#7124 changed the behaviour of remote thumbnails so that the thumbnailing method was included in the filename of the thumbnail. To support existing files, it included a fallback so that we would check the old filename if the new filename didn't exist.
Unfortunately, it didn't apply this logic to storage providers, so any thumbnails stored on such a storage provider was broken.
For negative streams we have to negate the internal stream ID before
querying the DB.
The effect of this bug was to query far too many rows, slowing start up
time, but we would correctly filter the results afterwards so there was
no ill effect.
This converts a few more of our inline HTML templates to Jinja. This is somewhat part of #7280 and should make it a bit easier to customize these in the future.
The idea is that in future tokens will encode a mapping of instance to position. However, we don't want to include the full instance name in the string representation, so instead we'll have a mapping between instance name and an immutable integer ID in the DB that we can use instead. We'll then do the lookup when we serialize/deserialize the token (we could alternatively pass around an `Instance` type that includes both the name and ID, but that turns out to be a lot more invasive).
This was a bit unweildy for what I wanted: in particular, I wanted to assign
each measurement straight into a bucket, rather than storing an intermediate
Counter which didn't do any bucketing at all.
I've replaced it with something that is hopefully a bit easier to use.
(I'm not entirely sure what the difference between a HistogramMetricFamily and
a GaugeHistogramMetricFamily is, but given our counters can go down as well as
up the latter *sounds* more accurate?)
Our hacked-up `_exposition.py` was stripping out some samples it shouldn't
have been. Put them back in, to more closely match the upstream
`exposition.py`.
* Don't check whether a 3pid is allowed to register during password reset
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
* Changelog
* Fix table scan of events on worker startup.
This happened because we assumed "new" writers had an initial stream
position of 0, so the replication code tried to fetch all events written
by the instance between 0 and the current position.
Instead, set the initial position of new writers to the current
persisted up to position, on the assumption that new writers won't have
written anything before that point.
* Consider old writers coming back as "new".
Otherwise we'd try and fetch entries between the old stale token and the
current position, even though it won't have written any rows.
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
This PR adds a script that:
* Builds the local Synapse checkout using our existing `docker/Dockerfile` image.
* Downloads [Complement](https://github.com/matrix-org/complement/)'s source code.
* Builds the [Synapse.Dockerfile](https://github.com/matrix-org/complement/blob/master/dockerfiles/Synapse.Dockerfile) using the above dockerfile as a base.
* Builds and runs Complement against it.
This set up differs slightly from [that of the dendrite repo](https://github.com/matrix-org/dendrite/blob/master/build/scripts/complement.sh) (`complement.sh`, `Complement.Dockerfile`), which instead stores a separate, but slightly modified, dockerfile in Dendrite's repo rather than running the one stored in Complement's repo. That synapse equivalent to that dockerfile (`Synapse.Dockerfile`) in Complement's repo is just based on top of `matrixdotorg/synapse:latest`, which we opt to build here locally.
Thus copying over the files from Complement's repo wouldn't change any functionality, and would result in two instances of the same files. So just using the dockerfile in Complement's repo was decided upon instead.
Broken in https://github.com/matrix-org/synapse/pull/8275 and has yet to be put in a release. Fixes https://github.com/matrix-org/synapse/issues/8418.
`next_link` is an optional parameter. However, we were checking whether the `next_link` param was valid, even if it wasn't provided. In that case, `next_link` was `None`, which would clearly not be a valid URL.
This would prevent password reset and other operations if `next_link` was not provided, and the `next_link_domain_whitelist` config option was set.
* Remove `on_timeout_cancel` from `timeout_deferred`
The `on_timeout_cancel` param to `timeout_deferred` wasn't always called on a
timeout (in particular if the canceller raised an exception), so it was
unreliable. It was also only used in one place, and to be honest it's easier to
do what it does a different way.
* Fix handling of connection timeouts in outgoing http requests
Turns out that if we get a timeout during connection, then a different
exception is raised, which wasn't always handled correctly.
To fix it, catch the exception in SimpleHttpClient and turn it into a
RequestTimedOutError (which is already a documented exception).
Also add a description to RequestTimedOutError so that we can see which stage
it failed at.
* Fix incorrect handling of timeouts reading federation responses
This was trapping the wrong sort of TimeoutError, so was never being hit.
The effect was relatively minor, but we should fix this so that it does the
expected thing.
* Fix inconsistent handling of `timeout` param between methods
`get_json`, `put_json` and `delete_json` were applying a different timeout to
the response body to `post_json`; bring them in line and test.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
This table was created in #8034 (1.20.0). It references
`ui_auth_sessions`, which is ignored, so this one should be too.
Signed-off-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
* Fix test_verify_json_objects_for_server_awaits_previous_requests
It turns out that this wasn't really testing what it thought it was testing
(in particular, `check_context` was turning failures into success, which was
making the tests pass even though it wasn't clear they should have been.
It was also somewhat overcomplex - we can test what it was trying to test
without mocking out perspectives servers.
* Fix warnings about finished logcontexts in the keyring
We need to make sure that we finish the key fetching magic before we run the
verifying code, to ensure that we don't mess up our logcontexts.
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
On startup `MultiWriteIdGenerator` fetches the maximum stream ID for
each instance from the table and uses that as its initial "current
position" for each writer. This is problematic as a) it involves either
a scan of events table or an index (neither of which is ideal), and b)
if rows are being persisted out of order elsewhere while the process
restarts then using the maximum stream ID is not correct. This could
theoretically lead to race conditions where e.g. events that are
persisted out of order are not sent down sync streams.
We fix this by creating a new table that tracks the current positions of
each writer to the stream, and update it each time we finish persisting
a new entry. This is a relatively small overhead when persisting events.
