WIP

.buildkite/.env

@@ -1,13 +0,0 @@
-CI
-BUILDKITE
-BUILDKITE_BUILD_NUMBER
-BUILDKITE_BRANCH
-BUILDKITE_BUILD_NUMBER
-BUILDKITE_JOB_ID
-BUILDKITE_BUILD_URL
-BUILDKITE_PROJECT_SLUG
-BUILDKITE_COMMIT
-BUILDKITE_PULL_REQUEST
-BUILDKITE_TAG
-CODECOV_TOKEN
-TRIAL_FLAGS

.buildkite/docker-compose.py35.pg95.yaml

@@ -1,22 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:9.5
-    environment:
-      POSTGRES_PASSWORD: postgres
-    command: -c fsync=off
-
-  testenv:
-    image: python:3.5
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /src
-    volumes:
-      - ..:/src

.buildkite/docker-compose.py37.pg11.yaml

@@ -1,22 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:11
-    environment:
-      POSTGRES_PASSWORD: postgres
-    command: -c fsync=off
-
-  testenv:
-    image: python:3.7
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /src
-    volumes:
-      - ..:/src

.buildkite/docker-compose.py37.pg95.yaml

@@ -1,22 +0,0 @@
-version: '3.1'
-
-services:
-
-  postgres:
-    image: postgres:9.5
-    environment:
-      POSTGRES_PASSWORD: postgres
-    command: -c fsync=off
-
-  testenv:
-    image: python:3.7
-    depends_on:
-      - postgres
-    env_file: .env
-    environment:
-      SYNAPSE_POSTGRES_HOST: postgres
-      SYNAPSE_POSTGRES_USER: postgres
-      SYNAPSE_POSTGRES_PASSWORD: postgres
-    working_dir: /src
-    volumes:
-      - ..:/src

.buildkite/merge_base_branch.sh

@@ -1,33 +0,0 @@
-#!/usr/bin/env bash
-
-set -ex
-
-if [[ "$BUILDKITE_BRANCH" =~ ^(develop|master|dinsic|shhs|release-.*)$ ]]; then
-    echo "Not merging forward, as this is a release branch"
-    exit 0
-fi
-
-if [[ -z $BUILDKITE_PULL_REQUEST_BASE_BRANCH ]]; then
-    echo "Not a pull request, or hasn't had a PR opened yet..."
-
-    # It probably hasn't had a PR opened yet. Since all PRs land on develop, we
-    # can probably assume it's based on it and will be merged into it.
-    GITBASE="develop"
-else
-    # Get the reference, using the GitHub API
-    GITBASE=$BUILDKITE_PULL_REQUEST_BASE_BRANCH
-fi
-
-# Show what we are before
-git --no-pager show -s
-
-# Set up username so it can do a merge
-git config --global user.email bot@matrix.org
-git config --global user.name "A robot"
-
-# Fetch and merge. If it doesn't work, it will raise due to set -e.
-git fetch -u origin $GITBASE
-git merge --no-edit --no-commit origin/$GITBASE
-
-# Show what we are after.
-git --no-pager show -s

.buildkite/postgres-config.yaml

@@ -1,21 +0,0 @@
-# Configuration file used for testing the 'synapse_port_db' script.
-# Tells the script to connect to the postgresql database that will be available in the
-# CI's Docker setup at the point where this file is considered.
-server_name: "test"
-
-signing_key_path: "/src/.buildkite/test.signing.key"
-
-report_stats: false
-
-database:
-  name: "psycopg2"
-  args:
-    user: postgres
-    host: postgres
-    password: postgres
-    database: synapse
-
-# Suppress the key server warning.
-trusted_key_servers:
-  - server_name: "matrix.org"
-suppress_key_server_warning: true

.buildkite/scripts/create_postgres_db.py

@@ -1,36 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: utf-8 -*-
-# Copyright 2019 The Matrix.org Foundation C.I.C.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-import logging
-from synapse.storage.engines import create_engine
-
-logger = logging.getLogger("create_postgres_db")
-
-if __name__ == "__main__":
-    # Create a PostgresEngine.
-    db_engine = create_engine({"name": "psycopg2", "args": {}})
-
-    # Connect to postgres to create the base database.
-    # We use "postgres" as a database because it's bound to exist and the "synapse" one
-    # doesn't exist yet.
-    db_conn = db_engine.module.connect(
-        user="postgres", host="postgres", password="postgres", dbname="postgres"
-    )
-    db_conn.autocommit = True
-    cur = db_conn.cursor()
-    cur.execute("CREATE DATABASE synapse;")
-    cur.close()
-    db_conn.close()

.buildkite/scripts/test_synapse_port_db.sh

@@ -1,36 +0,0 @@
-#!/bin/bash
-#
-# Test script for 'synapse_port_db', which creates a virtualenv, installs Synapse along
-# with additional dependencies needed for the test (such as coverage or the PostgreSQL
-# driver), update the schema of the test SQLite database and run background updates on it,
-# create an empty test database in PostgreSQL, then run the 'synapse_port_db' script to
-# test porting the SQLite database to the PostgreSQL database (with coverage).
-
-set -xe
-cd `dirname $0`/../..
-
-echo "--- Install dependencies"
-
-# Install dependencies for this test.
-pip install psycopg2 coverage coverage-enable-subprocess
-
-# Install Synapse itself. This won't update any libraries.
-pip install -e .
-
-echo "--- Generate the signing key"
-
-# Generate the server's signing key.
-python -m synapse.app.homeserver --generate-keys -c .buildkite/sqlite-config.yaml
-
-echo "--- Prepare the databases"
-
-# Make sure the SQLite3 database is using the latest schema and has no pending background update.
-scripts-dev/update_database --database-config .buildkite/sqlite-config.yaml
-
-# Create the PostgreSQL database.
-./.buildkite/scripts/create_postgres_db.py
-
-echo "+++ Run synapse_port_db"
-
-# Run the script
-coverage run scripts/synapse_port_db --sqlite-database .buildkite/test_db.db --postgres-config .buildkite/postgres-config.yaml

.buildkite/sqlite-config.yaml

@@ -1,18 +0,0 @@
-# Configuration file used for testing the 'synapse_port_db' script.
-# Tells the 'update_database' script to connect to the test SQLite database to upgrade its
-# schema and run background updates on it.
-server_name: "test"
-
-signing_key_path: "/src/.buildkite/test.signing.key"
-
-report_stats: false
-
-database:
-  name: "sqlite3"
-  args:
-    database: ".buildkite/test_db.db"
-
-# Suppress the key server warning.
-trusted_key_servers:
-  - server_name: "matrix.org"
-suppress_key_server_warning: true

.buildkite/worker-blacklist

@@ -1,30 +0,0 @@
-# This file serves as a blacklist for SyTest tests that we expect will fail in
-# Synapse when run under worker mode. For more details, see sytest-blacklist.
-
-Message history can be paginated
-
-Can re-join room if re-invited
-
-/upgrade creates a new room
-
-The only membership state included in an initial sync is for all the senders in the timeline
-
-Local device key changes get to remote servers
-
-If remote user leaves room we no longer receive device updates
-
-Forgotten room messages cannot be paginated
-
-Inbound federation can get public room list
-
-Members from the gap are included in gappy incr LL sync
-
-Leaves are present in non-gapped incremental syncs
-
-Old leaves are present in gapped incremental syncs
-
-User sees updates to presence from other users in the incremental sync.
-
-Gapped incremental syncs include all state changes
-
-Old members are included in gappy incr LL sync if they start speaking

.circleci/config.yml

@@ -4,7 +4,8 @@ jobs:
     machine: true
     steps:
       - checkout
-      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:${CIRCLE_TAG} -t matrixdotorg/synapse:${CIRCLE_TAG}-py3 .
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:${CIRCLE_TAG} .
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:${CIRCLE_TAG}-py3 --build-arg PYTHON_VERSION=3.6 .
       - run: docker login --username $DOCKER_HUB_USERNAME --password $DOCKER_HUB_PASSWORD
       - run: docker push matrixdotorg/synapse:${CIRCLE_TAG}
       - run: docker push matrixdotorg/synapse:${CIRCLE_TAG}-py3
@@ -12,15 +13,149 @@ jobs:
     machine: true
     steps:
       - checkout
-      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:latest -t matrixdotorg/synapse:latest-py3 .
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:latest .
+      - run: docker build -f docker/Dockerfile --label gitsha1=${CIRCLE_SHA1} -t matrixdotorg/synapse:latest-py3 --build-arg PYTHON_VERSION=3.6 .
       - run: docker login --username $DOCKER_HUB_USERNAME --password $DOCKER_HUB_PASSWORD
       - run: docker push matrixdotorg/synapse:latest
       - run: docker push matrixdotorg/synapse:latest-py3
+  sytestpy2:
+    docker:
+      - image: matrixdotorg/sytest-synapsepy2
+    working_directory: /src
+    steps:
+      - checkout
+      - run: /synapse_sytest.sh
+      - store_artifacts:
+          path: /logs
+          destination: logs
+      - store_test_results:
+          path: /logs
+  sytestpy2postgres:
+    docker:
+      - image: matrixdotorg/sytest-synapsepy2
+    working_directory: /src
+    steps:
+      - checkout
+      - run: POSTGRES=1 /synapse_sytest.sh
+      - store_artifacts:
+          path: /logs
+          destination: logs
+      - store_test_results:
+          path: /logs
+  sytestpy2merged:
+    docker:
+      - image: matrixdotorg/sytest-synapsepy2
+    working_directory: /src
+    steps:
+      - checkout
+      - run: bash .circleci/merge_base_branch.sh
+      - run: /synapse_sytest.sh
+      - store_artifacts:
+          path: /logs
+          destination: logs
+      - store_test_results:
+          path: /logs
+  sytestpy2postgresmerged:
+    docker:
+      - image: matrixdotorg/sytest-synapsepy2
+    working_directory: /src
+    steps:
+      - checkout
+      - run: bash .circleci/merge_base_branch.sh
+      - run: POSTGRES=1 /synapse_sytest.sh
+      - store_artifacts:
+          path: /logs
+          destination: logs
+      - store_test_results:
+          path: /logs
+
+  sytestpy3:
+    docker:
+      - image: matrixdotorg/sytest-synapsepy3
+    working_directory: /src
+    steps:
+      - checkout
+      - run: /synapse_sytest.sh
+      - store_artifacts:
+          path: /logs
+          destination: logs
+      - store_test_results:
+          path: /logs
+  sytestpy3postgres:
+    docker:
+      - image: matrixdotorg/sytest-synapsepy3
+    working_directory: /src
+    steps:
+      - checkout
+      - run: POSTGRES=1 /synapse_sytest.sh
+      - store_artifacts:
+          path: /logs
+          destination: logs
+      - store_test_results:
+          path: /logs
+  sytestpy3merged:
+    docker:
+      - image: matrixdotorg/sytest-synapsepy3
+    working_directory: /src
+    steps:
+      - checkout
+      - run: bash .circleci/merge_base_branch.sh
+      - run: /synapse_sytest.sh
+      - store_artifacts:
+          path: /logs
+          destination: logs
+      - store_test_results:
+          path: /logs
+  sytestpy3postgresmerged:
+    docker:
+      - image: matrixdotorg/sytest-synapsepy3
+    working_directory: /src
+    steps:
+      - checkout
+      - run: bash .circleci/merge_base_branch.sh
+      - run: POSTGRES=1 /synapse_sytest.sh
+      - store_artifacts:
+          path: /logs
+          destination: logs
+      - store_test_results:
+          path: /logs
 
 workflows:
   version: 2
   build:
     jobs:
+      - sytestpy2:
+          filters:
+            branches:
+              only: /develop|master|release-.*/
+      - sytestpy2postgres:
+          filters:
+            branches:
+              only: /develop|master|release-.*/
+      - sytestpy3:
+          filters:
+            branches:
+              only: /develop|master|release-.*/
+      - sytestpy3postgres:
+          filters:
+            branches:
+              only: /develop|master|release-.*/
+      - sytestpy2merged:
+          filters:
+            branches:
+              ignore: /develop|master|release-.*/
+      - sytestpy2postgresmerged:
+          filters:
+            branches:
+              ignore: /develop|master|release-.*/
+      - sytestpy3merged:
+          filters:
+            branches:
+              ignore: /develop|master|release-.*/
+      - sytestpy3postgresmerged:
+          filters:
+            branches:
+              ignore: /develop|master|release-.*/
       - dockerhubuploadrelease:
           filters:
             tags:

.circleci/merge_base_branch.sh

@@ -0,0 +1,34 @@
+#!/usr/bin/env bash
+
+set -e
+
+# CircleCI doesn't give CIRCLE_PR_NUMBER in the environment for non-forked PRs. Wonderful.
+# In this case, we just need to do some ~shell magic~ to strip it out of the PULL_REQUEST URL.
+echo 'export CIRCLE_PR_NUMBER="${CIRCLE_PR_NUMBER:-${CIRCLE_PULL_REQUEST##*/}}"' >> $BASH_ENV
+source $BASH_ENV
+
+if [[ -z "${CIRCLE_PR_NUMBER}" ]]
+then
+    echo "Can't figure out what the PR number is! Assuming merge target is develop."
+
+    # It probably hasn't had a PR opened yet. Since all PRs land on develop, we
+    # can probably assume it's based on it and will be merged into it.
+    GITBASE="develop"
+else
+    # Get the reference, using the GitHub API
+    GITBASE=`wget -O- https://api.github.com/repos/matrix-org/synapse/pulls/${CIRCLE_PR_NUMBER} | jq -r '.base.ref'`
+fi
+
+# Show what we are before
+git --no-pager show -s
+
+# Set up username so it can do a merge
+git config --global user.email bot@matrix.org
+git config --global user.name "A robot"
+
+# Fetch and merge. If it doesn't work, it will raise due to set -e.
+git fetch -u origin $GITBASE
+git merge --no-edit origin/$GITBASE
+
+# Show what we are after.
+git --no-pager show -s

.codecov.yml

@@ -1,4 +1,5 @@
-comment: off
+comment:
+  layout: "diff"
 
 coverage:
   status:

.coveragerc

@@ -1,8 +1,7 @@
 [run]
 branch = True
 parallel = True
-include=$TOP/synapse/*
-data_file = $TOP/.coverage
+include = synapse/*
 
 [report]
 precision = 2

.dockerignore

@@ -1,13 +1,9 @@
-# ignore everything by default
-*
-
-# things to include
-!docker
-!scripts
-!synapse
-!MANIFEST.in
-!README.rst
-!setup.py
-!synctl
-
-**/__pycache__
+Dockerfile
+.travis.yml
+.gitignore
+demo/etc
+tox.ini
+.git/*
+.tox/*
+debian/matrix-synapse/
+debian/matrix-synapse-*/

.github/FUNDING.yml

@@ -1,4 +0,0 @@
-# One username per supported platform and one custom link
-patreon: matrixdotorg
-liberapay: matrixdotorg
-custom: https://paypal.me/matrixdotorg

.github/ISSUE_TEMPLATE/BUG_REPORT.md

@@ -4,10 +4,10 @@ about: Create a report to help us improve
 
 ---
 
-<!--
+<!-- 
 
-**IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**:
-You will likely get better support more quickly if you ask in ** #synapse:matrix.org ** ;)
+**IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**: 
+You will likely get better support more quickly if you ask in ** #matrix:matrix.org ** ;)
 
 
 This is a bug report template. By following the instructions below and
@@ -17,7 +17,7 @@ the necessary data to fix your issue.
 You can also preview your report before submitting it. You may remove sections
 that aren't relevant to your particular case.
 
-Text between <!-- and --​> marks will be invisible in the report.
+Text between <!-- and --> marks will be invisible in the report.
 
 -->
 
@@ -31,7 +31,7 @@ Text between <!-- and --​> marks will be invisible in the report.
 - that reproduce the bug
 - using hyphens as bullet points
 
-<!--
+<!-- 
 Describe how what happens differs from what you expected.
 
 If you can identify any relevant log snippets from _homeserver.log_, please include
@@ -44,26 +44,22 @@ those (please be careful to remove any personal or private data). Please surroun
 <!-- IMPORTANT: please answer the following questions, to help us narrow down the problem -->
 
 <!-- Was this issue identified on matrix.org or another homeserver? -->
-- **Homeserver**:
+- **Homeserver**: 
 
 If not matrix.org:
 
-<!--
- What version of Synapse is running?
-
-You can find the Synapse version with this command:
-
-$ curl http://localhost:8008/_synapse/admin/v1/server_version
-
-(You may need to replace `localhost:8008` if Synapse is not configured to
-listen on that port.)
+<!-- 
+What version of Synapse is running? 
+You can find the Synapse version by inspecting the server headers (replace matrix.org with
+your own homeserver domain):
+$ curl -v https://matrix.org/_matrix/client/versions 2>&1 | grep "Server:"
 -->
-- **Version**:
+- **Version**: 
 
-- **Install method**:
+- **Install method**: 
 <!-- examples: package manager/git clone/pip  -->
 
-- **Platform**:
+- **Platform**: 
 <!--
 Tell us about the environment in which your homeserver is operating
 distro, hardware, if it's running in a vm/container, etc.

.github/ISSUE_TEMPLATE/SUPPORT_REQUEST.md

@@ -4,7 +4,6 @@ about: I need support for Synapse
 
 ---
 
-Please don't file github issues asking for support.
+# Please ask for support in [**#matrix:matrix.org**](https://matrix.to/#/#matrix:matrix.org)
 
-Instead, please join [`#synapse:matrix.org`](https://matrix.to/#/#synapse:matrix.org)
-(from a matrix.org account if necessary), and ask there.
+## Don't file an issue as a support request.

.github/PULL_REQUEST_TEMPLATE.md

@@ -5,4 +5,3 @@
 * [ ] Pull request is based on the develop branch
 * [ ] Pull request includes a [changelog file](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.rst#changelog)
 * [ ] Pull request includes a [sign off](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.rst#sign-off)
-* [ ] Code style is correct (run the [linters](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.rst#code-style))

.github/SUPPORT.md

@@ -1,3 +1,3 @@
-[**#synapse:matrix.org**](https://matrix.to/#/#synapse:matrix.org) is the official support room for
-Synapse, and can be accessed by any client from https://matrix.org/docs/projects/try-matrix-now.html.
-Please ask for support there, rather than filing github issues.
+[**#matrix:matrix.org**](https://matrix.to/#/#matrix:matrix.org) is the official support room for Matrix, and can be accessed by any client from https://matrix.org/docs/projects/try-matrix-now.html 
+
+It can also be access via IRC bridge at irc://irc.freenode.net/matrix or on the web here: https://webchat.freenode.net/?channels=matrix

.gitignore

@@ -1,44 +1,64 @@
-# filename patterns
-*~
-.*.swp
-.#*
-*.deb
-*.egg
-*.egg-info
-*.lock
 *.pyc
-*.snap
-*.tac
+.*.swp
+*~
+*.lock
+
+.DS_Store
 _trial_temp/
 _trial_temp*/
-/out
+logs/
+dbs/
+*.egg
+dist/
+docs/build/
+*.egg-info
+pip-wheel-metadata/
 
-# stuff that is likely to exist when you run a server locally
-/*.db
-/*.log
-/*.log.config
-/*.pid
-/.python-version
-/*.signing.key
-/env/
+cmdclient_config.json
+homeserver*.db
+homeserver*.log
+homeserver*.log.*
+homeserver*.pid
 /homeserver*.yaml
-/logs
-/media_store/
-/uploads
 
-# IDEs
-/.idea/
-/.ropeproject/
-/.vscode/
+*.signing.key
+*.tls.crt
+*.tls.dh
+*.tls.key
 
-# build products
-!/.coveragerc
-/.coverage*
-/.mypy_cache/
-/.tox
-/build/
-/coverage.*
-/dist/
-/docs/build/
-/htmlcov
-/pip-wheel-metadata/
+.coverage*
+coverage.*
+!.coveragerc
+htmlcov
+
+demo/*/*.db
+demo/*/*.log
+demo/*/*.log.*
+demo/*/*.pid
+demo/media_store.*
+demo/etc
+
+uploads
+cache
+
+.idea/
+media_store/
+
+*.tac
+
+build/
+venv/
+venv*/
+*venv/
+
+localhost-800*/
+static/client/register/register_config.js
+.tox
+
+env/
+*.config
+
+.vscode/
+.ropeproject/
+*.deb
+/debs

