.g.::
-
-    pip install twisted
-
 ## Prebuilt packages
 
 As an alternative to installing from source, prebuilt packages are available
@@ -300,7 +283,7 @@ For `buster` and `sid`, Synapse is available in the Debian repositories and
 it should be possible to install it with simply:
 
 ```
-    sudo apt install matrix-synapse
+sudo apt install matrix-synapse
 ```
 
 There is also a version of `matrix-synapse` in `stretch-backports`. Please see
@@ -361,16 +344,30 @@ sudo pip install py-bcrypt
 
 Synapse can be found in the void repositories as 'synapse':
 
-    xbps-install -Su
-    xbps-install -S synapse
+```
+xbps-install -Su
+xbps-install -S synapse
+```
 
 ### FreeBSD
 
 Synapse can be installed via FreeBSD Ports or Packages contributed by Brendan Molloy from:
 
  - Ports: `cd /usr/ports/net-im/py-matrix-synapse && make install clean`
- - Packages: `pkg install py27-matrix-synapse`
+ - Packages: `pkg install py37-matrix-synapse`
 
+### OpenBSD
+
+As of OpenBSD 6.7 Synapse is available as a pre-compiled binary. The filesystem
+underlying the homeserver directory (defaults to `/var/synapse`) has to be
+mounted with `wxallowed` (cf. `mount(8)`), so creating a separate filesystem
+and mounting it to `/var/synapse` should be taken into consideration.
+
+Installing Synapse:
+
+```
+doas pkg_add synapse
+```
 
 ### NixOS
 
@@ -383,15 +380,17 @@ Once you have installed synapse as above, you will need to configure it.
 
 ## TLS certificates
 
-The default configuration exposes a single HTTP port: http://localhost:8008. It
-is suitable for local testing, but for any practical use, you will either need
-to enable a reverse proxy, or configure Synapse to expose an HTTPS port.
+The default configuration exposes a single HTTP port on the local
+interface: `http://localhost:8008`. It is suitable for local testing,
+but for any practical use, you will need Synapse's APIs to be served
+over HTTPS.
 
-For information on using a reverse proxy, see
+The recommended way to do so is to set up a reverse proxy on port
+`8448`. You can find documentation on doing so in
 [docs/reverse_proxy.md](docs/reverse_proxy.md).
 
-To configure Synapse to expose an HTTPS port, you will need to edit
-`homeserver.yaml`, as follows:
+Alternatively, you can configure Synapse to expose an HTTPS port. To do
+so, you will need to edit `homeserver.yaml`, as follows:
 
 * First, under the `listeners` section, uncomment the configuration for the
   TLS-enabled listener. (Remove the hash sign (`#`) at the start of
@@ -404,19 +403,23 @@ To configure Synapse to expose an HTTPS port, you will need to edit
       resources:
         - names: [client, federation]
   ```
+
 * You will also need to uncomment the `tls_certificate_path` and
   `tls_private_key_path` lines under the `TLS` section. You can either
   point these settings at an existing certificate and key, or you can
   enable Synapse's built-in ACME (Let's Encrypt) support. Instructions
   for having Synapse automatically provision and renew federation
-  certificates through ACME can be found at [ACME.md](docs/ACME.md). If you
-  are using your own certificate, be sure to use a `.pem` file that includes
-  the full certificate chain including any intermediate certificates (for
-  instance, if using certbot, use `fullchain.pem` as your certificate, not
+  certificates through ACME can be found at [ACME.md](docs/ACME.md).
+  Note that, as pointed out in that document, this feature will not
+  work with installs set up after November 2019.
+
+  If you are using your own certificate, be sure to use a `.pem` file that
+  includes the full certificate chain including any intermediate certificates
+  (for instance, if using certbot, use `fullchain.pem` as your certificate, not
   `cert.pem`).
 
 For a more detailed guide to configuring your server for federation, see
-[federate.md](docs/federate.md)
+[federate.md](docs/federate.md).
 
 
 ## Email
@@ -463,7 +466,7 @@ on your server even if `enable_registration` is `false`.
 ## Setting up a TURN server
 
 For reliable VoIP calls to be routed via this homeserver, you MUST configure
-a TURN server.  See [docs/turn-howto.md](docs/turn-howto.md) for details.
+a TURN server. See [docs/turn-howto.md](docs/turn-howto.md) for details.
 
 ## URL previews
 
@@ -472,10 +475,24 @@ turn it on you must enable the `url_preview_enabled: True` config parameter
 and explicitly specify the IP ranges that Synapse is not allowed to spider for
 previewing in the `url_preview_ip_range_blacklist` configuration parameter.
 This is critical from a security perspective to stop arbitrary Matrix users
-spidering 'internal' URLs on your network.  At the very least we recommend that
+spidering 'internal' URLs on your network. At the very least we recommend that
 your loopback and RFC1918 IP addresses are blacklisted.
 
-This also requires the optional lxml and netaddr python dependencies to be
-installed.  This in turn requires the libxml2 library to be available - on
+This also requires the optional `lxml` and `netaddr` python dependencies to be
+installed. This in turn requires the `libxml2` library to be available - on
 Debian/Ubuntu this means `apt-get install libxml2-dev`, or equivalent for
 your OS.
+
+# Troubleshooting Installation
+
+`pip` seems to leak *lots* of memory during installation. For instance, a Linux
+host with 512MB of RAM may run out of memory whilst installing Twisted. If this
+happens, you will have to individually install the dependencies which are
+failing, e.g.:
+
+```
+pip install twisted
+```
+
+If you have any other problems, feel free to ask in
+[#synapse:matrix.org](https://matrix.to/#/#synapse:matrix.org).

MANIFEST.in

@@ -30,23 +30,24 @@ recursive-include synapse/static *.gif
 recursive-include synapse/static *.html
 recursive-include synapse/static *.js
 
-exclude Dockerfile
+exclude .codecov.yml
+exclude .coveragerc
 exclude .dockerignore
-exclude test_postgresql.sh
 exclude .editorconfig
+exclude Dockerfile
+exclude mypy.ini
 exclude sytest-blacklist
+exclude test_postgresql.sh
 
 include pyproject.toml
 recursive-include changelog.d *
 
 prune .buildkite
 prune .circleci
-prune .codecov.yml
-prune .coveragerc
 prune .github
+prune contrib
 prune debian
 prune demo/etc
 prune docker
-prune mypy.ini
 prune snap
 prune stubs

README.rst

@@ -1,3 +1,11 @@
+================
+Synapse |shield|
+================
+
+.. |shield| image:: https://img.shields.io/matrix/synapse:matrix.org?label=support&logo=matrix
+  :alt: (get support on #synapse:matrix.org)
+  :target: https://matrix.to/#/#synapse:matrix.org
+
 .. contents::
 
 Introduction
@@ -77,6 +85,17 @@ Thanks for using Matrix!
 [1] End-to-end encryption is currently in beta: `blog post <https://matrix.org/blog/2016/11/21/matrixs-olm-end-to-end-encryption-security-assessment-released-and-implemented-cross-platform-on-riot-at-last>`_.
 
 
+Support
+=======
+
+For support installing or managing Synapse, please join |room|_ (from a matrix.org
+account if necessary) and ask questions there. We do not use GitHub issues for
+support requests, only for bug reports and feature requests.
+
+.. |room| replace:: ``#synapse:matrix.org``
+.. _room: https://matrix.to/#/#synapse:matrix.org
+
+
 Synapse Installation
 ====================
 
@@ -176,7 +195,7 @@ By default Synapse uses SQLite in and doing so trades performance for convenienc
 SQLite is only recommended in Synapse for testing purposes or for servers with
 light workloads.
 
-Almost all installations should opt to use PostreSQL. Advantages include:
+Almost all installations should opt to use PostgreSQL. Advantages include:
 
 * significant performance improvements due to the superior threading and
   caching model, smarter query optimiser
@@ -248,7 +267,7 @@ First calculate the hash of the new password::
     Confirm password:
     $2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
 
-Then update the `users` table in the database::
+Then update the ``users`` table in the database::
 
     UPDATE users SET password_hash='$2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'
         WHERE name='@test:test.com';
@@ -272,7 +291,7 @@ to install using pip and a virtualenv::
 
     virtualenv -p python3 env
     source env/bin/activate
-    python -m pip install --no-use-pep517 -e .[all]
+    python -m pip install --no-use-pep517 -e ".[all]"
 
 This will run a process of downloading and installing all the needed
 dependencies into a virtual env.
@@ -316,6 +335,9 @@ Building internal API documentation::
 Troubleshooting
 ===============
 
+Need help? Join our community support room on Matrix:
+`#synapse:matrix.org <https://matrix.to/#/#synapse:matrix.org>`_
+
 Running out of File Handles
 ---------------------------
 

UPGRADE.rst

@@ -75,6 +75,163 @@ for example:
      wget https://packages.matrix.org/debian/pool/main/m/matrix-synapse-py3/matrix-synapse-py3_1.3.0+stretch1_amd64.deb
      dpkg -i matrix-synapse-py3_1.3.0+stretch1_amd64.deb
 
+Upgrading to v1.14.0
+====================
+
+This version includes a database update which is run as part of the upgrade,
+and which may take a couple of minutes in the case of a large server. Synapse
+will not respond to HTTP requests while this update is taking place.
+
+Upgrading to v1.13.0
+====================
+
+Incorrect database migration in old synapse versions
+----------------------------------------------------
+
+A bug was introduced in Synapse 1.4.0 which could cause the room directory to
+be incomplete or empty if Synapse was upgraded directly from v1.2.1 or
+earlier, to versions between v1.4.0 and v1.12.x.
+
+This will *not* be a problem for Synapse installations which were:
+ * created at v1.4.0 or later,
+ * upgraded via v1.3.x, or
+ * upgraded straight from v1.2.1 or earlier to v1.13.0 or later.
+
+If completeness of the room directory is a concern, installations which are
+affected can be repaired as follows:
+
+1. Run the following sql from a `psql` or `sqlite3` console:
+
+   .. code:: sql
+
+     INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES
+        ('populate_stats_process_rooms', '{}', 'current_state_events_membership');
+
+     INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES
+        ('populate_stats_process_users', '{}', 'populate_stats_process_rooms');
+
+2. Restart synapse.
+
+New Single Sign-on HTML Templates
+---------------------------------
+
+New templates (``sso_auth_confirm.html``, ``sso_auth_success.html``, and
+``sso_account_deactivated.html``) were added to Synapse. If your Synapse is
+configured to use SSO and a custom  ``sso_redirect_confirm_template_dir``
+configuration then these templates will need to be copied from
+`synapse/res/templates <synapse/res/templates>`_ into that directory.
+
+Synapse SSO Plugins Method Deprecation
+--------------------------------------
+
+Plugins using the ``complete_sso_login`` method of
+``synapse.module_api.ModuleApi`` should update to using the async/await
+version ``complete_sso_login_async`` which includes additional checks. The
+non-async version is considered deprecated.
+
+Rolling back to v1.12.4 after a failed upgrade
+----------------------------------------------
+
+v1.13.0 includes a lot of large changes. If something problematic occurs, you
+may want to roll-back to a previous version of Synapse. Because v1.13.0 also
+includes a new database schema version, reverting that version is also required
+alongside the generic rollback instructions mentioned above. In short, to roll
+back to v1.12.4 you need to:
+
+1. Stop the server
+2. Decrease the schema version in the database:
+
+   .. code:: sql
+
+      UPDATE schema_version SET version = 57;
+
+3. Downgrade Synapse by following the instructions for your installation method
+   in the "Rolling back to older versions" section above.
+
+
+Upgrading to v1.12.0
+====================
+
+This version includes a database update which is run as part of the upgrade,
+and which may take some time (several hours in the case of a large
+server). Synapse will not respond to HTTP requests while this update is taking
+place.
+
+This is only likely to be a problem in the case of a server which is
+participating in many rooms.
+
+0. As with all upgrades, it is recommended that you have a recent backup of
+   your database which can be used for recovery in the event of any problems.
+
+1. As an initial check to see if you will be affected, you can try running the
+   following query from the `psql` or `sqlite3` console. It is safe to run it
+   while Synapse is still running.
+
+   .. code:: sql
+
+      SELECT MAX(q.v) FROM (
+        SELECT (
+          SELECT ej.json AS v
+          FROM state_events se INNER JOIN event_json ej USING (event_id)
+          WHERE se.room_id=rooms.room_id AND se.type='m.room.create' AND se.state_key=''
+          LIMIT 1
+        ) FROM rooms WHERE rooms.room_version IS NULL
+      ) q;
+
+   This query will take about the same amount of time as the upgrade process: ie,
+   if it takes 5 minutes, then it is likely that Synapse will be unresponsive for
+   5 minutes during the upgrade.
+
+   If you consider an outage of this duration to be acceptable, no further
+   action is necessary and you can simply start Synapse 1.12.0.
+
+   If you would prefer to reduce the downtime, continue with the steps below.
+
+2. The easiest workaround for this issue is to manually
+   create a new index before upgrading. On PostgreSQL, his can be done as follows:
+
+   .. code:: sql
+
+      CREATE INDEX CONCURRENTLY tmp_upgrade_1_12_0_index
+      ON state_events(room_id) WHERE type = 'm.room.create';
+
+   The above query may take some time, but is also safe to run while Synapse is
+   running.
+
+   We assume that no SQLite users have databases large enough to be
+   affected. If you *are* affected, you can run a similar query, omitting the
+   ``CONCURRENTLY`` keyword. Note however that this operation may in itself cause
+   Synapse to stop running for some time. Synapse admins are reminded that
+   `SQLite is not recommended for use outside a test
+   environment <https://github.com/matrix-org/synapse/blob/master/README.rst#using-postgresql>`_.
+
+3. Once the index has been created, the ``SELECT`` query in step 1 above should
+   complete quickly. It is therefore safe to upgrade to Synapse 1.12.0.
+
+4. Once Synapse 1.12.0 has successfully started and is responding to HTTP
+   requests, the temporary index can be removed:
+
+   .. code:: sql
+
+      DROP INDEX tmp_upgrade_1_12_0_index;
+
+Upgrading to v1.10.0
+====================
+
+Synapse will now log a warning on start up if used with a PostgreSQL database
+that has a non-recommended locale set.
+
+See `docs/postgres.md <docs/postgres.md>`_ for details.
+
+
+Upgrading to v1.8.0
+===================
+
+Specifying a ``log_file`` config option will now cause Synapse to refuse to
+start, and should be replaced by with the ``log_config`` option. Support for
+the ``log_file`` option was removed in v1.3.0 and has since had no effect.
+
+
 Upgrading to v1.7.0
 ===================
 

contrib/docker/docker-compose.yml

@@ -15,10 +15,9 @@ services:
     restart: unless-stopped
     # See the readme for a full documentation of the environment settings
     environment:
-      - SYNAPSE_CONFIG_PATH=/etc/homeserver.yaml
+      - SYNAPSE_CONFIG_PATH=/data/homeserver.yaml
     volumes:
       # You may either store all the files in a local folder
-      - ./matrix-config:/etc
       - ./files:/data
       # .. or you may split this between different storage points
       # - ./files:/data
@@ -56,6 +55,9 @@ services:
     environment:
       - POSTGRES_USER=synapse
       - POSTGRES_PASSWORD=changeme
+      # ensure the database gets created correctly
+      # https://github.com/matrix-org/synapse/blob/master/docs/postgres.md#set-up-database
+      - POSTGRES_INITDB_ARGS=--encoding=UTF-8 --lc-collate=C --lc-ctype=C
     volumes:
       # You may store the database tables in a local folder..
       - ./schemas:/var/lib/postgresql/data

contrib/grafana/README.md

@@ -1,6 +1,6 @@
 # Using the Synapse Grafana dashboard
 
 0. Set up Prometheus and Grafana. Out of scope for this readme. Useful documentation about using Grafana with Prometheus: http://docs.grafana.org/features/datasources/prometheus/
-1. Have your Prometheus scrape your Synapse. https://github.com/matrix-org/synapse/blob/master/docs/metrics-howto.rst
+1. Have your Prometheus scrape your Synapse. https://github.com/matrix-org/synapse/blob/master/docs/metrics-howto.md
 2. Import dashboard into Grafana. Download `synapse.json`. Import it to Grafana and select the correct Prometheus datasource. http://docs.grafana.org/reference/export_import/
 3. Set up additional recording rules

contrib/graph/graph3.py

@@ -24,8 +24,6 @@ import argparse
 from synapse.events import FrozenEvent
 from synapse.util.frozenutils import unfreeze
 
-from six import string_types
-
 
 def make_graph(file_name, room_id, file_prefix, limit):
     print("Reading lines")
@@ -62,7 +60,7 @@ def make_graph(file_name, room_id, file_prefix, limit):
         for key, value in unfreeze(event.get_dict()["content"]).items():
             if value is None:
                 value = "<null>"
-            elif isinstance(value, string_types):
+            elif isinstance(value, str):
                 pass
             else:
                 value = json.dumps(value)

contrib/systemd-with-workers/README.md

@@ -1,150 +1,2 @@
-# Setup Synapse with Workers and Systemd
-
-This is a setup for managing synapse with systemd including support for
-managing workers. It provides a `matrix-synapse`, as well as a
-`matrix-synapse-worker@` service for any workers you require. Additionally to
-group the required services it sets up a `matrix.target`. You can use this to
-automatically start any bot- or bridge-services. More on this in
-[Bots and Bridges](#bots-and-bridges).
-
-See the folder [system](system) for any service and target files.
-
-The folder [workers](workers) contains an example configuration for the
-`federation_reader` worker. Pay special attention to the name of the
-configuration file. In order to work with the `matrix-synapse-worker@.service`
-service, it needs to have the exact same name as the worker app.
-
-This setup expects neither the homeserver nor any workers to fork. Forking is
-handled by systemd.
-
-## Setup
-
-1. Adjust your matrix configs. Make sure that the worker config files have the
-exact same name as the worker app. Compare `matrix-synapse-worker@.service` for
-why. You can find an example worker config in the [workers](workers) folder. See
-below for relevant settings in the `homeserver.yaml`.
-2. Copy the `*.service` and `*.target` files in [system](system) to
-`/etc/systemd/system`.
-3. `systemctl enable matrix-synapse.service` this adds the homeserver
-app to the `matrix.target`
-4. *Optional.* `systemctl enable
-matrix-synapse-worker@federation_reader.service` this adds the federation_reader
-app to the `matrix-synapse.service`
-5. *Optional.* Repeat step 4 for any additional workers you require.
-6. *Optional.* Add any bots or bridges by enabling them.
-7. Start all matrix related services via `systemctl start matrix.target`
-8. *Optional.* Enable autostart of all matrix related services on system boot
-via `systemctl enable matrix.target`
-
-## Usage
-
-After you have setup you can use the following commands to manage your synapse
-installation:
-
-```
-# Start matrix-synapse, all workers and any enabled bots or bridges.
-systemctl start matrix.target
-
-# Restart matrix-synapse and all workers (not necessarily restarting bots
-# or bridges, see "Bots and Bridges")
-systemctl restart matrix-synapse.service
-
-# Stop matrix-synapse and all workers (not necessarily restarting bots
-# or bridges, see "Bots and Bridges")
-systemctl stop matrix-synapse.service
-
-# Restart a specific worker (i. e. federation_reader), the homeserver is
-# unaffected by this.
-systemctl restart matrix-synapse-worker@federation_reader.service
-
-# Add a new worker (assuming all configs are setup already)
-systemctl enable matrix-synapse-worker@federation_writer.service
-systemctl restart matrix-synapse.service
-```
-
-## The Configs
-
-Make sure the `worker_app` is set in the `homeserver.yaml` and it does not fork.
-
-```
-worker_app: synapse.app.homeserver 
-daemonize: false
-```
-
-None of the workers should fork, as forking is handled by systemd. Hence make
-sure this is present in all worker config files.
-
-```
-worker_daemonize: false
-```
-
-The config files of all workers are expected to be located in
-`/etc/matrix-synapse/workers`. If you want to use a different location you have
-to edit the provided `*.service` files accordingly.  
-
-## Bots and Bridges
-
-Most bots and bridges do not care if the homeserver goes down or is restarted.
-Depending on the implementation this may crash them though. So look up the docs
-or ask the community of the specific bridge or bot you want to run to make sure
-you choose the correct setup.
-
-Whichever configuration you choose, after the setup the following will enable
-automatically starting (and potentially restarting) your bot/bridge with the
-`matrix.target`.
-
-```
-systemctl enable <yourBotOrBridgeName>.service
-```
-
-**Note** that from an inactive synapse the bots/bridges will only be started with
-synapse if you start the `matrix.target`, not if you start the
-`matrix-synapse.service`. This is on purpose. Think of `matrix-synapse.service`
-as *just* synapse, but `matrix.target` being anything matrix related, including
-synapse and any and all enabled bots and bridges.
-
-### Start with synapse but ignore synapse going down
-
-If the bridge can handle shutdowns of the homeserver you'll want to install the
-service in the `matrix.target` and optionally add a
-`After=matrix-synapse.service` dependency to have the bot/bridge start after
-synapse on starting everything.
-
-In this case the service file should look like this.
-
-```
-[Unit]
-# ...
-# Optional, this will only ensure that if you start everything, synapse will
-# be started before the bot/bridge will be started.
-After=matrix-synapse.service
-
-[Service]
-# ...
-
-[Install]
-WantedBy=matrix.target
-```
-
-### Stop/restart when synapse stops/restarts
-
-If the bridge can't handle shutdowns of the homeserver you'll still want to
-install the service in the `matrix.target` but also have to specify the
-`After=matrix-synapse.service` *and* `BindsTo=matrix-synapse.service`
-dependencies to have the bot/bridge stop/restart with synapse.
-
-In this case the service file should look like this.
-
-```
-[Unit]
-# ...
-# Mandatory
-After=matrix-synapse.service
-BindsTo=matrix-synapse.service
-
-[Service]
-# ...
-
-[Install]
-WantedBy=matrix.target
-```
+The documentation for using systemd to manage synapse workers is now part of
+the main synapse distribution. See [docs/systemd-with-workers](../../docs/systemd-with-workers).

contrib/systemd-with-workers/system/matrix-synapse-worker@.service

@@ -1,19 +0,0 @@
-[Unit]
-Description=Synapse Matrix Worker
-After=matrix-synapse.service
-BindsTo=matrix-synapse.service
-
-[Service]
-Type=notify
-NotifyAccess=main
-User=matrix-synapse
-WorkingDirectory=/var/lib/matrix-synapse
-EnvironmentFile=/etc/default/matrix-synapse
-ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.%i --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --config-path=/etc/matrix-synapse/workers/%i.yaml
-ExecReload=/bin/kill -HUP $MAINPID
-Restart=always
-RestartSec=3
-SyslogIdentifier=matrix-synapse-%i
-
-[Install]
-WantedBy=matrix-synapse.service

contrib/systemd-with-workers/system/matrix.target

@@ -1,7 +0,0 @@
-[Unit]
-Description=Contains matrix services like synapse, bridges and bots
-After=network.target
-AllowIsolate=no
-
-[Install]
-WantedBy=multi-user.target

contrib/systemd/matrix-synapse.service

@@ -15,6 +15,9 @@
 
 [Unit]
 Description=Synapse Matrix homeserver
+# If you are using postgresql to persist data, uncomment this line to make sure
+# synapse starts after the postgresql service.
+# After=postgresql.service
 
 [Service]
 Type=notify

debian/build_virtualenv

@@ -36,7 +36,6 @@ esac
 dh_virtualenv \
     --install-suffix "matrix-synapse" \
     --builtin-venv \
-    --setuptools \
     --python "$SNAKE" \
     --upgrade-pip \
     --preinstall="lxml" \

debian/changelog

@@ -1,3 +1,102 @@
+matrix-synapse-py3 (1.15.1) stable; urgency=medium
+
+  * New synapse release 1.15.1.
+
+ -- Synapse Packaging team <packages@matrix.org>  Tue, 16 Jun 2020 10:27:50 +0100
+
+matrix-synapse-py3 (1.15.0) stable; urgency=medium
+
+  * New synapse release 1.15.0.
+
+ -- Synapse Packaging team <packages@matrix.org>  Thu, 11 Jun 2020 13:27:06 +0100
+
+matrix-synapse-py3 (1.14.0) stable; urgency=medium
+
+  * New synapse release 1.14.0.
+
+ -- Synapse Packaging team <packages@matrix.org>  Thu, 28 May 2020 10:37:27 +0000
+
+matrix-synapse-py3 (1.13.0) stable; urgency=medium
+
+  [ Patrick Cloke ]
+  * Add information about .well-known files to Debian installation scripts.
+
+  [ Synapse Packaging team ]
+  * New synapse release 1.13.0.
+
+ -- Synapse Packaging team <packages@matrix.org>  Tue, 19 May 2020 09:16:56 -0400
+
+matrix-synapse-py3 (1.12.4) stable; urgency=medium
+
+  * New synapse release 1.12.4.
+
+ -- Synapse Packaging team <packages@matrix.org>  Thu, 23 Apr 2020 10:58:14 -0400
+
+matrix-synapse-py3 (1.12.3) stable; urgency=medium
+
+  [ Richard van der Hoff ]
+  * Update the Debian build scripts to handle the new installation paths
+   for the support libraries introduced by Pillow 7.1.1.
+
+  [ Synapse Packaging team ]
+  * New synapse release 1.12.3.
+
+ -- Synapse Packaging team <packages@matrix.org>  Fri, 03 Apr 2020 10:55:03 +0100
+
+matrix-synapse-py3 (1.12.2) stable; urgency=medium
+
+  * New synapse release 1.12.2.
+
+ -- Synapse Packaging team <packages@matrix.org>  Mon, 02 Apr 2020 19:02:17 +0000
+
+matrix-synapse-py3 (1.12.1) stable; urgency=medium
+
+  * New synapse release 1.12.1.
+
+ -- Synapse Packaging team <packages@matrix.org>  Mon, 02 Apr 2020 11:30:47 +0000
+
+matrix-synapse-py3 (1.12.0) stable; urgency=medium
+
+  * New synapse release 1.12.0.
+
+ -- Synapse Packaging team <packages@matrix.org>  Mon, 23 Mar 2020 12:13:03 +0000
+
+matrix-synapse-py3 (1.11.1) stable; urgency=medium
+
+  * New synapse release 1.11.1.
+
+ -- Synapse Packaging team <packages@matrix.org>  Tue, 03 Mar 2020 15:01:22 +0000
+
+matrix-synapse-py3 (1.11.0) stable; urgency=medium
+
+  * New synapse release 1.11.0.
+
+ -- Synapse Packaging team <packages@matrix.org>  Fri, 21 Feb 2020 08:54:34 +0000
+
+matrix-synapse-py3 (1.10.1) stable; urgency=medium
+
+  * New synapse release 1.10.1.
+
+ -- Synapse Packaging team <packages@matrix.org>  Mon, 17 Feb 2020 16:27:28 +0000
+
+matrix-synapse-py3 (1.10.0) stable; urgency=medium
+
+  * New synapse release 1.10.0.
+
+ -- Synapse Packaging team <packages@matrix.org>  Wed, 12 Feb 2020 12:18:54 +0000
+
+matrix-synapse-py3 (1.9.1) stable; urgency=medium
+
+  * New synapse release 1.9.1.
+
+ -- Synapse Packaging team <packages@matrix.org>  Tue, 28 Jan 2020 13:09:23 +0000
+
+matrix-synapse-py3 (1.9.0) stable; urgency=medium
+
+  * New synapse release 1.9.0.
+
+ -- Synapse Packaging team <packages@matrix.org>  Thu, 23 Jan 2020 12:56:31 +0000
+
 matrix-synapse-py3 (1.8.0) stable; urgency=medium
 
   [ Richard van der Hoff ]

debian/po/templates.pot

@@ -1,14 +1,14 @@
 # SOME DESCRIPTIVE TITLE.
 # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the matrix-synapse package.
+# This file is distributed under the same license as the matrix-synapse-py3 package.
 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
 #
 #, fuzzy
 msgid ""
 msgstr ""
-"Project-Id-Version: matrix-synapse\n"
-"Report-Msgid-Bugs-To: matrix-synapse@packages.debian.org\n"
-"POT-Creation-Date: 2017-02-21 07:51+0000\n"
+"Project-Id-Version: matrix-synapse-py3\n"
+"Report-Msgid-Bugs-To: matrix-synapse-py3@packages.debian.org\n"
+"POT-Creation-Date: 2020-04-06 16:39-0400\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -28,7 +28,10 @@ msgstr ""
 #: ../templates:1001
 msgid ""
 "The name that this homeserver will appear as, to clients and other servers "
-"via federation. This name should match the SRV record published in DNS."
+"via federation. This is normally the public hostname of the server running "
+"synapse, but can be different if you set up delegation. Please refer to the "
+"delegation documentation in this case: https://github.com/matrix-org/synapse/"
+"blob/master/docs/delegate.md."
 msgstr ""
 
 #. Type: boolean

debian/rules

@@ -15,17 +15,38 @@ override_dh_installinit:
 # we don't really want to strip the symbols from our object files.
 override_dh_strip:
 
+# dh_shlibdeps calls dpkg-shlibdeps, which finds all the binary files
+# (executables and shared libs) in the package, and looks for the shared
+# libraries that they depend on. It then adds a dependency on the package that
+# contains that library to the package.
+#
+# We make two modifications to that process...
+#
 override_dh_shlibdeps:
-        # make the postgres package's dependencies a recommendation
-        # rather than a hard dependency.
+        # Firstly, postgres is not a hard dependency for us, so we want to make
+        # the things that psycopg2 depends on (such as libpq) be
+        # recommendations rather than hard dependencies. We do so by
+        # running dpkg-shlibdeps manually on psycopg2's libs.
+        #
 	find debian/$(PACKAGE_NAME)/ -path '*/site-packages/psycopg2/*.so' | \
 	    xargs dpkg-shlibdeps -Tdebian/$(PACKAGE_NAME).substvars \
 	        -pshlibs1 -dRecommends
 
-        # all the other dependencies can be normal 'Depends' requirements,
-        # except for PIL's, which is self-contained and which confuses
-        # dpkg-shlibdeps.
-	dh_shlibdeps -X site-packages/PIL/.libs -X site-packages/psycopg2
+        # secondly, we exclude PIL's libraries from the process. They are known
+        # to be self-contained, but they have interdependencies and
+        # dpkg-shlibdeps doesn't know how to resolve them.
+        #
+        # As of Pillow 7.1.0, these libraries are in
+        # site-packages/Pillow.libs. Previously, they were in
+        # site-packages/PIL/.libs.
+        #
+        # (we also need to exclude psycopg2, of course, since we've already
+        # dealt with that.)
+        #
+	dh_shlibdeps \
+	    -X site-packages/PIL/.libs \
+	    -X site-packages/Pillow.libs \
+	    -X site-packages/psycopg2
 
 override_dh_virtualenv:
 	./debian/build_virtualenv

debian/templates

@@ -2,8 +2,10 @@ Template: matrix-synapse/server-name
 Type: string
 _Description: Name of the server:
  The name that this homeserver will appear as, to clients and other
- servers via federation. This name should match the SRV record
- published in DNS.
+ servers via federation. This is normally the public hostname of the
+ server running synapse, but can be different if you set up delegation.
+ Please refer to the delegation documentation in this case:
+ https://github.com/matrix-org/synapse/blob/master/docs/delegate.md.
 
 Template: matrix-synapse/report-stats
 Type: boolean

docker/Dockerfile

@@ -16,7 +16,7 @@ ARG PYTHON_VERSION=3.7
 ###
 ### Stage 0: builder
 ###
-FROM docker.io/python:${PYTHON_VERSION}-alpine3.10 as builder
+FROM docker.io/python:${PYTHON_VERSION}-alpine3.11 as builder
 
 # install the OS build deps
 
@@ -55,7 +55,7 @@ RUN pip install --prefix="/install" --no-warn-script-location \
 ### Stage 1: runtime
 ###
 
-FROM docker.io/python:${PYTHON_VERSION}-alpine3.10
+FROM docker.io/python:${PYTHON_VERSION}-alpine3.11
 
 # xmlsec is required for saml support
 RUN apk add --no-cache --virtual .runtime_deps \

docker/Dockerfile-dhvirtualenv

@@ -27,15 +27,18 @@ RUN env DEBIAN_FRONTEND=noninteractive apt-get install \
         wget
 
 # fetch and unpack the package
-RUN wget -q -O /dh-virtuenv-1.1.tar.gz https://github.com/spotify/dh-virtualenv/archive/1.1.tar.gz
-RUN tar xvf /dh-virtuenv-1.1.tar.gz
+RUN mkdir /dh-virtualenv
+RUN wget -q -O /dh-virtualenv.tar.gz https://github.com/spotify/dh-virtualenv/archive/ac6e1b1.tar.gz
+RUN tar -xv --strip-components=1 -C /dh-virtualenv -f /dh-virtualenv.tar.gz
 
-# install its build deps
-RUN cd dh-virtualenv-1.1/ \
-    && env DEBIAN_FRONTEND=noninteractive mk-build-deps -ri -t "apt-get -yqq --no-install-recommends"
+# install its build deps. We do another apt-cache-update here, because we might
+# be using a stale cache from docker build.
+RUN apt-get update -qq -o Acquire::Languages=none \
+    && cd /dh-virtualenv \
+    && env DEBIAN_FRONTEND=noninteractive mk-build-deps -ri -t "apt-get -y --no-install-recommends"
 
 # build it
-RUN cd dh-virtualenv-1.1 && dpkg-buildpackage -us -uc -b
+RUN cd /dh-virtualenv && dpkg-buildpackage -us -uc -b
 
 ###
 ### Stage 1
@@ -68,12 +71,12 @@ RUN apt-get update -qq -o Acquire::Languages=none \
         sqlite3 \
         libpq-dev
 
-COPY --from=builder /dh-virtualenv_1.1-1_all.deb /
+COPY --from=builder /dh-virtualenv_1.2~dev-1_all.deb /
 
 # install dhvirtualenv. Update the apt cache again first, in case we got a
 # cached cache from docker the first time.
 RUN apt-get update -qq -o Acquire::Languages=none \
-    && apt-get install -yq /dh-virtualenv_1.1-1_all.deb
+    && apt-get install -yq /dh-virtualenv_1.2~dev-1_all.deb
 
 WORKDIR /synapse/source
 ENTRYPOINT ["bash","/synapse/source/docker/build_debian.sh"]

docker/README.md

@@ -110,12 +110,12 @@ argument to `docker run`.
 
 ## Legacy dynamic configuration file support
 
-For backwards-compatibility only, the docker image supports creating a dynamic
-configuration file based on environment variables. This is now deprecated, but
-is enabled when the `SYNAPSE_SERVER_NAME` variable is set (and `generate` is
-not given).
+The docker image used to support creating a dynamic configuration file based
+on environment variables. This is no longer supported, and an error will be
+raised if you try to run synapse without a config file.
 
-To migrate from a dynamic configuration file to a static one, run the docker
+It is, however, possible to generate a static configuration file based on
+the environment variables that were previously used. To do this, run the docker
 container once with the environment variables set, and `migrate_config`
 command line option. For example:
 
@@ -127,15 +127,20 @@ docker run -it --rm \
     matrixdotorg/synapse:latest migrate_config
 ```
 
-This will generate the same configuration file as the legacy mode used, but
-will store it in `/data/homeserver.yaml` instead of a temporary location. You
-can then use it as shown above at [Running synapse](#running-synapse).
+This will generate the same configuration file as the legacy mode used, and
+will store it in `/data/homeserver.yaml`. You can then use it as shown above at
+[Running synapse](#running-synapse).
+
+Note that the defaults used in this configuration file may be different to
+those when generating a new config file with `generate`: for example, TLS is
+enabled by default in this mode. You are encouraged to inspect the generated
+configuration file and edit it to ensure it meets your needs.
 