However for the cache invalidation stream this is a much bigger relative
overhead, so instead we note that for invalidation we don't actually
care about reliability over restarts (as there's no caches to
invalidate) and simply don't bother reading and writing to the new table
in that particular case.
#8037 changed the default `autoescape` option when rendering Jinja2 templates from `False` to `True`. This caused some bugs, noticeably around redirect URLs being escaped in SAML2 auth confirmation templates, causing those URLs to break for users.
This change returns the previous behaviour as it stood. We may want to look at each template individually and see whether autoescaping is a good idea at some point, but for now lets just fix the breakage.
The idea is to remove some of the places we pass around `int`, where it can represent one of two things:
1. the position of an event in the stream; or
2. a token that partitions the stream, used as part of the stream tokens.
The valid operations are then:
1. did a position happen before or after a token;
2. get all events that happened before or after a token; and
3. get all events between two tokens.
(Note that we don't want to allow other operations as we want to change the tokens to be vector clocks rather than simple ints)
I'd like to get a better insight into what we are doing with respect to state
res. The list of state groups we are resolving across should be short (if it
isn't, that's a massive problem in itself), so it should be fine to log it in
ite entiretly.
I've done some grepping and found approximately zero cases in which the
"shortcut" code delivered the result, so I've ripped that out too.
When updating the `room_stats_state` table, we try to check for null bytes slipping in to the content for state events. It turns out we had added `guest_access` as a field to room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a `m.room.guest_access` event then breaks `room_stats_state` updates.
This PR adds the check for `guest_access`.
This change adds a note and a few lines of configuration settings for Apache users to disable ModSecurity for Synapse's virtual hosts. With ModSecurity enabled and running with its default settings, Matrix clients are unable to send chat messages through the Synapse installation. With this change, ModSecurity can be disabled only for the Synapse virtual hosts.
When updating room_stats_state, we try to check for null bytes slipping
in to the
content for state events. It turns out we had added guest_access as a
field to
room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a m.room.guest_access event then breaks
room_stats_state
updates.
This PR adds the check for guest_access. A further PR will improve this
function so that this hopefully does not happen again in future.
Fixes: #8359
Trying to reactivate a user with the admin API (`PUT /_synapse/admin/v2/users/<user_name>`) causes an internal server error.
Seems to be a regression in #8033.
* Create a new function to verify that the length of a device name is
under a certain threshold.
* Refactor old code and tests to use said function.
* Verify device name length during registration of device
* Add a test for the above
Signed-off-by: Dionysis Grigoropoulos <dgrig@erethon.com>
1.19.3
Synapse 1.19.3 (2020-09-18)
===========================
Bugfixes
--------
- Partially mitigate bug where newly joined servers couldn't get past
events in a room when there is a malformed event.
([\#8350](https://github.com/matrix-org/synapse/issues/8350))
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Fix _set_destination_retry_timings
This came about because the code assumed that retry_interval
could not be NULL — which has been challenged by catch-up.
Add ability for ASes to /login using the `uk.half-shot.msc2778.login.application_service` login `type`.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
This is a bit of a hack, as `_check_sigs_and_hash_and_fetch` is intended
for attempting to pull an event from the database/(re)pull it from the
server that originally sent the event if checking the signature of the
event fails.
During backfill we *know* that we won't have the event in our database,
however it is still useful to be able to query the original sending
server as the server we're backfilling from may be acting maliciously.
The main benefit and reason for this change however is that
`_check_sigs_and_hash_and_fetch` will drop an event during backfill if
it cannot be successfully validated, whereas the current code will
simply fail the backfill request - resulting in the client's /messages
request silently being dropped.
This is a quick patch to fix backfilling rooms that contain malformed
events. A better implementation in planned in future.
Instead of just using the most recent extremities let's pick the
ones that will give us results that the pagination request cares about,
i.e. pick extremities only if they have a smaller depth than the
pagination token.
This is useful when we fail to backfill an extremity, as we no longer
get stuck requesting that same extremity repeatedly.
Synapse 1.20.0rc4 (2020-09-16)
==============================
Synapse 1.20.0rc4 is identical to 1.20.0rc3, with the addition of the security fix that was included in 1.19.2.
slots use less memory (and attribute access is faster) while slightly
limiting the flexibility of the class attributes. This focuses on objects
which are instantiated "often" and for short periods of time.
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
Synapse 1.20.0rc3 (2020-09-11)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
Some Linux distros have begun disabling TLSv1.0 and TLSv1.1 by default
for security reasons, for example in Fedora 33 onwards:
https://fedoraproject.org/wiki/Changes/StrongCryptoSettings2
Use TLSv1.2 for the fake TLS servers created in the test suite, to avoid
failures due to OpenSSL disallowing TLSv1.0:
<twisted.python.failure.Failure OpenSSL.SSL.Error: [('SSL routines',
'ssl_choose_client_version', 'unsupported protocol')]>
Signed-off-by: Dan Callaghan <djc@djc.id.au>
This PR adds a information about forwarding `/_synapse/client` endpoints through your reverse proxy. The first of these endpoints are introduced in https://github.com/matrix-org/synapse/pull/8004.
The idea here is that we pass the `max_stream_id` to everything, and only use the stream ID of the particular event to figure out *when* the max stream position has caught up to the event and we can notify people about it.
This is to maintain the distinction between the position of an item in the stream (i.e. event A has stream ID 513) and a token that can be used to partition the stream (i.e. give me all events after stream ID 352). This distinction becomes important when the tokens are more complicated than a single number, which they will be once we start tracking the position of multiple writers in the tokens.
The valid operations here are:
1. Is a position before or after a token
2. Fetching all events between two tokens
3. Merging multiple tokens to get the "max", i.e. `C = max(A, B)` means that for all positions P where P is before A *or* before B, then P is before C.
Future PR will change the token type to a dedicated type.