.travis.yml

@@ -0,0 +1,83 @@
+sudo: false
+language: python
+
+cache:
+  directories:
+    # we only bother to cache the wheels; parts of the http cache get
+    # invalidated every build (because they get served with a max-age of 600
+    # seconds), which means that we end up re-uploading the whole cache for
+    # every build, which is time-consuming In any case, it's not obvious that
+    # downloading the cache from S3 would be much faster than downloading the
+    # originals from pypi.
+    #
+    - $HOME/.cache/pip/wheels
+
+addons:
+  postgresql: "9.4"
+
+# don't clone the whole repo history, one commit will do
+git:
+  depth: 1
+
+# only build branches we care about (PRs are built seperately)
+branches:
+  only:
+    - master
+    - develop
+    - /^release-v/
+
+# When running the tox environments that call Twisted Trial, we can pass the -j
+# flag to run the tests concurrently. We set this to 2 for CPU bound tests
+# (SQLite) and 4 for I/O bound tests (PostgreSQL).
+matrix:
+  fast_finish: true
+  include:
+  - python: 2.7
+    env: TOX_ENV=packaging
+
+  - python: 3.6
+    env: TOX_ENV="pep8,check_isort"
+
+  - python: 2.7
+    env: TOX_ENV=py27,codecov TRIAL_FLAGS="-j 2"
+
+  - python: 2.7
+    env: TOX_ENV=py27-old TRIAL_FLAGS="-j 2"
+
+  - python: 2.7
+    env: TOX_ENV=py27-postgres,codecov TRIAL_FLAGS="-j 4"
+    services:
+      - postgresql
+
+  - python: 3.5
+    env: TOX_ENV=py35,codecov TRIAL_FLAGS="-j 2"
+
+  - python: 3.6
+    env: TOX_ENV=py36,codecov TRIAL_FLAGS="-j 2"
+
+  - python: 3.6
+    env: TOX_ENV=py36-postgres,codecov TRIAL_FLAGS="-j 4"
+    services:
+      - postgresql
+
+  - # we only need to check for the newsfragment if it's a PR build
+    if: type = pull_request
+    python: 3.6
+    env: TOX_ENV=check-newsfragment
+    script:
+      - git remote set-branches --add origin develop
+      - git fetch origin develop
+      - tox -e $TOX_ENV
+
+install:
+  - pip install tox
+  
+  # if we don't have python3.6 in this environment, travis unhelpfully gives us
+  # a `python3.6` on our path which does nothing but spit out a warning. Tox
+  # tries to run it (even if we're not running a py36 env), so the build logs
+  # then have warnings which look like errors. To reduce the noise, remove the
+  # non-functional python3.6.
+  - ( ! command -v python3.6 || python3.6 --version ) &>/dev/null || rm -f $(command -v python3.6)
+
+script:
+  - tox -e $TOX_ENV

AUTHORS.rst

@@ -1,8 +1,34 @@
-The following is an incomplete list of people outside the core team who have
-contributed to Synapse. It is no longer maintained: more recent contributions
-are listed in the `changelog <CHANGES.md>`_.
+Erik Johnston <erik at matrix.org>
+ * HS core
+ * Federation API impl
 
-----
+Mark Haines <mark at matrix.org>
+ * HS core
+ * Crypto
+ * Content repository
+ * CS v2 API impl
+
+Kegan Dougal <kegan at matrix.org>
+ * HS core
+ * CS v1 API impl
+ * AS API impl
+
+Paul "LeoNerd" Evans <paul at matrix.org>
+ * HS core
+ * Presence
+ * Typing Notifications
+ * Performance metrics and caching layer
+
+Dave Baker <dave at matrix.org>
+ * Push notifications
+ * Auth CS v2 impl
+
+Matthew Hodgson <matthew at matrix.org>
+ * General doc & housekeeping
+ * Vertobot/vertobridge matrix<->verto PoC
+
+Emmanuel Rohee <manu at matrix.org>
+ * Supporting iOS clients (testability and fallback registration)
 
 Turned to Dust <dwinslow86 at gmail.com>
  * ArchLinux installation instructions
@@ -36,13 +62,10 @@ Christoph Witzany <christoph at web.crofting.com>
  * Add LDAP support for authentication
 
 Pierre Jaury <pierre at jaury.eu>
- * Docker packaging
+* Docker packaging
 
 Serban Constantin <serban.constantin at gmail dot com>
  * Small bug fix
 
-Joseph Weston <joseph at weston.cloud>
- * Add admin API for querying HS version
-
-Benjamin Saunders <ben.e.saunders at gmail dot com>
- * Documentation improvements
+Jason Robinson <jasonr at matrix.org>
+ * Minor fixes

CONTRIBUTING.rst

@@ -30,19 +30,21 @@ use github's pull request workflow to review the contribution, and either ask
 you to make any refinements needed or merge it and make them ourselves. The
 changes will then land on master when we next do a release.
 
-We use `Buildkite <https://buildkite.com/matrix-dot-org/synapse>`_ for
-continuous integration.  Buildkite builds need to be authorised by a
-maintainer. If your change breaks the build, this will be shown in GitHub, so
-please keep an eye on the pull request for feedback.
+We use `CircleCI <https://circleci.com/gh/matrix-org>`_ and `Travis CI 
+<https://travis-ci.org/matrix-org/synapse>`_ for continuous integration. All
+pull requests to synapse get automatically tested by Travis and CircleCI.
+If your change breaks the build, this will be shown in GitHub, so please
+keep an eye on the pull request for feedback.
 
 To run unit tests in a local development environment, you can use:
 
-- ``tox -e py35`` (requires tox to be installed by ``pip install tox``)
-  for SQLite-backed Synapse on Python 3.5.
+- ``tox -e py27`` (requires tox to be installed by ``pip install tox``) for
+  SQLite-backed Synapse on Python 2.7.
+- ``tox -e py35`` for SQLite-backed Synapse on Python 3.5.
 - ``tox -e py36`` for SQLite-backed Synapse on Python 3.6.
-- ``tox -e py36-postgres`` for PostgreSQL-backed Synapse on Python 3.6
+- ``tox -e py27-postgres`` for PostgreSQL-backed Synapse on Python 2.7
   (requires a running local PostgreSQL with access to create databases).
-- ``./test_postgresql.sh`` for PostgreSQL-backed Synapse on Python 3.5
+- ``./test_postgresql.sh`` for PostgreSQL-backed Synapse on Python 2.7
   (requires Docker). Entirely self-contained, recommended if you don't want to
   set up PostgreSQL yourself.
 
@@ -56,31 +58,12 @@ Code style
 
 All Matrix projects have a well-defined code-style - and sometimes we've even
 got as far as documenting it... For instance, synapse's code style doc lives
-at https://github.com/matrix-org/synapse/tree/master/docs/code_style.md.
-
-To facilitate meeting these criteria you can run ``scripts-dev/lint.sh``
-locally. Since this runs the tools listed in the above document, you'll need
-python 3.6 and to install each tool. **Note that the script does not just
-test/check, but also reformats code, so you may wish to ensure any new code is
-committed first**. By default this script checks all files and can take some
-time; if you alter only certain files, you might wish to specify paths as
-arguments to reduce the run-time.
+at https://github.com/matrix-org/synapse/tree/master/docs/code_style.rst.
 
 Please ensure your changes match the cosmetic style of the existing project,
 and **never** mix cosmetic and functional changes in the same commit, as it
 makes it horribly hard to review otherwise.
 
-Before doing a commit, ensure the changes you've made don't produce
-linting errors. You can do this by running the linters as follows. Ensure to
-commit any files that were corrected.
-
-::
-    # Install the dependencies
-    pip install -U black flake8 isort
-    
-    # Run the linter script
-    ./scripts-dev/lint.sh
-
 Changelog
 ~~~~~~~~~
 
@@ -88,50 +71,30 @@ All changes, even minor ones, need a corresponding changelog / newsfragment
 entry. These are managed by Towncrier
 (https://github.com/hawkowl/towncrier).
 
-To create a changelog entry, make a new file in the ``changelog.d`` file named
-in the format of ``PRnumber.type``. The type can be one of the following:
-
-* ``feature``.
-* ``bugfix``.
-* ``docker`` (for updates to the Docker image).
-* ``doc`` (for updates to the documentation).
-* ``removal`` (also used for deprecations).
-* ``misc`` (for internal-only changes).
-
-The content of the file is your changelog entry, which should be a short
-description of your change in the same style as the rest of our `changelog
-<https://github.com/matrix-org/synapse/blob/master/CHANGES.md>`_. The file can
-contain Markdown formatting, and should end with a full stop ('.') for
-consistency.
-
-Adding credits to the changelog is encouraged, we value your
-contributions and would like to have you shouted out in the release notes!
+To create a changelog entry, make a new file in the ``changelog.d``
+file named in the format of ``PRnumber.type``. The type can be
+one of ``feature``, ``bugfix``, ``removal`` (also used for
+deprecations), or ``misc`` (for internal-only changes). The content of
+the file is your changelog entry, which can contain Markdown
+formatting. Adding credits to the changelog is encouraged, we value
+your contributions and would like to have you shouted out in the
+release notes!
 
 For example, a fix in PR #1234 would have its changelog entry in
 ``changelog.d/1234.bugfix``, and contain content like "The security levels of
 Florbs are now validated when recieved over federation. Contributed by Jane
-Matrix.".
+Matrix".
 
-Debian changelog
-----------------
+Attribution
+~~~~~~~~~~~
 
-Changes which affect the debian packaging files (in ``debian``) are an
-exception.
-
-In this case, you will need to add an entry to the debian changelog for the
-next release. For this, run the following command::
-
-  dch
-
-This will make up a new version number (if there isn't already an unreleased
-version in flight), and open an editor where you can add a new changelog entry.
-(Our release process will ensure that the version number and maintainer name is
-corrected for the release.)
-
-If your change affects both the debian packaging *and* files outside the debian
-directory, you will need both a regular newsfragment *and* an entry in the
-debian changelog. (Though typically such changes should be submitted as two
-separate pull requests.)
+Everyone who contributes anything to Matrix is welcome to be listed in the
+AUTHORS.rst file for the project in question. Please feel free to include a
+change to AUTHORS.rst in your pull request to list yourself and a short
+description of the area(s) you've worked on. Also, we sometimes have swag to
+give away to contributors - if you feel that Matrix-branded apparel is missing
+from your life, please mail us your shipping address to matrix at matrix.org and
+we'll try to fix it :)
 
 Sign off
 ~~~~~~~~

INSTALL.md

@@ -1,473 +0,0 @@
-- [Choosing your server name](#choosing-your-server-name)
-- [Installing Synapse](#installing-synapse)
-  - [Installing from source](#installing-from-source)
-    - [Platform-Specific Instructions](#platform-specific-instructions)
-    - [Troubleshooting Installation](#troubleshooting-installation)
-  - [Prebuilt packages](#prebuilt-packages)
-- [Setting up Synapse](#setting-up-synapse)
-  - [TLS certificates](#tls-certificates)
-  - [Email](#email)
-  - [Registering a user](#registering-a-user)
-  - [Setting up a TURN server](#setting-up-a-turn-server)
-  - [URL previews](#url-previews)
-
-# Choosing your server name
-
-It is important to choose the name for your server before you install Synapse,
-because it cannot be changed later.
-
-The server name determines the "domain" part of user-ids for users on your
-server: these will all be of the format `@user:my.domain.name`. It also
-determines how other matrix servers will reach yours for federation.
-
-For a test configuration, set this to the hostname of your server. For a more
-production-ready setup, you will probably want to specify your domain
-(`example.com`) rather than a matrix-specific hostname here (in the same way
-that your email address is probably `user@example.com` rather than
-`user@email.example.com`) - but doing so may require more advanced setup: see
-[Setting up Federation](docs/federate.md).
-
-# Installing Synapse
-
-## Installing from source
-
-(Prebuilt packages are available for some platforms - see [Prebuilt packages](#prebuilt-packages).)
-
-System requirements:
-
-- POSIX-compliant system (tested on Linux & OS X)
-- Python 3.5, 3.6, 3.7 or 3.8.
-- At least 1GB of free RAM if you want to join large public rooms like #matrix:matrix.org
-
-Synapse is written in Python but some of the libraries it uses are written in
-C. So before we can install Synapse itself we need a working C compiler and the
-header files for Python C extensions. See [Platform-Specific
-Instructions](#platform-specific-instructions) for information on installing
-these on various platforms.
-
-To install the Synapse homeserver run:
-
-```
-mkdir -p ~/synapse
-virtualenv -p python3 ~/synapse/env
-source ~/synapse/env/bin/activate
-pip install --upgrade pip
-pip install --upgrade setuptools
-pip install matrix-synapse
-```
-
-This will download Synapse from [PyPI](https://pypi.org/project/matrix-synapse)
-and install it, along with the python libraries it uses, into a virtual environment
-under `~/synapse/env`.  Feel free to pick a different directory if you
-prefer.
-
-This Synapse installation can then be later upgraded by using pip again with the
-update flag:
-
-```
-source ~/synapse/env/bin/activate
-pip install -U matrix-synapse
-```
-
-Before you can start Synapse, you will need to generate a configuration
-file. To do this, run (in your virtualenv, as before)::
-
-```
-cd ~/synapse
-python -m synapse.app.homeserver \
-    --server-name my.domain.name \
-    --config-path homeserver.yaml \
-    --generate-config \
-    --report-stats=[yes|no]
-```
-
-... substituting an appropriate value for `--server-name`.
-
-This command will generate you a config file that you can then customise, but it will
-also generate a set of keys for you. These keys will allow your Home Server to
-identify itself to other Home Servers, so don't lose or delete them. It would be
-wise to back them up somewhere safe. (If, for whatever reason, you do need to
-change your Home Server's keys, you may find that other Home Servers have the
-old key cached. If you update the signing key, you should change the name of the
-key in the `<server name>.signing.key` file (the second word) to something
-different. See the
-[spec](https://matrix.org/docs/spec/server_server/latest.html#retrieving-server-keys)
-for more information on key management.)
-
-To actually run your new homeserver, pick a working directory for Synapse to
-run (e.g. `~/synapse`), and::
-
-    cd ~/synapse
-    source env/bin/activate
-    synctl start
-
-### Platform-Specific Instructions
-
-#### Debian/Ubuntu/Raspbian
-
-Installing prerequisites on Ubuntu or Debian:
-
-```
-sudo apt-get install build-essential python3-dev libffi-dev \
-                     python-pip python-setuptools sqlite3 \
-                     libssl-dev python-virtualenv libjpeg-dev libxslt1-dev
-```
-
-#### ArchLinux
-
-Installing prerequisites on ArchLinux:
-
-```
-sudo pacman -S base-devel python python-pip \
-               python-setuptools python-virtualenv sqlite3
-```
-
-#### CentOS/Fedora
-
-Installing prerequisites on CentOS 7 or Fedora 25:
-
-```
-sudo yum install libtiff-devel libjpeg-devel libzip-devel freetype-devel \
-                 lcms2-devel libwebp-devel tcl-devel tk-devel redhat-rpm-config \
-                 python-virtualenv libffi-devel openssl-devel
-sudo yum groupinstall "Development Tools"
-```
-
-#### Mac OS X
-
-Installing prerequisites on Mac OS X:
-
-```
-xcode-select --install
-sudo easy_install pip
-sudo pip install virtualenv
-brew install pkg-config libffi
-```
-
-#### OpenSUSE
-
-Installing prerequisites on openSUSE:
-
-```
-sudo zypper in -t pattern devel_basis
-sudo zypper in python-pip python-setuptools sqlite3 python-virtualenv \
-               python-devel libffi-devel libopenssl-devel libjpeg62-devel
-```
-
-#### OpenBSD
-
-Installing prerequisites on OpenBSD:
-
-```
-doas pkg_add python libffi py-pip py-setuptools sqlite3 py-virtualenv \
-              libxslt jpeg
-```
-
-There is currently no port for OpenBSD. Additionally, OpenBSD's security
-settings require a slightly more difficult installation process.
-
-XXX: I suspect this is out of date.
-
-1. Create a new directory in `/usr/local` called `_synapse`. Also, create a
-   new user called `_synapse` and set that directory as the new user's home.
-   This is required because, by default, OpenBSD only allows binaries which need
-   write and execute permissions on the same memory space to be run from
-   `/usr/local`.
-2. `su` to the new `_synapse` user and change to their home directory.
-3. Create a new virtualenv: `virtualenv -p python2.7 ~/.synapse`
-4. Source the virtualenv configuration located at
-   `/usr/local/_synapse/.synapse/bin/activate`. This is done in `ksh` by
-   using the `.` command, rather than `bash`'s `source`.
-5. Optionally, use `pip` to install `lxml`, which Synapse needs to parse
-   webpages for their titles.
-6. Use `pip` to install this repository: `pip install matrix-synapse`
-7. Optionally, change `_synapse`'s shell to `/bin/false` to reduce the
-   chance of a compromised Synapse server being used to take over your box.
-
-After this, you may proceed with the rest of the install directions.
-
-#### Windows
-
-If you wish to run or develop Synapse on Windows, the Windows Subsystem For
-Linux provides a Linux environment on Windows 10 which is capable of using the
-Debian, Fedora, or source installation methods. More information about WSL can
-be found at https://docs.microsoft.com/en-us/windows/wsl/install-win10 for
-Windows 10 and https://docs.microsoft.com/en-us/windows/wsl/install-on-server
-for Windows Server.
-
-### Troubleshooting Installation
-
-XXX a bunch of this is no longer relevant.
-
-Synapse requires pip 8 or later, so if your OS provides too old a version you
-may need to manually upgrade it::
-
-    sudo pip install --upgrade pip
-
-Installing may fail with `Could not find any downloads that satisfy the requirement pymacaroons-pynacl (from matrix-synapse==0.12.0)`.
-You can fix this by manually upgrading pip and virtualenv::
-
-    sudo pip install --upgrade virtualenv
-
-You can next rerun `virtualenv -p python3 synapse` to update the virtual env.
-
-Installing may fail during installing virtualenv with `InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning.`
-You can fix this  by manually installing ndg-httpsclient::
-
-    pip install --upgrade ndg-httpsclient
-
-Installing may fail with `mock requires setuptools>=17.1. Aborting installation`.
-You can fix this by upgrading setuptools::
-
-    pip install --upgrade setuptools
-
-If pip crashes mid-installation for reason (e.g. lost terminal), pip may
-refuse to run until you remove the temporary installation directory it
-created. To reset the installation::
-
-    rm -rf /tmp/pip_install_matrix
-
-pip seems to leak *lots* of memory during installation.  For instance, a Linux
-host with 512MB of RAM may run out of memory whilst installing Twisted.  If this
-happens, you will have to individually install the dependencies which are
-failing, e.g.::
-
-    pip install twisted
-
-## Prebuilt packages
-
-As an alternative to installing from source, prebuilt packages are available
-for a number of platforms.
-
-### Docker images and Ansible playbooks
-
-There is an offical synapse image available at
-https://hub.docker.com/r/matrixdotorg/synapse which can be used with
-the docker-compose file available at [contrib/docker](contrib/docker). Further information on
-this including configuration options is available in the README on
-hub.docker.com.
-
-Alternatively, Andreas Peters (previously Silvio Fricke) has contributed a
-Dockerfile to automate a synapse server in a single Docker image, at
-https://hub.docker.com/r/avhost/docker-matrix/tags/
-
-Slavi Pantaleev has created an Ansible playbook,
-which installs the offical Docker image of Matrix Synapse
-along with many other Matrix-related services (Postgres database, riot-web, coturn, mxisd, SSL support, etc.).
-For more details, see
-https://github.com/spantaleev/matrix-docker-ansible-deploy
-
-
-### Debian/Ubuntu
-
-#### Matrix.org packages
-
-Matrix.org provides Debian/Ubuntu packages of the latest stable version of
-Synapse via https://packages.matrix.org/debian/. They are available for Debian
-9 (Stretch), Ubuntu 16.04 (Xenial), and later. To use them:
-
-```
-sudo apt install -y lsb-release wget apt-transport-https
-sudo wget -O /usr/share/keyrings/matrix-org-archive-keyring.gpg https://packages.matrix.org/debian/matrix-org-archive-keyring.gpg
-echo "deb [signed-by=/usr/share/keyrings/matrix-org-archive-keyring.gpg] https://packages.matrix.org/debian/ $(lsb_release -cs) main" |
-    sudo tee /etc/apt/sources.list.d/matrix-org.list
-sudo apt update
-sudo apt install matrix-synapse-py3
-```
-
-**Note**: if you followed a previous version of these instructions which
-recommended using `apt-key add` to add an old key from
-`https://matrix.org/packages/debian/`, you should note that this key has been
-revoked. You should remove the old key with `sudo apt-key remove
-C35EB17E1EAE708E6603A9B3AD0592FE47F0DF61`, and follow the above instructions to
-update your configuration.
-
-The fingerprint of the repository signing key (as shown by `gpg
-/usr/share/keyrings/matrix-org-archive-keyring.gpg`) is
-`AAF9AE843A7584B5A3E4CD2BCF45A512DE2DA058`.
-
-#### Downstream Debian/Ubuntu packages
-
-For `buster` and `sid`, Synapse is available in the Debian repositories and
-it should be possible to install it with simply:
-
-```
-    sudo apt install matrix-synapse
-```
-
-There is also a version of `matrix-synapse` in `stretch-backports`. Please see
-the [Debian documentation on
-backports](https://backports.debian.org/Instructions/) for information on how
-to use them.
-
-We do not recommend using the packages in downstream Ubuntu at this time, as
-they are old and suffer from known security vulnerabilities.
-
-### Fedora
-
-Synapse is in the Fedora repositories as `matrix-synapse`:
-
-```
-sudo dnf install matrix-synapse
-```
-
-Oleg Girko provides Fedora RPMs at
-https://obs.infoserver.lv/project/monitor/matrix-synapse
-
-### OpenSUSE
-
-Synapse is in the OpenSUSE repositories as `matrix-synapse`:
-
-```
-sudo zypper install matrix-synapse
-```
-
-### SUSE Linux Enterprise Server
-
-Unofficial package are built for SLES 15 in the openSUSE:Backports:SLE-15 repository at
-https://download.opensuse.org/repositories/openSUSE:/Backports:/SLE-15/standard/
-
-### ArchLinux
-
-The quickest way to get up and running with ArchLinux is probably with the community package
-https://www.archlinux.org/packages/community/any/matrix-synapse/, which should pull in most of
-the necessary dependencies.
-
-pip may be outdated (6.0.7-1 and needs to be upgraded to 6.0.8-1 ):
-
-```
-sudo pip install --upgrade pip
-```
-
-If you encounter an error with lib bcrypt causing an Wrong ELF Class:
-ELFCLASS32 (x64 Systems), you may need to reinstall py-bcrypt to correctly
-compile it under the right architecture. (This should not be needed if
-installing under virtualenv):
-
-```
-sudo pip uninstall py-bcrypt
-sudo pip install py-bcrypt
-```
-
-### Void Linux
-
-Synapse can be found in the void repositories as 'synapse':
-
-    xbps-install -Su
-    xbps-install -S synapse
-
-### FreeBSD
-
-Synapse can be installed via FreeBSD Ports or Packages contributed by Brendan Molloy from:
-
- - Ports: `cd /usr/ports/net-im/py-matrix-synapse && make install clean`
- - Packages: `pkg install py27-matrix-synapse`
-
-
-### NixOS
-
-Robin Lambertz has packaged Synapse for NixOS at:
-https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/matrix-synapse.nix
-
-# Setting up Synapse
-
-Once you have installed synapse as above, you will need to configure it.
-
-## TLS certificates
-
-The default configuration exposes a single HTTP port: http://localhost:8008. It
-is suitable for local testing, but for any practical use, you will either need
-to enable a reverse proxy, or configure Synapse to expose an HTTPS port.
-
-For information on using a reverse proxy, see
-[docs/reverse_proxy.md](docs/reverse_proxy.md).
-
-To configure Synapse to expose an HTTPS port, you will need to edit
-`homeserver.yaml`, as follows:
-
-* First, under the `listeners` section, uncomment the configuration for the
-  TLS-enabled listener. (Remove the hash sign (`#`) at the start of
-  each line). The relevant lines are like this:
-
-  ```
-    - port: 8448
-      type: http
-      tls: true
-      resources:
-        - names: [client, federation]
-  ```
-* You will also need to uncomment the `tls_certificate_path` and
-  `tls_private_key_path` lines under the `TLS` section. You can either
-  point these settings at an existing certificate and key, or you can
-  enable Synapse's built-in ACME (Let's Encrypt) support. Instructions
-  for having Synapse automatically provision and renew federation
-  certificates through ACME can be found at [ACME.md](docs/ACME.md). If you
-  are using your own certificate, be sure to use a `.pem` file that includes
-  the full certificate chain including any intermediate certificates (for
-  instance, if using certbot, use `fullchain.pem` as your certificate, not
-  `cert.pem`).
-
-For a more detailed guide to configuring your server for federation, see
-[federate.md](docs/federate.md)
-
-
-## Email
-
-It is desirable for Synapse to have the capability to send email. This allows
-Synapse to send password reset emails, send verifications when an email address
-is added to a user's account, and send email notifications to users when they
-receive new messages.
-
-To configure an SMTP server for Synapse, modify the configuration section
-headed `email`, and be sure to have at least the `smtp_host`, `smtp_port`
-and `notif_from` fields filled out.  You may also need to set `smtp_user`,
-`smtp_pass`, and `require_transport_security`.
-
-If email is not configured, password reset, registration and notifications via
-email will be disabled.
-
-## Registering a user
-
-The easiest way to create a new user is to do so from a client like [Riot](https://riot.im).
-
-Alternatively you can do so from the command line if you have installed via pip.
-
-This can be done as follows:
-
-```
-$ source ~/synapse/env/bin/activate
-$ synctl start # if not already running
-$ register_new_matrix_user -c homeserver.yaml http://localhost:8008
-New user localpart: erikj
-Password:
-Confirm password:
-Make admin [no]:
-Success!
-```
-
-This process uses a setting `registration_shared_secret` in
-`homeserver.yaml`, which is shared between Synapse itself and the
-`register_new_matrix_user` script. It doesn't matter what it is (a random
-value is generated by `--generate-config`), but it should be kept secret, as
-anyone with knowledge of it can register users, including admin accounts,
-on your server even if `enable_registration` is `false`.
-
-## Setting up a TURN server
-
-For reliable VoIP calls to be routed via this homeserver, you MUST configure
-a TURN server.  See [docs/turn-howto.md](docs/turn-howto.md) for details.
-
-## URL previews
-
-Synapse includes support for previewing URLs, which is disabled by default.  To
-turn it on you must enable the `url_preview_enabled: True` config parameter
-and explicitly specify the IP ranges that Synapse is not allowed to spider for
-previewing in the `url_preview_ip_range_blacklist` configuration parameter.
-This is critical from a security perspective to stop arbitrary Matrix users
-spidering 'internal' URLs on your network.  At the very least we recommend that
-your loopback and RFC1918 IP addresses are blacklisted.
-
-This also requires the optional lxml and netaddr python dependencies to be
-installed.  This in turn requires the libxml2 library to be available - on
-Debian/Ubuntu this means `apt-get install libxml2-dev`, or equivalent for
-your OS.