 ## Building the image
 
 If you need to build the image from a Synapse checkout, use the following `docker
  build` command from the repo's root:
- 
+
 ```
 docker build -t matrixdotorg/synapse -f docker/Dockerfile .
 ```

docker/start.py

@@ -188,11 +188,6 @@ def main(args, environ):
     else:
         ownership = "{}:{}".format(desired_uid, desired_gid)
 
-    log(
-        "Container running as UserID %s:%s, ENV (or defaults) requests %s:%s"
-        % (os.getuid(), os.getgid(), desired_uid, desired_gid)
-    )
-
     if ownership is None:
         log("Will not perform chmod/su-exec as UserID already matches request")
 
@@ -213,38 +208,30 @@ def main(args, environ):
     if mode is not None:
         error("Unknown execution mode '%s'" % (mode,))
 
-    if "SYNAPSE_SERVER_NAME" in environ:
-        # backwards-compatibility generate-a-config-on-the-fly mode
-        if "SYNAPSE_CONFIG_PATH" in environ:
-            error(
-                "SYNAPSE_SERVER_NAME can only be combined with SYNAPSE_CONFIG_PATH "
-                "in `generate` or `migrate_config` mode. To start synapse using a "
-                "config file, unset the SYNAPSE_SERVER_NAME environment variable."
-            )
+    config_dir = environ.get("SYNAPSE_CONFIG_DIR", "/data")
+    config_path = environ.get("SYNAPSE_CONFIG_PATH", config_dir + "/homeserver.yaml")
 
-        config_path = "/compiled/homeserver.yaml"
-        log(
-            "Generating config file '%s' on-the-fly from environment variables.\n"
-            "Note that this mode is deprecated. You can migrate to a static config\n"
-            "file by running with 'migrate_config'. See the README for more details."
-            % (config_path,)
-        )
-
-        generate_config_from_template("/compiled", config_path, environ, ownership)
-    else:
-        config_dir = environ.get("SYNAPSE_CONFIG_DIR", "/data")
-        config_path = environ.get(
-            "SYNAPSE_CONFIG_PATH", config_dir + "/homeserver.yaml"
-        )
-        if not os.path.exists(config_path):
+    if not os.path.exists(config_path):
+        if "SYNAPSE_SERVER_NAME" in environ:
             error(
-                "Config file '%s' does not exist. You should either create a new "
-                "config file by running with the `generate` argument (and then edit "
-                "the resulting file before restarting) or specify the path to an "
-                "existing config file with the SYNAPSE_CONFIG_PATH variable."
+                """\
+Config file '%s' does not exist.
+
+The synapse docker image no longer supports generating a config file on-the-fly
+based on environment variables. You can migrate to a static config file by
+running with 'migrate_config'. See the README for more details.
+"""
                 % (config_path,)
             )
 
+        error(
+            "Config file '%s' does not exist. You should either create a new "
+            "config file by running with the `generate` argument (and then edit "
+            "the resulting file before restarting) or specify the path to an "
+            "existing config file with the SYNAPSE_CONFIG_PATH variable."
+            % (config_path,)
+        )
+
     log("Starting synapse with config file " + config_path)
 
     args = ["python", "-m", synapse_worker, "--config-path", config_path]

docs/.sample_config_header.yaml

@@ -1,4 +1,4 @@
-# The config is maintained as an up-to-date snapshot of the default
+# This file is maintained as an up-to-date snapshot of the default
 # homeserver.yaml configuration generated by Synapse.
 #
 # It is intended to act as a reference for the default configuration,
@@ -10,3 +10,5 @@
 # homeserver.yaml. Instead, if you are starting from scratch, please generate
 # a fresh config using Synapse by following the instructions in INSTALL.md.
 
+################################################################################
+

docs/ACME.md

@@ -1,12 +1,48 @@
 # ACME
 
-Synapse v1.0 will require valid TLS certificates for communication between
-servers (port `8448` by default) in addition to those that are client-facing
-(port `443`). If you do not already have a valid certificate for your domain,
-the easiest way to get one is with Synapse's new ACME support, which will use
-the ACME protocol to provision a certificate automatically. Synapse v0.99.0+
-will provision server-to-server certificates automatically for you for free
-through [Let's Encrypt](https://letsencrypt.org/) if you tell it to.
+From version 1.0 (June 2019) onwards, Synapse requires valid TLS
+certificates for communication between servers (by default on port
+`8448`) in addition to those that are client-facing (port `443`). To
+help homeserver admins fulfil this new requirement, Synapse v0.99.0
+introduced support for automatically provisioning certificates through 
+[Let's Encrypt](https://letsencrypt.org/) using the ACME protocol.
+
+## Deprecation of ACME v1
+
+In [March 2019](https://community.letsencrypt.org/t/end-of-life-plan-for-acmev1/88430),
+Let's Encrypt announced that they were deprecating version 1 of the ACME
+protocol, with the plan to disable the use of it for new accounts in
+November 2019, and for existing accounts in June 2020.
+
+Synapse doesn't currently support version 2 of the ACME protocol, which
+means that:
+
+* for existing installs, Synapse's built-in ACME support will continue
+  to work until June 2020.
+* for new installs, this feature will not work at all.
+
+Either way, it is recommended to move from Synapse's ACME support
+feature to an external automated tool such as [certbot](https://github.com/certbot/certbot)
+(or browse [this list](https://letsencrypt.org/fr/docs/client-options/)
+for an alternative ACME client).
+
+It's also recommended to use a reverse proxy for the server-facing
+communications (more documentation about this can be found
+[here](/docs/reverse_proxy.md)) as well as the client-facing ones and
+have it serve the certificates.
+
+In case you can't do that and need Synapse to serve them itself, make
+sure to set the `tls_certificate_path` configuration setting to the path
+of the certificate (make sure to use the certificate containing the full
+certification chain, e.g. `fullchain.pem` if using certbot) and
+`tls_private_key_path` to the path of the matching private key. Note
+that in this case you will need to restart Synapse after each
+certificate renewal so that Synapse stops using the old certificate.
+
+If you still want to use Synapse's built-in ACME support, the rest of
+this document explains how to set it up. 
+
+## Initial setup 
 
 In the case that your `server_name` config variable is the same as
 the hostname that the client connects to, then the same certificate can be
@@ -32,11 +68,6 @@ If you already have certificates, you will need to back up or delete them
 (files `example.com.tls.crt` and `example.com.tls.key` in Synapse's root
 directory), Synapse's ACME implementation will not overwrite them.
 
-You may wish to use alternate methods such as Certbot to obtain a certificate
-from Let's Encrypt, depending on your server configuration. Of course, if you
-already have a valid certificate for your homeserver's domain, that can be
-placed in Synapse's config directory without the need for any ACME setup.
-
 ## ACME setup
 
 The main steps for enabling ACME support in short summary are:

docs/admin_api/README.rst

@@ -4,17 +4,21 @@ Admin APIs
 This directory includes documentation for the various synapse specific admin
 APIs available.
 
-Only users that are server admins can use these APIs. A user can be marked as a
-server admin by updating the database directly, e.g.:
+Authenticating as a server admin
+--------------------------------
 
-``UPDATE users SET admin = 1 WHERE name = '@foo:bar.com'``
+Many of the API calls in the admin api will require an `access_token` for a
+server admin. (Note that a server admin is distinct from a room admin.)
 
-Restarting may be required for the changes to register.
+A user can be marked as a server admin by updating the database directly, e.g.:
 
-Using an admin access_token
-###########################
+.. code-block:: sql
+
+    UPDATE users SET admin = 1 WHERE name = '@foo:bar.com';
+
+A new server admin user can also be created using the
+``register_new_matrix_user`` script.
 
-Many of the API calls listed in the documentation here will require to include an admin `access_token`.
 Finding your user's `access_token` is client-dependent, but will usually be shown in the client's settings.
 
 Once you have your `access_token`, to include it in a request, the best option is to add the token to a request header:

docs/admin_api/delete_group.md

@@ -4,11 +4,11 @@ This API lets a server admin delete a local group. Doing so will kick all
 users out of the group so that their clients will correctly handle the group
 being deleted.
 
-
 The API is:
 
 ```
 POST /_synapse/admin/v1/delete_group/<group_id>
 ```
 
-including an `access_token` of a server admin.
+To use it, you will need to authenticate by providing an `access_token` for a
+server admin: see [README.rst](README.rst).

docs/admin_api/media_admin_api.md

@@ -6,9 +6,10 @@ The API is:
 ```
 GET /_synapse/admin/v1/room/<room_id>/media
 ```
-including an `access_token` of a server admin.
+To use it, you will need to authenticate by providing an `access_token` for a
+server admin: see [README.rst](README.rst).
 
-It returns a JSON body like the following:
+The API returns a JSON body like the following:
 ```
 {
     "local": [
@@ -22,19 +23,80 @@ It returns a JSON body like the following:
 }
 ```
 
-# Quarantine media in a room
-
-This API 'quarantines' all the media in a room.
-
-The API is:
-
-```
-POST /_synapse/admin/v1/quarantine_media/<room_id>
-
-{}
-```
+# Quarantine media
 
 Quarantining media means that it is marked as inaccessible by users. It applies
 to any local media, and any locally-cached copies of remote media.
 
 The media file itself (and any thumbnails) is not deleted from the server.
+
+## Quarantining media by ID
+
+This API quarantines a single piece of local or remote media.
+
+Request:
+
+```
+POST /_synapse/admin/v1/media/quarantine/<server_name>/<media_id>
+
+{}
+```
+
+Where `server_name` is in the form of `example.org`, and `media_id` is in the
+form of `abcdefg12345...`.
+
+Response:
+
+```
+{}
+```
+
+## Quarantining media in a room
+
+This API quarantines all local and remote media in a room.
+
+Request:
+
+```
+POST /_synapse/admin/v1/room/<room_id>/media/quarantine
+
+{}
+```
+
+Where `room_id` is in the form of `!roomid12345:example.org`.
+
+Response:
+
+```
+{
+  "num_quarantined": 10  # The number of media items successfully quarantined
+}
+```
+
+Note that there is a legacy endpoint, `POST
+/_synapse/admin/v1/quarantine_media/<room_id >`, that operates the same.
+However, it is deprecated and may be removed in a future release.
+
+## Quarantining all media of a user
+
+This API quarantines all *local* media that a *local* user has uploaded. That is to say, if
+you would like to quarantine media uploaded by a user on a remote homeserver, you should
+instead use one of the other APIs.
+
+Request:
+
+```
+POST /_synapse/admin/v1/user/<user_id>/media/quarantine
+
+{}
+```
+
+Where `user_id` is in the form of `@bob:example.org`.
+
+Response:
+
+```
+{
+  "num_quarantined": 10  # The number of media items successfully quarantined
+}
+```

docs/admin_api/purge_history_api.rst

@@ -8,11 +8,15 @@ Depending on the amount of history being purged a call to the API may take
 several minutes or longer. During this period users will not be able to
 paginate further back in the room from the point being purged from.
 
+Note that Synapse requires at least one message in each room, so it will never
+delete the last message in a room.
+
 The API is:
 
 ``POST /_synapse/admin/v1/purge_history/<room_id>[/<event_id>]``
 
-including an ``access_token`` of a server admin.
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
 
 By default, events sent by local users are not deleted, as they may represent
 the only copies of this content in existence. (Events sent by remote users are
@@ -51,8 +55,10 @@ It is possible to poll for updates on recent purges with a second API;
 
 ``GET /_synapse/admin/v1/purge_history_status/<purge_id>``
 
-(again, with a suitable ``access_token``). This API returns a JSON body like
-the following:
+Again, you will need to authenticate by providing an ``access_token`` for a
+server admin.
+
+This API returns a JSON body like the following:
 
 .. code:: json
 

docs/admin_api/purge_remote_media.rst

@@ -6,12 +6,15 @@ media.
 
 The API is::
 
-    POST /_synapse/admin/v1/purge_media_cache?before_ts=<unix_timestamp_in_ms>&access_token=<access_token>
+    POST /_synapse/admin/v1/purge_media_cache?before_ts=<unix_timestamp_in_ms>
 
     {}
 
-Which will remove all cached media that was last accessed before
+\... which will remove all cached media that was last accessed before
 ``<unix_timestamp_in_ms>``.
 
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
+
 If the user re-requests purged remote media, synapse will re-request the media
 from the originating server.

docs/admin_api/room_membership.md

@@ -0,0 +1,35 @@
+# Edit Room Membership API
+
+This API allows an administrator to join an user account with a given `user_id`
+to a room with a given `room_id_or_alias`. You can only modify the membership of
+local users. The server administrator must be in the room and have permission to
+invite users.
+
+## Parameters
+
+The following parameters are available:
+
+* `user_id` - Fully qualified user: for example, `@user:server.com`.
+* `room_id_or_alias` - The room identifier or alias to join: for example,
+  `!636q39766251:server.com`.
+
+## Usage
+
+```
+POST /_synapse/admin/v1/join/<room_id_or_alias>
+
+{
+  "user_id": "@user:server.com"
+}
+```
+
+To use it, you will need to authenticate by providing an `access_token` for a
+server admin: see [README.rst](README.rst).
+
+Response:
+
+```
+{
+  "room_id": "!636q39766251:server.com"
+}
+```

docs/admin_api/rooms.md

@@ -0,0 +1,320 @@
+# List Room API
+
+The List Room admin API allows server admins to get a list of rooms on their
+server. There are various parameters available that allow for filtering and
+sorting the returned list. This API supports pagination.
+
+## Parameters
+
+The following query parameters are available:
+
+* `from` - Offset in the returned list. Defaults to `0`.
+* `limit` - Maximum amount of rooms to return. Defaults to `100`.
+* `order_by` - The method in which to sort the returned list of rooms. Valid values are:
+  - `alphabetical` - Same as `name`. This is deprecated.
+  - `size` - Same as `joined_members`. This is deprecated.
+  - `name` - Rooms are ordered alphabetically by room name. This is the default.
+  - `canonical_alias` - Rooms are ordered alphabetically by main alias address of the room.
+  - `joined_members` - Rooms are ordered by the number of members. Largest to smallest.
+  - `joined_local_members` - Rooms are ordered by the number of local members. Largest to smallest.
+  - `version` - Rooms are ordered by room version. Largest to smallest.
+  - `creator` - Rooms are ordered alphabetically by creator of the room.
+  - `encryption` - Rooms are ordered alphabetically by the end-to-end encryption algorithm.
+  - `federatable` - Rooms are ordered by whether the room is federatable.
+  - `public` - Rooms are ordered by visibility in room list.
+  - `join_rules` - Rooms are ordered alphabetically by join rules of the room.
+  - `guest_access` - Rooms are ordered alphabetically by guest access option of the room.
+  - `history_visibility` - Rooms are ordered alphabetically by visibility of history of the room.
+  - `state_events` - Rooms are ordered by number of state events. Largest to smallest.
+* `dir` - Direction of room order. Either `f` for forwards or `b` for backwards. Setting
+          this value to `b` will reverse the above sort order. Defaults to `f`.
+* `search_term` - Filter rooms by their room name. Search term can be contained in any
+                  part of the room name. Defaults to no filtering.
+
+The following fields are possible in the JSON response body:
+
+* `rooms` - An array of objects, each containing information about a room.
+  - Room objects contain the following fields:
+    - `room_id` - The ID of the room.
+    - `name` - The name of the room.
+    - `canonical_alias` - The canonical (main) alias address of the room.
+    - `joined_members` - How many users are currently in the room.
+    - `joined_local_members` - How many local users are currently in the room.
+    - `version` - The version of the room as a string.
+    - `creator` - The `user_id` of the room creator.
+    - `encryption` - Algorithm of end-to-end encryption of messages. Is `null` if encryption is not active.
+    - `federatable` - Whether users on other servers can join this room.
+    - `public` - Whether the room is visible in room directory.
+    - `join_rules` - The type of rules used for users wishing to join this room. One of: ["public", "knock", "invite", "private"].
+    - `guest_access` - Whether guests can join the room. One of: ["can_join", "forbidden"].
+    - `history_visibility` - Who can see the room history. One of: ["invited", "joined", "shared", "world_readable"].
+    - `state_events` - Total number of state_events of a room. Complexity of the room.
+* `offset` - The current pagination offset in rooms. This parameter should be
+             used instead of `next_token` for room offset as `next_token` is
+             not intended to be parsed.
+* `total_rooms` - The total number of rooms this query can return. Using this
+                  and `offset`, you have enough information to know the current
+                  progression through the list.
+* `next_batch` - If this field is present, we know that there are potentially
+                 more rooms on the server that did not all fit into this response.
+                 We can use `next_batch` to get the "next page" of results. To do
+                 so, simply repeat your request, setting the `from` parameter to
+                 the value of `next_batch`.
+* `prev_batch` - If this field is present, it is possible to paginate backwards.
+                 Use `prev_batch` for the `from` value in the next request to
+                 get the "previous page" of results.
+
+## Usage
+
+A standard request with no filtering:
+
+```
+GET /_synapse/admin/v1/rooms
+
+{}
+```
+
+Response:
+
+```
+{
+  "rooms": [
+    {
+      "room_id": "!OGEhHVWSdvArJzumhm:matrix.org",
+      "name": "Matrix HQ",
+      "canonical_alias": "#matrix:matrix.org",
+      "joined_members": 8326,
+      "joined_local_members": 2,
+      "version": "1",
+      "creator": "@foo:matrix.org",
+      "encryption": null,
+      "federatable": true,
+      "public": true,
+      "join_rules": "invite",
+      "guest_access": null,
+      "history_visibility": "shared",
+      "state_events": 93534
+    },
+    ... (8 hidden items) ...
+    {
+      "room_id": "!xYvNcQPhnkrdUmYczI:matrix.org",
+      "name": "This Week In Matrix (TWIM)",
+      "canonical_alias": "#twim:matrix.org",
+      "joined_members": 314,
+      "joined_local_members": 20,
+      "version": "4",
+      "creator": "@foo:matrix.org",
+      "encryption": "m.megolm.v1.aes-sha2",
+      "federatable": true,
+      "public": false,
+      "join_rules": "invite",
+      "guest_access": null,
+      "history_visibility": "shared",
+      "state_events": 8345
+    }
+  ],
+  "offset": 0,
+  "total_rooms": 10
+}
+```
+
+Filtering by room name:
+
+```
+GET /_synapse/admin/v1/rooms?search_term=TWIM
+
+{}
+```
+
+Response:
+
+```
+{
+  "rooms": [
+    {
+      "room_id": "!xYvNcQPhnkrdUmYczI:matrix.org",
+      "name": "This Week In Matrix (TWIM)",
+      "canonical_alias": "#twim:matrix.org",
+      "joined_members": 314,
+      "joined_local_members": 20,
+      "version": "4",
+      "creator": "@foo:matrix.org",
+      "encryption": "m.megolm.v1.aes-sha2",
+      "federatable": true,
+      "public": false,
+      "join_rules": "invite",
+      "guest_access": null,
+      "history_visibility": "shared",
+      "state_events": 8
+    }
+  ],
+  "offset": 0,
+  "total_rooms": 1
+}
+```
+
+Paginating through a list of rooms:
+
+```
+GET /_synapse/admin/v1/rooms?order_by=size
+
+{}
+```
+
+Response:
+
+```
+{
+  "rooms": [
+    {
+      "room_id": "!OGEhHVWSdvArJzumhm:matrix.org",
+      "name": "Matrix HQ",
+      "canonical_alias": "#matrix:matrix.org",
+      "joined_members": 8326,
+      "joined_local_members": 2,
+      "version": "1",
+      "creator": "@foo:matrix.org",
+      "encryption": null,
+      "federatable": true,
+      "public": true,
+      "join_rules": "invite",
+      "guest_access": null,
+      "history_visibility": "shared",
+      "state_events": 93534
+    },
+    ... (98 hidden items) ...
+    {
+      "room_id": "!xYvNcQPhnkrdUmYczI:matrix.org",
+      "name": "This Week In Matrix (TWIM)",
+      "canonical_alias": "#twim:matrix.org",
+      "joined_members": 314,
+      "joined_local_members": 20,
+      "version": "4",
+      "creator": "@foo:matrix.org",
+      "encryption": "m.megolm.v1.aes-sha2",
+      "federatable": true,
+      "public": false,
+      "join_rules": "invite",
+      "guest_access": null,
+      "history_visibility": "shared",
+      "state_events": 8345
+    }
+  ],
+  "offset": 0,
+  "total_rooms": 150
+  "next_token": 100
+}
+```
+
+The presence of the `next_token` parameter tells us that there are more rooms
+than returned in this request, and we need to make another request to get them.
+To get the next batch of room results, we repeat our request, setting the `from`
+parameter to the value of `next_token`.
+
+```
+GET /_synapse/admin/v1/rooms?order_by=size&from=100
+
+{}
+```
+
+Response:
+
+```
+{
+  "rooms": [
+    {
+      "room_id": "!mscvqgqpHYjBGDxNym:matrix.org",
+      "name": "Music Theory",
+      "canonical_alias": "#musictheory:matrix.org",
+      "joined_members": 127
+      "joined_local_members": 2,
+      "version": "1",
+      "creator": "@foo:matrix.org",
+      "encryption": null,
+      "federatable": true,
+      "public": true,
+      "join_rules": "invite",
+      "guest_access": null,
+      "history_visibility": "shared",
+      "state_events": 93534
+    },
+    ... (48 hidden items) ...
+    {
+      "room_id": "!twcBhHVdZlQWuuxBhN:termina.org.uk",
+      "name": "weechat-matrix",
+      "canonical_alias": "#weechat-matrix:termina.org.uk",
+      "joined_members": 137
+      "joined_local_members": 20,
+      "version": "4",
+      "creator": "@foo:termina.org.uk",
+      "encryption": null,
+      "federatable": true,
+      "public": true,
+      "join_rules": "invite",
+      "guest_access": null,
+      "history_visibility": "shared",
+      "state_events": 8345
+    }
+  ],
+  "offset": 100,
+  "prev_batch": 0,
+  "total_rooms": 150
+}
+```
+
+Once the `next_token` parameter is no longer present, we know we've reached the
+end of the list.
+
+# DRAFT: Room Details API
+
+The Room Details admin API allows server admins to get all details of a room.
+
+This API is still a draft and details might change!
+
+The following fields are possible in the JSON response body:
+
+* `room_id` - The ID of the room.
+* `name` - The name of the room.
+* `canonical_alias` - The canonical (main) alias address of the room.
+* `joined_members` - How many users are currently in the room.
+* `joined_local_members` - How many local users are currently in the room.
+* `version` - The version of the room as a string.
+* `creator` - The `user_id` of the room creator.
+* `encryption` - Algorithm of end-to-end encryption of messages. Is `null` if encryption is not active.
+* `federatable` - Whether users on other servers can join this room.
+* `public` - Whether the room is visible in room directory.
+* `join_rules` - The type of rules used for users wishing to join this room. One of: ["public", "knock", "invite", "private"].
+* `guest_access` - Whether guests can join the room. One of: ["can_join", "forbidden"].
+* `history_visibility` - Who can see the room history. One of: ["invited", "joined", "shared", "world_readable"].
+* `state_events` - Total number of state_events of a room. Complexity of the room.
+
+## Usage
+
+A standard request:
+
+```
+GET /_synapse/admin/v1/rooms/<room_id>
+
+{}
+```
+
+Response:
+
+```
+{
+  "room_id": "!mscvqgqpHYjBGDxNym:matrix.org",
+  "name": "Music Theory",
+  "canonical_alias": "#musictheory:matrix.org",
+  "joined_members": 127
+  "joined_local_members": 2,
+  "version": "1",
+  "creator": "@foo:matrix.org",
+  "encryption": null,
+  "federatable": true,
+  "public": true,
+  "join_rules": "invite",
+  "guest_access": null,
+  "history_visibility": "shared",
+  "state_events": 93534
+}
+```

docs/admin_api/user_admin_api.rst

@@ -1,3 +1,100 @@
+.. contents::
+
+Query User Account
+==================
+
+This API returns information about a specific user account.
+
+The api is::
+
+    GET /_synapse/admin/v2/users/<user_id>
+
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
+
+It returns a JSON body like the following:
+
+.. code:: json
+
+    {
+        "displayname": "User",
+        "threepids": [
+            {
+                "medium": "email",
+                "address": "<user_mail_1>"
+            },
+            {
+                "medium": "email",
+                "address": "<user_mail_2>"
+            }
+        ],
+        "avatar_url": "<avatar_url>",
+        "admin": false,
+        "deactivated": false
+    }
+
+URL parameters:
+
+- ``user_id``: fully-qualified user id: for example, ``@user:server.com``.
+
+Create or modify Account
+========================
+
+This API allows an administrator to create or modify a user account with a
+specific ``user_id``.
+
+This api is::
+
+    PUT /_synapse/admin/v2/users/<user_id>
+
+with a body of:
+
+.. code:: json
+
+    {
+        "password": "user_password",
+        "displayname": "User",
+        "threepids": [
+            {
+                "medium": "email",
+                "address": "<user_mail_1>"
+            },
+            {
+                "medium": "email",
+                "address": "<user_mail_2>"
+            }
+        ],
+        "avatar_url": "<avatar_url>",
+        "admin": false,
+        "deactivated": false
+    }
+
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
+
+URL parameters:
+
+- ``user_id``: fully-qualified user id: for example, ``@user:server.com``.
+
+Body parameters:
+
+- ``password``, optional. If provided, the user's password is updated and all
+  devices are logged out.
+
+- ``displayname``, optional, defaults to the value of ``user_id``.
+
+- ``threepids``, optional, allows setting the third-party IDs (email, msisdn)
+  belonging to a user.
+
+- ``avatar_url``, optional, must be a
+  `MXC URI <https://matrix.org/docs/spec/client_server/r0.6.0#matrix-content-mxc-uris>`_.
+
+- ``admin``, optional, defaults to ``false``.
+
+- ``deactivated``, optional, defaults to ``false``.
+
+If the user already exists then optional parameters default to the current value.
+
 List Accounts
 =============
 
@@ -7,17 +104,27 @@ The api is::
 
     GET /_synapse/admin/v2/users?from=0&limit=10&guests=false
 
-including an ``access_token`` of a server admin.
-The parameters ``from`` and ``limit`` are required only for pagination.
-By default, a ``limit`` of 100 is used.
-The parameter ``user_id`` can be used to select only users with user ids that
-contain this value.
-The parameter ``guests=false`` can be used to exclude guest users,
-default is to include guest users.
-The parameter ``deactivated=true`` can be used to include deactivated users,
-default is to exclude deactivated users.
-If the endpoint does not return a ``next_token`` then there are no more users left.
-It returns a JSON body like the following:
+To use it, you will need to authenticate by providing an `access_token` for a
+server admin: see `README.rst <README.rst>`_.
+
+The parameter ``from`` is optional but used for pagination, denoting the
+offset in the returned results. This should be treated as an opaque value and
+not explicitly set to anything other than the return value of ``next_token``
+from a previous call.
+
+The parameter ``limit`` is optional but is used for pagination, denoting the
+maximum number of items to return in this call. Defaults to ``100``.
+
+The parameter ``user_id`` is optional and filters to only users with user IDs
+that contain this value.
+
+The parameter ``guests`` is optional and if ``false`` will **exclude** guest users.
+Defaults to ``true`` to include guest users.
+
+The parameter ``deactivated`` is optional and if ``true`` will **include** deactivated users.
+Defaults to ``false`` to exclude deactivated users.
+
+A JSON body is returned with the following shape:
 
 .. code:: json
 
@@ -29,30 +136,41 @@ It returns a JSON body like the following:
                 "is_guest": 0,
                 "admin": 0,
                 "user_type": null,
-                "deactivated": 0
+                "deactivated": 0,
+                "displayname": "<User One>",
+                "avatar_url": null
             }, {
                 "name": "<user_id2>",
                 "password_hash": "<password_hash2>",
                 "is_guest": 0,
                 "admin": 1,
                 "user_type": null,
-                "deactivated": 0
+                "deactivated": 0,
+                "displayname": "<User Two>",
+                "avatar_url": "<avatar_url>"
             }
         ],
-        "next_token": "100"
+        "next_token": "100",
+        "total": 200
     }
 
+To paginate, check for ``next_token`` and if present, call the endpoint again
+with ``from`` set to the value of ``next_token``. This will return a new page.
 