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
If a file cannot be thumbnailed for some reason (e.g. the file is empty), then
catch the exception and convert it to a reasonable error message for the client.
`pusher_pool.on_new_notifications` expected a min and max stream ID, however that was not what we were passing in. Instead, let's just pass it the current max stream ID and have it track the last stream ID it got passed.
I believe that it mostly worked as we called the function for every event. However, it would break for events that got persisted out of order, i.e, that were persisted but the max stream ID wasn't incremented as not all preceding events had finished persisting, and push for that event would be delayed until another event got pushed to the effected users.
This fixes an issue where different methods (crop/scale) overwrite each other.
This first tries the new path. If that fails and we are looking for a
remote thumbnail, it tries the old path. If that still isn't found, it
continues as normal.
This should probably be removed in the future, after some of the newer
thumbnails were generated with the new path on most deployments. Then
the overhead should be minimal if the other thumbnails need to be
regenerated.
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
The intention here is to change `StreamToken.room_key` to be a `RoomStreamToken` in a future PR, but that is a big enough change without this refactoring too.
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
This removes `SourcePaginationConfig` and `get_pagination_rows`. The reasoning behind this is that these generic classes/functions erased the types of the IDs it used (i.e. instead of passing around `StreamToken` it'd pass in e.g. `token.room_key`, which don't have uniform types).
By importing from canonicaljson the simplejson module was still being used
in some situations. After this change the std lib json is consistenty used
throughout Synapse.
Fixes https://github.com/matrix-org/synapse/issues/8238
Alongside the delta file, some changes were also necessary to the codebase to remove references to the now defunct `populate_stats_process_rooms_2` background job. Thankfully the latter doesn't seem to have made it into any documentation yet :)
The version 1.3.0 has a bug with unicode charecters:
```
>>> from canonicaljson import encode_pretty_printed_json
>>> encode_pretty_printed_json({'a': 'à'})
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/erdnaxeli/.pyenv/versions/3.6.7/lib/python3.6/site-packages/canonicaljson.py", line 96, in encode_pretty_printed_json
return _pretty_encoder.encode(json_object).encode("ascii")
UnicodeEncodeError: 'ascii' codec can't encode character '\xe0' in position 12: ordinal not in range(128)
```
Signed-off-by: Alexandre Morignot <erdnaxeli@cervoi.se>
Co-authored-by: Alexandre Morignot <erdnaxeli@cervoi.se>
* Fixup `ALTER TABLE` database queries
Make the new columns nullable, because doing otherwise can wedge a
server with a big database, as setting a default value rewrites the
table.
* Switch back to using the notifications count in the push badge
Clients are likely to be confused if we send a push but the badge count
is the unread messages one, and not the notifications one.
* Changelog
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
* Add shared_rooms api
* Add changelog
* Add .
* Wrap response in {"rooms": }
* linting
* Add unstable_features key
* Remove options from isort that aren't part of 5.x
`-y` and `-rc` are now default behaviour and no longer exist.
`dont-skip` is no longer required
https://timothycrosley.github.io/isort/CHANGELOG/#500-penny-july-4-2020
* Update imports to make isort happy
* Add changelog
* Update tox.ini file with correct invocation
* fix linting again for isort
* Vendor prefix unstable API
* Fix to match spec
* import Codes
* import Codes
* Use FORBIDDEN
* Update changelog.d/7785.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Implement get_shared_rooms_for_users
* a comma
* trailing whitespace
* Handle the easy feedback
* Switch to using runInteraction
* Add tests
* Feedback
* Seperate unstable endpoint from v2
* Add upgrade node
* a line
* Fix style by adding a blank line at EOF.
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Tulir Asokan <tulir@maunium.net>
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Update UPGRADE.rst
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Fix UPGRADE/CHANGELOG unstable paths
unstable unstable unstable
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
* Move `get_devices_with_keys_by_user` to `EndToEndKeyWorkerStore`
this seems a better fit for it.
This commit simply moves the existing code: no other changes at all.
* Rename `get_devices_with_keys_by_user`
to better reflect what it does.
* get_device_stream_token abstract method
To avoid referencing fields which are declared in the derived classes, make
`get_device_stream_token` abstract, and define that in the classes which define
`_device_list_id_gen`.
... and to show that it does something slightly different to
`_get_e2e_device_keys_txn`.
`include_all_devices` and `include_deleted_devices` were never used (and
`include_deleted_devices` was broken, since that would cause `None`s in the
result which were not handled in the loop below.
Add some typing too.
This fixes a bug where having multiple callers waiting on the same
stream and position will cause it to try and compare two deferreds,
which fails (due to the sorted list having an entry of `Tuple[int,
Deferred]`).
This is split out from https://github.com/matrix-org/synapse/pull/7438, which had gotten rather large.
`LoginRestServlet` has a couple helper methods, `login_submission_legacy_convert` and `login_id_thirdparty_from_phone`. They're primarily used for converting legacy user login submissions to "identifier" dicts ([see spec](https://matrix.org/docs/spec/client_server/r0.6.1#post-matrix-client-r0-login)). Identifying information such as usernames or 3PID information used to be top-level in the login body. They're now supposed to be put inside an [identifier](https://matrix.org/docs/spec/client_server/r0.6.1#identifier-types) parameter instead.
#7438's purpose is to allow using the new identifier parameter during User-Interactive Authentication, which is currently handled in AuthHandler. That's why I've moved these helper methods there. I also moved the refactoring of these method from #7438 as they're relevant.
This ensures systemctl start matrix-synapse returns only after synapse
is actually started, which is very useful for automated deployments.
Fixes#5761
Signed-off-by: Dexter Chua <dec41@srcf.net>
#8174 removed the `is_guest` parameter from `get_room_data`, at the same time that #8157 was merged using it, colliding together to break unit tests on develop.
This PR removes the `is_guest` parameter from the call in the broken test.