MANIFEST.in

@@ -8,21 +8,15 @@ include demo/demo.tls.dh
 include demo/*.py
 include demo/*.sh
 
-recursive-include synapse/storage *.sql
-recursive-include synapse/storage *.sql.postgres
-recursive-include synapse/storage *.sql.sqlite
-recursive-include synapse/storage *.py
-recursive-include synapse/storage *.txt
-recursive-include synapse/storage *.md
+recursive-include synapse/storage/schema *.sql
+recursive-include synapse/storage/schema *.py
 
 recursive-include docs *
 recursive-include scripts *
 recursive-include scripts-dev *
 recursive-include synapse *.pyi
+recursive-include tests *.pem
 recursive-include tests *.py
-include tests/http/ca.crt
-include tests/http/ca.key
-include tests/http/server.key
 
 recursive-include synapse/res *
 recursive-include synapse/static *.css
@@ -34,19 +28,17 @@ exclude Dockerfile
 exclude .dockerignore
 exclude test_postgresql.sh
 exclude .editorconfig
-exclude sytest-blacklist
 
 include pyproject.toml
 recursive-include changelog.d *
 
-prune .buildkite
-prune .circleci
-prune .codecov.yml
-prune .coveragerc
 prune .github
-prune debian
 prune demo/etc
 prune docker
-prune mypy.ini
-prune snap
-prune stubs
+prune .circleci
+prune .coveragerc
+prune debian
+prune .codecov.yml
+
+exclude jenkins*
+recursive-exclude jenkins *.sh

README.rst

@@ -4,15 +4,15 @@ Introduction
 ============
 
 Matrix is an ambitious new ecosystem for open federated Instant Messaging and
-VoIP.  The basics you need to know to get up and running are:
+VoIP. The basics you need to know to get up and running are:
 
-- Everything in Matrix happens in a room.  Rooms are distributed and do not
-  exist on any single server.  Rooms can be located using convenience aliases
+- Everything in Matrix happens in a room. Rooms are distributed and do not
+  exist on any single server. Rooms can be located using convenience aliases
   like ``#matrix:matrix.org`` or ``#test:localhost:8448``.
 
 - Matrix user IDs look like ``@matthew:matrix.org`` (although in the future
   you will normally refer to yourself and others using a third party identifier
-  (3PID): email address, phone number, etc rather than manipulating Matrix user IDs)
+  (3PID): email address, phone number, etc rather than manipulating Matrix user IDs).
 
 The overall architecture is::
 
@@ -26,6 +26,7 @@ via IRC bridge at irc://irc.freenode.net/matrix.
 Synapse is currently in rapid development, but as of version 0.5 we believe it
 is sufficiently stable to be run as an internet-facing service for real usage!
 
+
 About Matrix
 ============
 
@@ -80,30 +81,321 @@ Thanks for using Matrix!
 Synapse Installation
 ====================
 
-.. _federation:
+Synapse is the reference Python/Twisted Matrix homeserver implementation.
 
-* For details on how to install synapse, see `<INSTALL.md>`_.
-* For specific details on how to configure Synapse for federation see `docs/federate.md <docs/federate.md>`_
+System requirements:
+
+- POSIX-compliant system (tested on Linux & OS X)
+- Python 3.5, 3.6, 3.7, or 2.7
+- At least 1GB of free RAM if you want to join large public rooms like #matrix:matrix.org
+
+The currently supported environment is [Ubuntu 18.04
+LTS](http://releases.ubuntu.com/18.04/).
+
+Recommended installation procedure
+----------------------------------
+
+Building and running Synapse from source in a python3 environment is the
+recommended path for installation, as it is the most well-tested route.
+Binary packages are available for various platforms, but not officially
+supported by the Synapse team. See `Platform Specific Instructions`_ for
+details.
+
+Install prerequisites
+*********************
+
+Installing prerequisites on Ubuntu or Debian::
+
+    sudo apt-get update && sudo apt-get dist-upgrade
+    sudo apt-get install build-essential python3-dev python3-venv \
+                         python3-pip python-setuptools libssl-dev \
+                         libjpeg-dev libffi-dev zlib1g-dev \
+                         libxslt1-dev postgresql libwebp-dev libpq-dev
+
+**TODO: Update and check non-debian distro pre-req's for new process**
+
+Installing prerequisites on ArchLinux::
+
+    sudo pacman -S base-devel python python-pip \
+                   python-setuptools python-virtualenv
+
+Installing prerequisites on CentOS 7 or Fedora::
+
+    sudo yum install libtiff-devel libjpeg-devel libzip-devel freetype-devel \
+                     lcms2-devel libwebp-devel tcl-devel tk-devel redhat-rpm-config \
+                     python-virtualenv libffi-devel openssl-devel
+    sudo yum groupinstall "Development Tools"
+
+Installing prerequisites on Raspbian::
+
+    sudo apt-get update && sudo apt-get dist-upgrade
+    sudo apt-get install build-essential python3-dev python3-venv \
+                         python3-pip python-setuptools libssl-dev \
+                         libjpeg-dev libffi-dev zlib1g-dev \
+                         libxslt1-dev postgresql libwebp-dev libpq-dev
+
+
+Set up python environment
+*************************
+
+Add a new user for Synapse and log in as them::
+
+    useradd matrix
+    su -l matrix
+
+Create a python3 virtualenv and install dependencies::
+
+    python3 -m venv matrix-synapse
+    ./matrix-synapse/bin/python -m pip install -U pip setuptools wheel
+    ./matrix-synapse/bin/python -m pip install -U matrix-synapse[all]
+
+Create a Synapse configuration directory. **Make sure you change
+``matrix.mydomain.com`` to your own domain**::
+
+    mkdir cfg
+    ./matrix-synapse/bin/python -m synapse.app.homeserver --generate-config \
+                                -H matrix.mydomain.com \ # Change
+                                -c cfg/homeserver.yaml \
+                                --report-stats=yes
+
+Installing postgres
+*******************
+
+`PostgreSQL <https://www.postgresql.org/>`_ is the recommended database backend
+supported by Synapse. If you are upgrading from SQLite, please consult the
+`documentation on how to switch
+<https://github.com/matrix-org/synapse/blob/master/docs/postgres.rst#porting-from-sqlite>`_
+for improved performance.
+
+Enable and start postgresql::
+
+    systemctl enable postgresql && systemctl start postgresql
+
+Assuming your postgres user is called ``postgres``, login and create a user.
+This will prompt for a password, make sure you set a strong passphrase::
+
+    su - postgres
+    createuser --pwprompt synapse_user
+
+Create a Synapse database::
+
+    CREATE DATABASE synapse
+     ENCODING 'UTF8'
+     LC_COLLATE='C'
+     LC_CTYPE='C'
+     template=template0
+     OWNER synapse_user;
+
+Finally, edit the ``database`` section in your ``cfg/homeserver.yaml`` file
+to point to the new database::
+
+    database:
+        name: psycopg2
+        args:
+            user: synapse_user
+            password: <password defined in the createuser step>
+            database: synapse
+            host: localhost
+            cp_min: 5
+            cp_max: 10
+
+More information can be found at `Using Postgres with Synapse
+<docs/postgres.rst>`_.
+
+Systemd
+*******
+
+Running Synapse under `systemd <https://en.wikipedia.org/wiki/Systemd>`_ is
+recommended, as it allows for simple management and automatic restarts in case
+of a server error. To integrate Synapse with systemd, create a file at
+`/etc/systemd/system/synapse.service` with the following contents::
+
+    [Unit]
+    Description="Synapse homeserver"
+
+    [Service]
+    ExecStart=/home/matrix/matrix-synapse/bin/python -m synapse.app.homeserver
+    PIDFile=/home/matrix/matrix-synapse/homeserver.pid
+    Type=forking
+    WorkingDirectory=/home/matrix/matrix-synapse/
+    Restart=always
+
+Then tell systemd to update service file information::
+
+    sudo systemctl daemon-reload
+
+Synapse should now be enabled to run under Systemd, but **don't start Synapse
+yet!**
+
+
+ACME setup
+**********
+
+Synapse requires valid TLS certificates for communication between servers
+(port ``8448`` by default) in addition to those that are client-facing (port
+``443``). Synapse **will provision server-to-server certificates
+automatically for you for free** through `Let's Encrypt
+<https://letsencrypt.org/>`_ if you tell it to.
+
+    Note: Synapse does not currently hot-renew Let's Encrypt certificates for
+    you, it only checks for certificates that need renewing on restart. This
+    functionality will be implemented promptly, but if in the meantime your
+    federation certificates expire, simply restarting Synapse should renew
+    them automatically.
+
+In order for Synapse to complete the ACME challenge to provision a
+certificate, it needs access to port 80. Typically listening on port 80 is
+only granted to applications running as root. There are thus two solutions to
+this problem.
+
+**Using a reverse proxy**
+
+A reverse proxy such as Apache or Nginx allows a single process (the web
+server) to listen on port 80 and redirect traffic to the appropriate program
+running on your server.
+
+
+
+**Authbind**
+
+``authbind`` allows a program which does not or should not run as root to
+bind to low-numbered ports in a controlled way. The setup is simpler, but
+requires a webserver not to already be running on port 80. **This includes
+every time Synapse renews a certificate**, which may be cumbersome if you
+usually run a web server on port 80. Nevertheless, if that isn't a concern,
+follow the instructions below.
+
+Install ``authbind``. This can be done on Ubuntu/Debian with::
+
+    sudo apt-get install authbind
+
+**Add authbind to the systemd script**
+
+
+**TODO: This right?** If you would like to use your own
+certificates, specifying them in Synapse's config file is sufficient.
+
+
+**TODO: Fit this in**
+These keys will allow your Home Server to identify itself to other Home
+Servers, so don't lose or delete them. It would be wise to back them up
+somewhere safe. (If, for whatever reason, you do need to change your Home
+Server's keys, you may find that other Home Servers have the old key cached.
+If you update the signing key, you should change the name of the key in the
+``<server name>.signing.key`` file (the second word) to something different.
+See `the spec`__ for more information on key management.)
+
+**TODO: Does this still work?** This Synapse installation can then be later
+upgraded by using pip again with the update flag::
+
+    source ~/synapse/env/bin/activate
+    pip install -U matrix-synapse[all]
+
+In case of problems, please see the _`Troubleshooting` section below.
+
+We have now created a "matrix" user with its own home directory that stores
+Synapse's data and configuration files, backed by a postgres database, all
+packaged into a isolated python virtual environment.
+
+Configuring Synapse
+-------------------
+
+Before starting Synapse, inspect the ``cfg/homeserver.yaml`` file. ``server_name``
+determines the "domain" part of user-ids for users on your server, which will
+all be of the format ``@user:my.domain.name``. It also determines how other
+matrix servers will reach yours for `Federation`_. For a test configuration,
+set this to the hostname of your server. For a more production-ready setup, you
+will probably want to specify your domain (``example.com``) rather than a
+matrix-specific hostname here (in the same way that your email address is
+probably ``user@example.com`` rather than ``user@email.example.com``) - but
+doing so may require more advanced setup - see `Setting up
+Federation`_. **Be aware that the server name cannot be changed later.**
+
+.. __: `key_management`_
+
+The default configuration exposes two HTTP ports: 8008 and 8448. Port 8008 is
+configured without TLS; it should be behind a reverse proxy for TLS/SSL
+termination on port 443 which in turn should be used for clients. Port 8448
+is configured to use TLS with a self-signed certificate. If you would like
+to do an initial test with a client without having to setup a reverse proxy,
+you can temporarly use another certificate. You can do so by changing
+``tls_certificate_path`` and ``tls_private_key_path``
+in ``homeserver.yaml``; alternatively, you can use a reverse-proxy, but be sure
+to read `Using a reverse proxy with Synapse`_ when doing so.
+
+Apart from port 8448 using TLS, both ports are the same in the default
+configuration.
+
+Registering a user
+------------------
+
+You will need at least one user on your server in order to use a Matrix
+client. Users can be registered either `via a Matrix client`__, or via a
+commandline script.
+
+.. __: `client-user-reg`_
+
+To get started, it is easiest to use the command line to register new users::
+
+    $ source ~/synapse/env/bin/activate
+    $ synctl start # if not already running
+    $ register_new_matrix_user -c homeserver.yaml https://localhost:8448
+    New user localpart: erikj
+    Password:
+    Confirm password:
+    Make admin [no]:
+    Success!
+
+This process uses a setting ``registration_shared_secret`` in
+``homeserver.yaml``, which is shared between Synapse itself and the
+``register_new_matrix_user`` script. It doesn't matter what it is (a random
+value is generated by ``--generate-config``), but it should be kept secret, as
+anyone with knowledge of it can register users on your server even if
+``enable_registration`` is ``false``.
+
+Setting up a TURN server
+------------------------
+
+For reliable VoIP calls to be routed via this homeserver, you MUST configure
+a TURN server.  See `<docs/turn-howto.rst>`_ for details.
+
+Running Synapse
+===============
+
+**TODO: Needs update**
+
+To actually run your new homeserver, pick a working directory for Synapse to
+run (e.g. ``~/synapse``), and::
+
+    cd ~/synapse
+    source env/bin/activate
+    synctl start
+
+Upgrading an existing Synapse
+=============================
+
+The instructions for upgrading synapse are in `UPGRADE.rst`_.
+Please check these instructions as upgrading may require extra steps for some
+versions of synapse.
+
+.. _UPGRADE.rst: UPGRADE.rst
 
 
 Connecting to Synapse from a client
 ===================================
 
 The easiest way to try out your new Synapse installation is by connecting to it
-from a web client.
+from a web client. The easiest option is probably the one at
+https://riot.im/app. You will need to specify a "Custom server" when you log on
+or register: set this to ``https://domain.tld`` if you setup a reverse proxy
+following the recommended setup, or ``https://localhost:8448`` - remember to specify the
+port (``:8448``) if not ``:443`` unless you changed the configuration. (Leave the identity
+server as the default - see `Identity servers`_.)
 
-Unless you are running a test instance of Synapse on your local machine, in
-general, you will need to enable TLS support before you can successfully
-connect from a client: see `<INSTALL.md#tls-certificates>`_.
-
-An easy way to get started is to login or register via Riot at
-https://riot.im/app/#/login or https://riot.im/app/#/register respectively.
-You will need to change the server you are logging into from ``matrix.org``
-and instead specify a Homeserver URL of ``https://<server_name>:8448``
-(or just ``https://<server_name>`` if you are using a reverse proxy).
-(Leave the identity server as the default - see `Identity servers`_.)
-If you prefer to use another client, refer to our
-`client breakdown <https://matrix.org/docs/projects/clients-matrix>`_.
+If using port 8448 you will run into errors until you accept the self-signed
+certificate. You can easily do this by going to ``https://localhost:8448``
+directly with your browser and accept the presented certificate. You can then
+go back in your web client and proceed further.
 
 If all goes well you should at least be able to log in, create a room, and
 start sending messages.
@@ -115,14 +407,14 @@ Registering a new user from a client
 
 By default, registration of new users via Matrix clients is disabled. To enable
 it, specify ``enable_registration: true`` in ``homeserver.yaml``. (It is then
-recommended to also set up CAPTCHA - see `<docs/CAPTCHA_SETUP.md>`_.)
+recommended to also set up CAPTCHA - see `<docs/CAPTCHA_SETUP.rst>`_.)
 
 Once ``enable_registration`` is set to ``true``, it is possible to register a
 user via `riot.im <https://riot.im/app/#/register>`_ or other Matrix clients.
 
-Your new user name will be formed partly from the ``server_name``, and partly
-from a localpart you specify when you create the account. Your name will take
-the form of::
+Your new user name will be formed partly from the ``server_name`` (see
+`Configuring synapse`_), and partly from a localpart you specify when you
+create the account. Your name will take the form of::
 
     @localpart:my.domain.name
 
@@ -131,12 +423,6 @@ the form of::
 As when logging in, you will need to specify a "Custom server".  Specify your
 desired ``localpart`` in the 'User name' box.
 
-ACME setup
-==========
-
-For details on having Synapse manage your federation TLS certificates
-automatically, please see `<docs/ACME.md>`_.
-
 
 Security Note
 =============
@@ -155,28 +441,291 @@ See https://github.com/vector-im/riot-web/issues/1977 and
 https://developer.github.com/changes/2014-04-25-user-content-security for more details.
 