-Query Account
-=============
+If the endpoint does not return a ``next_token`` then there are no more users
+to paginate through.
 
-This API returns information about a specific user account.
+Query current sessions for a user
+=================================
+
+This API returns information about the active sessions for a specific user.
 
 The api is::
 
     GET /_synapse/admin/v1/whois/<user_id>
 
-including an ``access_token`` of a server admin.
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
 
 It returns a JSON body like the following:
 
@@ -105,9 +223,10 @@ with a body of:
         "erase": true
     }
 
-including an ``access_token`` of a server admin.
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
 
-The erase parameter is optional and defaults to 'false'.
+The erase parameter is optional and defaults to ``false``.
 An empty body may be passed for backwards compatibility.
 
 
@@ -125,11 +244,15 @@ with a body of:
 .. code:: json
 
    {
-       "new_password": "<secret>"
+       "new_password": "<secret>",
+       "logout_devices": true,
    }
 
-including an ``access_token`` of a server admin.
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
 
+The parameter ``new_password`` is required.
+The parameter ``logout_devices`` is optional and defaults to ``true``.
 
 Get whether a user is a server administrator or not
 ===================================================
@@ -139,7 +262,8 @@ The api is::
 
     GET /_synapse/admin/v1/users/<user_id>/admin
 
-including an ``access_token`` of a server admin.
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
 
 A response body like the following is returned:
 
@@ -167,4 +291,191 @@ with a body of:
         "admin": true
     }
 
-including an ``access_token`` of a server admin.
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
+
+
+User devices
+============
+
+List all devices
+----------------
+Gets information about all devices for a specific ``user_id``.
+
+The API is::
+
+  GET /_synapse/admin/v2/users/<user_id>/devices
+
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
+
+A response body like the following is returned:
+
+.. code:: json
+
+    {
+      "devices": [
+        {
+          "device_id": "QBUAZIFURK",
+          "display_name": "android",
+          "last_seen_ip": "1.2.3.4",
+          "last_seen_ts": 1474491775024,
+          "user_id": "<user_id>"
+        },
+        {
+          "device_id": "AUIECTSRND",
+          "display_name": "ios",
+          "last_seen_ip": "1.2.3.5",
+          "last_seen_ts": 1474491775025,
+          "user_id": "<user_id>"
+        }
+      ]
+    }
+
+**Parameters**
+
+The following parameters should be set in the URL:
+
+- ``user_id`` - fully qualified: for example, ``@user:server.com``.
+
+**Response**
+
+The following fields are returned in the JSON response body:
+
+- ``devices`` - An array of objects, each containing information about a device.
+  Device objects contain the following fields:
+
+  - ``device_id`` - Identifier of device.
+  - ``display_name`` - Display name set by the user for this device.
+    Absent if no name has been set.
+  - ``last_seen_ip`` - The IP address where this device was last seen.
+    (May be a few minutes out of date, for efficiency reasons).
+  - ``last_seen_ts`` - The timestamp (in milliseconds since the unix epoch) when this
+    devices was last seen. (May be a few minutes out of date, for efficiency reasons).
+  - ``user_id`` - Owner of  device.
+
+Delete multiple devices
+------------------
+Deletes the given devices for a specific ``user_id``, and invalidates
+any access token associated with them.
+
+The API is::
+
+    POST /_synapse/admin/v2/users/<user_id>/delete_devices
+
+    {
+      "devices": [
+        "QBUAZIFURK",
+        "AUIECTSRND"
+      ],
+    }
+
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
+
+An empty JSON dict is returned.
+
+**Parameters**
+
+The following parameters should be set in the URL:
+
+- ``user_id`` - fully qualified: for example, ``@user:server.com``.
+
+The following fields are required in the JSON request body:
+
+- ``devices`` - The list of device IDs to delete.
+
+Show a device
+---------------
+Gets information on a single device, by ``device_id`` for a specific ``user_id``.
+
+The API is::
+
+    GET /_synapse/admin/v2/users/<user_id>/devices/<device_id>
+
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
+
+A response body like the following is returned:
+
+.. code:: json
+
+    {
+      "device_id": "<device_id>",
+      "display_name": "android",
+      "last_seen_ip": "1.2.3.4",
+      "last_seen_ts": 1474491775024,
+      "user_id": "<user_id>"
+    }
+
+**Parameters**
+
+The following parameters should be set in the URL:
+
+- ``user_id`` - fully qualified: for example, ``@user:server.com``.
+- ``device_id`` - The device to retrieve.
+
+**Response**
+
+The following fields are returned in the JSON response body:
+
+- ``device_id`` - Identifier of device.
+- ``display_name`` - Display name set by the user for this device.
+  Absent if no name has been set.
+- ``last_seen_ip`` - The IP address where this device was last seen.
+  (May be a few minutes out of date, for efficiency reasons).
+- ``last_seen_ts`` - The timestamp (in milliseconds since the unix epoch) when this
+  devices was last seen. (May be a few minutes out of date, for efficiency reasons).
+- ``user_id`` - Owner of  device.
+
+Update a device
+---------------
+Updates the metadata on the given ``device_id`` for a specific ``user_id``.
+
+The API is::
+
+    PUT /_synapse/admin/v2/users/<user_id>/devices/<device_id>
+
+    {
+      "display_name": "My other phone"
+    }
+
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
+
+An empty JSON dict is returned.
+
+**Parameters**
+
+The following parameters should be set in the URL:
+
+- ``user_id`` - fully qualified: for example, ``@user:server.com``.
+- ``device_id`` - The device to update.
+
+The following fields are required in the JSON request body:
+
+- ``display_name`` - The new display name for this device. If not given,
+  the display name is unchanged.
+
+Delete a device
+---------------
+Deletes the given ``device_id`` for a specific ``user_id``,
+and invalidates any access token associated with it.
+
+The API is::
+
+    DELETE /_synapse/admin/v2/users/<user_id>/devices/<device_id>
+
+    {}
+
+To use it, you will need to authenticate by providing an ``access_token`` for a
+server admin: see `README.rst <README.rst>`_.
+
+An empty JSON dict is returned.
+
+**Parameters**
+
+The following parameters should be set in the URL:
+
+- ``user_id`` - fully qualified: for example, ``@user:server.com``.
+- ``device_id`` - The device to delete.