Uses the same changelog as #8174.
Small cleanup PR.
* Removed the unused `is_guest` argument
* Added a safeguard to a (currently) impossible code path, fixing static checking at the same time.
- Convert additional templates from inline HTML to Jinja2 templates. ([\#8444](https://github.com/matrix-org/synapse/issues/8444))
Bugfixes
--------
- Fix a regression in v1.21.0rc1 which broke thumbnails of remote media. ([\#8438](https://github.com/matrix-org/synapse/issues/8438))
- Do not expose the experimental `uk.half-shot.msc2778.login.application_service` flow in the login API, which caused a compatibility problem with Element iOS. ([\#8440](https://github.com/matrix-org/synapse/issues/8440))
- Fix malformed log line in new federation "catch up" logic. ([\#8442](https://github.com/matrix-org/synapse/issues/8442))
- Fix DB query on startup for negative streams which caused long start up times. Introduced in [\#8374](https://github.com/matrix-org/synapse/issues/8374). ([\#8447](https://github.com/matrix-org/synapse/issues/8447))
Synapse 1.21.0rc1 (2020-10-01)
==============================
Features
--------
- Require the user to confirm that their password should be reset after clicking the email confirmation link. ([\#8004](https://github.com/matrix-org/synapse/issues/8004))
- Add an admin API `GET /_synapse/admin/v1/event_reports` to read entries of table `event_reports`. Contributed by @dklimpel. ([\#8217](https://github.com/matrix-org/synapse/issues/8217))
- Consolidate the SSO error template across all configuration. ([\#8248](https://github.com/matrix-org/synapse/issues/8248), [\#8405](https://github.com/matrix-org/synapse/issues/8405))
- Add a configuration option to specify a whitelist of domains that a user can be redirected to after validating their email or phone number. ([\#8275](https://github.com/matrix-org/synapse/issues/8275), [\#8417](https://github.com/matrix-org/synapse/issues/8417))
- Add experimental support for sharding event persister. ([\#8294](https://github.com/matrix-org/synapse/issues/8294), [\#8387](https://github.com/matrix-org/synapse/issues/8387), [\#8396](https://github.com/matrix-org/synapse/issues/8396), [\#8419](https://github.com/matrix-org/synapse/issues/8419))
- Add the room topic and avatar to the room details admin API. ([\#8305](https://github.com/matrix-org/synapse/issues/8305))
- Add an admin API for querying rooms where a user is a member. Contributed by @dklimpel. ([\#8306](https://github.com/matrix-org/synapse/issues/8306))
- Add `uk.half-shot.msc2778.login.application_service` login type to allow appservices to login. ([\#8320](https://github.com/matrix-org/synapse/issues/8320))
- Add a configuration option that allows existing users to log in with OpenID Connect. Contributed by @BBBSnowball and @OmmyZhang. ([\#8345](https://github.com/matrix-org/synapse/issues/8345))
- Add prometheus metrics for replication requests. ([\#8406](https://github.com/matrix-org/synapse/issues/8406))
- Support passing additional single sign-on parameters to the client. ([\#8413](https://github.com/matrix-org/synapse/issues/8413))
- Add experimental reporting of metrics on expensive rooms for state-resolution. ([\#8420](https://github.com/matrix-org/synapse/issues/8420))
- Add experimental prometheus metric to track numbers of "large" rooms for state resolutiom. ([\#8425](https://github.com/matrix-org/synapse/issues/8425))
- Add prometheus metrics to track federation delays. ([\#8430](https://github.com/matrix-org/synapse/issues/8430))
Bugfixes
--------
- Fix a bug in the media repository where remote thumbnails with the same size but different crop methods would overwrite each other. Contributed by @deepbluev7. ([\#7124](https://github.com/matrix-org/synapse/issues/7124))
- Fix inconsistent handling of non-existent push rules, and stop tracking the `enabled` state of removed push rules. ([\#7796](https://github.com/matrix-org/synapse/issues/7796))
- Fix a longstanding bug when storing a media file with an empty `upload_name`. ([\#7905](https://github.com/matrix-org/synapse/issues/7905))
- Fix messages not being sent over federation until an event is sent into the same room. ([\#8230](https://github.com/matrix-org/synapse/issues/8230), [\#8247](https://github.com/matrix-org/synapse/issues/8247), [\#8258](https://github.com/matrix-org/synapse/issues/8258), [\#8272](https://github.com/matrix-org/synapse/issues/8272), [\#8322](https://github.com/matrix-org/synapse/issues/8322))
- Fix a longstanding bug where files that could not be thumbnailed would result in an Internal Server Error. ([\#8236](https://github.com/matrix-org/synapse/issues/8236), [\#8435](https://github.com/matrix-org/synapse/issues/8435))
- Upgrade minimum version of `canonicaljson` to version 1.4.0, to fix an unicode encoding issue. ([\#8262](https://github.com/matrix-org/synapse/issues/8262))
- Fix longstanding bug which could lead to incomplete database upgrades on SQLite. ([\#8265](https://github.com/matrix-org/synapse/issues/8265))
- Fix stack overflow when stderr is redirected to the logging system, and the logging system encounters an error. ([\#8268](https://github.com/matrix-org/synapse/issues/8268))
- Fix a bug which cause the logging system to report errors, if `DEBUG` was enabled and no `context` filter was applied. ([\#8278](https://github.com/matrix-org/synapse/issues/8278))
- Fix edge case where push could get delayed for a user until a later event was pushed. ([\#8287](https://github.com/matrix-org/synapse/issues/8287))
- Fix fetching malformed events from remote servers. ([\#8324](https://github.com/matrix-org/synapse/issues/8324))
- Fix `UnboundLocalError` from occuring when appservices send a malformed register request. ([\#8329](https://github.com/matrix-org/synapse/issues/8329))
- Don't send push notifications to expired user accounts. ([\#8353](https://github.com/matrix-org/synapse/issues/8353))
- Fix a regression in v1.19.0 with reactivating users through the admin API. ([\#8362](https://github.com/matrix-org/synapse/issues/8362))
- Fix a bug where during device registration the length of the device name wasn't limited. ([\#8364](https://github.com/matrix-org/synapse/issues/8364))
- Include `guest_access` in the fields that are checked for null bytes when updating `room_stats_state`. Broke in v1.7.2. ([\#8373](https://github.com/matrix-org/synapse/issues/8373))
- Fix theoretical race condition where events are not sent down `/sync` if the synchrotron worker is restarted without restarting other workers. ([\#8374](https://github.com/matrix-org/synapse/issues/8374))