 
-Upgrading an existing Synapse
-=============================
+Platform-Specific Packages
+==========================
 
-The instructions for upgrading synapse are in `UPGRADE.rst`_.
-Please check these instructions as upgrading may require extra steps for some
-versions of synapse.
+Note that the only officially supported installation method is what is listed
+in `Synapse installation`_. Instructions and packages for other platforms are
+listed below, but beware that they may be outdated.
 
-.. _UPGRADE.rst: UPGRADE.rst
+Debian
+------
+
+Matrix provides official Debian packages via apt from https://matrix.org/packages/debian/.
+
+Note that these packages do not include a client - choose one from
+https://matrix.org/docs/projects/try-matrix-now.html (or build your own with one of our SDKs :).
+
+Fedora
+------
+
+Synapse is in the Fedora repositories as ``matrix-synapse``::
+
+    sudo dnf install matrix-synapse
+
+Oleg Girko provides Fedora RPMs at
+https://obs.infoserver.lv/project/monitor/matrix-synapse
+
+OpenSUSE
+--------
+
+Synapse is in the OpenSUSE repositories as ``matrix-synapse``::
+
+    sudo zypper install matrix-synapse
+
+SUSE Linux Enterprise Server
+----------------------------
+
+Unofficial package are built for SLES 15 in the openSUSE:Backports:SLE-15 repository at
+https://download.opensuse.org/repositories/openSUSE:/Backports:/SLE-15/standard/
+
+ArchLinux
+---------
+
+The quickest way to get up and running with ArchLinux is probably with the community package
+https://www.archlinux.org/packages/community/any/matrix-synapse/, which should pull in most of
+the necessary dependencies.
+
+pip may be outdated (6.0.7-1 and needs to be upgraded to 6.0.8-1 )::
+
+    sudo pip install --upgrade pip
+
+If you encounter an error with lib bcrypt causing an Wrong ELF Class:
+ELFCLASS32 (x64 Systems), you may need to reinstall py-bcrypt to correctly
+compile it under the right architecture. (This should not be needed if
+installing under virtualenv)::
+
+    sudo pip uninstall py-bcrypt
+    sudo pip install py-bcrypt
+
+FreeBSD
+-------
+
+Synapse can be installed via FreeBSD Ports or Packages contributed by Brendan Molloy from:
+
+ - Ports: ``cd /usr/ports/net-im/py-matrix-synapse && make install clean``
+ - Packages: ``pkg install py27-matrix-synapse``
+
+OpenBSD
+-------
+
+There is currently no port for OpenBSD. Additionally, OpenBSD's security
+settings require a slightly more difficult installation process.
+
+1) Create a new directory in ``/usr/local`` called ``_synapse``. Also, create a
+   new user called ``_synapse`` and set that directory as the new user's home.
+   This is required because, by default, OpenBSD only allows binaries which need
+   write and execute permissions on the same memory space to be run from
+   ``/usr/local``.
+2) ``su`` to the new ``_synapse`` user and change to their home directory.
+3) Create a new virtualenv: ``virtualenv -p python2.7 ~/.synapse``
+4) Source the virtualenv configuration located at
+   ``/usr/local/_synapse/.synapse/bin/activate``. This is done in ``ksh`` by
+   using the ``.`` command, rather than ``bash``'s ``source``.
+5) Optionally, use ``pip`` to install ``lxml``, which Synapse needs to parse
+   webpages for their titles.
+6) Use ``pip`` to install this repository: ``pip install matrix-synapse``
+7) Optionally, change ``_synapse``'s shell to ``/bin/false`` to reduce the
+   chance of a compromised Synapse server being used to take over your box.
+
+After this, you may proceed with the rest of the install directions.
+
+NixOS
+-----
+
+Robin Lambertz has packaged Synapse for NixOS at:
+https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/matrix-synapse.nix
+
+Windows Install
+---------------
+
+Running Synapse on Windows is not recommended or supported. However, if you
+wish to run Synapse on Windows, the Windows Subsystem For Linux provides a
+Linux environment on Windows 10 which is capable of using the Debian, Fedora,
+or source installation methods. More information about WSL can be found at
+https://docs.microsoft.com/en-us/windows/wsl/install-win10 for Windows 10 and
+https://docs.microsoft.com/en-us/windows/wsl/install-on-server for Windows
+Server.
+
+
+Alternative installation methods
+================================
+
+There is an offical synapse image available at
+https://hub.docker.com/r/matrixdotorg/synapse/tags/ which can be used with
+the docker-compose file available at `contrib/docker <contrib/docker>`_.
+Further information on this including configuration options is available in
+the README on hub.docker.com.
+
+Alternatively, Andreas Peters (previously Silvio Fricke) has contributed a
+Dockerfile to automate a synapse server in a single Docker image, at
+https://hub.docker.com/r/avhost/docker-matrix/tags/
+
+Slavi Pantaleev has created an Ansible playbook, which installs the offical
+Docker image of Matrix Synapse along with many other Matrix-related services
+(Postgres database, riot-web, coturn, mxisd, SSL support, etc.). For more
+details, see https://github.com/spantaleev/matrix-docker-ansible-deploy
+
+
+Troubleshooting
+===============
+
+Troubleshooting Installation
+----------------------------
+
+Synapse requires pip 8 or later, so if your OS provides too old a version you
+may need to manually upgrade it::
+
+    sudo pip install --upgrade pip
+
+Installing may fail with ``Could not find any downloads that satisfy the requirement pymacaroons-pynacl (from matrix-synapse==0.12.0)``.
+You can fix this by manually upgrading pip and virtualenv::
+
+    sudo pip install --upgrade virtualenv
+
+You can next rerun ``virtualenv -p python3 synapse`` to update the virtual env.
+
+Installing may fail during installing virtualenv with ``InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning.``
+You can fix this  by manually installing ndg-httpsclient::
+
+    pip install --upgrade ndg-httpsclient
+
+Installing may fail with ``mock requires setuptools>=17.1. Aborting installation``.
+You can fix this by upgrading setuptools::
+
+    pip install --upgrade setuptools
+
+If pip crashes mid-installation for reason (e.g. lost terminal), pip may
+refuse to run until you remove the temporary installation directory it
+created. To reset the installation::
+
+    rm -rf /tmp/pip_install_matrix
+
+pip seems to leak *lots* of memory during installation.  For instance, a Linux
+host with 512MB of RAM may run out of memory whilst installing Twisted.  If this
+happens, you will have to individually install the dependencies which are
+failing, e.g.::
+
+    pip install twisted
+
+Running out of File Handles
+***************************
+
+If synapse runs out of filehandles, it typically fails badly - live-locking
+at 100% CPU, and/or failing to accept new TCP connections (blocking the
+connecting client).  Matrix currently can legitimately use a lot of file handles,
+thanks to busy rooms like #matrix:matrix.org containing hundreds of participating
+servers.  The first time a server talks in a room it will try to connect
+simultaneously to all participating servers, which could exhaust the available
+file descriptors between DNS queries & HTTPS sockets, especially if DNS is slow
+to respond.  (We need to improve the routing algorithm used to be better than
+full mesh, but as of June 2017 this hasn't happened yet).
+
+If you hit this failure mode, we recommend increasing the maximum number of
+open file handles to be at least 4096 (assuming a default of 1024 or 256).
+This is typically done by editing ``/etc/security/limits.conf``
+
+Separately, Synapse may leak file handles if inbound HTTP requests get stuck
+during processing - e.g. blocked behind a lock or talking to a remote server etc.
+This is best diagnosed by matching up the 'Received request' and 'Processed request'
+log lines and looking for any 'Processed request' lines which take more than
+a few seconds to execute.  Please let us know at #matrix-dev:matrix.org if
+you see this failure mode so we can help debug it, however.
+
+.. _federation:
+
+Setting up Federation
+=====================
+
+Federation is the process by which users on different servers can participate
+in the same room. For this to work, those other servers must be able to contact
+yours to send messages.
+
+As explained in `Configuring synapse`_, the ``server_name`` in your
+``homeserver.yaml`` file determines the way that other servers will reach
+yours. By default, they will treat it as a hostname and try to connect to
+port 8448. This is easy to set up and will work with the default configuration,
+provided you set the ``server_name`` to match your machine's public DNS
+hostname.
+
+For a more flexible configuration, you can set up a DNS SRV record. This allows
+you to run your server on a machine that might not have the same name as your
+domain name. For example, you might want to run your server at
+``synapse.example.com``, but have your Matrix user-ids look like
+``@user:example.com``. (A SRV record also allows you to change the port from
+the default 8448. However, if you are thinking of using a reverse-proxy on the
+federation port, which is not recommended, be sure to read
+`Reverse-proxying the federation port`_ first.)
+
+To use a SRV record, first create your SRV record and publish it in DNS. This
+should have the format ``_matrix._tcp.<yourdomain.com> <ttl> IN SRV 10 0 <port>
+<synapse.server.name>``. The DNS record should then look something like::
+
+    $ dig -t srv _matrix._tcp.example.com
+    _matrix._tcp.example.com. 3600    IN      SRV     10 0 8448 synapse.example.com.
+
+Note that the server hostname cannot be an alias (CNAME record): it has to point
+directly to the server hosting the synapse instance.
+
+You can then configure your homeserver to use ``<yourdomain.com>`` as the domain in
+its user-ids, by setting ``server_name``::
+
+    python -m synapse.app.homeserver \
+        --server-name <yourdomain.com> \
+        --config-path homeserver.yaml \
+        --generate-config
+    python -m synapse.app.homeserver --config-path homeserver.yaml
+
+If you've already generated the config file, you need to edit the ``server_name``
+in your ``homeserver.yaml`` file. If you've already started Synapse and a
+database has been created, you will have to recreate the database.
+
+If all goes well, you should be able to `connect to your server with a client`__,
+and then join a room via federation. (Try ``#matrix-dev:matrix.org`` as a first
+step. "Matrix HQ"'s sheer size and activity level tends to make even the
+largest boxes pause for thought.)
+
+.. __: `Connecting to Synapse from a client`_
+
+Troubleshooting
+---------------
+
+You can use the federation tester to check if your homeserver is all set:
+``https://matrix.org/federationtester/api/report?server_name=<your_server_name>``
+If any of the attributes under "checks" is false, federation won't work.
+
+The typical failure mode with federation is that when you try to join a room,
+it is rejected with "401: Unauthorized". Generally this means that other
+servers in the room couldn't access yours. (Joining a room over federation is a
+complicated dance which requires connections in both directions).
+
+So, things to check are:
+
+* If you are trying to use a reverse-proxy, read `Reverse-proxying the
+  federation port`_.
+* If you are not using a SRV record, check that your ``server_name`` (the part
+  of your user-id after the ``:``) matches your hostname, and that port 8448 on
+  that hostname is reachable from outside your network.
+* If you *are* using a SRV record, check that it matches your ``server_name``
+  (it should be ``_matrix._tcp.<server_name>``), and that the port and hostname
+  it specifies are reachable from outside your network.
+
+Running a Demo Federation of Synapses
+-------------------------------------
+
+If you want to get up and running quickly with a trio of homeservers in a
+private federation, there is a script in the ``demo`` directory. This is mainly
+useful just for development purposes. See `<demo/README>`_.
 
 
 Using PostgreSQL
 ================
 
-Synapse offers two database engines:
- * `SQLite <https://sqlite.org/>`_
- * `PostgreSQL <https://www.postgresql.org>`_
+As of Synapse 0.9, `PostgreSQL <https://www.postgresql.org>`_ is supported as an
+alternative to the `SQLite <https://sqlite.org/>`_ database that Synapse has
+traditionally used for convenience and simplicity.
 
-By default Synapse uses SQLite in and doing so trades performance for convenience.
-SQLite is only recommended in Synapse for testing purposes or for servers with
-light workloads.
-
-Almost all installations should opt to use PostreSQL. Advantages include:
+The advantages of Postgres include:
 
 * significant performance improvements due to the superior threading and
   caching model, smarter query optimiser
@@ -186,7 +735,8 @@ Almost all installations should opt to use PostreSQL. Advantages include:
   synapse itself.
 
 For information on how to install and use PostgreSQL, please see
-`docs/postgres.md <docs/postgres.md>`_.
+`docs/postgres.rst <docs/postgres.rst>`_.
+
 
 .. _reverse-proxy:
 
@@ -201,7 +751,118 @@ It is recommended to put a reverse proxy such as
 doing so is that it means that you can expose the default https port (443) to
 Matrix clients without needing to run Synapse with root privileges.
 
-For information on configuring one, see `<docs/reverse_proxy.md>`_.
+The most important thing to know here is that Matrix clients and other Matrix
+servers do not necessarily need to connect to your server via the same
+port. Indeed, clients will use port 443 by default, whereas servers default to
+port 8448. Where these are different, we refer to the 'client port' and the
+'federation port'.
+
+The next most important thing to know is that using a reverse-proxy on the
+federation port has a number of pitfalls. It is possible, but be sure to read
+`Reverse-proxying the federation port`_.
+
+The recommended setup is therefore to configure your reverse-proxy on port 443
+to port 8008 of synapse for client connections, but to also directly expose port
+8448 for server-server connections. All the Matrix endpoints begin ``/_matrix``,
+so an example nginx configuration might look like::
+
+  server {
+      listen 443 ssl;
+      listen [::]:443 ssl;
+      server_name matrix.example.com;
+
+      location /_matrix {
+          proxy_pass http://localhost:8008;
+          proxy_set_header X-Forwarded-For $remote_addr;
+      }
+  }
+
+an example Caddy configuration might look like::
+
+    matrix.example.com {
+      proxy /_matrix http://localhost:8008 {
+        transparent
+      }
+    }
+
+and an example Apache configuration might look like::
+
+    <VirtualHost *:443>
+        SSLEngine on
+        ServerName matrix.example.com;
+
+        <Location /_matrix>
+            ProxyPass http://127.0.0.1:8008/_matrix nocanon
+            ProxyPassReverse http://127.0.0.1:8008/_matrix
+        </Location>
+    </VirtualHost>
+
+You will also want to set ``bind_addresses: ['127.0.0.1']`` and ``x_forwarded: true``
+for port 8008 in ``homeserver.yaml`` to ensure that client IP addresses are
+recorded correctly.
+
+Having done so, you can then use ``https://matrix.example.com`` (instead of
+``https://matrix.example.com:8448``) as the "Custom server" when `Connecting to
+Synapse from a client`_.
+
+Reverse-proxying the federation port
+------------------------------------
+
+There are two issues to consider before using a reverse-proxy on the federation
+port:
+
+* Due to the way SSL certificates are managed in the Matrix federation protocol
+  (see `spec`__), Synapse needs to be configured with the path to the SSL
+  certificate, *even if you do not terminate SSL at Synapse*.
+
+  .. __: `key_management`_
+
+* Until v0.33.3, Synapse did not support SNI on the federation port
+  (`bug #1491 <https://github.com/matrix-org/synapse/issues/1491>`_). This bug
+  is now fixed, but means that federating with older servers can be unreliable
+  when using name-based virtual hosting.
+
+Furthermore, a number of the normal reasons for using a reverse-proxy do not
+apply:
+
+* Other servers will connect on port 8448 by default, so there is no need to
+  listen on port 443 (for federation, at least), which avoids the need for root
+  privileges and virtual hosting.
+
+* A self-signed SSL certificate is fine for federation, so there is no need to
+  automate renewals. (The certificate generated by ``--generate-config`` is
+  valid for 10 years.)
+
+If you want to set up a reverse-proxy on the federation port despite these
+caveats, you will need to do the following:
+
+* In ``homeserver.yaml``, set ``tls_certificate_path`` to the path to the SSL
+  certificate file used by your reverse-proxy, and set ``no_tls`` to ``True``.
+  (``tls_private_key_path`` will be ignored if ``no_tls`` is ``True``.)
+
+* In your reverse-proxy configuration:
+
+  * If there are other virtual hosts on the same port, make sure that the
+    *default* one uses the certificate configured above.
+
+  * Forward ``/_matrix`` to Synapse.
+
+* If your reverse-proxy is not listening on port 8448, publish a SRV record to
+  tell other servers how to find you. See `Setting up Federation`_.
+
+When updating the SSL certificate, just update the file pointed to by
+``tls_certificate_path`` and then restart Synapse. (You may like to use a symbolic link
+to help make this process atomic.)
+
+The most common mistake when setting up federation is not to tell Synapse about
+your SSL certificate. To check it, you can visit
+``https://matrix.org/federationtester/api/report?server_name=<your_server_name>``.
+Unfortunately, there is no UI for this yet, but, you should see
+``"MatchingTLSFingerprint": true``. If not, check that
+``Certificates[0].SHA256Fingerprint`` (the fingerprint of the certificate
+presented by your reverse-proxy) matches ``Keys.tls_fingerprints[0].sha256``
+(the fingerprint of the certificate Synapse is using).
+
 
 Identity Servers
 ================
@@ -233,6 +894,24 @@ an email address with your account, or send an invite to another user via their
 email address.
 
 
+URL Previews
+============
+
+Synapse 0.15.0 introduces a new API for previewing URLs at
+``/_matrix/media/r0/preview_url``.  This is disabled by default.  To turn it on
+you must enable the ``url_preview_enabled: True`` config parameter and
+explicitly specify the IP ranges that Synapse is not allowed to spider for
+previewing in the ``url_preview_ip_range_blacklist`` configuration parameter.
+This is critical from a security perspective to stop arbitrary Matrix users
+spidering 'internal' URLs on your network.  At the very least we recommend that
+your loopback and RFC1918 IP addresses are blacklisted.
+
+This also requires the optional lxml and netaddr python dependencies to be
+installed.  This in turn requires the libxml2 library to be available - on
+Debian/Ubuntu this means ``apt-get install libxml2-dev``, or equivalent for
+your OS.
+
+
 Password reset
 ==============
 
@@ -259,7 +938,7 @@ Synapse Development
 
 Before setting up a development environment for synapse, make sure you have the
 system dependencies (such as the python header files) installed - see
-`Installing from source <INSTALL.md#installing-from-source>`_.
+`Installing from source`_.
 
 To check out a synapse for development, clone the git repo into a working
 directory of your choice::
@@ -270,9 +949,9 @@ directory of your choice::
 Synapse has a number of external dependencies, that are easiest
 to install using pip and a virtualenv::
 
-    virtualenv -p python3 env
+    virtualenv -p python2.7 env
     source env/bin/activate
-    python -m pip install --no-use-pep517 -e .[all]
+    python -m pip install -e .[all]
 
 This will run a process of downloading and installing all the needed
 dependencies into a virtual env.
@@ -313,84 +992,26 @@ Building internal API documentation::
 
     python setup.py build_sphinx
 
-Troubleshooting
-===============
 
-Running out of File Handles
----------------------------
-
-If synapse runs out of file handles, it typically fails badly - live-locking
-at 100% CPU, and/or failing to accept new TCP connections (blocking the
-connecting client).  Matrix currently can legitimately use a lot of file handles,
-thanks to busy rooms like #matrix:matrix.org containing hundreds of participating
-servers.  The first time a server talks in a room it will try to connect
-simultaneously to all participating servers, which could exhaust the available
-file descriptors between DNS queries & HTTPS sockets, especially if DNS is slow
-to respond. (We need to improve the routing algorithm used to be better than
-full mesh, but as of March 2019 this hasn't happened yet).
-
-If you hit this failure mode, we recommend increasing the maximum number of
-open file handles to be at least 4096 (assuming a default of 1024 or 256).
-This is typically done by editing ``/etc/security/limits.conf``
-
-Separately, Synapse may leak file handles if inbound HTTP requests get stuck
-during processing - e.g. blocked behind a lock or talking to a remote server etc.
-This is best diagnosed by matching up the 'Received request' and 'Processed request'
-log lines and looking for any 'Processed request' lines which take more than
-a few seconds to execute. Please let us know at #synapse:matrix.org if
-you see this failure mode so we can help debug it, however.
-
-Help!! Synapse is slow and eats all my RAM/CPU!
------------------------------------------------
-
-First, ensure you are running the latest version of Synapse, using Python 3
-with a PostgreSQL database.
+Help!! Synapse eats all my RAM!
+===============================
 
 Synapse's architecture is quite RAM hungry currently - we deliberately
 cache a lot of recent room data and metadata in RAM in order to speed up
-common requests. We'll improve this in the future, but for now the easiest
+common requests.  We'll improve this in future, but for now the easiest
 way to either reduce the RAM usage (at the risk of slowing things down)
 is to set the almost-undocumented ``SYNAPSE_CACHE_FACTOR`` environment
-variable. The default is 0.5, which can be decreased to reduce RAM usage
+variable.  The default is 0.5, which can be decreased to reduce RAM usage
 in memory constrained enviroments, or increased if performance starts to
 degrade.
 