docs/application_services.md

@@ -23,9 +23,13 @@ namespaces:
   users:  # List of users we're interested in
     - exclusive: <bool>
       regex: <regex>
+      group_id: <group>
     - ...
   aliases: []  # List of aliases we're interested in
   rooms: [] # List of room ids we're interested in
 ```
 
+`exclusive`: If enabled, only this application service is allowed to register users in its namespace(s).
+`group_id`: All users of this application service are dynamically joined to this group. This is useful for e.g user organisation or flairs.
+
 See the [spec](https://matrix.org/docs/spec/application_service/unstable.html) for further details on how application services work.

docs/code_style.md

@@ -30,7 +30,7 @@ The necessary tools are detailed below.
 
     Install `flake8` with:
 
-        pip install --upgrade flake8
+        pip install --upgrade flake8 flake8-comprehensions
 
     Check all application and test code with:
 

docs/delegate.md

@@ -0,0 +1,94 @@
+# Delegation
+
+By default, other homeservers will expect to be able to reach yours via
+your `server_name`, on port 8448. For example, if you set your `server_name`
+to `example.com` (so that your user names look like `@user:example.com`),
+other servers will try to connect to yours at `https://example.com:8448/`.
+
+Delegation is a Matrix feature allowing a homeserver admin to retain a
+`server_name` of `example.com` so that user IDs, room aliases, etc continue
+to look like `*:example.com`, whilst having federation traffic routed
+to a different server and/or port (e.g. `synapse.example.com:443`).
+
+## .well-known delegation
+
+To use this method, you need to be able to alter the
+`server_name` 's https server to serve the `/.well-known/matrix/server`
+URL. Having an active server (with a valid TLS certificate) serving your
+`server_name` domain is out of the scope of this documentation.
+
+The URL `https://<server_name>/.well-known/matrix/server` should
+return a JSON structure containing the key `m.server` like so:
+
+```json
+{
+    "m.server": "<synapse.server.name>[:<yourport>]"
+}
+```
+
+In our example, this would mean that URL `https://example.com/.well-known/matrix/server`
+should return:
+
+```json
+{
+    "m.server": "synapse.example.com:443"
+}
+```
+
+Note, specifying a port is optional. If no port is specified, then it defaults
+to 8448.
+
+With .well-known delegation, federating servers will check for a valid TLS
+certificate for the delegated hostname (in our example: `synapse.example.com`).
+
+## SRV DNS record delegation
+
+It is also possible to do delegation using a SRV DNS record. However, that is
+considered an advanced topic since it's a bit complex to set up, and `.well-known`
+delegation is already enough in most cases.
+
+However, if you really need it, you can find some documentation on how such a
+record should look like and how Synapse will use it in [the Matrix
+specification](https://matrix.org/docs/spec/server_server/latest#resolving-server-names).
+
+## Delegation FAQ
+
+### When do I need delegation?
+
+If your homeserver's APIs are accessible on the default federation port (8448)
+and the domain your `server_name` points to, you do not need any delegation.
+
+For instance, if you registered `example.com` and pointed its DNS A record at a
+fresh server, you could install Synapse on that host, giving it a `server_name`
+of `example.com`, and once a reverse proxy has been set up to proxy all requests
+sent to the port `8448` and serve TLS certificates for `example.com`, you
+wouldn't need any delegation set up.
+
+**However**, if your homeserver's APIs aren't accessible on port 8448 and on the
+domain `server_name` points to, you will need to let other servers know how to
+find it using delegation.
+
+### Do you still recommend against using a reverse proxy on the federation port?
+
+We no longer actively recommend against using a reverse proxy. Many admins will
+find it easier to direct federation traffic to a reverse proxy and manage their
+own TLS certificates, and this is a supported configuration.
+
+See [reverse_proxy.md](reverse_proxy.md) for information on setting up a
+reverse proxy.
+
+### Do I still need to give my TLS certificates to Synapse if I am using a reverse proxy?
+
+This is no longer necessary. If you are using a reverse proxy for all of your
+TLS traffic, then you can set `no_tls: True` in the Synapse config.
+
+In that case, the only reason Synapse needs the certificate is to populate a legacy
+`tls_fingerprints` field in the federation API. This is ignored by Synapse 0.99.0
+and later, and the only time pre-0.99 Synapses will check it is when attempting to
+fetch the server keys - and generally this is delegated via `matrix.org`, which
+is running a modern version of Synapse.
+
+### Do I need the same certificate for the client and federation port?
+
+No. There is nothing stopping you from using different certificates,
+particularly if you are using a reverse proxy.

docs/dev/cas.md

@@ -0,0 +1,64 @@
+# How to test CAS as a developer without a server
+
+The [django-mama-cas](https://github.com/jbittel/django-mama-cas) project is an
+easy to run CAS implementation built on top of Django.
+
+## Prerequisites
+
+1. Create a new virtualenv: `python3 -m venv <your virtualenv>`
+2. Activate your virtualenv: `source /path/to/your/virtualenv/bin/activate`
+3. Install Django and django-mama-cas:
+   ```
+   python -m pip install "django<3" "django-mama-cas==2.4.0"
+   ```
+4. Create a Django project in the current directory:
+   ```
+   django-admin startproject cas_test .
+   ```
+5. Follow the [install directions](https://django-mama-cas.readthedocs.io/en/latest/installation.html#configuring) for django-mama-cas
+6. Setup the SQLite database: `python manage.py migrate`
+7. Create a user:
+   ```
+   python manage.py createsuperuser
+   ```
+   1. Use whatever you want as the username and password.
+   2. Leave the other fields blank.
+8. Use the built-in Django test server to serve the CAS endpoints on port 8000:
+   ```
+   python manage.py runserver
+   ```
+
+You should now have a Django project configured to serve CAS authentication with
+a single user created.
+
+## Configure Synapse (and Riot) to use CAS
+
+1. Modify your `homeserver.yaml` to enable CAS and point it to your locally
+   running Django test server:
+   ```yaml
+   cas_config:
+     enabled: true
+     server_url: "http://localhost:8000"
+     service_url: "http://localhost:8081"
+     #displayname_attribute: name
+     #required_attributes:
+     #    name: value
+   ```
+2. Restart Synapse.
+
+Note that the above configuration assumes the homeserver is running on port 8081
+and that the CAS server is on port 8000, both on localhost.
+
+## Testing the configuration
+
+Then in Riot:
+
+1. Visit the login page with a Riot pointing at your homeserver.
+2. Click the Single Sign-On button.
+3. Login using the credentials created with `createsuperuser`.
+4. You should be logged in.
+
+If you want to repeat this process you'll need to manually logout first:
+
+1. http://localhost:8000/admin/
+2. Click "logout" in the top right.

docs/dev/git.md

@@ -0,0 +1,148 @@
+Some notes on how we use git
+============================
+
+On keeping the commit history clean
+-----------------------------------
+
+In an ideal world, our git commit history would be a linear progression of
+commits each of which contains a single change building on what came
+before. Here, by way of an arbitrary example, is the top of `git log --graph
+b2dba0607`:
+
+<img src="git/clean.png" alt="clean git graph" width="500px">
+
+Note how the commit comment explains clearly what is changing and why. Also
+note the *absence* of merge commits, as well as the absence of commits called
+things like (to pick a few culprits):
+[“pep8”](https://github.com/matrix-org/synapse/commit/84691da6c), [“fix broken
+test”](https://github.com/matrix-org/synapse/commit/474810d9d),
+[“oops”](https://github.com/matrix-org/synapse/commit/c9d72e457),
+[“typo”](https://github.com/matrix-org/synapse/commit/836358823), or [“Who's
+the president?”](https://github.com/matrix-org/synapse/commit/707374d5d).
+
+There are a number of reasons why keeping a clean commit history is a good
+thing:
+
+ * From time to time, after a change lands, it turns out to be necessary to
+   revert it, or to backport it to a release branch. Those operations are
+   *much* easier when the change is contained in a single commit.
+
+ * Similarly, it's much easier to answer questions like “is the fix for
+   `/publicRooms` on the release branch?” if that change consists of a single
+   commit.
+
+ * Likewise: “what has changed on this branch in the last week?” is much
+   clearer without merges and “pep8” commits everywhere.
+
+ * Sometimes we need to figure out where a bug got introduced, or some
+   behaviour changed. One way of doing that is with `git bisect`: pick an
+   arbitrary commit between the known good point and the known bad point, and
+   see how the code behaves. However, that strategy fails if the commit you
+   chose is the middle of someone's epic branch in which they broke the world
+   before putting it back together again.
+
+One counterargument is that it is sometimes useful to see how a PR evolved as
+it went through review cycles. This is true, but that information is always
+available via the GitHub UI (or via the little-known [refs/pull
+namespace](https://help.github.com/en/github/collaborating-with-issues-and-pull-requests/checking-out-pull-requests-locally)).
+
+
+Of course, in reality, things are more complicated than that. We have release
+branches as well as `develop` and `master`, and we deliberately merge changes
+between them. Bugs often slip through and have to be fixed later. That's all
+fine: this not a cast-iron rule which must be obeyed, but an ideal to aim
+towards.
+
+Merges, squashes, rebases: wtf?
+-------------------------------
+
+Ok, so that's what we'd like to achieve. How do we achieve it?
+
+The TL;DR is: when you come to merge a pull request, you *probably* want to
+“squash and merge”:
+
+![squash and merge](git/squash.png).
+
+(This applies whether you are merging your own PR, or that of another
+contributor.)
+
+“Squash and merge”<sup id="a1">[1](#f1)</sup> takes all of the changes in the
+PR, and bundles them into a single commit. GitHub gives you the opportunity to
+edit the commit message before you confirm, and normally you should do so,
+because the default will be useless (again: `* woops typo` is not a useful
+thing to keep in the historical record).
+
+The main problem with this approach comes when you have a series of pull
+requests which build on top of one another: as soon as you squash-merge the
+first PR, you'll end up with a stack of conflicts to resolve in all of the
+others. In general, it's best to avoid this situation in the first place by
+trying not to have multiple related PRs in flight at the same time. Still,
+sometimes that's not possible and doing a regular merge is the lesser evil.
+
+Another occasion in which a regular merge makes more sense is a PR where you've
+deliberately created a series of commits each of which makes sense in its own
+right. For example: [a PR which gradually propagates a refactoring operation
+through the codebase](https://github.com/matrix-org/synapse/pull/6837), or [a
+PR which is the culmination of several other
+PRs](https://github.com/matrix-org/synapse/pull/5987). In this case the ability
+to figure out when a particular change/bug was introduced could be very useful.
+
+Ultimately: **this is not a hard-and-fast-rule**. If in doubt, ask yourself “do
+each of the commits I am about to merge make sense in their own right”, but
+remember that we're just doing our best to balance “keeping the commit history
+clean” with other factors.
+
+Git branching model
+-------------------
+
+A [lot](https://nvie.com/posts/a-successful-git-branching-model/)
+[of](http://scottchacon.com/2011/08/31/github-flow.html)
+[words](https://www.endoflineblog.com/gitflow-considered-harmful) have been
+written in the past about git branching models (no really, [a
+lot](https://martinfowler.com/articles/branching-patterns.html)). I tend to
+think the whole thing is overblown. Fundamentally, it's not that
+complicated. Here's how we do it.
+
+Let's start with a picture:
+
+![branching model](git/branches.jpg)
+
+It looks complicated, but it's really not. There's one basic rule: *anyone* is
+free to merge from *any* more-stable branch to *any* less-stable branch at
+*any* time<sup id="a2">[2](#f2)</sup>. (The principle behind this is that if a
+change is good enough for the more-stable branch, then it's also good enough go
+put in a less-stable branch.)
+
+Meanwhile, merging (or squashing, as per the above) from a less-stable to a
+more-stable branch is a deliberate action in which you want to publish a change
+or a set of changes to (some subset of) the world: for example, this happens
+when a PR is landed, or as part of our release process.
+
+So, what counts as a more- or less-stable branch? A little reflection will show
+that our active branches are ordered thus, from more-stable to less-stable:
+
+ * `master` (tracks our last release).
+ * `release-vX.Y.Z` (the branch where we prepare the next release)<sup
+   id="a3">[3](#f3)</sup>.
+ * PR branches which are targeting the release.
+ * `develop` (our "mainline" branch containing our bleeding-edge).
+ * regular PR branches.
+
+The corollary is: if you have a bugfix that needs to land in both
+`release-vX.Y.Z` *and* `develop`, then you should base your PR on
+`release-vX.Y.Z`, get it merged there, and then merge from `release-vX.Y.Z` to
+`develop`. (If a fix lands in `develop` and we later need it in a
+release-branch, we can of course cherry-pick it, but landing it in the release
+branch first helps reduce the chance of annoying conflicts.)
+
+---
+
+<b id="f1">[1]</b>: “Squash and merge” is GitHub's term for this
+operation. Given that there is no merge involved, I'm not convinced it's the
+most intuitive name. [^](#a1)
+
+<b id="f2">[2]</b>: Well, anyone with commit access.[^](#a2)
+
+<b id="f3">[3]</b>: Very, very occasionally (I think this has happened once in
+the history of Synapse), we've had two releases in flight at once. Obviously,
+`release-v1.2.3` is more-stable than `release-v1.3.0`. [^](#a3)

docs/dev/saml.md

@@ -18,9 +18,13 @@ To make Synapse (and therefore Riot) use it:
        metadata:
          local: ["samling.xml"]   
    ```
-5. Run `apt-get install xmlsec1` and `pip install --upgrade --force 'pysaml2>=4.5.0'` to ensure
+5. Ensure that your `homeserver.yaml` has a setting for `public_baseurl`:
+   ```yaml
+   public_baseurl: http://localhost:8080/
+   ```
+6. Run `apt-get install xmlsec1` and `pip install --upgrade --force 'pysaml2>=4.5.0'` to ensure
    the dependencies are installed and ready to go.
-6. Restart Synapse.
+7. Restart Synapse.
 
 Then in Riot:
 

docs/federate.md

@@ -1,163 +1,41 @@
-Setting up Federation
+Setting up federation
 =====================
 
 Federation is the process by which users on different servers can participate
 in the same room. For this to work, those other servers must be able to contact
 yours to send messages.
 
-The ``server_name`` configured in the Synapse configuration file (often
-``homeserver.yaml``) defines how resources (users, rooms, etc.) will be
-identified (eg: ``@user:example.com``, ``#room:example.com``). By
-default, it is also the domain that other servers will use to
-try to reach your server (via port 8448). This is easy to set
-up and will work provided you set the ``server_name`` to match your
-machine's public DNS hostname, and provide Synapse with a TLS certificate
-which is valid for your ``server_name``.
+The `server_name` configured in the Synapse configuration file (often
+`homeserver.yaml`) defines how resources (users, rooms, etc.) will be
+identified (eg: `@user:example.com`, `#room:example.com`). By default,
+it is also the domain that other servers will use to try to reach your
+server (via port 8448). This is easy to set up and will work provided
+you set the `server_name` to match your machine's public DNS hostname.
+
+For this default configuration to work, you will need to listen for TLS
+connections on port 8448. The preferred way to do that is by using a
+reverse proxy: see [reverse_proxy.md](<reverse_proxy.md>) for instructions
+on how to correctly set one up.
+
+In some cases you might not want to run Synapse on the machine that has
+the `server_name` as its public DNS hostname, or you might want federation
+traffic to use a different port than 8448. For example, you might want to
+have your user names look like `@user:example.com`, but you want to run
+Synapse on `synapse.example.com` on port 443. This can be done using
+delegation, which allows an admin to control where federation traffic should
+be sent. See [delegate.md](delegate.md) for instructions on how to set this up.
 
 Once federation has been configured, you should be able to join a room over
-federation. A good place to start is ``#synapse:matrix.org`` - a room for
+federation. A good place to start is `#synapse:matrix.org` - a room for
 Synapse admins.
 
-
-## Delegation
-
-For a more flexible configuration, you can have ``server_name``
-resources (eg: ``@user:example.com``) served by a different host and
-port (eg: ``synapse.example.com:443``). There are two ways to do this:
-
-- adding a ``/.well-known/matrix/server`` URL served on ``https://example.com``.
-- adding a DNS ``SRV`` record in the DNS zone of domain
-  ``example.com``.
-
-Without configuring delegation, the matrix federation will
-expect to find your server via ``example.com:8448``. The following methods
-allow you retain a `server_name` of `example.com` so that your user IDs, room
-aliases, etc continue to look like `*:example.com`, whilst having your
-federation traffic routed to a different server.
-
-### .well-known delegation
-
-To use this method, you need to be able to alter the
-``server_name`` 's https server to serve the ``/.well-known/matrix/server``
-URL. Having an active server (with a valid TLS certificate) serving your
-``server_name`` domain is out of the scope of this documentation.
-
-The URL ``https://<server_name>/.well-known/matrix/server`` should
-return a JSON structure containing the key ``m.server`` like so:
-
-    {
-	    "m.server": "<synapse.server.name>[:<yourport>]"
-    }
-
-In our example, this would mean that URL ``https://example.com/.well-known/matrix/server``
-should return:
-
-    {
-	    "m.server": "synapse.example.com:443"
-    }
-
-Note, specifying a port is optional. If a port is not specified an SRV lookup
-is performed, as described below. If the target of the
-delegation does not have an SRV record, then the port defaults to 8448.
-
-Most installations will not need to configure .well-known. However, it can be
-useful in cases where the admin is hosting on behalf of someone else and
-therefore cannot gain access to the necessary certificate. With .well-known,
-federation servers will check for a valid TLS certificate for the delegated
-hostname (in our example: ``synapse.example.com``).
-
-### DNS SRV delegation
-
-To use this delegation method, you need to have write access to your
-``server_name`` 's domain zone DNS records (in our example it would be
-``example.com`` DNS zone).
-
-This method requires the target server to provide a
-valid TLS certificate for the original ``server_name``.
-
-You need to add a SRV record in your ``server_name`` 's DNS zone with
-this format:
-
-     _matrix._tcp.<yourdomain.com> <ttl> IN SRV <priority> <weight> <port> <synapse.server.name>
-
-In our example, we would need to add this SRV record in the
-``example.com`` DNS zone:
-
-     _matrix._tcp.example.com. 3600 IN SRV 10 5 443 synapse.example.com.
-
-Once done and set up, you can check the DNS record with ``dig -t srv
-_matrix._tcp.<server_name>``. In our example, we would expect this:
-
-    $ dig -t srv _matrix._tcp.example.com
-    _matrix._tcp.example.com. 3600    IN      SRV     10 0 443 synapse.example.com.
-
-Note that the target of a SRV record cannot be an alias (CNAME record): it has to point
-directly to the server hosting the synapse instance.
-
-### Delegation FAQ
-#### When do I need a SRV record or .well-known URI?
-
-If your homeserver listens on the default federation port (8448), and your
-`server_name` points to the host that your homeserver runs on, you do not need an SRV
-record or `.well-known/matrix/server` URI.
-
-For instance, if you registered `example.com` and pointed its DNS A record at a
-fresh server, you could install Synapse on that host,
-giving it a `server_name` of `example.com`, and once [ACME](acme.md) support is enabled,
-it would automatically generate a valid TLS certificate for you via Let's Encrypt
-and no SRV record or .well-known URI would be needed.
-
-**However**, if your server does not listen on port 8448, or if your `server_name`
-does not point to the host that your homeserver runs on, you will need to let
-other servers know how to find it. The way to do this is via .well-known or an
-SRV record.
-
-#### I have created a .well-known URI. Do I also need an SRV record?
-
-No. You can use either `.well-known` delegation or use an SRV record for delegation. You
-do not need to use both to delegate to the same location.
-
-#### Can I manage my own certificates rather than having Synapse renew certificates itself?
-
-Yes, you are welcome to manage your certificates yourself. Synapse will only
-attempt to obtain certificates from Let's Encrypt if you configure it to do
-so.The only requirement is that there is a valid TLS cert present for
-federation end points.
-
-#### Do you still recommend against using a reverse proxy on the federation port?
-
-We no longer actively recommend against using a reverse proxy. Many admins will
-find it easier to direct federation traffic to a reverse proxy and manage their
-own TLS certificates, and this is a supported configuration.
-
-See [reverse_proxy.md](reverse_proxy.md) for information on setting up a
-reverse proxy.
-
-#### Do I still need to give my TLS certificates to Synapse if I am using a reverse proxy?
-
-Practically speaking, this is no longer necessary.
-
-If you are using a reverse proxy for all of your TLS traffic, then you can set
-`no_tls: True` in the Synapse config. In that case, the only reason Synapse
-needs the certificate is to populate a legacy `tls_fingerprints` field in the
-federation API. This is ignored by Synapse 0.99.0 and later, and the only time
-pre-0.99 Synapses will check it is when attempting to fetch the server keys -
-and generally this is delegated via `matrix.org`, which will be running a modern
-version of Synapse.
-
-#### Do I need the same certificate for the client and federation port?
-
-No. There is nothing stopping you from using different certificates,
-particularly if you are using a reverse proxy. However, Synapse will use the
-same certificate on any ports where TLS is configured.
-
 ## Troubleshooting
 
-You can use the [federation tester](
-<https://matrix.org/federationtester>) to check if your homeserver is
-configured correctly. Alternatively try the [JSON API used by the federation tester](https://matrix.org/federationtester/api/report?server_name=DOMAIN).
-Note that you'll have to modify this URL to replace ``DOMAIN`` with your
-``server_name``. Hitting the API directly provides extra detail.
+You can use the [federation tester](https://matrix.org/federationtester)
+to check if your homeserver is configured correctly. Alternatively try the
+[JSON API used by the federation tester](https://matrix.org/federationtester/api/report?server_name=DOMAIN).
+Note that you'll have to modify this URL to replace `DOMAIN` with your
+`server_name`. Hitting the API directly provides extra detail.
 
 The typical failure mode for federation is that when the server tries to join
 a room, it is rejected with "401: Unauthorized". Generally this means that other
@@ -169,8 +47,8 @@ you invite them to. This can be caused by an incorrectly-configured reverse
 proxy: see [reverse_proxy.md](<reverse_proxy.md>) for instructions on how to correctly
 configure a reverse proxy.
 
-## Running a Demo Federation of Synapses
+## Running a demo federation of Synapses
 
 If you want to get up and running quickly with a trio of homeservers in a
-private federation, there is a script in the ``demo`` directory. This is mainly
+private federation, there is a script in the `demo` directory. This is mainly
 useful just for development purposes. See [demo/README](<../demo/README>).

docs/log_contexts.md

@@ -29,14 +29,13 @@ from synapse.logging import context         # omitted from future snippets
 def handle_request(request_id):
     request_context = context.LoggingContext()
 
-    calling_context = context.LoggingContext.current_context()
-    context.LoggingContext.set_current_context(request_context)
+    calling_context = context.set_current_context(request_context)
     try:
         request_context.request = request_id
         do_request_handling()
         logger.debug("finished")
     finally:
-        context.LoggingContext.set_current_context(calling_context)
+        context.set_current_context(calling_context)
 
 def do_request_handling():
     logger.debug("phew")  # this will be logged against request_id

docs/message_retention_policies.md

@@ -0,0 +1,195 @@
+# Message retention policies
+
+Synapse admins can enable support for message retention policies on
+their homeserver. Message retention policies exist at a room level,
+follow the semantics described in
+[MSC1763](https://github.com/matrix-org/matrix-doc/blob/matthew/msc1763/proposals/1763-configurable-retention-periods.md),
+and allow server and room admins to configure how long messages should
+be kept in a homeserver's database before being purged from it.
+**Please note that, as this feature isn't part of the Matrix
+specification yet, this implementation is to be considered as
+experimental.** 
+
+A message retention policy is mainly defined by its `max_lifetime`
+parameter, which defines how long a message can be kept around after
+it was sent to the room. If a room doesn't have a message retention
+policy, and there's no default one for a given server, then no message
+sent in that room is ever purged on that server.
+
+MSC1763 also specifies semantics for a `min_lifetime` parameter which
+defines the amount of time after which an event _can_ get purged (after
+it was sent to the room), but Synapse doesn't currently support it
+beyond registering it.
+
+Both `max_lifetime` and `min_lifetime` are optional parameters.
+
+Note that message retention policies don't apply to state events.
+
+Once an event reaches its expiry date (defined as the time it was sent
+plus the value for `max_lifetime` in the room), two things happen:
+
+* Synapse stops serving the event to clients via any endpoint.
+* The message gets picked up by the next purge job (see the "Purge jobs"
+  section) and is removed from Synapse's database.
+
+Since purge jobs don't run continuously, this means that an event might
+stay in a server's database for longer than the value for `max_lifetime`
+in the room would allow, though hidden from clients.
+
+Similarly, if a server (with support for message retention policies
+enabled) receives from another server an event that should have been
+purged according to its room's policy, then the receiving server will
+process and store that event until it's picked up by the next purge job,
+though it will always hide it from clients.
+
+Synapse requires at least one message in each room, so it will never
+delete the last message in a room. It will, however, hide it from
+clients.
+
+
+## Server configuration
+
+Support for this feature can be enabled and configured in the
+`retention` section of the Synapse configuration file (see the
+[sample file](https://github.com/matrix-org/synapse/blob/v1.7.3/docs/sample_config.yaml#L332-L393)).
+
+To enable support for message retention policies, set the setting
+`enabled` in this section to `true`.
+
+
+### Default policy
+
+A default message retention policy is a policy defined in Synapse's
+configuration that is used by Synapse for every room that doesn't have a
+message retention policy configured in its state. This allows server
+admins to ensure that messages are never kept indefinitely in a server's
+database. 
+
+A default policy can be defined as such, in the `retention` section of
+the configuration file:
+
+```yaml
+  default_policy:
+    min_lifetime: 1d
+    max_lifetime: 1y
+```
+
+Here, `min_lifetime` and `max_lifetime` have the same meaning and level
+of support as previously described. They can be expressed either as a
+duration (using the units `s` (seconds), `m` (minutes), `h` (hours),
+`d` (days), `w` (weeks) and `y` (years)) or as a number of milliseconds.
+
+
+### Purge jobs
+
+Purge jobs are the jobs that Synapse runs in the background to purge
+expired events from the database. They are only run if support for
+message retention policies is enabled in the server's configuration. If
+no configuration for purge jobs is configured by the server admin,
+Synapse will use a default configuration, which is described in the
+[sample configuration file](https://github.com/matrix-org/synapse/blob/master/docs/sample_config.yaml#L332-L393).
+
+Some server admins might want a finer control on when events are removed
+depending on an event's room's policy. This can be done by setting the
+`purge_jobs` sub-section in the `retention` section of the configuration
+file. An example of such configuration could be:
+
+```yaml
+  purge_jobs:
+    - longest_max_lifetime: 3d
+      interval: 12h
+    - shortest_max_lifetime: 3d
+      longest_max_lifetime: 1w
+      interval: 1d
+    - shortest_max_lifetime: 1w
+      interval: 2d
+```
+
+In this example, we define three jobs:
+
+* one that runs twice a day (every 12 hours) and purges events in rooms
+  which policy's `max_lifetime` is lower or equal to 3 days.
+* one that runs once a day and purges events in rooms which policy's
+  `max_lifetime` is between 3 days and a week.
+* one that runs once every 2 days and purges events in rooms which
+  policy's `max_lifetime` is greater than a week.
+
+Note that this example is tailored to show different configurations and
+features slightly more jobs than it's probably necessary (in practice, a
+server admin would probably consider it better to replace the two last
+jobs with one that runs once a day and handles rooms which which
+policy's `max_lifetime` is greater than 3 days).
+
+Keep in mind, when configuring these jobs, that a purge job can become
+quite heavy on the server if it targets many rooms, therefore prefer
+having jobs with a low interval that target a limited set of rooms. Also
+make sure to include a job with no minimum and one with no maximum to
+make sure your configuration handles every policy.
+
+As previously mentioned in this documentation, while a purge job that
+runs e.g. every day means that an expired event might stay in the
+database for up to a day after its expiry, Synapse hides expired events
+from clients as soon as they expire, so the event is not visible to
+local users between its expiry date and the moment it gets purged from
+the server's database.
+
+
+### Lifetime limits
+
+**Note: this feature is mainly useful within a closed federation or on
+servers that don't federate, because there currently is no way to
+enforce these limits in an open federation.**
+
+Server admins can restrict the values their local users are allowed to
+use for both `min_lifetime` and `max_lifetime`. These limits can be
+defined as such in the `retention` section of the configuration file:
+
+```yaml
+  allowed_lifetime_min: 1d
+  allowed_lifetime_max: 1y
+```
+
+Here, `allowed_lifetime_min` is the lowest value a local user can set
+for both `min_lifetime` and `max_lifetime`, and `allowed_lifetime_max`
+is the highest value. Both parameters are optional (e.g. setting
+`allowed_lifetime_min` but not `allowed_lifetime_max` only enforces a
+minimum and no maximum).
+
+Like other settings in this section, these parameters can be expressed
+either as a duration or as a number of milliseconds.
+
+
+## Room configuration
+
+To configure a room's message retention policy, a room's admin or
+moderator needs to send a state event in that room with the type
+`m.room.retention` and the following content:
+
+```json
+{
+    "max_lifetime": ...
+}
+```
+
+In this event's content, the `max_lifetime` parameter has the same
+meaning as previously described, and needs to be expressed in
+milliseconds. The event's content can also include a `min_lifetime`
+parameter, which has the same meaning and limited support as previously
+described.
+
+Note that over every server in the room, only the ones with support for
+message retention policies will actually remove expired events. This
+support is currently not enabled by default in Synapse.
+
+
+## Note on reclaiming disk space
+
+While purge jobs actually delete data from the database, the disk space
+used by the database might not decrease immediately on the database's
+host. However, even though the database engine won't free up the disk
+space, it will start writing new data into where the purged data was.
+
+If you want to reclaim the freed disk space anyway and return it to the
+operating system, the server admin needs to run `VACUUM FULL;` (or
+`VACUUM;` for SQLite databases) on Synapse's database (see the related
+[PostgreSQL documentation](https://www.postgresql.org/docs/current/sql-vacuum.html)).

docs/metrics-howto.md

@@ -60,6 +60,31 @@
 
 1.  Restart Prometheus.
 
+## Monitoring workers
+
+To monitor a Synapse installation using
+[workers](https://github.com/matrix-org/synapse/blob/master/docs/workers.md),
+every worker needs to be monitored independently, in addition to
+the main homeserver process. This is because workers don't send
+their metrics to the main homeserver process, but expose them
+directly (if they are configured to do so).
+
+To allow collecting metrics from a worker, you need to add a
+`metrics` listener to its configuration, by adding the following
+under `worker_listeners`:
+
+```yaml
+ - type: metrics
+   bind_address: ''
+   port: 9101
+```
+
+The `bind_address` and `port` parameters should be set so that
+the resulting listener can be reached by prometheus, and they
+don't clash with an existing worker.
+With this example, the worker's metrics would then be available
+on `http://127.0.0.1:9101`.
+
 ## Renaming of metrics & deprecation of old names in 1.2
 
 Synapse 1.2 updates the Prometheus metrics to match the naming

docs/openid.md

@@ -0,0 +1,250 @@
+# Configuring Synapse to authenticate against an OpenID Connect provider
+
+Synapse can be configured to use an OpenID Connect Provider (OP) for
+authentication, instead of its own local password database.
+
+Any OP should work with Synapse, as long as it supports the authorization code
+flow. There are a few options for that:
+
+ - start a local OP. Synapse has been tested with [Hydra][hydra] and
+   [Dex][dex-idp].  Note that for an OP to work, it should be served under a
+   secure (HTTPS) origin.  A certificate signed with a self-signed, locally
+   trusted CA should work. In that case, start Synapse with a `SSL_CERT_FILE`
+   environment variable set to the path of the CA.
+
+ - set up a SaaS OP, like [Google][google-idp], [Auth0][auth0] or
+   [Okta][okta]. Synapse has been tested with Auth0 and Google.
+
+It may also be possible to use other OAuth2 providers which provide the
+[authorization code grant type](https://tools.ietf.org/html/rfc6749#section-4.1),
+such as [Github][github-idp].
+
+[google-idp]: https://developers.google.com/identity/protocols/oauth2/openid-connect
+[auth0]: https://auth0.com/
+[okta]: https://www.okta.com/
+[dex-idp]: https://github.com/dexidp/dex
+[keycloak-idp]: https://www.keycloak.org/docs/latest/server_admin/#sso-protocols
+[hydra]: https://www.ory.sh/docs/hydra/
+[github-idp]: https://developer.github.com/apps/building-oauth-apps/authorizing-oauth-apps
+
+## Preparing Synapse
+
+The OpenID integration in Synapse uses the
+[`authlib`](https://pypi.org/project/Authlib/) library, which must be installed
+as follows:
+
+ * The relevant libraries are included in the Docker images and Debian packages
+   provided by `matrix.org` so no further action is needed.
+
+ * If you installed Synapse into a virtualenv, run `/path/to/env/bin/pip
+   install synapse[oidc]` to install the necessary dependencies.
+
+ * For other installation mechanisms, see the documentation provided by the
+   maintainer.
+
+To enable the OpenID integration, you should then add an `oidc_config` section
+to your configuration file (or uncomment the `enabled: true` line in the
+existing section). See [sample_config.yaml](./sample_config.yaml) for some
+sample settings, as well as the text below for example configurations for
+specific providers.
+
+## Sample configs
+
+Here are a few configs for providers that should work with Synapse.
+
+### [Dex][dex-idp]
+
+[Dex][dex-idp] is a simple, open-source, certified OpenID Connect Provider.
+Although it is designed to help building a full-blown provider with an
+external database, it can be configured with static passwords in a config file.
+
+Follow the [Getting Started
+guide](https://github.com/dexidp/dex/blob/master/Documentation/getting-started.md)
+to install Dex.
+
+Edit `examples/config-dev.yaml` config file from the Dex repo to add a client:
+
+```yaml
+staticClients:
+- id: synapse
+  secret: secret
+  redirectURIs:
+  - '[synapse public baseurl]/_synapse/oidc/callback'
+  name: 'Synapse'
+```
+
+Run with `dex serve examples/config-dex.yaml`.
+
+Synapse config:
+
+```yaml
+oidc_config:
+   enabled: true
+   skip_verification: true # This is needed as Dex is served on an insecure endpoint
+   issuer: "http://127.0.0.1:5556/dex"
+   client_id: "synapse"
+   client_secret: "secret"
+   scopes: ["openid", "profile"]
+   user_mapping_provider:
+     config:
+       localpart_template: "{{ user.name }}"
+       display_name_template: "{{ user.name|capitalize }}"
+```
+### [Keycloak][keycloak-idp]
+
+[Keycloak][keycloak-idp] is an opensource IdP maintained by Red Hat. 
+
+Follow the [Getting Started Guide](https://www.keycloak.org/getting-started) to install Keycloak and set up a realm.
+
+1. Click `Clients` in the sidebar and click `Create`
+
+2. Fill in the fields as below:
+
+| Field | Value |
+|-----------|-----------|
+| Client ID | `synapse` |
+| Client Protocol | `openid-connect` |
+
+3. Click `Save`
+4. Fill in the fields as below:
+
+| Field | Value |
+|-----------|-----------|
+| Client ID | `synapse` |
+| Enabled | `On` |
+| Client Protocol | `openid-connect` |
+| Access Type | `confidential` |
+| Valid Redirect URIs | `[synapse public baseurl]/_synapse/oidc/callback` |
+
+5. Click `Save`
+6. On the Credentials tab, update the fields:
+
+| Field | Value |
+|-------|-------|
+| Client Authenticator | `Client ID and Secret` |
+
+7. Click `Regenerate Secret`
+8. Copy Secret
+
+```yaml
+oidc_config:
+   enabled: true
+   issuer: "https://127.0.0.1:8443/auth/realms/{realm_name}"
+   client_id: "synapse"
+   client_secret: "copy secret generated from above"
+   scopes: ["openid", "profile"]
+```
+### [Auth0][auth0]
+
+1. Create a regular web application for Synapse
+2. Set the Allowed Callback URLs to `[synapse public baseurl]/_synapse/oidc/callback`
+3. Add a rule to add the `preferred_username` claim.
+   <details>
+    <summary>Code sample</summary>
+
+    ```js
+    function addPersistenceAttribute(user, context, callback) {
+      user.user_metadata = user.user_metadata || {};
+      user.user_metadata.preferred_username = user.user_metadata.preferred_username || user.user_id;
+      context.idToken.preferred_username = user.user_metadata.preferred_username;
+
+      auth0.users.updateUserMetadata(user.user_id, user.user_metadata)
+        .then(function(){
+            callback(null, user, context);
+        })
+        .catch(function(err){
+            callback(err);
+        });
+    }
+    ```
+  </details>
+
+Synapse config:
+
+```yaml
+oidc_config:
+   enabled: true
+   issuer: "https://your-tier.eu.auth0.com/" # TO BE FILLED
+   client_id: "your-client-id" # TO BE FILLED
+   client_secret: "your-client-secret" # TO BE FILLED
+   scopes: ["openid", "profile"]
+   user_mapping_provider:
+     config:
+       localpart_template: "{{ user.preferred_username }}"
+       display_name_template: "{{ user.name }}"
+```
+
+### GitHub
+
+GitHub is a bit special as it is not an OpenID Connect compliant provider, but
+just a regular OAuth2 provider.
+
+The [`/user` API endpoint](https://developer.github.com/v3/users/#get-the-authenticated-user)
+can be used to retrieve information on the authenticated user. As the Synaspse
+login mechanism needs an attribute to uniquely identify users, and that endpoint
+does not return a `sub` property, an alternative `subject_claim` has to be set.
+
+1. Create a new OAuth application: https://github.com/settings/applications/new.
+2. Set the callback URL to `[synapse public baseurl]/_synapse/oidc/callback`.
+
+Synapse config:
+
+```yaml
+oidc_config:
+   enabled: true
+   discover: false
+   issuer: "https://github.com/"
+   client_id: "your-client-id" # TO BE FILLED
+   client_secret: "your-client-secret" # TO BE FILLED
+   authorization_endpoint: "https://github.com/login/oauth/authorize"
+   token_endpoint: "https://github.com/login/oauth/access_token"
+   userinfo_endpoint: "https://api.github.com/user"
+   scopes: ["read:user"]
+   user_mapping_provider:
+     config:
+       subject_claim: "id"
+       localpart_template: "{{ user.login }}"
+       display_name_template: "{{ user.name }}"
+```
+
+### [Google][google-idp]
+
+1. Set up a project in the Google API Console (see
+   https://developers.google.com/identity/protocols/oauth2/openid-connect#appsetup).
+2. add an "OAuth Client ID" for a Web Application under "Credentials".
+3. Copy the Client ID and Client Secret, and add the following to your synapse config:
+   ```yaml
+   oidc_config:
+     enabled: true
+     issuer: "https://accounts.google.com/"
+     client_id: "your-client-id" # TO BE FILLED
+     client_secret: "your-client-secret" # TO BE FILLED
+     scopes: ["openid", "profile"]
+     user_mapping_provider:
+       config:
+         localpart_template: "{{ user.given_name|lower }}"
+         display_name_template: "{{ user.name }}"
+   ```
+4. Back in the Google console, add this Authorized redirect URI: `[synapse
+   public baseurl]/_synapse/oidc/callback`.
+
+### Twitch
+
+1. Setup a developer account on [Twitch](https://dev.twitch.tv/)
+2. Obtain the OAuth 2.0 credentials by [creating an app](https://dev.twitch.tv/console/apps/)
+3. Add this OAuth Redirect URL: `[synapse public baseurl]/_synapse/oidc/callback`
+
+Synapse config:
+
+```yaml
+oidc_config:
+   enabled: true
+   issuer: "https://id.twitch.tv/oauth2/"
+   client_id: "your-client-id" # TO BE FILLED
+   client_secret: "your-client-secret" # TO BE FILLED
+   client_auth_method: "client_secret_post"
+   user_mapping_provider:
+     config:
+       localpart_template: '{{ user.preferred_username }}'
+       display_name_template: '{{ user.name }}'
+```

docs/password_auth_providers.md

@@ -9,7 +9,11 @@ into Synapse, and provides a number of methods by which it can integrate
 with the authentication system.
 
 This document serves as a reference for those looking to implement their
-own password auth providers.
+own password auth providers. Additionally, here is a list of known
+password auth provider module implementations:
+
+* [matrix-synapse-ldap3](https://github.com/matrix-org/matrix-synapse-ldap3/)
+* [matrix-synapse-shared-secret-auth](https://github.com/devture/matrix-synapse-shared-secret-auth)
 
 ## Required methods
 

docs/postgres.md

@@ -32,7 +32,7 @@ Assuming your PostgreSQL database user is called `postgres`, first authenticate
     su - postgres
     # Or, if your system uses sudo to get administrative rights
     sudo -u postgres bash
-  
+
 Then, create a user ``synapse_user`` with:
 
     createuser --pwprompt synapse_user
@@ -61,7 +61,50 @@ Note that the PostgreSQL database *must* have the correct encoding set
 
 You may need to enable password authentication so `synapse_user` can
 connect to the database. See
-<https://www.postgresql.org/docs/11/auth-pg-hba-conf.html>.
+<https://www.postgresql.org/docs/current/auth-pg-hba-conf.html>.
+
+If you get an error along the lines of `FATAL:  Ident authentication failed for
+user "synapse_user"`, you may need to use an authentication method other than
+`ident`:
+
+* If the `synapse_user` user has a password, add the password to the `database:`
+  section of `homeserver.yaml`. Then add the following to `pg_hba.conf`:
+
+  ```
+  host    synapse     synapse_user    ::1/128     md5  # or `scram-sha-256` instead of `md5` if you use that
+  ```
+
+* If the `synapse_user` user does not have a password, then a password doesn't
+  have to be added to `homeserver.yaml`. But the following does need to be added
+  to `pg_hba.conf`:
+
+  ```
+  host    synapse     synapse_user    ::1/128     trust
+  ```
+
+Note that line order matters in `pg_hba.conf`, so make sure that if you do add a
+new line, it is inserted before:
+
+```
+host    all         all             ::1/128     ident
+```
+
+### Fixing incorrect `COLLATE` or `CTYPE`
+
+Synapse will refuse to set up a new database if it has the wrong values of
+`COLLATE` and `CTYPE` set, and will log warnings on existing databases. Using
+different locales can cause issues if the locale library is updated from
+underneath the database, or if a different version of the locale is used on any
+replicas.
+
+The safest way to fix the issue is to take a dump and recreate the database with
+the correct `COLLATE` and `CTYPE` parameters (as shown above). It is also possible to change the
+parameters on a live database and run a `REINDEX` on the entire database,
+however extreme care must be taken to avoid database corruption.
+
+Note that the above may fail with an error about duplicate rows if corruption
+has already occurred, and such duplicate rows will need to be manually removed.
+
 
 ## Tuning Postgres
 
@@ -87,19 +130,41 @@ of free memory the database host has available.
 When you are ready to start using PostgreSQL, edit the `database`
 section in your config file to match the following lines:
 
-    database:
-        name: psycopg2
-        args:
-            user: <user>
-            password: <pass>
-            database: <db>
-            host: <host>
-            cp_min: 5
-            cp_max: 10
+```yaml
+database:
+  name: psycopg2
+  args:
+    user: <user>
+    password: <pass>
+    database: <db>
+    host: <host>
+    cp_min: 5
+    cp_max: 10
+```
 
 All key, values in `args` are passed to the `psycopg2.connect(..)`
 function, except keys beginning with `cp_`, which are consumed by the
-twisted adbapi connection pool.
+twisted adbapi connection pool. See the [libpq
+documentation](https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-PARAMKEYWORDS)
+for a list of options which can be passed.
+
+You should consider tuning the `args.keepalives_*` options if there is any danger of
+the connection between your homeserver and database dropping, otherwise Synapse
+may block for an extended period while it waits for a response from the
+database server. Example values might be:
+
+```yaml
+# seconds of inactivity after which TCP should send a keepalive message to the server
+keepalives_idle: 10
+
+# the number of seconds after which a TCP keepalive message that is not
+# acknowledged by the server should be retransmitted
+keepalives_interval: 10
+
+# the number of TCP keepalives that can be lost before the client's connection
+# to the server is considered dead
+keepalives_count: 3
+```
 
 ## Porting from SQLite
 

docs/reverse_proxy.md

@@ -9,7 +9,7 @@ of doing so is that it means that you can expose the default https port
 (443) to Matrix clients without needing to run Synapse with root
 privileges.
 
-> **NOTE**: Your reverse proxy must not `canonicalise` or `normalise`
+**NOTE**: Your reverse proxy must not `canonicalise` or `normalise`
 the requested URI in any way (for example, by decoding `%xx` escapes).
 Beware that Apache *will* canonicalise URIs unless you specifify
 `nocanon`.
@@ -18,99 +18,123 @@ When setting up a reverse proxy, remember that Matrix clients and other
 Matrix servers do not necessarily need to connect to your server via the
 same server name or port. Indeed, clients will use port 443 by default,
 whereas servers default to port 8448. Where these are different, we
-refer to the 'client port' and the \'federation port\'. See [Setting
-up federation](federate.md) for more details of the algorithm used for
-federation connections.