- Fix a bug which could cause errors in rooms with malformed membership events, on servers using sqlite. ([\#8385](https://github.com/matrix-org/synapse/issues/8385))
- Fix "Re-starting finished log context" warning when receiving an event we already had over federation. ([\#8398](https://github.com/matrix-org/synapse/issues/8398))
- Fix incorrect handling of timeouts on outgoing HTTP requests. ([\#8400](https://github.com/matrix-org/synapse/issues/8400))
- Fix a regression in v1.20.0 in the `synapse_port_db` script regarding the `ui_auth_sessions_ips` table. ([\#8410](https://github.com/matrix-org/synapse/issues/8410))
- Remove unnecessary 3PID registration check when resetting password via an email address. Bug introduced in v0.34.0rc2. ([\#8414](https://github.com/matrix-org/synapse/issues/8414))
Improved Documentation
----------------------
- Add `/_synapse/client` to the reverse proxy documentation. ([\#8227](https://github.com/matrix-org/synapse/issues/8227))
- Add note to the reverse proxy settings documentation about disabling Apache's mod_security2. Contributed by Julian Fietkau (@jfietkau). ([\#8375](https://github.com/matrix-org/synapse/issues/8375))
- Improve description of `server_name` config option in `homserver.yaml`. ([\#8415](https://github.com/matrix-org/synapse/issues/8415))
Deprecations and Removals
-------------------------
- Drop support for `prometheus_client` older than 0.4.0. ([\#8426](https://github.com/matrix-org/synapse/issues/8426))
Internal Changes
----------------
- Fix tests on distros which disable TLSv1.0. Contributed by @danc86. ([\#8208](https://github.com/matrix-org/synapse/issues/8208))
- Simplify the distributor code to avoid unnecessary work. ([\#8216](https://github.com/matrix-org/synapse/issues/8216))
- Remove the `populate_stats_process_rooms_2` background job and restore functionality to `populate_stats_process_rooms`. ([\#8243](https://github.com/matrix-org/synapse/issues/8243))
- Clean up type hints for `PaginationConfig`. ([\#8250](https://github.com/matrix-org/synapse/issues/8250), [\#8282](https://github.com/matrix-org/synapse/issues/8282))
- Track the latest event for every destination and room for catch-up after federation outage. ([\#8256](https://github.com/matrix-org/synapse/issues/8256))
- Fix non-user visible bug in implementation of `MultiWriterIdGenerator.get_current_token_for_writer`. ([\#8257](https://github.com/matrix-org/synapse/issues/8257))
- Switch to the JSON implementation from the standard library. ([\#8259](https://github.com/matrix-org/synapse/issues/8259))
- Add type hints to `synapse.util.async_helpers`. ([\#8260](https://github.com/matrix-org/synapse/issues/8260))
- Simplify tests that mock asynchronous functions. ([\#8261](https://github.com/matrix-org/synapse/issues/8261))
- Add type hints to `StreamToken` and `RoomStreamToken` classes. ([\#8279](https://github.com/matrix-org/synapse/issues/8279))
- Change `StreamToken.room_key` to be a `RoomStreamToken` instance. ([\#8281](https://github.com/matrix-org/synapse/issues/8281))
- Refactor notifier code to correctly use the max event stream position. ([\#8288](https://github.com/matrix-org/synapse/issues/8288))
- Use slotted classes where possible. ([\#8296](https://github.com/matrix-org/synapse/issues/8296))
- Support testing the local Synapse checkout against the [Complement homeserver test suite](https://github.com/matrix-org/complement/). ([\#8317](https://github.com/matrix-org/synapse/issues/8317))
- Update outdated usages of `metaclass` to python 3 syntax. ([\#8326](https://github.com/matrix-org/synapse/issues/8326))
- Move lint-related dependencies to package-extra field, update CONTRIBUTING.md to utilise this. ([\#8330](https://github.com/matrix-org/synapse/issues/8330), [\#8377](https://github.com/matrix-org/synapse/issues/8377))
- Use the `admin_patterns` helper in additional locations. ([\#8331](https://github.com/matrix-org/synapse/issues/8331))
- Fix test logging to allow braces in log output. ([\#8335](https://github.com/matrix-org/synapse/issues/8335))
- Remove `__future__` imports related to Python 2 compatibility. ([\#8337](https://github.com/matrix-org/synapse/issues/8337))
- Simplify `super()` calls to Python 3 syntax. ([\#8344](https://github.com/matrix-org/synapse/issues/8344))
- Fix bad merge from `release-v1.20.0` branch to `develop`. ([\#8354](https://github.com/matrix-org/synapse/issues/8354))
- Factor out a `_send_dummy_event_for_room` method. ([\#8370](https://github.com/matrix-org/synapse/issues/8370))
- Improve logging of state resolution. ([\#8371](https://github.com/matrix-org/synapse/issues/8371))
- Add type annotations to `SimpleHttpClient`. ([\#8372](https://github.com/matrix-org/synapse/issues/8372))
- Refactor ID generators to use `async with` syntax. ([\#8383](https://github.com/matrix-org/synapse/issues/8383))
- Create a mechanism for marking tests "logcontext clean". ([\#8399](https://github.com/matrix-org/synapse/issues/8399))
- A pair of tiny cleanups in the federation request code. ([\#8401](https://github.com/matrix-org/synapse/issues/8401))
- Add checks on startup that PostgreSQL sequences are consistent with their associated tables. ([\#8402](https://github.com/matrix-org/synapse/issues/8402))
- Do not include appservice users when calculating the total MAU for a server. ([\#8404](https://github.com/matrix-org/synapse/issues/8404))
- Typing fixes for `synapse.handlers.federation`. ([\#8422](https://github.com/matrix-org/synapse/issues/8422))
- Various refactors to simplify stream token handling. ([\#8423](https://github.com/matrix-org/synapse/issues/8423))
- Make stream token serializing/deserializing async. ([\#8427](https://github.com/matrix-org/synapse/issues/8427))
Synapse 1.20.1 (2020-09-24)
===========================
Bugfixes
--------
- Fix a bug introduced in v1.20.0 which caused the `synapse_port_db` script to fail. ([\#8386](https://github.com/matrix-org/synapse/issues/8386))
- Fix a bug introduced in v1.20.0 which caused variables to be incorrectly escaped in Jinja2 templates. ([\#8394](https://github.com/matrix-org/synapse/issues/8394))
(`:`) in the `client_secret` parameter of various endpoints. The incorrect
behaviour was allowed for backwards compatibility, but is now being removed
from Synapse as most users have updated their client. Further context can be
found at [\#6766](https://github.com/matrix-org/synapse/issues/6766).