-However, degraded performance due to a low cache factor, common on
-machines with slow disks, often leads to explosions in memory use due
-backlogged requests. In this case, reducing the cache factor will make
-things worse. Instead, try increasing it drastically. 2.0 is a good
-starting value.
-
 Using `libjemalloc <http://jemalloc.net/>`_ can also yield a significant
-improvement in overall memory use, and especially in terms of giving back
-RAM to the OS. To use it, the library must simply be put in the
-LD_PRELOAD environment variable when launching Synapse. On Debian, this
-can be done by installing the ``libjemalloc1`` package and adding this
-line to ``/etc/default/matrix-synapse``::
+improvement in overall amount, and especially in terms of giving back RAM
+to the OS. To use it, the library must simply be put in the LD_PRELOAD
+environment variable when launching Synapse. On Debian, this can be done
+by installing the ``libjemalloc1`` package and adding this line to
+``/etc/default/matrix-synapse``::
 
     LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libjemalloc.so.1
 
-This can make a significant difference on Python 2.7 - it's unclear how
-much of an improvement it provides on Python 3.x.
-
-If you're encountering high CPU use by the Synapse process itself, you
-may be affected by a bug with presence tracking that leads to a
-massive excess of outgoing federation requests (see `discussion
-<https://github.com/matrix-org/synapse/issues/3971>`_). If metrics
-indicate that your server is also issuing far more outgoing federation
-requests than can be accounted for by your users' activity, this is a
-likely cause. The misbehavior can be worked around by setting
-``use_presence: false`` in the Synapse config file.
-
-People can't accept room invitations from me
---------------------------------------------
-
-The typical failure mode here is that you send an invitation to someone 
-to join a room or direct chat, but when they go to accept it, they get an
-error (typically along the lines of "Invalid signature"). They might see
-something like the following in their logs::
-
-    2019-09-11 19:32:04,271 - synapse.federation.transport.server - 288 - WARNING - GET-11752 - authenticate_request failed: 401: Invalid signature for server <server> with key ed25519:a_EqML: Unable to verify signature for <server>
-
-This is normally caused by a misconfiguration in your reverse-proxy. See
-`<docs/reverse_proxy.rst>`_ and double-check that your settings are correct.
+.. _`key_management`: https://matrix.org/docs/spec/server_server/unstable.html#retrieving-server-keys

UPGRADE.rst

@@ -2,378 +2,83 @@ Upgrading Synapse
 =================
 
 Before upgrading check if any special steps are required to upgrade from the
-version you currently have installed to the current version of Synapse. The extra
+what you currently have installed to current version of synapse. The extra
 instructions that may be required are listed later in this document.
 
-* If Synapse was installed using `prebuilt packages
-  <INSTALL.md#prebuilt-packages>`_, you will need to follow the normal process
-  for upgrading those packages.
+1. If synapse was installed in a virtualenv then active that virtualenv before
+   upgrading. If synapse is installed in a virtualenv in ``~/.synapse/`` then
+   run:
 
-* If Synapse was installed from source, then:
+   .. code:: bash
 
-  1. Activate the virtualenv before upgrading. For example, if Synapse is
-     installed in a virtualenv in ``~/synapse/env`` then run:
+       source ~/.synapse/bin/activate
 
-     .. code:: bash
+2. If synapse was installed using pip then upgrade to the latest version by
+   running:
 
-       source ~/synapse/env/bin/activate
-
-  2. If Synapse was installed using pip then upgrade to the latest version by
-     running:
-
-     .. code:: bash
+   .. code:: bash
 
        pip install --upgrade matrix-synapse
 
-     If Synapse was installed using git then upgrade to the latest version by
-     running:
+       # restart synapse
+       synctl restart
 
-     .. code:: bash
 
+   If synapse was installed using git then upgrade to the latest version by
+   running:
+
+   .. code:: bash
+
+       # Pull the latest version of the master branch.
        git pull
-       pip install --upgrade .
-
-  3. Restart Synapse:
-
-     .. code:: bash
+       # Update the versions of synapse's python dependencies.
+       python synapse/python_dependencies.py | xargs pip install --upgrade
 
+       # restart synapse
        ./synctl restart
 
-To check whether your update was successful, you can check the running server
-version with:
+
+To check whether your update was sucessful, you can check the Server header
+returned by the Client-Server API:
 
 .. code:: bash
 
-    # you may need to replace 'localhost:8008' if synapse is not configured
-    # to listen on port 8008.
-
-    curl http://localhost:8008/_synapse/admin/v1/server_version
-
-Rolling back to older versions
-------------------------------
-
-Rolling back to previous releases can be difficult, due to database schema
-changes between releases. Where we have been able to test the rollback process,
-this will be noted below.
-
-In general, you will need to undo any changes made during the upgrade process,
-for example:
-
-* pip:
-
-  .. code:: bash
-
-     source env/bin/activate
-     # replace `1.3.0` accordingly:
-     pip install matrix-synapse==1.3.0
-
-* Debian:
-
-  .. code:: bash
-
-     # replace `1.3.0` and `stretch` accordingly:
-     wget https://packages.matrix.org/debian/pool/main/m/matrix-synapse-py3/matrix-synapse-py3_1.3.0+stretch1_amd64.deb
-     dpkg -i matrix-synapse-py3_1.3.0+stretch1_amd64.deb
-
-
-Upgrading to v1.5.0
-===================
-
-This release includes a database migration which may take several minutes to
-complete if there are a large number (more than a million or so) of entries in
-the ``devices`` table. This is only likely to a be a problem on very large
-installations.
-
-
-Upgrading to v1.4.0
-===================
-
-New custom templates
---------------------
-
-If you have configured a custom template directory with the
-``email.template_dir`` option, be aware that there are new templates regarding
-registration and threepid management (see below) that must be included.
-
-* ``registration.html`` and ``registration.txt``
-* ``registration_success.html`` and ``registration_failure.html``
-* ``add_threepid.html`` and  ``add_threepid.txt``
-* ``add_threepid_failure.html`` and ``add_threepid_success.html``
-
-Synapse will expect these files to exist inside the configured template
-directory, and **will fail to start** if they are absent.
-To view the default templates, see `synapse/res/templates
-<https://github.com/matrix-org/synapse/tree/master/synapse/res/templates>`_.
-
-3pid verification changes
--------------------------
-
-**Note: As of this release, users will be unable to add phone numbers or email
-addresses to their accounts, without changes to the Synapse configuration. This
-includes adding an email address during registration.**
-
-It is possible for a user to associate an email address or phone number
-with their account, for a number of reasons:
-
-* for use when logging in, as an alternative to the user id.
-* in the case of email, as an alternative contact to help with account recovery.
-* in the case of email, to receive notifications of missed messages.
-
-Before an email address or phone number can be added to a user's account,
-or before such an address is used to carry out a password-reset, Synapse must
-confirm the operation with the owner of the email address or phone number.
-It does this by sending an email or text giving the user a link or token to confirm
-receipt. This process is known as '3pid verification'. ('3pid', or 'threepid',
-stands for third-party identifier, and we use it to refer to external
-identifiers such as email addresses and phone numbers.)
-
-Previous versions of Synapse delegated the task of 3pid verification to an
-identity server by default. In most cases this server is ``vector.im`` or
-``matrix.org``.
-
-In Synapse 1.4.0, for security and privacy reasons, the homeserver will no
-longer delegate this task to an identity server by default. Instead,
-the server administrator will need to explicitly decide how they would like the
-verification messages to be sent.
-
-In the medium term, the ``vector.im`` and ``matrix.org`` identity servers will
-disable support for delegated 3pid verification entirely. However, in order to
-ease the transition, they will retain the capability for a limited
-period. Delegated email verification will be disabled on Monday 2nd December
-2019 (giving roughly 2 months notice). Disabling delegated SMS verification
-will follow some time after that once SMS verification support lands in
-Synapse.
-
-Once delegated 3pid verification support has been disabled in the ``vector.im`` and
-``matrix.org`` identity servers, all Synapse versions that depend on those
-instances will be unable to verify email and phone numbers through them. There
-are no imminent plans to remove delegated 3pid verification from Sydent
-generally. (Sydent is the identity server project that backs the ``vector.im`` and
-``matrix.org`` instances).
-
-Email
-~~~~~
-Following upgrade, to continue verifying email (e.g. as part of the
-registration process), admins can either:-
-
-* Configure Synapse to use an email server.
-* Run or choose an identity server which allows delegated email verification
-  and delegate to it.
-
-Configure SMTP in Synapse
-+++++++++++++++++++++++++
-
-To configure an SMTP server for Synapse, modify the configuration section
-headed ``email``, and be sure to have at least the ``smtp_host, smtp_port``
-and ``notif_from`` fields filled out.
-
-You may also need to set ``smtp_user``, ``smtp_pass``, and
-``require_transport_security``.
-
-See the `sample configuration file <docs/sample_config.yaml>`_ for more details
-on these settings.
-
-Delegate email to an identity server
-++++++++++++++++++++++++++++++++++++
-
-Some admins will wish to continue using email verification as part of the
-registration process, but will not immediately have an appropriate SMTP server
-at hand.
-
-To this end, we will continue to support email verification delegation via the
-``vector.im`` and ``matrix.org`` identity servers for two months. Support for
-delegated email verification will be disabled on Monday 2nd December.
-
-The ``account_threepid_delegates`` dictionary defines whether the homeserver
-should delegate an external server (typically an `identity server
-<https://matrix.org/docs/spec/identity_service/r0.2.1>`_) to handle sending
-confirmation messages via email and SMS.
-
-So to delegate email verification, in ``homeserver.yaml``, set
-``account_threepid_delegates.email`` to the base URL of an identity server. For
-example:
-
-.. code:: yaml
-
-   account_threepid_delegates:
-       email: https://example.com     # Delegate email sending to example.com
-
-Note that ``account_threepid_delegates.email`` replaces the deprecated
-``email.trust_identity_server_for_password_resets``: if
-``email.trust_identity_server_for_password_resets`` is set to ``true``, and
-``account_threepid_delegates.email`` is not set, then the first entry in
-``trusted_third_party_id_servers`` will be used as the
-``account_threepid_delegate`` for email. This is to ensure compatibility with
-existing Synapse installs that set up external server handling for these tasks
-before v1.4.0. If ``email.trust_identity_server_for_password_resets`` is
-``true`` and no trusted identity server domains are configured, Synapse will
-report an error and refuse to start.
-
-If ``email.trust_identity_server_for_password_resets`` is ``false`` or absent
-and no ``email`` delegate is configured in ``account_threepid_delegates``,
-then Synapse will send email verification messages itself, using the configured
-SMTP server (see above).
-that type.
-
-Phone numbers
-~~~~~~~~~~~~~
-
-Synapse does not support phone-number verification itself, so the only way to
-maintain the ability for users to add phone numbers to their accounts will be
-by continuing to delegate phone number verification to the ``matrix.org`` and
-``vector.im`` identity servers (or another identity server that supports SMS
-sending).
-
-The ``account_threepid_delegates`` dictionary defines whether the homeserver
-should delegate an external server (typically an `identity server
-<https://matrix.org/docs/spec/identity_service/r0.2.1>`_) to handle sending
-confirmation messages via email and SMS.
-
-So to delegate phone number verification, in ``homeserver.yaml``, set
-``account_threepid_delegates.msisdn`` to the base URL of an identity
-server. For example:
-
-.. code:: yaml
-
-   account_threepid_delegates:
-       msisdn: https://example.com     # Delegate sms sending to example.com
-
-The ``matrix.org`` and ``vector.im`` identity servers will continue to support
-delegated phone number verification via SMS until such time as it is possible
-for admins to configure their servers to perform phone number verification
-directly. More details will follow in a future release.
-
-Rolling back to v1.3.1
-----------------------
-
-If you encounter problems with v1.4.0, it should be possible to roll back to
-v1.3.1, subject to the following:
-
-* The 'room statistics' engine was heavily reworked in this release (see
-  `#5971 <https://github.com/matrix-org/synapse/pull/5971>`_), including
-  significant changes to the database schema, which are not easily
-  reverted. This will cause the room statistics engine to stop updating when
-  you downgrade.
-
-  The room statistics are essentially unused in v1.3.1 (in future versions of
-  Synapse, they will be used to populate the room directory), so there should
-  be no loss of functionality. However, the statistics engine will write errors
-  to the logs, which can be avoided by setting the following in
-  `homeserver.yaml`:
-
-  .. code:: yaml
-
-    stats:
-      enabled: false
-
-  Don't forget to re-enable it when you upgrade again, in preparation for its
-  use in the room directory!
-
-Upgrading to v1.2.0
-===================
-
-Some counter metrics have been renamed, with the old names deprecated. See
-`the metrics documentation <docs/metrics-howto.md#renaming-of-metrics--deprecation-of-old-names-in-12>`_
-for details.
-
-Upgrading to v1.1.0
-===================
-
-Synapse v1.1.0 removes support for older Python and PostgreSQL versions, as
-outlined in `our deprecation notice <https://matrix.org/blog/2019/04/08/synapse-deprecating-postgres-9-4-and-python-2-x>`_.
-
-Minimum Python Version
-----------------------
-
-Synapse v1.1.0 has a minimum Python requirement of Python 3.5. Python 3.6 or
-Python 3.7 are recommended as they have improved internal string handling,
-significantly reducing memory usage.
-
-If you use current versions of the Matrix.org-distributed Debian packages or
-Docker images, action is not required.
-
-If you install Synapse in a Python virtual environment, please see "Upgrading to
-v0.34.0" for notes on setting up a new virtualenv under Python 3.
-
-Minimum PostgreSQL Version
---------------------------
-
-If using PostgreSQL under Synapse, you will need to use PostgreSQL 9.5 or above.
-Please see the
-`PostgreSQL documentation <https://www.postgresql.org/docs/11/upgrading.html>`_
-for more details on upgrading your database.
-
-Upgrading to v1.0
-=================
-
-Validation of TLS certificates
-------------------------------
-
-Synapse v1.0 is the first release to enforce
-validation of TLS certificates for the federation API. It is therefore
-essential that your certificates are correctly configured. See the `FAQ
-<docs/MSC1711_certificates_FAQ.md>`_ for more information.
-
-Note, v1.0 installations will also no longer be able to federate with servers
-that have not correctly configured their certificates.
-
-In rare cases, it may be desirable to disable certificate checking: for
-example, it might be essential to be able to federate with a given legacy
-server in a closed federation. This can be done in one of two ways:-
-
-* Configure the global switch ``federation_verify_certificates`` to ``false``.
-* Configure a whitelist of server domains to trust via ``federation_certificate_verification_whitelist``.
-
-See the `sample configuration file <docs/sample_config.yaml>`_
-for more details on these settings.
-
-Email
------
-When a user requests a password reset, Synapse will send an email to the
-user to confirm the request.
-
-Previous versions of Synapse delegated the job of sending this email to an
-identity server. If the identity server was somehow malicious or became
-compromised, it would be theoretically possible to hijack an account through
-this means.
-
-Therefore, by default, Synapse v1.0 will send the confirmation email itself. If
-Synapse is not configured with an SMTP server, password reset via email will be
-disabled.
-
-To configure an SMTP server for Synapse, modify the configuration section
-headed ``email``, and be sure to have at least the ``smtp_host``, ``smtp_port``
-and ``notif_from`` fields filled out. You may also need to set ``smtp_user``,
-``smtp_pass``, and ``require_transport_security``.
-
-If you are absolutely certain that you wish to continue using an identity
-server for password resets, set ``trust_identity_server_for_password_resets`` to ``true``.
-
-See the `sample configuration file <docs/sample_config.yaml>`_
-for more details on these settings.
-
-New email templates
----------------
-Some new templates have been added to the default template directory for the purpose of the
-homeserver sending its own password reset emails. If you have configured a custom
-``template_dir`` in your Synapse config, these files will need to be added.
-
-``password_reset.html`` and ``password_reset.txt`` are HTML and plain text templates
-respectively that contain the contents of what will be emailed to the user upon attempting to
-reset their password via email. ``password_reset_success.html`` and
-``password_reset_failure.html`` are HTML files that the content of which (assuming no redirect
-URL is set) will be shown to the user after they attempt to click the link in the email sent
-to them.
+    # replace <host.name> with the hostname of your synapse homeserver.
+    # You may need to specify a port (eg, :8448) if your server is not
+    # configured on port 443.
+    curl -kv https://<host.name>/_matrix/client/versions 2>&1 | grep "Server:"
 
 Upgrading to v0.99.0
 ====================
 
-Please be aware that, before Synapse v1.0 is released around March 2019, you
-will need to replace any self-signed certificates with those verified by a
-root CA. Information on how to do so can be found at `the ACME docs
-<docs/ACME.md>`_.
+In preparation for Synapse v1.0, you must update your TLS certificates from
+self-signed ones to verifiable ones signed by a trusted root CA.
 
-For more information on configuring TLS certificates see the `FAQ <docs/MSC1711_certificates_FAQ.md>`_.
+If you do not already have a certificate for your domain, the easiest way to get
+one is with Synapse's new ACME support, which will use the ACME protocol to
+provision a certificate automatically. By default, certificates will be obtained
+from the publicly trusted CA Let's Encrypt.
+
+For a sample configuration, please inspect the new ACME section in the example
+generated config by running the ``generate-config`` executable. For example::
+
+  ~/synapse/env3/bin/generate-config
+
+You will need to provide Let's Encrypt (or other ACME provider) access to your
+Synapse ACME challenge responder on port 80, at the domain of your homeserver.
+This requires you either change the port of the ACME listener provided by
+Synapse to a high port and reverse proxy to it, or use a tool like authbind to
+allow Synapse to listen on port 80 without root access. (Do not run Synapse with
+root permissions!)
+
+You will need to back up or delete your self signed TLS certificate
+(``example.com.tls.crt`` and ``example.com.tls.key``), Synapse's ACME
+implementation will not overwrite them.
+
+You may wish to use alternate methods such as Certbot to obtain a certificate
+from Let's Encrypt, depending on your server configuration. Of course, if you
+already have a valid certificate for your homeserver's domain, that can be
+placed in Synapse's config directory without the need for ACME.
 
 Upgrading to v0.34.0
 ====================

changelog.d/3902.feature

@@ -0,0 +1 @@
+Include m.room.encryption on invites by default

changelog.d/5727.feature

@@ -1 +0,0 @@
-Add federation support for cross-signing.

changelog.d/6140.misc

@@ -1 +0,0 @@
-Add a CI job to test the `synapse_port_db` script.

changelog.d/6164.doc

@@ -1 +0,0 @@
-Contributor documentation now mentions script to run linters.

changelog.d/6213.bugfix

@@ -1 +0,0 @@
-Fix LruCache callback deduplication for Python 3.8. Contributed by @V02460.

changelog.d/6218.misc

@@ -1 +0,0 @@
-Convert EventContext to an attrs.

changelog.d/6220.feature

@@ -1 +0,0 @@
-Increase default room version from 4 to 5, thereby enforcing server key validity period checks.

changelog.d/6232.bugfix

@@ -1 +0,0 @@
-Remove a room from a server's public rooms list on room upgrade.

changelog.d/6235.bugfix

@@ -1 +0,0 @@
-Remove a room from a server's public rooms list on room upgrade.

changelog.d/6238.feature

@@ -1 +0,0 @@
-Add support for outbound http proxying via http_proxy/HTTPS_PROXY env vars.

changelog.d/6240.misc

@@ -1 +0,0 @@
-Move `persist_events` out from main data store.

changelog.d/6250.misc

@@ -1 +0,0 @@
-Reduce verbosity of user/room stats.

changelog.d/6251.misc

@@ -1 +0,0 @@
-Reduce impact of debug logging.

changelog.d/6253.bugfix

@@ -1 +0,0 @@
-Delete keys from key backup when deleting backup versions.

changelog.d/6254.bugfix

@@ -1 +0,0 @@
-Make notification of cross-signing signatures work with workers.

changelog.d/6257.doc

@@ -1 +0,0 @@
-Modify CAPTCHA_SETUP.md to update the terms `private key` and `public key` to `secret key` and `site key` respectively. Contributed by Yash Jipkate.

changelog.d/6259.misc

@@ -1 +0,0 @@
-Expose some homeserver functionality to spam checkers.

changelog.d/6263.misc

@@ -1 +0,0 @@
-Change cache descriptors to always return deferreds.

changelog.d/6269.misc

@@ -1 +0,0 @@
-Fix incorrect comment regarding the functionality of an `if` statement.

changelog.d/6270.misc

@@ -1 +0,0 @@
-Update CI to run `isort` over the `scripts` and `scripts-dev` directories.

changelog.d/6271.misc

@@ -1 +0,0 @@
-Replace every instance of `logger.warn` method with `logger.warning` as the former is deprecated.

changelog.d/6272.doc

@@ -1 +0,0 @@
-Update `INSTALL.md` Email section to talk about `account_threepid_delegates`.

changelog.d/6273.doc

@@ -1 +0,0 @@
-Fix a small typo in `account_threepid_delegates` configuration option.

changelog.d/6274.misc

@@ -1 +0,0 @@
-Port replication http server endpoints to async/await.

changelog.d/6275.misc

@@ -1 +0,0 @@
-Port room rest handlers to async/await.

changelog.d/6276.misc

@@ -1 +0,0 @@
-Add a CI job to test the `synapse_port_db` script.

changelog.d/6277.misc

@@ -1 +0,0 @@
-Remove redundant CLI parameters on CI's `flake8` step.

changelog.d/6278.bugfix

@@ -1 +0,0 @@
-Fix exception when remote servers attempt to join a room that they're not allowed to join.

changelog.d/6279.misc

@@ -1 +0,0 @@
-Port `federation_server.py` to async/await.

changelog.d/6280.misc

@@ -1 +0,0 @@
-Port receipt and read markers to async/wait.