+refer to the 'client port' and the 'federation port'. See [the Matrix
+specification](https://matrix.org/docs/spec/server_server/latest#resolving-server-names)
+for more details of the algorithm used for federation connections, and
+[delegate.md](<delegate.md>) for instructions on setting up delegation.
 
 Let's assume that we expect clients to connect to our server at
 `https://matrix.example.com`, and other servers to connect at
 `https://example.com:8448`.  The following sections detail the configuration of
 the reverse proxy and the homeserver.
 
-## Webserver configuration examples
+## Reverse-proxy configuration examples
 
-> **NOTE**: You only need one of these.
+**NOTE**: You only need one of these.
 
 ### nginx
 
-        server {
-            listen 443 ssl;
-            listen [::]:443 ssl;
-            server_name matrix.example.com;
+```
+server {
+    listen 443 ssl;
+    listen [::]:443 ssl;
+    server_name matrix.example.com;
 
-            location /_matrix {
-                proxy_pass http://localhost:8008;
-                proxy_set_header X-Forwarded-For $remote_addr;
-            }
-        }
+    location /_matrix {
+        proxy_pass http://localhost:8008;
+        proxy_set_header X-Forwarded-For $remote_addr;
+        # Nginx by default only allows file uploads up to 1M in size
+        # Increase client_max_body_size to match max_upload_size defined in homeserver.yaml
+        client_max_body_size 10M;
+    }
+}
 
-        server {
-            listen 8448 ssl default_server;
-            listen [::]:8448 ssl default_server;
-            server_name example.com;
+server {
+    listen 8448 ssl default_server;
+    listen [::]:8448 ssl default_server;
+    server_name example.com;
 
-            location / {
-                proxy_pass http://localhost:8008;
-                proxy_set_header X-Forwarded-For $remote_addr;
-            }
-        }
+    location / {
+        proxy_pass http://localhost:8008;
+        proxy_set_header X-Forwarded-For $remote_addr;
+    }
+}
+```
 
-> **NOTE**: Do not add a `/` after the port in `proxy_pass`, otherwise nginx will
+**NOTE**: Do not add a path after the port in `proxy_pass`, otherwise nginx will
 canonicalise/normalise the URI.
 
-### Caddy
+### Caddy 1
 
-        matrix.example.com {
-          proxy /_matrix http://localhost:8008 {
-            transparent
-          }
-        }
+```
+matrix.example.com {
+  proxy /_matrix http://localhost:8008 {
+    transparent
+  }
+}
 
-        example.com:8448 {
-          proxy / http://localhost:8008 {
-            transparent
-          }
-        }
+example.com:8448 {
+  proxy / http://localhost:8008 {
+    transparent
+  }
+}
+```
+
+### Caddy 2
+
+```
+matrix.example.com {
+  reverse_proxy /_matrix/* http://localhost:8008
+}
+
+example.com:8448 {
+  reverse_proxy http://localhost:8008
+}
+```
 
 ### Apache
 
-        <VirtualHost *:443>
-            SSLEngine on
-            ServerName matrix.example.com;
+```
+<VirtualHost *:443>
+    SSLEngine on
+    ServerName matrix.example.com;
 
-            AllowEncodedSlashes NoDecode
-            ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
-            ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
-        </VirtualHost>
+    AllowEncodedSlashes NoDecode
+    ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
+    ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
+</VirtualHost>
 
-        <VirtualHost *:8448>
-            SSLEngine on
-            ServerName example.com;
+<VirtualHost *:8448>
+    SSLEngine on
+    ServerName example.com;
 
-            AllowEncodedSlashes NoDecode
-            ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
-            ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
-        </VirtualHost>
+    AllowEncodedSlashes NoDecode
+    ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
+    ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
+</VirtualHost>
+```
 
-> **NOTE**: ensure the  `nocanon` options are included.
+**NOTE**: ensure the  `nocanon` options are included.
 
 ### HAProxy
 
-        frontend https
-          bind :::443 v4v6 ssl crt /etc/ssl/haproxy/ strict-sni alpn h2,http/1.1
+```
+frontend https
+  bind :::443 v4v6 ssl crt /etc/ssl/haproxy/ strict-sni alpn h2,http/1.1
 
-          # Matrix client traffic
-          acl matrix-host hdr(host) -i matrix.example.com
-          acl matrix-path path_beg /_matrix
+  # Matrix client traffic
+  acl matrix-host hdr(host) -i matrix.example.com
+  acl matrix-path path_beg /_matrix
 
-          use_backend matrix if matrix-host matrix-path
+  use_backend matrix if matrix-host matrix-path
 
-        frontend matrix-federation
-          bind :::8448 v4v6 ssl crt /etc/ssl/haproxy/synapse.pem alpn h2,http/1.1
-          default_backend matrix
+frontend matrix-federation
+  bind :::8448 v4v6 ssl crt /etc/ssl/haproxy/synapse.pem alpn h2,http/1.1
+  default_backend matrix
 
-        backend matrix
-          server matrix 127.0.0.1:8008
+backend matrix
+  server matrix 127.0.0.1:8008
+```
 
 ## Homeserver Configuration
 

docs/saml_mapping_providers.md

@@ -1,77 +0,0 @@
-# SAML Mapping Providers
-
-A SAML mapping provider is a Python class (loaded via a Python module) that
-works out how to map attributes of a SAML response object to Matrix-specific
-user attributes. Details such as user ID localpart, displayname, and even avatar
-URLs are all things that can be mapped from talking to a SSO service.
-
-As an example, a SSO service may return the email address
-"john.smith@example.com" for a user, whereas Synapse will need to figure out how
-to turn that into a displayname when creating a Matrix user for this individual.
-It may choose `John Smith`, or `Smith, John [Example.com]` or any number of
-variations. As each Synapse configuration may want something different, this is
-where SAML mapping providers come into play.
-
-## Enabling Providers
-
-External mapping providers are provided to Synapse in the form of an external
-Python module. Retrieve this module from [PyPi](https://pypi.org) or elsewhere,
-then tell Synapse where to look for the handler class by editing the
-`saml2_config.user_mapping_provider.module` config option.
-
-`saml2_config.user_mapping_provider.config` allows you to provide custom
-configuration options to the module. Check with the module's documentation for
-what options it provides (if any). The options listed by default are for the
-user mapping provider built in to Synapse. If using a custom module, you should
-comment these options out and use those specified by the module instead.
-
-## Building a Custom Mapping Provider
-
-A custom mapping provider must specify the following methods:
-
-* `__init__(self, parsed_config)`
-   - Arguments:
-     - `parsed_config` - A configuration object that is the return value of the
-       `parse_config` method. You should set any configuration options needed by
-       the module here.
-* `saml_response_to_user_attributes(self, saml_response, failures)`
-    - Arguments:
-      - `saml_response` - A `saml2.response.AuthnResponse` object to extract user
-                          information from.
-      - `failures` - An `int` that represents the amount of times the returned
-                     mxid localpart mapping has failed.  This should be used
-                     to create a deduplicated mxid localpart which should be
-                     returned instead. For example, if this method returns
-                     `john.doe` as the value of `mxid_localpart` in the returned
-                     dict, and that is already taken on the homeserver, this
-                     method will be called again with the same parameters but
-                     with failures=1. The method should then return a different
-                     `mxid_localpart` value, such as `john.doe1`.
-    - This method must return a dictionary, which will then be used by Synapse
-      to build a new user. The following keys are allowed:
-       * `mxid_localpart` - Required. The mxid localpart of the new user.
-       * `displayname` - The displayname of the new user. If not provided, will default to
-                         the value of `mxid_localpart`.
-* `parse_config(config)`
-    - This method should have the `@staticmethod` decoration.
-    - Arguments:
-        - `config` - A `dict` representing the parsed content of the
-          `saml2_config.user_mapping_provider.config` homeserver config option.
-           Runs on homeserver startup. Providers should extract any option values
-           they need here.
-    - Whatever is returned will be passed back to the user mapping provider module's
-      `__init__` method during construction.
-* `get_saml_attributes(config)`
-    - This method should have the `@staticmethod` decoration.
-    - Arguments:
-        - `config` - A object resulting from a call to `parse_config`.
-    - Returns a tuple of two sets. The first set equates to the saml auth
-      response attributes that are required for the module to function, whereas
-      the second set consists of those attributes which can be used if available,
-      but are not necessary.
-
-## Synapse's Default Provider
-
-Synapse has a built-in SAML mapping provider if a custom provider isn't
-specified in the config. It is located at
-[`synapse.handlers.saml_handler.DefaultSamlMappingProvider`](../synapse/handlers/saml_handler.py).

docs/spam_checker.md

@@ -0,0 +1,93 @@
+# Handling spam in Synapse
+
+Synapse has support to customize spam checking behavior. It can plug into a
+variety of events and affect how they are presented to users on your homeserver.
+
+The spam checking behavior is implemented as a Python class, which must be
+able to be imported by the running Synapse.
+
+## Python spam checker class
+
+The Python class is instantiated with two objects:
+
+* Any configuration (see below).
+* An instance of `synapse.spam_checker_api.SpamCheckerApi`.
+
+It then implements methods which return a boolean to alter behavior in Synapse.
+
+There's a generic method for checking every event (`check_event_for_spam`), as
+well as some specific methods:
+
+* `user_may_invite`
+* `user_may_create_room`
+* `user_may_create_room_alias`
+* `user_may_publish_room`
+
+The details of the each of these methods (as well as their inputs and outputs)
+are documented in the `synapse.events.spamcheck.SpamChecker` class.
+
+The `SpamCheckerApi` class provides a way for the custom spam checker class to
+call back into the homeserver internals. It currently implements the following
+methods:
+
+* `get_state_events_in_room`
+
+### Example
+
+```python
+class ExampleSpamChecker:
+    def __init__(self, config, api):
+        self.config = config
+        self.api = api
+
+    def check_event_for_spam(self, foo):
+        return False  # allow all events
+
+    def user_may_invite(self, inviter_userid, invitee_userid, room_id):
+        return True  # allow all invites
+
+    def user_may_create_room(self, userid):
+        return True  # allow all room creations
+
+    def user_may_create_room_alias(self, userid, room_alias):
+        return True  # allow all room aliases
+
+    def user_may_publish_room(self, userid, room_id):
+        return True  # allow publishing of all rooms
+
+    def check_username_for_spam(self, user_profile):
+        return False  # allow all usernames
+```
+
+## Configuration
+
+Modify the `spam_checker` section of your `homeserver.yaml` in the following
+manner:
+
+Create a list entry with the keys `module` and `config`.
+
+* `module` should point to the fully qualified Python class that implements your
+  custom logic, e.g. `my_module.ExampleSpamChecker`.
+
+* `config` is a dictionary that gets passed to the spam checker class.
+
+### Example
+
+This section might look like:
+
+```yaml
+spam_checker:
+  - module: my_module.ExampleSpamChecker
+    config:
+      # Enable or disable a specific option in ExampleSpamChecker.
+      my_custom_option: true
+```
+
+More spam checkers can be added in tandem by appending more items to the list. An
+action is blocked when at least one of the configured spam checkers flags it.
+
+## Examples
+
+The [Mjolnir](https://github.com/matrix-org/mjolnir) project is a full fledged
+example using the Synapse spam checking API, including a bot for dynamic
+configuration.

docs/sso_mapping_providers.md

@@ -0,0 +1,148 @@
+# SSO Mapping Providers
+
+A mapping provider is a Python class (loaded via a Python module) that
+works out how to map attributes of a SSO response to Matrix-specific
+user attributes. Details such as user ID localpart, displayname, and even avatar
+URLs are all things that can be mapped from talking to a SSO service.
+
+As an example, a SSO service may return the email address
+"john.smith@example.com" for a user, whereas Synapse will need to figure out how
+to turn that into a displayname when creating a Matrix user for this individual.
+It may choose `John Smith`, or `Smith, John [Example.com]` or any number of
+variations. As each Synapse configuration may want something different, this is
+where SAML mapping providers come into play.
+
+SSO mapping providers are currently supported for OpenID and SAML SSO
+configurations. Please see the details below for how to implement your own.
+
+External mapping providers are provided to Synapse in the form of an external
+Python module. You can retrieve this module from [PyPi](https://pypi.org) or elsewhere,
+but it must be importable via Synapse (e.g. it must be in the same virtualenv
+as Synapse). The Synapse config is then modified to point to the mapping provider
+(and optionally provide additional configuration for it).
+
+## OpenID Mapping Providers
+
+The OpenID mapping provider can be customized by editing the
+`oidc_config.user_mapping_provider.module` config option.
+
+`oidc_config.user_mapping_provider.config` allows you to provide custom
+configuration options to the module. Check with the module's documentation for
+what options it provides (if any). The options listed by default are for the
+user mapping provider built in to Synapse. If using a custom module, you should
+comment these options out and use those specified by the module instead.
+
+### Building a Custom OpenID Mapping Provider
+
+A custom mapping provider must specify the following methods:
+
+* `__init__(self, parsed_config)`
+   - Arguments:
+     - `parsed_config` - A configuration object that is the return value of the
+       `parse_config` method. You should set any configuration options needed by
+       the module here.
+* `parse_config(config)`
+    - This method should have the `@staticmethod` decoration.
+    - Arguments:
+        - `config` - A `dict` representing the parsed content of the
+          `oidc_config.user_mapping_provider.config` homeserver config option.
+           Runs on homeserver startup. Providers should extract and validate
+           any option values they need here.
+    - Whatever is returned will be passed back to the user mapping provider module's
+      `__init__` method during construction.
+* `get_remote_user_id(self, userinfo)`
+    - Arguments:
+      - `userinfo` - A `authlib.oidc.core.claims.UserInfo` object to extract user
+                     information from.
+    - This method must return a string, which is the unique identifier for the
+      user. Commonly the ``sub`` claim of the response.
+* `map_user_attributes(self, userinfo, token)`
+    - This method should be async.
+    - Arguments:
+      - `userinfo` - A `authlib.oidc.core.claims.UserInfo` object to extract user
+                     information from.
+      - `token` - A dictionary which includes information necessary to make
+                  further requests to the OpenID provider.
+    - Returns a dictionary with two keys:
+      - localpart: A required string, used to generate the Matrix ID.
+      - displayname: An optional string, the display name for the user.
+
+### Default OpenID Mapping Provider
+
+Synapse has a built-in OpenID mapping provider if a custom provider isn't
+specified in the config. It is located at
+[`synapse.handlers.oidc_handler.JinjaOidcMappingProvider`](../synapse/handlers/oidc_handler.py).
+
+## SAML Mapping Providers
+
+The SAML mapping provider can be customized by editing the
+`saml2_config.user_mapping_provider.module` config option.
+
+`saml2_config.user_mapping_provider.config` allows you to provide custom
+configuration options to the module. Check with the module's documentation for
+what options it provides (if any). The options listed by default are for the
+user mapping provider built in to Synapse. If using a custom module, you should
+comment these options out and use those specified by the module instead.
+
+### Building a Custom SAML Mapping Provider
+
+A custom mapping provider must specify the following methods:
+
+* `__init__(self, parsed_config)`
+   - Arguments:
+     - `parsed_config` - A configuration object that is the return value of the
+       `parse_config` method. You should set any configuration options needed by
+       the module here.
+* `parse_config(config)`
+    - This method should have the `@staticmethod` decoration.
+    - Arguments:
+        - `config` - A `dict` representing the parsed content of the
+          `saml_config.user_mapping_provider.config` homeserver config option.
+           Runs on homeserver startup. Providers should extract and validate
+           any option values they need here.
+    - Whatever is returned will be passed back to the user mapping provider module's
+      `__init__` method during construction.
+* `get_saml_attributes(config)`
+    - This method should have the `@staticmethod` decoration.
+    - Arguments:
+        - `config` - A object resulting from a call to `parse_config`.
+    - Returns a tuple of two sets. The first set equates to the SAML auth
+      response attributes that are required for the module to function, whereas
+      the second set consists of those attributes which can be used if available,
+      but are not necessary.
+* `get_remote_user_id(self, saml_response, client_redirect_url)`
+    - Arguments:
+      - `saml_response` - A `saml2.response.AuthnResponse` object to extract user
+                          information from.
+      - `client_redirect_url` - A string, the URL that the client will be
+                                redirected to.
+    - This method must return a string, which is the unique identifier for the
+      user. Commonly the ``uid`` claim of the response.
+* `saml_response_to_user_attributes(self, saml_response, failures, client_redirect_url)`
+    - Arguments:
+      - `saml_response` - A `saml2.response.AuthnResponse` object to extract user
+                          information from.
+      - `failures` - An `int` that represents the amount of times the returned
+                     mxid localpart mapping has failed.  This should be used
+                     to create a deduplicated mxid localpart which should be
+                     returned instead. For example, if this method returns
+                     `john.doe` as the value of `mxid_localpart` in the returned
+                     dict, and that is already taken on the homeserver, this
+                     method will be called again with the same parameters but
+                     with failures=1. The method should then return a different
+                     `mxid_localpart` value, such as `john.doe1`.
+      - `client_redirect_url` - A string, the URL that the client will be
+                                redirected to.
+    - This method must return a dictionary, which will then be used by Synapse
+      to build a new user. The following keys are allowed:
+       * `mxid_localpart` - Required. The mxid localpart of the new user.
+       * `displayname` - The displayname of the new user. If not provided, will default to
+                         the value of `mxid_localpart`.
+       * `emails` - A list of emails for the new user. If not provided, will
+                    default to an empty list.
+
+### Default SAML Mapping Provider
+
+Synapse has a built-in SAML mapping provider if a custom provider isn't
+specified in the config. It is located at
+[`synapse.handlers.saml_handler.DefaultSamlMappingProvider`](../synapse/handlers/saml_handler.py).

docs/systemd-with-workers/README.md

@@ -0,0 +1,67 @@
+# Setting up Synapse with Workers and Systemd
+
+This is a setup for managing synapse with systemd, including support for
+managing workers. It provides a `matrix-synapse` service for the master, as
+well as a `matrix-synapse-worker@` service template for any workers you
+require. Additionally, to group the required services, it sets up a
+`matrix-synapse.target`.
+
+See the folder [system](system) for the systemd unit files.
+
+The folder [workers](workers) contains an example configuration for the
+`federation_reader` worker.
+
+## Synapse configuration files
+
+See [workers.md](../workers.md) for information on how to set up the
+configuration files and reverse-proxy correctly. You can find an example worker
+config in the [workers](workers) folder.
+
+Systemd manages daemonization itself, so ensure that none of the configuration
+files set either `daemonize` or `worker_daemonize`.
+
+The config files of all workers are expected to be located in
+`/etc/matrix-synapse/workers`. If you want to use a different location, edit
+the provided `*.service` files accordingly.
+
+There is no need for a separate configuration file for the master process.
+
+## Set up
+
+1. Adjust synapse configuration files as above.
+1. Copy the `*.service` and `*.target` files in [system](system) to
+`/etc/systemd/system`.
+1. Run `systemctl deamon-reload` to tell systemd to load the new unit files.
+1. Run `systemctl enable matrix-synapse.service`. This will configure the
+synapse master process to be started as part of the `matrix-synapse.target`
+target.
+1. For each worker process to be enabled, run `systemctl enable
+matrix-synapse-worker@<worker_name>.service`. For each `<worker_name>`, there
+should be a corresponding configuration file
+`/etc/matrix-synapse/workers/<worker_name>.yaml`.
+1. Start all the synapse processes with `systemctl start matrix-synapse.target`.
+1. Tell systemd to start synapse on boot with `systemctl enable matrix-synapse.target`/
+
+## Usage
+
+Once the services are correctly set up, you can use the following commands
+to manage your synapse installation:
+
+```sh
+# Restart Synapse master and all workers
+systemctl restart matrix-synapse.target
+
+# Stop Synapse and all workers
+systemctl stop matrix-synapse.target
+
+# Restart the master alone
+systemctl start matrix-synapse.service
+
+# Restart a specific worker (eg. federation_reader); the master is
+# unaffected by this.
+systemctl restart matrix-synapse-worker@federation_reader.service
+
+# Add a new worker (assuming all configs are set up already)
+systemctl enable matrix-synapse-worker@federation_writer.service
+systemctl restart matrix-synapse.target
+```

docs/systemd-with-workers/system/matrix-synapse-worker@.service

@@ -0,0 +1,20 @@
+[Unit]
+Description=Synapse %i
+AssertPathExists=/etc/matrix-synapse/workers/%i.yaml
+# This service should be restarted when the synapse target is restarted.
+PartOf=matrix-synapse.target
+
+[Service]
+Type=notify
+NotifyAccess=main
+User=matrix-synapse
+WorkingDirectory=/var/lib/matrix-synapse
+EnvironmentFile=/etc/default/matrix-synapse
+ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.generic_worker --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --config-path=/etc/matrix-synapse/workers/%i.yaml
+ExecReload=/bin/kill -HUP $MAINPID
+Restart=always
+RestartSec=3
+SyslogIdentifier=matrix-synapse-%i
+
+[Install]
+WantedBy=matrix-synapse.target

docs/systemd-with-workers/system/matrix-synapse.service

@@ -1,5 +1,8 @@
 [Unit]
-Description=Synapse Matrix Homeserver
+Description=Synapse master
+
+# This service should be restarted when the synapse target is restarted.
+PartOf=matrix-synapse.target
 
 [Service]
 Type=notify
@@ -15,4 +18,4 @@ RestartSec=3
 SyslogIdentifier=matrix-synapse
 
 [Install]
-WantedBy=matrix.target
+WantedBy=matrix-synapse.target

docs/systemd-with-workers/system/matrix-synapse.target

@@ -0,0 +1,6 @@
+[Unit]
+Description=Synapse parent target
+After=network.target
+
+[Install]
+WantedBy=multi-user.target

docs/systemd-with-workers/workers/federation_reader.yaml

@@ -10,5 +10,4 @@ worker_listeners:
       resources:
           - names: [federation]
 
-worker_daemonize: false
 worker_log_config: /etc/matrix-synapse/federation-reader-log.yaml

docs/tcp_replication.md

@@ -14,16 +14,18 @@ example flow would be (where '>' indicates master to worker and
 '<' worker to master flows):
 
     > SERVER example.com
-    < REPLICATE events 53
-    > RDATA events 54 ["$foo1:bar.com", ...]
-    > RDATA events 55 ["$foo4:bar.com", ...]
+    < REPLICATE
+    > POSITION events master 53
+    > RDATA events master 54 ["$foo1:bar.com", ...]
+    > RDATA events master 55 ["$foo4:bar.com", ...]
 
-The example shows the server accepting a new connection and sending its
-identity with the `SERVER` command, followed by the client asking to
-subscribe to the `events` stream from the token `53`. The server then
-periodically sends `RDATA` commands which have the format
-`RDATA <stream_name> <token> <row>`, where the format of `<row>` is
-defined by the individual streams.
+The example shows the server accepting a new connection and sending its identity
+with the `SERVER` command, followed by the client server to respond with the
+position of all streams. The server then periodically sends `RDATA` commands
+which have the format `RDATA <stream_name> <instance_name> <token> <row>`, where
+the format of `<row>` is defined by the individual streams. The
+`<instance_name>` is the name of the Synapse process that generated the data
+(usually "master").
 
 Error reporting happens by either the client or server sending an ERROR
 command, and usually the connection will be closed.
@@ -32,9 +34,6 @@ Since the protocol is a simple line based, its possible to manually
 connect to the server using a tool like netcat. A few things should be
 noted when manually using the protocol:
 
--   When subscribing to a stream using `REPLICATE`, the special token
-    `NOW` can be used to get all future updates. The special stream name
-    `ALL` can be used with `NOW` to subscribe to all available streams.
 -   The federation stream is only available if federation sending has
     been disabled on the main process.
 -   The server will only time connections out that have sent a `PING`
@@ -55,7 +54,7 @@ The basic structure of the protocol is line based, where the initial
 word of each line specifies the command. The rest of the line is parsed
 based on the command. For example, the RDATA command is defined as:
 
-    RDATA <stream_name> <token> <row_json>
+    RDATA <stream_name> <instance_name> <token> <row_json>
 
 (Note that <row_json> may contains spaces, but cannot contain
 newlines.)
@@ -91,9 +90,7 @@ The client:
 -   Sends a `NAME` command, allowing the server to associate a human
     friendly name with the connection. This is optional.
 -   Sends a `PING` as above
--   For each stream the client wishes to subscribe to it sends a
-    `REPLICATE` with the `stream_name` and token it wants to subscribe
-    from.
+-   Sends a `REPLICATE` to get the current position of all streams.
 -   On receipt of a `SERVER` command, checks that the server name
     matches the expected server name.
 
@@ -140,14 +137,12 @@ the wire:
     > PING 1490197665618
     < NAME synapse.app.appservice
     < PING 1490197665618
-    < REPLICATE events 1
-    < REPLICATE backfill 1
-    < REPLICATE caches 1
-    > POSITION events 1
-    > POSITION backfill 1
-    > POSITION caches 1
-    > RDATA caches 2 ["get_user_by_id",["@01register-user:localhost:8823"],1490197670513]
-    > RDATA events 14 ["$149019767112vOHxz:localhost:8823",
+    < REPLICATE
+    > POSITION events master 1
+    > POSITION backfill master 1
+    > POSITION caches master 1
+    > RDATA caches master 2 ["get_user_by_id",["@01register-user:localhost:8823"],1490197670513]
+    > RDATA events master 14 ["$149019767112vOHxz:localhost:8823",
         "!AFDCvgApUmpdfVjIXm:localhost:8823","m.room.guest_access","",null]
     < PING 1490197675618
     > ERROR server stopping
@@ -158,10 +153,10 @@ position without needing to send data with the `RDATA` command.
 
 An example of a batched set of `RDATA` is:
 
-    > RDATA caches batch ["get_user_by_id",["@test:localhost:8823"],1490197670513]
-    > RDATA caches batch ["get_user_by_id",["@test2:localhost:8823"],1490197670513]
-    > RDATA caches batch ["get_user_by_id",["@test3:localhost:8823"],1490197670513]
-    > RDATA caches 54 ["get_user_by_id",["@test4:localhost:8823"],1490197670513]
+    > RDATA caches master batch ["get_user_by_id",["@test:localhost:8823"],1490197670513]
+    > RDATA caches master batch ["get_user_by_id",["@test2:localhost:8823"],1490197670513]
+    > RDATA caches master batch ["get_user_by_id",["@test3:localhost:8823"],1490197670513]
+    > RDATA caches master 54 ["get_user_by_id",["@test4:localhost:8823"],1490197670513]
 
 In this case the client shouldn't advance their caches token until it
 sees the the last `RDATA`.
@@ -181,9 +176,14 @@ client (C):
 
 #### POSITION (S)
 
-   The position of the stream has been updated. Sent to the client
-    after all missing updates for a stream have been sent to the client
-    and they're now up to date.
+   On receipt of a POSITION command clients should check if they have missed any
+   updates, and if so then fetch them out of band. Sent in response to a
+   REPLICATE command (but can happen at any time).
+
+   The POSITION command includes the source of the stream. Currently all streams
+   are written by a single process (usually "master"). If fetching missing
+   updates via HTTP API, rather than via the DB, then processes should make the
+   request to the appropriate process.
 
 #### ERROR (S, C)
 
@@ -199,24 +199,17 @@ client (C):
 
 #### REPLICATE (C)
 
-Asks the server to replicate a given stream. The syntax is:
-
-```
-    REPLICATE <stream_name> <token>
-```
-
-Where `<token>` may be either:
- * a numeric stream_id to stream updates since (exclusive)
- * `NOW` to stream all subsequent updates.
-
-The `<stream_name>` is the name of a replication stream to subscribe 
-to (see [here](../synapse/replication/tcp/streams/_base.py) for a list
-of streams). It can also be `ALL` to subscribe to all known streams,
-in which case the `<token>` must be set to `NOW`.
+Asks the server for the current position of all streams.
 
 #### USER_SYNC (C)
 
-   A user has started or stopped syncing
+   A user has started or stopped syncing on this process.
+
+#### CLEAR_USER_SYNC (C)
+
+   The server should clear all associated user sync data from the worker.
+
+   This is used when a worker is shutting down.
 
 #### FEDERATION_ACK (C)
 
@@ -226,13 +219,9 @@ in which case the `<token>` must be set to `NOW`.
 
    Inform the server a pusher should be removed
 
-#### INVALIDATE_CACHE (C)
+### REMOTE_SERVER_UP (S, C)
 
-   Inform the server a cache should be invalidated
-
-#### SYNC (S, C)
-
-   Used exclusively in tests
+   Inform other processes that a remote server may have come back online.
 
 See `synapse/replication/tcp/commands.py` for a detailed description and
 the format of each command.
@@ -248,7 +237,12 @@ Each individual cache invalidation results in a row being sent down
 replication, which includes the cache name (the name of the function)
 and they key to invalidate. For example:
 
-    > RDATA caches 550953771 ["get_user_by_id", ["@bob:example.com"], 1550574873251]
+    > RDATA caches master 550953771 ["get_user_by_id", ["@bob:example.com"], 1550574873251]
+
+Alternatively, an entire cache can be invalidated by sending down a `null`
+instead of the key. For example:
+
+    > RDATA caches master 550953772 ["get_user_by_id", null, 1550574873252]
 
 However, there are times when a number of caches need to be invalidated
 at the same time with the same key. To reduce traffic we batch those

docs/turn-howto.md

@@ -11,7 +11,14 @@ TURN server.
 
 The following sections describe how to install [coturn](<https://github.com/coturn/coturn>) (which implements the TURN REST API) and integrate it with synapse.
 
-## `coturn` Setup
+## Requirements
+
+For TURN relaying with `coturn` to work, it must be hosted on a server/endpoint with a public IP.
+
+Hosting TURN behind a NAT (even with appropriate port forwarding) is known to cause issues
+and to often not work.
+
+## `coturn` setup
 
 ### Initial installation
 
@@ -19,7 +26,13 @@ The TURN daemon `coturn` is available from a variety of sources such as native p
 
 #### Debian installation
 
-    # apt install coturn
+Just install the debian package:
+
+```sh
+apt install coturn
+```
+
+This will install and start a systemd service called `coturn`.
 
 #### Source installation
 
@@ -56,38 +69,52 @@ The TURN daemon `coturn` is available from a variety of sources such as native p
 1.  Consider your security settings. TURN lets users request a relay which will
     connect to arbitrary IP addresses and ports. The following configuration is
     suggested as a minimum starting point:
-    
+
         # VoIP traffic is all UDP. There is no reason to let users connect to arbitrary TCP endpoints via the relay.
         no-tcp-relay
-        
+
         # don't let the relay ever try to connect to private IP address ranges within your network (if any)
         # given the turn server is likely behind your firewall, remember to include any privileged public IPs too.
         denied-peer-ip=10.0.0.0-10.255.255.255
         denied-peer-ip=192.168.0.0-192.168.255.255
         denied-peer-ip=172.16.0.0-172.31.255.255
-        
+
         # special case the turn server itself so that client->TURN->TURN->client flows work
         allowed-peer-ip=10.0.0.1
-        
+
         # consider whether you want to limit the quota of relayed streams per user (or total) to avoid risk of DoS.
         user-quota=12 # 4 streams per video call, so 12 streams = 3 simultaneous relayed calls per user.
         total-quota=1200
 
-    Ideally coturn should refuse to relay traffic which isn't SRTP; see
-    <https://github.com/matrix-org/synapse/issues/2009>
+1.  Also consider supporting TLS/DTLS. To do this, add the following settings
+    to `turnserver.conf`:
+
+        # TLS certificates, including intermediate certs.
+        # For Let's Encrypt certificates, use `fullchain.pem` here.
+        cert=/path/to/fullchain.pem
+
+        # TLS private key file
+        pkey=/path/to/privkey.pem
 
 1.  Ensure your firewall allows traffic into the TURN server on the ports
-    you've configured it to listen on (remember to allow both TCP and UDP TURN
-    traffic)
+    you've configured it to listen on (By default: 3478 and 5349 for the TURN(s)
+    traffic (remember to allow both TCP and UDP traffic), and ports 49152-65535
+    for the UDP relay.)
 
-1.  If you've configured coturn to support TLS/DTLS, generate or import your
-    private key and certificate.
+1.  (Re)start the turn server:
 
-1.  Start the turn server:
+    * If you used the Debian package (or have set up a systemd unit yourself):
+      ```sh
+      systemctl restart coturn
+      ```
 
-         bin/turnserver -o
+    * If you installed from source:
 
-## synapse Setup
+      ```sh
+      bin/turnserver -o
+      ```
+
+## Synapse setup
 
 Your home server configuration file needs the following extra keys:
 
@@ -113,13 +140,20 @@ Your home server configuration file needs the following extra keys:
 As an example, here is the relevant section of the config file for matrix.org:
 
     turn_uris: [ "turn:turn.matrix.org:3478?transport=udp", "turn:turn.matrix.org:3478?transport=tcp" ]
-    turn_shared_secret: n0t4ctuAllymatr1Xd0TorgSshar3d5ecret4obvIousreAsons
+    turn_shared_secret: "n0t4ctuAllymatr1Xd0TorgSshar3d5ecret4obvIousreAsons"
     turn_user_lifetime: 86400000
     turn_allow_guests: True
 
 After updating the homeserver configuration, you must restart synapse:
 
+  * If you use synctl:
+    ```sh
     cd /where/you/run/synapse
     ./synctl restart
+    ```
+  * If you use systemd:
+    ```
+    systemctl restart synapse.service
+    ```
 
 ..and your Home Server now supports VoIP relaying!

docs/workers.md

@@ -1,23 +1,31 @@
 # Scaling synapse via workers
 
-Synapse has experimental support for splitting out functionality into
-multiple separate python processes, helping greatly with scalability.  These
+For small instances it recommended to run Synapse in monolith mode (the
+default). For larger instances where performance is a concern it can be helpful
+to split out functionality into multiple separate python processes. These
 processes are called 'workers', and are (eventually) intended to scale
 horizontally independently.
 
-All of the below is highly experimental and subject to change as Synapse evolves,
-but documenting it here to help folks needing highly scalable Synapses similar
-to the one running matrix.org!
+Synapse's worker support is under active development and subject to change as
+we attempt to rapidly scale ever larger Synapse instances. However we are
+documenting it here to help admins needing a highly scalable Synapse instance
+similar to the one running `matrix.org`.
 
-All processes continue to share the same database instance, and as such, workers
-only work with postgres based synapse deployments (sharing a single sqlite
-across multiple processes is a recipe for disaster, plus you should be using
-postgres anyway if you care about scalability).
+All processes continue to share the same database instance, and as such,
+workers only work with PostgreSQL-based Synapse deployments. SQLite should only
+be used for demo purposes and any admin considering workers should already be
+running PostgreSQL.
 
-The workers communicate with the master synapse process via a synapse-specific
-TCP protocol called 'replication' - analogous to MySQL or Postgres style
-database replication; feeding a stream of relevant data to the workers so they
-can be kept in sync with the main synapse process and database state.
+## Master/worker communication
+
+The workers communicate with the master process via a Synapse-specific protocol
+called 'replication' (analogous to MySQL- or Postgres-style database
+replication) which feeds a stream of relevant data from the master to the
+workers so they can be kept in sync with the master process and database state.
+
+Additionally, workers may make HTTP requests to the master, to send information
+in the other direction. Typically this is used for operations which need to
+wait for a reply - such as sending an event.
 
 ## Configuration
 
@@ -27,72 +35,61 @@ the correct worker, or to the main synapse instance. Note that this includes
 requests made to the federation port. See [reverse_proxy.md](reverse_proxy.md)
 for information on setting up a reverse proxy.
 
-To enable workers, you need to add two replication listeners to the master
-synapse, e.g.:
+To enable workers, you need to add *two* replication listeners to the
+main Synapse configuration file (`homeserver.yaml`). For example:
 
-    listeners:
-      # The TCP replication port
-      - port: 9092
-        bind_address: '127.0.0.1'
-        type: replication
-      # The HTTP replication port
-      - port: 9093
-        bind_address: '127.0.0.1'
-        type: http
-        resources:
-         - names: [replication]
+```yaml
+listeners:
+  # The TCP replication port
+  - port: 9092
+    bind_address: '127.0.0.1'
+    type: replication
+
+  # The HTTP replication port
+  - port: 9093
+    bind_address: '127.0.0.1'
+    type: http
+    resources:
+     - names: [replication]
+```
 
 Under **no circumstances** should these replication API listeners be exposed to
-the public internet; it currently implements no authentication whatsoever and is
-unencrypted.
+the public internet; they have no authentication and are unencrypted.
 
-(Roughly, the TCP port is used for streaming data from the master to the
-workers, and the HTTP port for the workers to send data to the main
-synapse process.)
+You should then create a set of configs for the various worker processes.  Each
+worker configuration file inherits the configuration of the main homeserver
+configuration file.  You can then override configuration specific to that
+worker, e.g. the HTTP listener that it provides (if any); logging
+configuration; etc.  You should minimise the number of overrides though to
+maintain a usable config.
 
-You then create a set of configs for the various worker processes.  These
-should be worker configuration files, and should be stored in a dedicated
-subdirectory, to allow synctl to manipulate them. An additional configuration
-for the master synapse process will need to be created because the process will
-not be started automatically. That configuration should look like this:
+In the config file for each worker, you must specify the type of worker
+application (`worker_app`). The currently available worker applications are
+listed below. You must also specify the replication endpoints that it should
+talk to on the main synapse process.  `worker_replication_host` should specify
+the host of the main synapse, `worker_replication_port` should point to the TCP
+replication listener port and `worker_replication_http_port` should point to
+the HTTP replication port.
 
-    worker_app: synapse.app.homeserver
-    daemonize: true
+For example:
 
-Each worker configuration file inherits the configuration of the main homeserver
-configuration file.  You can then override configuration specific to that worker,
-e.g. the HTTP listener that it provides (if any); logging configuration; etc.
-You should minimise the number of overrides though to maintain a usable config.
+```yaml
+worker_app: synapse.app.synchrotron
 
-You must specify the type of worker application (`worker_app`). The currently
-available worker applications are listed below. You must also specify the
-replication endpoints that it's talking to on the main synapse process.
-`worker_replication_host` should specify the host of the main synapse,
-`worker_replication_port` should point to the TCP replication listener port and
-`worker_replication_http_port` should point to the HTTP replication port.
+# The replication listener on the synapse to talk to.
+worker_replication_host: 127.0.0.1
+worker_replication_port: 9092
+worker_replication_http_port: 9093
 
-Currently, the `event_creator` and `federation_reader` workers require specifying
-`worker_replication_http_port`.
+worker_listeners:
+ - type: http
+   port: 8083
+   resources:
+     - names:
+       - client
 
-For instance:
-
-    worker_app: synapse.app.synchrotron
-
-    # The replication listener on the synapse to talk to.
-    worker_replication_host: 127.0.0.1
-    worker_replication_port: 9092
-    worker_replication_http_port: 9093
-
-    worker_listeners:
-     - type: http
-       port: 8083
-       resources:
-         - names:
-           - client
-
-    worker_daemonize: True
-    worker_pid_file: /home/matrix/synapse/synchrotron.pid
-    worker_log_config: /home/matrix/synapse/config/synchrotron_log_config.yaml
+worker_log_config: /home/matrix/synapse/config/synchrotron_log_config.yaml
+```
 
 ...is a full configuration for a synchrotron worker instance, which will expose a
 plain HTTP `/sync` endpoint on port 8083 separately from the `/sync` endpoint provided
@@ -101,7 +98,75 @@ by the main synapse.
 Obviously you should configure your reverse-proxy to route the relevant
 endpoints to the worker (`localhost:8083` in the above example).
 
-Finally, to actually run your worker-based synapse, you must pass synctl the -a
+Finally, you need to start your worker processes. This can be done with either
+`synctl` or your distribution's preferred service manager such as `systemd`. We
+recommend the use of `systemd` where available: for information on setting up
+`systemd` to start synapse workers, see
+[systemd-with-workers](systemd-with-workers). To use `synctl`, see below.
+
+### **Experimental** support for replication over redis
+
+As of Synapse v1.13.0, it is possible to configure Synapse to send replication
+via a [Redis pub/sub channel](https://redis.io/topics/pubsub). This is an
+alternative to direct TCP connections to the master: rather than all the
+workers connecting to the master, all the workers and the master connect to
+Redis, which relays replication commands between processes. This can give a
+significant cpu saving on the master and will be a prerequisite for upcoming
+performance improvements.
+
+Note that this support is currently experimental; you may experience lost
+messages and similar problems! It is strongly recommended that admins setting
+up workers for the first time use direct TCP replication as above.
+
+To configure Synapse to use Redis:
+
+1. Install Redis following the normal procedure for your distribution - for
+   example, on Debian, `apt install redis-server`. (It is safe to use an
+   existing Redis deployment if you have one: we use a pub/sub stream named
+   according to the `server_name` of your synapse server.)
+2. Check Redis is running and accessible: you should be able to `echo PING | nc -q1
+   localhost 6379` and get a response of `+PONG`.
+3. Install the python prerequisites. If you installed synapse into a
+   virtualenv, this can be done with:
+   ```sh
+   pip install matrix-synapse[redis]
+   ```
+   The debian packages from matrix.org already include the required
+   dependencies.
+4. Add config to the shared configuration (`homeserver.yaml`):
+    ```yaml
+    redis:
+      enabled: true
+    ```
+    Optional parameters which can go alongside `enabled` are `host`, `port`,
+    `password`. Normally none of these are required.
+5. Restart master and all workers.
+
+Once redis replication is in use, `worker_replication_port` is redundant and
+can be removed from the worker configuration files. Similarly, the
+configuration for the `listener` for the TCP replication port can be removed
+from the main configuration file. Note that the HTTP replication port is
+still required.
+
+### Using synctl
+
+If you want to use `synctl` to manage your synapse processes, you will need to
+create an an additional configuration file for the master synapse process. That
+configuration should look like this:
+
+```yaml
+worker_app: synapse.app.homeserver
+```
+
+Additionally, each worker app must be configured with the name of a "pid file",
+to which it will write its process ID when it starts. For example, for a
+synchrotron, you might write:
+
+```yaml
+worker_pid_file: /home/matrix/synapse/synchrotron.pid
+```
+
+Finally, to actually run your worker-based synapse, you must pass synctl the `-a`
 commandline option to tell it to operate on all the worker configurations found
 in the given directory, e.g.:
 
@@ -168,20 +233,42 @@ endpoints matching the following regular expressions:
     ^/_matrix/federation/v1/make_join/
     ^/_matrix/federation/v1/make_leave/
     ^/_matrix/federation/v1/send_join/
+    ^/_matrix/federation/v2/send_join/
     ^/_matrix/federation/v1/send_leave/
+    ^/_matrix/federation/v2/send_leave/
     ^/_matrix/federation/v1/invite/
+    ^/_matrix/federation/v2/invite/
     ^/_matrix/federation/v1/query_auth/
     ^/_matrix/federation/v1/event_auth/
     ^/_matrix/federation/v1/exchange_third_party_invite/
+    ^/_matrix/federation/v1/user/devices/
     ^/_matrix/federation/v1/send/
+    ^/_matrix/federation/v1/get_groups_publicised$
     ^/_matrix/key/v2/query
 
+Additionally, the following REST endpoints can be handled for GET requests:
+
+    ^/_matrix/federation/v1/groups/
+
 The above endpoints should all be routed to the federation_reader worker by the
 reverse-proxy configuration.
 
 The `^/_matrix/federation/v1/send/` endpoint must only be handled by a single
 instance.
 
+Note that `federation` must be added to the listener resources in the worker config:
+
+```yaml
+worker_app: synapse.app.federation_reader
+...
+worker_listeners:
+ - type: http
+   port: <port>
+   resources:
+     - names:
+       - federation
+```
+
 ### `synapse.app.federation_sender`
 
 Handles sending federation traffic to other servers. Doesn't handle any
@@ -199,7 +286,9 @@ Handles the media repository. It can handle all endpoints starting with:
 ... and the following regular expressions matching media-specific administration APIs:
 
     ^/_synapse/admin/v1/purge_media_cache$
-    ^/_synapse/admin/v1/room/.*/media$
+    ^/_synapse/admin/v1/room/.*/media.*$
+    ^/_synapse/admin/v1/user/.*/media.*$
+    ^/_synapse/admin/v1/media/.*$
     ^/_synapse/admin/v1/quarantine_media/.*$
 
 You should also set `enable_media_repo: False` in the shared configuration
@@ -218,7 +307,12 @@ expose the `media` resource. For example:
            - media
 ```
 