Historically, the [Synapse Admin
API](https://github.com/matrix-org/synapse/tree/master/docs) has been
accessible under the `/_matrix/client/api/v1/admin`,
`/_matrix/client/unstable/admin`, `/_matrix/client/r0/admin` and
`/_synapse/admin` prefixes. In a future release, we will be dropping support
for accessing Synapse's Admin API using the `/_matrix/client/*` prefixes. This
makes it easier for homeserver admins to lock down external access to the Admin
API endpoints.
Synapse 1.20.0rc5 (2020-09-18)
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
Synapse 1.19.3 (2020-09-18)
===========================
Bugfixes
--------
- Partially mitigate bug where newly joined servers couldn't get past events in a room when there is a malformed event. ([\#8350](https://github.com/matrix-org/synapse/issues/8350))
Synapse 1.20.0rc4 (2020-09-16)
==============================
Synapse 1.20.0rc4 is identical to 1.20.0rc3, with the addition of the security fix that was included in 1.19.2.
Synapse 1.19.2 (2020-09-16)
===========================
Due to the issue below server admins are encouraged to upgrade as soon as possible.
Bugfixes
--------
- Fix joining rooms over federation that include malformed events. ([\#8324](https://github.com/matrix-org/synapse/issues/8324))
Synapse 1.20.0rc3 (2020-09-11)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
Synapse 1.20.0rc2 (2020-09-09)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 causing some features related to notifications to misbehave following the implementation of unread counts. ([\#8280](https://github.com/matrix-org/synapse/issues/8280))
Synapse 1.20.0rc1 (2020-09-08)
==============================
Removal warning
---------------
Some older clients used a [disallowed character](https://matrix.org/docs/spec/client_server/r0.6.1#post-matrix-client-r0-register-email-requesttoken) (`:`) in the `client_secret` parameter of various endpoints. The incorrect behaviour was allowed for backwards compatibility, but is now being removed from Synapse as most users have updated their client. Further context can be found at [\#6766](https://github.com/matrix-org/synapse/issues/6766).
Features
--------
- Add an endpoint to query your shared rooms with another user as an implementation of [MSC2666](https://github.com/matrix-org/matrix-doc/pull/2666). ([\#7785](https://github.com/matrix-org/synapse/issues/7785))
- Iteratively encode JSON to avoid blocking the reactor. ([\#8013](https://github.com/matrix-org/synapse/issues/8013), [\#8116](https://github.com/matrix-org/synapse/issues/8116))
- Add support for shadow-banning users (ignoring any message send requests). ([\#8034](https://github.com/matrix-org/synapse/issues/8034), [\#8092](https://github.com/matrix-org/synapse/issues/8092), [\#8095](https://github.com/matrix-org/synapse/issues/8095), [\#8142](https://github.com/matrix-org/synapse/issues/8142), [\#8152](https://github.com/matrix-org/synapse/issues/8152), [\#8157](https://github.com/matrix-org/synapse/issues/8157), [\#8158](https://github.com/matrix-org/synapse/issues/8158), [\#8176](https://github.com/matrix-org/synapse/issues/8176))
- Use the default template file when its equivalent is not found in a custom template directory. ([\#8037](https://github.com/matrix-org/synapse/issues/8037), [\#8107](https://github.com/matrix-org/synapse/issues/8107), [\#8252](https://github.com/matrix-org/synapse/issues/8252))
- Add unread messages count to sync responses, as specified in [MSC2654](https://github.com/matrix-org/matrix-doc/pull/2654). ([\#8059](https://github.com/matrix-org/synapse/issues/8059), [\#8254](https://github.com/matrix-org/synapse/issues/8254), [\#8270](https://github.com/matrix-org/synapse/issues/8270), [\#8274](https://github.com/matrix-org/synapse/issues/8274))
- Optimise `/federation/v1/user/devices/` API by only returning devices with encryption keys. ([\#8198](https://github.com/matrix-org/synapse/issues/8198))
Bugfixes
--------
- Fix a memory leak by limiting the length of time that messages will be queued for a remote server that has been unreachable. ([\#7864](https://github.com/matrix-org/synapse/issues/7864))
- Synapse now correctly enforces the valid characters in the `client_secret` parameter used in various endpoints. ([\#8101](https://github.com/matrix-org/synapse/issues/8101))
- Fix a bug introduced in v1.7.2 impacting message retention policies that would allow federated homeservers to dictate a retention period that's lower than the configured minimum allowed duration in the configuration file. ([\#8104](https://github.com/matrix-org/synapse/issues/8104))
- Fix a long-standing bug where invalid JSON would be accepted by Synapse. ([\#8106](https://github.com/matrix-org/synapse/issues/8106))
- Fix a bug introduced in Synapse v1.12.0 which could cause `/sync` requests to fail with a 404 if you had a very old outstanding room invite. ([\#8110](https://github.com/matrix-org/synapse/issues/8110))
- Return a proper error code when the rooms of an invalid group are requested. ([\#8129](https://github.com/matrix-org/synapse/issues/8129))
- Fix a bug which could cause a leaked postgres connection if synapse was set to daemonize. ([\#8131](https://github.com/matrix-org/synapse/issues/8131))