changelog.d/6284.bugfix

@@ -1 +0,0 @@
-Prevent errors from appearing on Synapse startup if `git` is not installed.

changelog.d/6291.misc

@@ -1 +0,0 @@
-Change cache descriptors to always return deferreds.

changelog.d/6294.misc

@@ -1 +0,0 @@
-Split out state storage into separate data store.

changelog.d/6295.misc

@@ -1 +0,0 @@
-Split out state storage into separate data store.

changelog.d/6298.misc

@@ -1 +0,0 @@
-Refactor EventContext for clarity.

changelog.d/6300.misc

@@ -1 +0,0 @@
-Move `persist_events` out from main data store.

changelog.d/6301.feature

@@ -1 +0,0 @@
-Implement label-based filtering on `/sync` and `/messages` ([MSC2326](https://github.com/matrix-org/matrix-doc/pull/2326)).

changelog.d/6304.misc

@@ -1 +0,0 @@
-Update the version of black used to 19.10b0.

changelog.d/6305.misc

@@ -1 +0,0 @@
-Add some documentation about worker replication.

changelog.d/6306.bugfix

@@ -1 +0,0 @@
-Appservice requests will no longer contain a double slash prefix when the appservice url provided ends in a slash.

changelog.d/6307.bugfix

@@ -1 +0,0 @@
-Fix `/purge_room` admin API.

changelog.d/6310.feature

@@ -1 +0,0 @@
-Implement label-based filtering on `/sync` and `/messages` ([MSC2326](https://github.com/matrix-org/matrix-doc/pull/2326)).

changelog.d/6312.misc

@@ -1 +0,0 @@
-Document the use of `lint.sh` for code style enforcement & extend it to run on specified paths only.

changelog.d/6313.bugfix

@@ -1 +0,0 @@
-Fix the `hidden` field in the `devices` table for SQLite versions prior to 3.23.0.

changelog.d/6314.misc

@@ -1 +0,0 @@
-Replace every instance of `logger.warn` method with `logger.warning` as the former is deprecated.

changelog.d/6317.misc

@@ -1 +0,0 @@
-Add optional python dependencies and dependant binary libraries to snapcraft packaging.

changelog.d/6318.misc

@@ -1 +0,0 @@
-Remove the dependency on psutil and replace functionality with the stdlib `resource` module.

changelog.d/6319.misc

@@ -1 +0,0 @@
-Improve documentation for EventContext fields.

changelog.d/6320.bugfix

@@ -1 +0,0 @@
-Fix bug which casued rejected events to be persisted with the wrong room state.

changelog.d/6330.misc

@@ -1 +0,0 @@
-Add some checks that we aren't using state from rejected events.

changelog.d/6336.misc

@@ -1 +0,0 @@
-Remove the dependency on psutil and replace functionality with the stdlib `resource` module.

changelog.d/6338.bugfix

@@ -1 +0,0 @@
-Prevent the server taking a long time to start up when guest registration is enabled.

changelog.d/6340.feature

@@ -1 +0,0 @@
-Implement label-based filtering on `/sync` and `/messages` ([MSC2326](https://github.com/matrix-org/matrix-doc/pull/2326)).

changelog.d/6341.misc

@@ -1 +0,0 @@
-Add continuous integration for python 3.8.

changelog.d/6357.misc

@@ -1 +0,0 @@
-Correct spacing/case of various instances of the word "homeserver".

changelog.d/6359.bugfix

@@ -1 +0,0 @@
-Fix bug where upgrading a guest account to a full user would fail when account validity is enabled.

changelog.d/6361.misc

@@ -1 +0,0 @@
-Temporarily blacklist the failing unit test PurgeRoomTestCase.test_purge_room.

changelog.d/6363.bugfix

@@ -1 +0,0 @@
-Fix `to_device` stream ID getting reset every time Synapse restarts, which had the potential to cause unable to decrypt errors.

changelog.d/6375.bugfix

@@ -1 +0,0 @@
-Fix `to_device` stream ID getting reset every time Synapse restarts, which had the potential to cause unable to decrypt errors.

contrib/cmdclient/console.py

@@ -15,7 +15,6 @@
 # limitations under the License.
 
 """ Starts a synapse client console. """
-from __future__ import print_function
 
 from twisted.internet import reactor, defer, threads
 from http import TwistedHttpClient
@@ -37,10 +36,9 @@ from signedjson.sign import verify_signed_json, SignatureVerifyException
 
 CONFIG_JSON = "cmdclient_config.json"
 
-# TODO: The concept of trusted identity servers has been deprecated. This option and checks
-#  should be removed
-TRUSTED_ID_SERVERS = ["localhost:8001"]
-
+TRUSTED_ID_SERVERS = [
+    'localhost:8001'
+]
 
 class SynapseCmd(cmd.Cmd):
 
@@ -60,7 +58,7 @@ class SynapseCmd(cmd.Cmd):
             "token": token,
             "verbose": "on",
             "complete_usernames": "on",
-            "send_delivery_receipts": "on",
+            "send_delivery_receipts": "on"
         }
         self.path_prefix = "/_matrix/client/api/v1"
         self.event_stream_token = "END"
@@ -111,7 +109,7 @@ class SynapseCmd(cmd.Cmd):
         by using $. E.g. 'config roomid room1' then 'raw get /rooms/$roomid'.
         """
         if len(line) == 0:
-            print(json.dumps(self.config, indent=4))
+            print json.dumps(self.config, indent=4)
             return
 
         try:
@@ -121,11 +119,12 @@ class SynapseCmd(cmd.Cmd):
             config_rules = [  # key, valid_values
                 ("verbose", ["on", "off"]),
                 ("complete_usernames", ["on", "off"]),
-                ("send_delivery_receipts", ["on", "off"]),
+                ("send_delivery_receipts", ["on", "off"])
             ]
             for key, valid_vals in config_rules:
                 if key == args["key"] and args["val"] not in valid_vals:
-                    print("%s value must be one of %s" % (args["key"], valid_vals))
+                    print "%s value must be one of %s" % (args["key"],
+                                                          valid_vals)
                     return
 
             # toggle the http client verbosity
@@ -134,11 +133,11 @@ class SynapseCmd(cmd.Cmd):
 
             # assign the new config
             self.config[args["key"]] = args["val"]
-            print(json.dumps(self.config, indent=4))
+            print json.dumps(self.config, indent=4)
 
             save_config(self.config)
         except Exception as e:
-            print(e)
+            print e
 
     def do_register(self, line):
         """Registers for a new account: "register <userid> <noupdate>"
@@ -154,32 +153,33 @@ class SynapseCmd(cmd.Cmd):
             pwd = getpass.getpass("Type a password for this user: ")
             pwd2 = getpass.getpass("Retype the password: ")
             if pwd != pwd2 or len(pwd) == 0:
-                print("Password mismatch.")
+                print "Password mismatch."
                 pwd = None
             else:
                 password = pwd
 
-        body = {"type": "m.login.password"}
+        body = {
+            "type": "m.login.password"
+        }
         if "userid" in args:
             body["user"] = args["userid"]
         if password:
             body["password"] = password
 
-        reactor.callFromThread(self._do_register, body, "noupdate" not in args)
+        reactor.callFromThread(self._do_register, body,
+                               "noupdate" not in args)
 
     @defer.inlineCallbacks
     def _do_register(self, data, update_config):
         # check the registration flows
         url = self._url() + "/register"
         json_res = yield self.http_client.do_request("GET", url)
-        print(json.dumps(json_res, indent=4))
+        print json.dumps(json_res, indent=4)
 
         passwordFlow = None
         for flow in json_res["flows"]:
-            if flow["type"] == "m.login.recaptcha" or (
-                "stages" in flow and "m.login.recaptcha" in flow["stages"]
-            ):
-                print("Unable to register: Home server requires captcha.")
+            if flow["type"] == "m.login.recaptcha" or ("stages" in flow and "m.login.recaptcha" in flow["stages"]):
+                print "Unable to register: Home server requires captcha."
                 return
             if flow["type"] == "m.login.password" and "stages" not in flow:
                 passwordFlow = flow
@@ -189,7 +189,7 @@ class SynapseCmd(cmd.Cmd):
             return
 
         json_res = yield self.http_client.do_request("POST", url, data=data)
-        print(json.dumps(json_res, indent=4))
+        print json.dumps(json_res, indent=4)
         if update_config and "user_id" in json_res:
             self.config["user"] = json_res["user_id"]
             self.config["token"] = json_res["access_token"]
@@ -201,7 +201,9 @@ class SynapseCmd(cmd.Cmd):
         """
         try:
             args = self._parse(line, ["user_id"], force_keys=True)
-            can_login = threads.blockingCallFromThread(reactor, self._check_can_login)
+            can_login = threads.blockingCallFromThread(
+                reactor,
+                self._check_can_login)
             if can_login:
                 p = getpass.getpass("Enter your password: ")
                 user = args["user_id"]
@@ -209,25 +211,29 @@ class SynapseCmd(cmd.Cmd):
                     domain = self._domain()
                     if domain:
                         user = "@" + user + ":" + domain
-
+                
                 reactor.callFromThread(self._do_login, user, p)
-                # print " got %s " % p
+                #print " got %s " % p
         except Exception as e:
-            print(e)
+            print e
 
     @defer.inlineCallbacks
     def _do_login(self, user, password):
         path = "/login"
-        data = {"user": user, "password": password, "type": "m.login.password"}
+        data = {
+            "user": user,
+            "password": password,
+            "type": "m.login.password"
+        }
         url = self._url() + path
         json_res = yield self.http_client.do_request("POST", url, data=data)
-        print(json_res)
+        print json_res
 
         if "access_token" in json_res:
             self.config["user"] = user
             self.config["token"] = json_res["access_token"]
             save_config(self.config)
-            print("Login successful.")
+            print "Login successful."
 
     @defer.inlineCallbacks
     def _check_can_login(self):
@@ -236,19 +242,18 @@ class SynapseCmd(cmd.Cmd):
         # submitting!
         url = self._url() + path
         json_res = yield self.http_client.do_request("GET", url)
-        print(json_res)
+        print json_res
 
         if "flows" not in json_res:
-            print("Failed to find any login flows.")
+            print "Failed to find any login flows."
             defer.returnValue(False)
 
-        flow = json_res["flows"][0]  # assume first is the one we want.
-        if "type" not in flow or "m.login.password" != flow["type"] or "stages" in flow:
+        flow = json_res["flows"][0] # assume first is the one we want.
+        if ("type" not in flow or "m.login.password" != flow["type"] or
+                "stages" in flow):
             fallback_url = self._url() + "/login/fallback"
-            print(
-                "Unable to login via the command line client. Please visit "
-                "%s to login." % fallback_url
-            )
+            print ("Unable to login via the command line client. Please visit "
+                "%s to login." % fallback_url)
             defer.returnValue(False)
         defer.returnValue(True)
 
@@ -258,34 +263,21 @@ class SynapseCmd(cmd.Cmd):
         <clientSecret> A string of characters generated when requesting an email that you'll supply in subsequent calls to identify yourself
         <sendAttempt> The number of times the user has requested an email. Leave this the same between requests to retry the request at the transport level. Increment it to request that the email be sent again.
         """
-        args = self._parse(line, ["address", "clientSecret", "sendAttempt"])
+        args = self._parse(line, ['address', 'clientSecret', 'sendAttempt'])
 
-        postArgs = {
-            "email": args["address"],
-            "clientSecret": args["clientSecret"],
-            "sendAttempt": args["sendAttempt"],
-        }
+        postArgs = {'email': args['address'], 'clientSecret': args['clientSecret'], 'sendAttempt': args['sendAttempt']}
 
         reactor.callFromThread(self._do_emailrequest, postArgs)
 
     @defer.inlineCallbacks
     def _do_emailrequest(self, args):
-        # TODO: Update to use v2 Identity Service API endpoint
-        url = (
-            self._identityServerUrl()
-            + "/_matrix/identity/api/v1/validate/email/requestToken"
-        )
+        url = self._identityServerUrl()+"/_matrix/identity/api/v1/validate/email/requestToken"
 
-        json_res = yield self.http_client.do_request(
-            "POST",
-            url,
-            data=urllib.urlencode(args),
-            jsonreq=False,
-            headers={"Content-Type": ["application/x-www-form-urlencoded"]},
-        )
-        print(json_res)
-        if "sid" in json_res:
-            print("Token sent. Your session ID is %s" % (json_res["sid"]))
+        json_res = yield self.http_client.do_request("POST", url, data=urllib.urlencode(args), jsonreq=False,
+                                                     headers={'Content-Type': ['application/x-www-form-urlencoded']})
+        print json_res
+        if 'sid' in json_res:
+            print "Token sent. Your session ID is %s" % (json_res['sid'])
 
     def do_emailvalidate(self, line):
         """Validate and associate a third party ID
@@ -293,58 +285,39 @@ class SynapseCmd(cmd.Cmd):
         <token> The token sent to your third party identifier address
         <clientSecret> The same clientSecret you supplied in requestToken
         """
-        args = self._parse(line, ["sid", "token", "clientSecret"])
+        args = self._parse(line, ['sid', 'token', 'clientSecret'])
 
-        postArgs = {
-            "sid": args["sid"],
-            "token": args["token"],
-            "clientSecret": args["clientSecret"],
-        }
+        postArgs = { 'sid' : args['sid'], 'token' : args['token'], 'clientSecret': args['clientSecret'] }
 
         reactor.callFromThread(self._do_emailvalidate, postArgs)
 
     @defer.inlineCallbacks
     def _do_emailvalidate(self, args):
-        # TODO: Update to use v2 Identity Service API endpoint
-        url = (
-            self._identityServerUrl()
-            + "/_matrix/identity/api/v1/validate/email/submitToken"
-        )
+        url = self._identityServerUrl()+"/_matrix/identity/api/v1/validate/email/submitToken"
 
-        json_res = yield self.http_client.do_request(
-            "POST",
-            url,
-            data=urllib.urlencode(args),
-            jsonreq=False,
-            headers={"Content-Type": ["application/x-www-form-urlencoded"]},
-        )
-        print(json_res)
+        json_res = yield self.http_client.do_request("POST", url, data=urllib.urlencode(args), jsonreq=False,
+                                                     headers={'Content-Type': ['application/x-www-form-urlencoded']})
+        print json_res
 
     def do_3pidbind(self, line):
         """Validate and associate a third party ID
         <sid> The session ID (sid) given to you in the response to requestToken
         <clientSecret> The same clientSecret you supplied in requestToken
         """
-        args = self._parse(line, ["sid", "clientSecret"])
+        args = self._parse(line, ['sid', 'clientSecret'])
 
-        postArgs = {"sid": args["sid"], "clientSecret": args["clientSecret"]}
-        postArgs["mxid"] = self.config["user"]
+        postArgs = { 'sid' : args['sid'], 'clientSecret': args['clientSecret'] }
+        postArgs['mxid'] = self.config["user"]
 
         reactor.callFromThread(self._do_3pidbind, postArgs)
 
     @defer.inlineCallbacks
     def _do_3pidbind(self, args):
-        # TODO: Update to use v2 Identity Service API endpoint
-        url = self._identityServerUrl() + "/_matrix/identity/api/v1/3pid/bind"
+        url = self._identityServerUrl()+"/_matrix/identity/api/v1/3pid/bind"
 
-        json_res = yield self.http_client.do_request(
-            "POST",
-            url,
-            data=urllib.urlencode(args),
-            jsonreq=False,
-            headers={"Content-Type": ["application/x-www-form-urlencoded"]},
-        )
-        print(json_res)
+        json_res = yield self.http_client.do_request("POST", url, data=urllib.urlencode(args), jsonreq=False,
+                                                     headers={'Content-Type': ['application/x-www-form-urlencoded']})
+        print json_res
 
     def do_join(self, line):
         """Joins a room: "join <roomid>" """
@@ -352,7 +325,7 @@ class SynapseCmd(cmd.Cmd):
             args = self._parse(line, ["roomid"], force_keys=True)
             self._do_membership_change(args["roomid"], "join", self._usr())
         except Exception as e:
-            print(e)
+            print e
 
     def do_joinalias(self, line):
         try:
@@ -360,7 +333,7 @@ class SynapseCmd(cmd.Cmd):
             path = "/join/%s" % urllib.quote(args["roomname"])
             reactor.callFromThread(self._run_and_pprint, "POST", path, {})
         except Exception as e:
-            print(e)
+            print e
 
     def do_topic(self, line):
         """"topic [set|get] <roomid> [<newtopic>]"
@@ -370,24 +343,26 @@ class SynapseCmd(cmd.Cmd):
         try:
             args = self._parse(line, ["action", "roomid", "topic"])
             if "action" not in args or "roomid" not in args:
-                print("Must specify set|get and a room ID.")
+                print "Must specify set|get and a room ID."
                 return
             if args["action"].lower() not in ["set", "get"]:
-                print("Must specify set|get, not %s" % args["action"])
+                print "Must specify set|get, not %s" % args["action"]
                 return
 
             path = "/rooms/%s/topic" % urllib.quote(args["roomid"])
 
             if args["action"].lower() == "set":
                 if "topic" not in args:
-                    print("Must specify a new topic.")
+                    print "Must specify a new topic."
                     return
-                body = {"topic": args["topic"]}
+                body = {
+                    "topic": args["topic"]
+                }
                 reactor.callFromThread(self._run_and_pprint, "PUT", path, body)
             elif args["action"].lower() == "get":
                 reactor.callFromThread(self._run_and_pprint, "GET", path)
         except Exception as e:
-            print(e)
+            print e
 
     def do_invite(self, line):
         """Invite a user to a room: "invite <userid> <roomid>" """
@@ -398,66 +373,49 @@ class SynapseCmd(cmd.Cmd):
 
             reactor.callFromThread(self._do_invite, args["roomid"], user_id)
         except Exception as e:
-            print(e)
+            print e
 
     @defer.inlineCallbacks
     def _do_invite(self, roomid, userstring):
-        if not userstring.startswith("@") and self._is_on("complete_usernames"):
-            # TODO: Update to use v2 Identity Service API endpoint
-            url = self._identityServerUrl() + "/_matrix/identity/api/v1/lookup"
+        if (not userstring.startswith('@') and
+                    self._is_on("complete_usernames")):
+            url = self._identityServerUrl()+"/_matrix/identity/api/v1/lookup"
 
-            json_res = yield self.http_client.do_request(
-                "GET", url, qparams={"medium": "email", "address": userstring}
-            )
+            json_res = yield self.http_client.do_request("GET", url, qparams={'medium':'email','address':userstring})
 
             mxid = None
 
-            if "mxid" in json_res and "signatures" in json_res:
-                # TODO: Update to use v2 Identity Service API endpoint
-                url = (
-                    self._identityServerUrl()
-                    + "/_matrix/identity/api/v1/pubkey/ed25519"
-                )
+            if 'mxid' in json_res and 'signatures' in json_res:
+                url = self._identityServerUrl()+"/_matrix/identity/api/v1/pubkey/ed25519"
 
                 pubKey = None
                 pubKeyObj = yield self.http_client.do_request("GET", url)
-                if "public_key" in pubKeyObj:
-                    pubKey = nacl.signing.VerifyKey(
-                        pubKeyObj["public_key"], encoder=nacl.encoding.HexEncoder
-                    )
+                if 'public_key' in pubKeyObj:
+                    pubKey = nacl.signing.VerifyKey(pubKeyObj['public_key'], encoder=nacl.encoding.HexEncoder)
                 else:
-                    print("No public key found in pubkey response!")
+                    print "No public key found in pubkey response!"
 
                 sigValid = False
 
                 if pubKey:
-                    for signame in json_res["signatures"]:
+                    for signame in json_res['signatures']:
                         if signame not in TRUSTED_ID_SERVERS:
-                            print(
-                                "Ignoring signature from untrusted server %s"
-                                % (signame)
-                            )
+                            print "Ignoring signature from untrusted server %s" % (signame)
                         else:
                             try:
                                 verify_signed_json(json_res, signame, pubKey)
                                 sigValid = True
-                                print(
-                                    "Mapping %s -> %s correctly signed by %s"
-                                    % (userstring, json_res["mxid"], signame)
-                                )
+                                print "Mapping %s -> %s correctly signed by %s" % (userstring, json_res['mxid'], signame)
                                 break
                             except SignatureVerifyException as e:
-                                print("Invalid signature from %s" % (signame))
-                                print(e)
+                                print "Invalid signature from %s" % (signame)
+                                print e
 
                 if sigValid:
-                    print("Resolved 3pid %s to %s" % (userstring, json_res["mxid"]))
-                    mxid = json_res["mxid"]
+                    print "Resolved 3pid %s to %s" % (userstring, json_res['mxid'])
+                    mxid = json_res['mxid']
                 else:
-                    print(
-                        "Got association for %s but couldn't verify signature"
-                        % (userstring)
-                    )
+                    print "Got association for %s but couldn't verify signature" % (userstring)
 
             if not mxid:
                 mxid = "@" + userstring + ":" + self._domain()
@@ -470,17 +428,18 @@ class SynapseCmd(cmd.Cmd):
             args = self._parse(line, ["roomid"], force_keys=True)
             self._do_membership_change(args["roomid"], "leave", self._usr())
         except Exception as e:
-            print(e)
+            print e
 
     def do_send(self, line):
         """Sends a message. "send <roomid> <body>" """
         args = self._parse(line, ["roomid", "body"])
         txn_id = "txn%s" % int(time.time())
-        path = "/rooms/%s/send/m.room.message/%s" % (
-            urllib.quote(args["roomid"]),
-            txn_id,
-        )
-        body_json = {"msgtype": "m.text", "body": args["body"]}
+        path = "/rooms/%s/send/m.room.message/%s" % (urllib.quote(args["roomid"]),
+                                             txn_id)
+        body_json = {
+            "msgtype": "m.text",
+            "body": args["body"]
+        }
         reactor.callFromThread(self._run_and_pprint, "PUT", path, body_json)
 
     def do_list(self, line):
@@ -494,10 +453,10 @@ class SynapseCmd(cmd.Cmd):
         """
         args = self._parse(line, ["type", "roomid", "qp"])
         if not "type" in args or not "roomid" in args:
-            print("Must specify type and room ID.")
+            print "Must specify type and room ID."
             return
         if args["type"] not in ["members", "messages"]:
-            print("Unrecognised type: %s" % args["type"])
+            print "Unrecognised type: %s" % args["type"]
             return
         room_id = args["roomid"]
         path = "/rooms/%s/%s" % (urllib.quote(room_id), args["type"])
@@ -509,10 +468,11 @@ class SynapseCmd(cmd.Cmd):
                     key_value = key_value_str.split("=")
                     qp[key_value[0]] = key_value[1]
                 except:
-                    print("Bad query param: %s" % key_value)
+                    print "Bad query param: %s" % key_value
                     return
 