-Note this worker cannot be load-balanced: only one instance should be active.
+Note that if running multiple media repositories they must be on the same server
+and you must configure a single instance to run the background tasks, e.g.:
+
+```yaml
+    media_instance_running_background_jobs: "media-repository-1"
+```
 
 ### `synapse.app.client_reader`
 
@@ -236,15 +330,22 @@ following regular expressions:
     ^/_matrix/client/(api/v1|r0|unstable)/keys/changes$
     ^/_matrix/client/versions$
     ^/_matrix/client/(api/v1|r0|unstable)/voip/turnServer$
+    ^/_matrix/client/(api/v1|r0|unstable)/joined_groups$
+    ^/_matrix/client/(api/v1|r0|unstable)/publicised_groups$
+    ^/_matrix/client/(api/v1|r0|unstable)/publicised_groups/
 
 Additionally, the following REST endpoints can be handled for GET requests:
 
     ^/_matrix/client/(api/v1|r0|unstable)/pushrules/.*$
+    ^/_matrix/client/(api/v1|r0|unstable)/groups/.*$
+    ^/_matrix/client/(api/v1|r0|unstable)/user/[^/]*/account_data/
+    ^/_matrix/client/(api/v1|r0|unstable)/user/[^/]*/rooms/[^/]*/account_data/
 
 Additionally, the following REST endpoints can be handled, but all requests must
 be routed to the same instance:
 
     ^/_matrix/client/(r0|unstable)/register$
+    ^/_matrix/client/(r0|unstable)/auth/.*/fallback/web$
 
 Pagination requests can also be handled, but all requests with the same path
 room must be routed to the same instance. Additionally, care must be taken to
@@ -260,6 +361,10 @@ the following regular expressions:
 
     ^/_matrix/client/(api/v1|r0|unstable)/user_directory/search$
 
+When using this worker you must also set `update_user_directory: False` in the
+shared configuration file to stop the main synapse running background
+jobs related to updating the user directory.
+
 ### `synapse.app.frontend_proxy`
 
 Proxies some frequently-requested client endpoints to add caching and remove
@@ -288,6 +393,7 @@ file. For example:
 Handles some event creation. It can handle REST endpoints matching:
 
     ^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/send
+    ^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/state/
     ^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/(join|invite|leave|ban|unban|kick)$
     ^/_matrix/client/(api/v1|r0|unstable)/join/
     ^/_matrix/client/(api/v1|r0|unstable)/profile/

mypy.ini

@@ -7,6 +7,9 @@ show_error_codes = True
 show_traceback = True
 mypy_path = stubs
 
+[mypy-pymacaroons.*]
+ignore_missing_imports = True
+
 [mypy-zope]
 ignore_missing_imports = True
 
@@ -63,3 +66,18 @@ ignore_missing_imports = True
 
 [mypy-sentry_sdk]
 ignore_missing_imports = True
+
+[mypy-PIL.*]
+ignore_missing_imports = True
+
+[mypy-lxml]
+ignore_missing_imports = True
+
+[mypy-jwt.*]
+ignore_missing_imports = True
+
+[mypy-authlib.*]
+ignore_missing_imports = True
+
+[mypy-rust_python_jaeger_reporter.*]
+ignore_missing_imports = True

scripts-dev/build_debian_packages

@@ -24,9 +24,8 @@ DISTS = (
     "debian:sid",
     "ubuntu:xenial",
     "ubuntu:bionic",
-    "ubuntu:cosmic",
-    "ubuntu:disco",
     "ubuntu:eoan",
+    "ubuntu:focal",
 )
 
 DESC = '''\

scripts-dev/check-newsfragment

@@ -7,7 +7,9 @@ set -e
 
 # make sure that origin/develop is up to date
 git remote set-branches --add origin develop
-git fetch origin develop
+git fetch -q origin develop
+
+pr="$BUILDKITE_PULL_REQUEST"
 
 # if there are changes in the debian directory, check that the debian changelog
 # has been updated
@@ -20,20 +22,30 @@ fi
 
 # if there are changes *outside* the debian directory, check that the
 # newsfragments have been updated.
-if git diff --name-only FETCH_HEAD... | grep -qv '^debian/'; then
-    tox -e check-newsfragment
+if ! git diff --name-only FETCH_HEAD... | grep -qv '^debian/'; then
+    exit 0
 fi
 
+tox -qe check-newsfragment
+
 echo
 echo "--------------------------"
 echo
 
-# check that any new newsfiles on this branch end with a full stop.
+matched=0
 for f in `git diff --name-only FETCH_HEAD... -- changelog.d`; do
+    # check that any modified newsfiles on this branch end with a full stop.
     lastchar=`tr -d '\n' < $f | tail -c 1`
     if [ $lastchar != '.' -a $lastchar != '!' ]; then
         echo -e "\e[31mERROR: newsfragment $f does not end with a '.' or '!'\e[39m" >&2
         exit 1
     fi
+
+    # see if this newsfile corresponds to the right PR
+    [[ -n "$pr" && "$f" == changelog.d/"$pr".* ]] && matched=1
 done
 
+if [[ -n "$pr" && "$matched" -eq 0 ]]; then
+    echo -e "\e[31mERROR: Did not find a news fragment with the right number: expected changelog.d/$pr.*.\e[39m" >&2
+    exit 1
+fi

scripts-dev/config-lint.sh

@@ -3,7 +3,8 @@
 # Exits with 0 if there are no problems, or another code otherwise.
 
 # Fix non-lowercase true/false values
-sed -i -E "s/: +True/: true/g; s/: +False/: false/g;" docs/sample_config.yaml
+sed -i.bak -E "s/: +True/: true/g; s/: +False/: false/g;" docs/sample_config.yaml
+rm docs/sample_config.yaml.bak
 
 # Check if anything changed
 git diff --exit-code docs/sample_config.yaml

scripts-dev/convert_server_keys.py

@@ -3,8 +3,6 @@ import json
 import sys
 import time
 
-import six
-
 import psycopg2
 import yaml
 from canonicaljson import encode_canonical_json
@@ -12,10 +10,7 @@ from signedjson.key import read_signing_keys
 from signedjson.sign import sign_json
 from unpaddedbase64 import encode_base64
 
-if six.PY2:
-    db_type = six.moves.builtins.buffer
-else:
-    db_type = memoryview
+db_binary_type = memoryview
 
 
 def select_v1_keys(connection):
@@ -72,7 +67,7 @@ def rows_v2(server, json):
     valid_until = json["valid_until_ts"]
     key_json = encode_canonical_json(json)
     for key_id in json["verify_keys"]:
-        yield (server, key_id, "-", valid_until, valid_until, db_type(key_json))
+        yield (server, key_id, "-", valid_until, valid_until, db_binary_type(key_json))
 
 
 def main():
@@ -103,7 +98,7 @@ def main():
 
     yaml.safe_dump(result, sys.stdout, default_flow_style=False)
 
-    rows = list(row for server, json in result.items() for row in rows_v2(server, json))
+    rows = [row for server, json in result.items() for row in rows_v2(server, json)]
 
     cursor = connection.cursor()
     cursor.executemany(

scripts-dev/federation_client.py

@@ -21,8 +21,7 @@ import argparse
 import base64
 import json
 import sys
-
-from six.moves.urllib import parse as urlparse
+from urllib import parse as urlparse
 
 import nacl.signing
 import requests

scripts-dev/lint.sh

@@ -2,8 +2,8 @@
 #
 # Runs linting scripts over the local Synapse checkout
 # isort - sorts import statements
-# flake8 - lints and finds mistakes
 # black - opinionated code formatter
+# flake8 - lints and finds mistakes
 
 set -e
 
@@ -16,6 +16,6 @@ fi
 
 echo "Linting these locations: $files"
 isort -y -rc $files
-flake8 $files
 python3 -m black $files
 ./scripts-dev/config-lint.sh
+flake8 $files

scripts-dev/update_database

@@ -22,10 +22,12 @@ import yaml
 
 from twisted.internet import defer, reactor
 
+import synapse
 from synapse.config.homeserver import HomeServerConfig
 from synapse.metrics.background_process_metrics import run_as_background_process
 from synapse.server import HomeServer
 from synapse.storage import DataStore
+from synapse.util.versionstring import get_version_string
 
 logger = logging.getLogger("update_database")
 
@@ -38,6 +40,8 @@ class MockHomeserver(HomeServer):
             config.server_name, reactor=reactor, config=config, **kwargs
         )
 
+        self.version_string = "Synapse/"+get_version_string(synapse)
+
 
 if __name__ == "__main__":
     parser = argparse.ArgumentParser(
@@ -81,15 +85,17 @@ if __name__ == "__main__":
     hs.setup()
     store = hs.get_datastore()
 
-    @defer.inlineCallbacks
-    def run_background_updates():
-        yield store.db.updates.run_background_updates(sleep=False)
+    async def run_background_updates():
+        await store.db.updates.run_background_updates(sleep=False)
         # Stop the reactor to exit the script once every background update is run.
         reactor.stop()
 
-    # Apply all background updates on the database.
-    reactor.callWhenRunning(
-        lambda: run_as_background_process("background_updates", run_background_updates)
-    )
+    def run():
+        # Apply all background updates on the database.
+        defer.ensureDeferred(
+            run_as_background_process("background_updates", run_background_updates)
+        )
+
+    reactor.callWhenRunning(run)
 
     reactor.run()

scripts/hash_password

@@ -52,7 +52,7 @@ if __name__ == "__main__":
     if "config" in args and args.config:
         config = yaml.safe_load(args.config)
         bcrypt_rounds = config.get("bcrypt_rounds", bcrypt_rounds)
-        password_config = config.get("password_config", {})
+        password_config = config.get("password_config", None) or {}
         password_pepper = password_config.get("pepper", password_pepper)
     password = args.password
 

scripts/synapse_port_db

@@ -23,17 +23,18 @@ import sys
 import time
 import traceback
 
-from six import string_types
-
 import yaml
 
-from twisted.enterprise import adbapi
 from twisted.internet import defer, reactor
 
+import synapse
 from synapse.config.database import DatabaseConnectionConfig
 from synapse.config.homeserver import HomeServerConfig
-from synapse.logging.context import PreserveLoggingContext
-from synapse.storage._base import LoggingTransaction
+from synapse.logging.context import (
+    LoggingContext,
+    make_deferred_yieldable,
+    run_in_background,
+)
 from synapse.storage.data_stores.main.client_ips import ClientIpBackgroundUpdateStore
 from synapse.storage.data_stores.main.deviceinbox import (
     DeviceInboxBackgroundUpdateStore,
@@ -61,6 +62,7 @@ from synapse.storage.database import Database, make_conn
 from synapse.storage.engines import create_engine
 from synapse.storage.prepare_database import prepare_database
 from synapse.util import Clock
+from synapse.util.versionstring import get_version_string
 
 logger = logging.getLogger("synapse_port_db")
 
@@ -87,6 +89,7 @@ BOOLEAN_COLUMNS = {
     "account_validity": ["email_sent"],
     "redactions": ["have_censored"],
     "room_stats_state": ["is_federatable"],
+    "local_media_repository": ["safe_from_quarantine"],
 }
 
 
@@ -118,13 +121,40 @@ APPEND_ONLY_TABLES = [
     "presence_stream",
     "push_rules_stream",
     "ex_outlier_stream",
-    "cache_invalidation_stream",
+    "cache_invalidation_stream_by_instance",
     "public_room_list_stream",
     "state_group_edges",
     "stream_ordering_to_exterm",
 ]
 
 
+IGNORED_TABLES = {
+    # We don't port these tables, as they're a faff and we can regenerate
+    # them anyway.
+    "user_directory",
+    "user_directory_search",
+    "user_directory_search_content",
+    "user_directory_search_docsize",
+    "user_directory_search_segdir",
+    "user_directory_search_segments",
+    "user_directory_search_stat",
+    "user_directory_search_pos",
+    "users_who_share_private_rooms",
+    "users_in_public_room",
+    # UI auth sessions have foreign keys so additional care needs to be taken,
+    # the sessions are transient anyway, so ignore them.
+    "ui_auth_sessions",
+    "ui_auth_sessions_credentials",
+}
+
+
+# Error returned by the run function. Used at the top-level part of the script to
+# handle errors and return codes.
+end_error = None
+# The exec_info for the error, if any. If error is defined but not exec_info the script
+# will show only the error message without the stacktrace, if exec_info is defined but
+# not the error then the script will show nothing outside of what's printed in the run
+# function. If both are defined, the script will print both the error and the stacktrace.
 end_error_exec_info = None
 
 
@@ -177,6 +207,7 @@ class MockHomeserver:
         self.clock = Clock(reactor)
         self.config = config
         self.hostname = config.server_name
+        self.version_string = "Synapse/" + get_version_string(synapse)
 
     def get_clock(self):
         return self.clock
@@ -184,16 +215,18 @@ class MockHomeserver:
     def get_reactor(self):
         return reactor
 
+    def get_instance_name(self):
+        return "master"
+
 
 class Porter(object):
     def __init__(self, **kwargs):
         self.__dict__.update(kwargs)
 
-    @defer.inlineCallbacks
-    def setup_table(self, table):
+    async def setup_table(self, table):
         if table in APPEND_ONLY_TABLES:
             # It's safe to just carry on inserting.
-            row = yield self.postgres_store.db.simple_select_one(
+            row = await self.postgres_store.db.simple_select_one(
                 table="port_from_sqlite3",
                 keyvalues={"table_name": table},
                 retcols=("forward_rowid", "backward_rowid"),
@@ -207,10 +240,10 @@ class Porter(object):
                         forward_chunk,
                         already_ported,
                         total_to_port,
-                    ) = yield self._setup_sent_transactions()
+                    ) = await self._setup_sent_transactions()
                     backward_chunk = 0
                 else:
-                    yield self.postgres_store.db.simple_insert(
+                    await self.postgres_store.db.simple_insert(
                         table="port_from_sqlite3",
                         values={
                             "table_name": table,
@@ -227,7 +260,7 @@ class Porter(object):
                 backward_chunk = row["backward_rowid"]
 
             if total_to_port is None:
-                already_ported, total_to_port = yield self._get_total_count_to_port(
+                already_ported, total_to_port = await self._get_total_count_to_port(
                     table, forward_chunk, backward_chunk
                 )
         else:
@@ -238,9 +271,9 @@ class Porter(object):
                 )
                 txn.execute("TRUNCATE %s CASCADE" % (table,))
 
-            yield self.postgres_store.execute(delete_all)
+            await self.postgres_store.execute(delete_all)
 
-            yield self.postgres_store.db.simple_insert(
+            await self.postgres_store.db.simple_insert(
                 table="port_from_sqlite3",
                 values={"table_name": table, "forward_rowid": 1, "backward_rowid": 0},
             )
@@ -248,16 +281,13 @@ class Porter(object):
             forward_chunk = 1
             backward_chunk = 0
 
-            already_ported, total_to_port = yield self._get_total_count_to_port(
+            already_ported, total_to_port = await self._get_total_count_to_port(
                 table, forward_chunk, backward_chunk
             )
 
-        defer.returnValue(
-            (table, already_ported, total_to_port, forward_chunk, backward_chunk)
-        )
+        return table, already_ported, total_to_port, forward_chunk, backward_chunk
 
-    @defer.inlineCallbacks
-    def handle_table(
+    async def handle_table(
         self, table, postgres_size, table_size, forward_chunk, backward_chunk
     ):
         logger.info(
@@ -275,26 +305,19 @@ class Porter(object):
         self.progress.add_table(table, postgres_size, table_size)
 
         if table == "event_search":
-            yield self.handle_search_table(
+            await self.handle_search_table(
                 postgres_size, table_size, forward_chunk, backward_chunk
             )
             return
 
-        if table in (
-            "user_directory",
-            "user_directory_search",
-            "users_who_share_rooms",
-            "users_in_pubic_room",
-        ):
-            # We don't port these tables, as they're a faff and we can regenreate
-            # them anyway.
+        if table in IGNORED_TABLES:
             self.progress.update(table, table_size)  # Mark table as done
             return
 
         if table == "user_directory_stream_pos":
             # We need to make sure there is a single row, `(X, null), as that is
             # what synapse expects to be there.
-            yield self.postgres_store.db.simple_insert(
+            await self.postgres_store.db.simple_insert(
                 table=table, values={"stream_id": None}
             )
             self.progress.update(table, table_size)  # Mark table as done
@@ -335,7 +358,7 @@ class Porter(object):
 
                 return headers, forward_rows, backward_rows
 
-            headers, frows, brows = yield self.sqlite_store.db.runInteraction(
+            headers, frows, brows = await self.sqlite_store.db.runInteraction(
                 "select", r
             )
 
@@ -361,7 +384,7 @@ class Porter(object):
                         },
                     )
 
-                yield self.postgres_store.execute(insert)
+                await self.postgres_store.execute(insert)
 
                 postgres_size += len(rows)
 
@@ -369,8 +392,7 @@ class Porter(object):
             else:
                 return
 
-    @defer.inlineCallbacks
-    def handle_search_table(
+    async def handle_search_table(
         self, postgres_size, table_size, forward_chunk, backward_chunk
     ):
         select = (
@@ -390,7 +412,7 @@ class Porter(object):
 
                 return headers, rows
 
-            headers, rows = yield self.sqlite_store.db.runInteraction("select", r)
+            headers, rows = await self.sqlite_store.db.runInteraction("select", r)
 
             if rows:
                 forward_chunk = rows[-1][0] + 1
@@ -438,7 +460,7 @@ class Porter(object):
                         },
                     )
 
-                yield self.postgres_store.execute(insert)
+                await self.postgres_store.execute(insert)
 
                 postgres_size += len(rows)
 
@@ -447,20 +469,15 @@ class Porter(object):
             else:
                 return
 
-    def setup_db(self, db_config: DatabaseConnectionConfig, engine):
-        db_conn = make_conn(db_config, engine)
-        prepare_database(db_conn, engine, config=None)
-
-        db_conn.commit()
-
-        return db_conn
-
-    @defer.inlineCallbacks
-    def build_db_store(self, db_config: DatabaseConnectionConfig):
+    def build_db_store(
+        self, db_config: DatabaseConnectionConfig, allow_outdated_version: bool = False,
+    ):
         """Builds and returns a database store using the provided configuration.
 
         Args:
-            config: The database configuration
+            db_config: The database configuration
+            allow_outdated_version: True to suppress errors about the database server
+                version being too old to run a complete synapse
 
         Returns:
             The built Store object.
@@ -468,24 +485,23 @@ class Porter(object):
         self.progress.set_state("Preparing %s" % db_config.config["name"])
 
         engine = create_engine(db_config.config)
-        conn = self.setup_db(db_config, engine)
 
         hs = MockHomeserver(self.hs_config)
 
-        store = Store(Database(hs, db_config, engine), conn, hs)
-
-        yield store.db.runInteraction(
-            "%s_engine.check_database" % db_config.config["name"],
-            engine.check_database,
-        )
+        with make_conn(db_config, engine) as db_conn:
+            engine.check_database(
+                db_conn, allow_outdated_version=allow_outdated_version
+            )
+            prepare_database(db_conn, engine, config=self.hs_config)
+            store = Store(Database(hs, db_config, engine), db_conn, hs)
+            db_conn.commit()
 
         return store
 
-    @defer.inlineCallbacks
-    def run_background_updates_on_postgres(self):
+    async def run_background_updates_on_postgres(self):
         # Manually apply all background updates on the PostgreSQL database.
         postgres_ready = (
-            yield self.postgres_store.db.updates.has_completed_background_updates()
+            await self.postgres_store.db.updates.has_completed_background_updates()
         )
 
         if not postgres_ready:
@@ -494,35 +510,44 @@ class Porter(object):
             self.progress.set_state("Running background updates on PostgreSQL")
 
         while not postgres_ready:
-            yield self.postgres_store.db.updates.do_next_background_update(100)
-            postgres_ready = yield (
+            await self.postgres_store.db.updates.do_next_background_update(100)
+            postgres_ready = await (
                 self.postgres_store.db.updates.has_completed_background_updates()
             )
 
-    @defer.inlineCallbacks
-    def run(self):
+    async def run(self):
+        """Ports the SQLite database to a PostgreSQL database.
+
+        When a fatal error is met, its message is assigned to the global "end_error"
+        variable. When this error comes with a stacktrace, its exec_info is assigned to
+        the global "end_error_exec_info" variable.
+        """
+        global end_error
+
         try:
-            self.sqlite_store = yield self.build_db_store(
-                DatabaseConnectionConfig("master-sqlite", self.sqlite_config)
+            # we allow people to port away from outdated versions of sqlite.
+            self.sqlite_store = self.build_db_store(
+                DatabaseConnectionConfig("master-sqlite", self.sqlite_config),
+                allow_outdated_version=True,
             )
 
             # Check if all background updates are done, abort if not.
             updates_complete = (
-                yield self.sqlite_store.db.updates.has_completed_background_updates()
+                await self.sqlite_store.db.updates.has_completed_background_updates()
             )
             if not updates_complete:
-                sys.stderr.write(
+                end_error = (
                     "Pending background updates exist in the SQLite3 database."
                     " Please start Synapse again and wait until every update has finished"
                     " before running this script.\n"
                 )
-                defer.returnValue(None)
+                return
 
-            self.postgres_store = yield self.build_db_store(
+            self.postgres_store = self.build_db_store(
                 self.hs_config.get_single_database()
             )
 
-            yield self.run_background_updates_on_postgres()
+            await self.run_background_updates_on_postgres()
 
             self.progress.set_state("Creating port tables")
 
@@ -550,22 +575,22 @@ class Porter(object):
                 )
 
             try:
-                yield self.postgres_store.db.runInteraction("alter_table", alter_table)
+                await self.postgres_store.db.runInteraction("alter_table", alter_table)
             except Exception:
                 # On Error Resume Next
                 pass
 
-            yield self.postgres_store.db.runInteraction(
+            await self.postgres_store.db.runInteraction(
                 "create_port_table", create_port_table
             )
 
             # Step 2. Get tables.
             self.progress.set_state("Fetching tables")
-            sqlite_tables = yield self.sqlite_store.db.simple_select_onecol(
+            sqlite_tables = await self.sqlite_store.db.simple_select_onecol(
                 table="sqlite_master", keyvalues={"type": "table"}, retcol="name"
             )
 
-            postgres_tables = yield self.postgres_store.db.simple_select_onecol(
+            postgres_tables = await self.postgres_store.db.simple_select_onecol(
                 table="information_schema.tables",
                 keyvalues={},
                 retcol="distinct table_name",
@@ -576,28 +601,34 @@ class Porter(object):
 
             # Step 3. Figure out what still needs copying
             self.progress.set_state("Checking on port progress")
-            setup_res = yield defer.gatherResults(
-                [
-                    self.setup_table(table)
-                    for table in tables
-                    if table not in ["schema_version", "applied_schema_deltas"]
-                    and not table.startswith("sqlite_")
-                ],
-                consumeErrors=True,
+            setup_res = await make_deferred_yieldable(
+                defer.gatherResults(
+                    [
+                        run_in_background(self.setup_table, table)
+                        for table in tables
+                        if table not in ["schema_version", "applied_schema_deltas"]
+                        and not table.startswith("sqlite_")
+                    ],
+                    consumeErrors=True,
+                )
             )
 
             # Step 4. Do the copying.
             self.progress.set_state("Copying to postgres")
-            yield defer.gatherResults(
-                [self.handle_table(*res) for res in setup_res], consumeErrors=True
+            await make_deferred_yieldable(
+                defer.gatherResults(
+                    [run_in_background(self.handle_table, *res) for res in setup_res],
+                    consumeErrors=True,
+                )
             )
 
             # Step 5. Do final post-processing
-            yield self._setup_state_group_id_seq()
+            await self._setup_state_group_id_seq()
 
             self.progress.done()
-        except Exception:
+        except Exception as e:
             global end_error_exec_info
+            end_error = e
             end_error_exec_info = sys.exc_info()
             logger.exception("")
         finally:
@@ -616,7 +647,7 @@ class Porter(object):
                 return bool(col)
             if isinstance(col, bytes):
                 return bytearray(col)
-            elif isinstance(col, string_types) and "\0" in col:
+            elif isinstance(col, str) and "\0" in col:
                 logger.warning(
                     "DROPPING ROW: NUL value in table %s col %s: %r",
                     table,
@@ -637,8 +668,7 @@ class Porter(object):
 
         return outrows
 
-    @defer.inlineCallbacks
-    def _setup_sent_transactions(self):
+    async def _setup_sent_transactions(self):
         # Only save things from the last day
         yesterday = int(time.time() * 1000) - 86400000
 
@@ -659,7 +689,7 @@ class Porter(object):
 
             return headers, [r for r in rows if r[ts_ind] < yesterday]
 
-        headers, rows = yield self.sqlite_store.db.runInteraction("select", r)
+        headers, rows = await self.sqlite_store.db.runInteraction("select", r)
 
         rows = self._convert_rows("sent_transactions", headers, rows)
 
@@ -672,7 +702,7 @@ class Porter(object):
                     txn, "sent_transactions", headers[1:], rows
                 )
 
-            yield self.postgres_store.execute(insert)
+            await self.postgres_store.execute(insert)
         else:
             max_inserted_rowid = 0
 
@@ -689,10 +719,10 @@ class Porter(object):
             else:
                 return 1
 
-        next_chunk = yield self.sqlite_store.execute(get_start_id)
+        next_chunk = await self.sqlite_store.execute(get_start_id)
         next_chunk = max(max_inserted_rowid + 1, next_chunk)
 
-        yield self.postgres_store.db.simple_insert(
+        await self.postgres_store.db.simple_insert(
             table="port_from_sqlite3",
             values={
                 "table_name": "sent_transactions",
@@ -708,46 +738,49 @@ class Porter(object):
             (size,) = txn.fetchone()
             return int(size)
 
-        remaining_count = yield self.sqlite_store.execute(get_sent_table_size)
+        remaining_count = await self.sqlite_store.execute(get_sent_table_size)
 
         total_count = remaining_count + inserted_rows
 
-        defer.returnValue((next_chunk, inserted_rows, total_count))
+        return next_chunk, inserted_rows, total_count
 
-    @defer.inlineCallbacks
-    def _get_remaining_count_to_port(self, table, forward_chunk, backward_chunk):
-        frows = yield self.sqlite_store.execute_sql(
+    async def _get_remaining_count_to_port(self, table, forward_chunk, backward_chunk):
+        frows = await self.sqlite_store.execute_sql(
             "SELECT count(*) FROM %s WHERE rowid >= ?" % (table,), forward_chunk
         )
 
-        brows = yield self.sqlite_store.execute_sql(
+        brows = await self.sqlite_store.execute_sql(
             "SELECT count(*) FROM %s WHERE rowid <= ?" % (table,), backward_chunk
         )
 
-        defer.returnValue(frows[0][0] + brows[0][0])
+        return frows[0][0] + brows[0][0]
 
-    @defer.inlineCallbacks
-    def _get_already_ported_count(self, table):
-        rows = yield self.postgres_store.execute_sql(
+    async def _get_already_ported_count(self, table):
+        rows = await self.postgres_store.execute_sql(
             "SELECT count(*) FROM %s" % (table,)
         )
 
-        defer.returnValue(rows[0][0])
+        return rows[0][0]
 
-    @defer.inlineCallbacks
-    def _get_total_count_to_port(self, table, forward_chunk, backward_chunk):
-        remaining, done = yield defer.gatherResults(
-            [
-                self._get_remaining_count_to_port(table, forward_chunk, backward_chunk),
-                self._get_already_ported_count(table),
-            ],
-            consumeErrors=True,
+    async def _get_total_count_to_port(self, table, forward_chunk, backward_chunk):
+        remaining, done = await make_deferred_yieldable(
+            defer.gatherResults(
+                [
+                    run_in_background(
+                        self._get_remaining_count_to_port,
+                        table,
+                        forward_chunk,
+                        backward_chunk,
+                    ),
+                    run_in_background(self._get_already_ported_count, table),
+                ],
+            )
         )
 
         remaining = int(remaining) if remaining else 0
         done = int(done) if done else 0
 
-        defer.returnValue((done, remaining + done))
+        return done, remaining + done
 
     def _setup_state_group_id_seq(self):
         def r(txn):
@@ -1013,7 +1046,12 @@ if __name__ == "__main__":
             hs_config=config,
         )
 
-        reactor.callWhenRunning(porter.run)
+        @defer.inlineCallbacks
+        def run():
+            with LoggingContext("synapse_port_db_run"):
+                yield defer.ensureDeferred(porter.run())
+
+        reactor.callWhenRunning(run)
 
         reactor.run()
 
@@ -1022,7 +1060,11 @@ if __name__ == "__main__":
     else:
         start()
 
-    if end_error_exec_info:
-        exc_type, exc_value, exc_traceback = end_error_exec_info
-        traceback.print_exception(exc_type, exc_value, exc_traceback)
+    if end_error:
+        if end_error_exec_info:
+            exc_type, exc_value, exc_traceback = end_error_exec_info
+            traceback.print_exception(exc_type, exc_value, exc_traceback)
+
+        sys.stderr.write(end_error)
+
         sys.exit(5)

setup.cfg

@@ -31,7 +31,7 @@ sections=FUTURE,STDLIB,COMPAT,THIRDPARTY,TWISTED,FIRSTPARTY,TESTS,LOCALFOLDER
 default_section=THIRDPARTY
 known_first_party = synapse
 known_tests=tests
-known_compat = mock,six
+known_compat = mock
 known_twisted=twisted,OpenSSL
 multi_line_output=3
 include_trailing_comma=true

setup.py

@@ -114,6 +114,7 @@ setup(
         "Programming Language :: Python :: 3.5",
         "Programming Language :: Python :: 3.6",
         "Programming Language :: Python :: 3.7",
+        "Programming Language :: Python :: 3.8",
     ],
     scripts=["synctl"] + glob.glob("scripts/*"),
     cmdclass={"test": TestCommand},

snap/snapcraft.yaml

@@ -1,20 +1,31 @@
 name: matrix-synapse
 base: core18
-version: git 
+version: git
 summary: Reference Matrix homeserver
 description: |
   Synapse is the reference Matrix homeserver.
   Matrix is a federated and decentralised instant messaging and VoIP system.
 