- Clarify the error code if a user tries to register with a numeric ID. This bug was introduced in v1.15.0. ([\#8135](https://github.com/matrix-org/synapse/issues/8135))
- Fix a bug where appservices with ratelimiting disabled would still be ratelimited when joining rooms. This bug was introduced in v1.19.0. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix logging in via OpenID Connect with a provider that uses integer user IDs. ([\#8190](https://github.com/matrix-org/synapse/issues/8190))
- Fix a longstanding bug where user directory updates could break when unexpected profile data was included in events. ([\#8223](https://github.com/matrix-org/synapse/issues/8223))
- Fix a longstanding bug where stats updates could break when unexpected profile data was included in events. ([\#8226](https://github.com/matrix-org/synapse/issues/8226))
- Fix slow start times for large servers by removing a table scan of the `users` table from startup code. ([\#8271](https://github.com/matrix-org/synapse/issues/8271))
Updates to the Docker image
---------------------------
- Fix builds of the Docker image on non-x86 platforms. ([\#8144](https://github.com/matrix-org/synapse/issues/8144))
- Added curl for healthcheck support and readme updates for the change. Contributed by @maquis196. ([\#8147](https://github.com/matrix-org/synapse/issues/8147))
Improved Documentation
----------------------
- Link to matrix-synapse-rest-password-provider in the password provider documentation. ([\#8111](https://github.com/matrix-org/synapse/issues/8111))
- Updated documentation to note that Synapse does not follow `HTTP 308` redirects due to an upstream library not supporting them. Contributed by Ryan Cole. ([\#8120](https://github.com/matrix-org/synapse/issues/8120))
- Explain better what GDPR-erased means when deactivating a user. ([\#8189](https://github.com/matrix-org/synapse/issues/8189))
Internal Changes
----------------
- Add filter `name` to the `/users` admin API, which filters by user ID or displayname. Contributed by Awesome Technologies Innovationslabor GmbH. ([\#7377](https://github.com/matrix-org/synapse/issues/7377), [\#8163](https://github.com/matrix-org/synapse/issues/8163))
- Reduce run times of some unit tests by advancing the reactor a fewer number of times. ([\#7757](https://github.com/matrix-org/synapse/issues/7757))
- Don't fail `/submit_token` requests on incorrect session ID if `request_token_inhibit_3pid_errors` is turned on. ([\#7991](https://github.com/matrix-org/synapse/issues/7991))
- Convert various parts of the codebase to async/await. ([\#8071](https://github.com/matrix-org/synapse/issues/8071), [\#8072](https://github.com/matrix-org/synapse/issues/8072), [\#8074](https://github.com/matrix-org/synapse/issues/8074), [\#8075](https://github.com/matrix-org/synapse/issues/8075), [\#8076](https://github.com/matrix-org/synapse/issues/8076), [\#8087](https://github.com/matrix-org/synapse/issues/8087), [\#8100](https://github.com/matrix-org/synapse/issues/8100), [\#8119](https://github.com/matrix-org/synapse/issues/8119), [\#8121](https://github.com/matrix-org/synapse/issues/8121), [\#8133](https://github.com/matrix-org/synapse/issues/8133), [\#8156](https://github.com/matrix-org/synapse/issues/8156), [\#8162](https://github.com/matrix-org/synapse/issues/8162), [\#8166](https://github.com/matrix-org/synapse/issues/8166), [\#8168](https://github.com/matrix-org/synapse/issues/8168), [\#8173](https://github.com/matrix-org/synapse/issues/8173), [\#8191](https://github.com/matrix-org/synapse/issues/8191), [\#8192](https://github.com/matrix-org/synapse/issues/8192), [\#8193](https://github.com/matrix-org/synapse/issues/8193), [\#8194](https://github.com/matrix-org/synapse/issues/8194), [\#8195](https://github.com/matrix-org/synapse/issues/8195), [\#8197](https://github.com/matrix-org/synapse/issues/8197), [\#8199](https://github.com/matrix-org/synapse/issues/8199), [\#8200](https://github.com/matrix-org/synapse/issues/8200), [\#8201](https://github.com/matrix-org/synapse/issues/8201), [\#8202](https://github.com/matrix-org/synapse/issues/8202), [\#8207](https://github.com/matrix-org/synapse/issues/8207), [\#8213](https://github.com/matrix-org/synapse/issues/8213), [\#8214](https://github.com/matrix-org/synapse/issues/8214))
- Remove some unused database functions. ([\#8085](https://github.com/matrix-org/synapse/issues/8085))
- Add type hints to various parts of the codebase. ([\#8090](https://github.com/matrix-org/synapse/issues/8090), [\#8127](https://github.com/matrix-org/synapse/issues/8127), [\#8187](https://github.com/matrix-org/synapse/issues/8187), [\#8241](https://github.com/matrix-org/synapse/issues/8241), [\#8140](https://github.com/matrix-org/synapse/issues/8140), [\#8183](https://github.com/matrix-org/synapse/issues/8183), [\#8232](https://github.com/matrix-org/synapse/issues/8232), [\#8235](https://github.com/matrix-org/synapse/issues/8235), [\#8237](https://github.com/matrix-org/synapse/issues/8237), [\#8244](https://github.com/matrix-org/synapse/issues/8244))