-        reactor.callFromThread(self._run_and_pprint, "GET", path, query_params=qp)
+        reactor.callFromThread(self._run_and_pprint, "GET", path,
+                               query_params=qp)
 
     def do_create(self, line):
         """Creates a room.
@@ -548,22 +508,14 @@ class SynapseCmd(cmd.Cmd):
         args = self._parse(line, ["method", "path", "data"])
         # sanity check
         if "method" not in args or "path" not in args:
-            print("Must specify path and method.")
+            print "Must specify path and method."
             return
 
         args["method"] = args["method"].upper()
-        valid_methods = [
-            "PUT",
-            "GET",
-            "POST",
-            "DELETE",
-            "XPUT",
-            "XGET",
-            "XPOST",
-            "XDELETE",
-        ]
+        valid_methods = ["PUT", "GET", "POST", "DELETE",
+                         "XPUT", "XGET", "XPOST", "XDELETE"]
         if args["method"] not in valid_methods:
-            print("Unsupported method: %s" % args["method"])
+            print "Unsupported method: %s" % args["method"]
             return
 
         if "data" not in args:
@@ -572,7 +524,7 @@ class SynapseCmd(cmd.Cmd):
             try:
                 args["data"] = json.loads(args["data"])
             except Exception as e:
-                print("Data is not valid JSON. %s" % e)
+                print "Data is not valid JSON. %s" % e
                 return
 
         qp = {"access_token": self._tok()}
@@ -588,13 +540,10 @@ class SynapseCmd(cmd.Cmd):
             except:
                 pass
 
-        reactor.callFromThread(
-            self._run_and_pprint,
-            args["method"],
-            args["path"],
-            args["data"],
-            query_params=qp,
-        )
+        reactor.callFromThread(self._run_and_pprint, args["method"],
+                                                     args["path"],
+                                                     args["data"],
+                                                     query_params=qp)
 
     def do_stream(self, line):
         """Stream data from the server: "stream <longpoll timeout ms>" """
@@ -604,29 +553,26 @@ class SynapseCmd(cmd.Cmd):
             try:
                 timeout = int(args["timeout"])
             except ValueError:
-                print("Timeout must be in milliseconds.")
+                print "Timeout must be in milliseconds."
                 return
         reactor.callFromThread(self._do_event_stream, timeout)
 
     @defer.inlineCallbacks
     def _do_event_stream(self, timeout):
         res = yield self.http_client.get_json(
-            self._url() + "/events",
-            {
-                "access_token": self._tok(),
-                "timeout": str(timeout),
-                "from": self.event_stream_token,
-            },
-        )
-        print(json.dumps(res, indent=4))
+                self._url() + "/events",
+                {
+                    "access_token": self._tok(),
+                    "timeout": str(timeout),
+                    "from": self.event_stream_token
+                })
+        print json.dumps(res, indent=4)
 
         if "chunk" in res:
             for event in res["chunk"]:
-                if (
-                    event["type"] == "m.room.message"
-                    and self._is_on("send_delivery_receipts")
-                    and event["user_id"] != self._usr()
-                ):  # not sent by us
+                if (event["type"] == "m.room.message" and
+                        self._is_on("send_delivery_receipts") and
+                        event["user_id"] != self._usr()):  # not sent by us
                     self._send_receipt(event, "d")
 
         # update the position in the stram
@@ -634,28 +580,18 @@ class SynapseCmd(cmd.Cmd):
             self.event_stream_token = res["end"]
 
     def _send_receipt(self, event, feedback_type):
-        path = "/rooms/%s/messages/%s/%s/feedback/%s/%s" % (
-            urllib.quote(event["room_id"]),
-            event["user_id"],
-            event["msg_id"],
-            self._usr(),
-            feedback_type,
-        )
+        path = ("/rooms/%s/messages/%s/%s/feedback/%s/%s" %
+               (urllib.quote(event["room_id"]), event["user_id"], event["msg_id"],
+                self._usr(), feedback_type))
         data = {}
-        reactor.callFromThread(
-            self._run_and_pprint,
-            "PUT",
-            path,
-            data=data,
-            alt_text="Sent receipt for %s" % event["msg_id"],
-        )
+        reactor.callFromThread(self._run_and_pprint, "PUT", path, data=data,
+                               alt_text="Sent receipt for %s" % event["msg_id"])
 
     def _do_membership_change(self, roomid, membership, userid):
-        path = "/rooms/%s/state/m.room.member/%s" % (
-            urllib.quote(roomid),
-            urllib.quote(userid),
-        )
-        data = {"membership": membership}
+        path = "/rooms/%s/state/m.room.member/%s" % (urllib.quote(roomid), urllib.quote(userid))
+        data = {
+            "membership": membership
+        }
         reactor.callFromThread(self._run_and_pprint, "PUT", path, data=data)
 
     def do_displayname(self, line):
@@ -708,20 +644,15 @@ class SynapseCmd(cmd.Cmd):
         for i, arg in enumerate(line_args):
             for config_key in self.config:
                 if ("$" + config_key) in arg:
-                    arg = arg.replace("$" + config_key, self.config[config_key])
+                    arg = arg.replace("$" + config_key,
+                                      self.config[config_key])
             line_args[i] = arg
 
         return dict(zip(keys, line_args))
 
     @defer.inlineCallbacks
-    def _run_and_pprint(
-        self,
-        method,
-        path,
-        data=None,
-        query_params={"access_token": None},
-        alt_text=None,
-    ):
+    def _run_and_pprint(self, method, path, data=None,
+                        query_params={"access_token": None}, alt_text=None):
         """ Runs an HTTP request and pretty prints the output.
 
         Args:
@@ -734,31 +665,31 @@ class SynapseCmd(cmd.Cmd):
         if "access_token" in query_params:
             query_params["access_token"] = self._tok()
 
-        json_res = yield self.http_client.do_request(
-            method, url, data=data, qparams=query_params
-        )
+        json_res = yield self.http_client.do_request(method, url,
+                                                    data=data,
+                                                    qparams=query_params)
         if alt_text:
-            print(alt_text)
+            print alt_text
         else:
-            print(json.dumps(json_res, indent=4))
+            print json.dumps(json_res, indent=4)
 
 
 def save_config(config):
-    with open(CONFIG_JSON, "w") as out:
+    with open(CONFIG_JSON, 'w') as out:
         json.dump(config, out)
 
 
 def main(server_url, identity_server_url, username, token, config_path):
-    print("Synapse command line client")
-    print("===========================")
-    print("Server: %s" % server_url)
-    print("Type 'help' to get started.")
-    print("Close this console with CTRL+C then CTRL+D.")
+    print "Synapse command line client"
+    print "==========================="
+    print "Server: %s" % server_url
+    print "Type 'help' to get started."
+    print "Close this console with CTRL+C then CTRL+D."
     if not username or not token:
-        print("-  'register <username>' - Register an account")
-        print("-  'stream' - Connect to the event stream")
-        print("-  'create <roomid>' - Create a room")
-        print("-  'send <roomid> <message>' - Send a message")
+        print "-  'register <username>' - Register an account"
+        print "-  'stream' - Connect to the event stream"
+        print "-  'create <roomid>' - Create a room"
+        print "-  'send <roomid> <message>' - Send a message"
     http_client = TwistedHttpClient()
 
     # the command line client
@@ -768,13 +699,13 @@ def main(server_url, identity_server_url, username, token, config_path):
     global CONFIG_JSON
     CONFIG_JSON = config_path  # bit cheeky, but just overwrite the global
     try:
-        with open(config_path, "r") as config:
+        with open(config_path, 'r') as config:
             syn_cmd.config = json.load(config)
             try:
                 http_client.verbose = "on" == syn_cmd.config["verbose"]
             except:
                 pass
-            print("Loaded config from %s" % config_path)
+            print "Loaded config from %s" % config_path
     except:
         pass
 
@@ -785,37 +716,27 @@ def main(server_url, identity_server_url, username, token, config_path):
     reactor.run()
 
 
-if __name__ == "__main__":
+if __name__ == '__main__':
     parser = argparse.ArgumentParser("Starts a synapse client.")
     parser.add_argument(
-        "-s",
-        "--server",
-        dest="server",
-        default="http://localhost:8008",
-        help="The URL of the home server to talk to.",
-    )
+        "-s", "--server", dest="server", default="http://localhost:8008",
+        help="The URL of the home server to talk to.")
     parser.add_argument(
-        "-i",
-        "--identity-server",
-        dest="identityserver",
-        default="http://localhost:8090",
-        help="The URL of the identity server to talk to.",
-    )
+        "-i", "--identity-server", dest="identityserver", default="http://localhost:8090",
+        help="The URL of the identity server to talk to.")
     parser.add_argument(
-        "-u", "--username", dest="username", help="Your username on the server."
-    )
-    parser.add_argument("-t", "--token", dest="token", help="Your access token.")
+        "-u", "--username", dest="username",
+        help="Your username on the server.")
     parser.add_argument(
-        "-c",
-        "--config",
-        dest="config",
-        default=CONFIG_JSON,
-        help="The location of the config.json file to read from.",
-    )
+        "-t", "--token", dest="token",
+        help="Your access token.")
+    parser.add_argument(
+        "-c", "--config", dest="config", default=CONFIG_JSON,
+        help="The location of the config.json file to read from.")
     args = parser.parse_args()
 
     if not args.server:
-        print("You must supply a server URL to communicate with.")
+        print "You must supply a server URL to communicate with."
         parser.print_help()
         sys.exit(1)
 

contrib/cmdclient/http.py

@@ -13,7 +13,6 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-from __future__ import print_function
 from twisted.web.client import Agent, readBody
 from twisted.web.http_headers import Headers
 from twisted.internet import defer, reactor
@@ -73,7 +72,9 @@ class TwistedHttpClient(HttpClient):
     @defer.inlineCallbacks
     def put_json(self, url, data):
         response = yield self._create_put_request(
-            url, data, headers_dict={"Content-Type": ["application/json"]}
+            url,
+            data,
+            headers_dict={"Content-Type": ["application/json"]}
         )
         body = yield readBody(response)
         defer.returnValue((response.code, body))
@@ -93,34 +94,40 @@ class TwistedHttpClient(HttpClient):
         """
 
         if "Content-Type" not in headers_dict:
-            raise defer.error(RuntimeError("Must include Content-Type header for PUTs"))
+            raise defer.error(
+                RuntimeError("Must include Content-Type header for PUTs"))
 
         return self._create_request(
-            "PUT", url, producer=_JsonProducer(json_data), headers_dict=headers_dict
+            "PUT",
+            url,
+            producer=_JsonProducer(json_data),
+            headers_dict=headers_dict
         )
 
     def _create_get_request(self, url, headers_dict={}):
         """ Wrapper of _create_request to issue a GET request
         """
-        return self._create_request("GET", url, headers_dict=headers_dict)
+        return self._create_request(
+            "GET",
+            url,
+            headers_dict=headers_dict
+        )
 
     @defer.inlineCallbacks
-    def do_request(
-        self, method, url, data=None, qparams=None, jsonreq=True, headers={}
-    ):
+    def do_request(self, method, url, data=None, qparams=None, jsonreq=True, headers={}):
         if qparams:
             url = "%s?%s" % (url, urllib.urlencode(qparams, True))
 
         if jsonreq:
             prod = _JsonProducer(data)
-            headers["Content-Type"] = ["application/json"]
+            headers['Content-Type'] = ["application/json"];
         else:
             prod = _RawProducer(data)
 
         if method in ["POST", "PUT"]:
-            response = yield self._create_request(
-                method, url, producer=prod, headers_dict=headers
-            )
+            response = yield self._create_request(method, url,
+                    producer=prod,
+                    headers_dict=headers)
         else:
             response = yield self._create_request(method, url)
 
@@ -134,24 +141,27 @@ class TwistedHttpClient(HttpClient):
         headers_dict["User-Agent"] = ["Synapse Cmd Client"]
 
         retries_left = 5
-        print("%s to %s with headers %s" % (method, url, headers_dict))
+        print "%s to %s with headers %s" % (method, url, headers_dict)
         if self.verbose and producer:
             if "password" in producer.data:
                 temp = producer.data["password"]
                 producer.data["password"] = "[REDACTED]"
-                print(json.dumps(producer.data, indent=4))
+                print json.dumps(producer.data, indent=4)
                 producer.data["password"] = temp
             else:
-                print(json.dumps(producer.data, indent=4))
+                print json.dumps(producer.data, indent=4)
 
         while True:
             try:
                 response = yield self.agent.request(
-                    method, url.encode("UTF8"), Headers(headers_dict), producer
+                    method,
+                    url.encode("UTF8"),
+                    Headers(headers_dict),
+                    producer
                 )
                 break
             except Exception as e:
-                print("uh oh: %s" % e)
+                print "uh oh: %s" % e
                 if retries_left:
                     yield self.sleep(2 ** (5 - retries_left))
                     retries_left -= 1
@@ -159,8 +169,8 @@ class TwistedHttpClient(HttpClient):
                     raise e
 
         if self.verbose:
-            print("Status %s %s" % (response.code, response.phrase))
-            print(pformat(list(response.headers.getAllRawHeaders())))
+            print "Status %s %s" % (response.code, response.phrase)
+            print pformat(list(response.headers.getAllRawHeaders()))
         defer.returnValue(response)
 
     def sleep(self, seconds):
@@ -168,7 +178,6 @@ class TwistedHttpClient(HttpClient):
         reactor.callLater(seconds, d.callback, seconds)
         return d
 
-
 class _RawProducer(object):
     def __init__(self, data):
         self.data = data
@@ -185,11 +194,9 @@ class _RawProducer(object):
     def stopProducing(self):
         pass
 
-
 class _JsonProducer(object):
     """ Used by the twisted http client to create the HTTP body from json
     """
-
     def __init__(self, jsn):
         self.data = jsn
         self.body = json.dumps(jsn).encode("utf8")

contrib/docker/README.md

@@ -1,26 +1,35 @@
-
 # Synapse Docker
 
-### Configuration
+### Automated configuration
+
+It is recommended that you use Docker Compose to run your containers, including
+this image and a Postgres server. A sample ``docker-compose.yml`` is provided,
+including example labels for reverse proxying and other artifacts.
+
+Read the section about environment variables and set at least mandatory variables,
+then run the server:
+
+```
+docker-compose up -d
+```
+
+If secrets are not specified in the environment variables, they will be generated
+as part of the startup. Please ensure these secrets are kept between launches of the
+Docker container, as their loss may require users to log in again.
+
+### Manual configuration
 
 A sample ``docker-compose.yml`` is provided, including example labels for
 reverse proxying and other artifacts. The docker-compose file is an example,
 please comment/uncomment sections that are not suitable for your usecase.
 
 Specify a ``SYNAPSE_CONFIG_PATH``, preferably to a persistent path,
-to use manual configuration.
-
-To generate a fresh `homeserver.yaml`, you can use the `generate` command.
-(See the [documentation](../../docker/README.md#generating-a-configuration-file)
-for more information.) You will need to specify appropriate values for at least the
-`SYNAPSE_SERVER_NAME` and `SYNAPSE_REPORT_STATS` environment variables. For example:
+to use manual configuration. To generate a fresh ``homeserver.yaml``, simply run:
 
 ```
-docker-compose run --rm -e SYNAPSE_SERVER_NAME=my.matrix.host -e SYNAPSE_REPORT_STATS=yes synapse generate
+docker-compose run --rm -e SYNAPSE_SERVER_NAME=my.matrix.host synapse generate
 ```
 