-grade: stable 
-confinement: strict 
+grade: stable
+confinement: strict
 
 apps:
-  matrix-synapse: 
+  matrix-synapse:
     command: synctl --no-daemonize start $SNAP_COMMON/homeserver.yaml
     stop-command: synctl -c $SNAP_COMMON stop
     plugs: [network-bind, network]
-    daemon: simple 
+    daemon: simple
+  hash-password:
+    command: hash_password
+  generate-config:
+    command: generate_config
+  generate-signing-key:
+    command: generate_signing_key.py
+  register-new-matrix-user:
+    command: register_new_matrix_user
+    plugs: [network]
+  synctl:
+    command: synctl
 parts:
   matrix-synapse:
     source: .
@@ -22,6 +33,10 @@ parts:
     python-version: python3
     python-packages:
       - '.[all]'
+      - pip
+      - setuptools
+      - setuptools-scm
+      - wheel
     build-packages:
       - libffi-dev
       - libturbojpeg0-dev

stubs/sortedcontainers/__init__.pyi

@@ -0,0 +1,13 @@
+from .sorteddict import (
+    SortedDict,
+    SortedKeysView,
+    SortedItemsView,
+    SortedValuesView,
+)
+
+__all__ = [
+    "SortedDict",
+    "SortedKeysView",
+    "SortedItemsView",
+    "SortedValuesView",
+]

stubs/sortedcontainers/sorteddict.pyi

@@ -0,0 +1,124 @@
+# stub for SortedDict. This is a lightly edited copy of
+# https://github.com/grantjenks/python-sortedcontainers/blob/eea42df1f7bad2792e8da77335ff888f04b9e5ae/sortedcontainers/sorteddict.pyi
+# (from https://github.com/grantjenks/python-sortedcontainers/pull/107)
+
+from typing import (
+    Any,
+    Callable,
+    Dict,
+    Hashable,
+    Iterator,
+    Iterable,
+    ItemsView,
+    KeysView,
+    List,
+    Mapping,
+    Optional,
+    Sequence,
+    Type,
+    TypeVar,
+    Tuple,
+    Union,
+    ValuesView,
+    overload,
+)
+
+_T = TypeVar("_T")
+_S = TypeVar("_S")
+_T_h = TypeVar("_T_h", bound=Hashable)
+_KT = TypeVar("_KT", bound=Hashable)  # Key type.
+_VT = TypeVar("_VT")  # Value type.
+_KT_co = TypeVar("_KT_co", covariant=True, bound=Hashable)
+_VT_co = TypeVar("_VT_co", covariant=True)
+_SD = TypeVar("_SD", bound=SortedDict)
+_Key = Callable[[_T], Any]
+
+class SortedDict(Dict[_KT, _VT]):
+    @overload
+    def __init__(self, **kwargs: _VT) -> None: ...
+    @overload
+    def __init__(self, __map: Mapping[_KT, _VT], **kwargs: _VT) -> None: ...
+    @overload
+    def __init__(
+        self, __iterable: Iterable[Tuple[_KT, _VT]], **kwargs: _VT
+    ) -> None: ...
+    @overload
+    def __init__(self, __key: _Key[_KT], **kwargs: _VT) -> None: ...
+    @overload
+    def __init__(
+        self, __key: _Key[_KT], __map: Mapping[_KT, _VT], **kwargs: _VT
+    ) -> None: ...
+    @overload
+    def __init__(
+        self, __key: _Key[_KT], __iterable: Iterable[Tuple[_KT, _VT]], **kwargs: _VT
+    ) -> None: ...
+    @property
+    def key(self) -> Optional[_Key[_KT]]: ...
+    @property
+    def iloc(self) -> SortedKeysView[_KT]: ...
+    def clear(self) -> None: ...
+    def __delitem__(self, key: _KT) -> None: ...
+    def __iter__(self) -> Iterator[_KT]: ...
+    def __reversed__(self) -> Iterator[_KT]: ...
+    def __setitem__(self, key: _KT, value: _VT) -> None: ...
+    def _setitem(self, key: _KT, value: _VT) -> None: ...
+    def copy(self: _SD) -> _SD: ...
+    def __copy__(self: _SD) -> _SD: ...
+    @classmethod
+    @overload
+    def fromkeys(cls, seq: Iterable[_T_h]) -> SortedDict[_T_h, None]: ...
+    @classmethod
+    @overload
+    def fromkeys(cls, seq: Iterable[_T_h], value: _S) -> SortedDict[_T_h, _S]: ...
+    def keys(self) -> SortedKeysView[_KT]: ...
+    def items(self) -> SortedItemsView[_KT, _VT]: ...
+    def values(self) -> SortedValuesView[_VT]: ...
+    @overload
+    def pop(self, key: _KT) -> _VT: ...
+    @overload
+    def pop(self, key: _KT, default: _T = ...) -> Union[_VT, _T]: ...
+    def popitem(self, index: int = ...) -> Tuple[_KT, _VT]: ...
+    def peekitem(self, index: int = ...) -> Tuple[_KT, _VT]: ...
+    def setdefault(self, key: _KT, default: Optional[_VT] = ...) -> _VT: ...
+    @overload
+    def update(self, __map: Mapping[_KT, _VT], **kwargs: _VT) -> None: ...
+    @overload
+    def update(self, __iterable: Iterable[Tuple[_KT, _VT]], **kwargs: _VT) -> None: ...
+    @overload
+    def update(self, **kwargs: _VT) -> None: ...
+    def __reduce__(
+        self,
+    ) -> Tuple[
+        Type[SortedDict[_KT, _VT]], Tuple[Callable[[_KT], Any], List[Tuple[_KT, _VT]]],
+    ]: ...
+    def __repr__(self) -> str: ...
+    def _check(self) -> None: ...
+    def islice(
+        self, start: Optional[int] = ..., stop: Optional[int] = ..., reverse=bool,
+    ) -> Iterator[_KT]: ...
+    def bisect_left(self, value: _KT) -> int: ...
+    def bisect_right(self, value: _KT) -> int: ...
+
+class SortedKeysView(KeysView[_KT_co], Sequence[_KT_co]):
+    @overload
+    def __getitem__(self, index: int) -> _KT_co: ...
+    @overload
+    def __getitem__(self, index: slice) -> List[_KT_co]: ...
+    def __delitem__(self, index: Union[int, slice]) -> None: ...
+
+class SortedItemsView(  # type: ignore
+    ItemsView[_KT_co, _VT_co], Sequence[Tuple[_KT_co, _VT_co]]
+):
+    def __iter__(self) -> Iterator[Tuple[_KT_co, _VT_co]]: ...
+    @overload
+    def __getitem__(self, index: int) -> Tuple[_KT_co, _VT_co]: ...
+    @overload
+    def __getitem__(self, index: slice) -> List[Tuple[_KT_co, _VT_co]]: ...
+    def __delitem__(self, index: Union[int, slice]) -> None: ...
+
+class SortedValuesView(ValuesView[_VT_co], Sequence[_VT_co]):
+    @overload
+    def __getitem__(self, index: int) -> _VT_co: ...
+    @overload
+    def __getitem__(self, index: slice) -> List[_VT_co]: ...
+    def __delitem__(self, index: Union[int, slice]) -> None: ...

stubs/txredisapi.pyi

@@ -0,0 +1,43 @@
+# -*- coding: utf-8 -*-
+# Copyright 2020 The Matrix.org Foundation C.I.C.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Contains *incomplete* type hints for txredisapi.
+"""
+
+from typing import List, Optional, Union
+
+class RedisProtocol:
+    def publish(self, channel: str, message: bytes): ...
+
+class SubscriberProtocol:
+    password: Optional[str]
+    def subscribe(self, channels: Union[str, List[str]]): ...
+    def connectionMade(self): ...
+    def connectionLost(self, reason): ...
+
+def lazyConnection(
+    host: str = ...,
+    port: int = ...,
+    dbid: Optional[int] = ...,
+    reconnect: bool = ...,
+    charset: str = ...,
+    password: Optional[str] = ...,
+    connectTimeout: Optional[int] = ...,
+    replyTimeout: Optional[int] = ...,
+    convertNumbers: bool = ...,
+) -> RedisProtocol: ...
+
+class SubscriberFactory:
+    def buildProtocol(self, addr): ...

synapse/__init__.py

@@ -36,7 +36,7 @@ try:
 except ImportError:
     pass
 
-__version__ = "1.8.0"
+__version__ = "1.16.0rc1"
 
 if bool(os.environ.get("SYNAPSE_TEST_PATCH_LOG_CONTEXTS", False)):
     # We import here so that we don't have to install a bunch of deps when

synapse/_scripts/register_new_matrix_user.py

@@ -23,8 +23,6 @@ import hmac
 import logging
 import sys
 
-from six.moves import input
-
 import requests as _requests
 import yaml
 

synapse/api/auth.py

@@ -14,29 +14,29 @@
 # limitations under the License.
 
 import logging
-from typing import Dict, Tuple
-
-from six import itervalues
+from typing import Optional
 
 import pymacaroons
 from netaddr import IPAddress
 
 from twisted.internet import defer
+from twisted.web.server import Request
 
 import synapse.logging.opentracing as opentracing
 import synapse.types
 from synapse import event_auth
-from synapse.api.constants import EventTypes, LimitBlockingTypes, Membership, UserTypes
+from synapse.api.auth_blocking import AuthBlocking
+from synapse.api.constants import EventTypes, Membership
 from synapse.api.errors import (
     AuthError,
     Codes,
     InvalidClientTokenError,
     MissingClientTokenError,
-    ResourceLimitError,
 )
-from synapse.config.server import is_threepid_reserved
-from synapse.types import UserID
-from synapse.util.caches import CACHE_SIZE_FACTOR, register_cache
+from synapse.api.room_versions import KNOWN_ROOM_VERSIONS
+from synapse.events import EventBase
+from synapse.types import StateMap, UserID
+from synapse.util.caches import register_cache
 from synapse.util.caches.lrucache import LruCache
 from synapse.util.metrics import Measure
 
@@ -72,38 +72,58 @@ class Auth(object):
         self.store = hs.get_datastore()
         self.state = hs.get_state_handler()
 
-        self.token_cache = LruCache(CACHE_SIZE_FACTOR * 10000)
+        self.token_cache = LruCache(10000)
         register_cache("cache", "token_cache", self.token_cache)
 
+        self._auth_blocking = AuthBlocking(self.hs)
+
         self._account_validity = hs.config.account_validity
+        self._track_appservice_user_ips = hs.config.track_appservice_user_ips
+        self._macaroon_secret_key = hs.config.macaroon_secret_key
 
     @defer.inlineCallbacks
-    def check_from_context(self, room_version, event, context, do_sig_check=True):
+    def check_from_context(self, room_version: str, event, context, do_sig_check=True):
         prev_state_ids = yield context.get_prev_state_ids()
         auth_events_ids = yield self.compute_auth_events(
             event, prev_state_ids, for_verification=True
         )
         auth_events = yield self.store.get_events(auth_events_ids)
-        auth_events = {(e.type, e.state_key): e for e in itervalues(auth_events)}
+        auth_events = {(e.type, e.state_key): e for e in auth_events.values()}
+
+        room_version_obj = KNOWN_ROOM_VERSIONS[room_version]
         event_auth.check(
-            room_version, event, auth_events=auth_events, do_sig_check=do_sig_check
+            room_version_obj, event, auth_events=auth_events, do_sig_check=do_sig_check
         )
 
     @defer.inlineCallbacks
-    def check_joined_room(self, room_id, user_id, current_state=None):
-        """Check if the user is currently joined in the room
+    def check_user_in_room(
+        self,
+        room_id: str,
+        user_id: str,
+        current_state: Optional[StateMap[EventBase]] = None,
+        allow_departed_users: bool = False,
+    ):
+        """Check if the user is in the room, or was at some point.
         Args:
-            room_id(str): The room to check.
-            user_id(str): The user to check.
-            current_state(dict): Optional map of the current state of the room.
+            room_id: The room to check.
+
+            user_id: The user to check.
+
+            current_state: Optional map of the current state of the room.
                 If provided then that map is used to check whether they are a
                 member of the room. Otherwise the current membership is
                 loaded from the database.
+
+            allow_departed_users: if True, accept users that were previously
+                members but have now departed.
+
         Raises:
-            AuthError if the user is not in the room.
+            AuthError if the user is/was not in the room.
         Returns:
-            A deferred membership event for the user if the user is in
-            the room.
+            Deferred[Optional[EventBase]]:
+                Membership event for the user if the user was in the
+                room. This will be the join event if they are currently joined to
+                the room. This will be the leave event if they have left the room.
         """
         if current_state:
             member = current_state.get((EventTypes.Member, user_id), None)
@@ -111,37 +131,19 @@ class Auth(object):
             member = yield self.state.get_current_state(
                 room_id=room_id, event_type=EventTypes.Member, state_key=user_id
             )
-
-        self._check_joined_room(member, user_id, room_id)
-        return member
-
-    @defer.inlineCallbacks
-    def check_user_was_in_room(self, room_id, user_id):
-        """Check if the user was in the room at some point.
-        Args:
-            room_id(str): The room to check.
-            user_id(str): The user to check.
-        Raises:
-            AuthError if the user was never in the room.
-        Returns:
-            A deferred membership event for the user if the user was in the
-            room. This will be the join event if they are currently joined to
-            the room. This will be the leave event if they have left the room.
-        """
-        member = yield self.state.get_current_state(
-            room_id=room_id, event_type=EventTypes.Member, state_key=user_id
-        )
         membership = member.membership if member else None
 
-        if membership not in (Membership.JOIN, Membership.LEAVE):
-            raise AuthError(403, "User %s not in room %s" % (user_id, room_id))
+        if membership == Membership.JOIN:
+            return member
 
-        if membership == Membership.LEAVE:
+        # XXX this looks totally bogus. Why do we not allow users who have been banned,
+        # or those who were members previously and have been re-invited?
+        if allow_departed_users and membership == Membership.LEAVE:
             forgot = yield self.store.did_forget(user_id, room_id)
-            if forgot:
-                raise AuthError(403, "User %s not in room %s" % (user_id, room_id))
+            if not forgot:
+                return member
 
-        return member
+        raise AuthError(403, "User %s not in room %s" % (user_id, room_id))
 
     @defer.inlineCallbacks
     def check_host_in_room(self, room_id, host):
@@ -149,12 +151,6 @@ class Auth(object):
             latest_event_ids = yield self.store.is_host_joined(room_id, host)
             return latest_event_ids
 
-    def _check_joined_room(self, member, user_id, room_id):
-        if not member or member.membership != Membership.JOIN:
-            raise AuthError(
-                403, "User %s not in room %s (%s)" % (user_id, room_id, repr(member))
-            )
-
     def can_federate(self, event, auth_events):
         creation_event = auth_events.get((EventTypes.Create, ""))
 
@@ -165,19 +161,25 @@ class Auth(object):
 
     @defer.inlineCallbacks
     def get_user_by_req(
-        self, request, allow_guest=False, rights="access", allow_expired=False
+        self,
+        request: Request,
+        allow_guest: bool = False,
+        rights: str = "access",
+        allow_expired: bool = False,
     ):
         """ Get a registered user's ID.
 
         Args:
-            request - An HTTP request with an access_token query parameter.
-            allow_expired - Whether to allow the request through even if the account is
-                expired. If true, Synapse will still require an access token to be
-                provided but won't check if the account it belongs to has expired. This
-                works thanks to /login delivering access tokens regardless of accounts'
-                expiration.
+            request: An HTTP request with an access_token query parameter.
+            allow_guest: If False, will raise an AuthError if the user making the
+                request is a guest.
+            rights: The operation being performed; the access token must allow this
+            allow_expired: If True, allow the request through even if the account
+                is expired, or session token lifetime has ended. Note that
+                /login will deliver access tokens regardless of expiration.
+
         Returns:
-            defer.Deferred: resolves to a ``synapse.types.Requester`` object
+            defer.Deferred: resolves to a `synapse.types.Requester` object
         Raises:
             InvalidClientCredentialsError if no user by that token exists or the token
                 is invalid.
@@ -197,7 +199,7 @@ class Auth(object):
                 opentracing.set_tag("authenticated_entity", user_id)
                 opentracing.set_tag("appservice_id", app_service.id)
 
-                if ip_addr and self.hs.config.track_appservice_user_ips:
+                if ip_addr and self._track_appservice_user_ips:
                     yield self.store.insert_client_ip(
                         user_id=user_id,
                         access_token=access_token,
@@ -208,7 +210,9 @@ class Auth(object):
 
                 return synapse.types.create_requester(user_id, app_service=app_service)
 
-            user_info = yield self.get_user_by_access_token(access_token, rights)
+            user_info = yield self.get_user_by_access_token(
+                access_token, rights, allow_expired=allow_expired
+            )
             user = user_info["user"]
             token_id = user_info["token_id"]
             is_guest = user_info["is_guest"]
@@ -283,13 +287,17 @@ class Auth(object):
         return user_id, app_service
 
     @defer.inlineCallbacks
-    def get_user_by_access_token(self, token, rights="access"):
+    def get_user_by_access_token(
+        self, token: str, rights: str = "access", allow_expired: bool = False,
+    ):
         """ Validate access token and get user_id from it
 
         Args:
-            token (str): The access token to get the user by.
-            rights (str): The operation being performed; the access token must
-                allow this.
+            token: The access token to get the user by
+            rights: The operation being performed; the access token must
+                allow this
+            allow_expired: If False, raises an InvalidClientTokenError
+                if the token is expired
         Returns:
             Deferred[dict]: dict that includes:
                `user` (UserID)
@@ -297,8 +305,10 @@ class Auth(object):
                `token_id` (int|None): access token id. May be None if guest
                `device_id` (str|None): device corresponding to access token
         Raises:
+            InvalidClientTokenError if a user by that token exists, but the token is
+                expired
             InvalidClientCredentialsError if no user by that token exists or the token
-                is invalid.
+                is invalid
         """
 
         if rights == "access":
@@ -307,7 +317,8 @@ class Auth(object):
             if r:
                 valid_until_ms = r["valid_until_ms"]
                 if (
-                    valid_until_ms is not None
+                    not allow_expired
+                    and valid_until_ms is not None
                     and valid_until_ms < self.clock.time_msec()
                 ):
                     # there was a valid access token, but it has expired.
@@ -460,7 +471,7 @@ class Auth(object):
         # access_tokens include a nonce for uniqueness: any value is acceptable
         v.satisfy_general(lambda c: c.startswith("nonce = "))
 
-        v.verify(macaroon, self.hs.config.macaroon_secret_key)
+        v.verify(macaroon, self._macaroon_secret_key)
 
     def _verify_expiry(self, caveat):
         prefix = "time < "
@@ -497,22 +508,19 @@ class Auth(object):
         request.authenticated_entity = service.sender
         return defer.succeed(service)
 
-    def is_server_admin(self, user):
+    async def is_server_admin(self, user: UserID) -> bool:
         """ Check if the given user is a local server admin.
 
         Args:
-            user (UserID): user to check
+            user: user to check
 
         Returns:
-            bool: True if the user is an admin
+            True if the user is an admin
         """
-        return self.store.is_server_admin(user)
+        return await self.store.is_server_admin(user)
 
     def compute_auth_events(
-        self,
-        event,
-        current_state_ids: Dict[Tuple[str, str], str],
-        for_verification: bool = False,
+        self, event, current_state_ids: StateMap[str], for_verification: bool = False,
     ):
         """Given an event and current state return the list of event IDs used
         to auth an event.
@@ -546,27 +554,26 @@ class Auth(object):
 
         return defer.succeed(auth_ids)
 
-    @defer.inlineCallbacks
-    def check_can_change_room_list(self, room_id, user):
-        """Check if the user is allowed to edit the room's entry in the
+    async def check_can_change_room_list(self, room_id: str, user: UserID):
+        """Determine whether the user is allowed to edit the room's entry in the
         published room list.
 
         Args:
-            room_id (str)
-            user (UserID)
+            room_id
+            user
         """
 
-        is_admin = yield self.is_server_admin(user)
+        is_admin = await self.is_server_admin(user)
         if is_admin:
             return True
 
         user_id = user.to_string()
-        yield self.check_joined_room(room_id, user_id)
+        await self.check_user_in_room(room_id, user_id)
 
         # We currently require the user is a "moderator" in the room. We do this
         # by checking if they would (theoretically) be able to change the
-        # m.room.aliases events
-        power_level_event = yield self.state.get_current_state(
+        # m.room.canonical_alias events
+        power_level_event = await self.state.get_current_state(
             room_id, EventTypes.PowerLevels, ""
         )
 
@@ -575,19 +582,14 @@ class Auth(object):
             auth_events[(EventTypes.PowerLevels, "")] = power_level_event
 
         send_level = event_auth.get_send_level(
-            EventTypes.Aliases, "", power_level_event
+            EventTypes.CanonicalAlias, "", power_level_event
         )
         user_level = event_auth.get_user_power_level(user_id, auth_events)
 
-        if user_level < send_level:
-            raise AuthError(
-                403,
-                "This server requires you to be a moderator in the room to"
-                " edit its room list entry",
-            )
+        return user_level >= send_level
 
     @staticmethod
-    def has_access_token(request):
+    def has_access_token(request: Request):
         """Checks if the request has an access_token.
 
         Returns:
@@ -598,7 +600,7 @@ class Auth(object):
         return bool(query_params) or bool(auth_headers)
 
     @staticmethod
-    def get_access_token_from_request(request):
+    def get_access_token_from_request(request: Request):
         """Extracts the access_token from the request.
 
         Args:
@@ -634,10 +636,18 @@ class Auth(object):
             return query_params[0].decode("ascii")
 
     @defer.inlineCallbacks
-    def check_in_room_or_world_readable(self, room_id, user_id):
+    def check_user_in_room_or_world_readable(
+        self, room_id: str, user_id: str, allow_departed_users: bool = False
+    ):
         """Checks that the user is or was in the room or the room is world
         readable. If it isn't then an exception is raised.
 
+        Args:
+            room_id: room to check
+            user_id: user to check
+            allow_departed_users: if True, accept users that were previously
+                members but have now departed
+
         Returns:
             Deferred[tuple[str, str|None]]: Resolves to the current membership of
                 the user in the room and the membership event ID of the user. If
@@ -646,12 +656,14 @@ class Auth(object):
         """
 
         try:
-            # check_user_was_in_room will return the most recent membership
+            # check_user_in_room will return the most recent membership
             # event for the user if:
             #  * The user is a non-guest user, and was ever in the room
             #  * The user is a guest user, and has joined the room
             # else it will throw.
-            member_event = yield self.check_user_was_in_room(room_id, user_id)
+            member_event = yield self.check_user_in_room(
+                room_id, user_id, allow_departed_users=allow_departed_users
+            )
             return member_event.membership, member_event.event_id
         except AuthError:
             visibility = yield self.state.get_current_state(
@@ -663,74 +675,10 @@ class Auth(object):
             ):
                 return Membership.JOIN, None
             raise AuthError(
-                403, "Guest access not allowed", errcode=Codes.GUEST_ACCESS_FORBIDDEN
-            )
-
-    @defer.inlineCallbacks
-    def check_auth_blocking(self, user_id=None, threepid=None, user_type=None):
-        """Checks if the user should be rejected for some external reason,
-        such as monthly active user limiting or global disable flag
-
-        Args:
-            user_id(str|None): If present, checks for presence against existing
-                MAU cohort
-
-            threepid(dict|None): If present, checks for presence against configured
-                reserved threepid. Used in cases where the user is trying register
-                with a MAU blocked server, normally they would be rejected but their
-                threepid is on the reserved list. user_id and
-                threepid should never be set at the same time.
-
-            user_type(str|None): If present, is used to decide whether to check against
-                certain blocking reasons like MAU.
-        """
-
-        # Never fail an auth check for the server notices users or support user
-        # This can be a problem where event creation is prohibited due to blocking
-        if user_id is not None:
-            if user_id == self.hs.config.server_notices_mxid:
-                return
-            if (yield self.store.is_support_user(user_id)):
-                return
-
-        if self.hs.config.hs_disabled:
-            raise ResourceLimitError(
                 403,
-                self.hs.config.hs_disabled_message,
-                errcode=Codes.RESOURCE_LIMIT_EXCEEDED,
-                admin_contact=self.hs.config.admin_contact,
-                limit_type=LimitBlockingTypes.HS_DISABLED,
+                "User %s not in room %s, and room previews are disabled"
+                % (user_id, room_id),
             )
-        if self.hs.config.limit_usage_by_mau is True:
-            assert not (user_id and threepid)
 
-            # If the user is already part of the MAU cohort or a trial user
-            if user_id:
-                timestamp = yield self.store.user_last_seen_monthly_active(user_id)
-                if timestamp:
-                    return
-
-                is_trial = yield self.store.is_trial_user(user_id)
-                if is_trial:
-                    return
-            elif threepid:
-                # If the user does not exist yet, but is signing up with a
-                # reserved threepid then pass auth check
-                if is_threepid_reserved(
-                    self.hs.config.mau_limits_reserved_threepids, threepid
-                ):
-                    return
-            elif user_type == UserTypes.SUPPORT:
-                # If the user does not exist yet and is of type "support",
-                # allow registration. Support users are excluded from MAU checks.
-                return
-            # Else if there is no room in the MAU bucket, bail
-            current_mau = yield self.store.get_monthly_active_count()
-            if current_mau >= self.hs.config.max_mau_value:
-                raise ResourceLimitError(
-                    403,
-                    "Monthly Active User Limit Exceeded",
-                    admin_contact=self.hs.config.admin_contact,
-                    errcode=Codes.RESOURCE_LIMIT_EXCEEDED,
-                    limit_type=LimitBlockingTypes.MONTHLY_ACTIVE_USER,
-                )
+    def check_auth_blocking(self, *args, **kwargs):
+        return self._auth_blocking.check_auth_blocking(*args, **kwargs)

synapse/api/auth_blocking.py

@@ -0,0 +1,104 @@
+# -*- coding: utf-8 -*-
+# Copyright 2020 The Matrix.org Foundation C.I.C.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import logging
+
+from twisted.internet import defer
+
+from synapse.api.constants import LimitBlockingTypes, UserTypes
+from synapse.api.errors import Codes, ResourceLimitError
+from synapse.config.server import is_threepid_reserved
+
+logger = logging.getLogger(__name__)
+
+
+class AuthBlocking(object):
+    def __init__(self, hs):
+        self.store = hs.get_datastore()
+
+        self._server_notices_mxid = hs.config.server_notices_mxid
+        self._hs_disabled = hs.config.hs_disabled
+        self._hs_disabled_message = hs.config.hs_disabled_message
+        self._admin_contact = hs.config.admin_contact
+        self._max_mau_value = hs.config.max_mau_value
+        self._limit_usage_by_mau = hs.config.limit_usage_by_mau
+        self._mau_limits_reserved_threepids = hs.config.mau_limits_reserved_threepids
+
+    @defer.inlineCallbacks
+    def check_auth_blocking(self, user_id=None, threepid=None, user_type=None):
+        """Checks if the user should be rejected for some external reason,
+        such as monthly active user limiting or global disable flag
+
+        Args:
+            user_id(str|None): If present, checks for presence against existing
+                MAU cohort
+
+            threepid(dict|None): If present, checks for presence against configured
+                reserved threepid. Used in cases where the user is trying register
+                with a MAU blocked server, normally they would be rejected but their
+                threepid is on the reserved list. user_id and
+                threepid should never be set at the same time.
+
+            user_type(str|None): If present, is used to decide whether to check against
+                certain blocking reasons like MAU.
+        """
+
+        # Never fail an auth check for the server notices users or support user
+        # This can be a problem where event creation is prohibited due to blocking
+        if user_id is not None:
+            if user_id == self._server_notices_mxid:
+                return
+            if (yield self.store.is_support_user(user_id)):
+                return
+
+        if self._hs_disabled:
+            raise ResourceLimitError(
+                403,
+                self._hs_disabled_message,
+                errcode=Codes.RESOURCE_LIMIT_EXCEEDED,
+                admin_contact=self._admin_contact,
+                limit_type=LimitBlockingTypes.HS_DISABLED,
+            )
+        if self._limit_usage_by_mau is True:
+            assert not (user_id and threepid)
+
+            # If the user is already part of the MAU cohort or a trial user
+            if user_id:
+                timestamp = yield self.store.user_last_seen_monthly_active(user_id)
+                if timestamp:
+                    return
+
+                is_trial = yield self.store.is_trial_user(user_id)
+                if is_trial:
+                    return
+            elif threepid:
+                # If the user does not exist yet, but is signing up with a
+                # reserved threepid then pass auth check
+                if is_threepid_reserved(self._mau_limits_reserved_threepids, threepid):
+                    return
+            elif user_type == UserTypes.SUPPORT:
+                # If the user does not exist yet and is of type "support",
+                # allow registration. Support users are excluded from MAU checks.
+                return
+            # Else if there is no room in the MAU bucket, bail
+            current_mau = yield self.store.get_monthly_active_count()
+            if current_mau >= self._max_mau_value:
+                raise ResourceLimitError(
+                    403,
+                    "Monthly Active User Limit Exceeded",
+                    admin_contact=self._admin_contact,
+                    errcode=Codes.RESOURCE_LIMIT_EXCEEDED,
+                    limit_type=LimitBlockingTypes.MONTHLY_ACTIVE_USER,
+                )

synapse/api/constants.py

@@ -61,12 +61,9 @@ class LoginType(object):
     MSISDN = "m.login.msisdn"
     RECAPTCHA = "m.login.recaptcha"
     TERMS = "m.login.terms"
+    SSO = "m.login.sso"
     DUMMY = "m.login.dummy"
 
-    # Only for C/S API v1
-    APPLICATION_SERVICE = "m.login.application_service"
-    SHARED_SECRET = "org.matrix.login.shared_secret"
-
 
 class EventTypes(object):
     Member = "m.room.member"
@@ -77,12 +74,11 @@ class EventTypes(object):
     Aliases = "m.room.aliases"
     Redaction = "m.room.redaction"
     ThirdPartyInvite = "m.room.third_party_invite"
-    Encryption = "m.room.encryption"
     RelatedGroups = "m.room.related_groups"
 
     RoomHistoryVisibility = "m.room.history_visibility"
     CanonicalAlias = "m.room.canonical_alias"
-    Encryption = "m.room.encryption"
+    Encrypted = "m.room.encrypted"
     RoomAvatar = "m.room.avatar"
     RoomEncryption = "m.room.encryption"
     GuestAccess = "m.room.guest_access"
@@ -97,6 +93,8 @@ class EventTypes(object):
 
     Retention = "m.room.retention"
 
+    Presence = "m.presence"
+
 
 class RejectedReason(object):
     AUTH_ERROR = "auth_error"
@@ -152,3 +150,8 @@ class EventContentFields(object):
     # Timestamp to delete the event after
     # cf https://github.com/matrix-org/matrix-doc/pull/2228
     SELF_DESTRUCT_AFTER = "org.matrix.self_destruct_after"
+
+
+class RoomEncryptionAlgorithms(object):
+    MEGOLM_V1_AES_SHA2 = "m.megolm.v1.aes-sha2"
+    DEFAULT = MEGOLM_V1_AES_SHA2

synapse/api/errors.py

@@ -17,13 +17,13 @@
 """Contains exceptions and error codes."""
 
 import logging
-from typing import Dict
-
-from six import iteritems
-from six.moves import http_client
+from http import HTTPStatus
+from typing import Dict, List
 
 from canonicaljson import json
 
+from twisted.web import http
+
 logger = logging.getLogger(__name__)
 
 
@@ -62,8 +62,16 @@ class Codes(object):
     INCOMPATIBLE_ROOM_VERSION = "M_INCOMPATIBLE_ROOM_VERSION"
     WRONG_ROOM_KEYS_VERSION = "M_WRONG_ROOM_KEYS_VERSION"
     EXPIRED_ACCOUNT = "ORG_MATRIX_EXPIRED_ACCOUNT"
+    PASSWORD_TOO_SHORT = "M_PASSWORD_TOO_SHORT"
+    PASSWORD_NO_DIGIT = "M_PASSWORD_NO_DIGIT"
+    PASSWORD_NO_UPPERCASE = "M_PASSWORD_NO_UPPERCASE"
+    PASSWORD_NO_LOWERCASE = "M_PASSWORD_NO_LOWERCASE"
+    PASSWORD_NO_SYMBOL = "M_PASSWORD_NO_SYMBOL"
+    PASSWORD_IN_DICTIONARY = "M_PASSWORD_IN_DICTIONARY"
+    WEAK_PASSWORD = "M_WEAK_PASSWORD"
     INVALID_SIGNATURE = "M_INVALID_SIGNATURE"
     USER_DEACTIVATED = "M_USER_DEACTIVATED"
+    BAD_ALIAS = "M_BAD_ALIAS"
 
 
 class CodeMessageException(RuntimeError):
@@ -76,10 +84,40 @@ class CodeMessageException(RuntimeError):
 
     def __init__(self, code, msg):
         super(CodeMessageException, self).__init__("%d: %s" % (code, msg))
-        self.code = code
+
+        # Some calls to this method pass instances of http.HTTPStatus for `code`.
+        # While HTTPStatus is a subclass of int, it has magic __str__ methods
+        # which emit `HTTPStatus.FORBIDDEN` when converted to a str, instead of `403`.
+        # This causes inconsistency in our log lines.
+        #
+        # To eliminate this behaviour, we convert them to their integer equivalents here.
+        self.code = int(code)
         self.msg = msg
 
 
+class RedirectException(CodeMessageException):
+    """A pseudo-error indicating that we want to redirect the client to a different
+    location
+
+    Attributes:
+        cookies: a list of set-cookies values to add to the response. For example:
+           b"sessionId=a3fWa; Expires=Wed, 21 Oct 2015 07:28:00 GMT"
+    """
+
+    def __init__(self, location: bytes, http_code: int = http.FOUND):
+        """
+
+        Args:
+            location: the URI to redirect to
+            http_code: the HTTP response code
+        """
+        msg = "Redirect to %s" % (location.decode("utf-8"),)
+        super().__init__(code=http_code, msg=msg)
+        self.location = location
+
+        self.cookies = []  # type: List[bytes]
+
+
 class SynapseError(CodeMessageException):
     """A base exception type for matrix errors which have an errcode and error
     message (as well as an HTTP status code).
@@ -134,7 +172,7 @@ class ConsentNotGivenError(SynapseError):
             consent_url (str): The URL where the user can give their consent
         """
         super(ConsentNotGivenError, self).__init__(
-            code=http_client.FORBIDDEN, msg=msg, errcode=Codes.CONSENT_NOT_GIVEN
+            code=HTTPStatus.FORBIDDEN, msg=msg, errcode=Codes.CONSENT_NOT_GIVEN
         )
         self._consent_uri = consent_uri
 
@@ -154,16 +192,10 @@ class UserDeactivatedError(SynapseError):
             msg (str): The human-readable error message
         """
         super(UserDeactivatedError, self).__init__(
-            code=http_client.FORBIDDEN, msg=msg, errcode=Codes.USER_DEACTIVATED
+            code=HTTPStatus.FORBIDDEN, msg=msg, errcode=Codes.USER_DEACTIVATED
         )
 
 
-class RegistrationError(SynapseError):
-    """An error raised when a registration event fails."""
-
-    pass
-
-
 class FederationDeniedError(SynapseError):
     """An error raised when the server tries to federate with a server which
     is not on its federation whitelist.
@@ -383,11 +415,9 @@ class UnsupportedRoomVersionError(SynapseError):
     """The client's request to create a room used a room version that the server does
     not support."""
 