- Return the previous stream token if a non-member event is a duplicate. ([\#8093](https://github.com/matrix-org/synapse/issues/8093), [\#8112](https://github.com/matrix-org/synapse/issues/8112))
- Separate `get_current_token` into two since there are two different use cases for it. ([\#8113](https://github.com/matrix-org/synapse/issues/8113))
- Reduce the amount of whitespace in JSON stored and sent in responses. ([\#8124](https://github.com/matrix-org/synapse/issues/8124))
- Update the test federation client to handle streaming responses. ([\#8130](https://github.com/matrix-org/synapse/issues/8130))
- Micro-optimisations to `get_auth_chain_ids`. ([\#8132](https://github.com/matrix-org/synapse/issues/8132))
- Refactor `StreamIdGenerator` and `MultiWriterIdGenerator` to have the same interface. ([\#8161](https://github.com/matrix-org/synapse/issues/8161))
- Add functions to `MultiWriterIdGen` used by events stream. ([\#8164](https://github.com/matrix-org/synapse/issues/8164), [\#8179](https://github.com/matrix-org/synapse/issues/8179))
- Fix tests that were broken due to the merge of 1.19.1. ([\#8167](https://github.com/matrix-org/synapse/issues/8167))
- Make `SlavedIdTracker.advance` have the same interface as `MultiWriterIDGenerator`. ([\#8171](https://github.com/matrix-org/synapse/issues/8171))
- Remove unused `is_guest` parameter from, and add safeguard to, `MessageHandler.get_room_data`. ([\#8174](https://github.com/matrix-org/synapse/issues/8174), [\#8181](https://github.com/matrix-org/synapse/issues/8181))
- Standardize the mypy configuration. ([\#8175](https://github.com/matrix-org/synapse/issues/8175))
- Refactor some of `LoginRestServlet`'s helper methods, and move them to `AuthHandler` for easier reuse. ([\#8182](https://github.com/matrix-org/synapse/issues/8182))
- Fix `wait_for_stream_position` to allow multiple waiters on same stream ID. ([\#8196](https://github.com/matrix-org/synapse/issues/8196))
- Make `MultiWriterIDGenerator` work for streams that use negative values. ([\#8203](https://github.com/matrix-org/synapse/issues/8203))
- Refactor queries for device keys and cross-signatures. ([\#8204](https://github.com/matrix-org/synapse/issues/8204), [\#8205](https://github.com/matrix-org/synapse/issues/8205), [\#8222](https://github.com/matrix-org/synapse/issues/8222), [\#8224](https://github.com/matrix-org/synapse/issues/8224), [\#8225](https://github.com/matrix-org/synapse/issues/8225), [\#8231](https://github.com/matrix-org/synapse/issues/8231), [\#8233](https://github.com/matrix-org/synapse/issues/8233), [\#8234](https://github.com/matrix-org/synapse/issues/8234))
- Fix type hints for functions decorated with `@cached`. ([\#8240](https://github.com/matrix-org/synapse/issues/8240))
- Remove obsolete `order` field from federation send queues. ([\#8245](https://github.com/matrix-org/synapse/issues/8245))
- Stop sub-classing from object. ([\#8249](https://github.com/matrix-org/synapse/issues/8249))
- Add more logging to debug slow startup. ([\#8264](https://github.com/matrix-org/synapse/issues/8264))
- Do not attempt to upgrade database schema on worker processes. ([\#8266](https://github.com/matrix-org/synapse/issues/8266), [\#8276](https://github.com/matrix-org/synapse/issues/8276))
Fix a bug introduced in v1.7.2 impacting message retention policies that would allow federated homeservers to dictate a retention period that's lower than the configured minimum allowed duration in the configuration file.
Updated documentation to note that Synapse does not follow `HTTP 308` redirects due to an upstream library not supporting them. Contributed by Ryan Cole.
**NOTE**: ensure the `nocanon` options are included.
**NOTE 2**: It appears that Synapse is currently incompatible with the ModSecurity module for Apache (`mod_security2`). If you need it enabled for other services on your web server, you can disable it for Synapse's two VirtualHosts by including the following lines before each of the two `</VirtualHost>` above:
```
<IfModule security2_module>
SecRuleEngine off
</IfModule>
```
### HAProxy
```
@@ -119,6 +138,7 @@ frontend https
# Matrix client traffic
acl matrix-host hdr(host) -i matrix.example.com
acl matrix-path path_beg /_matrix
acl matrix-path path_beg /_synapse/client
use_backend matrix if matrix-host matrix-path
@@ -146,3 +166,10 @@ connecting to Synapse from a client.
Synapse exposes a health check endpoint for use by reverse proxies.
Each configured HTTP listener has a `/health` endpoint which always returns
200 OK (and doesn't get logged).
## Synapse administration endpoints
Endpoints for administering your Synapse instance are placed under
`/_synapse/admin`. These require authentication through an access token of an
admin user. However as access to these endpoints grants the caller a lot of power,
we do not recommend exposing them to the public internet without good reason.
"""Wraps a IHostnameResolver, limiting the number of in-flight DNS lookups.
"""
@@ -402,7 +409,7 @@ class _LimitedHostnameResolver(object):
yielddeferred
class_DeferredResolutionReceiver(object):
class_DeferredResolutionReceiver:
"""Wraps a IResolutionReceiver and simply resolves the given deferred when
resolution is complete
"""
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