-(This will also generate necessary signing keys.)
-
 Then, customize your configuration and run the server:
 
 ```

contrib/docker/docker-compose.yml

@@ -15,10 +15,13 @@ services:
     restart: unless-stopped
     # See the readme for a full documentation of the environment settings
     environment:
-      - SYNAPSE_CONFIG_PATH=/etc/homeserver.yaml
+      - SYNAPSE_SERVER_NAME=my.matrix.host
+      - SYNAPSE_REPORT_STATS=no
+      - SYNAPSE_ENABLE_REGISTRATION=yes
+      - SYNAPSE_LOG_LEVEL=INFO
+      - POSTGRES_PASSWORD=changeme
     volumes:
       # You may either store all the files in a local folder
-      - ./matrix-config:/etc
       - ./files:/data
       # .. or you may split this between different storage points
       # - ./files:/data
@@ -32,23 +35,9 @@ services:
       - 8448:8448/tcp
     # ... or use a reverse proxy, here is an example for traefik:
     labels:
-      # The following lines are valid for Traefik version 1.x:
       - traefik.enable=true
       - traefik.frontend.rule=Host:my.matrix.Host
       - traefik.port=8008
-      # Alternatively, for Traefik version 2.0:
-      - traefik.enable=true
-      - traefik.http.routers.http-synapse.entryPoints=http
-      - traefik.http.routers.http-synapse.rule=Host(`my.matrix.host`)
-      - traefik.http.middlewares.https_redirect.redirectscheme.scheme=https
-      - traefik.http.middlewares.https_redirect.redirectscheme.permanent=true
-      - traefik.http.routers.http-synapse.middlewares=https_redirect
-      - traefik.http.routers.https-synapse.entryPoints=https
-      - traefik.http.routers.https-synapse.rule=Host(`my.matrix.host`)
-      - traefik.http.routers.https-synapse.service=synapse
-      - traefik.http.routers.https-synapse.tls=true
-      - traefik.http.services.synapse.loadbalancer.server.port=8008
-      - traefik.http.routers.https-synapse.tls.certResolver=le-ssl
 
   db:
     image: docker.io/postgres:10-alpine

contrib/example_log_config.yaml

@@ -1,7 +1,7 @@
-# Example log_config file for synapse. To enable, point `log_config` to it in
+# Example log_config file for synapse. To enable, point `log_config` to it in 
 # `homeserver.yaml`, and restart synapse.
 #
-# This configuration will produce similar results to the defaults within
+# This configuration will produce similar results to the defaults within 
 # synapse, but can be edited to give more flexibility.
 
 version: 1
@@ -12,14 +12,13 @@ formatters:
 
 filters:
   context:
-    (): synapse.logging.context.LoggingContextFilter
+    (): synapse.util.logcontext.LoggingContextFilter
     request: ""
 
 handlers:
   # example output to console
   console:
     class: logging.StreamHandler
-    formatter: fmt
     filters: [context]
 
   # example output to file - to enable, edit 'root' config below.
@@ -30,12 +29,12 @@ handlers:
     maxBytes: 100000000
     backupCount: 3
     filters: [context]
-    encoding: utf8
+
 
 root:
     level: INFO
     handlers: [console] # to use file handler instead, switch to [file]
-
+    
 loggers:
     synapse:
         level: INFO

contrib/experiments/cursesio.py

@@ -19,13 +19,13 @@ from curses.ascii import isprint
 from twisted.internet import reactor
 
 
-class CursesStdIO:
+class CursesStdIO():
     def __init__(self, stdscr, callback=None):
         self.statusText = "Synapse test app -"
-        self.searchText = ""
+        self.searchText = ''
         self.stdscr = stdscr
 
-        self.logLine = ""
+        self.logLine = ''
 
         self.callback = callback
 
@@ -71,7 +71,8 @@ class CursesStdIO:
         i = 0
         index = len(self.lines) - 1
         while i < (self.rows - 3) and index >= 0:
-            self.stdscr.addstr(self.rows - 3 - i, 0, self.lines[index], curses.A_NORMAL)
+            self.stdscr.addstr(self.rows - 3 - i, 0, self.lines[index],
+                               curses.A_NORMAL)
             i = i + 1
             index = index - 1
 
@@ -84,13 +85,15 @@ class CursesStdIO:
             raise RuntimeError("TextTooLongError")
 
         self.stdscr.addstr(
-            self.rows - 2, 0, text + " " * (self.cols - len(text)), curses.A_STANDOUT
-        )
+            self.rows - 2, 0,
+            text + ' ' * (self.cols - len(text)),
+            curses.A_STANDOUT)
 
     def printLogLine(self, text):
         self.stdscr.addstr(
-            0, 0, text + " " * (self.cols - len(text)), curses.A_STANDOUT
-        )
+            0, 0,
+            text + ' ' * (self.cols - len(text)),
+            curses.A_STANDOUT)
 
     def doRead(self):
         """ Input is ready! """
@@ -102,7 +105,7 @@ class CursesStdIO:
 
         elif c == curses.KEY_ENTER or c == 10:
             text = self.searchText
-            self.searchText = ""
+            self.searchText = ''
 
             self.print_line(">> %s" % text)
 
@@ -119,13 +122,11 @@ class CursesStdIO:
                 return
             self.searchText = self.searchText + chr(c)
 
-        self.stdscr.addstr(
-            self.rows - 1,
-            0,
-            self.searchText + (" " * (self.cols - len(self.searchText) - 2)),
-        )
+        self.stdscr.addstr(self.rows - 1, 0,
+                           self.searchText + (' ' * (
+                           self.cols - len(self.searchText) - 2)))
 
-        self.paintStatus(self.statusText + " %d" % len(self.searchText))
+        self.paintStatus(self.statusText + ' %d' % len(self.searchText))
         self.stdscr.move(self.rows - 1, len(self.searchText))
         self.stdscr.refresh()
 
@@ -142,6 +143,7 @@ class CursesStdIO:
 
 
 class Callback(object):
+
     def __init__(self, stdio):
         self.stdio = stdio
 
@@ -150,7 +152,7 @@ class Callback(object):
 
 
 def main(stdscr):
-    screen = CursesStdIO(stdscr)  # create Screen object
+    screen = CursesStdIO(stdscr)   # create Screen object
 
     callback = Callback(screen)
 
@@ -162,5 +164,5 @@ def main(stdscr):
     screen.close()
 
 
-if __name__ == "__main__":
+if __name__ == '__main__':
     curses.wrapper(main)

contrib/experiments/test_messaging.py

@@ -28,7 +28,9 @@ Currently assumes the local address is localhost:<port>
 """
 
 
-from synapse.federation import ReplicationHandler
+from synapse.federation import (
+    ReplicationHandler
+)
 
 from synapse.federation.units import Pdu
 
@@ -36,7 +38,7 @@ from synapse.util import origin_from_ucid
 
 from synapse.app.homeserver import SynapseHomeServer
 
-# from synapse.logging.utils import log_function
+#from synapse.util.logutils import log_function
 
 from twisted.internet import reactor, defer
 from twisted.python import log
@@ -78,10 +80,10 @@ class InputOutput(object):
             m = re.match("^join (\S+)$", line)
             if m:
                 # The `sender` wants to join a room.
-                (room_name,) = m.groups()
+                room_name, = m.groups()
                 self.print_line("%s joining %s" % (self.user, room_name))
                 self.server.join_room(room_name, self.user, self.user)
-                # self.print_line("OK.")
+                #self.print_line("OK.")
                 return
 
             m = re.match("^invite (\S+) (\S+)$", line)
@@ -90,7 +92,7 @@ class InputOutput(object):
                 room_name, invitee = m.groups()
                 self.print_line("%s invited to %s" % (invitee, room_name))
                 self.server.invite_to_room(room_name, self.user, invitee)
-                # self.print_line("OK.")
+                #self.print_line("OK.")
                 return
 
             m = re.match("^send (\S+) (.*)$", line)
@@ -99,13 +101,13 @@ class InputOutput(object):
                 room_name, body = m.groups()
                 self.print_line("%s send to %s" % (self.user, room_name))
                 self.server.send_message(room_name, self.user, body)
-                # self.print_line("OK.")
+                #self.print_line("OK.")
                 return
 
             m = re.match("^backfill (\S+)$", line)
             if m:
                 # we want to backfill a room
-                (room_name,) = m.groups()
+                room_name, = m.groups()
                 self.print_line("backfill %s" % room_name)
                 self.server.backfill(room_name)
                 return
@@ -123,6 +125,7 @@ class InputOutput(object):
 
 
 class IOLoggerHandler(logging.Handler):
+
     def __init__(self, io):
         logging.Handler.__init__(self)
         self.io = io
@@ -139,7 +142,6 @@ class Room(object):
     """ Used to store (in memory) the current membership state of a room, and
     which home servers we should send PDUs associated with the room to.
     """
-
     def __init__(self, room_name):
         self.room_name = room_name
         self.invited = set()
@@ -173,7 +175,6 @@ class HomeServer(ReplicationHandler):
     """ A very basic home server implentation that allows people to join a
     room and then invite other people.
     """
-
     def __init__(self, server_name, replication_layer, output):
         self.server_name = server_name
         self.replication_layer = replication_layer
@@ -196,27 +197,26 @@ class HomeServer(ReplicationHandler):
             elif pdu.content["membership"] == "invite":
                 self._on_invite(pdu.origin, pdu.context, pdu.state_key)
         else:
-            self.output.print_line(
-                "#%s (unrec) %s = %s"
-                % (pdu.context, pdu.pdu_type, json.dumps(pdu.content))
+            self.output.print_line("#%s (unrec) %s = %s" %
+                (pdu.context, pdu.pdu_type, json.dumps(pdu.content))
             )
 
-    # def on_state_change(self, pdu):
-    ##self.output.print_line("#%s (state) %s *** %s" %
-    ##(pdu.context, pdu.state_key, pdu.pdu_type)
-    ##)
+    #def on_state_change(self, pdu):
+        ##self.output.print_line("#%s (state) %s *** %s" %
+                ##(pdu.context, pdu.state_key, pdu.pdu_type)
+            ##)
 
-    # if "joinee" in pdu.content:
-    # self._on_join(pdu.context, pdu.content["joinee"])
-    # elif "invitee" in pdu.content:
-    # self._on_invite(pdu.origin, pdu.context, pdu.content["invitee"])
+        #if "joinee" in pdu.content:
+            #self._on_join(pdu.context, pdu.content["joinee"])
+        #elif "invitee" in pdu.content:
+            #self._on_invite(pdu.origin, pdu.context, pdu.content["invitee"])
 
     def _on_message(self, pdu):
         """ We received a message
         """
-        self.output.print_line(
-            "#%s %s %s" % (pdu.context, pdu.content["sender"], pdu.content["body"])
-        )
+        self.output.print_line("#%s %s %s" %
+                (pdu.context, pdu.content["sender"], pdu.content["body"])
+            )
 
     def _on_join(self, context, joinee):
         """ Someone has joined a room, either a remote user or a local user
@@ -224,7 +224,9 @@ class HomeServer(ReplicationHandler):
         room = self._get_or_create_room(context)
         room.add_participant(joinee)
 
-        self.output.print_line("#%s %s %s" % (context, joinee, "*** JOINED"))
+        self.output.print_line("#%s %s %s" %
+                (context, joinee, "*** JOINED")
+            )
 
     def _on_invite(self, origin, context, invitee):
         """ Someone has been invited
@@ -232,7 +234,9 @@ class HomeServer(ReplicationHandler):
         room = self._get_or_create_room(context)
         room.add_invited(invitee)
 
-        self.output.print_line("#%s %s %s" % (context, invitee, "*** INVITED"))
+        self.output.print_line("#%s %s %s" %
+                (context, invitee, "*** INVITED")
+            )
 
         if not room.have_got_metadata and origin is not self.server_name:
             logger.debug("Get room state")
@@ -268,14 +272,14 @@ class HomeServer(ReplicationHandler):
 
         try:
             pdu = Pdu.create_new(
-                context=room_name,
-                pdu_type="sy.room.member",
-                is_state=True,
-                state_key=joinee,
-                content={"membership": "join"},
-                origin=self.server_name,
-                destinations=destinations,
-            )
+                    context=room_name,
+                    pdu_type="sy.room.member",
+                    is_state=True,
+                    state_key=joinee,
+                    content={"membership": "join"},
+                    origin=self.server_name,
+                    destinations=destinations,
+                )
             yield self.replication_layer.send_pdu(pdu)
         except Exception as e:
             logger.exception(e)
@@ -314,21 +318,21 @@ class HomeServer(ReplicationHandler):
         return self.replication_layer.backfill(dest, room_name, limit)
 
     def _get_room_remote_servers(self, room_name):
-        return [i for i in self.joined_rooms.setdefault(room_name).servers]
+        return [i for i in self.joined_rooms.setdefault(room_name,).servers]
 
     def _get_or_create_room(self, room_name):
         return self.joined_rooms.setdefault(room_name, Room(room_name))
 
     def get_servers_for_context(self, context):
         return defer.succeed(
-            self.joined_rooms.setdefault(context, Room(context)).servers
-        )
+                self.joined_rooms.setdefault(context, Room(context)).servers
+            )
 
 
 def main(stdscr):
     parser = argparse.ArgumentParser()
-    parser.add_argument("user", type=str)
-    parser.add_argument("-v", "--verbose", action="count")
+    parser.add_argument('user', type=str)
+    parser.add_argument('-v', '--verbose', action='count')
     args = parser.parse_args()
 
     user = args.user
@@ -338,9 +342,8 @@ def main(stdscr):
 
     root_logger = logging.getLogger()
 
-    formatter = logging.Formatter(
-        "%(asctime)s - %(name)s - %(lineno)d - %(levelname)s - %(message)s"
-    )
+    formatter = logging.Formatter('%(asctime)s - %(name)s - %(lineno)d - '
+            '%(levelname)s - %(message)s')
     if not os.path.exists("logs"):
         os.makedirs("logs")
     fh = logging.FileHandler("logs/%s" % user)

contrib/graph/graph.py

@@ -1,5 +1,3 @@
-from __future__ import print_function
-
 # Copyright 2014-2016 OpenMarket Ltd
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
@@ -50,7 +48,7 @@ def make_graph(pdus, room, filename_prefix):
             c = colors.pop()
             color_map[o] = c
         except:
-            print("Run out of colours!")
+            print "Run out of colours!"
             color_map[o] = "black"
 
     graph = pydot.Dot(graph_name="Test")
@@ -59,9 +57,9 @@ def make_graph(pdus, room, filename_prefix):
         name = make_name(pdu.get("pdu_id"), pdu.get("origin"))
         pdu_map[name] = pdu
 
-        t = datetime.datetime.fromtimestamp(float(pdu["ts"]) / 1000).strftime(
-            "%Y-%m-%d %H:%M:%S,%f"
-        )
+        t = datetime.datetime.fromtimestamp(
+            float(pdu["ts"]) / 1000
+        ).strftime('%Y-%m-%d %H:%M:%S,%f')
 
         label = (
             "<"
@@ -81,7 +79,11 @@ def make_graph(pdus, room, filename_prefix):
             "depth": pdu.get("depth"),
         }
 
-        node = pydot.Node(name=name, label=label, color=color_map[pdu.get("origin")])
+        node = pydot.Node(
+            name=name,
+            label=label,
+            color=color_map[pdu.get("origin")]
+        )
         node_map[name] = node
         graph.add_node(node)
 
@@ -91,7 +93,7 @@ def make_graph(pdus, room, filename_prefix):
             end_name = make_name(i, o)
 
             if end_name not in node_map:
-                print("%s not in nodes" % end_name)
+                print "%s not in nodes" % end_name
                 continue
 
             edge = pydot.Edge(node_map[start_name], node_map[end_name])
@@ -105,13 +107,14 @@ def make_graph(pdus, room, filename_prefix):
 
             if prev_state_name in node_map:
                 state_edge = pydot.Edge(
-                    node_map[start_name], node_map[prev_state_name], style="dotted"
+                    node_map[start_name], node_map[prev_state_name],
+                    style='dotted'
                 )
                 graph.add_edge(state_edge)
 
-    graph.write("%s.dot" % filename_prefix, format="raw", prog="dot")
-    #    graph.write_png("%s.png" % filename_prefix, prog='dot')
-    graph.write_svg("%s.svg" % filename_prefix, prog="dot")
+    graph.write('%s.dot' % filename_prefix, format='raw', prog='dot')
+#    graph.write_png("%s.png" % filename_prefix, prog='dot')
+    graph.write_svg("%s.svg" % filename_prefix, prog='dot')
 
 
 def get_pdus(host, room):
@@ -127,14 +130,15 @@ def get_pdus(host, room):
 if __name__ == "__main__":
     parser = argparse.ArgumentParser(
         description="Generate a PDU graph for a given room by talking "
-        "to the given homeserver to get the list of PDUs. \n"
-        "Requires pydot."
+                    "to the given homeserver to get the list of PDUs. \n"
+                    "Requires pydot."
     )
     parser.add_argument(
-        "-p", "--prefix", dest="prefix", help="String to prefix output files with"
+        "-p", "--prefix", dest="prefix",
+        help="String to prefix output files with"
     )
-    parser.add_argument("host")
-    parser.add_argument("room")
+    parser.add_argument('host')
+    parser.add_argument('room')
 
     args = parser.parse_args()
 

contrib/graph/graph2.py

@@ -36,7 +36,10 @@ def make_graph(db_name, room_id, file_prefix, limit):
     args = [room_id]
 
     if limit:
-        sql += " ORDER BY topological_ordering DESC, stream_ordering DESC LIMIT ?"
+        sql += (
+            " ORDER BY topological_ordering DESC, stream_ordering DESC "
+            "LIMIT ?"
+        )
 
         args.append(limit)
 
@@ -53,8 +56,9 @@ def make_graph(db_name, room_id, file_prefix, limit):
 
     for event in events:
         c = conn.execute(
-            "SELECT state_group FROM event_to_state_groups WHERE event_id = ?",
-            (event.event_id,),
+            "SELECT state_group FROM event_to_state_groups "
+            "WHERE event_id = ?",
+            (event.event_id,)
         )
 
         res = c.fetchone()
@@ -65,7 +69,7 @@ def make_graph(db_name, room_id, file_prefix, limit):
 
         t = datetime.datetime.fromtimestamp(
             float(event.origin_server_ts) / 1000
-        ).strftime("%Y-%m-%d %H:%M:%S,%f")
+        ).strftime('%Y-%m-%d %H:%M:%S,%f')
 
         content = json.dumps(unfreeze(event.get_dict()["content"]))
 
@@ -89,7 +93,10 @@ def make_graph(db_name, room_id, file_prefix, limit):
             "state_group": state_group,
         }
 
-        node = pydot.Node(name=event.event_id, label=label)
+        node = pydot.Node(
+            name=event.event_id,
+            label=label,
+        )
 
         node_map[event.event_id] = node
         graph.add_node(node)
@@ -99,7 +106,10 @@ def make_graph(db_name, room_id, file_prefix, limit):
             try:
                 end_node = node_map[prev_id]
             except:
-                end_node = pydot.Node(name=prev_id, label="<<b>%s</b>>" % (prev_id,))
+                end_node = pydot.Node(
+                    name=prev_id,
+                    label="<<b>%s</b>>" % (prev_id,),
+                )
 
                 node_map[prev_id] = end_node
                 graph.add_node(end_node)
@@ -111,33 +121,36 @@ def make_graph(db_name, room_id, file_prefix, limit):
         if len(event_ids) <= 1:
             continue
 
-        cluster = pydot.Cluster(str(group), label="<State Group: %s>" % (str(group),))
+        cluster = pydot.Cluster(
+            str(group),
+            label="<State Group: %s>" % (str(group),)
+        )
 
         for event_id in event_ids:
             cluster.add_node(node_map[event_id])
 
         graph.add_subgraph(cluster)
 
-    graph.write("%s.dot" % file_prefix, format="raw", prog="dot")
-    graph.write_svg("%s.svg" % file_prefix, prog="dot")
-
+    graph.write('%s.dot' % file_prefix, format='raw', prog='dot')
+    graph.write_svg("%s.svg" % file_prefix, prog='dot')
 
 if __name__ == "__main__":
     parser = argparse.ArgumentParser(
         description="Generate a PDU graph for a given room by talking "
-        "to the given homeserver to get the list of PDUs. \n"
-        "Requires pydot."
+                    "to the given homeserver to get the list of PDUs. \n"
+                    "Requires pydot."
     )
     parser.add_argument(
-        "-p",
-        "--prefix",
-        dest="prefix",
+        "-p", "--prefix", dest="prefix",
         help="String to prefix output files with",
-        default="graph_output",
+        default="graph_output"
     )
-    parser.add_argument("-l", "--limit", help="Only retrieve the last N events.")
-    parser.add_argument("db")
-    parser.add_argument("room")
+    parser.add_argument(
+        "-l", "--limit",
+        help="Only retrieve the last N events.",
+    )
+    parser.add_argument('db')
+    parser.add_argument('room')
 
     args = parser.parse_args()
 

contrib/graph/graph3.py

@@ -1,5 +1,3 @@
-from __future__ import print_function
-
 # Copyright 2016 OpenMarket Ltd
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
@@ -28,22 +26,22 @@ from six import string_types
 
 
 def make_graph(file_name, room_id, file_prefix, limit):
-    print("Reading lines")
+    print "Reading lines"
     with open(file_name) as f:
         lines = f.readlines()
 
-    print("Read lines")
+    print "Read lines"
 
     events = [FrozenEvent(json.loads(line)) for line in lines]
 
-    print("Loaded events.")
+    print "Loaded events."
 
     events.sort(key=lambda e: e.depth)
 
-    print("Sorted events")
+    print "Sorted events"
 
     if limit:
-        events = events[-int(limit) :]
+        events = events[-int(limit):]
 
     node_map = {}
 
@@ -52,12 +50,12 @@ def make_graph(file_name, room_id, file_prefix, limit):
     for event in events:
         t = datetime.datetime.fromtimestamp(
             float(event.origin_server_ts) / 1000
-        ).strftime("%Y-%m-%d %H:%M:%S,%f")
+        ).strftime('%Y-%m-%d %H:%M:%S,%f')
 
         content = json.dumps(unfreeze(event.get_dict()["content"]), indent=4)
         content = content.replace("\n", "<br/>\n")
 
-        print(content)
+        print content
         content = []
         for key, value in unfreeze(event.get_dict()["content"]).items():
             if value is None:
@@ -68,16 +66,15 @@ def make_graph(file_name, room_id, file_prefix, limit):
                 value = json.dumps(value)
 
             content.append(
-                "<b>%s</b>: %s,"
-                % (
-                    cgi.escape(key, quote=True).encode("ascii", "xmlcharrefreplace"),
-                    cgi.escape(value, quote=True).encode("ascii", "xmlcharrefreplace"),
+                "<b>%s</b>: %s," % (
+                    cgi.escape(key, quote=True).encode("ascii", 'xmlcharrefreplace'),
+                    cgi.escape(value, quote=True).encode("ascii", 'xmlcharrefreplace'),
                 )
             )
 
         content = "<br/>\n".join(content)
 
-        print(content)
+        print content
 
         label = (
             "<"
@@ -97,19 +94,25 @@ def make_graph(file_name, room_id, file_prefix, limit):
             "depth": event.depth,
         }
 
-        node = pydot.Node(name=event.event_id, label=label)
+        node = pydot.Node(
+            name=event.event_id,
+            label=label,
+        )
 
         node_map[event.event_id] = node
         graph.add_node(node)
 
-    print("Created Nodes")
+    print "Created Nodes"
 
     for event in events:
         for prev_id, _ in event.prev_events:
             try:
                 end_node = node_map[prev_id]
             except:
-                end_node = pydot.Node(name=prev_id, label="<<b>%s</b>>" % (prev_id,))
+                end_node = pydot.Node(
+                    name=prev_id,
+                    label="<<b>%s</b>>" % (prev_id,),
+                )
 
                 node_map[prev_id] = end_node
                 graph.add_node(end_node)
@@ -117,33 +120,33 @@ def make_graph(file_name, room_id, file_prefix, limit):
             edge = pydot.Edge(node_map[event.event_id], end_node)
             graph.add_edge(edge)
 
-    print("Created edges")
+    print "Created edges"
 
-    graph.write("%s.dot" % file_prefix, format="raw", prog="dot")
+    graph.write('%s.dot' % file_prefix, format='raw', prog='dot')
 
-    print("Created Dot")
+    print "Created Dot"
 
-    graph.write_svg("%s.svg" % file_prefix, prog="dot")
-
-    print("Created svg")
+    graph.write_svg("%s.svg" % file_prefix, prog='dot')
 
+    print "Created svg"
 
 if __name__ == "__main__":
     parser = argparse.ArgumentParser(
         description="Generate a PDU graph for a given room by reading "
-        "from a file with line deliminated events. \n"
-        "Requires pydot."
+                    "from a file with line deliminated events. \n"
+                    "Requires pydot."
     )
     parser.add_argument(
-        "-p",
-        "--prefix",
-        dest="prefix",
+        "-p", "--prefix", dest="prefix",
         help="String to prefix output files with",
-        default="graph_output",
+        default="graph_output"
     )
-    parser.add_argument("-l", "--limit", help="Only retrieve the last N events.")
-    parser.add_argument("event_file")
-    parser.add_argument("room")
+    parser.add_argument(
+        "-l", "--limit",
+        help="Only retrieve the last N events.",
+    )
+    parser.add_argument('event_file')
+    parser.add_argument('room')
 
     args = parser.parse_args()