-    def __init__(self):
+    def __init__(self, msg="Homeserver does not support this room version"):
         super(UnsupportedRoomVersionError, self).__init__(
-            code=400,
-            msg="Homeserver does not support this room version",
-            errcode=Codes.UNSUPPORTED_ROOM_VERSION,
+            code=400, msg=msg, errcode=Codes.UNSUPPORTED_ROOM_VERSION,
         )
 
 
@@ -421,6 +451,20 @@ class IncompatibleRoomVersionError(SynapseError):
         return cs_error(self.msg, self.errcode, room_version=self._room_version)
 
 
+class PasswordRefusedError(SynapseError):
+    """A password has been refused, either during password reset/change or registration.
+    """
+
+    def __init__(
+        self,
+        msg="This password doesn't comply with the server's policy",
+        errcode=Codes.WEAK_PASSWORD,
+    ):
+        super(PasswordRefusedError, self).__init__(
+            code=400, msg=msg, errcode=errcode,
+        )
+
+
 class RequestSendFailed(RuntimeError):
     """Sending a HTTP request over federation failed due to not being able to
     talk to the remote server for some reason.
@@ -451,7 +495,7 @@ def cs_error(msg, code=Codes.UNKNOWN, **kwargs):
         A dict representing the error response JSON.
     """
     err = {"error": msg, "errcode": code}
-    for key, value in iteritems(kwargs):
+    for key, value in kwargs.items():
         err[key] = value
     return err
 

synapse/api/filtering.py

@@ -15,7 +15,7 @@
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
-from six import text_type
+from typing import List
 
 import jsonschema
 from canonicaljson import json
@@ -293,7 +293,7 @@ class Filter(object):
             room_id = None
             ev_type = "m.presence"
             contains_url = False
-            labels = []
+            labels = []  # type: List[str]
         else:
             sender = event.get("sender", None)
             if not sender:
@@ -311,7 +311,7 @@ class Filter(object):
 
             content = event.get("content", {})
             # check if there is a string url field in the content for filtering purposes
-            contains_url = isinstance(content.get("url"), text_type)
+            contains_url = isinstance(content.get("url"), str)
             labels = content.get(EventContentFields.LABELS, [])
 
         return self.check_fields(room_id, sender, ev_type, labels, contains_url)

synapse/api/ratelimiting.py

@@ -1,4 +1,5 @@
 # Copyright 2014-2016 OpenMarket Ltd
+# Copyright 2020 The Matrix.org Foundation C.I.C.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -12,76 +13,161 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-import collections
+from collections import OrderedDict
+from typing import Any, Optional, Tuple
 
 from synapse.api.errors import LimitExceededError
+from synapse.util import Clock
 
 
 class Ratelimiter(object):
     """
-    Ratelimit message sending by user.
+    Ratelimit actions marked by arbitrary keys.
+
+    Args:
+        clock: A homeserver clock, for retrieving the current time
+        rate_hz: The long term number of actions that can be performed in a second.
+        burst_count: How many actions that can be performed before being limited.
     """
 
-    def __init__(self):
-        self.message_counts = collections.OrderedDict()
+    def __init__(self, clock: Clock, rate_hz: float, burst_count: int):
+        self.clock = clock
+        self.rate_hz = rate_hz
+        self.burst_count = burst_count
 
-    def can_do_action(self, key, time_now_s, rate_hz, burst_count, update=True):
+        # A ordered dictionary keeping track of actions, when they were last
+        # performed and how often. Each entry is a mapping from a key of arbitrary type
+        # to a tuple representing:
+        #   * How many times an action has occurred since a point in time
+        #   * The point in time
+        #   * The rate_hz of this particular entry. This can vary per request
+        self.actions = OrderedDict()  # type: OrderedDict[Any, Tuple[float, int, float]]
+
+    def can_do_action(
+        self,
+        key: Any,
+        rate_hz: Optional[float] = None,
+        burst_count: Optional[int] = None,
+        update: bool = True,
+        _time_now_s: Optional[int] = None,
+    ) -> Tuple[bool, float]:
         """Can the entity (e.g. user or IP address) perform the action?
+
         Args:
             key: The key we should use when rate limiting. Can be a user ID
                 (when sending events), an IP address, etc.
-            time_now_s: The time now.
-            rate_hz: The long term number of messages a user can send in a
-                second.
-            burst_count: How many messages the user can send before being
-                limited.
-            update (bool): Whether to update the message rates or not. This is
-                useful to check if a message would be allowed to be sent before
-                its ready to be actually sent.
+            rate_hz: The long term number of actions that can be performed in a second.
+                Overrides the value set during instantiation if set.
+            burst_count: How many actions that can be performed before being limited.
+                Overrides the value set during instantiation if set.
+            update: Whether to count this check as performing the action
+            _time_now_s: The current time. Optional, defaults to the current time according
+                to self.clock. Only used by tests.
+
         Returns:
-            A pair of a bool indicating if they can send a message now and a
-                time in seconds of when they can next send a message.
+            A tuple containing:
+                * A bool indicating if they can perform the action now
+                * The reactor timestamp for when the action can be performed next.
+                  -1 if rate_hz is less than or equal to zero
         """
-        self.prune_message_counts(time_now_s)
-        message_count, time_start, _ignored = self.message_counts.get(
-            key, (0.0, time_now_s, None)
-        )
+        # Override default values if set
+        time_now_s = _time_now_s if _time_now_s is not None else self.clock.time()
+        rate_hz = rate_hz if rate_hz is not None else self.rate_hz
+        burst_count = burst_count if burst_count is not None else self.burst_count
+
+        # Remove any expired entries
+        self._prune_message_counts(time_now_s)
+
+        # Check if there is an existing count entry for this key
+        action_count, time_start, _ = self.actions.get(key, (0.0, time_now_s, 0.0))
+
+        # Check whether performing another action is allowed
         time_delta = time_now_s - time_start
-        sent_count = message_count - time_delta * rate_hz
-        if sent_count < 0:
+        performed_count = action_count - time_delta * rate_hz
+        if performed_count < 0:
+            # Allow, reset back to count 1
             allowed = True
             time_start = time_now_s
-            message_count = 1.0
-        elif sent_count > burst_count - 1.0:
+            action_count = 1.0
+        elif performed_count > burst_count - 1.0:
+            # Deny, we have exceeded our burst count
             allowed = False
         else:
+            # We haven't reached our limit yet
             allowed = True
-            message_count += 1
+            action_count += 1.0
 
         if update:
-            self.message_counts[key] = (message_count, time_start, rate_hz)
+            self.actions[key] = (action_count, time_start, rate_hz)
 
         if rate_hz > 0:
-            time_allowed = time_start + (message_count - burst_count + 1) / rate_hz
+            # Find out when the count of existing actions expires
+            time_allowed = time_start + (action_count - burst_count + 1) / rate_hz
+
+            # Don't give back a time in the past
             if time_allowed < time_now_s:
                 time_allowed = time_now_s
+
         else:
+            # XXX: Why is this -1? This seems to only be used in
+            # self.ratelimit. I guess so that clients get a time in the past and don't
+            # feel afraid to try again immediately
             time_allowed = -1
 
         return allowed, time_allowed
 
-    def prune_message_counts(self, time_now_s):
-        for key in list(self.message_counts.keys()):
-            message_count, time_start, rate_hz = self.message_counts[key]
-            time_delta = time_now_s - time_start
-            if message_count - time_delta * rate_hz > 0:
-                break
-            else:
-                del self.message_counts[key]
+    def _prune_message_counts(self, time_now_s: int):
+        """Remove message count entries that have not exceeded their defined
+        rate_hz limit
+
+        Args:
+            time_now_s: The current time
+        """
+        # We create a copy of the key list here as the dictionary is modified during
+        # the loop
+        for key in list(self.actions.keys()):
+            action_count, time_start, rate_hz = self.actions[key]
+
+            # Rate limit = "seconds since we started limiting this action" * rate_hz
+            # If this limit has not been exceeded, wipe our record of this action
+            time_delta = time_now_s - time_start
+            if action_count - time_delta * rate_hz > 0:
+                continue
+            else:
+                del self.actions[key]
+
+    def ratelimit(
+        self,
+        key: Any,
+        rate_hz: Optional[float] = None,
+        burst_count: Optional[int] = None,
+        update: bool = True,
+        _time_now_s: Optional[int] = None,
+    ):
+        """Checks if an action can be performed. If not, raises a LimitExceededError
+
+        Args:
+            key: An arbitrary key used to classify an action
+            rate_hz: The long term number of actions that can be performed in a second.
+                Overrides the value set during instantiation if set.
+            burst_count: How many actions that can be performed before being limited.
+                Overrides the value set during instantiation if set.
+            update: Whether to count this check as performing the action
+            _time_now_s: The current time. Optional, defaults to the current time according
+                to self.clock. Only used by tests.
+
+        Raises:
+            LimitExceededError: If an action could not be performed, along with the time in
+                milliseconds until the action can be performed again
+        """
+        time_now_s = _time_now_s if _time_now_s is not None else self.clock.time()
 
-    def ratelimit(self, key, time_now_s, rate_hz, burst_count, update=True):
         allowed, time_allowed = self.can_do_action(
-            key, time_now_s, rate_hz, burst_count, update
+            key,
+            rate_hz=rate_hz,
+            burst_count=burst_count,
+            update=update,
+            _time_now_s=time_now_s,
         )
 
         if not allowed:

synapse/api/room_versions.py

@@ -57,6 +57,17 @@ class RoomVersion(object):
     state_res = attr.ib()  # int; one of the StateResolutionVersions
     enforce_key_validity = attr.ib()  # bool
 
+    # bool: before MSC2261/MSC2432, m.room.aliases had special auth rules and redaction rules
+    special_case_aliases_auth = attr.ib(type=bool)
+    # Strictly enforce canonicaljson, do not allow:
+    # * Integers outside the range of [-2 ^ 53 + 1, 2 ^ 53 - 1]
+    # * Floats
+    # * NaN, Infinity, -Infinity
+    strict_canonicaljson = attr.ib(type=bool)
+    # bool: MSC2209: Check 'notifications' key while verifying
+    # m.room.power_levels auth rules.
+    limit_notifications_power_levels = attr.ib(type=bool)
+
 
 class RoomVersions(object):
     V1 = RoomVersion(
@@ -65,6 +76,9 @@ class RoomVersions(object):
         EventFormatVersions.V1,
         StateResolutionVersions.V1,
         enforce_key_validity=False,
+        special_case_aliases_auth=True,
+        strict_canonicaljson=False,
+        limit_notifications_power_levels=False,
     )
     V2 = RoomVersion(
         "2",
@@ -72,6 +86,9 @@ class RoomVersions(object):
         EventFormatVersions.V1,
         StateResolutionVersions.V2,
         enforce_key_validity=False,
+        special_case_aliases_auth=True,
+        strict_canonicaljson=False,
+        limit_notifications_power_levels=False,
     )
     V3 = RoomVersion(
         "3",
@@ -79,6 +96,9 @@ class RoomVersions(object):
         EventFormatVersions.V2,
         StateResolutionVersions.V2,
         enforce_key_validity=False,
+        special_case_aliases_auth=True,
+        strict_canonicaljson=False,
+        limit_notifications_power_levels=False,
     )
     V4 = RoomVersion(
         "4",
@@ -86,6 +106,9 @@ class RoomVersions(object):
         EventFormatVersions.V3,
         StateResolutionVersions.V2,
         enforce_key_validity=False,
+        special_case_aliases_auth=True,
+        strict_canonicaljson=False,
+        limit_notifications_power_levels=False,
     )
     V5 = RoomVersion(
         "5",
@@ -93,6 +116,19 @@ class RoomVersions(object):
         EventFormatVersions.V3,
         StateResolutionVersions.V2,
         enforce_key_validity=True,
+        special_case_aliases_auth=True,
+        strict_canonicaljson=False,
+        limit_notifications_power_levels=False,
+    )
+    V6 = RoomVersion(
+        "6",
+        RoomDisposition.STABLE,
+        EventFormatVersions.V3,
+        StateResolutionVersions.V2,
+        enforce_key_validity=True,
+        special_case_aliases_auth=False,
+        strict_canonicaljson=True,
+        limit_notifications_power_levels=True,
     )
 
 
@@ -104,5 +140,6 @@ KNOWN_ROOM_VERSIONS = {
         RoomVersions.V3,
         RoomVersions.V4,
         RoomVersions.V5,
+        RoomVersions.V6,
     )
 }  # type: Dict[str, RoomVersion]

synapse/api/urls.py

@@ -17,8 +17,7 @@
 """Contains the URL paths to prefix various aspects of the server with. """
 import hmac
 from hashlib import sha256
-
-from six.moves.urllib.parse import urlencode
+from urllib.parse import urlencode
 
 from synapse.config import ConfigError
 

synapse/app/_base.py

@@ -20,14 +20,17 @@ import signal
 import socket
 import sys
 import traceback
+from typing import Iterable
 
 from daemonize import Daemonize
+from typing_extensions import NoReturn
 
 from twisted.internet import defer, error, reactor
 from twisted.protocols.tls import TLSMemoryBIOFactory
 
 import synapse
 from synapse.app import check_bind_error
+from synapse.config.server import ListenerConfig
 from synapse.crypto import context_factory
 from synapse.logging.context import PreserveLoggingContext
 from synapse.util.async_helpers import Linearizer
@@ -139,9 +142,9 @@ def start_reactor(
             run()
 
 
-def quit_with_error(error_string):
+def quit_with_error(error_string: str) -> NoReturn:
     message_lines = error_string.split("\n")
-    line_length = max([len(l) for l in message_lines if len(l) < 80]) + 2
+    line_length = max(len(line) for line in message_lines if len(line) < 80) + 2
     sys.stderr.write("*" * line_length + "\n")
     for line in message_lines:
         sys.stderr.write(" %s\n" % (line.rstrip(),))
@@ -233,7 +236,7 @@ def refresh_certificate(hs):
         logger.info("Context factories updated.")
 
 
-def start(hs, listeners=None):
+def start(hs: "synapse.server.HomeServer", listeners: Iterable[ListenerConfig]):
     """
     Start a Synapse server or worker.
 
@@ -244,8 +247,8 @@ def start(hs, listeners=None):
     notify systemd.
 
     Args:
-        hs (synapse.server.HomeServer)
-        listeners (list[dict]): Listener configuration ('listeners' in homeserver.yaml)
+        hs: homeserver instance
+        listeners: Listener configuration ('listeners' in homeserver.yaml)
     """
     try:
         # Set up the SIGHUP machinery.
@@ -270,15 +273,25 @@ def start(hs, listeners=None):
 
         # Start the tracer
         synapse.logging.opentracing.init_tracer(  # type: ignore[attr-defined] # noqa
-            hs.config
+            hs
         )
 
         # It is now safe to start your Synapse.
         hs.start_listening(listeners)
         hs.get_datastore().db.start_profiling()
+        hs.get_pusherpool().start()
 
         setup_sentry(hs)
         setup_sdnotify(hs)
+
+        # We now freeze all allocated objects in the hopes that (almost)
+        # everything currently allocated are things that will be used for the
+        # rest of time. Doing so means less work each GC (hopefully).
+        #
+        # This only works on Python 3.7
+        if sys.version_info >= (3, 7):
+            gc.collect()
+            gc.freeze()
     except Exception:
         traceback.print_exc(file=sys.stderr)
         reactor = hs.get_reactor()
@@ -306,7 +319,7 @@ def setup_sentry(hs):
         scope.set_tag("matrix_server_name", hs.config.server_name)
 
         app = hs.config.worker_app if hs.config.worker_app else "synapse.app.homeserver"
-        name = hs.config.worker_name if hs.config.worker_name else "master"
+        name = hs.get_instance_name()
         scope.set_tag("worker_app", app)
         scope.set_tag("worker_name", name)
 

synapse/app/admin_cmd.py

@@ -43,7 +43,6 @@ from synapse.replication.slave.storage.push_rule import SlavedPushRuleStore
 from synapse.replication.slave.storage.receipts import SlavedReceiptsStore
 from synapse.replication.slave.storage.registration import SlavedRegistrationStore
 from synapse.replication.slave.storage.room import RoomStore
-from synapse.replication.tcp.client import ReplicationClientHandler
 from synapse.server import HomeServer
 from synapse.util.logcontext import LoggingContext
 from synapse.util.versionstring import get_version_string
@@ -79,18 +78,6 @@ class AdminCmdServer(HomeServer):
     def start_listening(self, listeners):
         pass
 
-    def build_tcp_replication(self):
-        return AdminCmdReplicationHandler(self)
-
-
-class AdminCmdReplicationHandler(ReplicationClientHandler):
-    @defer.inlineCallbacks
-    def on_rdata(self, stream_name, token, rows):
-        pass
-
-    def get_streams_to_replicate(self):
-        return {}
-
 
 @defer.inlineCallbacks
 def export_data_command(hs, args):

synapse/app/appservice.py

@@ -13,162 +13,11 @@
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
-import logging
+
 import sys
 
-from twisted.internet import defer, reactor
-from twisted.web.resource import NoResource
-
-import synapse
-from synapse import events
-from synapse.app import _base
-from synapse.config._base import ConfigError
-from synapse.config.homeserver import HomeServerConfig
-from synapse.config.logger import setup_logging
-from synapse.http.site import SynapseSite
-from synapse.logging.context import LoggingContext, run_in_background
-from synapse.metrics import METRICS_PREFIX, MetricsResource, RegistryProxy
-from synapse.replication.slave.storage.appservice import SlavedApplicationServiceStore
-from synapse.replication.slave.storage.directory import DirectoryStore
-from synapse.replication.slave.storage.events import SlavedEventStore
-from synapse.replication.slave.storage.registration import SlavedRegistrationStore
-from synapse.replication.tcp.client import ReplicationClientHandler
-from synapse.server import HomeServer
-from synapse.util.httpresourcetree import create_resource_tree
-from synapse.util.manhole import manhole
-from synapse.util.versionstring import get_version_string
-
-logger = logging.getLogger("synapse.app.appservice")
-
-
-class AppserviceSlaveStore(
-    DirectoryStore,
-    SlavedEventStore,
-    SlavedApplicationServiceStore,
-    SlavedRegistrationStore,
-):
-    pass
-
-
-class AppserviceServer(HomeServer):
-    DATASTORE_CLASS = AppserviceSlaveStore
-
-    def _listen_http(self, listener_config):
-        port = listener_config["port"]
-        bind_addresses = listener_config["bind_addresses"]
-        site_tag = listener_config.get("tag", port)
-        resources = {}
-        for res in listener_config["resources"]:
-            for name in res["names"]:
-                if name == "metrics":
-                    resources[METRICS_PREFIX] = MetricsResource(RegistryProxy)
-
-        root_resource = create_resource_tree(resources, NoResource())
-
-        _base.listen_tcp(
-            bind_addresses,
-            port,
-            SynapseSite(
-                "synapse.access.http.%s" % (site_tag,),
-                site_tag,
-                listener_config,
-                root_resource,
-                self.version_string,
-            ),
-        )
-
-        logger.info("Synapse appservice now listening on port %d", port)
-
-    def start_listening(self, listeners):
-        for listener in listeners:
-            if listener["type"] == "http":
-                self._listen_http(listener)
-            elif listener["type"] == "manhole":
-                _base.listen_tcp(
-                    listener["bind_addresses"],
-                    listener["port"],
-                    manhole(
-                        username="matrix", password="rabbithole", globals={"hs": self}
-                    ),
-                )
-            elif listener["type"] == "metrics":
-                if not self.get_config().enable_metrics:
-                    logger.warning(
-                        (
-                            "Metrics listener configured, but "
-                            "enable_metrics is not True!"
-                        )
-                    )
-                else:
-                    _base.listen_metrics(listener["bind_addresses"], listener["port"])
-            else:
-                logger.warning("Unrecognized listener type: %s", listener["type"])
-
-        self.get_tcp_replication().start_replication(self)
-
-    def build_tcp_replication(self):
-        return ASReplicationHandler(self)
-
-
-class ASReplicationHandler(ReplicationClientHandler):
-    def __init__(self, hs):
-        super(ASReplicationHandler, self).__init__(hs.get_datastore())
-        self.appservice_handler = hs.get_application_service_handler()
-
-    @defer.inlineCallbacks
-    def on_rdata(self, stream_name, token, rows):
-        yield super(ASReplicationHandler, self).on_rdata(stream_name, token, rows)
-
-        if stream_name == "events":
-            max_stream_id = self.store.get_room_max_stream_ordering()
-            run_in_background(self._notify_app_services, max_stream_id)
-
-    @defer.inlineCallbacks
-    def _notify_app_services(self, room_stream_id):
-        try:
-            yield self.appservice_handler.notify_interested_services(room_stream_id)
-        except Exception:
-            logger.exception("Error notifying application services of event")
-
-
-def start(config_options):
-    try:
-        config = HomeServerConfig.load_config("Synapse appservice", config_options)
-    except ConfigError as e:
-        sys.stderr.write("\n" + str(e) + "\n")
-        sys.exit(1)
-
-    assert config.worker_app == "synapse.app.appservice"
-
-    events.USE_FROZEN_DICTS = config.use_frozen_dicts
-
-    if config.notify_appservices:
-        sys.stderr.write(
-            "\nThe appservices must be disabled in the main synapse process"
-            "\nbefore they can be run in a separate worker."
-            "\nPlease add ``notify_appservices: false`` to the main config"
-            "\n"
-        )
-        sys.exit(1)
-
-    # Force the pushers to start since they will be disabled in the main config
-    config.notify_appservices = True
-
-    ps = AppserviceServer(
-        config.server_name,
-        config=config,
-        version_string="Synapse/" + get_version_string(synapse),
-    )
-
-    setup_logging(ps, config, use_worker_options=True)
-
-    ps.setup()
-    reactor.addSystemEventTrigger(
-        "before", "startup", _base.start, ps, config.worker_listeners
-    )
-
-    _base.start_worker_reactor("synapse-appservice", config)
-
+from synapse.app.generic_worker import start
+from synapse.util.logcontext import LoggingContext
 
 if __name__ == "__main__":
     with LoggingContext("main"):

synapse/app/client_reader.py

@@ -13,188 +13,11 @@
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
-import logging
+
 import sys
 
-from twisted.internet import reactor
-from twisted.web.resource import NoResource
-
-import synapse
-from synapse import events
-from synapse.app import _base
-from synapse.config._base import ConfigError
-from synapse.config.homeserver import HomeServerConfig
-from synapse.config.logger import setup_logging
-from synapse.http.server import JsonResource
-from synapse.http.site import SynapseSite
-from synapse.logging.context import LoggingContext
-from synapse.metrics import METRICS_PREFIX, MetricsResource, RegistryProxy
-from synapse.replication.slave.storage._base import BaseSlavedStore
-from synapse.replication.slave.storage.account_data import SlavedAccountDataStore
-from synapse.replication.slave.storage.appservice import SlavedApplicationServiceStore
-from synapse.replication.slave.storage.client_ips import SlavedClientIpStore
-from synapse.replication.slave.storage.deviceinbox import SlavedDeviceInboxStore
-from synapse.replication.slave.storage.devices import SlavedDeviceStore
-from synapse.replication.slave.storage.directory import DirectoryStore
-from synapse.replication.slave.storage.events import SlavedEventStore
-from synapse.replication.slave.storage.groups import SlavedGroupServerStore
-from synapse.replication.slave.storage.keys import SlavedKeyStore
-from synapse.replication.slave.storage.profile import SlavedProfileStore
-from synapse.replication.slave.storage.push_rule import SlavedPushRuleStore
-from synapse.replication.slave.storage.receipts import SlavedReceiptsStore
-from synapse.replication.slave.storage.registration import SlavedRegistrationStore
-from synapse.replication.slave.storage.room import RoomStore
-from synapse.replication.slave.storage.transactions import SlavedTransactionStore
-from synapse.replication.tcp.client import ReplicationClientHandler
-from synapse.rest.client.v1.login import LoginRestServlet
-from synapse.rest.client.v1.push_rule import PushRuleRestServlet
-from synapse.rest.client.v1.room import (
-    JoinedRoomMemberListRestServlet,
-    PublicRoomListRestServlet,
-    RoomEventContextServlet,
-    RoomMemberListRestServlet,
-    RoomMessageListRestServlet,
-    RoomStateRestServlet,
-)
-from synapse.rest.client.v1.voip import VoipRestServlet
-from synapse.rest.client.v2_alpha.account import ThreepidRestServlet
-from synapse.rest.client.v2_alpha.keys import KeyChangesServlet, KeyQueryServlet
-from synapse.rest.client.v2_alpha.register import RegisterRestServlet
-from synapse.rest.client.versions import VersionsRestServlet
-from synapse.server import HomeServer
-from synapse.util.httpresourcetree import create_resource_tree
-from synapse.util.manhole import manhole
-from synapse.util.versionstring import get_version_string
-
-logger = logging.getLogger("synapse.app.client_reader")
-
-
-class ClientReaderSlavedStore(
-    SlavedDeviceInboxStore,
-    SlavedDeviceStore,
-    SlavedReceiptsStore,
-    SlavedPushRuleStore,
-    SlavedGroupServerStore,
-    SlavedAccountDataStore,
-    SlavedEventStore,
-    SlavedKeyStore,
-    RoomStore,
-    DirectoryStore,
-    SlavedApplicationServiceStore,
-    SlavedRegistrationStore,
-    SlavedTransactionStore,
-    SlavedProfileStore,
-    SlavedClientIpStore,
-    BaseSlavedStore,
-):
-    pass
-
-
-class ClientReaderServer(HomeServer):
-    DATASTORE_CLASS = ClientReaderSlavedStore
-
-    def _listen_http(self, listener_config):
-        port = listener_config["port"]
-        bind_addresses = listener_config["bind_addresses"]
-        site_tag = listener_config.get("tag", port)
-        resources = {}
-        for res in listener_config["resources"]:
-            for name in res["names"]:
-                if name == "metrics":
-                    resources[METRICS_PREFIX] = MetricsResource(RegistryProxy)
-                elif name == "client":
-                    resource = JsonResource(self, canonical_json=False)
-
-                    PublicRoomListRestServlet(self).register(resource)
-                    RoomMemberListRestServlet(self).register(resource)
-                    JoinedRoomMemberListRestServlet(self).register(resource)
-                    RoomStateRestServlet(self).register(resource)
-                    RoomEventContextServlet(self).register(resource)
-                    RoomMessageListRestServlet(self).register(resource)
-                    RegisterRestServlet(self).register(resource)
-                    LoginRestServlet(self).register(resource)
-                    ThreepidRestServlet(self).register(resource)
-                    KeyQueryServlet(self).register(resource)
-                    KeyChangesServlet(self).register(resource)
-                    VoipRestServlet(self).register(resource)
-                    PushRuleRestServlet(self).register(resource)
-                    VersionsRestServlet(self).register(resource)
-
-                    resources.update({"/_matrix/client": resource})
-
-        root_resource = create_resource_tree(resources, NoResource())
-
-        _base.listen_tcp(
-            bind_addresses,
-            port,
-            SynapseSite(
-                "synapse.access.http.%s" % (site_tag,),
-                site_tag,
-                listener_config,
-                root_resource,
-                self.version_string,
-            ),
-        )
-
-        logger.info("Synapse client reader now listening on port %d", port)
-
-    def start_listening(self, listeners):
-        for listener in listeners:
-            if listener["type"] == "http":
-                self._listen_http(listener)
-            elif listener["type"] == "manhole":
-                _base.listen_tcp(
-                    listener["bind_addresses"],
-                    listener["port"],
-                    manhole(
-                        username="matrix", password="rabbithole", globals={"hs": self}
-                    ),
-                )
-            elif listener["type"] == "metrics":
-                if not self.get_config().enable_metrics:
-                    logger.warning(
-                        (
-                            "Metrics listener configured, but "
-                            "enable_metrics is not True!"
-                        )
-                    )
-                else:
-                    _base.listen_metrics(listener["bind_addresses"], listener["port"])
-            else:
-                logger.warning("Unrecognized listener type: %s", listener["type"])
-
-        self.get_tcp_replication().start_replication(self)
-
-    def build_tcp_replication(self):
-        return ReplicationClientHandler(self.get_datastore())
-
-
-def start(config_options):
-    try:
-        config = HomeServerConfig.load_config("Synapse client reader", config_options)
-    except ConfigError as e:
-        sys.stderr.write("\n" + str(e) + "\n")
-        sys.exit(1)
-
-    assert config.worker_app == "synapse.app.client_reader"
-
-    events.USE_FROZEN_DICTS = config.use_frozen_dicts
-
-    ss = ClientReaderServer(
-        config.server_name,
-        config=config,
-        version_string="Synapse/" + get_version_string(synapse),
-    )
-
-    setup_logging(ss, config, use_worker_options=True)
-
-    ss.setup()
-    reactor.addSystemEventTrigger(
-        "before", "startup", _base.start, ss, config.worker_listeners
-    )
-
-    _base.start_worker_reactor("synapse-client-reader", config)
-
+from synapse.app.generic_worker import start
+from synapse.util.logcontext import LoggingContext
 
 if __name__ == "__main__":
     with LoggingContext("main"):